The newly redesigned FloorPort

Transcription

1 FloorPort Service Fittings & Accessories New Redesigned FloorPort Service Fittings Supply the Versatile Workstation Protection from water, dirt, and debris. The newly redesigned FloorPort Service Fittings for Resource RFB Floor Boxes, Walkercell Cellular Raceway, and Walkerdeck Systems provide flexibility in recessed and partition furniture feed applications. The redesigned FloorPort meets all UL requirements for scrub water exclusion on tile, carpet and wood-covered floors. These covers are ideal for use in a wide variety of applications including educational facilities, airports, and commercial and institutional office buildings. The covers are UL Listed to U.S. and Canadian safety standards, and are fire classified for use on Walkerdeck Systems and Cellular Decking Systems in accordance with Floor-Ceiling Design Numbers D739, D832, and D858. Consult the factory for specific fire classified designs. FloorPort flush and recessed activations for power and communication. Flanged and flangeless styles. Flanged version is used on carpeted floors to prevent fraying of carpet, or in applications where the cover will be exposed to heavy loads. TopGuard Protection. An integral design which keeps out water, dirt, and debris from the power and communication compartments. Whenever you see the TopGuard Protection icon applied to any Wiremold product, you know that the product meets and exceeds the UL scrub water exclusion requirement. Vertical adjustment. Afterpour adjustment compensates for uneven surfaces, providing a consistent finished floor. All metal construction. All component parts are either die-cast zinc or die-cast aluminum to provide high durability and load capacity. Easy to operate lid. One-piece lid activated by single push tab to allow complete and easy access to devices. Features & Benefits Two large egress openings. Provides additional space and flexibility for both power and communication cable egress. Positive stops on egress blocks in open (up) position provide added protection to cables. New finish options. Now available in a brushed aluminum finish and plated brass finish, along with painted options, which provides more aesthetic alternatives. Partition feed options. Available with 1" trade size screw plug, and one combination 1 1/4" and 2" trade size screw plug. Provides large capacity for feeding both power and communication cabling. Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. ED1144R2 Updated February 2005 For latest specs visit

2 Catalog No./Item Description/Specifications S38CCTCAL Flanged Cover Assemblies S38CCTCBS Available in die-cast aluminum S38CCTCBK assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Insert area in lid allows for carpet or tile cutouts to match finished floor. 6 9/16" [167mm] FloorPort Flanged Cover Assemblies Catalog No./Item Description/Specifications S38BBTCAL Flanged Cover Assemblies S38BBTCBS Available in die-cast aluminum S38BBTCBK assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Lid area is flush with the finished floor, no cutouts provided. 6 9/16" [167mm] 7 3/4" [197mm] 7 3/4" [197mm] S38PPTCAL S38PPTCBS S38PPTCBK 6 9/16" [167mm] Flanged Partition Feed Cover Assemblies Available in die-cast aluminum assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Provided with one 1" trade size screw plug for power or communications type cabling, and one combination 1 1/4" and 2" trade size screw plug for communications type cabling. Allows for feeding of both power and communication cabling. NOTE: New FloorPort covers and flanges are now supplied with a brushed aluminum (AL) or plated brass (BS) finish replacing the painted finishes on the old version. 7 3/4" [197mm] Catalog Number Key S3XXXXXXX S3 = FloorPort Redesign Family 8 = Flanged 9 = Flangeless CC = Cutouts for tile or carpet inserts BB = Solid lid to be flush with finished floor PP = Solid lid with partition feed openings AL = Brushed Aluminum Finish BS = Plated Brass Finish BK = Painted Black Finish TC = UL Approved for Tile and Carpet Floors 2

3 Catalog No./Item Description/Specifications S39CCTCAL Flangeless Cover Assemblies S39CCTCBS Available in die-cast aluminum S39CCTCBK assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Insert area in lid allows for carpet or tile cutouts to match 5 9/16" finished floor. [142mm] FloorPort Flangeless Cover Assemblies Catalog No./Item Description/Specifications S39BBTCAL Flangeless Cover Assemblies S39BBTCBS Available in die-cast aluminum S39BBTCBK assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Lid area is flush with the finished floor, no cutouts provided. 5 9/16" [142mm] 6 3/4" [171mm] 6 3/4" [171mm] S39PPTCAL S39PPTCBS S39PPTCBK 5 9/16" [142mm] 6 3/4" [171mm] Flangeless Partition Feed Cover Assemblies Available in die-cast aluminum assembly with brushed aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Provided with one 1" trade size screw plug for power or communications type cabling, and one combination 1 1/4" and 2" trade size screw plug for communications type cabling. Allows for feeding of both power and communication cabling. NOTE: New FloorPort covers and flanges are now supplied with a brushed aluminum (AL) or plated brass (BS) finish replacing the painted finishes on the old version. Load Capacities for FloorPort Cover Assemblies Catalog Numbers Maximum Load in Pounds S38CCTCAL 1000 S38CCTCBS 1500 S38CCTCBK 1500 S38BBTCAL 750 S38BBTCBS 1000 S38BBTCBK 1000 S38PPTCAL 1000 S38PPTCBS 1500 S38PPTCBK 1500 S39CCTCAL 1000 S39CCTCBS 1500 S39CCTCBK 1500 S39BBTCAL 750 S39BBTCBS 1250 S39BBTCBK 1250 S39PPTCAL 1000 S39PPTCBS 1500 S39PPTCBK 1500 *Load applied through a 2" [51mm] mandrel in center of service fitting. 3

4 Catalog No./Item PKKIT FloorPort Partition Feed Barrier Kits Description/Specifications Barrier Kit Used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. For use on PK Presets (Walkercell, Walkerdeck). Kits are sold separately. Catalog No./Item RFBCIKIT Description/Specifications Barrier Kit Used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. For use on RFB4-CI Floor Boxes only. Kits are sold separately. RFBKIT Barrier Kit Used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. For use on RFB4 and RFB4-SS Floor Boxes. Kits are sold separately. FloorPort Activation Accessories for Use with Walkercell and Walkerdeck Systems Catalog No./Item WPACR-1G (Shown) DTB-2-2A (Not Included) Description/Specifications Internal Bracket Two duplex receptacle brackets, receptacle insulators, power grommets, and bend radius control grommets. For use with recessed activations. Communication brackets ordered separately. See next page. WPACR-2G WPACR-3G Bend Radius Grommet Bend Radius Grommet Internal Bracket Two 15A, 120V duplex receptacles, two duplex receptacle brackets, receptacle insulators, power grommets, and bend radius control grommets. For use with recessed activations. Communication brackets ordered separately. See next page. Internal Bracket Two 20A, 120V duplex receptacles, two duplex receptacle brackets, receptacle insulators, power grommets, and bend radius control grommets. For use with recessed activations. Communication brackets ordered separately. See next page. 4

5 Catalog No./Item Description/Specifications DTB-2-2A Communication Bracket Plastic clips on back of bracket provide cable storage loop. For use with WPACR. Activate 2A jacks snap directly into bracket. Communication Brackets Catalog No./Item Description/Specifications DTB-2-4TKO Communication Bracket Four knockouts for RJ style jacks. For use with WPACR. Wiremold open inserts sold separately. DTB-2-B Communication Bracket Blank bracket for customization in field. For use with WPACR. Wiremold open inserts sold separately. DTB-2-2AB Communication Bracket DTB-2-2RT Bracket for Activate (AB) or Ortronics (RT) devices. Ortronics and Activate bezels included. Bend Radius Control Grommets Catalog No./Item PKGRBR Description/Specifications PK Preset Grommet Bend radius control grommet used with PK preset. Maintains 1 1/4" [32mm] minimum cable lay-in radius. NOTE: Not for use with communication brackets DTB-2-2AB or DTB-2-2RT. 5

6 FloorPort Bracket Compatibility Fittings intended for a cellular raceway system must have a minimum of 2 1/2" [64 mm] of concrete topping over the top of the deck. A typical UL Fire Classified floor activation will consist of the following components: PK Series Preset Inserts ( ) Maximum Quantity of Units Allowed Inside of Preset Insert COVER ACTIVATION BARRIER COMMUNICATION ASSEMBLY ASSEMBLY ASSEMBLY BRACKET S38BB S38CC S39BB (1) WPACR (2) DTB-2 S39CC S38PP (1) PKKIT (1) DTB-2FP S39PP 6

7 Notes 7

8 Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold Cable Management Systems. They are: Ortronics TracJack and Series II Modular Connectivity Solutions Pass & Seymour Activate Modular Inserts Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component: Ortronics Connectivity TracJack Individual Jack System Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Choice of 13 colors and color matched to Wiremold Systems Universal T568A/B wiring format Series II Front-Loading, Module System Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video Available Category 3, 5e, 6, USOC 6-position, and other media Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit Pass & Seymour Legrand Network Wiring Activate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems Available Category 3, 5e, 6, as well as 6-position USOC Universal T568A/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit Open Connectivity Solutions Wiremold Open System Communications Modules Accommodate a wide range of manufacturers communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Lucent) and NORDX Modules insert into a wide range of Wiremold Systems Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative. Wiremold / Legrand U.S. and International: 60 Woodlawn Street West Hartford, CT FAX Outside U.S Canada: 570 Applewood Crescent Vaughan, Ontario L4K 4B FAX Copyright 2005 Wiremold / Legrand All Rights Reserved ED1144R2 Updated February 2005 For latest specs visit