Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol

Transcription

1 W WWW mphenol iniature ylindrical onnectors W eets I , eries 1 pecifications.t.t.t O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. mphenol WW.100Y.O. WW.100Y.O. WWW 100Y.O. WWW. WW W.100Y.O. W.

2 WW Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility , 2 onnector election uide Insert availability , 5 Insert availability reakaway Twist ull lternate positioning Insert arrangement patterns T,, /T roprietary/i , eries 1 ayonet oupling, older ontacts eneral Information, pecifications, ervice lass , 13 T00 (3110), 00 wall mounting receptacle T01 (3111) cable connecting receptacle T02 (3112) 02 box mounting receptacle T06 (3116) 06 straight plug T07 (3114) 07 jam nut receptacle T08, degree plug T onnectors with rinted ircuit oard ontacts - box mount receptacle, jam nut receptacle T, thru bulkhead receptacle eneral Information, pecifications - T hermetic TI (3113) hermetic solder mounting receptacle T02 hermetic box mounting receptacle T07 (3114) hermetic jam nut receptacle T reakaway twist pull plug T,, /T how to order T-, -, /T- roprietary/i , eries 1 ayonet oupling, rimp ontacts eneral Information, pecifications, ervice lass , 29 T00 (3120), 00 wall mounting receptacle (3128) wall mounting receptacle T01 (3121) 01 cable connecting receptacle T02 (3122) 02 box mounting receptacle (3127) box mounting receptacle T06 (3126), 06 straight plug T07 (3124) 07 jam nut receptacle T08, degree plug T- reakway twist pull plug T-, -, /T- how to order T-, - ayonet oupling, rimp ontacts eneral Information, pecifications, ervice lass , 41 T00, 00 wall mounting receptacle T01, cable connecting receptacle T02, 02 box mounting receptacle T06, 06 straight plug T07, 07 jam nut receptacle T08, degree plug T- reakawat twist pull plug T-, - how to order Threaded oupling, older ontacts eneral Information, pecifications, ervice lass , wall mounting receptacle cable connecting receptacle box mounting receptacle straight plug jam nut receptacle eneral Information, pecifications - hermetic I hermetic solder mounting receptacle hermetic box mounting receptacle hermetic jam nut receptacle how to order , - Threaded oupling, rimp ontacts eneral Information, pecifications, ervice lass , - how to order ccessories pplication tools ontacts, ower and Thermocouple rimp ontacts, hielded oax ounting ecommendations Other mphenol iniature ylindrical onnectors , 79 mphenol ales Office and uthorized istributor isting roprietary/i eries 1 connectors covered in this catalog are widely used in general duty and environmental applications, both industrial and military. arkets that use this family of connectors include: Instrumentation onitoring quipment achine Tool, actory utomation ommunications eophysical Industrial ontrols and obotics Oil and etrochemical Industries ail/ass Transit ilitary/erospace If more information is needed concerning the connectors covered in this publication, or if there are special application needs, please contact: mphenol orporation mphenol erospace mphenol Industrial Operations elaware venue idney, ew York Telephone: ax: lease go to the mphenol websites to view, download and save this catalog and most all of mphenol interconnection product literature O. O. ome miniature connector styles are available in o ompliant versions. lease contact mphenol Industrial Operations for more information..o. Y.O. mphenol o mphenol operates Quality ystems that are certified to IO9001: 2000 by third party registrars. 0Y.O. OT: The connector products in this brochure were formerly known as endix products. These products are now manufactured and sold under the mphenol brand name. The name mphenol will replace the name endix on products and literature in the future. OT: The iniature I , eries 2 connectors T- and /T- (formerly in this catalog) are no longer supplied with these designations. mphenol now supplies the mphenol /atrix I , eries 2. (ilitary numbers include , 3474, ). lease refer to page 78 for a brief description of the mphenol /atrix I , eries 2 bayonet coupling connectors with crimp, rear insertable and rear releasable contacts, and ask for catalog for detailed information on this series. 00Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. U / 2002 / / 95

3 WW mphenol iniature ylindrical onnectors roprietary/i , eries 1 mphenol iniature ylindrical connectors offer twice the number of contacts in just half the size of a tandard connector. These miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost considerations and provide maximum design flexibility. There are two styles within the family that are approved and qualified to I , eries 1, and in addition there are several proprietary styles. ommon features of all styles: ll are for general duty applications and environmental sealing is achieved with the grommet and clamp design. Operating temperature is from 55 to +125 ; Operating voltage to 1000 V () at sea level. in and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an indefinite shelf life. ll have resilient inserts which provide high dielectric strength and moisture barrier. variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles..t T older jam nut receptacle and mated straight plug T older wall mount receptacle T- rimp wall mount receptacle and mated straight plug Threaded rimp straight plug and wall mount receptacle ayonet oupling with older ontact Termination T, /T (solder) and proprietary versions actory installed solder contacts 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors except threaded series. /T meets I eries 1, service classes, and. /T is U recognized. (solder) eries is a modification of the T with same features except a wider flange for back panel mounting ayonet oupling with rimp ontact Termination T-, /T- (crimp) and proprietary versions rimp rear insertable/front release contact termination. (closed entry socket insert prevents probe damage). 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors except threaded series. /T- meets I eries 1, service classes,,. - (crimp) odification of the T- with wider flange for back panel mounting T-, - (crimp) Incorporates a special one-piece insert and grommet assembly Threaded oupling with older ontact Termination (solder) roprietary ouble stub threaded coupling and single hole polarization. actory installed solder contacts Threaded oupling with rimp ontact Termination Two threaded styles are offered in some shell sizes. oth have crimp front release and front removable contacts, but they have different retention systems. - (crimp) roprietary - with spring tower retention system pring tower retention system - (crimp) roprietary - with nylon wafer dielectric system 1 Options 7 shell styles with 60 insert patterns ermetic seal (glass fusion) receptacle styles available ressurized thru bulkhead receptacle style available reakaway quick disconnect styles I filter protection styles re-installed coax solder contacts are available rinted circuit board contacts are available O. O. Options 6 shell styles with 47 insert patterns reakaway quick disconnect style available oax and thermocouple contacts are available.o. Y.O Y.O Y.O. Options 5 shell styles with 60 insert patterns ermetic receptacles available ressurized thru bulkhead receptacle style available re-installed coax solder contacts are available..100y.o Options 5 shell styles (consult mphenol for availability of shell sizes and insert patterns) W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

4 WW mphenol iniature ylindrical design flexibility The large family of miniature proprietary and style connectors provides for many optional features and designs. In addition to the choices of bayonet or threaded shells, solder or crimp termination within the style variations, there are additional options that are shown here. ermetics ermetically sealed receptacles have fused compression glass sealed inserts which provide envionrmental moisture sealing. There are three hermetic styles within the T bayonet series and three hermetic styles within the threaded series. oaxial ontacts mphenol iniature connectors can incorporate shielded coax contacts. ize 8 and 12 crimp coax contacts are available in T-, -, /T-. actory installed size 8 and 12 solder type coax contacts are available in T,,/T connectors. ee coax contact information pages at the end of this catalog..t rinted ircuit oard Tail ontacts T bayonet connectors in box mounting receptacle and jam nut receptacle styles are available with printed circuit board contacts. tandard tails for I connectors have gold plating,.0050 inches over nickel. ee page 20 and call mphenol for further information. lex ircuitry lex termination assemblies for attaching cylindrical connectors to printed circuit boards are available through the mphenol division T, dvanced ircuit Technology. lex can be used with miniature connectors and it can be designed to meet specific length, current carrying capacity and to fit the precise geometric shape of the connector to board package. lex circuity plugs into a printed circuit board and creates a self-locking terminal pad which eliminates the need for an additional interconnect to the. reakaway, Twist ull iniatures Quick disconnect breakaway styles are shown in this catalogs. These are available in T solder style plugs (page 26), T- crimp style plugs (page 38) or T- crimp style plugs (page 48). Quick disconnect of the connector plug from the receptacle is accomplished with axial pull on the lanyard. This instant decoupling and damage free separation is ideal for weapons release and blind or difficult accessibility situations. eparation forces vary per connector series. The plug and receptacle need to be fully mated before disengagement by the lanyard pull. ilter rotection mphenol offers the T eries which combines the miniature T series with an I filter. esigned to provide I protection for sensitive circuits, each circuit is individually filtered within the connector, eliminating the need for costly and bulky exterior network filters. ilter contacts are available in,, V, and U ranges and are intermateable and intermountable with I connectors. or further information see catalog , mphenol I ilter Transient rotection onnectors. (online at onnector with ermetic eal Insert and oax ontacts onnector with I ilter rotection Overmolded able Overmold seals and cables can be designed for almost any industrial application. variety of materials are available: neoprene, hypalon and others; and a variety of lengths can be designed to meet customer specifications. Overmold seals to the rear of the connector and to the cable jacket providing moisture sealing onnector with Tail ontacts O. O onnector with lex.o. Y.O Y.O. reakaway Twist ull Y.O onnector with Overmolded able W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

5 WW mphenol iniature ylindrical connector selection guide The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to meet the application requirements. urther information can be found in specific sections of this catalog. TITI I/ = ear Insertion/ront eleasable o intermates with o X intermates with X Optional finishes available. ee how to order sections. * vailable in hermetic version ** ual mounting holes *** This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. older T /T mphenol /atrix I , eries 2 bayonet coupling connectors with rear insertable and rear releaseable contacts are covered in another catalog - ee pagexx for a brief description and see complete details in catalog which is online at 3 rimp / T- T- - - T- - - Intermateable o o o X o o o X o o X ontacts older ontact etention ystem rimp I/.T on-emovable emovable. oupling ayonet Threaded tandard inishes Olive rab admium (003). nodic oated (005) right admium (001) Temperature ange esilient ielectric ( 55 to +125 ) O. Wide ounting lange ermetic eal O. TY VIIITY Wall ounting eceptacle 00 **.O. able onnecting eceptacle 01 *** ox ounting eceptacle 02 * * ** traight lug 06 Y.O. am ut eceptacle 07 * * * Thru-bulkhead eceptacle T 0Y.O. older ount eceptacle I * * * 90 lug 08 00Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

6 WW mphenol iniature ylindrical insert availability Insert rrangement older Termination /T T ermetic T -T rimp Termination /T- T- - - T- - - Total ontacts ontact ize oax X X X X* 1 1 I 8-2 X X X X X X 2 2 I 8-3 X X X X X X 3 3 I 8-4 X X X X X X 4 4 I 8-33 X X X X X 3 3 I 8-98 X X X 3 3 I.T 10-2 X X X 2 2 I 10-5 X X X X* 5 5 I 10-6 X X X X X X X 6 6 I. ervice ating X X X 1 1 oax X X X X X* X 6 6 I 12-3 X X X X X X X 3 3 II X X X X* 4 4 I 12-8 X X X X X* X X 8 8 I X X X X X X X I O X X X I X X X I 14-2 X X X 2 2 II O X 4 4 I 14-5 X X X X X X X 5 5 II 14-8 X X X I X X X X X X X I.O X X X X X X X I X X X X X* X X I X X X X X X X I Y.O X* I X X (02) I V X X X* 3 3 ** 0Y.O X X X X 4 4 I 16-8 X X X X X X X 8 8 II X X X X X X I 00Y.O X X X X X X X I X X X / X* ***.100Y.O X X X X X I 18-5 X X X X* 5 5 II I.100Y.O X X X X X X X II X X X X X* X X I *ot available in version **lashover voltage 5,000 V () ***1500 V () designates ocket insert only. designates in insert only. ize 12 contacts for #10 wire ot presently tooled ontacts must be ordered separately W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

7 WW mphenol iniature ylindrical insert availability, cont. Insert rrangement older Termination /T T ermetic T -T rimp Termination /T- T- - - T- - - Total ontacts ontact ize oax X X X X X X X I ervice ating X* oax, II X X X / X X X 4 4 oax II X X X X oax, I.T V X* X 6 6 ** X X X X X X X II X X X X X I X X X I X X X I X X X X X I X X X X X X X I X X X X X X X I oax O V X X X 7 7 i-voltage 22-7 X X X X* 7 7 oax X X X X X X X II O X* I X X X X X I X X X X I X X X X I.O X X X X X X X I X X X X X X X I X X X I, oax Y.O I, oax X X X / X* 7 7 oax 0Y.O X* 7 7 II X X X X I X* I 00Y.O X X X X X X X I X X X / oax.100y.o. *ot available in version **lashover voltage 5,000 V () ***1500 V () ize 12 contacts for #10 wire ot presently tooled ontacts must be ordered separately.100y.o. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. IT VIIITY

8 WW mphenol iniature reakaway Twist ull insert availability Insert vailability - reakway Twist ull rimp Termination older Termination ontact ize Insert rrangement T- T- T Total ontacts ervice ating 8-2 X X 2 2 I 8-3 X X 3 3 I 8-4 X X 4 4 I 10-2 X 2 2 I 10-6 X X X 6 6 I X X 6 6 I X X 7 7 I 12-3 X X X 3 3 II 12-4 X 4 4 I 12-8 X X X 8 8 I X X X I X I 14-2 X 2 2 II 14-5 X X X 5 5 II 14-8 X I X X X I X X X I X II X X X I X X X I X X 3 3*.V X 6 6 I 16-8 X X X 8 8 II X X X I X X X I X X I 18-5 X X 5 5 II X X X II X X I X X X I X X X I X X 6 6*.V X 8 8 I X X X II X X I X I X X I X X X I X X X I 22-8 X 8 8 II X X X II X I X X X I X X I X X I X X I X X X I X 7 7 II X II X II X I X X X I * 5V Voltage ating ize 12 contact for #10 wire. 6 or further information regarding any additional insert patterns available in reakaway iniature connectors, please contact mphenol erospace. or availability of shielded coax contacts within reakaway iniature connectors contact mphenol.the reakaway style pages are: T (solder) breakaway plug is on page 26, the T- (crimp) breakaway plug is on page 38, and the T- (crimp) breakaway plug is on page 48..T O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

9 WW mphenol iniature ylindrical alternate positioning lternate ositioning To avoid cross-plugging problems in applications requiring the use of more than one miniature cylindrical connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. s shown in the diagram at right, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. hell ize Insert rrangement Insert otation egrees W X Y * * * * * * * * * * * * * * * * V * * * * osition W osition X osition Y osition Views looking into front face of pin insert or rear of socket insert..t Insert otation hell Insert egrees ize rrangement W X Y * * * O V * O O * * Y.O * Y.O Y.O * Y.O * Y.O * W.100Y.O * vailable in ermetic lass W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

10 WW mphenol iniature ylindrical insert arrangements front face of pin inserts illustrated Insert rrangement ervice ating I I I I I I I.T umber of ontacts ontact ize O. Insert rrangement ervice ating I I oax I II I I umber of ontacts O. ontact ize oax O. Insert rrangement ervice ating I I I II I II I umber of ontacts ontact ize T U 8 U V T Insert rrangement V lashover ervice ating I I I I I I 5,000 V () umber of ontacts ontact ize oax 20 Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW or contact legend see page 61. WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

11 9 Insert rrangement V ervice ating oax II I, oax umber of ontacts ontact ize 8 oax 12 oax 8 oax 20 8 oax 20 Y X W V U T Y X W V U T a b c T Y X W V U Y X W V U T a b c d e f g Y X W V U T a b c d e f g h j mphenol iniature ylindrical insert arrangements front face of pin inserts illustrated Insert rrangement ervice ating I II I I / umber of ontacts ontact ize oax Insert rrangement ervice ating I II I II umber of ontacts ontact ize 20 12* 2 oax* Insert rrangement ervice ating I I II, oax / umber of ontacts ontact ize oax oax lashover V () *ontact ositions Optional lashover 5,000 V () WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

12 10 Y X W V U T a Y X W V U T a b Y X W V U T a b c d Y X W V U T a r p n m k j h g f e d c b i q Y X W V U T a t s r p q n m k j i h g f e d c b X W V U T Y X W V U T a b b a h c T j g d Y X W V U f e mphenol iniature ylindrical insert arrangements front face of pin inserts illustrated Insert rrangement ervice ating II I I I umber of ontacts ontact ize Insert rrangement ervice ating I I I oax umber of ontacts ontact ize oax Insert rrangement ervice ating i-voltage oax II I umber of ontacts ontact ize 20 8 oax Insert rrangement ervice ating I I I I umber of ontacts ontact ize Y X W V U T a l k j h g f e d c b T V U f W m h g e X n l j d a c b Y k Y X W V U T a t s r q p n m k j i h g f e d c b T U V W X Y a b c WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

13 WW mphenol iniature ylindrical insert arrangements front face of pin inserts illustrated U T V n W m p k X q Y z r j s y a i t x u b h w v c g d f e Insert rrangement ervice ating I I, oax I, oax / umber of ontacts ontact ize oax 20 8 oax oax a b Y c u v X d t w e W x s f V y r g U z q h T p i n j m k Insert rrangement ervice ating oax II I I umber of ontacts ontact ize 8 oax 12 for oax 11 # 10 wire V W X q r y a Y s t b z u d e p f U n g T m x w v h k j i Insert rrangement ervice ating I / oax umber of ontacts ontact ize oax 20 8 oax T U.T O. O Y.O Y.O Y.O V c Y X W f e V ymbol a g d U b c T Q ontact egend ontact ize.100y.o. W.100Y.O V V U W T X Y 12 oax W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. r q s p 8 oax t U y x n u a m b V T j c v z k w d i e h f g

14 WW mphenol T,, /T roprietary/i , eries 1 bayonet coupling and solder termination wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle thru bulkhead receptacle mphenol solder contact miniature cylindrical connectors meet the most critical application needs. esign versatility combined with high reliability performance makes these series of iniature ylindrical onnectors ideal for environmental sealing or pressurized applications. The /T eries is qualified to I , eries 1 and has all the outstanding design characteristics and quality of the T eries. The eries is a modification of the T, providing special shells with a wide mounting flange for back panel mounting. corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the T and /T. The is given a durable non-conductive hard anodic lumilite coating which provides abrasion protection and resistance to corrosion. hell components for these series are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. pring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. oth the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. oth pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. breakaway style plug is available in the T solder series. ermetics receptacles are available in T and / T solder series. eceptacles with printed circuit board contacts are also available. T older is U recognized under file #115497, Vol. 1, ec. 5. The T, and /T eries are intermateable and intermountable with all existing iniature ylindrical eries connectors except for the threaded coupling eries..t O. O Y.O. breakaway twist pull plug efer to pages 4-11 for insert arrangement availability. T,, /T 0Y.O ontact ize ervice ating OTT T/OTO TI Test urrent ontact pecifications aximum illivolt rop older Well iameter older Well epth 00Y.O Y.O ecommended Operating Voltage at ea evel ervice ating ea evel Test Voltage (), 60 cps W.100Y.O ,000 ft. 70,000 ft. 110,000 ft. I 600 1, II 1,000 2, W.100Y.O. WWW ilver plated wire per I * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with a straight or 90 degree plug. WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

15 T, ervice lasses T and connectors are available in the service classes listed below. ach class, with the exception of hermetic, offers one or more means of terminating or supporting a cable or wire bundle. lass W is not available in the eries. eneral duty; back shell is threaded for conduit attachment of 3057 cable clamp () eneral duty, with strain relief clamp for cable or wire bundle support ressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a temperature range of 65 to +257 nvironmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires () nvironmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ame as W class except with strain relief Translucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring () train relief clamp suitable for retaining customer applied potting compounds, with provision for wire support W * ompressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. Telescoping sleeves ( 3420) can be used to adapt to cables smaller than minimum close-down. ermetically sealed with compression glass inserts (see pages 22-25) tyle with printed circuit board contacts- see page 20. reakaway style - see page 26. /T ervice lasses The /T iniature connector is available in the following certified service classes: nvironmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires WW WW rommet seal with strain relief clamp Translucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring 13 general duty.t. (), / strain relief. O. O. / open wire seal.o. Y.O. / potting boot 0Y.O Y.O W cable seal.100y.o. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. T,, /T YOT OUI WIT O OTT

16 WW T00 (3110) 00 wall mounting receptacle eneral uty/ ressurized V (T).375 I T00-XX-XXX T00-XX-XXX () 00-XX-XXX 00-XX-XXX () T00-XX-XXX T00-XX-XXX () 00-XX-XXX () T00-XX-XXX () 00-XX-XXX () 3110-XX-XXX To complete part number see how to order on page 27. () located within.0025 of (T) TITIO I (), (), (), Open Wire eal / train elief (T) T.120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles T00-XX-XXX 00-XX-XXX 3110-XX-XXX 14 otting oot T00-XX-XXX 00-XX-XXX 3110-XX-XXX W able eal T00W-XX-XXX able eal X T00-XX-XXX 3110-XX-XXX eceptacle ront View eceptacle ide View lass, Q V hell (T) Thread Thread ize T T.005 T T lass 2 T in. lass U U U U U U U lass (), (), (), / lass, / lass, / lass W, hell X ize Thread in. in. losed ree ll dimensions for reference only..t O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Q W 0Y.O. Y.O. WW W W

17 WW T01 (3111) cable connecting receptacle eneral uty T01-XX-XXX Y 15 TITIO I (), (), (), Open Wire eal / train elief T01-XX-XXX () T01-XX-XXX () T01-XX-XXX () 3111-XX-XXX ote: This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 27. ll dimensions for reference only. V.375 I T01-XX-XXX 3111-XX-XXX Q otting oot T01-XX-XXX 3111-XX-XXX W able eal.t T01W-XX-XXX able eal X T01-XX-XXX 3111-XX-XXX ecept. ront View eceptacle ide View lass, hell ize ±.020 Y ± Q Thread lass 2 in. V Thread lass U U U U U U U lass (), (), (), / lass, / lass, / lass W, hell X ize Thread in. in. losed ree O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

18 WW T02 (3112) 02 box mounting receptacle T02-XX-XXX 02-XX-XXX * T02-XX-XXX * 02-XX-XXX * T02-XX-XXX * 02-XX-XXX 3112-XX-XXX * T02-XX-XXX * 02-XX-XXX 3112-XX-XXX * T02W-XX-XXX * 02W-XX-XXX To complete part number see how to order on page 27. () located within.0025 of (T) * The T02 and 02 box mounting receptacles are made only to complete a series; no provision is made for accessories or potting on the rear skirt. eceptacle ront View eceptacle ide View (T) hell ia. ize T T.005 T T T ll dimensions for reference only. (T) (T) T.120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles.t O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW 16 WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

19 WW T06 (3116) 06 straight plug eneral uty T06-XX-XXX 06-XX-XXX T06-XX-XXX * vailable in T06 only ll dimensions for reference only. V.375 I TITIO I (), (), (), Open Wire eal / train elief T06-XX-XXX () 06-XX-XXX () T06-XX-XXX () T06-XX-XXX () 06-XX-XXX () T06-XX-XXX () T06-XX-XXX () 06-XX-XXX () T06-XX-XXX () 3116-XX-XXX To complete part number see how to order on page 27. T06-XX-XXX 06-XX-XXX T06-XX-XXX 3116-XX-XXX 17 otting oot T06-XX-XXX 06-XX-XXX T06-XX-XXX 3116-XX-XXX W able eal.t T06W-XX-XXX 06W-XX-XXX T06W-XX-XXX. able eal. O. O. X T06-XX-XXX 3116-XX-XXX lug ront View lug ide View lass hell ize Q Thread lass 2 in. V Thread lass U U U U U U U * O. Y.O Y.O Y.O. lass (), (), (), / lass, / lass, / lass W, hell X ize Thread in. ±.010 in. losed ree * Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Q Y.O. WW W W W 0Y.O.

20 WW T07 (3114) 07 jam nut receptacle Open Wire eal T07-XX-XXX 07-XX-XXX 3114-XX-XXX To complete part number see how to order on page 27. TITIO I (), (), (), / train elief T07-XX-XXX () 07-XX-XXX () T07-XX-XXX () 3114-XX-XXX 18 eneral uty/ ressurized eceptacle T07-XX-XXX T07-XX-XXX.T otting oot. T07-XX-XXX 3114-XX-XXX ecept. ront View eceptacle ide View lass, / ia. lat anel Thickness hell ize ± in. Thread lass 2 U ± lass (), (), / lass () lass, / hell ize Thread Thread * * ize 24 strain relief available in T only. ll dimensions for reference only O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

21 WW T degree plug TITIO I Open Wire eal, () train elief T08-XX-XXX 08-XX-XXX T08-XX-XXX () 08-XX-XXX () To complete part number see how to order on page 27. ll lockwire holes are.044 ia. in. hell ize lug ront View ia. ll dimensions for reference only. ± lass, () ± T08-XX-XXX 08-XX-XXX lug ide View ±.057 ±.025 otting oot 75 degrees.t O. O. ±.015 lass.o. ± Y.O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

22 WW T onnectors with rinted ircuit oard ontacts ox ounting eceptacle (T02) with ontacts Order by applicable part number in chart below; add insert arrangement number. efer to insert availability on pages () located within.0025 of (T) hell ize ll dimensions for reference only. hell ize art umber* T02 with ontacts art umber* T07 with ontacts ll dimensions for reference only. eceptacle ront View eceptacle ront View (T) ± ia lat eceptacle ide View ±.010 eceptacle ide View anel Thickness in. Thread lass XXX U XXX U XXX U XXX U XXX U XXX U XXX U XXX U XXX U XXX U XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX am ut eceptacle (T07) with ontacts ll lockwire holes are.044 ia. in. Order by applicable part number in chart below; add insert arrangement number. efer to insert availability on pages (T) (T) 4 O.120 ±.005 ia. (.147 ±.005 ia., size 24) ia * or o compliance connectors with contacts change 71 - to: 58 designates conductive black zinc cobalt plating 93 designates non-conductive black zinc cobalt plating.030 ±.001.T O. O ±.001 Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

23 WW T thru bulkhead receptacle * T-XX-XXX * -XX-XXX * To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add ; xample: T If a rotation is required, use T and add W, X, Y or. xample: T W. The socket end of the insert always appears at the dimension end of shell. () located within.0025 of (T) hell ize eceptacle ront View ll dimensions for reference only. (T) (T) T.120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles.t O. O eceptacle ide View (T) T T ± T.O Y.O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

24 T hermetic WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. solder mounting receptacle box mounting receptacle jam nut receptacle 22 Three shell styles are available in the hermetic T bayonet series: TI (3113) T02 T07 (3114) These hermetic connectors are only available with solder cup or flat eyelet pin contacts in the /T version. ocket contacts are available in some proprietary T versions. Other design characteristics of the T hermetic connector series are as follows: hell sizes: 8 through 24 (tin plated) ontact count: 2 through 61. efer to pages 4 and 5 for insert availability for hermetics. urrent: 5.0 amp each #20 contact 10 amp each #16 contact 17 amp each #12 contact ontacts are tin plated for T; gold is optional ielectric Withstanding Voltage (sea level): 1500 volts () 60 cps, ervice ating I 2300 volts () 60 cps, ervice ating II ompression glass inserts, permanently lettered elium eakage: ess than 1.0 X 10-6 cc/sec. at 15 psi differential hysical hock: 100 s Vibration: xceeds I rocedure II Thermal hock: o deterioration or failure after 5 cycles at 55 to +257 Intermateability: ates with 3116 and T06 efer to pages 4-11 for insert arrangement availability.

25 WW TI (3113) hermetic solder mounting receptacle hell ize.t ecept. ront View ia. ia ll dimensions for reference only. * TI-XX-XXX ** TIY-XX-XXX ** 3113-XXXXX TI-XX-XXX (100) TIY-XX-XXX (100) 3113-XXYXXX To complete part number see how to order on page 27. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal eceptacle ide View ia W O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW W Y.O. WW W W W 0Y.O.

26 WW T02 hermetic box mounting receptacle (T) To complete part number see how to order on page 27. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal () located within.0025 of (T) ll dimensions for reference only. (T) T.120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles.t. * T02-XX-XXX ** T02Y-XX-XXX T02-XX-XXX (100) T02Y-XX-XXX (100). O. O. eceptacle ront View eceptacle ide View hell ize (T) ±.016 ia ± ia U O. Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW 24 WW.100Y.O. WWW U Y.O. WW W W W W 0Y.O.

27 WW T07 (3114) hermetic jam nut receptacle hell ize eceptacle ront View ex ll dimensions for reference only. To complete part number see how to order on page 27. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal T * T07-XX-XXX ** T07Y-XX-XXX ** 3114-XXXXX T07-XX-XXX (100) T07Y-XX-XXX (100) 3114-XXYXXX. O. O eceptacle ide View.O. anel Thickness in. Thread lass U.206 Y.O U.206 0Y.O U Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

28 WW T reakaway twist pull plug The T miniature breakaway connector has the following design features: solder contacts, potted termination instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated intermateable with standard receptacles operating voltage to 900 V () at sea level same quick positive bayonet coupling and 5 key/ keyway polarization as other T styles art umber* hell ize ia. ±.016 ±.010 ll dimensions for reference only. * ee inish information below to determine prefix 71 or 72 in part number. rawing above shows standard lanyard length Order by mphenol ropriety number as follows (example part number shown): reakaway lug with T older ontacts, otted Termination XX-( ) XX-( ) 1. inish 71 designates corrosion resistant olive drab cadmium plate 72 designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hour extended salt spray. 2. onnector Type Identification 3048 designates T plug, solder, potted termination style 3. hell ize and Insert rrangement umber ee insert arrangement availability for iniature reakaway connectors on page 6. The numbers in the insert arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is the insert arrangement number. 4. ontact Type/lternate Insert otation designates pin, designates socket for normal positioning of inserts. When an alternate position of the insert is required to prevent cross-mating a different letter (other than or ) is used. ee page 7 for description of alternate positions; then convert to mphenol proprietary coding by the chart at right to complete the part number ± OT IT Y U TUT IT.200 ±.031 I I IT.T O. O Y.O Y.O Y.O in ontacts ocket ontacts mphenol etter quates to letter mphenol etter quates to letter W W I X X Y Y W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

29 WW T,, /T how to order T, To more easily illustrate ordering procedure, part number T W() is shown as follows: T W () ee code below: 1. onnector Type T designates standard olive drab, electrically conductive cadmium plate bayonet lock connector with solder contacts designates electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger flange and mounting holes for back panel mounting T designates plug with grounding fingers 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle** 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 degree plug cable support designates thru bulkhead receptacle (pressurized) I designates solder mount receptacle (ermetic only) 3. ervice lasses designates general duty back shell designates pressurized receptacle designates environmental resisting open wire seal with grommet and nut designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief designates assembly with potting boot W designates clamp assembly for moisture proofing multi-jacketed cables designates hermetic* without interfacial seal Y designates hermetic* with interfacial seal 4. hell ize 20 designates shell size. hell sizes 6 through 24 available. 5. Insert rrangement - efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts designates socket contacts or ordering connectors with printed circuit board contacts, see pg Insert otation - efer to page 7. W, X, Y, designate that insert is rotated in its shell from normal position. o letter required for normal (no rotation) position. 8. designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on T ) (005) anodic coating - lumilite (standard on ) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (100) uffix added for flat eyelet pin contacts in hermetic versions O o ompliant finish suffix as follow: (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (470) non-conductive black zinc cobalt plating with strain relief 27 (476) conductive black zinc cobalt plating with strain relief U mphenol / o 2002 / 95 / /T I , eries 1 art number W is shown as follows: W or ermetic connectors part number Y41W is shown as follows: Y 41 W , ee code below: 1. designates ilitary tandard 2. pecification umber 311 designates basic family number for I , eries 1 solder type 3. hell tyle 0 designates wall mounting receptacle 1 designates cable connecting receptacle** 2 designates box mounting receptacle 3 designates solder mount receptacle (hermetic only) 4 designates jam nut receptacle 6 designates straight plug 4. ervice lass designates environmental resisting connector designates environmental resisting connectors with strain relief designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief designates potted type with potting boot designates hermetic 5. hell ize 20 designates shell size. hell sizes 8 through 24 available. 6. Insert rrangement - efer to pages 4-11 for insert availability designates arrangement. (The number following the hyphen is the number only that is used in the part number). ermetic version 20Y41 designates insert arrangement; specify Y for flat eyelet pin contacts, or for solder cup pin contacts 7. ontact onfiguration designates pin contacts designates socket contacts 8. Insert otation- efer to page 7. W, X, Y, designate that insert is rotated in it shell from normal position. o letter require fo normal (no rotation) position..t O. O Y.O Y.O Y.O * ermetic connectors are supplied with tin plated shells. W.100Y.O. ** This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. W.100Y.O. WWW or ordering iniature reakaway T older connectors see pg. 26. WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OW TO O T,, /T

30 WW mphenol T-, -, /T- roprietary/i , eries 1 bayonet coupling and crimp termination wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle breakaway twist pull plug 28 mphenol crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by an approved spring tower retention system. The /T- eries is qualified to I , eries 1 and has all the outstanding design characteristics and quality of the T eries. The - eries is a modification of the T-, providing special shells with a wide mounting flange for back panel mounting. corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the T- and /T-. The - is given a durable non-conductive hard anodic lumilite coating which provides abrasion protection and resistance to corrosion. hell components for these series are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. pring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. oth the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. oth pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. reakaway style plug is available in T- crimp. The T-, - and /T- eries are intermateable and intermountable with all existing iniature ylindrical eries connectors except for the threaded coupling eries..t O. O Y.O Y.O Y.O. efer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug..100y.o W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW W 0Y.O. Y.O. WW W W

31 T-. -, /T- ontact ize ilver plated wire per I T- and - ervice lasses T- and - connectors are available in the three service classes listed below. Open wire sealing - environmental resistant, with a nut and grommet for moisture proofing individual wires ()train relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring reakaway style - see page 38. /T- ervice lasses - series connectors are available in the following certified service classes: Test urrent ontact pecifications aximum illivolt rop rimp Well iameter inimum Well epth ± ± ± ervice ating WW WW ecommended Operating Voltage at ea evel ervice ating Test Voltage (), 60 cps ea evel 50,000 ft. 70,000 ft. 110,000 ft. I 600 1, II 1,000 2, Open wire sealing - environmental resisting connectors are supplied with a multi-hole grommet and clamping nut for moisture proofing individual open wires nvironmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support otting applications - these connectors are supplied with a translucent nylon boot for retention of customer applied potting compound 29, / open wire seal.t O. (), / strain relief clamp O Y.O Y.O. / potting boot 00Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. T-, -, /T- YOT OUI WIT I OTT

32 WW T00 (3120) 00 wall mounting receptacle Open Wire eal T00-XX-XXX 00-XX-XXX 3120-XX-XXX To complete part number see how to order on page 39. () located within.005 of (T) * ack panel mounting ll dimensions for reference only. (T).T TITIO I (), / train elief T00-XX-XXX () 00-XX-XXX () 3120-XX-XXX 30 otting oot. T00-XX-XXX 00-XX-XXX eceptacle ront View eceptacle ide View T ia. ia * hell (T) ± anel Thickness ize T T T.005 ±.016 T T lass, / lass (), / lass, / hell ize ia. ax ia. ia. ia (T). O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW T ia. 4 oles Y.O. WW W W W 0Y.O.

33 WW (3128) wall mounting receptacle hell ize / Open Wire eal 00-XX-XXX 3128-XX-XXX To complete part number see how to order on page 39. () located within.0025 of (T) ll dimensions for reference only. eceptacle ront View 1 T ia. ±.005 T 1 ia. ±.005 TITIO I ia ¹ (T) (T) ± ¹ (T) (T) T ia. 4 oles.t / train elief O. T¹ ia. 4 oles 00-XX-XXX () 3128-XX-XXX O. eceptacle ide View lass / in. lass /.O Y.O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ia.

34 WW T01 (3121) 01 cable connecting receptacle / Open Wire eal T01-XX-XXX 01-XX-XXX 3121-XX-XXX ll dimensions for reference only. TITIO I (), / train elief T01-XX-XXX () 01-XX-XXX () 3121-XX-XXX ote: This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page , / otting oot T01-XX-XXX 01-XX-XXX 3121-XX-XXX eceptacle ront View eceptacle ide View lass, / lass (), / lass, / hell ize ia ±.018 ia. ia. ia. ia T O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

35 WW T02 (3122) 02 box mounting receptacle To complete part number see how to order on page 39. () located within.0025 of (T) hell ize ll dimensions for reference only. (T) eceptacle ront View (T).T T ia. 4 oles T02-XX-XXX 02-XX-XXX 3122-XX-XXX O. O eceptacle ide View T ia ia. ± T T T.005 T ±.016 T.O Y.O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ia

36 WW (3127) box mounting receptacle T ia. 4 oles To complete part number see how to order on page 39. () located within.0025 of (T) ll dimensions for reference only. ¹ (T) (T) T¹ ia. 4 oles ¹ (T) (T) 02-XX-XXX 3127-XX-XXX. O. O eceptacle ront View eceptacle ide View hell ize ia T ±.005 T 1 ±.005 ia ± Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW 34 Y.O. WW W W W 0Y.O.

37 WW T06 (3126) 06 straight plug hell ize, / Open Wire eal T06-XX-XXX 06-XX-XXX T06-XX-XXX 3126-XX-XXX lug ront View ia. ±.045 * T-, - and - only. ll dimensions for reference only. pin contacts ¹ socket contacts To complete part number see how to order on page ±.045 TITIO I (), / train elief T06-XX-XXX () 06-XX-XXX () T06-XX-XXX () 3126-XX-XXX 35 lug ide View, / otting oot T06-XX-XXX 06-XX-XXX T06-XX-XXX 3126-XX-XXX lass, / lass (), / lass, /.T * pin contacts ¹ socket contacts ia. ia. pin contacts ¹ socket contacts O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ia.

38 WW T07 (3124) 07 jam nut receptacle / Open Wire eal T07-XX-XXX 07-XX-XXX 3124-XX-XXX To complete part number see how to order on page 39. ll lockwire holes are.044 ia. in. ll dimensions for reference only. TITIO I (), / train elief T07-XX-XXX () 07-XX-XXX () 3124-XX-XXX 36, / otting oot.t O. T07-XX-XXX 07-XX-XXX 3124-XX-XXX O. eceptacle ront View eceptacle ide View ia. lat hell ex anel Thickness Thread ize ±.005 in. lass U U U O. Y.O Y.O Y.O. lass, / lass (), / lass, / hell ize in. ia. ree ia. ia Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

39 WW T degree plug Open Wire eal, () train elief T08-XX-XXX 08-XX-XXX T08-XX-XXX () 08-XX-XXX () To complete part number see how to order on page 39. ll lockwire holes are.044 ia. in. hell ize lug ront View ia. ll dimensions for reference only. ±.031 TITIO I lass, () ± lug ide View T08-XX-XXX 08-XX-XXX ±.025 otting oot 75 degrees.t O. O lass Y.O. ±.015 ± Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

40 WW T- reakaway twist pull plug The T- miniature breakaway connector has the following design features: crimp front release, front removable contacts in spring tower retention system 3 styles available: potted termination, environmental style and environment style with a strain relief instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated intermateable with standard receptacles operating voltage to 900 V () at sea level quick positive bayonet coupling and 5 key/keyway polarization reakaway T- with rimp ontacts, otted Termination XX-( ) XX-( ) art umber* ±.250 art umber* 1 OT IT art umber* I IT hell ize reakaway T- with rimp ontacts, nvironmental with train elief XX-( ) XX-( ) ia ia. ±.016 ia. ±.016 reakaway T- with rimp ontacts, nvironmental XX-( ) XX-( ) ll dimensions for reference only. * ee inish information below to determine prefix 71 or 72 in part number ±.250 OT IT Order by mphenol ropriety number as follows (example part number shown): ±.250 OT IT ±.010 I IT Y U TUT IT.200 ±.031 I I IT 1 rawing above shows standard lanyard length inish 71 designates corrosion resistant olive drab cadmium plate 72 designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr. extended salt spray. 2. onnector Type Identification 4196XX designates T- plug, crimp, potted termination style 2511XX designates T- plug, crimp, environmental with strain relief style 3455XX designates T- plug, crimp, environmental 3. hell ize ee part number columns in chart above for 2 digit number at end that correlates to the shell size. xample: 50 correlates to shell size Insert rrangement umber ee insert availability for iniature reakaway connectors on page 6. The number following the hyphen is the insert arrangement number. 5. ontact Type/lternate Insert otation designates pin, designates socket for normal positioning of inserts. When an in ontacts ocket ontacts alternate position of the insert is required to prevent cross-mating a different letter mphenol quates to mphenol quates to (other than or ) is used. ee page 7 for description of alternate positions; then convert etter letter etter letter to mphenol proprietary coding by the chart at right to complete the part number. W W I X X 38 Y Y 2.T O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. 2

41 WW T-, -, /T- how to order T-, - To more easily illustrate ordering procedure, part number T W() is shown as follows: T W () ee code below: 1. onnector Type T designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with crimp contacts designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with dual mounting holes, and crimp contacts designates electrically non-conductive, hard anodic coated, bayonet lock connector with larger flange and mounting holes for back panel mounting, and crimp contacts T designates plug with grounding fingers 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle* 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 degree plug 3. ervice lasses designates environmental crimp designates potted type crimp oth of the above are mphenol proprietary versions of the I , eries 1 crimp contact connector and offer 15 lbs. contact retention for size 20 contacts; 25 lbs. for size 16 contacts. 4. hell ize 20 designates shell size. hell sizes 8 through 24 available. 5. Insert rrangement efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts designates socket contacts 7. Insert otation efer to page 7. W, X, Y, designate that insert is rotated in its shell from normal position. o letter required for normal (no rotation) position. 8. designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on T ) (005) anodic coating - lumilite (standard on ) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief O o ompliant finish suffix as follow: (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt with strain relief U mphenol / o 2002 / 95 / 39 /T- I , eries 1 To more easily illustrate ordering procedure, part number W is shown as follows: W ee code below: 1. designates ilitary tandard 2. pecification umber 312 designates basic family for I , eries 1 crimp type 3. hell tyle 0 designates wall mounting receptacle 1 designates cable connecting receptacle* 2 designates box mounting receptacle 4 designates jam nut receptacle 6 designates straight plug 7 designates box mounting receptacle with dual mounting holes 8 designates wall mounting receptacle with dual mounting holes 4. ervice lass designates environmental resisting connector designates environmental resisting connector with strain relief designates potted type with potting boot 5. hell ize 20 designates shell size. hell sizes 8 through 24 available 6. Insert rrangement efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 7. ontacts designates pin contacts designates socket contacts 8. Insert otation efer to page 7. W, X, Y, designate that insert is rotated in its shell from the normal position. o letter required for normal (no rotation) position..t O. O Y.O Y.O Y.O. * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug..100y.o. or ordering iniature reakaway T- rimp connectors see pg Y.O. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OW TO O T-, -, /T-

42 WW mphenol T-, - bayonet coupling, crimp termination wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle breakaway twist pull plug 40 mphenol crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by a nylon wafer retention system. The - eries is a modification of the T-, providing special shells with a wide mounting flange for back panel mounting. corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the T-. The - is given a durable nonconductive hard anodic lumilite coating which provides abrasion protection and resistance to corrosion. hell components for these versions are aluminum. The dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. pring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. oth the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. oth pins and sockets are machined form a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. reakaway style plug is available in T- crimp. The T- and - eries are intermateable and intermountable with all existing iniature ylindrical eries connectors except for the threaded coupling eries..t O. O Y.O. efer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with a straight or 90 degree plug. 0Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

43 T-, - ontact ize ilver plated wire per I T-, and - ervice lasses T- and - onnectors are available in the three service classes listed below. Open wire sealing environmental resistant, with a nut and grommet for moisture proofing individual wires. ()train relief clamp environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. Test urrent ontact pecifications aximum illivolt rop Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring. reakaway style - see page 48. rimp Well iameter inimum Well epth ervice ating WW WW ecommended Operating Voltage at ea evel ervice ating Test Voltage (), 60 cps ea evel 50,000 ft. 70,000 ft. 110,000 ft. I 600 1, II 1,000 2, open wire seal.t O. () strain relief O Y.O Y.O. potting boot 00Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. T-, - YOT OUI WIT I OTT

44 WW T00 00 wall mounting receptacle Open Wire eal T00-XX-XXX 00-XX-XXX To complete part number see how to order on page 49. () located within.005 ia. of (T) ll dimensions for reference only. (T) (T) TITIO I () train elief T00-XX-XXX () 00-XX-XXX () 42 T.120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia..t otting oot T00-XX-XXX 00-XX-XXX eceptacle ront View eceptacle ide View lass lass () lass ia. (T) ± hell ia. ia. ize T T.005 T T ia. ia oles O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

45 WW T01 cable connecting receptacle hell ize Open Wire eal T01-XX-XXX 01-XX-XXX ote:this connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page 49. eceptacle ront View ±.016 ll dimensions for reference only. ia ±.016 TITIO I () train elief T01-XX-XXX () 01-XX-XXX () 43 eceptacle ide View otting oot T01-XX-XXX lass lass () lass ia..t O. O ia. ia. ia. in Y.O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ia.

46 WW T02 02 box mounting receptacle To complete part number see how to order on page 49. () located within.005 of (T) ll dimensions for reference only. T ia. 4 oles (T) (T).T T02-XX-XXX 02-XX-XXX T02-XX-XXX 02-XX-XXX O. O. eceptacle ront View eceptacle ide View T ia ia ±.016 ± hell ia. ia. ize T T T.005 T T T O. Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW 44 WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

47 WW T06 06 straight plug hell ize Open Wire eal T06-XX-XXX 06-XX-XXX To complete part number see how to order on page 49. lug ront View ia. ll dimensions for reference only TITIO I () train elief T06-XX-XXX () 06-XX-XXX () 45 lug ide View otting oot T06-XX-XXX 06-XX-XXX lass lass () lass ia..t pin contacts ¹ socket contacts ia. pin contacts ¹ socket contacts ia. pin contacts ¹ socket contacts O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ia.

48 WW T07 07 jam nut receptacle Open Wire eal T07-XX-XXX 07-XX-XXX To complete part number see how to order on page 49. ll lockwire holes are.044 ia. in. ll dimensions for reference only. TITIO I () train elief.t T07-XX-XXX () 07-XX-XXX () 46 otting oot T07-XX-XX 07-XX-XXX eceptacle ront View eceptacle ide View anel Thickness lass lass () lass hell ize ex ±.016 ia lat ±.016 ±.005 in. ia. ia. in. ia O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

49 WW T degree plug TITIO I Open Wire eal, () train elief T08-XX-XXX 08-XX-XXX T08-XX-XXX () 08-XX-XXX () To complete part number see how to order on page 49. ll lockwire holes are.044 ia. in. hell ize lug ront View ia. ll dimensions for reference only. ±.031 lass, () ± lug ide View ±.057 T08-XX-XXX 08-XX-XXX ±.025 otting oot 75.T O. O lass Y.O. ±.015 ± Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

50 WW T- reakaway twist pull plug The T- miniature breakaway connector has the following design features: crimp front release, front removable contacts in nylon wafer retention system 2 styles available: potted termination and environment style with a strain relief instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated intermateable with standard receptacles operating voltage to 900 V () at sea level quick positive bayonet coupling and 5 key/keyway polarization art umber* art umber* hell ize ia. ia. ±.016 ia. ±.016 ll dimensions for reference only. * ee inish information below to determine prefix 71 or 72 in part number. rawing above shows standard lanyard length. ± Order by mphenol ropriety number as follows (example part number shown): reakaway T- with rimp ontacts, otted Termination XX-( ) XX-( ) 1. inish 71 designates corrosion resistant olive drab cadmium plate 72 designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr. extended salt spray. 2. onnector Type Identification 2512XX designates T- plug, crimp, potted termination style 3395XX designates T- plug, crimp, environmental with strain relief style 3. hell ize ee part number columns in chart above for 2 digit number at end that correlates to the shell size. xample: 50 correlates to shell size Insert rrangement umber ee insert availability for iniature reakaway connectors on page 6. The number following the hyphen is the insert arrangement number. 5. ontact Type/lternate Insert otation designates pin, designates socket for normal positioning of inserts. When an alternate position of the insert is required to prevent cross-mating a different letter (other than or ) is used. ee page 7 for description of alternate positions; then convert to mphenol proprietary coding by the chart at right to complete the part number ± OT IT Y U TUT IT.200 ±.031 I I IT.T ± OT IT. O. O. reakaway T- with rimp ontacts, nvironmental with train elief XX-( ) XX-( ).O. Y.O Y.O Y.O in ontacts ocket ontacts mphenol etter quates to letter mphenol etter quates to letter W W I X X Y Y W.100Y.O. W.100Y.O. WWW WW.100Y.O I IT Y.O. WW W W W 0Y.O.

51 WW T-, - how to order T-, - To more easily illustrate ordering procedure, part number T W () is shown as follows: T W () ee code below: 1. onnector Type T designates standard electrically conductive olive drab cadmium plated bayonet lock connector with crimp contacts designates electrically non-conductive, hard anodic coated bayonet lock connector with large flange and mounting holes for back panel mounting, and crimp contacts. 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle* 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 plug 3. ervice lass designates environmental crimp designates potted type crimp oth of the above are mphenol proprietary versions of the I , eries 1 crimp contact connector and offer 7 lbs. contact retention for size 20 contacts; 9 lbs for size 16 contacts. 4. hell ize 20 designates shell size. hell sizes 6 through 24 available. 5. Insert rrangement efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts. designates socket contacts. 7. Insert otation efer to page 7. W, X, Y, designate that insert is rotated in its shell from the normal position. o letter required for normal (no rotation) position. 8. () designates strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on T ) (005) anodic coating - lumilite (standard on ) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt with strain relief.t O. O Y.O Y.O Y.O * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. W.100Y.O. or ordering iniature reakaway T- rimp connectors see page 48. W.100Y.O. WWW 49 WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OW TO O T-, -

52 WW mphenol threaded coupling and solder termination wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle 50 mphenol eries threaded coupling miniature cylindrical connectors incorporate solder contacts. The double stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and disengaging. hell components are aluminum. right cadmium plating to QQ--416 with a clear chromate after-treatment provides a golden colored conductive finish. ingle key/keyway polarization represents maximum simplicity in a design proven in millions of connectors. oth pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. oth the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical insulation of the contacts in the insert. The is intermateable and intermountable within the threaded coupling series..t O. O. efer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug..o and -, which are threaded coupling and incorporate crimp contacts, are briefly covered on pages 62 and 63. It is necessary to contact mphenol for ordering information on these types. Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW W 0Y.O. Y.O. WW W W

53 ontact ize ilver plated wire per I ervice lasses connectors are available in the service classes listed below. ach class except the hermetic seal receptacle has one or more means of terminating or supporting a cable or wire bundle. eneral duty; back shell is threaded for conduit attachment of 3057 cable clamp. () eneral duty; with strain relief clamp for cable or wire bundle support. ressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a temperature range of 65 to +257 in accordance with -1 specification. nvironment resistant; with nut and grommet for moisture proofing individual wires. () nvironment resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring. () train relief clamp suitable for retaining customer applied potting compounds, with provision for wire support. W * Test urrent ontact pecifications aximum illivolt rop older Well iameter older Well epth ervice ating WW WW ecommended Operating Voltage at ea evel ervice ating Test Voltage (), 60 cps ea evel 50,000 ft. 70,000 ft. 110,000 ft. I 600 1, II 1,000 2, ompressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. Telescoping sleeves ( 3420) can be used to adapt to cables smaller than minimum close down. ermetically sealed with compression glass inserts. efer to pages for ermetic Versions within the solder series. 51 general duty.t. () strain relief. O. O. / open wire seal.o. Y.O Y.O. / potting boot 00Y.O W cable seal.100y.o. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. I T OUI WIT O OTT

54 WW wall mounting receptacle eneral uty/ ressurized 00-XX-XXX 00-XX-XXX (), (), () train elief 00-XX-XXX () 00-XX-XXX () To complete part number see how to order on page ±.005 ia. 4 oles TITIO I Open Wire eal.t V.375 I 00-XX-XXX 52 otting oot 00-XX-XXX W able eal 00W-XX-XXX eceptacle eceptacle ide View ront View lass, hell ize ±.005 ±.010 Thread lass Q Thread lass 2 in. V Thread lass U U U U U U U U lass (), (), () lass lass lass W hell ize Thread in. ia. in. losed ree ll dimensions for reference only Q. O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

55 WW cable connecting receptacle eneral uty 01-XX-XXX ecept. ront View eceptacle ide View lass hell ize Thread lass 2 Q Thread lass 2 in. V Thread lass U U U U U U U lass (), (), () lass lass lass W hell ize Thread in. ia. in. losed ree ll dimensions for reference only. V.375 I (), (), () train elief 01-XX-XXX () 01-XX-XXX () 01-XX-XXX () TITIO I Open Wire eal 01-XX-XXX ote: This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. To complete part number see how to order on page Q otting oot 01-XX-XXX W able eal.t W-XX-XXX O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

56 WW box mounting receptacle ll dimensions for reference only..120 ±.005 ia. 4 oles.t XX-XXX * 02-XX-XXX * 02-XX-XXX * 02-XX-XXX. O. To complete part number see how to order on page 61. * The 02 ox ounting eceptacle is made only to complete a series and no provision is made for accessories or potting on the rear skirt. O. eceptacle ront View eceptacle ide View hell ize ±.005 ±.010 Thread lass O. Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW 54 WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

57 WW straight plug eneral uty 06-XX-XXX TITIO I (), (), () train elief Open Wire eal 06-XX-XXX () 06-XX-XXX () 06-XX-XXX () To complete part number see how to order on page XX-XXX 55 otting oot 06-XX-XXX W able eal 06W-XX-XXX lug ront View lug ide View lass hell ize Thread lass 2 Q Thread lass 2 in. V Thread lass U U U U U U U U lass (), (), () lass lass lass W hell ize Thread in. ia. in. losed ree ll dimensions for reference only V.375 I.333 X.T. Q. O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

58 WW 07 jam nut receptacle Open Wire eal 07-XX-XXX To complete part number see how to order on page 61. eceptacle ide View eceptacle ront View lass, hell ex Thread anel Thickness Thread ize ±.010 ±.016 ±.010 lass ±.010 in. lass U U U lass lass (), () lass hell ize Thread ia. in. in ll dimensions for reference only TITIO I (), () train elief 07-XX-XXX () 07-XX-XXX () 56 eneral uty/ ressurized eceptacle 07-XX-XXX 07-XX-XXX.T otting oot XX-XXX O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW W 0Y.O. Y.O. WW W W

59 WW hermetic Three shell styles are available in the hermetic threaded series: I These hermetic connectors are available with solder cup or flat eyelet pin contacts. ocket contacts are available in some versions. Other design characteristics of the hermetic connector series are as follows: hell ize: 6 thru 22. (tin plated) ontact count: 2 through 65. efer to pages 4 and 5 for insert availability for hermetics. urrent: 5.0 amp, each #20 contact; 10 amp, each #16 contact; 17 amp, each #12 contact. ontacts: abricated from high nickel alloy and tin plated. ielectric Withstanding Voltage (sea level): 1500 volts () 60 cps ervice ating I; 2300 volts () 60 cps ervice ating II. ompression glass inserts, permanently lettered. elium eakage: ess than 1.0 X 10-6 cc/sec. at 15 psi differential. hysical hock: 100 s. Vibration: xceeds I rocedure II. Thermal hock: o deterioration or failure after 5 cycles at 55 to efer to pages 4-11 for insert arrangement availability. 57 solder mounting receptacle.t O. O. box mounting receptacle.o. Y.O Y.O Y.O. jam nut receptacle.100y.o W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

60 I hermetic solder mounting receptacle WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. eceptacle ront View ll dimensions for reference only. *I-XX-XXX ** IY-XX-XXX To complete part number see how to order on page 61. * older cup pin contacts without interfacial seal. ** older cup pin contacts with interfacial seal ia. W hell ize ia. Thread lass eceptacle ide View W

61 WW hermetic box mounting receptacle hell ize eceptacle ront View ±.005 ±.010 ll dimensions for reference only. To complete part number see how to order on page 61. * older cup pin contacts without interfacial seal. ** older cup pin contacts with interfacial seal Thread lass ±.005 ia. 4 oles.t. * 02-XX-XXX ** 02Y-XX-XXX. O. O. ± eceptacle ide View.O. Y.O ia T ± Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW T Y.O. WW W W W 0Y.O.

62 07 hermetic jam nut receptacle WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. To complete part number see how to order on page 61. * older cup pin contacts without interfacial seal. ** older cup pin contacts with interfacial seal hell ize eceptacle ront View ex. ±.016 ll dimensions for reference only Thread lass 2 * 07-XX-XXX ** 07Y-XX-XXX ±.020 eceptacle ide View anel Thickness in Thread lass U U U

63 WW how to order To more easily illustrate ordering procedure, part number W () is shown as follows: W () ee code below: 1. onnector Type designates bright cadmium plated with clear chromate after treatment, threaded coupling connector with solder contacts 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle I designates solder-mount receptacle (hermetic only) 3. ervice lass designates general duty back shell designates pressurized receptacle designates environmental resisting open wire seal with grommet and nut designates potted with potting boot W designates clamp assembly for moisture proofing, multijacketed cables designates hermetic* seal (without interfacial seal) Y designates hermetic* seal (with interfacial seal) 4. hell ize 20 designates shell size. hell sizes 6 through 24 available. 5. Insert rrangement efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts. designates socket contacts. 7. Insert otation efer to page 7. W, X, Y, designate that insert is rotated in its shell from the normal position. o letter required for normal (no rotation) position. 8. () designates strain relief clamp. Indicate optional finishes as follows: (001) bright cadmium (standard on ) (003) olive drab cadmium plate (005) anodic coating - lumilite (011) chromate treated (Iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel.t O. O Y.O Y.O Y.O * ermetic connectors are supplied with tin plated shells. This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. W.100Y.O. W.100Y.O. WWW 61 WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OW TO O I

64 WW mphenol -, - threaded coupling and crimp termination mphenol - eries threaded coupling miniature cylindrical connectors incorporate crimp contacts in a spring tower retention system. mphenol - eries threaded coupling miniature cylindrical connectors incorporate crimp contacts in a nylon wafer retention system to maintain contact position. The double stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and disengaging. hell components are aluminum. right cadmium plating to QQ with a clear chromate after-treatment provides a golden colored conductive finish. ingle key/keyway polarization represents maximum simplicity in a design proven in millions of connectors. oth pins and sockets are machined from a copper alloy and are gold plated. This gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. oth the insert and main joint gasket are molded from resilient neoprene. This provides excellent moisture sealing at the gasket and superior electrical insulation of the contacts in the insert. The - and - are only intermateable and intermountable within the threaded coupling series. hell style drawing pages are not shown in this catalog for the - and - styles. If connector drawings are needed please contact mphenol for assistance. hell styles are currently available in these series as follows: 00-, wall mounting receptacle 01-, cable connecting receptacle 02-, box mounting receptacle 06-, straight plug 08-, 90 degree plug 06- straight plug (will mate with - receptacles and solder receptacles) lease contact mphenol for complete information, as there may be limitations in shell sizes within the - and - series. efer to pages 4-11 for insert arrangement availability. * This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug ontact ize ilver plated wire per I and - ervice lasses - and - connectors are available in the three service classes listed below. Open wire sealing - environmental resistant, with a nut and grommet for moisture proofing individual wires ()train relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support Test urrent ontact pecifications aximum illivolt rop rimp Well iameter inimum Well epth ± ± ± ervice ating ecommended Operating Voltage at ea evel ervice ating Test Voltage (), 60 cps.t. ea evel 50,000 ft. 70,000 ft. 110,000 ft. I 600 1, II 1,000 2, O. O Translucent nylon boot for retaining customer applied potting compounds; held in place by a threaded ring Y.O Y.O. open wire seal 00Y.O () strain relief.100y.o. W.100Y.O. potting boot W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

65 WW -, - how to order -, - To more easily illustrate ordering procedure, part number W () is shown as follows: W () ee code below: 1. onnector Type - designates bright cadmium plated with clear chromate after treatment, threaded coupling connector with crimp contacts, incorporating a spring tower retention system - designates bright cadmium plated with clear chromate after treatment, threaded coupkling connector with crimp contacts, incorporating a nylon waftr retention system to maintain contact postion 2. hell tyles - - consult mphenol for availability. 00 designates wall mounting receptacle 01 designates cable connecting receptacle 02 designates box mounting receptacle 06 designates straight plug 08 designates 90 degree plug 2. hell tyle - - consult mphenol for availability. 06 designates straight plug 3. ervice lass designates environmental crimp designates potted type crimp oth of the above are mphenol proprietary versions of the I , eries 1 crimp contact connector and offer 7 lbs. contact retention for size 20 contacts; 9 lbs for size 16 contacts.) 4. hell ize 20 designates shell size. lease contact mphenol for complete information, as there may be limitations in shell sizes with the - and - series. 5. Insert rrangement efer to pages 4-11 for insert availability designates insert arrangement. (The number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts. designates socket contacts. 7. Insert otation efer to page 7. W, X, Y, designate that insert is rotated in its shell from the normal position. o letter required for normal (no rotation) position. 8. () designates strain relief clamp. Indicate optional finishes as follows: (001) bright cadmium (standard on ) (003) olive drab cadmium plate (005) anodic coating - lumilite (011) chromate treated (Iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel.t O. O Y.O Y.O Y.O This connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. W.100Y.O. W.100Y.O. WWW 63 WW.100Y.O. WWW Y.O. WW W W W 0Y.O. -, - T OUI WIT I OTT

66 WW T,, accessories sealing plugs, flange gaskets, potting boots I I U XX XX OUTI T XX XX I 15º 75 OTTI OOT XX.130 I I 6 TO I I I T I U O T,, ontact ize mphenol art umber umber ia. ±.010 ia. ±.005 ±.010 olor ode Yellow lue ed ow to Order: Order by 10- (roprietary) or part number as shown in chart above..t. OUTI T O T,, T, T,, hell ize ±.010 ±.010 ±.010 ± T ± O. O ow to Order: or T, : XX (complete order number with desired shell size). or : XX (complete order number with desired shell size). Y.O Y.O OTTI OOT O T,, 00Y.O. hell ize ±.015 ± Y.O ow to Order: XX (complete order number with desired shell size). W.100Y.O. ll dimensions for reference only. W.100Y.O. WWW 64 WW.100Y.O. WWW W 0Y.O. Y.O. WW W W

67 WW T,, accessories clamps TI I XX & TI I XX XXXX V Thread TI I O T,, hell ize Thread lass 2 in ow to Order: XX X dd desired dd desired finish suffix shell size 1 designates bright cadmium with clear chromate 3 designates olive drab cadmium 5 designates lumilite ot for use with jam nut style connectors..t. & TI I O T,,. hell ize Thread lass 2 in O. O ow to Order: XX X dd desired dd desired finish suffix shell size 1 designates bright cadmium with clear chromate 3 designates olive drab cadmium 5 designates lumilite ot for use with jam nut style connectors. Y.O Y.O. O T,, hell ize mphenol art umber ±.031 ia. in. V Thread / / Y.O ow to Order: Order by XXXX number listed above. tandard finish is olive drab zinc alloy. onsult mphenol, idney, Y for alternate finishes..100y.o. tandard accessory finishes are 1 bright cadmium with clear chromate for types, 3 olive drab cadmium for T and /T types, 5 lumilite for types. lectroless nickel plating is also available on some items; consult mphenol, idney, Y W.100Y.O. ll dimensions for reference only. W.100Y.O. WWW 65 WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OI & TOO

68 WW T,, /T accessories protection caps T OTTIO O T,, /T OTO XXX XXX XXX 3181-XXX (able onnecting 3181-XXX (Wall eceptacle) eceptacle) (am ut eceptacle) U OTTIO O T,, /T OTO 3180-XXX XXX tandard accessory finishes are 1 bright cadmium with clear chromate for types, 3 olive drab cadmium for T and /T types, 5 lumilite for types. lectroless nickel plating is also available on some items; consult mphenol, idney, Y ll dimensions for reference only I X X I O I 24 X X 66 T OTTIO O T,, /T hell ize ia ia ia X td. &,, X only // T I O I 6-22 ow to Order roprietary eceptacle aps: Wall eceptacle aps: able onnecting eceptacle aps: am ut eceptacle aps: dd desired shell size XX X XX X XX X. dd desired finish suffix 1 designates bright cadmium with clear chromate 3 designates olive drab cadmium 5 designates lumilite. roprietary caps are supplied with standard bead chains only (as shown in drawing at left). or other chain options, an version cap should be ordered. O. ow to Order Version eceptacle aps: Wall eceptacle aps: XX - for sash chain - for long sash chain - for rope chain - for long rope chain am ut ecept. aps: XX - for sash chain - for long sash chain hell size O versions are supplied with standard anodize finish only. or other finish options a proprietary cap should be ordered. U OTTIO O T,, /T Y.O. hell ize ia ia X td. &, X only / Y.O Y.O ow to Order roprietary lug aps: XX X dd desired shell size.100y.o. dd desired finish suffix 1 designates bright cadmium with clear chromate 3 designates olive drab cadmium 5 designates lumilite roprietary caps are supplied with standard bead chains only (as shown in drawing at left). or other chain options an version cap should be ordered. W.100Y.O. ow to Order Version lug aps: XX hell size - for sash chain - for long sash chain - for rope chain - for long rope chain W.100Y.O. WWW versions are supplied with standard anodize finish only. or other finish options a proprietary cap should be ordered. WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

69 WW accessories protection caps I X T OTTIO O OTO XXX XXX XXX (Wall eceptacle) (able onnecting (am ut eceptacle) eceptacle) U OTTIO O OTO XXX X X 67 T OTTIO O hell ize Thread lass 2 ia ia X ± T X ow to Order roprietary eceptacle aps for connectors only: Wall eceptacle aps: XX X able onnecting eceptacle aps: XX X am ut eceptacle aps: XX X. dd desired shell size dd desired finish suffix 1 designates bright cadmium with clear chromate (standard for ) 3 designates olive drab cadmium 5 designates lumilite. aps for connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left). O. O. U OTTIO O hell ize Thread lass X ± O. Y.O Y.O Y.O. ow to Order roprietary lug aps for only: XX X dd desired shell size dd desired finish suffix 1 designates bright cadmium with clear chromate (standard for () 3 designates olive drab cadmium 5 designates lumilite.100y.o. aps for connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left)..100y.o. tandard accessory finishes are 1 bright cadmium with clear chromate for types, 3 olive drab cadmium for T and /T types, 5 lumilite for types. lectroless nickel plating is also available on some items; consult mphenol, idney, Y W.100Y.O. ll dimensions for reference only. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

70 WW T,, accessories dummy receptacles, O rings, plastic dust caps ¹ ¹ O T, ¹ UY T O T,, /T OTO 3115-XXX XXX O O I O OTO XX TI UT.150 I O ¹ hell ize lug lastic ust ap eceptacle lastic ust ap O UY T O T,, /T roprietary Version Version hell ize ± ±.005 ± (T) 1 (T) T T ow to Order roprietary ummy eceptacles: 68 dd desired shell size ow to Order Version ummy eceptacles: ow to order O rings: XX X dd desired finish suffix 1 designates bright cadmium with clear chromate 3 designates olive drab cadmium 5 designates lumilite. dd desired shell size O O I O 3115-XX X. dd desired finish suffix - designates lumilite - designates electroless nickel -W designates olive drab cadmium O. O. hell ize mphenol art umber ia. ±.010 T ia. ± O. Y.O. hell ize lug lastic ust ap eceptacle lastic ust ap Order by 10- (roprietary) only as shown in chart above. 0Y.O Y.O. ow to Order lastic ust aps: To the basic order number add the dust cap size to match connector plug or receptacle shell size, as shown in the tables above. xample: would be the correct order number for a plastic dust cap for a T00 receptacle, shell size Y.O ll dimensions for reference only. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

71 WW pplication Tools, The following data includes information pertaining to the application tools for crimping, inserting and removing size 20, 16, and 12 contacts incorporated in mphenol iniature ylindrical onnectors. ll crimping tools included are the full cycling type, and when used as specified by the manufacturer, provide reliable crimped wire to contact termination. Tool frames and turret heads are available from approved tool manufacturers; consult mphenol, idney, Y for listings. ssembly instructions are available online at ee the following: -786 for assembly instructions -658 for assembly instructions -555 for solder type instructions.t. II TOO O T-, -, -, /T- (I , eries 1) onnectors ontact ize Tool art umber Tool rame Turret ead / / / / / /1-02 ITIO/OV TOO O T-, -, -, /T- (I , eries 1) onnectors ontact ize mphenol ontact Insertion liers Insertion Tool mphenol ontact Insertion Tool art umber ontact Insertion Tool O T-, -, - (roprietary) onnectors. ontact ize Tool art umber Tool rame * Use aniels T254 or equivalent 69 Turret ead O /1-01* * /1-01* * O Y.O. mphenol ontact emoval Tool emoval Tool art umber ontact emoval Tool 0Y.O / / / / Y.O / /19-09 O T-, -, - (roprietary) onnectors.100y.o. ontact ize ontact Insertion liers Insertion/emoval Tool.100Y.O. ontact emoval Tool it W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

72 ontacts - ower and Thermocouple rimp for miniature cylindrical connectors The following tables provide part number information for crimp contacts used in mphenol iniature ylindrical onnectors. or additional information, consult mphenol, idney, Y. I OTT for I , eries 1 (T-, -) onnectors ins ockets ontact ize ccommodates Wire ize umber mphenol roprietary umber umber mphenol roprietary umber 20 20, 22 & 24 W 39029/ / , 18 & 20 W 39029/ / & 14 W 39029/ / W W W I OTT for T- (roprietary) onnectors ins ockets ontact ize ccommodates Wire ize mphenol roprietary umber mphenol roprietary umber 20 20, 22 & 24 W W , 18 & 20 W TOOU OTT for iniature onnectors ize 16 rimp Termination 20 rimp Termination 20 older Termination WW WW O. O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. ins roprietary art umber ockets roprietary art umber aterial hromel lumel Iron onstantan hromel lumel Iron onstantan hromel lumel Iron onstantan isted are insertable/removable contacts; however, it is intended that contacts be terminated with solder. or additional thermocouple contact information, consult mphenol, idney, Y. ee -776 for thermocouple contact termination instructions. These are online at or contacts for miniature connectors, see page

73 WW oaxial ontacts for miniature cylindrical connectors mphenol iniature onnectors can incorporate shielded coax contacts. The iniature family is built around I specifications, with ilapproved and proprietary styles offered. ormal operating voltage for iniature cylindricals with power only contacts is up to 1,000 V () at sea level. iniature ylindricals offer these features for contact termination flexibility: everal insert arrangements that can incorporate: ize 8 & 12 rimp oax contacts for rimp type ize 8 & 12 older oax contacts for older type Wide selection of connector shell styles and sizes tandard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release oax contacts are designed to the same high performance standards as power contacts. oax and power contacts may be intermixed with no degradation of connector reliability. o mis-mating or cross-plugging with insert rotation and keyway polarization. OI IOTIO mphenol iniature ylindricals are normally supplied with a full complement of power contacts, separately packaged. oax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. If the application is for coax only, the connector may be ordered less contacts and no power contacts will be supplied. Installation instructions for the coax contacts for iniature onnectors are provided in mphenol documents as follows: -633 for solder type; -613 for type; -660 for type. OW TO O:. elect the coax contacts designed for the cable being used from the applicable charts in this catalog for each iniature type (solder, or ).. elect a connector insert from those shown on pages60-63 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. ote: ize 8 and 12 contacts are used with connector inserts through shell size 18 only. or larger connector shell sizes, use size 8 contacts.. etermine the iniature ylindrical type, shell style, finish, service class and insert rotation required for your application.. onsult mphenol, idney Y with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. 71 older oax ontact for use in iniature older Type onnectors.t in rimp oax ontact for use in iniature rimp Type onnectors O. O ocket rimp oax ontact for use in iniature rimp Type onnectors Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OTT

74 WW oaxial ontacts for miniature cylindrical connectors, cont. mphenol oaxial ontacts designed for use in iniature ylindrical onnectors offer the same durability advantages and design benefits for reliable interconnection as the mphenol coax contacts used in high performance connectors. variety of military and commercial shielded cables are accommodated within the miniature cylindrical series. mphenol supplies coax contacts for solder, crimp and crimp connector styles. Other features of the coax for miniature cylindricals include: iniature coax design has an outside nut within the TYI IITU I OX assembly for fast, reliable assembly of contact to cable. OT OTT has crimp socket outer contact with a solder pin inner contact ll types feature solder style inner contacts and crimp style outer contacts for reliable cable termination iniature coax crimp type contacts are designed for use in iniature crimp series connectors iniature coax solder type contacts are designed for use in iniature solder series connectors. These come pre-installed into the solder connector O. O TYI TI O ize 8 and 12 oax ontacts ontact esistance: 1 mp, 170 millivolts max. voltage mps, 150 millivolts max. voltage 25 ielectric Withstanding Voltage: ize 8: 1,300 V sea level ize 12: 1,000 V sea level ize 8 & 12: 250 V 50,000 ft. Insulation esistance 5,000 megohms 25 Typical VW for size 8 & 12 T- Types II & III only: (z) up to 10 z XTIO O TY IITIO: T- Type I is moisture seal design with internal O-ring. T- Type II is 50 ohm impedance matched version. ontacts terminated to other than 50 ohm cables are therefore not matched. T- Type III is 50 ohm contact, non-serviceable after assembly older and Types are non-impedance matched contacts. OTT II: uffix inish min. silver over copper flash min. gold (noop hardness ) over silver min. gold (noop hardness ) over silver min. gold (noop hardness ) over copper min. gold (noop hardness ) over nickel min. gold (noop hardness 90 max.) over copper min. gold (noop hardness ) over copper min. gold (noop hardness ) over copper 72 TYI IITU I OX I OTT has crimp pin outer contact with a solder socket inner contact Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

75 WW oaxial ontacts for miniature cylindrical connectors, cont. solder (I eries 1 type) - application data able -58/U, -141/U, -303/U -59/U, -62/U, -62/U, -210/U -142/U, Times I /U, -174/U, -179/U, -187/U, -188/U, -316/U O OX OTT or use in iniature older Type onnectors: T,, /T and tyles imensional ata (ee rawings above) ontact art umber ontact ength ef. ize cross ia. ia. lats in ocket ±0.001 ±0.004 in ocket * * * * /U * 8-196/U * /U, -195/U, aychem aychem Thermatics TI I I * * * * ± ± ± ± ± ± ± ± ± ± OT: ontacts can be ordered by part numbers given in chart OT: ize 8 and 12 contacts are used with connector inserts through shell size 18 only. or larger connector shell sizes, use size 8 contacts. OTT II: or all contacts in this series feature minimum gold (noop hardness ). OT I 73 I-T-22910/7-1 Tool Use with ie art umber /7-15 () rimp errule Tools I /5-01 Tool Use with ie art umber 22520/5-05 () 22520/5-41 () I /10-01 Tool Use with ie art umber etainer ut Wrench 22520/10-07 () /7-18 () 22520/5-45 () /7-16 () 22520/5-43 () /7-12 () /7-11 () /7-11 () /7-15 () /7-15 () 22520/5-03 () 22520/5-08 () 22520/5-35 () 22520/5-03 () 22520/5-33 () 22520/5-03 () 22520/5-33 () 22520/5-05 () 22520/5-41 () 22520/5-05 () 22520/5-41 () TI I I.T OT: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other O. O Y.O /10-05 () Y.O /10-05 () Y.O /10-05 () Y.O /10-07 () /10-07 () Y.O /7-13 () 22520/5-37 () * onsult mphenol, idney Y for availability II TOO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimension may be used and only mate with each other W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

76 WW oaxial ontacts for miniature cylindrical connectors, cont. crimp (I eries 1 type) - application data able I OX OTT or use in iniature rimp Type onnectors: T-, -, /T- and - tyles imensional ata (ee rawings above) ontact art umber inish rimp errule Tools on Type ontact ating (ee ength ef. ize arts g. 23) cross (ee ia. I-T-22910/7-1 I /5-01 I /10-0 ia. lats in ocket g. 23) ±0.001 Tool Tool Tool ±0.004 in ocket Use with ie art Use with ie art Use with ie art umber umber umber -55/U, -142/U, -142/U, * /U ( )* ( )* ( )* ( )* /U, * /U, * * -303/U ( )* ( ) ( )* ( )* -59/U, -62/U, -62/U, -210/U -140/U, -302/U I II I II I II I II I II I II II * II ( )* ( ) 8 II ** * * 8 II * * 8 II ( )* ( )* 8 II ** /U, -174/U, ( )* ( )* -179/U, ( )* ( )* -187/U, /U, /U * * * -178/U, -196/U ( )* ( ) ( )* ( )* I II I II I II I II I II I II I I ( )* ( )* 8 I ** * * * * * ( )* ( )* ( )* ( )* I II I II I II 2 4 ** 2 4 ** 2 4 ** 2 4 ** 2 4 ** ± ± ± ± ± ± ± ± OT: ontacts can be ordered by part numbers given in chart ** ee finish options for crimp iniature contacts listed on page 70. eplace the parenthesis of the contact part number with the finish suffix number. owever, you should consult mphenol idney Y regarding the availability of all finish choices for each part OT TI I I 74 etainer ut Wrench Installation Tools Insertion emoval 22520/5-05 () /7-17 () 22520/10-07 () /5-19 () /5-05 () /7-15 () 22520/10-07 () /5-41 () /7-18 () 22520/5-45 () /5-05 () /7-17 () 22520/10-07 () /5-19 () /5-03 () 22910/7-12 () 22520/5-08 () 22520/10-05 () 22520/5-35 () TI I I OT: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other..t O. O Y.O Y.O Y.O Y.O /5-03 () /7-11 () 22520/10-05 () 22520/5-33 () W.100Y.O. W.100Y.O. WWW I * onsult mphenol, idney Y for availability II TOO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimension may be used WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

77 WW oaxial ontacts for miniature cylindrical connectors, cont. crimp (I eries 1 type) - application data, cont. able -180/U, -195/U I OX OTT or use in iniature rimp Type onnectors: T-, -, /T- and - tyles imensional ata ontact art umber inish (ee rawings pg. 25) rimp errule Tools on Type ontact ating (ee ength ef. ize arts g. 23) cross (ee ia. I-T-22910/7-1 I /5-01 I /10-0 ia. lats in ocket g. 23) ±0.001 Tool Tool Tool ±0.004 in ocket Use with ie art Use with ie art Use with ie art umber umber umber * * * * ( )* ( )* ( )* ( )* aychem , ( ) ( ) -180/U, 12 III ** -195/U * * * * -188 or * * * * ouble raid ( )* ( )* ( )* ( )* Thermax I II I II I II I II I II I II II * * 8 II ( )* ( )* 8 II ** I ouble raid * * 8 I ( )* ( )* 8 I ** /U, * * aychem ( )* ( )* ( )* ( )* I 2 aychem I ( )* ( )* 8 I ** II 2 aychem * * 8 II ( )* ( )* 8 II ** * II 2 aychem * * 8 II * ( )* 8 II ** Westrex , Tensolite II II /87T ( )* ( )* 12 II ** I II I II I II 2 4 ** 2 4 ** 2 4 ** ± ± ± ± ± ± ± ± ± OT: ontacts can be ordered by part numbers given in chart ** ee finish options for crimp iniature contacts listed on page 70. eplace the parenthesis of the contact part number with the finish suffix number. owever, you should consult mphenol, idney, Y regarding the availability of all finish choices for each part number. 75 etainer ut Wrench Installation Tools Insertion emoval 22520/5-05 () /7-15 () 22520/10-07 () /5-41 () OT: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other..t. aniels 200 Tool with 2330 or 22520/31-01 Tool with ositioner 22520/ /7-13 () 22520/5-37 () O O /7-16 () 22520/5-43 () O. Y.O /5-05 () /7-15 () 22520/10-07 () /5-41 () Y.O /5-05 () /7-15 () 22520/10-07 () /5-41 () Y.O /5-03 () /7-12 () 22520/5-08 () 22520/10-05 () /5-35 ().100Y.O /5-03 () /7-11 () 22520/10-05 () /5-33 () Y.O. * onsult mphenol, idney Y for availability II TOO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimension may be used. W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.

78 WW oaxial ontacts for miniature cylindrical connectors, cont. crimp (I eries 1 type) - application data able -58/U, -141/U, -303/U -178/U, -196/U OT TI I I I OX OTT or use in iniature rimp Type onnectors: T-, - and - tyles imensional ata (ee rawings above) ontact art umber ontact ength ef. ize cross ia. ia. lats in ocket ± ±0.001 ±0.004 in ocket 76 I-T-22910/7-1 Tool Use with ie art umber /7-15 () /7-11 () OT: ontacts can be ordered by part numbers given in chart * onsult mphenol, idney Y for availability OTT II: for all contacts in this series feature minimum gold (noop hardness ). II TOO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimension may be used. TI I I OT: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other..t. rimp errule Tools I /5-01 Tool Use with ie art umber 22520/5-01 () 22520/5-41 () 22520/5-03 () 22520/5-33 () I I /10-01 Tool Use with ie art umber etainer ut Wrench Installation Tools. Insertion 22520/10-07 () O /10-05 () O Y.O Y.O Y.O W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W emoval W 0Y.O.

79 WW ounting ecommendations for miniature cylindrical connectors OUT OTO ll flange mounting and T connectors use standard mounting dimensions. They cannot be back panel mounted due to coupling clearance. The T (thru-bulkhead) type connector must also be back panel mounted on one side. lange gaskets are available for both series, see page 64. hell ize (T) ia. & T & T UT OUTI The jam nut design has become very popular because it allows bench wiring of harness assemblies. The labor saving often offsets the added cost of the jam nut receptacle which is due to the self contained O ring and the extra nut. The series mounts in a round hole and can be pinned to prevent rotation. The T series mounts in a mounting hole and does not require pinning. hell ize ±.010 anel Thickness in TI T OUTI This series must be mounted in such a way as to preserve the hermetic seal provided by the glass insert. ounting data for box and jam nut receptacles is given above. ut-out required for solder mounting receptacles () is given below. hell ize The finish of each of these hermetic receptacles is fused electro-deposited tin for easy solderability, and protected by a special lacquer for optimum shelf life. The lacquer will not interfere with any soldering operation. ow temperature solder should be used and the addition of a solder fillet at arrow points on drawing at right is recommended. are must be taken that the operating temperature of the final assembly does not rise above the melt UT-OUT O T OY 2 UT-OUT (T) ia. OUT OTO UT-OUT UT OUTI I OTIO O OY TI T O T 4 O.120 ia. for hell izes 6-22 & T.147 ia. for ize 24 T.150 ia. for only UT T (ee dimensions above) TIO o. 4 crew for & T o. 6 crew for and for ize 24 T.T O. O Y.O Y.O Y.O W.100Y.O. TIO OX T (ee dimensions above) W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O. OTO OUTI OTIO

80 WW Other mphenol iniature ylindrical onnectors I , eries 2 I , eries 2 connectors are provided with the mphenol /atrix family of miniature cylindricals These are bayonet coupling type, and they feature crimp contacts that are rear insertable and rear releasable. There are six shell styles available and 34 insert arrangements. ilitary part numbers of the atrix I family include the following: 3470 wall mounting receptacle with narrow flange 3472 wall mounting receptacle with wide flange 3471 cable connecting receptacle 3474 jam nut receptacle 3476 straight plug 3475 plug with I grounding fingers ee catalog for more information..t eophysical iniature ylindricals esigned for the eophysical industry s rugged environments, the mphenol eophysical eries connector has custom features that provide reliability in extreme temperature and moisture conditions. The unique shell design provides stronger shells along with an anodized (nonconductive) finish for greater salt, corrosion and abrasion resistance. oupling nuts are manufactured with round detent holes and are sold separately for greater customer flexibility. ee product data sheet #146. ield ayonet I ylindricals mphenol division provides I bayonet coupling cylindrical connectors with an 45 thernet interface*. These are designed for use in all levels of harsh environments from industrial to mil-aero applications providing I67 protection from dust, fluids, vibration, shock and traction. The mphenol ield allows the use of thernet lass /at 5 and at 5e connections for 10 aset, 100 ase TX, or 1000 aset networks. It works with any standard 45 cordset with no extra tooling. It also offers reinforced I protection. or more information go online to or ask for the ield eries brochure. * Other ield eries products are available through mphenol. These include TV within I-T eries III threaded coupling connectors, and 544 within T push-pull plastic shell coupling. 78 I eries 2 O. O Y.O. eophysical iniature ylindricals 0Y.O Y.O ield ayonet I ylindricals W.100Y.O. W.100Y.O. WWW WW.100Y.O. WWW Y.O. WW W W W 0Y.O.