Honeycomb briquette cooling technology Double-coupling IP68 protection, highest waterproof level

Transcription

1 SPECIFICATIONS CustomLite-Modular-TF3A Part Number Chipset Application Operating Life Housing Colours Features Technical Advantages Warranty CustomLite-Modular-TF3A Phillips-Lumileds LEDs Flip Chip Technology Factory & Storage lighting, Showroom & Convention centre lighting, Gyms & Parking lot lighting. 60,000 Hours at L70 Grey, White, Black, Blue Honeycomb briquette cooling technology Double-coupling IP68 protection, highest waterproof level Air Convection Effect Whole-structure Heat Dissipation Tool-less Maintenance Douple-coupling IP68 Protection High-efficacy LED Light Source Flexible Combinations of Modules 5 year limited warranty is standard on luminaire and components The specifications in this document are correct as at the date of publication. Due to our policy of continuous product development, product specifications may change without notice. The information supplied in this document should be used for general reference purposes only. Please consult with your Corporate Lights lighting specialist for more information.

2 ELECTRICAL & PHOTOMETRIC Adopted Lumileds LEDs MODEL TF3A-1 TF3A-2 Input Voltage (V) Frequency AC /60 AC /60 Range (Hz) Drive Current (ma) 700, 860, , 860, 1050 Power (w) 40, 50, 60 80, 100, 120 Luminous Efficacy (lm/w) 105±5, 100±5, 95±5 (M1/2)* 110±5, 105±5, 100±5 (M8) Lumens (lm) 4200±200, 5000±250, 5700±300 (M1/2) 4400±200, 5250±250, 6000±300 (M8) 110±5, 105±5, 100±5 (M1/2)* 115±5, 110±5, 105±5 (M8) 8800±400, 10500±500, 12000±600 (M1/2) 9200±400, 11000±500, 12600±600 (M8) Power Factor Power Efficiency 88% 91% LED Brand Lumileds Lumileds CCT (k) 3000, 4000, 5000, , 4000, 5000, 5700 CRI *For M1/M2 module, Luminous Efficacy of 3000K is 5% lower than other CCTs. MODEL TF3A-1 TF3A-2 Input Voltage (V) Frequency Range (Hz) Drive Current (ma) AC /60 AC /60 600(9P2S), 600(14P2S), 800(9P2S), 800(14P2S), 1000(9P2S), 1000(14P2S), 1200(9P2S), 1200(14P2S) Power (w) 30, 40, 50, 60 80, 100, 120 Luminous Efficacy (lm/w) 150±8, 158±8, 145±8, 153±8, 138±8, 147±8, 130±8, 140±8 (M16) Lumens (lm) 4500±240, 4740±240, 5800±320, 6120±400, 6900±400, 7350±400, 7800±480, 8400±480, (M16) 600(9P2S), 600(14P2S), 800(9P2S), 800(14P2S), 1000(9P2S), 1000(14P2S), 1200(9P2S), 1200(14P2S) 150±8, 158±8, 143±8, 152±8, 135±8, 145±8 (M16) 12000±640, 12640±640, 14300±800, 15200±800, 16200±960, 17400±960 (M16) Power Factor Power Efficiency 88% 91% LED Brand Lumileds Lumileds CCT (k) 3000, 4000, 5000, , 4000, 5000, 5700 CRI 70 70

3 INSTALLATION 1. Fix the luminary onto the mounting surface with M10 screws (provided by customer) at the bracket. 2. Connect the wires to the AC input. Make sure the wiring is correct and grouding is reliable. 3. Loosen the two M8x20 hexagon screws, and loosen the two hexagon M6x20 screws at bracket joint. Set the lamp to the correct angle. 4. Tighten up the two M8x20 screws and the two M6x20 screws. Installation is finished. TF3A-1 TF3A-2 DIMENSIONS TF3A-1 TF3A Mounting Hole Mounting Hole Two protuding stiffeners Two protuding stiffeners

4 Working environment & packing MODEL TF3A-1 TF3A-2 Working Environment -40 ºC ºC, 10% - 90%RH -40 ºC ºC, 10% - 90%RH Storage Temperature -40 ºC ºC -40 ºC ºC IP Rating Whole Fixture IP67 Whole Fixture IP67 Surge Protection 10KV 10KV LED Life Span (h) 50,000 50,000 Housing Material Aluminium Alloy Aluminium Alloy Product Dimensions (mm) 480x250x x250x240 Carton Size (mm) 550x285x x285x240 N.W (kg)* G.W (kg)* *Note above data of weight are all typical values. LIGHT DISTRIBUTIONS M1A Module 00D1010 Beam Angle (50%) 110DEG T5S3040 Beam Angle(50%) 100x30DEG

5 LIGHT DISTRIBUTIONS M2A Module 12D D D3540 Beam Angle (50%) 12DEG Beam Angle(50%) 25DEG Beam Angle(50%) 40DEG 60D D D3030 Beam Angle (50%)60DEG Beam Angle(50%)90DEG Beam Angle(50%)110x40DEG

6 LIGHT DISTRIBUTIONS M8B Module 25D D D2360 Beam Angle (50%) 25DEG Beam Angle (50%) 40DEG Beam Angle(50%) 60DEG 90D5390 Beam Angle(50%) 90DEG LBN1310 Beam Angle (50%)110DEG

7 LIGHT DISTRIBUTIONS M16B Module 40D D D2190 Beam Angle (50%) 40DEG Beam Angle (50%) 60DEG Beam Angle(50%) 90DEG Maintenance Module 1. Disconnect the module from the connector to the driver. 2. Unscrew the two M4x10 screws at both ends of the failed module. 3. Replace the failed module with a new one. 4. Connect and tighten back up each part, step by step. Maintenance is finished. Driver & Electrical Parts 1. Unscrew the two M8x20 screws, set the rotation shaft to the correct angle. Disconnect the driver from the connector to modules. 2. Unscrew the two M4x12 cross recessed pan head screws on the cable clip. 3. Unscrew the four M4x12 screws at the ends of the driver set. 4. Replace the failed driver set with a new one. 5. Connect and tighten back up each part, step by step. Maintenance is finished.

8 Connectors operation guide Indicatrix: Female #1 Indicatrix: Female #2 Indicatrix: Female #3 Indicatrix: Female #4 Front View Back View Male Indicatrix Spin the male terminal clockwise. When the male indicatrix points between indicatrix female #2 and #3, and the gap between male and female terminals is extremely small, the connectors are well connected; otherwise, there will be risks in its waterproof performance. When the gap between male and female terminals is extremely small, if any looseness can be sensed, please spin the male terminal clockwise until tight.

9 ORDERING INFORMATION Example: TF3AS-2-100GY-M1l IN Ordering Information TF 3A S GY - M1 L IN 1. Luminary Type T: Street light TS: Tunnel light TF: High bay light FL: Flood light GL: Garden light 2. Luminary Series 11A 1B 1D 1F 2A 2C 3A 3B 3. Driving Current Blank/N: 700mA S: 700mA 4. Module Qty N: Non-modular luminary 1: 1 module 2: 2 modules 3: 3 modules 4: 4 modules 5. System Power 10: 10W 20: 20W 30: 30W 40: 40W 50: 50W 6. Housing Colour BK: Black WH: White GY: Grey SR: Silver BU: Blue BUWH: Blue top & White base BUGY: Blue top & Grey base OTH: Other 7. Module Series Blank: Non-modular luminary M1: M1 module M2: M2 module M8: M8 module 8. LED Brand L: Lumileds C: Cree O: Osram N: Nichia S: Samsung OTH: Other 9. Lens Code CRI 6: 60 7: 70 8: 80 9: 90 OTH: Other 11. CCT 30: 3000K 40: 4000K 50: 5000K 57: 5700K 12. Driver Brand MO: Moso MW: Mean Well PH: Phillips IN: Inventronics AD: Addayo OTH: Other REVISION HISTORY Change Date REV DESCRIPTION OF CHANGE 2016/10/31 Rev1.0 Datasheets Release Item From To