+91-8048600379 Rampura Tools http://www.rampuratools.in/ We are one of the leading distributor, suppliers and traders of Measuring Instrument. Owing to their accurate measurement, sturdy construction,

A.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date

Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm

Page : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *

Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement

Hi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date

Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges

Cal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra

Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65

Welcome to Garber C O R P O R AT E O V E R V I E W

CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope

Rev /07/2015 CATALOGUE - CALIBRATION SERVICES 1

Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we

Quotation. 4 Surface Plate Granite Grade 0 Make - Graph Datum Calibration Cert. Traceable to CMTI, Bangalore As per IS

Quotation 1 Foot rules Kristeel Shinwa Size inch/mm D % 6 / 150 12 / 300 24 / 600 36 / 1000 48 / 1200 72 / 2000 108 / 3000 Code 401 A 401 C 401 E 401 F 401 G 401 J 401 K Rs. 30 22 52 185 285 585 3100 6700

Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date

Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58

Discipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on

Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115

Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra

Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra

Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8

Amruta Electronics Corporation

+91-8048603192 Amruta Electronics Corporation https://www.indiamart.com/amruta-electronics/ Our organization is known in the market for importing and trading an advanced range of Ultrasonic Detector &

Accurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date

Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.

Height Master Page 345. Check Master Page 349. Calibration Tools Page 354

Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm

Schedule. 300 mm to 600 mm 600 mm to 1000 mm inch to 12 inch

LABORATORY LOCATION: (PERMANENT LABORATORY) MITUTOYO (M) SDN. BHD. MAH SING INTEGRATED INDUSTRIAL PARK BANDAR PINGGIRAN SUBANG 4, JALAN UTARID U5/14, SECTION U5 40150 SHAH ALAM SELANGOR, MALAYSIA Page:

0280 / 0281 Vernier depth gauges

0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard

Calitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra

Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours

ANAUM INTERNATIONAL ELECTRONICS LLC. Test and Measurement Calibration Services Test Bench.

ANAUM INTERNATIONAL ELECTRONICS LLC Test and Measurement Calibration Services Test Bench www.anaum.ae About Us Located in the Musaffah, Abu Dhabi, United Arab Emirates, Anaum International Electronics

Measuring. Affordable. Effective. Instruments

Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of ccreditation United Kingdom ccreditation Service Issue No: 028 Issue date: 10 pril 2018 ccredited to 6 Banner Park Wickmans Drive Coventry CV4 9X Contact: Keith rnold Tel: +44 (0)2476 426 316/317

OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION

OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software

Berufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009

Page 1 of 14 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 07 INFRASTRUCTURE CNC LIST Milling Concours Mondial des Metiers CNC Fraisage CNC Fräsen Position: Contact: Details: Email: Phone:

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at

Discipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6

Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.

Accurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date

Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper

TEST AND CALIBRATION SERVICES Ensuring quality and reliability.

> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

Discipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6

Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)

Fall Savings! HUGE SAVINGS!

Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without

Metrology Laboratory, CMTI, Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka Accreditation Standard ISO/IEC 17025: 2005

aboratory Metrology aboratory, CMTI, Central Manufacturing Technology ast Amended on 22.09.2016 Page 1 of 15 I. DIMENSION (Basic Measuring, Gauge etc.,) 1. ANGE GAUGE BOCKS $ 0 to 90 2.8 arc sec Using

YOUR MITUTOYO PROMOTION

Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices

200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until

3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier

Check Points. for Measuring Instruments

Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring

ICL Calibration And Testing Services, SCO - 37, Ground Floor, Sector-12, Panchkula, Haryana. Discipline Mechanical Calibration Issue Date

Last Amended on 09.12.2016 Page 1 of 8 I. DIMENSION (Basic Measuring, Gauge etc.) 1 LENGTH GAUGE/SETTING ROD $ Up to 100 mm >100 mm to 500 mm 1.5 µm 7.20 µm Using ULM, Gauge Block grade- 0 & Electronic

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES S.No 1 Name of the Laboratory ENGINEERING PRACTICES Total Area of Lab 62.0

TIME Testing Instrument Solutions (For Automotive Industry)

TIME Testing Instrument Solutions (For Automotive Industry) 1. Applications in Automotive Industry Engine: Leeb Hardness Tester (cylinder, crankshaft) Ultrasonic Hardness Tester (valve, gear) Roughness

Price List. Calibration Fee

3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th

Department of Mechanical Engineering ME6513 - METROLOGY AND MEASUREMENT LAB LABORATORY MANUAL Name Register No. Branch Year & Semester : : : : 1 CONTENTS S.NO. DATE EXPERIMENT NAME PAGE NO. 1 Calibration

CALIBRATION SYSTEM CERTIFICATE

CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)

0268 Gear tooth calipers

0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26

L éditorial. Robert Renaud

L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce

Discipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on

Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);

Delux Bearings Limited. Inspiring EVERY Movement

Delux Bearings Limited Inspiring EVERY Movement Clutch Release Bearings King Pin Bearings Steering Bearings Delux Bearings Ltd Leading supplier for Clutch release Bearings, King Pin Bearings, Thrust &

Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.

Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule

Alico Industrial Equipments

+91-8048718620 Alico Industrial Equipments https://www.indiamart.com/alico-industrial-equipments/ We are one of the leading suppliers of state-of-the-art Industrial Tools & Accessories, Machines, Industrial

Central Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal

Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm

Standard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32

Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used

FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)

FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK

GOVERNMENT ITI DHANUVACHAPURA

Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized HEAVY MACHINERY 1 Milling machine (vertical)size no1 with standard accessories & the

Quotation. Catalog Page - 3 Page - 3 Page - 3 Page - 3

Quotation 70 Right Angle / Tri Square - Grade - I Size ( L x W x T ) mm Disc % 100 x 70 x 10 150 x 100 x 12 200 x 140 x 15 250 x 165 x 20 300 x 200 x 20 Crystal Rs. 4 2020 2300 4550 5150 6470 Code AA-2701

Phone:

KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for

Measurement & Calibration

Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration

+91-8048602840 Madras Tools http://www.madrastools.in/ We are engaged in distributor and supplying a broad array of Power and Pneumatic Tool to our prestigious customers. Provided products are highly demanded

Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points

Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134

Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical

Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130

TRI-STATE INSTRUMENT SVC, INC

CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or

QA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa

Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;

+91-8048078717 Japsin Instrumentation http://www.temperature-pressure-gauges.com/ We are an ISO 9001:2015 certified organization engaged in manufacturing & exporting of Testing & Measurement Instruments.

台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY

C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R

Dial and Electronic. Indicators Gauges

Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range

MITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION

Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of ccreditation United Kingdom ccreditation Service ccredited to Division of Cromwell Tools Ltd Services Block 65 Chartwell Drive Wigston Leicester LE18 2FS Contact: Mr T still Tel: +44 (0)116-2572396

Autocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra

Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial

THONBURILOHA ENGINEERING COMPANY PROFILE

THONBURILOHA ENGINEERING COMPANY PROFILE ก 19. 30 ก ก ก. 10140. 02-4271471, 02-4275625, 02-4277757 FAX. 02-4277820 ก / ก ก ก. ก ก ก ก ก 42 ก ก ก ก ก ก ก 4 8 ก 20 ก ก ก ก ก ก Managing Director ก THONBURILOHA

ONLY use MLR, Ast, or MST

2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive

Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.

SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES

Thickness Gages SERIES 547, 7

Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion

DIVINE GROUP OF COMPANIES COMPANY PROFILE

DIVINE GROUP OF COMPANIES COMPANY PROFILE CONTENTS Company Overview Business Strategy for next 5-Years Manufacturing Plants Activities and available facilities Infrastructure Design & Development softwares

METROLOGY In Germany at home in demand worldwide.

METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,

Lab Specifications. Automotive 4 Wheeler Repair

Lab Specifications Automotive 4 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the

SCOPE OF ACCREDITATION TO ISO/IEC & KS Q ISO/IEC

SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 & KS Q ISO/IEC 17025-2006 Korea Instrument Co., Ltd. Branch 45, Gwangjang-ro 56beon-gil, Sasang-gu, Busan 46976 Phone : 051-322-0880, Fax : 051-322-4066, E-mail

We are a renowned Manufacturer, Wholesaler,

+91-8048762075 Amar Centre http://www.amarbearing.com/ We are a renowned Manufacturer, Wholesaler, Exporter, Distributor, Importer and Trader of Industrial, Linear Bushing, Needle Roller Hardcrome shaft,rodend

Catalog No. E Check Points. for Measuring Instruments

Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding

Pyramids Technology Corp. List of Equipment HQ&QC Combined Total No: 285 Date: 2014/4/22 No NAME BRAND / MODEL CALIBRATION

Pyramids Technology Corp. List of Equipment HQ&QC Combined Total No: 285 Date: 2014/4/22 No NAME BRAND / MODEL CALIBRATION 1 Coordinate Measuring Machine (CMM) 2 Clean Room at Class 10,000 standard ZEISS/CONTURA

ISO/IEC ACCREDITED CALIBRATION LABORATORY

My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4

Institute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra

Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using

We are an ISO engaged in manufacturing and exporting power diesel generator set, construction earth moving equipment, industrial diesel

We are an ISO 9001-2000 engaged in manufacturing and exporting power diesel generator set, construction earth moving equipment, industrial diesel generator set and spares, oil & gas field jobs & services

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)

The FMM force tester can be controlled using L1 software for limit, cycling, hold and coefficient of friction testing.

FMM FMM may be used with L1 software or with a Starrett DFC or DFG digital force gage. FMM digital force testers are compact and ideal for highvolume, lean manufacturing production. FMM testers are available

... CALIBRATION SERVICES PRICELIST. M&B Calibr. Accredited calibration company. No according to ČSN EN ISO/IEC

M&B Calibr... CALIBRATION SERVICES PRICELIST Accredited calibration company No. 2301 according to ČSN EN ISO/IEC 17025. Experience since 1991 Guaranteed quality Professional attitude www.mbcalibr.cz You

0230 / 0231 Workshop calipers with parallax-free reading

0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external

RECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2

RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)

TESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS

CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC

Cetemet, your ally for your innovative ideas

Cetemet, your ally for your innovative ideas METROLOGY Lab CLIMATE TESTS Lab WELDING AND MATERIALS Lab METROLOGY Services Metrology services 3D Digitizing for dimensional control and reverse engineering

Dial Test Indicators SERIES 513

Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow

Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students

Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity

PRECISION TOOL SALE SPRING 2018

PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers

MEASURING & LEVELING TOOLS

Calipers & Dividers...398, 399 Contour Markers...407, 408 Derrick Tape Refills...419 Derrick Tapes...419 Dial & Digital Indicators...422 Feeler & Pitch Gauge Sets...401 Finders & Scanners...400 Flange

Surat Exim Private Limited

+91-8071801667 Surat Exim Private Limited https://www.indiamart.com/suratexim-private-limited/ We are an ISO 9001 : 2008 Certified Company. We are active as Exporter, Importer, Manufacturer, Trader, Wholesaler,

CALIBRATION PRICE LIST

THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters

CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED

CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED 2 ADDRESS PLOT NO 2, OPP. ULTRATECH CEMENT FACTORY, NR. TELEPHONE EXCHANGE, NARODA GIDC ROAD, NARODA, AHMEDABAD 382330. GUJARAT, INDIA. 3

NEW FOR POLE POSITION DEALS PREMIUM QUALITY. PROFESSIONAL PRODUCTS. OCT JAN 2019 IN THIS ISSUE:

BUILTÊ ÊTOÊLASTÊA L PREMIUM QUALITY. PROFESSIONAL PRODUCTS. I F E T I M E OCT 2018 - JAN 2019 IN THIS ISSUE: Project Car Tool Storage Sockets & Accessories Spanners & Wrenches Fastening Tools Torque Control

DRIVE AXLE Nissan 240SX DESCRIPTION & OPERATION AXLE RATIO & IDENTIFICATION AXLE SHAFT & BEARING R & I DRIVE SHAFT R & I

DRIVE AXLE 1990 Nissan 240SX 1990 DRIVE AXLES Rear Axle - R200 240SX, 300ZX DESCRIPTION & OPERATION The axle assembly is a hypoid type gear with integral carrier housing. The pinion bearing preload adjustment