PARTS MANUAL SECTION R1, 2215RR1-540 RPM 12215R1, 12215RR1-1000RPM FLEX WING ROTARY CUTTER. Published 07/16

Transcription

1 225R, 225RR - 50 RPM 225R, 225RR - 000RPM FLEX WING ROTARY CUTTER Published 07/6 PARTS MANUAL SECTION 3 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment. Important Operating and Safety Instructions are found in the Mower Safety Video that can be instantly accessed on the internet at:

2 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. For maximum safety and to guarantee optimum product reliability, always use genuine BUSH HOG Parts. The use of inferior replacement parts may causepremature or catastrophic failure which could result in serious injury or death.direct any questions regarding parts to: BUSH HOG 250 Griffin Ave. Selma, AL Contact Us Alamo Group Inc.

3

4 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one () year for non-commercial, state and municipalities use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hog dealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Bush Hog s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or use of the items warranted. Such incidental and consequential damages shall include but not be limited to: transportation charges other than normal freight charges; cost of installation other than cost approved by Bush Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts beyond the control of Bush Hog. THIS LIMITED WARRANTY SHALL NOT APPLY:. To vendor items which carry their own warranties, such as engines, tires, and tubes. 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement of Bush Hog such use affects its performance, stability or reliability.. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the sole judgement of Bush Hog, affects its performance, stability or reliability. 5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn blades, or to normal deterioration of such things as belts and exterior finish due to use or exposure. 6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the company s sole judgement is a wear item. NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY BUSH HOG S SERVICE MANAGER, 250 GRIFFIN AVE., SELMA, ALABAMA Record the model number, serial number and date purchased. This information will be helpful to your dealer if parts or service are required. MODEL NUMBER SERIAL NUMBER DATE OF RETAIL SALE MAKE CERTAIN THE WARRANTY HAS BEEN FILED WITH BUSH HOG SELMA, ALABAMA

5 BUSH HOG/ LAND MAINTENANCE REPAIR PARTS MANUAL July, R, 225RR - 50 RPM 225R, 225RR - 000RPM ALPHABETICAL INDEX CONTENTS PAGE Axle, Center Deck Axles, Wing Decks Axles & Related Parts, Single & Dual Arms & Related Parts, Tandem Baffle Kit Blades & Blade Holders...See Deck Assemblies Chain, Safety Tow Chains, Discharge Safety - Single Chain Chains, Discharge Safety - Double Row Cylinders, Hydraulic Decal Kits - Safety Deck Assembly, Center , 3--3 Deck Assembly, RH & LH Wing...3--, 3--5 Driveline Holder Assembly Driveshaft, Wing - Comer / EG Driveshaft, Center Coupler - Comer / EG Driveshaft, Input CV 50 RPM - Comer / EG Driveshaft, Input CV 000 RPM -3/8 2 Spline- Comer / EG Driveshaft, Input CV 000 RPM -3/ 20 Spline- Comer / EG Gearbox, Transfer (50 RPM Input) (Mfg. by Comer) Gearbox, Transfer (000 RPM Input) (Mfg. by Comer) Gearbox, Center and L.H. Wing 50 RPM Gearbox, R.H. Wing 50 RPM Gearbox, Center 000 RPM Gearbox, L. H. Wing 000 RPM Gearbox, R.H. Wing 000 RPM Hitch Assembly, Swivel Pivot Clevis Hydraulic Fittings To Tractor Remotes Jackstand LED Light Kit (Rear Lights Only) Leveling Rod Assembly Shield, Wing Driveshafts Shield Assembly, Center SMV Sign & Related Parts Tire, Airplane &3-6-7 Tire, Solid Tongue Assembly Turnbuckle Assembly, Axle Adjust

6

7 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 DECAL KIT 2! w 2) o 2! r e! r u yt e ) ^ o i *( & u ^ q e r! # $ % 2@ 2@ $ % e % e % e Tube, Manual Storage Decal, Made in USA Decal Kit 3 D6 Decal, Danger (Thrown Objects) 6 D56 Decal, Danger 5 D587 Decal, Lubricant 6 D59 Decal, Operation 7 D555 Decal, Danger 2 8 D83 Decal, Danger (Multilingual) 9 93 Decal, Important 2 0 D559 Decal, Genuine Bush Hog Parts D55 Decal, Blade Rotation CCW 2 2 D552 Decal, Blade Rotation CW Decal, Bush Hog Logo Reflector, Red 2 x Reflector, Amber 2 x D565 Decal, Danger 2 7 D553 Decal, Warning 8 D57 Decal, Danger / Warning (50 RPM) 9 D58 Decal, Warning Over Lay (000 RPM) Important Decal Model Decal, Model Decal, Decal, Bush Hog Logo 2 3--

8 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER DECK ASSEMBLY )! $ o # 2! 2* 3@ 2& 3) 3! 3) 3@ 2& 2( 3! 3) i y 2# 2@ 2& # $ u u )! ert w ert w 2) ( ^ & % ^ 2^ 2% 2$ * 3--2

9 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER DECK ASSEMBLY Center Deck w/decals Center Deck w/rings & Decals Skid Capscrew, 3/8 x -/ Gr BH Flatwasher, 3/ Locknut, 3/ Transfer Gearbox (50 RPM) Transfer Gearbox (000 RPM) Capscrew, 5/8 x 2 Gr Locknut, 5/8 Flanged BH Gearbox Assy, (50 RPM) BH Gearbox Assy, (000 RPM) Pin, Wing Latch Presto Pin 9 Ga x 3 D Pltd 2 2 9BH Capscrew, / x -/ Gr Locknut, / Hinge Rod Weldment Weldment, Pan Blade, Parallel Uplift CCW, Blade Bolt Kit BH Blade Bolt Lockwasher, -/ BH Jamb Nut, -/ Sight Window, Gearbox 85MM 22 50BH Capscrew, 3/ x 2-/2 Gr Locknut, 3/ Gr G Flng Castle Nut, M BH Cotter Pin, M6 x BH Spring Washer 36mm Bushing Capscrew 7/8 x 5 Gr BH Capscrew 7/8 x 5.5 Gr Lockwasher, 7/ Hex Nut, 7/ BH Grease Fitting

10 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING DECK ASSEMBLIES This Parts Illustration applies to RH and LH Wings. RH WING SHOWN ) u i w # $ % # 3! 2( 3$ # 3@ 3# 2^2& 2% 2^2& 3$ 3# 3@ 2* 3) er ty o 2! 2) ^ ( & * & 3-- 2$ 2# 2@

11 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 RH & LH WING DECK ASSEMBLIES This Parts Listing applies to RH and LH Wings R.H. Wing Frame w/decals R.H. Wing Frame w/rings & Decals L.H. Wing Frame w/decals L.H. Wing Frame w/rings & Decals Skid R.H Skid L.H Plow Bolt, 3/8 x -/ 595BH Flatwasher, 3/ Lockwasher, 3/ Hex Nut, 3/ BH Gearbox Assy, R.H., (50 RPM) BH Gearbox Assy, L.H., (50 RPM) BH Gearbox Assy, R.H., (000 RPM) BH Gearbox Assy, L.H., (000 RPM) Locknut, 3/ Flanged BH Capscrew, 3/ x 2-/2 Gr Sight Window, Gearbox Cylinder Pin BH Flatwasher, Roll Pin, / x -3/ Latch Flatwasher, 3/ Pan, Blade Blade, Uplift CCW R.H. Wing Blade, Uplift CW L.H. Wing Blade Bolt Kit BH Blade Bolt Lockwasher, -/ BH Jamb Nut, -/ BH Cotter Pin M6 x Castle Nut, M (Blade Pan) BH Spring Washer 36mm Guard, Wing Discharge 26 09BH Carriage Bolt 3/8 x Gr Locknut 3/8 Flanged Bushing, Axle Pivot Bushing, Axle Pivot Capscrew 7/8 x 5 Gr Capscrew 7/8 x 6-3/ Gr Lockwasher 7/ Hex Nut 7/ BH Grease Fitting

12 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 SMV SIGN & RELATED PARTS SMV Mount Angle Weldment SMV Spade Bracket SMV Sign 5093 Capscrew, /2 x -/2 Gr Locknut, / Capscrew, / x 3/ Gr Locknut, / Gr C

13 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL LED LIGHT KIT (REAR LIGHTS ONLY) 3 July, LEFT SIDE RIGHT SIDE 5 WIRING HARNESSES Light Kit Module, Enhance Main Harness (7 Pin, 6 Long) Wishbone Harness, LH (8 Long) Wishbone Harness, RH (8 Long) Dual LED Ag Lamp, Left Side, Amber/Red Dual LED Ag Lamp, Right Side, Red/Amber Lens, Red Replacement Lens, Amber Replacement Cover, Black Replacement Lens Slt Pn Hd Mach Screw, #0 x Flatwasher, # BH Locknut, # BH Capscrew, / x Gr BH Flatwasher, / Locknut, / Gr. C Clamp

14 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR SINGLE ROW HIGHWAY CHAINS t ^&*( t ^&*(!# $% ) $% )!#$% 3-2-2

15 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR SINGLE ROW HIGHWAY CHAINS Chain Assy, Center Front Support, Front Center Chain Rod, Chain Chain, Plated - 5 Link Chain Assy, Center Front Side Support, Front Outside Chain Rod, Chain Chain, Plated - 5 Link Chain Assy, Front Wing Chain Support, Front Rod, Chain Chain, Plated - 5 Link Chain Assy, Center Rear Support, Rear Chain Rod, Chain - Rear Center Deck Chain, Plated - 5 Link Chain, Plated - Link Chain Assy, Rear Axle Support, Rear Chain Axle Rod, Chain-Wing Axle Chain, Plated - 6 Link Chain Bracket Assy, LH - Outer Wing Bracket, Outer Chain - LH Chain, Plated - Link Cable, Chain Sleeve, Stop Chain Bracket Assy, RH - Outer Wing Bracket, Outer Chain - RH Chain, Plated - Link Cable, Chain Sleeve, Stop Chain Bracket Assy, RH - Inner Wing Bracket, Inner Chain - RH Chain, Plated - 5 Link Chain, Plated - Link Cable, Chain Sleeve, Stop Chain Bracket Assy, LH - Inner Wing Bracket, Inner Chain - LH Chain, Plated - 5 Link Chain, Plated - Link Cable, Chain Sleeve, Stop Chain, Plated - 5 Link Capscrew, /2 x -/2 Gr Carriage Bolt, /2 x -/ Lockwaser, / Flatwasher, / Hex Nut, / BH Carriage Bolt, 3/8 x Lockwasher, 3/ BH Flatwasher, 3/ Hex Nut, 3/

16 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR DOUBLE ROW HIGHWAY CHAINS t ^&*( t ^&*(!# $% ) $% )!#$% 3-2-

17 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL FRONT AND REAR DOUBLE ROW HIGHWAY CHAINS July, Chain Assy, Center Front Support, Front Center Chain Rod, Chain Chain, Plated - 9 Link Chain Assy, Center Front Side Support, Front Outside Chain Rod, Chain Chain, Plated - 9 Link Chain Assy, Front Wing Chain Support, Front Rod, Chain Chain, Plated - 9 Link Chain Assy, Center Rear Support, Rear Chain Rod, Chain - Rear Center Deck Chain, Plated - 9 Link Chain, Plated - 7Link Chain Assy, Rear Axle Support, Rear Chain Axle Rod, Chain-Wing Axle Chain, Plated - Link Chain Bracket Assy, LH - Outer Wing Bracket, Outer Chain - LH Chain, Plated - 7 Link Cable, Chain Sleeve, Stop Chain Bracket Assy, RH - Outer Wing Bracket, Outer Chain - RH Chain, Plated - 7 Link Cable, Chain Sleeve, Stop Chain Bracket Assy, RH - Inner Wing Bracket, Inner Chain - RH Chain, Plated - 9 Link Chain, Plated - 7 Link Cable, Chain Sleeve, Stop Chain Bracket Assy, LH - Inner Wing Bracket, Inner Chain - LH Chain, Plated - 9 Link Chain, Plated - 7 Link Cable, Chain Sleeve, Stop Chain, Plated - 5 Link Capscrew, /2 x -/2 Gr Carriage Bolt, /2 x -/ Lockwaser, / Flatwasher, / Hex Nut, / BH Carriage Bolt, 3/8 x Lockwasher, 3/ BH Flatwasher, 3/ Hex Nut, 3/

18 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL CENTER SHIELD ASSEMBLY y t &* $ r July, 206 u # ( ^ e q )! 2! o 2@ 2! 2) 2%2^% ) 2# 2$ 2) w i Mount, Shield Support Wldmt, Rear Shield Center Shield w/decals Decal, Warranty 5 93 Decal, Important Decal, Important Decal, Model Decal, Model Input Shield, Top Center Shield Bott. w/decal 0 D56 Decal, Danger (Guard Missing) Center Shield Bott. Frt. w/decal Lynch Pin U-Bolt, Foot Platform Tube, Owner s Manual 5 26 Flatwasher, M Flag Decal Capscrew, 5/6 x 3/ Gr Locknut, 5/6 Gr C Hex Nut, 3/ Locknut, 3/8 Gr C Capscrew, /2 x -/2 Gr Locknut, / Capscrew, 3/8 x Gr Flatwasher, 3/8 SAE BH Capscrew, M8 x.25 x 20 Gr BH Lockwasher M8 8

19 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING DRIVELINE SHIELDING 2 3,, Input Shield Windows Capscrew, M8 x.25 x 5 G 8.8 3BH Lockwasher, M Flatwasher, M

20

21 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, TRANSFER GEARBOX ASSEMBLY RPM MFG. BY COMER , Assembly, Transfer Gearbox Bearing Casing Oil Seal 7088 Snap Ring Shim Gear Kit ( - 2T & 2-20T Gears) Shaft, -3/ Z Vent Plug Shaft, -3/ Z Cover 89BH Capscrew M0 x.5 x 35 Gr Gas Plug, 3/ Shim Shim Shim

22 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, TRANSFER GEARBOX ASSEMBLY RPM mfg. by comer , NO. NO. DESCRIPTION QTY Assembly, Transfer Gearbox Bearing Casing Oil Seal 7088 Snap Ring Shim Gear, Set (000 RPM) Shaft -3/ Z Gear, Set (000 RPM) Shaft, -3/ Z Cover 89BH Capscrew M0 x.5 x 35 Gr Gas Plug 3/ Shim Shim Shim Vent Plug 3-3-2

23 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL L.H. WING GEARBOX FOR July, BH Gearbox Assembly BH Housing BH Cap, Top BH Shaft, Input -3/ -20spl BH Shaft, Output BH Gear, 22 tooth BH Gear, 6 tooth Bearing, Roller 5x85x20.75mm Bearing, Tapered Roller 90x 50x 2.75mm BH Bearing, Tapered Roller BH Snap Ring Din 72 85x88.5x3mm BH Shim Kit, Input Seal, Oil 5x85x0mm Cap, Oil 85x0mm BH Dipstick,Oil BH Washer, Sealing M BH Plug, Vent M BH Shim Kit BH Shim 5.3x65.3x2.5mm Snap Ring External 50x7x BH Nut, Slotted Flanged M BH Seal, Oil 70x0x Snap Ring, Internal 0mm BH Shield, Protective Cotter Pin M5x BH Plug, Socket Hd BH Wassher, Spring 36mm Nut, Castle M36x BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM BH Bolt, Socket Hd. M8-.25x

24 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL L.H. WING DECK & CENTER DECK GEARBOX FOR July, BH Gearbox Assembly BH Housing BH Cap, Top BH Shaft, Input -3/ -20spl BH Shaft, Output BH Gear, 2 tooth BH Gear, 5 tooth Bearing, Roller 5x85x20.75mm Bearing, Tapered Roller 90x 50x 2.75mm BH Bearing, Tapered Roller BH Snap Ring Din 72 85x88.5x3mm BH Shim Kit, Input Seal, Oil 5x85x0mm Cap, Oil 85x0mm BH Dipstick,Oil BH Washer, Sealing M BH Plug, Vent M BH Shim Kit BH Shim 5.3x65.3x2.5mm Snap Ring External 50x7x BH Nut, Slotted Flanged M BH Seal, Oil 70x0x Snap Ring, Internal 0mm BH Shield, Protective Cotter Pin M5x BH Plug, Socket Hd BH Wassher, Spring 36mm Nut, Castle M36x BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM BH Bolt, Socket Hd. M8-.25x

25 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL CENTER DECK GEARBOX FOR July, BH Gearbox Assembly BH Housing BH Cap, Top BH Shaft, Input -3/ -20spl BH Shaft, Output BH Gear, 23 tooth BH Gear, 20 tooth Bearing, Roller 5x85x20.75mm Bearing, Tapered Roller 90x 50x 2.75mm BH Bearing, Tapered Roller BH Snap Ring Din 72 85x88.5x3mm BH Shim Kit, Input Seal, Oil 5x85x0mm Cap, Oil 85x0mm BH Dipstick,Oil BH Washer, Sealing M BH Plug, Vent M BH Shim Kit BH Shim 5.3x65.3x2.5mm Snap Ring External 50x7x BH Nut, Slotted Flanged M BH Seal, Oil 70x0x Snap Ring, Internal 0mm BH Shield, Protective Cotter Pin M5x BH Plug, Socket Hd BH Wassher, Spring 36mm Nut, Castle M36x BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM BH Bolt, Socket Hd. M8-.25x

26 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL RH WING DECK GEARBOX FOR July, BH Gearbox Assembly BH Housing BH Cap, Top BH Shaft, Input -3/ -20spl BH Shaft, Output BH Gear, 2 tooth BH Gear, 5 tooth Bearing, Roller 5x85x20.75mm Bearing, Tapered Roller 90x 50x 2.75mm BH Bearing, Tapered Roller BH Snap Ring Din 72 85x88.5x3mm BH Shim Kit, Input Seal, Oil 5x85x0mm Cap, Oil 85x0mm BH Dipstick,Oil BH Washer, Sealing M BH Plug, Vent M BH Shim Kit BH Shim 5.3x65.3x2.5mm Snap Ring External 50x7x BH Nut, Slotted Flanged M BH Seal, Oil 70x0x Snap Ring, Internal 0mm BH Shield, Protective Cotter Pin M5x BH Plug, Socket Hd BH Wassher, Spring 36mm Nut, Castle M36x BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM BH Bolt, Socket Hd. M8-.25x

27 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL RH WING DECK GEARBOX FOR July, BH Gearbox Assembly BH Housing BH Cap, Top BH Shaft, Input -3/ -20spl BH Shaft, Output BH Gear, 22 tooth BH Gear, 6 tooth Bearing, Roller 5x85x20.75mm Bearing, Tapered Roller 90x 50x 2.75mm BH Bearing, Tapered Roller BH Snap Ring Din 72 85x88.5x3mm BH Shim Kit, Input Seal, Oil 5x85x0mm Cap, Oil 85x0mm BH Dipstick,Oil BH Washer, Sealing M BH Plug, Vent M BH Shim Kit BH Shim 5.3x65.3x2.5mm Snap Ring External 50x7x BH Nut, Slotted Flanged M BH Seal, Oil 70x0x Snap Ring, Internal 0mm BH Shield, Protective Cotter Pin M5x BH Plug, Socket Hd BH Wassher, Spring 36mm Nut, Castle M36x BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM BH Bolt, Socket Hd. M8-.25x

28

29 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, WING DRIVESHAFT -3/ - 20 Spline Manufactured by Comer/EG ASAE SIZE Assembly, Driveline w/clutch 7622 Complete Yoke Cross Journal Set Circlip Grease Nipple Outer Yoke Roll Pin For Outer Tube Bushing w/grease Fitting Complete Outer Tube Inner Tube Roll Pin For Inner Tube Inner Yoke Complete Disc Clutch Guard Ret. Collar (Outer Tube) Bolt Guard Ret. Collar (Inner Tube) Complete Guard w/inst. Manual Yoke Tapered Pin Set, -3/ Spring Flanged Yoke Bushing Lining Ring Clutch Support Inner Plate Pressure Plate 27 55BH Capscrew, M0 x.5 x Decal, Danger - Outer Tube Decal, Danger - Outer Guard Tube 30 5BH Locknut, M0 x.5 8

30 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, CENTER DRIVESHAFT -3/ 20 Spline Manufactured by Comer / EG u q e w r * t * e w & i ^ o )! $ % y Assembly, Driveline w/clutch Yoke w/grease Nipple Cross Journal Set Grease Nipple Capscrew, M2 x.25 x 80 Gr. 2.9 w/locknut M Retaining Washer Complete Disc Clutch Grease Nipple Spring Flanged Yoke Bushing Lining Ring Tapered Pin Set -3/ Clutch Support Inner Plate Pressure Plate 6 55BH Capscrew, M0 x.5 x BH Locknut, M0 x Flanged Yoke, Male Flanged Yoke, Female 3--2

31 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, SP C.V. Driveshaft Input : -3/8 6 Spline, ASAE Size 5 Manufactured by Comer / EG SP Driveshaft Assembly Cross Journal Set Circlip Grease Nipple Wide Angle Double Yoke Outer Yoke Roll Pin - Outer & Inner Tube Wiper Complete Outer Tube Inner Tube Roll Pin For Inner Tube Inner Yoke Cross Journal Set 76239BH Complete Yoke Guard Cone Screw Kit Bearing Ring Guard Ret. Collar - Outer Tube Bolt Guard Ret. Collar - Inner Tube Guard Cone Set Complete Guard w/inst. Manual Outer Circlip Sliding Sleeve Collar Spring Fixed Sleeve Ball, / Yoke (See Item ) Tapered Pin Set -3/ Yoke Assy. -3/8-6 Spline Male Tube w/yoke Half Female Guarding w/label Half Male Guarding (See Item 23) Female Shaft (See Item ) Half Male Shaft w/guarding Decal, Danger - Outer Tube Decal, Danger - Outer Guard Tube Plastic Cap - Outer Tube Plastic Cap - Inner Tube Kit Collar For Yoke -3/8 3--3

32 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL SP C.V. Driveshaft Input : -3/8 2 Spline, ASAE Size 5 Manufactured by Comer / EG July, SP Driveshaft Assembly Cross Journal Set Circlip (See Item 2) Grease Nipple Wide Angle Double Yoke Outer Yoke Roll Pin - Outer & Inner Tube Wiper Complete Outer Tube Inner Tube Inner Yoke Cross Journal Set Circlip (See Item 2) 7622 Complete Yoke Guard Cone (See item 22) Screw Kit Bearing Ring Guard Ret. Collar - Outer Tube Bolt Guard Ret. Collar - Inner Tube Guard Cone Set Complete Guard w/inst. Manual Outer Circlip (See Item 3 or ) Sliding Sleeve Collar (See Item 3 or ) Spring (See Item 3 or ) Fixed Sleeve (See Item 3 or ) Ball, /2 (See Item 3 or ) Yoke (See Item ) Tapered Pin Set -3/ Yoke Assy -3/8-2 Spline Male Tube w/yoke (See Item 36) Half Female Guarding (See Item 23) Half Male Guarding (See Item 23) Female Shaft (See Item ) Half Male Shaft w/guarding Decal, Danger - Outer Tube Decal, Danger - Outer Guard Tube Plastic Cap - Outer Tube Plastic Cap - Inner Tube Kit Collar For Yoke -3/8 3--

33 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, SP C.V. Driveshaft Input : -3/ 20 Spline, ASAE Size 5 Manufactured by Comer / EG SP Assembly, Driveline Complete Yoke Cross Journal Set Circlip Grease Nipple Wide Angle Double Yoke Outer Yoke Roll Pin - Outer & Inner Tube Wiper Complete Outer Tube Inner Tube Roll Pin For Inner Tube Inner Yoke Cross Journal Set 76239BH Complete Yoke Guard Cone Screw Kit Bearing Ring Guard Ret. Collar - Outer Tube Bolt Guard Ret. Collar - Inner Tube Guard Cone Set Complete Guard w/inst. Manual Outer Circlip Sliding Sleeve Collar Spring Fixed Sleeve Ball, / Yoke Tapered Pin Set -3/ Female Tube w/yoke Male Tube w/yoke Half Female Guarding w/label Half Male Guarding Half Female Shaft w/guarding Half Male Shaft w/guarding Decal, Danger - Outer Tube Decal, Danger - Outer Guard Tube Plastic Cap - Outer Tube Plastic Cap - Inner Tube Kit Collar For Yoke -3/ 3--5

34

35 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TONGUE, LEVELING ROD & RELATED PARTS Weldment, Tongue Pivot Bushing, Tongue Capscrew, x 5 Gr Locknut, Gr. C Levelving Rod Assy Clevis Assy, RH Clevis Assy, LH Leveling Rod Jam Nut Pin, Swivel Link Flatwasher, SAE Cotter Pin, 3/6 x -/2 3 9BH Grease Fitting 2 2D2528 Jackstand Assy 5 D767 Decal, Warning - Jack Cap Rod, Hose Holder 7 200BH Capscrew, /2 x 2 Gr Flatwasher, / Locknut, / Safety Tow Chain 3-5-

36 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, DRIVELINE HOLDER ASSEMBLY Mounting Bracket Weld Formed Driveline Holder Tie-Down Strap Capscrew, 5/8 x Flatwasher, 5/8 SAE Lockwasher, 5/ Hex Nut, 5/8 2 SWIVEL PIVOT HITCH REF. NO. PART NO. QTY. DESCRIPTION Hitch w/decals Shaft Locknut, -/ Gr. C Clevis Assembly Collar Capscrew, 5/8 x -3/ Gr Capscrew, -/ x 8 Gr BH 2 Capscrew, 5/8 x 3-3/ Gr BH Locknut, 5/ Decal, Direction Decal, Patent Decal, Direction Grease Fitting SP Swivel Pivot Hitch Assy 3-5-2

37 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER AXLE & RELATED PARTS! ^ % ) o i e w t y y t w r & * y t! ) q o i % w e u ^ # Axle Weldment Axle Bushing Capscrew 7/8 x 5 Gr BH Capscrew 7/8 x 5-/2 Gr Lockwasher 7/ Hex Nut 7/ Capscrew x 7-/2 Gr Cushion, Rubber Spring Cup, Spring 2 52BH Locknut, Flanged Axle Pin Capscrew 3/8 X 2-/ Locknut 3/ Capscrew x Gr Locknut Cylinder Pin Cotter Pin 3/6 x -/

38 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING AXLES & RELATED PARTS & y w ^ e r ^ % q % $ $ t # # ) u i o! & i )! o u r e y L.H. WING AXLE i u R.H. WING AXLE t NOTES: L.H. Wing Axle Weldment R.H. Wing Axle Weldment Capscrew x Gr.5 Per Axle Lock Nut Gr.C Per Axle Capscrew 7/8 x 5 Gr.5 Per Axle Capscrew 7/8 x6-3/ Gr.5 Per Axle Lockwasher 7/8 2 Per Axle Hex Nut 7/8 2 Per Axle Pin, Axle Per Axle Capscrew 3/8 x 2-/2 Per Axle Lock Nut 3/8 Per Axle Capscrew x 7-/2 Gr.5 Per Axle Cushion, Rubber Per Axle Spring Per Axle Cup, Spring Per Axle 6 52BH Lock Nut, Flanged Per Axle Turnbuckle Assy. W/O Special Washer See Turnbuckle & Related Parts 3-6-2

39 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TURNBUCKLE & RELATED PARTS y w o e r u u t i u q Order Separately (Not Part of Assembly) Nord Washer (Special) Turnbuckle Assy Body, Swivel Rod Eye, Swivel Rod Eye, Threaded Jamnut -/ 7 9BH Grease Fitting Lock Nut 5/ BH Socket Hd. Capscrew 5/6 x

40 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL AXLE ARMS & RELATED PARTS SINGLE & DUAL SPINDLE July, , , Single Spindle Axle Arm L.H Single Spindle Axle Arm R.H Dual Axle Arm Pin Weldment Cup, Spring Cushion, Rubber Spring, Coil Spring Stop Capscrew, x 7-/2 Gr BH Locknut, Flanged Capscrew, 3/8 x 2-/2 Gr Locknut, 3/ Capscrew, /2 x 3-/2 Gr Lockwasher, / Locknut, / Axle Tube Weldment w/grease Fitting (New Style) Single Spindle Axle and Hub Assy Spindle (New Style) Hub Assy w/cups, Lug Bolts, Nuts & Grease Fittings 7 9BH Grease Fitting Lug Bolt BH Lug Nut Seal, Grease BH Bearing Cone Flatwasher, 3/ SAE 23 20BH Slotted Nut, 3/ NF Cotter Pin Hub Cap Bearing Cup Bearing Repair Kit Retainer, Hub Cap 3-6-

41 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TANDEM AXLE ASSEMBLY (CURRENT STYLE) Tandem Axle Assy. LH Tandem Axle Assy. RH Axle Tube Assy Spindle Frame LH Spindle Frame RH Pin Weldment 592 Flatwasher -/2 SAE Spirol Pin 3/8 x 2-/ Spindle and Hub Assy Hub Assembly 8 55 Lug Bolt 5 9 9BH Grease Fitting 0 555BH Lug Nut Spindle Seal, Triple Lip BH Bearing Cone Bearing Cup Flatwasher 3/ SAE 6 20BH Nut, Slotted 3/ NF Cotter Pin /8 x -/ Hub Cap Bearing Repair Kit Hub Cap Retainer Spring Bushing BH Grease Fitting Rubber Cushion Capscrew x 7-/2 Gr BH Locknut Flanged Spring Cup Spring Capscrew 3/8 x 2-/2 Gr Locknut 3/ Capscrew /2 x 3-/2 Gr Lockwasher / Locknut / Pin Weldment 3-6-5

42 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL WHEEL AND TIRE ASSEMBLIES July, SP SOLID TIRE ASSEMBLY 29SP Solid Tire Assembly SP SEGMENTED TIRE ASSY. 25 Diameter SP Segmented Tire Assembly SP AIR FILLED AIRPLANE TIRE ASSY. 2Ply x SP Air Filled Tire Assembly x

43 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WHEEL AND TIRE ASSEMBLIES SP AIRPLANE TIRE ASSEMBLY BH Tire 29 x 9.0-5/6 Ply Tube 9 x Wheel Flange Set 2005 Capscrew, /2 x Gr Lockwasher, / Hex Nut, / SP Tire Assembly SP FOAM FILLED AIRPLANE TIRE ASSY. 25 x SP Foam Filled Tire Assembly 25 x

44

45 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 BAFFLE KIT (OPTIONAL) t e q o )! y u i r w Baffle, RH Wing Baffle, RH Center Baffle, LH Wing Baffle, LH Center Baffle, LH Wing Extension Baffle, RH Wing Extension Baffle, LH Center Extension Baffle, RH Center Extension Carriage Bolt /2 x -/2 Gr Lockwasher / Hex Nut /

46

47 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 HYDRAULICS WHEN PLUMBING TO TRACTOR REMOTES 9956 Wing Lift Cylinder Axle Control Cylinder Hydraulic Hose Assy. 228" Hydraulic Hose Assy. 96" Elbow 90 degree Breather Plug Restrictor,.078 Orifice Stop Kit Rod,Hose Holder BH Adaptor 9/6 JIC to 3/ SAE Adaptor 9/6 JIC to /2 NPT 3 200BH Capscrew, /2 x 2 Gr Flatwasher, / Locknut, / Pin, Dia Cotter Pin, 3/6 x -/

48 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, Cylinder Assembly Part Number Stamped Here AXLE HYDRAULIC CYLINDER 3.5 Bore X 8 Stroke.25 Rod Diameter 3/ 6 ORB Ports Manufactured by Monarch 9956 WING HYDRAULIC CYLINDER 3 Bore x 2 Stroke.25 Rod Diameter 3/ 6 ORB Ports Manufactured by Monarch Hydraulic Cylinder Assembly 9529 Clevis Cap Rod Cap Piston 953 Rod.25 Dia Cylinder Tube Tie Rod Pin, Dia Cotter Pin, 3/6 x -/ Thread Lock Rod Clevis,.25 x 9522 Set Screw, 3/8 x /2 Knurled Hex Nut, 5/8 UNF Hex Nut, Plug, 3/ Decal, Caution Seal Kit 9956 Hydraulic Cylinder Assembly 950 Clevis Cap Rod Cap Piston 9536 Rod.25 Dia Cylinder Tube Tie Rod Pin, Dia Cotter Pin, 3/6 x -/ Thread Lock Rod Clevis,.25 x 9522 Set Screw, 3/8 x /2 Knurled Hex Nut, /2 - UNC Hex Nut, Plug, 3/ Decal, Caution Seal Kit 3-8-2

49

50 250 GRIFFIN AVE. SELMA, AL (33) (33) PARTS ORDERING FAX