Ammeraal Beltech Modular

Transcription

1 Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application

2 Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates - Side Flexing Belts page 6 Q3 - Straight Running Belts page 7 Q3 - Side Flexing Belts page 8 Q3 - Chains page 9 Q4 - Straight Running Belts page Q4 - Side Flexing Belts page 12 Q4 - Chains page 13 Q1 updates - Chains page 14 Q1 updates - Side Flexing Belts page 15 Q1 updates - Straight Running Belts page 16 Q2 updates - Chains page 17 Q2 updates - Side Flexing Belts page 18 Q2 updates - Straight Running Belts page Q3 updates - Chains page 21 Q3 updates - Side Flexing Belts page 22 Q3 updates - Straight Running Belts page 23 Q4 updates - Side Flexing Belts page 24 Q1 updates - Chains page 25 Q1 updates - Side Flexing Belts page 26 Q1 updates - Straight Running Belts page 27

3 Content Q2 updates - Chains page 28 Q2 updates - Side Flexing Belts page 29 Q2 updates - Straight Running Belts page 30 Q3 updates - Chains page 31 Q3 updates - Straight Running Belts page 32

4 UPDATES, MODULAR DATASHEETS CHAINS uni 881, uni 8811 Plus +, Page 2: Delete avalibility (x) of machined sprockets uni 1700, uni 1701, uni 1702, uni uni 1701 Tab R Page 1: Change of G-diemnsions + addition of note uni 880 Tab R Page 1: Accessories, Rubber Top: remove K uni 879 Tab R Page 1: Accessories, Rubber Top: remove K uni (all datasheets) Page 2: Delete avalibility (x) of machined sprockets

5 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni RTB Page 1: New drawing of belt uni M-SNB Page 1: G-lock note deleted uni SNB M2 34% Rib Page 3: Change in sprockets table, B-dimensions uni M-TTB 37 % + Page 2: Change in sprockets table: delete x in Pilot Bore for Z19 37% CS uni OPB 4v 23% Page 3: Change in Tab-table: belt material and color uni CSB serie Page 1: Alternative pin & lock material: delete PA& uni CPB Rouh Embedded uni CPB C, Rough, 20% Rough Page 1: Belt material and color table: change from PP UV to PP-I UV Page 2/3: Addition of note in Accessories for Top/Bottom insert, thread: Available insert size M5 + M uni XLB M2 C Page 2: Delete (M2) at Curved drawing uni X-MPB C Page 2: Note: Change from 43.3 (1.70 in) to 42.3 mm (1.67 in) uni ACB serie Page 4: Change in sprockets table uni MPB serie Page 4: Addition of Machined symbol ( ) in sprockets table for Z uni RTB serie Page 1: New and updated corner pictures uni M-SNB M3 14% Page 1: Alternative pin and lock material: G-lock removed uni MPB C Page 3: Addition of Bottom Hold Down Roller Tab

6 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS BELTS uni Flex ASB Curved Page 1: Change of T-dimensions + change of T to X Surface 43% Open Radius 2.5/3.0/3.5/ uni Flex ONE Last page change from Two way to One way uni Flex ASB Page 4: Addition of columns with B-dimension for ASB CS uni Flex ONE Page 1: Note for uni Flex ONE ER about availability in NA is removed

7 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni QNB Ball New datasheet avaliabe uni OPB serie Accessories, Tab, Bottom Hold Down: change of materials uni CPB Rough Page 1: Updated table, belt widths Embedded uni XLB serie Sprockets table: Z13 sprocket: change of molded to machined

8 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS BELTS uni Flex ASB Curved Page 1: Change of T-dimensions + change of T to X Surface 43% Open Radius 2.5/3.0/3.5/ uni Flex ASB Page 2: Error in table, wrong values (bottom of page)

9 UPDATES, MODULAR DATASHEETS CHAINS uni 881, uni 8811 Plus+, uni 1700, uni 1701, uni 1702, uni 1703 Page 2: Delete avalibility (x) of machined sprockets

10 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni S-MPB N + C Page 2: Accessories, Side Guard: changes in D, E, F, G dimensions uni QNB C + Rough Page 1: Alternative pin and lock materials, endlock: change of material to PA uni OPB 4V 23% Rib Page 2: Accessories, Finger Plates: addition of Type 3 + adding I, J & K dimensions in table below uni Light EP C uni Light EP 8,5 uni Light EP 18 uni Light EP 22 uni Light EP 22% Fine-meshed uni Light EP 28 uni Light EP 33 uni Light EP 46 Page 2: Accessories, Flight table: change of the naming Flat to Non Stick uni S-MPB C Page 4: Sprockets table, Z8: change from molded to machined, new drawing of machined sprocket added uni S-MPB C + N Page 2: Accessories, Side Guard: Dimensions of E changed (in drawing) uni M-QNB Vacuum Page 1: Change from to MTO --> Orange Standard -box changed to blue Belt material & color box: Addition of Recommended uni M-QNB NS Page 1: Removal of Belt and pin material & color POM-SLF White + PP White Pin uni M-TTB 37% Page 1: Removal of Belt material & color material PP Grey uni M-TTB 37% CS Page 1: Addition of Belt material & color material POM-D Blue Addition of Pin material & color material PBT Light Grey New and updated belt width table uni QNB C Page 3: Accessories, Tab: Change to MTO uni S-MPB CS 22% Page 1: Removal of Belt material & color material PE-I Natural uni S-MPB N Page 1: Removal of Belt material & color material PE-I Natural Removal of Pin material & color material PE Natural uni S-MPB C Page 2: Accessories: Belt material & color : removal of material PP White uni SNB M2 20% Page 2: Accessories, Tab: Tab material & color : removal of material POM-D Blue uni SNB M2 50% Page 1: Removal of Belt material & color material PP Grey uni SSB C Page 3: Accessories, Tab: Change to MTO + removal of material PP Grey

11 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni SSB 22%, 32% & 29% Page 1: Change to MTO + Belt material & color box: Addition of Recommended Page 2: Accessories, Rubber Top: Change to MTO uni L-SNB 36% Page 1: Removal of Belt material & color material PP Natural Removal of Pin material & color material PP Natural uni L-SNB 36% Page 1: Removal of Belt material & color material POM-LF Brown New belt width table uni CPB Rough Embedded Page 1: Removal of Belt material & color material PP-I UV White New belt width table uni CSB C, 8% + 8% Rough Page 1: Removal of Belt material & color material PP Dark Grey New belt width table Page 2: Change to MTO uni MPB 16% Page 1: Removal of Belt material & color material PE-I Natural Removal of Pin material & color material PE White New belt width table uni MPB RO Page 1: Change to MTO uni M-SNB M3 14% Page 1: Removal of Belt material & color material PE Natural Removal of Pin material & color material PE White New belt width table Page 2: Accessories, Rubber Top: Flat, removal of the last row PP Grey and 03 Black uni Light serie Page 2: Accessories, Rubber Top, addition of the words Non standard and standard in drawings uni MPB C Page 1: Addition of new material in Belt material & color table: NBWR White New and updated belt width table with NBWR

12 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS BELTS uni Flex ONE serie Page 7: Change in Pitch diameter & overall diameter columns uni Flex SNB serie Page 4: Updated belt table: uni Flex SNB W R2.3 / uni Flex SNB WO R2.3 Page 4: Updated belt table: uni Flex SNB WT R2.3 PBT pins Page 5: Updated belt table: uni Flex SNB WT R2.3 SS pins uni Flex ASB Page 3: Accessories, Side Guard: T-dimensions added uni Flex ASB Radius uni Flex ASB CS Radius uni Flex L-ASB Page 1: Removal of Belt material & color material PP White uni Flex ASB Page 2: Removal of Belt material & color materials 43% Open Curved Surface Radius 2.2: POM D White 43% Open Tab Curved Surface Radius 2.2: POM D White + Blue 43% Open Edge Radius 2.2: Change to MTO

13 UPDATES, MODULAR DATASHEETS CHAINS uni 881 Bevel Page 2: Change from STANDARD to NON STANDARD + uni 881 Bevel v uni 2600 CV Page 1: Note about product supports added

14 UPDATES, MODULAR DATASHEETS CHAINS uni 2600 C uni 2600C Tab Page 1: Accessories, Rubber Top: no longer NON STANDARD uni 963 Change online was set to Standard, now changed to Non Standard

15 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS BELTS uni Flex SNB Page 7: Accessories, Flight / Standard (in table) Change from flat to Flat Click on Flight Accessories, Support / MTO Click on Flight Low, Support material & color: change from POM-D White to POM-D Neutral

16 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni JCB Page 1: Pin material & color, solid lock: change to blue Note below material table changed to: *Only for K200 / K300 chain Beltc width-table: addition of chain in 50.3 and 75 mm Min No drive sprocket per shaft : change from 1 to 2 in 50.3 mm uni ACB serie Page 1: Pin and lock material & color changed from Natural to Blue uni LPB Page 1: Change in Surface Type -note in information box in top of the page uni S-MPB C Page 2: Accessories, Rubber Top: Rubber material & color: Natural removed Accessories, Flight, Material & Color: POM-D changed to POM-DI uni S-MPB N Page 2: Accessories, Flight, Material & Color: POM-D change to POM-DI uni SNB M2 34% Page 1: Alternative pin and lock materials, Endlock: change from PP to PP-I uni SNB M2 34% Rib Page 1: Alternative pin and lock materials, Endlock: change from PP to PP-I uni OPB 4V 23% Fine-meshed Page 2: Accessories, Side Guard, Material & color: change from PP to PP-I uni M-TTB Page 2: Accessories, Rubber Top: new note added: Backflex radius for Rubber Top: 28 mm (1.10 in) uni QNB Ball Page 1: Ball material & color: now available in blue

17 UPDATES, MODULAR DATASHEETS CHAINS uni 963 Changed in online filtering from Standard to Non Standard uni 1843 Page 1: Info changed in box for Permissible Tensile Strength uni 881 Tab v2 Page 1: Min radius, K325: change from 200 mm to 190 mm uni 512 Plus + Single Hinge Page 2: Updated sprockets table uni 821 Page 2: Sprockets: Z19 Molded Cast Iron not avaliable uni 879 Tab Safety Finger Page 1: Accessories, Product Support: addition of NON STANDARD uni 2600 Tab C Page 1: Accessories, Rubber Top: NON STANDARD removed uni 982 SC Page 1: Standard shipping lengths changed to 4.0 m (13.1 ft)

18 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS BELTS uni Flex ASB Page 1: Change of running direction for uni Flex ASB 43% Open Radius 1.6 and uni Flex ASB 43% Open Radius uni Flex SNB Page : Table for Belt material & color, cell for: uni Flex SNB CR Rubber Top R1.6 uni Flex SNB CI Rubber Top R2.3 uni Flex SNB C Rubber Top R2.3 = I deleted in naming of: uni Flex SNB C Rubber Top R2.3 = cells splitted up, PP White deleted + PP Blue deleted

19 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni NTB Page 1: Change in note in table Page 2: Hub diameter changed uni M-OWL 40% Open Page 2: Bore size Z19: changed to 25.4 (1.00 in) uni Light EP 22% Page 4: Column for pilot bore: x es added Fine-meshed uni SSB C Page 4: Pitch diameter, Z31 changed uni OWL 66% Page 2: Column for pilot bore: x es added uni S-MPB C Page 4: Bore size Z20: changed to machined + change of hub diameter New drawing of machined sprocked added uni LPB Rough Page 1: Notes below table: change from NLAS to NL uni OPB 4V 23% Rib Page 2: Accessories, Finger Plates, Table: Change from Single SIded to Double sided in 2nd row uni OPB 4V 23% Fine Meshed Page 2: Accessories, Flight, Flight material & color: PP White changed to PP-I White uni MPB Flights Page 3: Bent, Material & Color, PE-I Natural changed to PE Natural Page 4: Flat 22%, Material 6 Color: PE-I white changed to PP-I white uni CSB serie Page 2: Accessories, Rubber Top: change from Flat to Flat Rib uni ACB Rough uni ACB 2% Rough (POX FR) uni CSB Rough uni CSB 8% Rough uni XLB M2 15 Rough uni XLB M2 C uni XLB M2 Rough Page 1: Pin & lock material and color: change (for belt material POX FR) to PBT LG + change in belt width table to PBT Page 1: Pin & lock material and color: change to PBT LG + change in belt width table to PBT Page 2: Accessories, Rubber Top: change from Curved to Curved Rib uni XLB serie Page 3: Change i sprockets table from molded to machined sprockets for Z13 teeth uni SNB M2 50% Open Page 1: Belt material & color table: change from PA6.6 to PP also in belt width table uni SNB M2 20% + 34% Page 2: Accessories, Flight, 20% Flat/Non stick split up of cells uni ACB Rough (POX FR) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POM-EC Accessories, Flight, Car Pusher: removal of POM-NL Page 4: Sprocket table, bore size: change from molded to machined uni ACB Rough (POM NL) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POX-FREC Accessories, Flight, Car Pusher: removal of POX FR Page 4: Sprocket table, bore size: change from molded to machined

20 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni ACB 2% Rough (POX FR) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POM-EC Accessories, Flight, Car Pusher: removal of POM-NL Page 4: Sprocket table, bore size: change from molded to machined uni ACB 2% Rough (POM NL) Page 2: Accessories, Top/Bottom Insert, Electrical Conductive: removal of POX-FREC Accessories, Flight, Car Pusher: removal of POM-FR Page 4: Sprocket table, bore size: change from molded to machined uni CSB serie Page 3: Addition of Accessories, Side Guard uni LPB Rough Change online was set to Non-standard, now changed to Standard uni Flex ASB Edge R2.2 Change online was set to Standard, now changed to Non-standard

21 UPDATES, MODULAR DATASHEETS CHAINS uni 843 uni 1873 Grip G3 uni 1873 ST uni 963 Tab Change of material from: POM-D to POM-DI POM-LF to POM-LFI Update of: uni Rubber Profile overview for chains at the website.

22 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS uni Flex ASB serie Page 1: All uni Flex ASB datasheets do now have their own datasheet --> divided from 1 to 6 datasheets

23 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni QNB Ball Page 1: Change of Ball material & color from write to blue Change of profile picture also updated online

24 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS uni Flex L-OSB 65% Open Page 3: Sprockets --> width of tooth changed (Radius 2.2) uni Flex ASB serie Sprockets --> ø30 are no longer available for teeth Z uni Flex OSB serie Page 2: Side Gurad --> removal of white material

25 UPDATES, MODULAR DATASHEETS CHAINS uni 1843 Page 1: info box: Standard shipping length changed uni uni 882 Tab Page 1: Accessories, Rubber Top: K1200, x-dimensions changed uni 843 SK + uni 843 SKR Page 1: Standard shipping lengths, no. of roller chain links/box changed uni NH 78 Page 1: uni NH 78 T1 is mentioned in both Standard and Nonstandard material & colors tables --> now only shown in Standard table

26 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS uni Flex SNB Page 2: Belt table, 2nd row: uni Flex SNB C R2.3 removed --> is already mentioned in row just above

27 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni MPB 16% Page 1: Update of belt table uni ACB Rough (POM-NL) uni ACB Rough (POX-FR) Page 1: Update of belt table uni BLB 18% Page 1: Update of belt table uni JCB Y Top Page 1: Update of belt table uni MPB flight Page 2: Non Stick, Material & color: PP-I N removed PE-I W removed 10% Non Stick, Material & color: PP-I N removed PE-I W removed Page 3: Flat 22%, Material & color: PE-I W removed uni CNB serie Page 3: Hub diameter, Z10 dimensions changed uni Light EP Page 3: Accessories, Tab: change of material to POM-D N uni Light Page 3: Accessories, Tab: change of material to POM-D N

28 UPDATES, MODULAR DATASHEETS CHAINS uni uni 882 Tab Page 1: Accessories, Rubber Top, X-dimensions (K1200) changed uni 882 Tab PRR Page 1: J dimensions changed Rubber profiles overview uni Rubber Profile sheet updated as pr 2018

29 UPDATES, MODULAR DATASHEETS SIDE FLEXING BELTS uni Flex L-ASB serie Note about uni AmFlight Overview removed

30 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni ECB uni Flex QNB serie uni CPB C uni SNB M2 uni S-MPB Page 3: Removal of Kleenflight = change from 4 to 2 pages Note about uni AmFlight Overview removed uni S-MPB C Page 1: Addition of POM-DI B Page 2: Accessories, Flight, Addition of POM-DI B Material and Color overview: Page 3: POM-XRD White material removed, Neutral material added

31 UPDATES, MODULAR DATASHEETS CHAINS uni 880 Page 1: Accessories, Rubber Top K350 width removed Aug 31st 2018 Rubber Profile Overview updated

32 UPDATES, MODULAR DATASHEETS STRAIGHT RUNNING BELTS uni QNB C + uni QNB Rough Page 3: Accessories, Non standard Tab Single Link Only uni ACB serie Page 1: L-dimensions changed

33 Date: Conveyor Belts Seamless Belts Modular Belts Timing Belts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission Belts Fabrication & service Global Headquarters: Ammeraal Beltech Holding B.V. P.O. Box 38, 1700 AA Heerhugowaard The Netherlands T F info@ammeraalbeltech.com