Concentric butterfly valves - Series 900
|
|
|
- Virgil Stewart Wilson
- 5 years ago
- Views:
Transcription
1 oncentric butterfly valves - Series 900 rawing tem Name 1 Body 2 isc 3 Seat 4 Shaft 5 Pivot 6 Bushing 7 istance ring 8 istance ring 9 Pin 10 Retaining screw 11 Shaft O-ring 12 Pivot O-ring odification B Version of body B = wafer T = lug = double flange Material of disc 0 Brass Aluminium bronze Stainless steel (8) 3 uctile iron (40) 4 Stainless steel (8M) 5 ASTEOY 6 Stainless steel (Uranus B6) 7 Titanium Material of seat 1 NBR 2 EPM 3 arboxylic NBR 4 VTON (PM) 5 Silicone Steam 6 Silicone (UMQ) 7 NBR BT 8 YPAON (SM) Series name Series 900
2 oncentric butterfly valves - Series 900 Available connections NSTAATON BETWEEN ANES ( ) Vers. 32/ PN 6 B PN10 PN16 lass 150 PN T PN10 PN16 lass 150 *or S 5K/10K, please consult with manufacturer. standard upon request NSTAATON BETWEEN ANES ( ) Vers PN 6 B PN 10 PN 16 PN 6 T PN 10 PN 16 * or S 5K/10K, please consult with manufacturer. standard upon request Torque chart (Nm) OPERATN TORQUES UPON WORKN PRESSURE (NM)* 32/ PMA 6 bar PMA 10 bar PMA 16 bar The above mentioned torques are valid for valves with EPM seat only, and under the condition that the working medium is liquid. While actuating the valve, the above mentioned figures should be multiplied by a coefficient of 1,2. Using a NBR seat, it is necessary to apply a coefficient of 1,8 for dimensions up to 300 and a coefficient of 1,32 for dimensions 350 and above. n case the medium is gaseous, or if it contains abrasive particles, it is necessary to apply a secondary coefficient of 1,35. f the working conditions are specific, it is recommended to discuss the selection of the actuator with the manufacturer. Series as recycling application Series Biogass application
3 oncentric butterfly valves - Series 900 KV chart and curve 1 KV = 0, V Valve size - isc Position (degrees) mm inch /40 1 1/2 0, , , /2 0, , , , , KV ,1 isc Position (degrees) 32/
4 oncentric butterfly valves - Series 900 Application Butterfly valves Series 900 are suited for many applications where tight shut-off is required, such as: ndustrial Processing Paper Mills Water and Wastewater ood and Beverage ry Bulk onveying VA (eating, Ventilation & Air onditioning) ight Slurry andling Models Wafer type B ug type T ouble flanged type () or eneral characteristics oncentric design Shut-off and regulating device Split shaft Pivot fixed by pin allows demounting (demountable version) ong neck of the body according to eating Systems Regulation standards Orange epoxy painting RA μm Vacuum max 0,2 bar absolute Movement of disc ensured by four-squared endstem Materials tem Name Material 1 Body 2 isc 3 Seat uctile iron (40) epoxy coated arbon steel (A216 WB) ow carbon content steel (A352 ) Stainless steel (8M) Brass Aluminium bronze Stainless steel (8) uctile iron (40) Stainless steel (8M), AAR coating is an option ASTEOY Stainless steel (Uranus B6) Titanium NBR EPM arboxylic NBR VTON (PM) Silicone Steam Silicone (UMQ) Epichlorohydrin YPAON (SM) 4 Shaft Stainless steel (AS 420) 5 Pivot Stainless steel (AS 420) 6 Bushing Brass (up to 300) elrin (from 350) 7 istance ring Stainless steel 8 istance ring Stainless steel 9 Pin Stainless steel (AS 316) 10 Retaining screw Zinc coated steel Stainless steel 11 Shaft O-ring NBR, EPM is an option 12 Pivot O-ring NBR, EPM is an option Standards EAK TEST: EN , ASS A SO 5208, ASS A AP 598, TAB. 5 AE TO AE A.: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 TOP ANE: EN SO 5211 ONNETON BETWEEN ANES: EN ASME B16.5 WORKN STANAR: EN A1 oating Orange epoxy painting RA μm Based on customer s request, higher degree of coating can be provided Working conditions Temperature range: ( ), based on material selection bar Max. working pressure 10 bar (16 bar upon request) Note to temperature Standard and testing Test procedures are established according to: EN , SO 5208, AP 598, ANS/ 70-2 Manufacture according to the requirements of the European irective 97/23/E Equipment under presssure (ategory, modul B) Actuation possibilities andlever Manual gearbox with handwheel Electric actuator 24V, 230V, 400V, other upon request Pneumatic actuator o single acting o double acting When temperature of medium increases over (248 ), the maximum allowed pressure falls from 16 bar to 14,4 bar When temperature of medium increases over (248 ), the maximum allowed pressure falls from 16 bar to 14,4 bar and from 10 bar to 9 bar.
5 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 B ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Bare shaft x K ( M) P( Q) R M PN 6 PN 10 PN 16 mm inch A B n n n K M P Q R Weight (kg) / , / , , /2 153, , , , , , ,5 6, ,5 8, , , , , , , , Ø , Ø Ø
6 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 B ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 andlever andlever: Maximum working pressure: 6 bar PN 6 PN 10 PN 16 mm inch A B n n n Weight (kg) / , / , , /2 153, , , , , , , , , , , , ,4
7 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 B ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 earbox with manual handwheel K M PN 6 PN 10 PN 16 mm inch A B n n n K M Weight (kg) / , / , , /2 153, , , , , , , , , , , , , , , , , , ,8
8 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 B ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Pneumatic actuator PN 6 PN 10 PN 16 mm inch A B n n n Weight (kg) / , / , , /2 153, , , , , ,5 92, , , ,5 110, , , , , , , , , , , imensions for double acting pneumatic actuator, ppneu = 5,6 bar, medium: water, p = 10 bar, T = 20 (68 ).
9 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 T ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Bare shaft x K P( Q) R E M PN 10 PN 16 mm inch A B E n n K M P Q R Weight (kg) / M M , / M M , M M , /2 153, M M , M M , , M M , , M M ,5 9, M M ,5 10, M M , M M , , M M , , M M , M M , M M Ø
10 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 T ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 andlever andlever: Maximum working pressure: 6 bar E PN 10 PN 16 mm inch A B E n n Weight (kg) / M M , / M M , M M , /2 153, M M , , M M , , M M , , M M , , M M , M M , M M , M M ,2
11 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 T ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Manual gearbox with handwheel K M E Pn 10 PN 16 mm inch A B E n n K M Weight (kg) / M M , / M M , M M , /2 153, M M , , M M , , M M , , M M , , M M , M M , , M M , M M , M M , M M M M ,7
12 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 T ace to face dimension: EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Pneumatic actuator E PN 10 PN 16 mm inch A B E n n Weight (kg) / M M , / M M , M M , /2 153, M M , , M M , , M M ,5 92, , , M M ,5 110, , M M , , M M , M M , M M , M M , M M , M M ,5 imensions for double acting pneumatic actuator, ppneu = 5,6 bar, medium: water, p = 10 bar, T = 20 (68 ).
13 oncentric butterfly valve - Series Technical details oncentric butterfly valve series 900 ace to face dimension (double flange version): EN 558, SERES 20 SO 5752, SERES 20 AP 609, TABE 2 Manual gearbox with handwheel K M PN 6 PN 10 PN 16 mm inch A B n n n K M Weight (kg) , , , , , , ,5 imensions for water, p = 10 bar.
SERIES 900 // PN 6/10/16/Class 150 // DN (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air
BsOlute flow control SERIES 900 // PN 6/10/16/Class 150 // DN 32-1600 (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air INTERFLNGES BUTTERFLY VLVES GENERL INFORMTION GENERL
RESILIENT SEATED BUTTERFLY VALVES
GRIP THAT HOLDS SERIES 900 // PN 6/10/16/Class 150 // NPS 1 ¼ - 64 // Industrial applications // Water, chemicals, gas // Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION
RESILIENT SEATED BUTTERFLY VALVES
GRIP THAT HOLDS SERIES 900 // PN 6/10/16/Class 150 // DN 32-1600 (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Short Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014
Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM
Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
RESILIENT SEATED BUTTERFLY VALVES
SERIES 900 Class 150 // PN 6/10/16 NPS 1¼ 64 (DN 32 1600) Industrial applications RESILIENT SEATED BUTTERFLY VALVES WWW.ABOCONTROLS.COM GENERAL INFORMATION INTRODUCTION TO SERIES 900 ABO Series 900 are
KEYSTONE SERIES GRF RESILIENT SEATED BUTTERFLY VALVES
KEYSOE SEIES G ESIIE SEE UEY VVES heavy duty double flanged concentric design resilient seated butterfly valve EUES GEE IIO hese valves are for water or air service where a drop-tight shut-off and double
The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
Butterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 110 C ( 130 C temporarily ) Max Pressure
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
RESILIENT SEATED BUTTERFLY VALVES
SERIES 900 PN 6/10/16 // Class 150 DN 32 1600 (NPS 1¼ 64) Industrial applications Water, chemicals Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION INTRODUCTION TO
Bonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
Double Offset Butterfly Valve
General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire
ABsOlute flow control. SERIES 3E // DN (6-16 ) // Oil & Gas // Power Generation // Petrochemistry
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
Mono Flanged Type Long Face to Face
Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves
61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
KEYSTONE FIGURE 9 BUTTERFLY VALVE
A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to
WAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
ptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
Keystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
Materials : Ductile iron body EN GJS, carboxylic NBR seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 90 C Max Pressure : 16 Bars Specifications : Long neck for isolation
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation
*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
KEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES
VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES GENERAL CHARACTERISTICS: BS EN 593 CONSTRUCTION: Body: ENGJL Cast Iron (GG25) Disc : Stainless Steel Seat : EPDM, NBR, FPM (Viton) Stem : XCr13 (Stainless
Keystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
AKZG50E4SGL. Materials : Ductile iron EN GJS 500-7, food silicone seat. *the installation defects and wear defects are not covered by the guarantee
AKZG50E4SGL Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications
Keystone resilient seated butterfly valves Figure 221 and 222
Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full
Keystone Figure 9 Butterfly Valve
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
Materials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Long neck for isolation Wafer
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble
Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges PN10/16-15 C + 110 C ( 130 C C temporarily) Max Pressure : 16 Bars up to DN300, 10 bars over Specifications
VTB 200 Butterfly valves
VTB 200 Butterfly valves Adress http://www.vapo.nl Vapo Techniek BV Esp 258 5633 AC Eindhoven Netherlands T: +31(0)40 248 10 00 F: +31(0)40 248 10 40 E: vapo@vapo.nl Table of Contents VTB200 3 General
Size : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS...
MADE OF STAINLESS... Reinforced lug from DN200 to DN1400 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-10 C ( with EPDM seat ) + 110 C ( with EPDM seat ) Max
Keystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
KEYSTONE OPTISEAL WAFER AND LUGGED
A resilient seated butterfly valve for general purpose applications FEATURES GENERAL APPLICATION Food and beverage processing, dry bulk conveying, paper mills, slurry handling etc. Grease or silicone free
Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 50-300 2 components DN 350-500 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data 5 technical data 5 KA series 6 components DN 40-300 6
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Materials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
Materials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN16 up to DN300-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
WAFER BUTTERFLY VALVES
WAFER BUTTERFLY VALVES Actuator flange accomodate all type of operators; handle, gear, electric and pneumatic actuator Strong precision key gives positive attachment for manual lever or actuator. Shaft
Materials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
Materials : Ductile iron EN GJS body, EPDM seat
Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications
BrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
BUTTERFLY VALVES PTFE SEATED
BUTTERFLY VALVES PTFE SEATED ghibsonvalves.com BUTTERFLY VALVES PTFE SEATED PTFE body seat has a thickness varying from 2,5 to 3 mm depending on the position, even in the shaft area. Discs are available
LUG BUTTERFLY VALVE PN10/16
LUG BUTTERFLY VALVE PN10/16 Model/Ref: 1133 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 600 Between flanges ISO PN10/16-10 C + 110 C ( 130 C C temporarily) Max
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
Materials : Ductile iron EN GJS body, EPDM seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck
> CR-TEC Butterfly Valves
> Butterfly Valves > Butterfly Valves Resilient Seated Series CRV37 Bi-Directional, 100% Tight Shut Off, Low Torque Equipped with Manual Handle, Gearbox Handwheel, or Pneumatic or Electric Actuators. 2
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C (with EPDM seat ) + 110 C ( with EPDM seat ) Max Pressure : 16
Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron.
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
Materials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
GRW/GRL Sizes NPS 2-36
KEYSTONE The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-toface dimension, according
SIL. BIANCA - Butterfly valve DN Description. Product features
Description Centric butterfly valve plastomer lined for On/Off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 3-600 B3
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
BUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
Size : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA
TECNICA DATA Nominal diameter: 0 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series Flange accommodation: DIN 1 PN /1 ap-joint flange: DIN 21 and DIN 22 Weld-on flange: DIN 27
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
Materials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
Keystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
Centered disc butterfly valves with AMRING elastomer liner. 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631
Type series booklet 8444.1/9 -- 10 ISORIA 10 Centered disc butterfly valves with AMRING elastomer liner 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631 Applications
S-GATE type KNIFE VALVE with PNEUMATIC ACTUATOR. DN 450 to 600. See below. 5 bar min. / 7 bar max. Prohibited use on gases of group 1 for DN>100
CHARACTERISTICS The S-GATE knife valve is equipped with a pneumatic actuator and is dedicated to the automatic shut-off of loaded fluids such as slurries and powdery materials. The standard application
STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
Materials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
BUTTERFLY VALVES + SA ACTUATOR
1150-1183 BUTTERFLY VALVES + SA ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron. The different
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional