Polishing and grinding equipment

Size: px
Start display at page:

Download "Polishing and grinding equipment"

Transcription

1 Polishing and grinding equipment Product Guide Serving Industry with Dependable Grinding & Polishing Machinery For Over 60 years Stephen Bader Co., Inc. Box 297, 10 Charles Street, Valley Falls, New York Telephone: (518) Fax: (518)

2 Guard removed to show machine detail Always wear eye, hearing and appropriate body protection. Bader Space Saver The Bader Space Saver is the most versatile belt grinding and polishing machine on the market. It's patented tracking system accurately tracks belts from 1/8" to 3" wide over soft buff or conventional rubber contact wheels. Shaped or flat faced contact wheels from 1/2 to 18" O.D. may be used interchangeably with a constant belt speed and 132" belt length. The entire machine will pivot on its base to raise or lower the contact wheel to the optimum sitting or standing work height. Drive pulleys are available from stock to yield any desired belt speed from 1500 to 9000 SFPM. The rear mounted motor and recessed base leave the top, bottom and sides free of the obstructions common to typical backstand machines. The standard accessory arms shown on page 3 and the centerless attachments on page 4 indicate some of the variations available which may be added at any time. A mere change of contact wheel and/or accessory will, for instance, convert the unit from a machine highly suitable for hogging excess metal from cast or forged parts to one designed for the close tolerance final shaping and finishing of parts such as jet blades, surgical instruments or hand tools. Standard machines are powered by a 2 or a 5 HP 3ph 3450 RPM TEFC motor. Variable speed with E-stop and brake, and single phase single speed motors are commonly selected options. Special machines and accessories for use with belts up to 6" wide and motors up to IS HP are also available. Optional equipment in addition to the items shown include variable speed with E-stop and brake, air tensioning, work rest tables, and idler pulley tracking. Opdonal Space Saver Set Ups and Accessories Belt guard required by OSHA- supplied with machine. Eye, hearing and appropriate body protection must also be worn. Optional hinged angle plate permits user to lay machine on side for polishing long parts which are cumbersome and fatiguing to handle vertically. Lock-in fork and bearing hub are required for this set up. Space Saver Accessory Arms for Polishing or Stock Removal in Hard to Reach Areas. Mobile Grinder 5 HP Space Saver for heavy weld, billet, and plate grinding and polishing. Depth guide wheels are standard. Hanger bracket is available for use as a swing frame. BJ Arm curved with Billy roll. BJ Arm straight BJY Arm All above arms use BJ wheels with 3/8-24 male thread on spindle.available 9/16" to 5" O.D. 1/4" to I" wide.arm may be mounted in heel as shown or in center hole of standard fork. A maximum belt speed of 3000 SFPM is suggested for wheels under 3" 0.0. to prolong wheel life and maximize operator control. Drive pulleys to yield belt speeds from 1500 to 9000 SFPM available from stock.

3 Always wear eye, hearing and appropriate body protection. Space Saver Accessory Arms (can't> HDBJ Y Arm with V-Belt Support V-Belt gives support to abrasive belt for aggressive slack belt grinding and polishing. Sheaves are mounted on heavy duty BJ hubs.available 1/2 "to 2" wide. HD BJ Y Arm with Platen Platen may be 3/8" - 3" wide. Uses HO BJ wheels only. Also availa ble without platen for slack belt grinding. Fork Arm For use with 2" wide contact wheels from 9/16" to 3" O.D. Specify Fork wheels when ordering. 3 wheel Yarm Center wheel may be shaped concave or convex. Belt will conform and track. Contact Wheels Large Rubber Wheels from 2-18"00 1/4" to 6" wide. Plain or serrated face in various durometers. Cloth Wheels from 4-18"00 1/2" - 6" wide. # 70 or # 90 density in stock. Above wheels require the appropriate hub and flanges to attach the wheel to the machine Lock-in Bearing Hub to fit lock-in fork on Space Saver or Centerless machines Tapered Bearing Hub to fit F-3 fork on Space Saver BJ wheels - fit BJ arms/tips 9/16-4" 00 1/4" - 2" wide HDBJ wheels- fit HDBJ arms/tips 2-5" 00 1/2"- 3" wide 30ML/ 30 MT- fit std Space Saver forks 2-5" 00 2" - 3" wide Fork wheels - fit fork arms/tips 9/16-3" 00 2"wide

4 Centerless Machines Always wear eye, hearing and appropriate body protection. The Standard Bader Centerless Attachment converts the 5 HP Bader Space Saver into a centerless grinding and polishing machine in minutes. Stock from I /4" to I 0" O.D. may be run in lengths up to 25 ft. provided bar weight does not exceed 300 lbs and stock supports are used. The speed and direction of feed are controlled by a single handle. This same handle is used to release grinding pressure when needed to protect threads, plunge cut only one section of the piece or grind up to a flange and remove. The machine adjusts for changes in stock diameter in less than a minute. Typical uses included finishing hand rails, punches, hydraulic shafts, tubular furniture stock, and large diameter drawn steel and aluminum cylinders, as well as applications designed to grind, deburr, clean and polish parts in preparation for plating or painting. The Bader Wheel Centerless polishes the OD of pipe and tube using non-woven abrasive wheels or wire brushes. The operator has full control over feed direction, speed and pressure. Typical uses include finishing handrails, punches, hydraulic shafts, sockets, cylinders, furniture stock as well as applications designed to grind, deburr and polish parts in preparation for plating or painting. The Linear Bearing Bader Centerless adds to the functionality of the standard centerless by floating the regulating wheel head on a linear bearing and applying precise pressure with an air cylinder/regulator combination. This allows slightly out of round parts and parts with tapers to be centerless ground or polished. A foot pedal allows the operator to control the motion of the head; freeing their hands to load or unload parts. This setup is also good for quick plunge cuts on short pieces that don't need to feed through the machine to get full belt coverage.

5 Always wear eye, hearing and appropriate body protection. Bm Bench Model The Bader BIII Bench Model is a rugged and powerful machine designed for production grinding and polishing but priced for tool room and maintenance applications. The standard machine is powered by a 2HP, 3 phase, 3450 rpm, TEFC motor. Variable speed with E-stop and brake, single phase or 1725 rpm motors are available as options. BID shown with standard BJ straight tip and I x I BJ wheel The easy to use tracking system and the ability to quickly change between a variety of useful accessories makes the Bill the most versatile bench model available. The Bill can use wheels from I /2" OD to 14" OD and from I /4" to 2" wide while maintaining a constant belt length of 72".Wheels are available flat faced or shaped in rubber, cotton or felt. Rear power allows you to maintain a constant belt speed regardless of contact wheel diameter or accessory tip. Standard equipment includes one Belt guard, HD arm with 6 x 2 serrated rubber contact wheel, one Adaptor arm with BJ tip and two BJ wheels., full voltage switch, 6 I /4" and 3" drive pulleys for 5800 & 2800 SF PM. Additional drive pulleys are available to yield belt speeds from 1500 to 9000 SFPM. O ptional contact wheel sizes and accessory tips may be substituted for standard equipment at the cost of their respective price differentials. Magnetic starters, workrests, special purpose tips and floor pedestals not shown are readily available upon request. BID shown with standard HD arm and 6 x 2 serrated rubber contact wheel and belt guard. Guard required to meet OSHA regulations is supplied with machine Easy and Precise Tracking Adjustable Belt Tension Quick Change Attachments Accepts Contact Wheels I /2" - 14" 0.0. The Most Versatile and Easiest to Use Machine Available Accessory Tips for Bm Bench Model (See page 3 for avai lable styles of contact wheels) BJ curved tip with Billy roll BJY tip fo r up to I" wide slack belt oolishin2 HDBJY tip fo r up to 2" wide slack belt polishing Hinged Angle Plate Allows fo r vertical or horizontal use with any wheel or accessory tip. Also avai lable on floor pedestal as shown BID Platen tip includes adjustable platen and 2" O.D. idler wheels standard. Optional work rest is available Fork tip For use with 2" wide wheels from 9/ 16" to 3" O.D. Specify BJ fo rk wheels when ordering

6 Always wear eye, hearing and appropriate body protection. Portable Belt Sander This 7 pound machine is powered by a 1.6 HP, I 0,000 RPM air motor with dead man switch. Contact wheels from 9/16" to 5" O.D. and 1/4" to I" wide may be used interchangeably with a constant 42" belt length and 5500 SFPM surface speed. The machine may be equipped for use with 2" wide belts at no extra cost. Contact wheels may be flat faced or shaped to fit a desired fillet radius. Belt tracking is positive and accurate. Belt changes are made in seconds. Cloth wheels are available for finishing as is a 5" long platen for flat work. Stock removal is generally done against the contact wheel while the slack of the belt behind the wheel is used for blending. The machine may be bench or lathe mounted. BJ Wheels available 9/16" to 5" Dia. and 1/4" to I" face. Plain or Serrated. Heavy duty BJ Wheels available 2" to 5" Dia. and 3/8" to 2" face. Typical applications include the grinding and finishing of welds and surface imperfections on hand rails, tanks, pressure vessels, large castings, metal furniture and fabricated steel, aluminum and stainless products. HEAVY DUTY ARM Supplied as standard equipment. Best arm for general use. Accepts both BJ and HD BJ wheels. TOOL POST ATTACHMENT Fits most standard open-sided lathe tool posts for lathe mountings. Weld finishing BJAARM For use with BJ wheels only. Offers 1/2" obstruction on one side only. BJP FORK (made in 2 widths) BJP FORK I /2" Accepts contact wheels I 1/2" to 4" O.D. and up to 1/2" face. Minimal obstruction on both sides permits best access to corner weld and radius areas. PLATEN ARM for flat work With platen for flat work. Always wear eye, hearing and appropriate body protection. BJP FORK 3/8" Accepts contact wheels 3/8" to I 1/2" O.D. and up to 3/8" face. For finishing in small radii, and corner. *All tips should be ordered with Slide Arm to permit rapid change over. Polishing and grinding equipment Stephen Bader Co., Inc. Box 297, I 0 Charles Street, Valley Falls, New York (518) Fax: (518)

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

Model. Reach into areas as small as 3/8. Model. Max. Air Flow SCFM (L/Min) The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

More information

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27

More information

Bulletin T Bulletin SG Bulletin T Bulletin SA MACHINERY

Bulletin T Bulletin SG Bulletin T Bulletin SA MACHINERY Bulletin T-10...54 Bulletin SG-1...55 Bulletin T-12...57 Bulletin SA-21...58 & A B e drawing V-00-0419 & G&P Machinery - GPSS Heavy Duty Stroke Sanders - MADE IN THE U.S.A. Model HP Belt Size Table

More information

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495) ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts

More information

Dynabrade Portable Abrasive Belt Tools

Dynabrade Portable Abrasive Belt Tools Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service

More information

UNIVERSAL PRODUCTION EDGE BELT SANDERS

UNIVERSAL PRODUCTION EDGE BELT SANDERS UNIVERSAL PRODUCTION EDGE BELT SANDERS Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing

More information

JET FINISHING. Surface Grinders Bench Grinders Accessories

JET FINISHING. Surface Grinders Bench Grinders Accessories JET FINISHING Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE

More information

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is

More information

Grind-O-Flex. Wheels FLAP WHEELS

Grind-O-Flex. Wheels FLAP WHEELS Grind-O-Flex Wheels FLAP WHEELS From large Grind-O-Flex wheels 16 in diameter to Micro-Mini wheels 3/8 diameter, Merit Abrasives has the flap wheel for your application. Merit Grind-O-Flex flap wheels

More information

ANSI B Index

ANSI B Index Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...

More information

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD94 53 Models: 11462 Standard Duty/Finisher Dynabelter 11475 Standard Duty 11476 Heavy Duty 1" Wide Abrasive Belt Capacity! WARNING 1

More information

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32

WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32 Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31

More information

Unison Corporation. DedTru Centerless Grinding Product Line

Unison Corporation. DedTru Centerless Grinding Product Line Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture

More information

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support 3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols SS MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina

More information

Portable Air Tools for the Value-Minded Professional

Portable Air Tools for the Value-Minded Professional Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool

More information

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN:

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are

More information

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina/Aluminum Oxide Blend, Aluminum Oxide

MACHINES USED CATEGORY DEFINITION GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina/Aluminum Oxide Blend, Aluminum Oxide CATEGORY DEFINITION Flap wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are

More information

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support 3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina Zirconia

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

premium aluminum oxide flap wheels unmounted metal hub. Interleaf flap Wheels

premium aluminum oxide flap wheels unmounted metal hub. Interleaf flap Wheels premium aluminum oxide flap s unmounted metal hub size arbor 40 60 80 120 150 180 240 320 4" x 1" 5/8" 40836 43301 43302 43304 43306 43308 43309 5 4" x 1-1/2" 5/8" 41079 43351 43352 43353 43354 43355 43356

More information

Carbon Fiber Air Shafts. Custom Carbon Fiber Tubes

Carbon Fiber Air Shafts. Custom Carbon Fiber Tubes Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

Wheel Size. Catalog Number. List Price. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Wheel Size. Catalog Number.

Wheel Size. Catalog Number. List Price. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Wheel Size. Catalog Number. Industrial Cast aluminum wheel guards can be exhausted or left closed. 8-foot power cord. Base mounted on/off switch. Rubber feet minimize vibration. 1/3 3600 6 x3/4 x1/2 600E 296 G1 30 115 Grinder UL

More information

FINISHING TOUCHES. Force control: The key to successful robotic deburring. by Nathan Herbst, technical service engineer, 3M Abrasive Systems

FINISHING TOUCHES. Force control: The key to successful robotic deburring. by Nathan Herbst, technical service engineer, 3M Abrasive Systems FINISHING TOUCHES Force control: The key to successful robotic deburring by Nathan Herbst, technical service engineer, 3M Abrasive Systems ntegrating automation into any industry brings challenges. For

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min)

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min) 3 Wheel Belt Grinder Parts Page Reorder No. PD.36 Effective October 0 SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Model Number Motor hp FLA Voltage Phase Frequency SFPM (SM/Min) Sound Level Weight Pound

More information

Catalog Number. List Price. Wheel Size. List Price. Catalog Number. Wheel Size. Wheel Size. List Price. Catalog Number. Wheel Size.

Catalog Number. List Price. Wheel Size. List Price. Catalog Number. Wheel Size. Wheel Size. List Price. Catalog Number. Wheel Size. Generators Servo s Industrial 600E 623E Cast aluminum wheel guards can be exhausted or left closed. 8-foot power cord. Base mounted on/off switch. Rubber feet minimize vibration. Cast aluminum non-exhaust

More information

Centerless. Deburring, Polishing & Finishing Machines

Centerless. Deburring, Polishing & Finishing Machines Centerless Deburring, Polishing & Finishing Machines application automation Centerless Deburring, Polishing & Finishing Systems Randbright Machines and Systems run a variety of finishing wheels, wire brushes,

More information

Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors

Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors Belt Driven Live Conveyors Conveyors - 195 - Light Duty Transportation Type... 196 Minimum Pressure Accumulation Type... 198 Medium Duty Transportation Type... 200 Heavy Duty Transportation Type... 202

More information

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert Model: 11000 11001 Versatility Kit 11003 w/benchmount O L T Oil KEY G Grease Loctite/Hernon: L 2 = Hernon #940 Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Parts Page Reorder No. PD97 01

More information

THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE

THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design

More information

Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS

Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru

More information

.4 hp Die Grinders & Disc Sanders

.4 hp Die Grinders & Disc Sanders .4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head

More information

SANDERS AND ABRASIVES

SANDERS AND ABRASIVES 22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt

More information

ALWAYS A WINNING HAND

ALWAYS A WINNING HAND ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications

More information

NEW from Osborn...ATB Ceramic Filament

NEW from Osborn...ATB Ceramic Filament NEW from Osborn...ATB Ceramic Filament About Osborn Since Osborn s inception in 1887, success has always been about ensuring that you finish first. Whether it was last century, last week or in the last

More information

High Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change

High Performance. Mini Grind-O-Flex Wheels HIGH PERFORMANCE MINI GRIND-O-FLEX QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Quick-Change GRIND-O-FLEX IMPROVED High Performance QUICK-CHANGE (CONTINUED) Mini Grind-O-Flex Wheels X 1/4-20 THD. Mini Grind-O-Flex Quick-Change The Mini Grind-O-Flex is designed for polishing and grinding intricate

More information

Mitre Band Saw. Installation and Operating Instructions Note: Not all saw parts are shown in this booklet. Replaceable Aluminum Saw Table

Mitre Band Saw. Installation and Operating Instructions Note: Not all saw parts are shown in this booklet. Replaceable Aluminum Saw Table P ARTS C ATALOG 2G PARTS CATALOG Drive Wheel End Pulley Box Speed Reducer M FG. COMPANY, INC. Mitre Band Saw Installation and Operating Instructions Note: Not all saw parts are shown in this booklet Motor

More information

LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES

LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW

More information

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Versatility Grinder Tool Manual Safety, Operation and Maintenance Parts Page Reorder No. PD07 Effective June, 007 Supersedes PD0 A HP Variable Speed Models: 64900 (5v) Phase 50/60 Hz 6490 (0v) Phase 50/60

More information

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls Carbon Fiber Air Shafts Air Shafts Core Chucks Adapter chucks Safety chucks Bowed Rolls The Center of Superior Web Handling Since 1961 NimCor has pioneered web handling solutions with innovative air shafts,

More information

MADE IN USA SINCE 1951 SURFACE CONDITIONING DEBURRING CLEANING DESCALING FINISHING

MADE IN USA SINCE 1951 SURFACE CONDITIONING DEBURRING CLEANING DESCALING FINISHING Catalog #64 GRINDING POLISHING MADE IN USA SINCE 1951 SURFACE CONDITIONING DEBURRING CLEANING DESCALING FINISHING BELT GRINDERS DISC GRINDERS POLISHERS VIBRATORY SURFACE CONDITIONING EQUIPMENT WWW.BURRKING.COM,

More information

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

Catalog # D Catalog # TD Catalog # TD Catalog # AS. Mult. Sym. Shpg. Wgt.

Catalog # D Catalog # TD Catalog # TD Catalog # AS. Mult. Sym. Shpg. Wgt. Industrial Abrasive Belt Sanders offers several options when it comes to industrial belt sanders, fixed and tiltable belts, grinder/sanders and even an adjustable speed sander for increased flexibility.

More information

SCAN TO VIEW WEBSITE

SCAN TO VIEW WEBSITE SCAN TO VIEW WEBSITE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls Carbon Fiber Air Shafts Air Shafts Core Chucks Adapter chucks Safety chucks Bowed Rolls The Center of Superior Web Handling Since 1961 NimCor has pioneered web handling solutions with innovative air shafts,

More information

Dynabuffer...82 Two-Step Repair System " Dia. Buffers "-8" Buffers...87

Dynabuffer...82 Two-Step Repair System  Dia. Buffers -8 Buffers...87 Dynabuffer...82 Two-Step Repair System...83 3" Dia. Buffers...84 5"-8" Buffers...87 6"-8" Buffers...88 Straight-Line Buffer...89 Electric Buffer...89 Random Orbital Polishers/Head Kit...90 82 Dynabuffer

More information

7" CUT-OFF SAW - 1 HP 10" SAWS - 3 HP 8" CUT-OFF SAW - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE

7 CUT-OFF SAW - 1 HP 10 SAWS - 3 HP 8 CUT-OFF SAW - 3 HP 10 WET SAW BIG JOB CAPACITY 1-1/2 SOLIDS, 2-1/2 PIPE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable

More information

BELT GRINDERS MODEL X 42 BELT

BELT GRINDERS MODEL X 42 BELT SPEED FIXED SPEED VARIABLE BELT GRINDERS MODEL 562 1 X 42 BELT HZ HP 5300-70 60 3/4 120/1 56100 1,812.00 5300-70 60 3/4 220/1 56200 1,812.00 5300-85 60 3/4 220/3* 56303 2,467.00 5300-85 60 3/4 440/3* 56403

More information

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod Effective Serial Number Reference Table Model Number Serial Number 40320, 40321 36300 40326 1284 40330 3001 40335 1129 Models: 40320 Standard Machine 40326 20-1/2" Long Belt Machine 40330 Vacuum Machine

More information

Accessory Items ACCESSORIES GRINDING

Accessory Items ACCESSORIES GRINDING Accessory Items The convenience of one stop shopping is provided through the selection of accessories offered by United Abrasives to complement and match our product offering. All of the accessories carried

More information

Pierce Pacific Manufacturing, Inc. Pierce Denharco, Inc. POWER ATTACHMENTS

Pierce Pacific Manufacturing, Inc. Pierce Denharco, Inc. POWER ATTACHMENTS Pierce Pacific Manufacturing, Inc. Pierce Denharco, Inc. POWER ATTACHMENTS FORESTRY Designed for the rigors of heavy forestry applications & road building, demolition and material handling, as well as

More information

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES GET D FOR SUCCESS WITH NEW BRUSHES When you need the perfect low-impact solution for refining surfaces without removing any base material, try our new line of Norton wire brushes. This new, economically

More information

COUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138.

COUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138. 1 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 2 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 3 3331 REAR DRUM BRAKE RETURN SPRING 5 $ 51.31 5 10285 LEFT REAR DRUM BRAKE AIR CAN REACH ROD ( LONG ROD ) 1 $ 85.12

More information

LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION

LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific

More information

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital... Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55

More information

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions 3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work

More information

DEPRESSED CENTER WHEELS

DEPRESSED CENTER WHEELS Norton Company s depressed center wheels are the industry s most advanced line of performance and value products for weld and flame cut grinding, pipe notching and steel and non-steel metal fabrication

More information

INDUSTRIAL WIRE BRUSHES

INDUSTRIAL WIRE BRUSHES INDUSTRIAL WIRE BRUSHES HIGH PERFORMANCE POWER BRUSHES Technical Information Power brushes have long been used for edge and surface conditioning on a wide variety of materials. Unlike grinding wheels and

More information

MODEL A-I-SPECIFICATIONS

MODEL A-I-SPECIFICATIONS ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.

More information

JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses

JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117

More information

Wrinkle Removal Systems. WrinkleSTOP Scroll Roll Adjusta-Pull

Wrinkle Removal Systems. WrinkleSTOP Scroll Roll Adjusta-Pull Wrinkle Removal Systems WrinkleSTOP Scroll Roll Adjusta-Pull WrinkleSTOP No-Bow anti-wrinkle roll Expanding Surface Rolls: The only wrinkle removal system in a recent major independent presentation to

More information

Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask

Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask GravitymANUAL Table of Contents Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask 2 3 4 5 7 9 11 ROLLER CONVEYOR 2 Based on their almost

More information

SMALL DIAMETER WHEELS

SMALL DIAMETER WHEELS SMALL DIAMETER WHEELS CUTTING & SNAGGING WHEELS FOR DIE GRINDERS Get the most demanding jobs done right and done fast. 800.835.9999 / weilerabrasives.com SELECTING THE RIGHT WHEEL MAX PERFORMANCE SUPERIOR

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

Twin City Fan & Blower

Twin City Fan & Blower BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE

More information

Engineering Solutions With Coated Abrasive Technology

Engineering Solutions With Coated Abrasive Technology Engineering Solutions With Coated Abrasive Technology Engineered Abrasives Business Norton Company May20, 1999 Update TRADITIONAL METHOD OF CHOOSING AN ABRASIVE: Customer s Performance Criteria Manufacturer

More information

MADE IN THE USA SINCE product catalog

MADE IN THE USA SINCE product catalog product catalog YOUR IS YOUR REPUTATION. That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what

More information

BACK STRAP REMOVAL AND PREPARATION TOOL MODEL # BSRT-15/10

BACK STRAP REMOVAL AND PREPARATION TOOL MODEL # BSRT-15/10 BACK STRAP REMOVAL AND PREPARATION TOOL MODEL # BSRT-15/10 MANUFACTURED BY: TRIANGLE ENGINEERING INC. HANOVER, MA 02339 USA PH: 781-878-1500 FAX: 781-878-2547 WWW.TRIENG.COM REV 0610 BACK STRAP REMOVAL

More information

Inspection and Repair of Compressor Wheels

Inspection and Repair of Compressor Wheels Subject: Applicable EXTEX Engineered Products Part Numbers: Installations: Revision History: Reason: Description: Inspection and Repair of Compressor Wheels E23057111 (Stage 1), E23057112 (Stage 2-3),

More information

Section Content. Straight Curve Optional Equipment and Devices

Section Content. Straight Curve Optional Equipment and Devices Chain Driven Live Roller Conveyor Section Content Straight Curve Optional Equipment and Devices 31 CDLR Chain DRIVEN LIVE ROLLER CONVEYOR Why CDLR? Roller size and centers optimized to handle nearly any

More information

600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS

600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS 600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of

More information

8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B

8 CUT-OFF SAW - 3 HP 10 SAWS - 3 HP 10 WET SAW BIG JOB CAPACITY 1-1/2 SOLIDS, 2-1/2 PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable

More information

Mirror Kits and Assemblies

Mirror Kits and Assemblies Mirror Kits and Assemblies Stylmark offers sturdy, high-quality fitting room systems designed to fit together easily and quickly allowing for rapid field installation. With the flexibility of our post-andpanel

More information

CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Web:

CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc.   Web: CLK Series Air Chain Hoist Distributed by Tri-State Equipment Company Inc. Email: sales@tsoverheadcrane.com Web: www.tsoverheadcrane.com PH: 314-869-7200 FAX: 314-869-7226 Industry-leading durability,

More information

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can

More information

INDUSTRIAL POWER TOOLS

INDUSTRIAL POWER TOOLS Reorder No. D10.10 INDUSTRIAL POWER TOOLS Continued Leadership In Portable Abrasive Power Tool Technology www.dynabrade.com INTRODUCTION Who We Are Since 1969, Dynabrade has earned a reputation of excellence

More information

GRINDING. Grinding Wheels

GRINDING. Grinding Wheels Grinding Wheels GRINDING Industry leading grinding wheels, burrs and points from Walter are manufactured with productivity in mind and under the most stringent quality control standards. Grain, bond and

More information

12" and 14" SAWS - 5 HP

12 and 14 SAWS - 5 HP 12" and 14" SAWS - 5 HP MODEL K14SS These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. Extra-heavy Cast iron base, trunnion and arm. Sealed ball bearings, 1" wheel

More information

Creusen Industrial Double Grinders 9000

Creusen Industrial Double Grinders 9000 The double grinding machines (DS) are fitted with grinding wheels with diameters of 200 mm, 250 mm and 300 mm respectively. They are characterised by their high, progressive power ratings which are more

More information

GENESIS ROTOBLAST. Unrivaled Performance. Reduced Costs. Reversible 8 Vane Wheel for all Surface Preparation Applications

GENESIS ROTOBLAST. Unrivaled Performance. Reduced Costs. Reversible 8 Vane Wheel for all Surface Preparation Applications GENESIS ROTOBLAST Unrivaled Performance. Reduced Costs. Reversible 8 Vane Wheel for all Surface Preparation Applications Your Global Resource for Shot Blasting Equipment GENESIS ROTOBLAST Genesis Rotoblast

More information

CONTENTS ONE YEAR LIMITED WARRANTY

CONTENTS ONE YEAR LIMITED WARRANTY CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

Two-Hand Tool Series from Dynabrade

Two-Hand Tool Series from Dynabrade Two-Hand Tool Series from Dynabrade Random Orbital, Gear-Driven and Dual Action Sanders Reorder No. D04.05 Efficient Pneumatic Motor Offers Increased Power Advanced Design Allows Optimum Comfort and Control

More information

Versatility Grinder Tool Manual Safety, Operation and Maintenance

Versatility Grinder Tool Manual Safety, Operation and Maintenance Versatility Grinder ool Manual Safety, Operation and Maintenance SAVE HIS DOCUMEN, EDUCAE ALL PERSONNEL Parts Page Reorder No. PD0 Effective June, 00 HP Variable Speed Models: 4900 (v) Phase 0/0 Hz 490

More information

Viper Parts Catalog. September 2010 Innovative Peripheral Solutions (IPS),

Viper Parts Catalog. September 2010 Innovative Peripheral Solutions (IPS), Viper Parts Catalog Innovative Peripheral Solutions (IPS) has been a manufacturer of parts for the Dodge Viper since 1997, and has produced many products for Vipers including brake systems, cosmetic parts,

More information

WHEEL ADAPTERS 12 INCH DIAMETER WAN 1-1/2" Long Wheel Adapter 34.57

WHEEL ADAPTERS 12 INCH DIAMETER WAN 1-1/2 Long Wheel Adapter 34.57 ACCESSORIES Dia x Width 6 INCH DIAMETER CPW-8 Cotton, Sewn 6x1 3/4" arbor 43.80 CFW-12 Cut & Polish, 6x1x1, 5ACor 79.53 CFW-13 Cut & Polish, 6x1x1, 6ACor 79.53 CFW-19 Cut & Polish, 6x2x1, 5AMed 182.11

More information

THE TABLE OF CONTENTS

THE TABLE OF CONTENTS ROLLER CATALOG THE TABLE OF CONTENTS General Information Page Sizes and 2 Retention and 2 Construction 2 Bearing Features and Lubrication 2 Sprocket Information 2 Groove Information 3 Load Capacity Reference

More information

Panel Beating Hammers

Panel Beating Hammers PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060

More information

Improving. Your. Competitive Edge. 3M Industrial Business Industrial Products for Metalworking Edition

Improving. Your. Competitive Edge. 3M Industrial Business Industrial Products for Metalworking Edition 3M Industrial Business Industrial Products for Metalworking 2007 Edition Improving Your Competitive Edge. See added section on NEW 3M Bonded Superabrasives! What s New for 2007 NEW! 3M is proud to add

More information

Put 'em in and forget 'em!

Put 'em in and forget 'em! Put 'em in and forget 'em! Material Handling Fans The Converting and Manufacturing Industries Choice in Pneumatic Scrap Removal Systems Bulletin 011 The uniqueness and superior performance of designed

More information

w w w. m a r v e l s a w s. c o m

w w w. m a r v e l s a w s. c o m Quality Machines by Vertical Band Saws Series 8 Mark III Miter cuts up to 60 with optional power column tilt. Column adjustable from 90 to 3 canted. Capacity: 18 X 22 (457mm x 560mm) at 45 18 x 14.5 R,

More information

BELT GRINDERS MODEL 562 1x42 BELT

BELT GRINDERS MODEL 562 1x42 BELT All Burr King machines are avaiable in a wide variety of power options, if your power requirement is not listed please contact your distributor or the factory. FIXED VARIABLE (660) 438-8998 (800) 621-2748

More information

Utility Sets Standard Design Features Standard design features common to all Class I and Class II fans

Utility Sets Standard Design Features Standard design features common to all Class I and Class II fans Standard Design Features Utility Sets Standard Design Features Standard design features common to all Class I and Class II fans Shaft AISI 1045, turned ground and polished for accuracy. Designed to provide

More information

GROB 4V-24 Parts. GrobBandSaw.com

GROB 4V-24 Parts. GrobBandSaw.com GROB 4V- Parts GrobBandSaw.com 888-550-3116 18 19 20 21 22 5/16-18x1/2 Hex Head Cap Screw ( 14 ) 34 35 36 37 38 39 40 39 41 42 43 44 45 46 17 16 3/8-16x3/4 Hex Head Cap Screw ( 2 ) 31 30 15 5/16-18x1 Hex

More information

DAKE / JOHNSON VERTICAL BAND SAW

DAKE / JOHNSON VERTICAL BAND SAW DAKE / JOHNSON VERTICAL BAND SAW Model F - 6 INSTRUCTION MANUAL MODEL:F-6 SERIAL NUMBER: DATE PURCHASED: Need band saw blades? Call Dake DAKE (Division of JSJ) 724 Robbins Road Grand Haven, Michigan 4947

More information

3M Cubitron II Metalworking Belt 984F (cont.)

3M Cubitron II Metalworking Belt 984F (cont.) 3M Cubitron II Belts 3M Cubitron II Metalworking Belt 984F Made with revolutionary 3M precision shaped abrasive grain technology YF wt. backing Average up to 30% faster cutting on hard-to-grind metals

More information

CONVEYOR COMPONENTS AND ACCESSORIES. Better by design since 1901

CONVEYOR COMPONENTS AND ACCESSORIES. Better by design since 1901 CONVEYOR COMPONENTS AND ACCESSORIES Better by design since 1901 STEPHENS-ADAMSON HAS THE IDLER COMPLETE PRODUCT LINE Sealed, Regreasable, or Greased and Plugged CEMA B, C, D, AND E Ratings For Light to

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65

More information