Enhanced Management Frame (EMF)

Size: px
Start display at page:

Download "Enhanced Management Frame (EMF)"

Transcription

1 features and benefits Individual 12-fiber modules Integrated splice capability Modules extend/retract independently Top and rear strain-relief Reduced fiber routing density Improved density Maximize scalability and modularity Enables on-frame splicing without sacrificing density when using standard EMF modules Minimizes connector disturbance Ensures bend-radius control Reduce fiber trough build by 91% when using EMF- MTP Housings Increased density with EMF-Pretium EDGE Housings and modules with LC Connectors - 2,304 fiber terminations Enhanced Management Frame Photo FOH003 The Enhanced Management Frame (EMF) is designed for FTTx, cross-connect and interconnect applications. The integrated modular design allows growth and expansion of a fiber management system one frame, one module and one fiber termination at a time. User-friendly features such as single jumper length, in-bay jumper storage, transparent modules and multiple inter-bay routing options make this frame an ideal solution for both FTTx deployments and traditional cross-connect and interconnect applications. The EMF utilizes a single 12-fiber module that may be configured with splitters/couplers and wavelength division multiplexers (WDMs) that support today s FTTx passive optical networks. Other module options include pigtailed, stubbed, empty and with adapters only. Each module extends and retracts independently from the frame for minimal adjacent connector disturbance and a quiet-front appearance. Splicing facilities within the module maintain the maximum 1728-fiber terminations with SC and LC connectors. By splicing off the frame and specifying EMF-Pretium EDGE housings/modules and LC connectors, frame density increases to 2,304 fiber terminations. Integrated fiber management within modules will store 3 m of buffer tube or ribbon slack and 1 m of 900 µm pigtail slack. Factory-stubbed termination modules and housings are available for both the left and right side of the frame. By specifying the EMF-MTP housings on the left and right side of the EMF frame, the quantity of individual fiber jumpers can be reduced from 1,728 to 144 with 12-fiber MTP module stubs. PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 1

2 Inter-bay jumper slack storage enables the use of a single jumper length, minimizing the variation of jumper length. Staggered side-mounted routing guides on the module housings allow clean fiber management and control pathways for front-to-rear jumper routing. There is full bend-radius control throughout the frame with top and rear strain-relief. Open Top for Easy Interconnection Routing Full Radius Control for Minimum-Bend- Radius Protection Throughout Frame Top Cable Strain-Relief Integrated IBU for Single- Jumper-Length Slack Storage Optional Full-Length Rear Troughing System Wide Fiber Routing Area with Separate Routing Zones Protective Lower Fiber Cover Enhanced Management Frame Photo FOH004 SPECIFICATION SHEET EVO-278-EN PAGE 2

3 Transparent Module for Easy Internal Inspection EMF Module Photo FOH032 Staggered Side-Routing Guides Prevent Jumper Stack-Up EMF Housing Photo FOH035 Individual 12-Fiber Access from Sliding Module Front-Loading Housing; Six 12-Fiber Modules in each Housing Terminate 72 Fibers Module Handle Folds Down for Enhanced Connector Access Full Radius Control EMF Housing with Pretium EDGE Module Photo LAN2325 PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 3

4 EMF - Pretium EDGE Housing EMF- Pretium EDGE Left-Hand Module EMF- Pretium EDGE Right-Hand Module *Note: For adapter part numbers, see page 6. Left Module (Top View) Drawing ZA-926 EMF-Pretium EDGE Housing Drawing ZA Left Modules and 6 Right Modules per Housing 72 Left Modules and 72 Right Modules per Frame Left Module (Bottom View) Drawing ZA-931 Modules per Housing and Frame Drawing ZA-921 SPECIFICATION SHEET EVO-278-EN PAGE 4

5 Housings and Modules Housings and modules for the EMF are available in four configurations: Empty Loaded with adapter modules Pigtailed Stubbed Housings and modules for the EMF-Pretium EDGE are available in two configurations: Empty Loaded with modules specifications Adapter Capacity EMF Module, 12-Fiber Photo FOH011 Adapter Terminations Terminations Terminations Type per Module per Housing per Frame SC ,728 LC ,728 FC ,728 LC ,304 ordering information Housings Empty CCF-CML-072 CCF-CMR-072 CCF-CML CCF-CMR CCF-CML-96EDGE CCF-CMR-96EDGE Empty Left EMF Housing; holds 6 EMF modules Empty Right EMF Housing; holds 6 EMF modules Empty Left-Hand Housing with MTP option, holds 6 EMF modules Empty Right-Hand Housing with MTP option, holds 6 EMF modules Dimensions (H x W x D) cm (in) x x (5.5 x 8.6 x 11.75) x x (5.5 x 8.6 x 11.75) Empty Left EMF-Pretium EDGE Housing, holds 8 Pretium EDGE modules Empty Right EMF-Pretium EDGE Housing, holds 8 Pretium EDGE modules PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 5

6 ordering information (continued) Housings Loaded with Modules and Adapters Dimensions (H x W x D) cm (in) CCF - CML Left EMF Housing with adapters and modules installed x x (5.5 x 8.6 x 11.75) CCF - CMR Right EMF Housing with adapters and modules installed x x (5.5 x 8.6 x 11.75) 1 Select number of fibers requiring adapters. 00 = Empty module = 1-12 adapters 2 Select adapter code. Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled Multimode 39 = SC A7 = LC duplex Notes: 1) Maximum SC adapter capacity is 12 per module. 2) Maximum LC adapter capacity is 6 duplex per module. Example CCF-CML-726C Left EMF Housing loaded with modules, 72 SC APC adapters installed Single Adapter Only s ADP-SC00-CCGDF-CLS ADP-SC00-CCNDF-CLS ADP-DLC0-CCGRC-CLS ADP-DLC0-CCNRC-CLS ADP-FC00-MMXTH-NLS Adapter, SC APC simplex with mounting clip Adapter, SC UPC simplex with mounting clip Adapter, LC APC duplex, reduced flange, integral clip Adapter, LC UPC duplex, reduced flange, integral clip Adapter, FC UPC, threaded flange SPECIFICATION SHEET EVO-278-EN PAGE 6

7 ordering information (continued) 1 Modules Loaded with Adapters CCML - 1 EMF - MTP Modules CCML1203 CCMR CCMR Select number of fibers requiring adapters. 00 = Empty module = 1-12 adapters Example CCML12-6C CCMR06-B3 CCMR00-A7 2 Select adapter code. Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled - MT00C - MT00B Note: Stubbed or pigtailed housings are available separately in a wide array of configurations. Each complete housing can accommodate up to six modules. Stubbed or pigtailed modules are also available separately in the same array of configurations. Individual modules can be easily loaded into unused positions within a previously installed housing. Contact your Corning Cable Systems Customer Service Representative for module and housing ordering information at or internationally at Left Module with adapters installed; specify adapter provision type from charts below Right Module with adapters installed; specify adapter provision type from charts below Multimode 39 = SC A7 = LC duplex Left-Hand EMF 12-Port Module with MTP Cable Assembly Right-Hand EMF 12-Port Module with MTP Cable Assembly EMF module Photo FOH356 Left EMF Module with 12 SC APC adapters installed Right EMF Module with 6 LC APC adapters installed Dimensions (H x W x D) cm (in) 2.24 x x (0.9 x 8.6 x 11.75) 2.24 x x (0.9 x 8.6 x 11.75) Right EMF Module - Empty (no adapters) - LC type mountings installed for future adapters. 1 Notes: 1) Maximum SC adapter capacity is 12 per module. 2) Maximum LC adapter capacity is 6 duplex per module. Select adapter code. Single-Mode Multimode 3C = SC ultra 39 = SC 6C = SC angled A7 = LC duplex A9 = LC duplex ultra B3 = LC duplex angled EMF frame Photo FOH364 PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 7

8 ordering information (continued) Housing and Modules with Pigtails M Select hardware type. CC = Pigtailed housing CM = Pigtailed module 2 Select hardware mounting side. R = Right L = Left 3 Select total fiber count = Enter number Example: 6 fibers = fibers = fibers = 72 See Note 1. Select fiber count of each module Example: 6 fibers = fibers = 12 5 Select connector type. Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled Multimode 39 = SC 17 = FC A7 = LC duplex Select mode of operation. R = Single-mode K = Multimode 62.5/125 µm T = Multimode 50/125 µm 7 Select pigtail type. J = Ribbon H = MIC 900 µm buffered fiber Select jumper tracing option. - = No jumper tracing S = SearchLite Tracing System (SC UPC only) Notes: 1) Housings are shipped individually with a maximum fiber count of 72. 2) Pigtailed modules ship with both Q-Pak and heat-shrink holders. Example CCL72M12-3C-1RJ-0 CMR12M12-6C-1RH-0 Pigtailed Left-Hand EMF Housing, total fiber count is 72 fibers using 12-fibers per module, connectors are SC UPC, pigtail type is a 1 m single-mode ribbon Pigtailed Right-Hand EMF Module, 12-fibers, connectors are SC APC, pigtail type is 1 m MIC 900 µm buffered fiber SPECIFICATION SHEET EVO-278-EN PAGE 8

9 ordering information (continued) Pretium EDGE Modules 1 ECM - M Select polarity type. U = Universal S = Straight-through See Note 1. 2 Select LC Duplex adapters on front of modules. 04 = Single-mode OS2 05 = Multimode OM3/OM Select Pinned MTP on rear of module. 93 = Multimode OM3/OM4 89 = Single-mode OS2 4 Select fiber type. R = OS2 T = OM3 Q = OM4 Note: 1) Universal polarity accounts for 1 send and 1 receive fiber per pair so fiber 1 (send) will come out on fiber 2 (receive) on other end. Straight-through polarity is most often used with SM fiber using two different wavelengths for send and receive. Pretium EDGE Module with VFL-Compatible Photo LAN1545 PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 9

10 ordering information (continued) Housing and Modules with Stubbed Cable Select hardware type. CCF = 72-fiber EMF housing CCM = 12-fiber EMF module 2-9 Select hardware mounting side. R/B = Right-side housing with cable entry at top right L/C = Left-side housing with cable entry at top left 3 Select total fiber count = Enter number E4 = 144 fibers Example: 12 fibers = fibers = E4 See Note 1. Select cable length in meters = Enter number 99+ = Enter alphanumeric code from Table A 5 Select connector type. Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled Multimode 39 = SC A7 = LC duplex 6 Select fiber type. - = Single-mode K = Multimode 62.5/125 µm T = Multimode 50 CC Select cable type. 900 µm Coated Fiber Cables 81 = MIC Riser Indoor Cable with TBII Buffered Fiber 88 = MIC Plenum Cable with Flexible TBII Buffered Fiber 250 µm Coated Fiber Loose Tube Cables (2-144 fibers) W4 = ALTOS All-Dielectric Outside Plant Cable W5 = ALTOS Single-Armored Outside Plant Cable W6 = ALTOS Double-Armored Outside Plant Cable W7 = ALTOS Riser Cable WZ = ALTOS LSZH Cable WF = FREEDM Indoor/ Outdoor Cable Ribbon Fiber Cables ( fibers) C4 = SST-Ribbon All-Dielectric Outside Plant Cable C5 = SST-Ribbon Single- Armored Outside Plant Cable C6 = SST-Ribbon Double- Armored Outside Plant Cable C7 = Ribbon riser cable CF = FREEDM Ribbon Riser Indoor/Outdoor Cable Select special options. 00 = Standard configuration SL = SearchLite Tracing System (SC UPC only) 9 See selection block 2. Note: 1) One housing shipped for 1-72 fibers. Two housings shipped for 144 fibers. 2) Not all part number configurations are available. Please confirm availability with a Corning Cable Systems Customer Service Representative. Example CCFL7231-3C-C7SL1C Left-Hand 72-Fiber Stubbed EMF Housing with 31 m of single-mode ribbon riser cable attached and terminated with SC UPC connectors featuring SearchLite Tracing System adapters; cable enters from the top SPECIFICATION SHEET EVO-278-EN PAGE 10

11 ordering information (continued) 1 EMF-MTP Housings CCML CCMR Select adapter code. Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled MT89C - MT89B Note: 1) Maximum number of SC adapters per module is 12, per housing is 72 (72 fibers). Maximum number of LC adapters per module is 6 duplex, per housing is 36 (72 fibers) Table A: Codes for Fiber Counts and Cable Stub Lengths Over 99 A _ = 10_ M_ = 21_ B _ = 11_ N _ = 22_ C _ = 12_ P _ = 23_ D _ = 13_ Q _ = 24_ E _ = 14_ R _ = 25_ F _ = 15_ S _ = 26_ G _ = 16_ T _ = 27_ H _ = 17_ U _ = 28_ J _ = 18_ V _ = 29_ K _ = 19_ W_ = 30_ L _ = 20_ Examples: E4 = 144 fiber A5 = 105 m Left-Hand EMF 72-Port Housing with MTP Cable Assembly Right-Hand EMF 72-Port Housing with MTP Cable Assembly Notes: 1) I and O are not used. 2) Lengths from 100 to 339, use single letter plus number (1 to 9). 3) Lengths over 339 m can be ordered only in 10 m increments. Table B: Standard Cable Types for Stubbed Hardware X _ = 31_ AH = 410 Y _ = 32_ AJ = 420 Z _ = 33_ AK = 430 AA = 340 AL = 440 AB = 350 AM = 450 AC = 360 AN = 460 AD = 370 AP = 470 AE = 380 AQ = 480 AF = 390 AR = 490 AG = 400 AS = 500 Cable Type Code Fiber Count Fiber Type C4 SST-Ribbon Dielectric Outdoor Cable Single-mode C7 Ribbon riser indoor cable Single-mode W4 ALTOS All-Dielectric Outside Plant Cable Single-mode CF FREEDM Ribbon Riser Indoor/Outdoor Cable Single-mode WF FREEDM Indoor/Outdoor Cable Single-mode W7 ALTOS Riser Cable Single-mode Note: Max cable size for EMF housings is 144 fibers. PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 11

12 Network Bay Frame 4.5 ft EMF Extension Kit (CCF-FRAME-EXT-7-11) Drawing ZA-3598 ZA-3 EMF Frame (CCF-FRAME-7) Drawing ZA-3599 ZA-35 ordering information Empty Frame CCF-FRAME-7 CCF-FRAME-EXT-7-8 CCF-FRAME-EXT-7-9 CCF-FRAME-EXT-7-11 CCF-BAY-7 CCF-JT-REAR QFMABK1A CCF-PAD-KIT 7-ft EMF Frame Mounts 12 LH and 12 RH housings 1-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 8 ft high 2-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 9 ft high 4.5-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 11.5 ft high 7-ft EMF Frame with 12 rear troughs attached Individual Rear Trough for EMF Zone 4 Mounting Bolt Kit Isolation Pad Kit for EMF frame (includes mounting hardware) Dimensions (H x W x D) cm (in) x 86.4 x (84 x 34 x 17) 30.5 x 86.4 x 43.2 (12 x 34 x 17) 61 x 86.4 x 43.2 (24 x 34 x 17) x 86.4 x 43.2 (54 x 34 x 17) x 86.4 x 43.2 (84 x 34 x 17) 5.08 x 86.4 x 14.2 (2 x 34 x 5.6) N/A 86.4 x (34 x 17) SPECIFICATION SHEET EVO-278-EN PAGE 12

13 ordering information (continued) Strain-Relief Components for Front Strain-Relief A A A A A A CCF-LRG-CAB-BKT A A Cable Strain-Relief Grip Cable Strain-Relief Grip Cable Strain-Relief Grip Cable Strain-Relief Grip Cable Strain-Relief Grip Cable Strain-Relief Grip Large Cable Strain-Relief Bracket, for cable dimensions above 0.81-in. Includes 1 bracket and all supporting hardware Cable Clamp Assemblies, hold up to 3 cables; order strain-relief grips separately Cable Bonding Kit; includes four 14-in ground wire assemblies, one 4-position ground bar and hardware to bond cables to frame ground Notes: 1) Strain-relief components not required when using housings. 2) Each EMF Frame ships with 12 cable clamp assemblies. Strain-relief grips are sold separately. n Relief Bracket Cable Strain-Relief Grip (see note 2) Clamps EMF Cable Clamp Assemblies Drawing ZA-3291 Dimensions of Cable Opening (Diameter) cm (in) 8 (0.32) 1.05 (0.40) 1.3 (0.50) 1.6 (0.63) 1.75 (0.70) 2.05 (0.80) 2.06 (0.81) N/A N/A Large Cable Strain-Relief Bracket (CCF-LRG-CAB-BKT) Drawing ZA-3600 ZA PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 13

14 Front-Mounting Workshelf EMF front-mounting workshelf provides a convenient workspace for craft persons. The shelf is capable of supporting up to 50 lbs. EMF Workshelf Photo FOH026 ordering information CCF-SHELF P Front-Mounting EMF Workshelf EMF Service Module Bracket Dimensions (H x W x D) cm (in) 36.2 x 85 x 38 (14.25 x 33.5 x 15) 3.0 x 6.0 x 12.0 (7.6 x 15.2 x 30.5) SPECIFICATION SHEET EVO-278-EN PAGE 14

15 EMF Optical Components The EMF FTTx splitter module allows for deployment of passive optical network (PON) architecture with the optical splitter in a central office frame. It is available in dual 1x16 or 1x32. Available only in LC APC and LC UPC. The EMF course wavelength division multiplexing (CWDM) modules are available in SC APC and SC UPC. EMF splitter modules occupy two positions inside the EMF housings; CWDM modules occupy one position. The modules are designed to meet applicable sections of Telcordia GR-1209-Core and GR-1221-Core. ordering information MLS1AAB30B MRS1AAB30B MLS1AAB30B MRS1AAB30B MRC1AA3C03C01ZZZ MRC1AA6C06C01ZZZ MRC1AA3C03C01XXX MRC1AA6C06C01XXX EMF 1x32 Splitter Module Drawing ZA-3329 EMF Left-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters EMF Right-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters EMF Left-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters EMF Right-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters EMF CWDM Demultiplexing Right-Hand Module; 9 IN, 1 OUT; SC UPC EMF CWDM Demultiplexing Right-Hand Module; 9 IN, 1 OUT; SC APC EMF CWDM Multiplexing Right-Hand Module; 1 IN, 9 OUT; SC UPC EMF CWDM Multiplexing Right-Hand Module; 1 IN, 9 OUT; SC APC Jumpers 2.0 mm jumpers recommended length within frame is 5.5 m. See EVO-29-EN for ordering information. See SRP for additional jumper recommendations. Example R M SC-SC single-fiber, 2.0 mm jacketed cable assembly PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 15

16 Inter-Bay Distribution (IBD) EMF inter-bay distributors are designed to be placed between two EMFs and are used to store and manage jumper slack. They each require a 5-in gap between frames for mounting. End Cap and Door Cover EMF end caps protect the end of a bay line-up while providing a clean, finished appearance. A dual door front cover provides individual access to the left or right column of termination housings. EMF Inter-Bay Dual Storage Unit (IBD) Drawing ZA-3246 EMF End Cap Drawing ZA-3250 EMF Dual-Door Front Cover Drawing ZA-3251 ordering information CCF-IBD-T3 CCF-IBD-EC-7 CCF-COVER-7 CCF-COVER-2-7 CCF-EC-7 CCF-IBD-PAD-KIT IBD designed exclusively for use with the EMF; features left-to-right fiber routing, internal slack storage and front-to-rear feed through Contains the CCF-EC-7 end cap to create a single kit for ending a bay line-up with slack storage and end protection Simple One-Piece Decorative Lift-Off Front Panel Cover for the front of the EMF Dual-Door Lift-Off Front Cover Panels for the EMF, provides individual access to the left or right column of termination housings Decorative End Cap for protecting the end of a bay line-up Isolation Pad for EMF IBD (mounting hardware not required) Dimensions (H x W x D) cm (in) x 12.7 x 30 (84 x 5 x 12) x 12.7 x 30 (84 x 5 x 12) 206 x 86.4 x 2.54 (81 x 34 x 1) 206 x 86.4 x 2.54 (81 x 34 x 1) x 38.1 x 2.54 (84 x 15 x 1) 40.3 x 19.8 (15.9 x 7.9) SPECIFICATION SHEET EVO-278-EN PAGE 16

17 A Corning Transitional Inter-Bay Managers TRAINING Enhanced Management Frame (EMF) COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT There is a series of transitional inter-bay managers designed to route fiber from the existing FiberManager System (FMS) line-ups into new enhanced management frame (EMF) line-ups when the two frame systems are placed side by side. Each transition bay option is distinguished by its relation to the EMF frame and the relative positions of the EMF and FMS frames to each other. Illustrations, application descriptions and part numbers are shown below. Transitional Interbay Managers (IBU) HARDWARE Transitional Interbay Managers (IBU) CCF-IBU-FMS-C and CCF-IBU-FMS-C-JT CCF-IBU-FMS-7-R CCF-IBU-FMS-7-LF CCF-IBU-FMS-C CCF-IBU-FMS-7-RF CCF-IBU-FMS-7-L and CCF-IBU-FMS-7-R CCF-IBU-FMS-7-L Drawing ZA-2629 CCF-IBU-FMS-7-R CCF-IBU-FMS-7-L CCF-IBU-FMS-7-LF and CCF-IBU-FMS-7-RF CCF-IBU-FMS-7-LF Drawing ZA-2629 CCF-IBU-FMS-7-R CCF-IBU-FMS-7-RF CCF-IBU-FMS-7-LF CCF-IBU-FMS-7-RF PRETERMINATED SYSTEMS CABLES CONNECTORS - CABLE ASSEMBLIES Drawing ZA-2629 CCF-IBU-FMS- S-7-L Transitional Interbay Managers (IBU) SPECIFICATION SHEET EVO-278-EN PAGE 17

18 ordering information CCF-IBU-FMS-7-L CCF-IBU-FMS-7-R CCF-IBU-FMS-7-LF CCF-IBU-FMS-7-RF CCF-IBU-FMS-C CCF-IBU-FMS-C-JT IBU that feeds fiber from an FMS to an EMF positioned on the left; hardware order looking from the front and left to right is EMF-IBU-FMS; suitable only for EMF and FMS frames positioned with flush rear-most surfaces IBU feeds fiber from an FMS to an EMF positioned on the right; hardware order looking from the front and left to right is FMS-IBU-EMF; suitable only for EMF and FMS frames positioned with flush rear-most surfaces. IBU that feeds fiber from an FMS to an EMF positioned on the left; hardware order looking from the front and left to right is EMF-IBU-FMS; suitable only for EMF and FMS frames positioned with flush front-most surfaces IBU feeds fiber from an FMS to an EMF positioned on the right; hardware order looking from the front and left to right is FMS-IBU-EMF; suitable only for EMF and FMS frames positioned with flush front-most surfaces Center IBU for use with an FMS positioned directly between two EMF frames; two IBUs shipped per kit Rear Troughs for use with the CCF-IBU-FMS; troughs span the rear of the FMS frame Dimensions (H x W x D) cm (in) 84 x 12 x 5 (213.4 x 30 x 12.7) 84 x 12 x 5 (213.4 x 30 x 12.7) 84 x 12 x 5 (213.4 x 30 x 12.7) 84 x 12 x 5 (213.4 x 30 x 12.7) 84 x 12 x 5 (213.4 x 30 x 12.7) 84 x 12 x 5 (213.4 x 30 x 12.7) SPECIFICATION SHEET EVO-278-EN PAGE 18

19 EMF to UDF Transition Corning Cable Systems EMF to UDF Integration System provides a unique solution that enables the mounting of traditional optical hardware and electronics right next to the modular EMF frame. Unlike any other solution in the industry, this system provides preengineered front to rear and lateral fiber management pathways between a modular style high-density frame and traditional 19- or 23-in frames without requiring costly overhead raceways. specifications Trough to be Used on UDF Center Rear Trough Right Rear Trough Left Rear Trough ordering information Transition Equipment CCF-JT-UDF-CR CCF-JT-UDF-RR CCF-JT-UDF-LR CCF-IBD-UDF-7 Frame and IBD Unit Arrangement Standard IBD #12-24 Thread Cutting Screws Custom IBD Center Rear Trough Right Rear Trough Troughs Between Custom IBD and Standard IBD Units Drawing ZA-3601 UDF is between two custom IBD units UDF is to right of EMF when viewed from front and UDF has no IBD or has a standard IBD on its right side UDF is to left of EMF when viewed from front and UDF has no IBD or has a standard IBD on its left side Individual Jumper Trough, EMF-UDF, center, rear trough, platinum Individual Jumper Trough, EMF-UDF, right, rear trough, platinum Individual Jumper Trough, EMF-UDF, left, rear trough, platinum IBU, transition, EMF-UDF, platinum PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 19

20 Frame Components Equipment Racks The backbone of each distribution bay is its equipment rack. Standard 58.4 cm (23 in) equipment racks are available in 2.1 m (7-ft) heights. 2.7 m (9-ft) and 3.5 m (11.5-ft) heights are achieved using 2-ft and 4.5-ft extensions. Rack styles feature industry-standard EIA hole spacing. 2-ft extension 4.5-ft extension 7-ft UDF frame ZA-1628 UDF Equipment Rack and Extensions Drawing ZA-1628 ordering information Dimensions (H x W x D) cm (in) Shipping Weight kg (lb) Equipment Racks UDF-ERO-23E UDF-ERO-19E ft Unequal Flange Equipment Rack, 23-in, platinum 7-ft Unequal Flange Equipment Rack, 19-in, platinum x 65.8 x 25.7 (84.0 x 25.9 x 10.1) x 55.6 x 25.7 (84.0 x 21.9 x 10.1) 22.6 (50) 22.6 (50) Extensions UDF-EXT-23E ft Rack Extension for use with UDF rack (23-in), platinum 60.9 x 65.8 x 25.7 (24 x 25.9 x 10.1) 9.1 (20) UDF-EXT-19E ft Rack Extension for use with UDF rack (19-in), platinum 60.9 x 55.6 x 24.4 (24 x 21.9 x 9.6) 8.2 (18.1) UDF-EXT-23E ft Rack Extension for use with UDF rack (23-in), platinum 137 x 65.8 x 25.7 (54 x 25.9 x 10.1) 15 (33.1) UDF-EXT-19E ft Rack Extension for use with UDF rack (19-in), platinum 137 x 55.6 x 24.2 (54 x 21.9 x 9.6) 14 (31) SPECIFICATION SHEET EVO-278-EN PAGE 20

21 Frame Components End Caps End caps provide protection for the end of each row of bays. End caps are not required between the racks in a given row (must be ordered separately). Foot Caps Foot caps are a protective covering at the base of the rack that allow mounting of A/C outlets that are required in the frame system. Inter-Bay Storage Units Inter-bay storage units (IBUs) route and manage jumpers on the front of the UDF. The IBUs have nine routing hubs, a top jumper trough bridge and a bottom jumper trough. ordering information End Caps UDF-ECO UDF-EC-EXT-7/9 UDF-EC-EXT-7/11 Inter-Bay Storage Units UDF-IBU-7-1 End Cap for 7-ft unequal flange rack (UDF) 2-ft End Cap Extension for unequal flange rack (UDF) 4.5-ft End Cap Extension for unequal flange rack (UDF) Inter-Bay Storage Unit with jumper trough, UDF, single sided End Cap (UDF-ECO ) Drawing ZA-1266 Dimensions (H x W x D) cm (in) x 7.6 x 30.5 (83.6 x 3.0 x 12.0) 60.9 x 7.6 x 30.5 (24.0 x 3.0 x 12.0) x 7.6 x 30.5 (54.0 x 3.0 x 12.0) x 12.1 x 15.2 (84.0 x 4.75 x 6.0) Inter-bay Storage Unit (UDF- IBU-7-1) Drawing ZA-1653 Shipping Weight kg (lb) 15.9 (35.0) 4.5 (10.0) 10.2 (22.5) 9.1 (20.0) PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 21

22 Frame Components Jumper Troughs and Jumper Trough Bridges Jumper troughs organize and protect jumpers routed on the front of the frame and also allow jumper routing from one side of the rack to the other. Jumper troughs are also used for express routing of jumpers through the bay to adjacent bays and are available in a variety of sizes. Jumper trough bridges provide increased support between bays. UDF Standard Upper Trough Drawing ZA UDF Standard Trough Drawing ZA-2848 ordering information Dimensions (H x W x D) cm (in) Jumper Troughs and Jumper Trough Bridges UDF-JT-23T UDF-JT-19T UDF-JT-23B UDF-JT-19B UDF Upper Trough for 23-in, platinum UDF Upper Trough for 19-in, platinum UDF Standard Trough for 23-in, platinum UDF Standard Trough for 19-in, platinum 10 x 65.5 x 12.7 (3.97 x x 5.00) 10 x 55.4 x 12.7 (3.97 x x 5.00) 10 x 65.5 x 12.7 (3.47 x x 5.00) 10 x 55.4 x 12.7 (3.47 x x 5.00) SPECIFICATION SHEET EVO-278-EN PAGE 22

23 installation information For further details on how to install Corning Cable Systems Enhanced Management Frame (EMF) products, please refer to the following Corning Cable Systems recommended procedures: SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP SRP Enhanced Management Frame (EMF) Frame Installation EMF Housing Installation Guide, Jumper Management and Mainenance EMF Jumper Routing Procedures EMF Accessories IBU Bridging EMF and Fiber Manager Frame CCF Frame Extensions for EMF End Cap for EMF End Guard for EMF EMF Door Installation Installation for Inter-Bay Storage Unit - EMF to UDF EMF Trough Edge Guard Installation EMF WATERFALL Installation EMF Rear Trough Retainer Kit Installation EMF CWDM/MUX & DEMUX Module Installation EMF Housings with MTP Connectors PRETERMINATED SYSTEMS CABLES CONNECTORS CABLE ASSEMBLIES HARDWARE COPPER CONNECTIVITY SPLICE AND TEST EQUIPMENT TRAINING SPECIFICATION SHEET EVO-278-EN PAGE 23

24 notes Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. ALTOS, FREEDM, MIC, Pretium EDGE, SearchLite and TBII are registered trademarks of Corning Cable System Brands, Inc. FiberManager, LSZH and SST-Ribbon are trademarks of Corning Cable Systems Brands, Inc. Corning is a registered trademark of Corning Incorporated. MTP is a registered trademark of USConec, Ltd. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. 2009, 2012 Corning Cable Systems. All rights reserved. Published in the USA.. EVO-278-EN / March 2012 SPECIFICATION SHEET EVO-278-EN PAGE 24

Plug & Play AnyLAN Systems

Plug & Play AnyLAN Systems features and benefits Factory-terminated cables Watertight components with compact, rugged design Multi-fiber quick connect Factory tested Modular SPECIFICATION SHEET LAN-731-EN PAGE 1 Install with no

More information

Centrix System. Features and Benefits

Centrix System. Features and Benefits Features and Benefits Supports 4,320 LC or 2,880 SC ports per cabinet Saves space through increased port density Available in front access, cabinet or open frame configuration Allows for back-to-back frame

More information

Verizon FTTP Tool Kits and Accessories An Evolant Solutions Product

Verizon FTTP Tool Kits and Accessories An Evolant Solutions Product Universal Access Tool (UAT3) Splits buffer tubes on single buffer tube ribbon fiber cables (SST-Ribbon and SST-UltraRibbon cables) and high-fiber-count ribbon cables with loose tube architectures such

More information

Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies

Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Combining 40+ years of experience from its founding members, Clearfield designs and manufactures fiber optic cable assemblies for virtually

More information

Fiber Cables & Hardware

Fiber Cables & Hardware Fiber Cables & Hardware Quiktron has been the premier manufacturer of high performance fiber optic cables since 1994. Whether you are looking for standard or custom fiber cables, Quiktron can provide the

More information

MIC Unitized Plenum Cables, Fibers

MIC Unitized Plenum Cables, Fibers MIC Unitized Plenum Cables, 36-144 s Features and Benefits Six- or 12-fiber jacketed subunits Quick and easy identification 900 µm TBII Buffered s Easy, consistent stripping All-dielectric cable construction

More information

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features

SPEC SHEET. OmniReach FTTX Solutions. NEMA Fiber Demarcation Box (FDB) Features ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,

More information

Mining and Petrochemical Tray-Rated Fiber Optic Cables

Mining and Petrochemical Tray-Rated Fiber Optic Cables Features and Benefits Loose tube construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation Extra tough double jackets

More information

Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity

Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility

More information

Fiber Connector Shelf (CCS)

Fiber Connector Shelf (CCS) Corning Cable Systems Standard Recommended Procedure (SRP) 003-595 Issue 3, May 2007 Page 1 of 6 Fiber Connector Shelf (CCS) Table of Contents 1. General... 1 2. Precautions... 1 3. Components... 2 4.

More information

MIC Plenum Cables, 2-24 Fibers

MIC Plenum Cables, 2-24 Fibers Features and Benefits 900 µm Buffered Fibers Easy, consistent stripping All-dielectric cable construction Requires no grounding or bonding Flame-retardant jacket Rugged and durable Standards Listings National

More information

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB)

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB) 1. Precautions 2. Carton Contents Pretium Wall-Mountable Housing OR Fiber Zone Box (FZB-02P-JB) PWH-02P and FZB-02B-JP have: (15 inches) edge grommet (1) Laser warning label (2) Fiber identification labels

More information

fiber optic cable Outdoor Cables

fiber optic cable Outdoor Cables fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial

More information

LX2 High Density LGX 4U Patch Panel

LX2 High Density LGX 4U Patch Panel LX2 High Density LGX 4U Patch Panel An innovative 4U, 19 and 23 rack mountable patch panel, designed for use in high density applications. It offers management of up to 288 fibres using MTP optical cassettes

More information

LX2 High Density LGX 4U Patch Panel

LX2 High Density LGX 4U Patch Panel LX2 High Density LGX 4U Patch Panel An innovative 4U, 19 and 23 rack mountable patch panel, designed for use in high density applications. It offers management of up to 288 fibres using MTP optical cassettes

More information

8400 Series Fiber Distribution System

8400 Series Fiber Distribution System 8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable

More information

OFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION

OFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION OFS 400A FIBER OPTIC INTERCONNECT 636-299-109-01 Instruction Sheet UNIT (FOIU) Comcode 846 586 212 INSTALLATION This instruction sheet covers the 400A1 (106266901) and 400A2 (106414170) Fiber Optic Interconnect

More information

IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM

IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM F 19 Rack Exchange & Shelf Unit IBER DISTRIBUTION FRAME (FDF) FOR EXCHANGE SIZE 900MM x 2200MM x 300 MM 1. General : 1.1 This specification covers the requirements of the fiber distribution frame (FDF)

More information

LGX Frame Fiber Management System

LGX Frame Fiber Management System Page 1 LGX Fiber Optic Distributing Frame Suited for High-Density Applications Today, more than ever, your network must be able to support a growing number of fiber applications. Are your fiber optic circuits

More information

S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC)

S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) 1. General : 1.1 This specification covers the requirements of the standard patch cord and pigtail to be supplied to TOT Public Company Limited

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...

More information

Swing-Out Style Fiber Distribution Units

Swing-Out Style Fiber Distribution Units Fiber Distribution Multilink in-rack mounted termination enclosures are designed to provide connectivity and distribution solutions. Enclosures are supplied with universal mounting hardware for 19 or 23

More information

Fiber Splice Panel Rack Mount User Manual

Fiber Splice Panel Rack Mount User Manual Fiber Splice Panel Rack Mount User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Admonishments... 2 1. DESCRIPTION... 2 A. Product Definition

More information

ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm)

ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm) ...... ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm) Optical Fibers Water Blocking Binders... Ripcord Jacket (polyethylene) Draka Optical Cable... Central Strength Member Flexible Buffer

More information

SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions

SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions Issue 6, June 2014 SYSTIMAX 360 ipatch InstaPATCH Fiber Shelf Instructions General The SYSTIMAX 360 ipatch InstaPATCH fiber shelf is a SYSTIMAX approved product and is available in a sliding configuration

More information

SW1 Swivel 1U Patch Panel

SW1 Swivel 1U Patch Panel SW1 Swivel 1U Patch Panel An innovative 1U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 48 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore

ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the

More information

ExpressLT Dry Dry Loose Tube Cable (2.5 mm)

ExpressLT Dry Dry Loose Tube Cable (2.5 mm) MANUFACTURED IN A versatile, multi-purpose fiber cable designed for ease of use and Buffer Tube Mid-Span Storage applications Overview Prysmian s popular ExpressLT cable combines buffer tubes with enhanced

More information

Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF and ZDF

Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF and ZDF Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF242430 and ZDF242430-6 Table of Contents Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation

More information

SW1 Swivel 3U Patch Panel

SW1 Swivel 3U Patch Panel SW1 Swivel 3U Patch Panel An innovative 3U, 19 and 23 rack mountable swivel patch panel, designed to manage up to 144 fibres. It is compatible with LC, SC and FC adaptor types. This panel can swivel up

More information

SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions

SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions Instruction Sheet 860445121 Issue 2, December 2012 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 High Density Sliding Fiber Shelf Instructions General The SYSTIMAX 360 ipatch G2 High Density Sliding Fiber

More information

ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore

ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the

More information

Fi b e r Op t i c So l u t i o n s

Fi b e r Op t i c So l u t i o n s Fi b e r Op t i c So l u t i o n s Maximize Your Efficiency and Profitability Bulk Fiber Durable Fiber Bulk Fiber Connectors Field Termination Kits Molded & Custom Fiber Assemblies Electronics Using Fiber

More information

COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation

COYOTE 28 GLC (Ground Level Closure) Complete Assembly Installation NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED

More information

ezspan ADSS All-dielectric self-supporting loose tube cable

ezspan ADSS All-dielectric self-supporting loose tube cable All-dielectric self-supporting loose tube cable MANUFACTURED IN Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Material Gel-Filled Buffer Tube Containing

More information

Section 1 COYOTE Closure Series

Section 1 COYOTE Closure Series COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9

More information

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage FIST-GMS2 I N S T A L L A T I O N I N S T R U C T I O N FIST Generic Mixed Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1 Mounting

More information

ipatch Ready Upgrade Kit for SYSTIMAX 360 Fiber Shelves Instructions

ipatch Ready Upgrade Kit for SYSTIMAX 360 Fiber Shelves Instructions Instruction Sheet 860463090 Issue 3, December 2012 SYSTIMAX Solutions ipatch Ready Upgrade Kit for SYSTIMAX 360 Fiber Shelves Instructions General These instructions describe how to install ipatch Ready

More information

MTP Loose Tube Trunk Assemblies. Features. Applications.

MTP Loose Tube Trunk Assemblies. Features. Applications. Loose Tube Trunk Assemblies Up to 144 fibre loose tube optical cable assemblies designed and manufactured for high density applications that require interface. They are available in singlemode (G.652.D,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CABINET MOUNTING HAND-HOLE OR VAULT...3 CABINET MOUNTING

More information

Environmental Distribution Center (EDC-06P-NH)

Environmental Distribution Center (EDC-06P-NH) Corning Cable Systems Standard Recommended Procedure (SRP) 003-545 Issue 4, July 2004 Page 1 of 13 Environmental Distribution Center (EDC-06P-NH) 1.2 To purchase any accessories that are sold separately,

More information

Interconnect Cable Simplex and Duplex

Interconnect Cable Simplex and Duplex 10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed

More information

ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable

ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable ...... ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable Water Blocking Binders... Ripcord Optical Fibers...... Flexible Buffer Tube Jacket (polyethylene) (3.0 mm) Aramid Strength Yarns......

More information

Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions

Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation V00028CA Rev01 Page 1 of 14 Table of Contents

More information

Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable

Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Single-Armored Tight Buffered Tight buffered fibers are positioned in a flexible metal tube, which is filled

More information

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf

More information

This instruction sheet covers the installation of the Fiber Optic 200A Interconnection Unit, which includes LaserWave Applications.

This instruction sheet covers the installation of the Fiber Optic 200A Interconnection Unit, which includes LaserWave Applications. OFS Fiber Optic 200A 636-299-106-13 Instruction Sheet Interconnection Unit Comcode: 846 480 952 Equipment Installation (Includes LaserWave TM Applications) Preface This instruction sheet covers the installation

More information

SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, LC InstaPATCH Distribution Panel Instructions

SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, LC InstaPATCH Distribution Panel Instructions Instruction Sheet 860564707 Issue 2, January 2014 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, LC InstaPATCH Distribution Panel Instructions General The SYSTIMAX 360

More information

2001 PRODUCT CA T ALOG

2001 PRODUCT CA T ALOG 2001 PRODUCT CATALOG 2001 Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized

More information

7 x RJ 45 ports x RJ 45 ports + 1 LC type optic port

7 x RJ 45 ports x RJ 45 ports + 1 LC type optic port configure your LCS 2 system LCS 2 PANELS AND CONNECTOR UNITS (see p. 496, 501, 504) LCS 2 cat. 6 A LCS 2 cat. 6 LCS 2 cat. 5e Patch panels 1U Fitted with 24 connectors High density patch panels Units of

More information

ONTRAC WIRE MESH CABLE TRAY SYSTEM

ONTRAC WIRE MESH CABLE TRAY SYSTEM P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network

More information

P R O D U C T C AT A L O G T ALOG

P R O D U C T C AT A L O G T ALOG 2 0 0 2 2002 PRODUCT CATALOG Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized

More information

Tender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read

Tender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read Tender for procurement of Passive Components of LAN & Wi-Fi and their installation Corrigenda Sl. No. Annexure/Clause For Read Item Specifications Item Specifications 1. Annexure-I, Point No. 1.3 24 Port

More information

1.866.TRY.GLCC WeRackYourWorld.com

1.866.TRY.GLCC WeRackYourWorld.com 1.866.TRY.GLCC WeRackYourWorld.com reat Lakes Cable Management Solutions provide data center managers with a number of enclosure and rack options to support large networks of switches, servers, and patch

More information

Section 1 COYOTE Closure Series

Section 1 COYOTE Closure Series COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE LCC (Low Count Closure)...-4 COYOTE Aerial Drop Closure...-5 COYOTE In-Line RUNT...-6

More information

FiberGuide Fibre Management Systems

FiberGuide Fibre Management Systems FiberGuide Fibre Management Systems Table of Contents Introduction...................................................................... 1 Features and Benefits..............................................................

More information

Data Center Solutions Entrance Facility Main Distribution Area Horizontal and Equipment Distribution Areas. 1st Edition

Data Center Solutions Entrance Facility Main Distribution Area Horizontal and Equipment Distribution Areas. 1st Edition Data Center Solutions Entrance Facility Main Distribution Area Horizontal and Equipment Distribution Areas 1st Edition Data Center Solutions Entrance Facility Main Distribution Area Horizontal and Equipment

More information

Volition Fiber Optic Cable

Volition Fiber Optic Cable Volition Fiber Optic Cable The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125 µm single-mode fiber. The horizontal cable

More information

Multilink s Family of Wall Mount Enclosures

Multilink s Family of Wall Mount Enclosures Multilink s Family of Wall Mount Enclosures The Multilink family of wall mounted optical termination enclosures are designed to provide solutions for both the interconnection of patch cabling and a combination

More information

FIBER CONNECTOR SAFETY WARNINGS

FIBER CONNECTOR SAFETY WARNINGS FIBER CONNECTOR SAFETY WARNINGS SAFETY INFORMATION 1. Always wear safety glasses. 2. Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at least

More information

Laser Optimized Multimode

Laser Optimized Multimode Solution Laser Optimized Multimode 1 Fiber optic LIU/489 FIU 2 Racks and cabinets 3 Equipment room: -600 G2 modular shelf and panel shelf -1000 G2 modular shelf and panel shelf 4 Telecom closet: -600 G2

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CABINET MOUNTING HAND-HOLE OR VAULT...3 CABINET MOUNTING

More information

Mini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.

Mini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide. Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required

More information

SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, MPO Distribution Panel Instructions

SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, MPO Distribution Panel Instructions Instruction Sheet 860564699 Issue 2, January 2014 SYSTIMAX Solutions SYSTIMAX 360 ipatch G2 Fiber Ultra High Density (UHD) Shelf, MPO Distribution Panel Instructions General The SYSTIMAX 360 fiber optic

More information

3000SC Fiber Optic Splice Closure

3000SC Fiber Optic Splice Closure 3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic

More information

FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails

FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails FIST-GSS2 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1

More information

Volition. Fiber Optic Cable. 3Innovation

Volition. Fiber Optic Cable. 3Innovation Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm

More information

LSW Connector Module User Manual

LSW Connector Module User Manual LSW Connector Module User Manual Content Page INTRODUCTION............................................................................. 2 Revision History........................................................................

More information

Opticom Rack Mount Fiber Enclosures

Opticom Rack Mount Fiber Enclosures Opticom Rack Mount Fiber Enclosures Part Numbers: FRME1U, FRME2U Panduit Corp. 2011 INSTALLATION INSTRUCTIONS FRME1U FRME2U Contents - (#) indicates FRME2U quantity 1 - ENCLOSURE 2 - MOUNTING BRACKETS

More information

OFS Fitel LST1U-072/7 and LSTLW Instruction Sheet (LaserWave) Fiber Optic Comcode: Termination Shelf Installation

OFS Fitel LST1U-072/7 and LSTLW Instruction Sheet (LaserWave) Fiber Optic Comcode: Termination Shelf Installation OFS Fitel LST1U-072/7 and LSTLW 636-299-103-5 Instruction Sheet (LaserWave) Fiber Optic Comcode: 845 866 409 Termination Shelf Installation Preface This instruction sheet covers the installation of the

More information

SYSTIMAX G2 4U Fixed Rear Access Combination Shelf Instructions

SYSTIMAX G2 4U Fixed Rear Access Combination Shelf Instructions Instruction Sheet 860452176 SYSTIMAX Solutions SYSTIMAX 360 360G2 4U Fixed Rear Access Combination Shelf Instructions General The SYSTIMAX 360 360G2 4U rear access fiber optic combination shelf mounts

More information

Opti-Guard Splice Enclosure

Opti-Guard Splice Enclosure Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible

More information

GORHINO.COM

GORHINO.COM GORHINO.COM 888-427-4466 GORHINO.COM 888-427-4466 O HINO 016 NEW FOR TRUCKS: BR5 BUMPERS RB10 DROP STEPS SRM ROOF RACKS SPORT BAR 2.0 LIGHTED BED RAILS R5 BR5 FRONT BUMPER REPLACEMENT NOW FOR HALF-TON

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CLOSURE MOUNTING...3 LOCK AND UNLOCK EXTERIOR DOOR...3 CABLE

More information

Instruction, EDGE8-04U Quick Start Guide

Instruction, EDGE8-04U Quick Start Guide EDGE8 Solution 003-1002-BEN, Issue 2 related literature 003-997-QSG-AEN 003-998-QSG-AEN 003-1000-QSG-AEN 003-1001-QSG-AEN EDGE8-01U_NAFTA_AEN EDGE8-01U-SP_NAFTA-AEN EDGE8-02U_NAFTA_AEN EDGE8-04U_NAFTA_AEN

More information

Fast Standard Control Installation Manual FT4

Fast Standard Control Installation Manual FT4 FT4 Fast Standard Control Installation Manual Printed in Canada Copyright 2015 by NORAC Systems International Inc. Reorder P/N: UC4.5-BC-FT4-INST Rev A (Fast - Standard Control) NOTICE: NORAC Systems International

More information

Instructions for Use - Opt-X 1000i Enclosure

Instructions for Use - Opt-X 1000i Enclosure 5R1UM-F03, 5R1UM-S03, 5R2UM-F06, 5R2UM-S06, 5R3UM-F09, 5R3UM-F12, 5R4UM-F12, 5R4UM-F15 Instructions for Use - Opt-X 1000i Enclosure 5R1UM-*03 5R2UM-*06 5R3UM-F** 5R4UM-F** Page 1 of 8 Leviton Network Solutions,

More information

FIBER INSIDE PLANT. Rack Mount Panels Optical Modules Cable Assemblies Components

FIBER INSIDE PLANT. Rack Mount Panels Optical Modules Cable Assemblies Components FIBER INSIDE PLANT Rack Mount Panels Optical Modules Cable Assemblies Components Table of Contents Components Fast Connectors... 2 Fast Connector Tool Kit... 3 Field Master Connectors... 4 FuseConnect

More information

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440)

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440) COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly

More information

Motive Cable Management System

Motive Cable Management System Protecting your technology investment. Motive Cable Management System Motive Vertical is a highly configurable and advanced cable management solution that provides unlimited adjustment anywhere within

More information

LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly

LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly LC Cable Assemblies Product Facts For high performance applications/high density 125 µm Ceramic Ferrule Technology Small size 1/2 size of standard SC and FC products Singlemode and multimode Tuned singlemode

More information

Section 1 COYOTE Closure Series

Section 1 COYOTE Closure Series COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE GLC (Ground Level Closure)...-4 COYOTE Dome Closure...-9 COYOTE In-Line RUNT...-0

More information

FAST-SC Connector. Any questions should be directed to AFL Telecommunications.

FAST-SC Connector. Any questions should be directed to AFL Telecommunications. FAST-SC Connector This technical report demonstrates the reliability of the FAST-SC connector in meeting mechanical and environmental performance criteria. Testing was conducted on mm and sm varieties

More information

LightLink Fiber Optic Splice Trays

LightLink Fiber Optic Splice Trays LightLink Fiber Optic Splice Trays AFL s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config

More information

Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket

Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket Application Specification 402-1012 February 28, 2017 Rev B Fiber Optic Breakout Cables Optical Fiber Aramid Yarns 2mm Subunit Jacket Strength Rods 2 Fiber Cable Outer Jacket 12 Fiber Cable Description:

More information

COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14

COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14 COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures

More information

Long Span ADSS All-dielectric self-supporting loose tube cable

Long Span ADSS All-dielectric self-supporting loose tube cable Long ADSS l-dielectric self-supporting loose tube cable MANUFACTURED IN HDPE Outer Jacket Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Tube Gel-Filled

More information

COYOTE Dome Cross-Connect Closure 6-1/2" x 22"

COYOTE Dome Cross-Connect Closure 6-1/2 x 22 FEBRUARY 2015 COYOTE Dome Cross-Connect Closure 6-1/2" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.

More information

Instructions for Use - Opt-X Ultra Enclosure Directives Enceintes Opt-X Ultra MC Instrucciones de Uso Caja Opt-X Ultra MR

Instructions for Use - Opt-X Ultra Enclosure Directives Enceintes Opt-X Ultra MC Instrucciones de Uso Caja Opt-X Ultra MR 5R1UH-S03 5R2UH-S06 5R4UH-S12 Instructions for Use - Opt-X Ultra Enclosure Directives Enceintes Opt-X Ultra MC Instrucciones de Uso Caja Opt-X Ultra MR 5R1UH-S03 5R2UH-S06 5R4UH-S12 Page 1 of 26 Leviton

More information

Detailed Specifications & Technical Data

Detailed Specifications & Technical Data For more information please call 1-800-Belden1 See Put-ups and Colors Description: FiberExpress Patch Panels in rack and wall mount with Splice Tray and SUITABLE APPLICATIONS: Suitable Applications OUTLET

More information

MPO MicroCable Trunk Assembly

MPO MicroCable Trunk Assembly Product updated on June 04, 2018 Trunk Assembly Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation

More information

Features: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application.

Features: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application. FIBERLIGN Organizers For s (Protected and ) and Mechanical s FIBERLIGN Fiber Optic Organizers are designed to help organize, secure, support and protect delicate optical fibers before, during and after

More information

FTTH ACCESS SOLUTION

FTTH ACCESS SOLUTION QUICKDR@W FTTH ACCESS SOLUTION QUICKDR@W The fastest, easiest solution for customer network connection Creating a network that can manage future demands and take rollout problems in its stride can be a

More information

Singlemode Fused Coupler LGX Module (832 Series)

Singlemode Fused Coupler LGX Module (832 Series) Features and Benefits Wideband and Dual Window Options Standard LGX Configurations High Stability & Reliability Rated for Outdoor Use Corning offers a full line of high performance coupler LGX modules.

More information

19 floor rack with steel door

19 floor rack with steel door 2015 Telecommunication rack systems HETEL 1 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth

More information

WAVETRAX USER MANUAL

WAVETRAX USER MANUAL WAVETRAX USER MANUAL 107719-2A0 WAVETRAX User Manual Document Number 107719-1A0 Copyright 2001, Telect, Inc., All Rights Reserved. Telect and Connecting the Future are registered trademarks of Telect,

More information

Fiber optic splice closure

Fiber optic splice closure FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories

More information

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2 COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly

More information

CommScope MULTILAYERED 289-TYPE INSTALLATION INSTRUCTIONS

CommScope MULTILAYERED 289-TYPE INSTALLATION INSTRUCTIONS CommScope MULTILAYERED 289-TYPE 63-460-32-03 BUILDING ENTRANCE PROTECTOR (BEP) Issue 5, February 2004 Material ID 847 364 882 INSTALLATION INSTRUCTIONS General This instruction sheet provides procedures

More information

FTTH simplex indoor cables with semi-tight tube

FTTH simplex indoor cables with semi-tight tube FTTH simplex indoor cables with semi-tight tube Design Cable design Strain relief Jacket material Jacket colour 1 semi-tight tube Aramide yarn LSFH white Properties Metal free indoor cable Strain relief

More information