LS-SERIES Features LS-1 LS-2 & LS-2P LS-2P

Transcription

1 Access Control Locksets Access Control Solutions for a Changing World

2 LS-SERIES Features Non-volatile eeprom memory allows in-shop programming One non-handed unit for both indoor and outdoor applications LS Series Access Control Locksets provide the value and accountability of access control where traditional locks and keys were used in the past. IEI combines field proven keypad technology with a Grade 1 lockset. Using metal alphanumeric Braille keys, UV conformal coated electronics and a neoprene gasket, Wire Raceway provides clean installation and protects wires inside door Programs the same as all IEI products Durable alphanumeric Braille keys Selective Lockout of groups of users Passage/Toggle codes allow door to remain unlocked Service codes allow one-time entry then are deleted automatically Error Lockout for successive invalid entry attempts Two Stage Low Battery Alert assures entry Propped Door and Forced Door alerts when used with a standard magnetic switch Request to Exit allows door to be unlocked from a distance Four standard AA batteries provide up to 150,000 operations. (100,000 LS-2P) the LS Series Locksets are rugged and provide true indoor/outdoor durability. The LS Series Locksets are LS-1 Keypad programmable with Master Code 120 individual user codes including Master, Supervisor and Emergency available in a variety of lock configurations to accommodate customer applications. Special order finishes are available to meet most architectural requirements. The LS Series are simple to install with only one additional 1 hole, or, 2 screw holes (model dependent) where existing locks were installed. For added protection the LS Series provide a through-door wire raceway LS-2 & LS-2P 2,000 individual users per lockset 2,000 transactions stored per lockset Wireless lockset programming and audit trail retrieval with PDA running Palm OS version 3.5 or newer Managed with HubManager Professional Software version 4 or newer Unlimited Access Levels including Time Zones and Holidays 10,000 users per system Unlimited Sites Import user names preventing wire chaffing and additional protection from moisture related failures. LS-2P Read most HID proximity cards and fobs Users can be Code, Card, Code and Card, Code or Card

3 Specifications General Backset: 2 3/4 Standard Strike: 4 7/8 ASA Strike Door Thickness: 1 5/8 to 1 7/8 Handing: Field reversible on Crescent and American handles, Monaco handle must be ordered with right or left handing specified Cylinder: Solid Brass Schlage C keyway Optional Cylinders: I/C Core Prep Lever to accept OEM cylinders (see configuration guide for details) Compliance ANSI 156.2, Series 4000 Grade 1 Federal Handicap and ANSI A117.1 Accessibility Code Federal FF-H-106C California: (Formerly Title 19, State Fire Marshall) Environmental Electronics sealed in conformal coating process Through door wire raceway reduces wire exposure to moisture Neoprene gasket seals exterior housing -20F to 120F, up to 98% humidity (non-condensing) Electrical Power: 4 AA alkaline batteries Cycles: Up to 150,000 Cylindrical This lockset easily retrofits into an ANSI prepped door and requires only one additional 1 hole for installation. Lock Body: Grade 1 Cylindrical Lockset w/ clutch mechanism Latch: 9/16 Throw, Stainless Steel Latch Retractor Cylinder: Solid Brass Schlage C keyway, 6 pin, with (2) nickel silver keys Optional Cylinders: I/C Core Prep Lever to accept OEM cylinders (see configuration guide for details) Mortise This lockset retrofits most ANSI Mortise prepped doors with the additional of (2) through holes. The LS Series Mortise lockset can be easily installed in a door with an existing mortise lock. Lock Body: Grade 1 Mortise Lock body Latch: Stainless Steel Latchbolt with 3/4 projection and deadlocking latch Handing: Field reversible on Crescent and American handles, Monaco handle must be ordered with right or left handing specified Cylinder: Solid Brass 1 1/8 Schlage C keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8 and 2 can be used with optional spacers Optional Cylinders: see configuration guide for details Exit Allows the LS Series locksets to be installed in door applications requiring emergency egress exit bar. Easily installs requiring only (2) additional through holes. Exit bar supplied by others. Lock Body: Grade 1 Mortise Lock body Latch: Stainless Steel Latchbolt with 3/4 projection and deadlocking latch Cylinder: Solid Brass 1 1/8 Schlage C keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8 and 2 can be used with optional spacers Optional Cylinders: see configuration guide for details Requires Exit Device Mounting Kit: see configuration guide for details Also compatible with Rim panic devices, surface horizontal rod devices. Contact factory for installation instructions for these applications Deadbolt This lockset retrofits most ANSI Mortise with Deadbolt prepped doors with the additional of (2) through holes. The LS Series Deadbolt lockset can be easily installed in a door with an existing mortise and deadbolt lock. Lock Body: Grade 1 Mortise Lock body with Deadbolt Latch: Stainless Steel Deadbolt with 1 projection, latchbolt with 1 3/4 projection and deadlocking latch. Deadbolt may be projected from option 1 3/4 mortise cylinder with cover cam or thumb turn from inside door Privacy Setting feature available Cylinder: Solid Brass 1 1/8 Schlage C keyway, 6 pin mortise cylinder, with (2) nickel silver keys. To project deadbolt from outside door requires a 1 3/4 mortise cylinder. 1 1/8 and 2 can be used with optional spacers and a straight cam Optional Cylinders: see configuration guide for details

4 LS Series Dimensions Handle Options Outside Crescent American Inside Monaco Communications The LS-2 & 2P offer the unique ability to communicate through a Hand Held PDA to Hub Manger Professional Software, Version 4.0 or higher. Realize the benefits of a traditional door controller with the ease of Stand Alone Installation The luxury of uploading and downloading (via PDA); Users Access Levels Transaction Logs Visit for a list of compatible PDA devices

5 Configuration Guide & Special Instructions LS Series model number legend LS2P C 26D CR ICB LS MODEL TYPE LS1 LS2 LS2P FINISH 26D US26D 10 US10B (6-8 weeks) 26 US26 (6-8 weeks) 3 US3 (6-8 weeks) CYLINDER TYPE Blank = Schlage C KA = Schlage C - keyed alike (3 weeks for 10 or more) ICB = SFIC Best ICY = RC Yale ICC = RC Corbin ICG = RC Schlage ICS = RC Sargent LC = No cylinder LOCK DEVICE C = Cylindrical Lockset M = Mortise Lockset D = Mortise Lockset w/deadbolt E = Exit Trim LEVER OR KNOB STYLE CR = Crescent lever (not avail for Schlage IC core prep) AM = American lever MO = Monaco lever (must specify R or L; avail US10B & US3 only) KN = Knob (not avail mortise& exit) (6-8 weeks) 4 = No Lever 9 = Special Instructions 427 Turnpike Street, Canton, MA fax: SPECIAL INSTRUCTIONS: Any order over 50 units - consult factory for availability Finishes ANSI BHMA Brushed chrome 26D 626 Dark bronze 10B 613 Polished chrome

6 International Electronics, Inc. (IEI) designs, manufacturers and markets electronic access control products for the security, material handling and industrial markets. IEI s products include Keypad and Stand Alone Systems, Access Control Locksets, Network Based Access Control, Browser Managed Access Control, Mobile Fleet Access Control and Fleet Management Systems. It markets these products to the leading industry distribution, installation and vertical end-user companies in the U.S., as well as Europe, Asia, Canada, South America and Australia. 427 Turnpike Street, Canton, MA fax: Doc # 2001 Rev # 1.0 Sept 04 Copyright 2004 International Electronics, Inc.