ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1

Size: px

Start display at page:

Download "ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1"

Ronald Davis
5 years ago
Views:

1 Characteristics brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number of phases [Us] rated supply voltage Network type Communication interface Length Winding type Electrical connection Holding brake Gear box type Oct 2, 2018 Lexium integrated drive Motion integrated drive ILE Brushless dc motor Single phase 24 V 48 V DC Integrated Ethernet/IP 174 mm Medium speed of rotation and medium torque Industrial connector Without Reduction ratio 18:1 (160:9) Nominal speed Nominal torque Complementary Transmission rate Mounting support Motor flange size Number of motor stacks 1 Centring collar diameter Centring collar depth Straight teeth gear, 3 stages 225 rpm at 24 V 281 rpm at 48 V 3.5 N.m at 48 V 3.5 N.m at 24 V 125, 250, 500 kbauds Flange 66 mm 16 mm 4 mm 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Number of mounting holes 4 Mounting holes diameter Circle diameter of the mounting holes Feedback type Shaft end Second shaft Shaft diameter Shaft length Key width Supply voltage limits Current consumption Associated fuse rating Commissioning interface Input/Output type Voltage state 0 guaranteed Voltage state 1 guaranteed Discrete input current Discrete output voltage Maximum switching current Protection type Supply current Nominal output power Peak stall torque Continuous stall torque Detent torque Speed feedback resolution Accuracy error 4.4 mm mm BLDC encoder Keyed Without second shaft end 10 mm 25 mm 16 mm V 7000 ma (peak) 5500 ma (maximum continuous) 16 A RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) 4 signals (each be used as input or output) V V <= 10 ma at 24 V on/sto_a for safety input <= 3 ma at 24 V on/sto_b for safety input 2 ma at 24 V for 24 V signal interface V 100 ma per output 200 ma total Overload of output voltage Safe torque off Short circuit of the output voltage Supply: 0.1 A, power stage disabled Supply: 3.8 A, 48 V Supply: 6.8 A, 24 V 119 W at 48 V 95 W at 24 V 6.19 N.m at 48 V 6.19 N.m at 24 V 4.3 N.m 1.42 N.m (gearbox output) 12 points/turn (motor) +/- 0.5 point Torsional backlash <= 1 Rotor inertia Maximum mechanical speed Maximum radial force Fr Maximum axial force Fa Service life in hours Marking Type of cooling Product weight 48 kg.cm² 281 rpm 200 N (long-term operation) 200 N (short-term operation) 10 N (long-term operation) 80 N (short-term operation) 2500 h of bearing : (short-term operation) h of bearing : (long-term operation) CE Natural convection 1.85 kg Environment Standards EN EN :2001, second environment EN : EN/IEC EN/IEC IEC

3 Product certifications Ambient air temperature for operation Permissible ambient air temperature around the device IEC , Ed 2 CUL TÜV UL Ambient air temperature for storage C Operating altitude Relative humidity C without derating > C with power derating of 2 % per C 105 C (power amplifier) 110 C (motor) <= 1000 m without derating % without condensation Vibration resistance 20 m/s² (f = Hz) for 10 cycles conforming to EN/IEC Shock resistance 150 m/s² for 1000 shocks conforming to EN/IEC IP degree of protection IP41 shaft bushing conforming to EN/IEC IP54 total except shaft bushing conforming to EN/IEC Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available Product environmental Available End of life manual Contractual warranty Warranty period 18 months 3

4 Dimensions Drawings Integrated Drive with Straight Teeth Gear Dimensions 1 Accessories: I/O signal insert with industrial connectors 2 Option: industrial connectors 3 Earth (ground) terminal 4 Accessories: cable entries Ø = mm/ in. 4

5 Connections and Schema Connection Example with 4 I/O Signals 5

6 Performance Curves Torque Characteristics X1 Speed of rotation of motor in rpm X2 Speed of rotation of gearing in rpm Y Torque in Nm 1.1 Max. torque at 24 V 1.2 Max. torque at 36 V 6

ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1

ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1 Characteristics brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 54:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1540.00 USD Main Range of