Repair Parts for Check-Mate 250cc Displacement Pumps
|
|
- Claribel Holt
- 5 years ago
- Views:
Transcription
1 Repair Kit Repair Parts for Check-Mate 0cc Displacement Pumps 349G EN With priming piston and Severe Duty or MaxLife rod and cylinder. For professional use only. Not for use in explosive atmospheres. Important Safety Instructions Read all warnings and instructions in manual 337. Save those instructions. See manual 337 for complete disassembly and reassembly instructions.
2 KEY: Torque to 39-7 ft-lb (33-3 N m) Torque to 9- ft-lb (8- N m) 3 Torque to ft-lb (4-87 N m) 4 Torque to 7-79 ft-lb (9-07 N m) Torque to 9-0 ft-lb (4-38 N m) Torque to 7-3 ft-lb (77-8 N m) 7 Torque to ft-lb (7-8 N m) 8 Apply thread sealant L: Piston Check Valve Assembly M: Throat Packings N: Intake Valve Packings Lubricate all soft seal components before installation M (-8) M (-7) , , N (34-37) TI088B 349G
3 Parts Ref. Part Description Qty. 73 KIT, rod, displacement; chrome (includes 8, ) 74 KIT, rod, displacement; MaxLife (includes 8, ) 0 KIT, outlet, housing (includes 8,, 47, 49, ) 0 KIT, outlet, housing, SST (includes 8,, 47, 49, ) CARTRIDGE 894 CARTRIDGE; SST O-RING GLAND, packing female; see Packing GLAND, packing, u-cup; see Packing V-PACKING; PTFE; see Packing 3 SPACER, u-cup; see Packing 7 V-PACKING; UHMWPE; see Packing SPACER, acetal; see Packing 8 GLAND, packing male; see Packing 9 NUT, packing, open CUP, wet, enclosed CUP, wet; SST 0 COVER, wet cup 0409 O-RING SIGHTGLASS 3 COVER, oil hole 4 SCREW, socket hd cap; M x 3 WIPER, wet cup cover SEAL, wet cup cover 7 CYLINDER, pump CYLINDER, pump, MaxLife O-RING HOUSING, valve HOUSING, valve; SST 0 SEAT, valve 8949 SEAL, KIT, intake housing (includes ) KIT, intake housing; SST (includes ) 3 SEAT, piston 4 ROD, piston ROD, piston; MaxLife 7378 PISTON SEAT, piston 8 M GUIDE, piston M3 GUIDE, piston; SST 9 BEARING, guide Ref. Part Description Qty. 30 SEAT, piston 3 SEAL, piston; see Packing 3 VALVE, intake 33 NUT, packing NUT, packing; SST 34 GLAND, male, piston; SST; see Packing 3 V-PACKING; see Packing 3 V-PACKING; PTFE; see Packing V-PACKING; leather; see Packing 37 GLAND, female, piston; SST; see Packing 38 SEAL, valve 39 HOUSING, valve HOUSING, valve; SST 40 PLUG, valve PLUG, valve; SST 4 HANDLE, outlet bleed 4 CLIP, outlet bleed LABEL, warning 844 LABEL, warning SCREW, drive SCREW, drive TAG, instruction, safety PLUG, pipe 97 PLATE, identification 0 PLUG, pipe Model L0CS only. Model L0CM only. Model L0SS only. Model L0SM only. See table. Replacement Danger and Warning labels, tags, and cards are available at no cost. 349G 3
4 The following table indicates which parts (according to reference number) are included in each kit. Reference Numbers Kit G
5 Kit Descriptions Kit Description 3 Complete Seal Kit, L0CS 4 Complete Seal Kit, L0CM Complete Seal Kit, L0SS Complete Seal Kit, L0SM 8 Throat Seal Kit, L0CS 9 Throat Seal Kit, L0SS 30 Throat Seal Kit, L0CM and L0SM 3 Piston Kit 43 Intake Soft Seal Kit, L0CS 44 Intake Soft Seal Kit, L0CM 4 Intake Soft Seal Kit, L0SS 4 Intake Soft Seal Kit, L0SM 4 Piston Seal Metal and Soft Kit Intake Valve Seal Metal and Soft Kit; L0CS Intake Valve Seal Metal and Soft Kit; L0CM 3 Intake Valve Seal Metal and Soft Kit; L0SS 4 Intake Valve Seal Metal and Soft Kit; L0SM 73 Displacement Rod Kit, L0CS and L0SS 74 Displacement Rod Kit, L0CM and L0SM 83 Priming Piston Rod Kit; L0CS 84 Priming Piston Rod Kit; L0CM 8 Priming Piston Rod Kit; L0SS 8 Priming Piston Rod Kit; L0SM 97 Cylinder Kit; L0CS and L0SS 98 Cylinder Kit; L0CM and L0SM 0 Outlet Kit; Carbon models 0 Outlet Kit; SST models Intake Housing Kit; Carbon models Intake Housing Kit; SST models Bleed Valve Kit, all Carbon models Kit Description Bleed Valve Kit, all SST models 0 Enclosed Wet Cup Seal Kit; MaxLife, L0CM and L0SM 94 Complete Seal Kit; PTFE Alternative; includes all PTFE alternative kits listed under Packing, page. 98 Enclosed Wet Cup Kit; L0CM 70 Enclosed Wet Cup Kit; L0SM 349G
6 Packing Throat Packings Severe Duty GLAND, packing, female GLAND, packing, female; SST V-PACKING; UHMWPE 3 7 V-PACKING; PTFE 8 GLAND, packing, male GLAND, packing, male; SST MaxLife SEAL, u-cup SPACER, metal 7 SPACER, acetal 7 Severe Duty * Lips face down MaxLife * Lips face down ti093a 7 Intake Valve Packings Severe Duty and MaxLife 34 GLAND, male, priming piston: SST 3 PACKING; UHMWPE 3 PACKING; PTFE (Severe Duty) PACKING; leather (MaxLife) 37 GLAND, female, priming piston Model L0CS only. Model L0CM only. Model L0SS only. Model L0SM only PTFE Alternative * Lips face up ti09a 3 34 GLAND, male, priming piston 3 PACKING, PTFE 4 37 GLAND, female, priming piston ti090a PTFE Alternative 8 GLAND, packing, female V-PACKING, PTFE 8 GLAND, packing, male 34 3 * Lips face up * Lips face down ti090a 8 37 Piston Packings PTFE Alternative ti9a 3 SEAL, piston All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see Original instructions. This manual contains English. MM 349 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES P.O. BOX 44 MINNEAPOLIS MN USA Copyright 007, Graco Inc. All Graco manufacturing locations are registered to ISO Revised February 03
Repair Parts for Xtreme and XP Xtreme 220cc Lowers
Repair Kit Repair Parts for Xtreme and XP Xtreme 220cc Lowers 40892J EN Important Safety Instructions Read all warnings and instructions in manual 72. Save those instructions. 25D2 Full Repair Kit - Graco
More informationRepair Parts for Xtreme and XP Xtreme 180cc Lowers
Repair Kit Repair Parts for Xtreme and XP Xtreme 80cc Lowers 4089J EN Important Safety Instructions Read all warnings and instructions in manual 72. Save those instructions. 25D25 Seal Full Repair Kit
More informationCheck-Mate Displacement Pumps
Instructions - Parts Check-Mate Displacement Pumps 3375H EN With priming piston and Severe Duty or MaxLife rod and cylinder. For professional use only. Not for use in explosive atmospheres. Important Safety
More informationMerkur Displacement Pump
Repair/Parts Merkur Displacement Pump 32792G EN For use with high-performance finishing and coating pumps in hazardous and non-hazardous locations. For professional use only. Important Safety Instructions
More informationPump Package Conversion Kits
Instructions - Parts Pump Package Conversion Kits A0B ENG To install an L00CM or L500CM Check-Mate Displacement Pump on an existing motor. For professional use only. Not for use in explosive atmospheres.
More informationParts. Ultimate NOVAt 395 Ultimate Super NOVAt 495/595 Ultimate MX II 490/495/ R 120 VAC
Parts Ultimate NOVAt 395 Ultimate Super NOVAt 495/595 Ultimate MX II 490/495/595 309704R EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Ultimate Stand Series Lo-boy Series Hi-boy Series
More informationLacquer Conversion Kit
Instructions Important Safety Instructions Read all warnings and instructions in this manual and in the sprayer operation manual. Save these instructions. Lacquer Conversion Kit 56 3933D EN ti870a Lacquer
More informationDISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model
More informationDura-Flo Lowers. Instructions - Parts F ENG. Dura-Flo 1800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers
Instructions - Parts Dura-Flo Lowers 3825F ENG Carbon Steel or Stainless Steel Lowers, with Severe-Duty Rod and Cylinder. Dura-Flo 800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers Important Safety Instructions
More informationRepair D EN. Displacement Pump. Model , Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS
Repair Displacement Pump 312015D EN Model 255198, Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS Maximum Working Pressure 3300 psi (223 bar, 23 MPa) Important Safety Instructions Read
More informationPARTS ST , A, B STX , A, B. Airless Paint Sprayers. Rev. B
PARTS ST 234127, A, B 309715 Rev. B STX 234126, A, B Airless Paint Sprayers 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals ti5875a 234127....... 309710....... 309060; ST....... 309053;
More information3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Related manuals. Vac Make Model * * * Ultra A A A
Parts Ultra 395/495/595 Ultra Max II 490/495/595 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Related manuals 309707L Vac Make Model * * * 230 Ultra 395 234180 9589 B Ultra 495 234183 A 234181
More informationUltra Platinum Sprayers
Parts Ultra Platinum Sprayers Models - For Portable Airless Spraying of Architectural Coatings and Paints - 313565E rev.b Vac Model Hi-Boy 240 Europe 240 Europe Multi-Cord 110 UK 695 257034 795 257037
More informationUniversal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump
Instructions Universal Hand Pump 31758D EN - For transferring grease to Grease Jockey and G3 Systems - Part No. 47886 Hand Operated - 35# Pump 600 psi (4.13 MPa, 41.3 bar) Maximum Working Pressure 85 ml
More informationInstructions Parts List
Instructions Parts List 238944 AND 239692 Hitch Receiver Kits G For Towing Road Lazer Line Striper Guidance Systems. Part No. 238944 Straight Hitch Receiver Kit Part No. 239692 Angled Hitch Receiver Kit
More informationProportioning Pumps. Repair - Parts M EN
- Parts Proportioning Pumps 3068M EN Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. For professional use only. For professional use only. Not for use in explosive atmospheres.
More informationDura-Flo Lowers A
Instructions - Parts Dura-Flo Lowers 311825A Carbon Steel or Stainless Steel Lowers, with Severe-Duty Rod and Cylinder Dura-Flo 1800 (430 cc) Lowers Dura-Flo 2400 (580 cc) Lowers Important Safety Instructions
More informationTrip Rod Repair Kit. Repair Kit C. Part No.: Use with SDP5 & SDP15 (Preset) and Matrix 5 & Matrix 15 Dispense Meters -
Repair Kit Trip Rod Repair Kit 312944C - Use with SP5 & SP15 (Preset) and Matrix 5 & Matrix 15 ispense Meters - Part No.: 255889 Important Safety Instructions Read all warnings and instructions in this
More information390 Airless Sprayer. Parts J EN. Models: , , , , , ,262024, , , , Hi-Boy.
Parts 390 Airless Sprayer 37J EN Models: 253958, 254998, 2209, 25498, 25499, 2539,22024, 2539, 25392, 2548, 82084 Important Safety Instructions Read all warnings and instructions in the Operation and Repair
More informationParts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers
Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use
More informationPARTS. 190ES , A, B, C (Stand) , A, B (Stand) , A, B (Hi-boy) , A, B (Hi-boy) Airless Paint Sprayers. Rev.
PARTS 190ES 232900, A, B, C (Stand) 232901, A, B (Stand) 233797, A, B (Hi-boy) 233815, A, B (Hi-boy) Airless Paint Sprayers 309064 Rev. G 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals
More informationParts. Ultra 395/495/ Rev. E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac. Related manuals. ti3254a
Parts Ultra 395/495/595 309707 Rev. E 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Vac 395 234180 0 495 234183 234181 234182 595 8660 234439 100 495 234186 233974 Related manuals 234180 ti3254a.......
More informationGraco Supply Systems. Sealant and Adhesive Supply Systems
Graco Supply Systems Sealant and Adhesive Supply Systems Graco Supply Systems improve your productivity Discover the next generation of bulk supply systems Graco Supply Systems reliably deliver one-component
More informationColor Change Valve. Instructions Parts List K
Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid
More informationXtreme Lowers. Instructions - Parts List C. High volume lowers for protective coatings.
Instructions - Parts List Xtreme Lowers 3762C High volume lowers for protective coatings. See page 3 for model information, see page 27 for maximum working pressure. Important Safety Instructions Read
More informationGraco Supply Systems. Sealant and Adhesive Supply Systems with NXT Technology
Graco Supply Systems Sealant and Adhesive Supply Systems with NXT Technology Graco Supply Systems with NXT Technology Discover the next generation of bulk supply systems Graco Supply Systems reliably deliver
More informationProportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Model : 2000 psi (13.8 MPa, 138 bar) Maximum Working Pressure
- Parts Proportioning Pumps 3068F Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in this manual and in manuals
More informationST Max 395/495/595 ST Max II 490/495/595
Parts ST Max 395/495/595 ST Max II 490/495/595 309706P EN For professional use only. 3300 psi (22.8 MPa, 228 bar) Maximum Working Pressure See page 2 for model information. Important Safety Instructions
More information15H882 Slider Bearing Kit
Instructions 15H882 Slider Bearing Kit 311616D ENG To replace slider bearings on E-Flo 4-Ball Piston Pumps. For professional use only. Important Safety Instructions Read all warnings and instructions in
More informationAirless Paint Sprayers. Ultra Max 695t. Ultra 695t GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
PARTS 309252H Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Ultra Max 695t Type Series Hi-boy Lo-boy Spray Gun 695t B 245001 245003 243282 695t B 245000 245002 None Ultra
More informationHigh-Flo Lowers. Instructions - Parts List M ENG
Instructions - Parts List High-Flo Lowers 3690M ENG Designed for low pressure, medium volume circulation of finishing materials. For professional use only. Important Safety Instructions Read all warnings
More informationPARTS. Ultra Max 1595 and Mark V Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure. Rev. C
PARTS 309268 Rev. C Ultra Max 1595 and Mark V Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Type Series Model Vac Ultra Max 1595 A 245048 245099 230 100 120 (Japan/Taiwan)
More informationElevators and Pump Supports
Instructions Parts List Elevators and Pump Supports 306287V Used to raise and lower select Graco circulation and supply pumps. For professional use only. 200 psi (.4 MPa, 4 bar) Maximum Air Input Pressure
More informationPump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only.
Instructions Pump/Manifold Kits 311611F ENG To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. See page 2 for a list of available kits. Important Safety Instructions
More informationParts. Ultra Max 1595 and Mark V Airless Paint Sprayers F psi (227 bar, 22.7 MPa) Maximum Working Pressure
Parts Ultra Max 1595 and Mark V Airless Paint Sprayers 309268F 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Type Series Model Vac Ultra Max 1595 A 245048 245099 230 100 120 (Japan/Taiwan) Mark
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096D Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Installation Pressure
More informationDisplacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207 bar, 21 MPa) MAXIMUM WORKING PRESSURE
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308815 Rev. J Displacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207
More informationOld Proportioning Pumps
Repair - Parts Old Proportioning Pumps 311391F For proportioning pumps on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in
More informationGraco Supply Systems. Sealant and Adhesive Supply Systems with NXT Technology PROVEN QUALITY. LEADING TECHNOLOGY. OUTSTANDING SERVICE.
Graco Supply Systems Sealant and Adhesive Supply Systems with NXT Technology PROVEN QUALITY. LEADING TECHNOLOGY. OUTSTANDING SERVICE. Graco Supply Systems with NXT Technology Discover the next generation
More information3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A Ultra Max II and Ultimate Mx II 695 and 795
Repair Displacement Pump 310643H 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model 248204, Series A Ultra Max II and Ultimate Mx II 695 and 795 Model 248205, Series A Ultra Max II and Ultimate
More informationDisplacement Pump INSTRUCTIONS-PARTS LIST psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A. Model , Series A
INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. B Displacement Pump 3600 psi (250
More information24G621 Agitator Speed Controller Accessory
Instructions-Parts 24G62 Agitator Speed Controller Accessory 3A35A ENG Accessory kit to control and automatically maintain the speed of an air-powered agitator. For professional use only. Important Safety
More informationRepair. Clutch Replacement Kit C. GMax and LineLazer Airless Paint Sprayers WARNING. Pressure Relief Procedure
Repair Clutch Replacement Kit 309890C EN IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions in this manual. Save these instructions. GMax and LineLazer Airless Paint Sprayers Pressure Relief
More informationHigh volume lowers for protective coatings. For professional use only. See page 3 for model information, see page 33 for maximum working pressure.
Instructions - Parts List Xtreme Lowers 3762S EN High volume lowers for protective coatings. For professional use only. See page 3 for model information, see page 33 for maximum working pressure. Important
More informationUltimate Mx II. Parts List E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac Model Type Lo-Boy Hi-Boy. Sherwin Williams 120V
Parts List Ultimate Mx II 3437E 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Type Lo-Boy Hi-Boy Sherwin Williams 20V Sherwin Williams 20V 695 Standard 826068 826067 Premium 826070 826069
More informationDisplacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A
INSTRUCTIONS-PARTS LIST 308798 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. U Displacement Pump 3600 psi (250
More informationFast-Flo Pump INSTRUCTIONS-PARTS LIST. Table of Contents 1:1 RATIO
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 07 7 Rev. Z Supersedes W Includes Rev. Y changes
More information3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Model , Series A
Repair isplacement Pump 310894H - For portable spray application of architectural paints and coatings or replacement pump for Graco GMaxt II sprayers - 3300 psi ( bar, 22.8 MPa) Maximum Working Pressure
More informationDisplacement Pump. Instructions - Parts List ZAE
Instructions - Parts List Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Displacement Pump 309277ZAE EN 3600 psi (250 bar, 24.8 MPa) Maximum Working
More informationCarbon Steel 1000cc Lower
Instructions - Parts List Carbon Steel 000cc Lower 377E ENG Designed for low to medium pressure, medium volume circulation of finishing materials. For professional use only. Not approved to European explosive
More informationDisplacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A
INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. M Displacement Pump 3600 psi (250
More informationSaniForce Air Motors. Instructions/Parts 3A1211N
Instructions/Parts SaniForce Air Motors 3A2N EN For use on SaniForce piston pumps, which are used to transfer medium to high viscosity fluids in applications requiring high sanitation. For professional
More informationMerkur Pump. Instructions/Parts List G. Part No Shown II 2 G
Instructions/Parts List Merkur Pump 30946G Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 3 for model information. Part No. 3380 Shown
More informationUltra Max II Ultimate Mx II
Parts Ultra Max II Ultimate Mx II 3362S EN - For application of architectural paints and coatings This manual covers every series - Korean patent 0-057968 3300 psi (228 bar, 228 MPa) Maximum Working Pressure
More informationMotor Mounting Kits. Instructions J EN. 16C487 Motor Coupler Kit includes 2.25 in. (57.2 mm) key For NEMA 182/184 TC Frame ATEX Electric Motors
Instructions Motor Mounting Kits 31160J EN To install electric motors on E-Flo 4-Ball Piston Pumps. For professional use only. (Kits do not include motors.) 16C487 Motor Coupler Kit includes 2.2 in. (7.2
More informationStainless Steel 1000cc Lower
Instructions - Parts List Stainless Steel 1000cc Lower 311716C ENG Designed for low to medium pressure, medium volume circulation of finishing materials. For professional use only. Not approved to European
More informationMerkur. High Performance Fine Finish Packages
High Performance Fine Finish Packages Advanced Technology. Superior Performance. The new and improved packages are designed to outperform and outlast other pumps in their class. With more models and configurations
More informationGM 3000 AIRLESS PAINT SPRAYERS Drive Housing Replacement Kit Pinion Housing Replacement Kit
INSTRUCTIONS 08660 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. B GM 000 AIRLESS PAINT SPRAYERS Drive Housing Replacement Kit 869 Pinion Housing
More informationUltra Platinum Sprayers
Parts Ultra Platinum Sprayers 313565F EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations.
More informationInstructions D. Important Safety Instructions For detailed sprayer information and warnings, see Operation manual. Pressure Relief Procedure
Instructions Inlet/Outlet Valve Repair Kit for Project Painter 5, Project Painter 7, X5, X7, LTS 15, LTS 17, Project Painter Plus, M3+, M5+, L10+, Pro Plus 20, Pro Plus 30, and Pro Plus 45 irless Sprayers
More informationDisplacement Pump. Instructions C EN. Model psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate
Instructions Displacement Pump 308486C EN For use with petroleum-based lubricants only. For professional use only. Model 237527 540 psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate Important
More informationInstructions Parts List
Instructions Parts List : RATIO Fast Flo Pump Air operated piston transfer pump for low viscosity fluids. For professional use only. Only models that are EX certified are approved for use in European explosive
More information4:1 Fusion Static Mixer Kit
Instructions-Parts 4:1 Fusion Static Mixer Kit 1294A For use with 4:1 ratio material and Graco Fusion MP gun only. Not for use in explosive atmospheres. 500 psi (24.5 MPa, 245 bar) Maximum Fluid Working
More informationModel Reverse (up cut) / inlay and grooving (Must be used with LineDriver ) GrindLazer 480 (480 cc / 16 hp)
Parts GrindLazer 3A003E Patent Pending EN - Designed to grind flat, horizontal concrete or asphalt surfaces - For removal of materials from concrete and asphalt surfaces - Professional outdoor use only
More informationProcess Equipment. Pumping Solutions for Process Industries
Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded
More informationHigh volume lowers for protective coatings. For professional use only. See page 3 for model information, see page 29 for maximum working pressure.
Instructions - Parts List Xtreme Lowers 3762M EN High volume lowers for protective coatings. For professional use only. See page 3 for model information, see page 29 for maximum working pressure. Important
More informationMark V Premium and Mark V Max Electric Airless Sprayers
Parts Mark V Premium and Mark V Max Electric Airless Sprayers 3A2245B EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European
More informationSplit Manifold Kits. Installation - Parts List D. Converts Huskyt 307 Diaphragm Pump to dual fluid inlet or outlet
Installation - Parts List Split Manifold Kits 0849D Converts Huskyt 07 Diaphragm Pump to dual fluid inlet or outlet Part No. 2720 For Husky 07 Polypropylene Pumps Part No. 272 For Husky 07 cetal Pumps
More informationASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.
Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco Husky 3300 Parts 3300A, Aluminum 3 3 5 1a see page 3 1 1 13 1b see page 30 1b 1a 11 1 13 1c 1 1d 3 1 1 15 0 see page 35 3 5 1 Not used on some models. ti1a 3A011H For
More information4-Ball Lowers 1500cc and 2000cc Models
Instructions - Parts List -Ball Lowers 500cc and 2000cc Models 3A2023A EN Designed for low pressure oil transfer. Do not use for flushing or purging lines with caustics, acids, abrasive line strippers,
More informationAir Actuated Dispense Valve
Instructions-Parts Air Actuated Dispense Valve 312782D EN To dispense plural component fluids and solvents. For professional use only. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 207
More informationINSTRUCTIONS. US Patent Pending HVLP Turbine Guns
INSTRUCTIONS 309317 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. A US Patent Pending HVLP Turbine Guns 10 psi (0.07 MPa,.7 bar) Maximum Inlet
More informationDisplacement Pump. FOR USE WITH REACTOR ELECTRIC PROPORTIONERS 3500 psi (24.5 MPa, 245 bar) Maximum Working Pressure
Repair - Parts Displacement Pump 309577G FOR USE WITH REACTOR ELECTRIC PROPORTIONERS 3500 psi (4.5 MPa, 45 bar) Maximum Working Pressure Component A (ISO) Pumps with wet-cup flush feature Part No. 46830,
More informationThermoLazer Pavement Marking System A
ThermoLazer Pavement Marking System 313880A - For professional application of thermoplastic traffic marking compound materials (reflective beads applied simultaneously with screeding) - - For outdoor use
More informationProcess Equipment. Pumping Solutions for Process Industries
Process Equipment Pumping Solutions for Process Industries Ordering Husky Air-Operated Information Double Diaphragm Pumps Husky Pumping Technology Our Husky air-operated double diaphragm pumps are loaded
More informationParts D EN. 695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark X Electric Airless Sprayers
Parts 9 / 9 / 09 / 9 / Mark IV / Mark V / Mark X Electric Airless Sprayers 9D EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European
More informationOld Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2
Instructions - Parts Old Seal Kits 32348B To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions
More informationDisplacement Pump. Repair-Parts. Contents B EN. Part No psi (22.7 MPa, 227 bar) Maximum Working Pressure
Repair-Parts Displacement Pump 313123B EN For use with polyurethane foam, polyurea, and similar non-flammable material. Not for use in explosive atmospheres. Part No. 2577 3300 psi (22.7 MPa, 227 bar)
More informationDisplacement Pump. Repair-Parts. Contents D ENG. Part No psi (13.8 MPa, 138 bar) Maximum Working Pressure
Repair-Parts Displacement Pump 313383D ENG For use with polyurethane foam, polyurea, and similar non-flammable material. For professional use only. Not for use in explosive atmospheres. Part No. 257344
More informationPlus Mark V Mark V Plus
Parts List Ultra Max II 3363K ENG 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Lo-Boy Hi-Boy 240 Europe 240 Europe Multi-cord 240 Asia 695 25534 249663 795 249666 25349 795 Plus 25665
More informationFour-Check Piston Pumps
Four-Check Piston Pumps Concept and Theory Training Table of Contents Introduction... 1 Module Purpose... 1 Primary Audience... 1 Benefits to You...1 Objectives...1 How Do I Use This Module?...1 What Materials
More informationIntegrated and 2-Button Interlock Air Controls for use with Supply Systems.
Instructions-Parts Air Controls 312374A Integrated and 2-Button Interlock Air Controls for use with Supply Systems. Important Safety Instructions Read all warnings and instructions in this manual. Save
More informationModel For petroleum products and other fluids compatible with aluminum and buna-n seals.
Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids
More informationPressurized oil drain for collection of used lubricants and anti-freeze.
Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure
More informationPumping Solutions High Performance Industrial Circulation and Feed Pumps
Pumping Solutions High Performance Industrial Circulation and Feed Pumps PROVEN QUALITY. LEADING TECHNOLOGY. Setting the Standard! When you use a Graco pump, you re looking forward to years of reliable
More informationMerkur Bellows Displacement Pump
Repair/Parts Merkur Bellows Displacement Pump 79H EN For pumping isocyanates, UV coatings, and other moisture-sensitive materials. For professional use only. See page 6 for model information, including
More informationSingle Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System
Instructions Single Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System 308613H EN - For the application of road marking paints and coatings - - For professional use only
More informationVertical Hydraulic Driver
Repair-Parts Vertical Hydraulic Driver 3A001C EN For use with a vertically mounted proportioning pump. For professional use only. D30 - Vertical Hydraulic Driver 100 psi (8. MPa, 8.7 bar) Maximum Working
More informationMotor/Drive Housing and Motor Fan Replacement Kits
Instructions Motor/Drive Housing and Motor Fan Replacement Kits 311301C Use with MAGNUM XR, SR7, ProX and ProLTS Model Sprayers XR Motor/Drive Housing Replacement Kit: 287773 SR7 Motor/Drive Housing Replacement
More informationInstructions Parts List
Instructions Parts List DOUBLE ACTING Falcon and Falcon II Air Motors 08995E Part No. 41504, Series C Falcon Air Motor 150 psi (1.0 MPa, 10 bar) Maximum Air Input Pressure Part No. 41505, Series C Falcon
More informationINSTRUCTIONS-PARTS LIST
INSTRUCTIONS-PARTS LIST 308349 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. D CARBON STEEL Dura-Flo 600 Pumps
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box
More information3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Model , Series A
Repair isplacement Pump 310643S EN 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Model 248204, Series A Ultrar Max II and Ultimate Mx II 695 and 795 ASM Zip--Sprayt 2700 Plus, 3100 Plus ASM AllPro
More informationFine Finish Hand-Held Paint Sprayer 3A1698F. Operation
Operation Fine Finish Hand-Held Paint Sprayer - For portable spray applications of architectural paints and coatings only - - Not approved for use in explosive atmosphere locations - - Service only at
More informationE-Flo TM. Dual Control Electric Circulating Pumps PROVEN QUALITY. LEADING TECHNOLOGY.
E-Flo TM DC Dual Control Electric Circulating Pumps PROVEN QUALITY. LEADING TECHNOLOGY. Boost Your Bottom Line with Energy Savings and Advanced Pump Control Advanced Motor with Control Module Efficient
More informationAir Actuated Dispense Valve
Instructions-Parts Air Actuated Dispense Valve 312782B To dispense plural component fluids and solvents. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 210 bar) Maximum Fluid Working Pressure
More informationTwo-Check & Priming Piston Pumps
Two-Check & Priming Piston Pumps Concept and Theory Training Table of Contents Introduction... 1 Overview... 1 How to use this Module... 1 Learning Objectives... 2 Text... 2 Charts, Illustrations... 2
More informationInstructions-Parts. Dosing Pumps J EN. System. See page 2 for model part numbers and information.
Instructions-Parts Dosing Pumps 332339J EN To pressurize and proportion fluid in a ProMix PD2K Electronic Positive Displacement Proportioning System. For professional use only. Important Safety Instructions
More informationINSTRUCTIONS-PARTS LIST. Kit, Swivel Wheel. Line Lazer 3500, Model , Series A. Old Caster Wheel Removal. Rev. D
INSTRUCTIONS-PRTS LIST This manual contains important warnings and information. RED ND KEEP FOR REFERENCE. 308943 Rev. D INSTRUCTIONS Kit, Swivel Wheel Line Lazer 3500, 5000 Model 241105, Series Old Caster
More information