UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: CME3-7 A-S-I-E-AVBE. Pump Data

Transcription

1 Submittal Data PROJECT: REPRESENTATIVE: ENGINEER: CONTRACTOR: UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: CME3-7 A-S-I-E-AVBE QUANTITY: DATE: DATE: DATE: CME are reliable, quiet and compact horizontal end-suction pumps. The modular pump design makes it easy to make customized solutions. The CME pumps are available in cast iron and stainless steel Product photo could vary from the actual product Conditions of Service Pump Data Motor Data Flow: 1.59 m³/h Head: 2.1 m Efficiency: 39.2 % Liquid: Water Temperature: 2 C NPSH required:.55 m Viscosity: 1 mm²/s Specific Gravity: 1. Maximum operating pressure: 1 bar Liquid temperature range: C Maximum ambient temperature: 4 C Approvals: CE,TR,CURUS,EAC Shaft seal: AVBE Flange standard: INTERNAL NPT THREAD Product number: On request Rated power - P2: Rated voltage: Main frequency: Enclosure class: Insulation class: Motor type: 1.5 kw 2-24 V 6 Hz IP55 F 9C H % CME3-7, 1*23 V Q = 1.59 m³/h H = 2.1 m n = 5 % / 1778 rpm Pumped liquid = Water Liquid temperature during operation = 2 C Density = kg/m³ eta [%] % 3 2 P [kw] 1 Eff pump = 49.4 % Eff pump + motor + freq. conv = 39.2 % Q [m³/h] NPSH P1 (motor+freq.converter) 15 P P1 (motor+freq.converter) =.221 kw P2 =.175 kw NPSH =.55 m 5 1/17

2 Submittal Data Rp 3/ Rp 3/ Materials: Pump housing: Impeller: Material code: Rubber: Code for rubber: DIN W.-Nr DIN W.-Nr AISI 34 I EPDM E 2/17

3 Tender Text Date: 9/24/217 Product No.: On request CME3-7 A-S-I-E-AVBE Liquid: Pumped liquid: Water Liquid temperature range: C Liquid temperature during operation: 2 C Density: kg/m³ Kinematic viscosity: 1 mm²/s Technical: Actual calculated flow: Resulting head of the pump: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: Impeller: Rubber: 1.59 m³/h 2.1 m AVBE CE,TR,CURUS,EAC ISO996:212 3B DIN W.-Nr DIN W.-Nr AISI 34 EPDM Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 1 bar Max pressure at stated temperature: 1 bar / 4 C Flange standard: INTERNAL NPT THREAD Pump inlet: Pump outlet: Electrical data: Motor type: IE Efficiency class: Rated power - P2: Main frequency: Rated voltage: Rated current: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): 9C IE5 1.5 kw 6 Hz 1 x 2-24 V A 36-4 rpm IP55 F Others: Minimum efficiency index, MEI :.7 Net weight: 17.1 kg Printed from Grundfos Product Center [ ] 3/17

4 Date: 9/24/217 Gross weight: 2.6 kg Printed from Grundfos Product Center [ ] 4/17

5 Date: 9/24/217 Position Count Description 1 CME3-7 A-S-I-E-AVBE Product No.: On request Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. Pump materials in contact with the liquid are in stainless steel. The mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal NPT pipe threads. The pump is fitted with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. Further product details Pump and motor are integrated in a compact and user-friendly design. The pump is fitted to a low base plate, making it ideal for installation in systems where compactness is important. The state-of-the-art design and materials of the shaft seal ensure high wear resistance, improved sticking and dry-running capabilities and long operating life. Servicing the pump requires no special service tools. Service parts are in stock for quick delivery and are available as kits, single parts or bulk. Service videos are available on Frequency converter operation offers these functions: - controlled operation, i.e. consumption flucturates - constant pressure - communication with the pump. Adaption of performance through frequency-controlled speed offers obvious benefits such as: - energy savings - increased comfort - control and monitoring of the application and pump performance. A control panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the control panel provides visual indication of pump status: - "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) - "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) - "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of the Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Pump A combination of a stop ring and a Nord-lock washer secures a tight and reliable fixation of the impeller spacing pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from the pump side. The inlet and outlet port are integrated in the pump sleeve. The inlet part, chambers and discharge part are held together by four staybolts and a retaining flange. Printed from Grundfos Product Center [ ] 5/17

6 Position Count Description Company name: Date: 9/24/217 The pump is fitted with an unbalanced O-ring seal with a rigid torque transmission system. It has a fixed seal driver ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring. Primary seal: - Rotating seal ring material: Aluminium oxide (alumina) - Stationary seat material: Carbon graphite, resin-impregnated Carbon graphite against alumina is a good all-round seal for not too demanding applications. The corrosion resistance is often limited in water to a range between ph 5 and ph 1. Usage in liquids above +9 C is not recommended. The seal can handle dry-running conditions for short periods. Secondary seal material: EPDM (ethylene-propylene rubber) EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils. The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be dismantled. Motor The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN Electrical tolerances comply with EN 634. The motor efficiency is classified as IE5 in accordance with IEC The motor requires no external motor protection. The motor control unit incorporates protection against slow- and quick-rising temperatures, e.g. constant overload and stalled conditions. The terminal box holds terminals for these connections: - one dedicated digital input - two analog inputs, (4)-2 ma, -5 V, -1 V, V - 5 V voltage supply to potentiometer and sensor - one configurable digital input or open-collector output - Grundfos Digital Sensor input and output - 24 V voltage supply for sensors - two signal relay outputs (potential-free contacts) - GENIbus connection - interface for Grundfos CIM fieldbus module. Technical data Liquid: Pumped liquid: Water Liquid temperature range: C Liquid temperature during operation: 2 C Density: kg/m³ Kinematic viscosity: 1 mm²/s Technical: Actual calculated flow: Resulting head of the pump: Primary shaft seal: Approvals on nameplate: Curve tolerance: Materials: Pump housing: 1.59 m³/h 2.1 m AVBE CE,TR,CURUS,EAC ISO996:212 3B DIN W.-Nr Printed from Grundfos Product Center [ ] 6/17

7 Position Count Description Impeller: Rubber: Date: 9/24/217 DIN W.-Nr AISI 34 EPDM Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 1 bar Max pressure at stated temperature: 1 bar / 4 C Flange standard: INTERNAL NPT THREAD Pump inlet: Pump outlet: Electrical data: Motor type: IE Efficiency class: Rated power - P2: Main frequency: Rated voltage: Rated current: Rated speed: Enclosure class (IEC 34-5): Insulation class (IEC 85): 9C IE5 1.5 kw 6 Hz 1 x 2-24 V A 36-4 rpm IP55 F Others: Minimum efficiency index, MEI :.7 Net weight: 17.1 kg Gross weight: 2.6 kg Printed from Grundfos Product Center [ ] 7/17

8 CME3-7 A-S-I-E-AVBE 6 Hz Date: 9/24/217 H 1 1 % CME3-7, 1*23 V Q = 1.59 m³/h H = 2.1 m n = 5 % / 1778 rpm Pumped liquid = Water Liquid temperature during operation = 2 C Density = kg/m³ eta [%] % Eff pump = 49.4 % Eff pump + motor + freq. conv = 39.2 % Q [m³/h] P [kw] NPSH P1 (motor+freq.converter) 1.5 P P1 (motor+freq.converter) =.221 kw P2 =.175 kw NPSH =.55 m Printed from Grundfos Product Center [ ] 8/17

9 Rp 3/8 Rp 3/ Company name: Date: 9/24/217 Description General information: Product name: Product No.: Value CME3-7 A-S-I-E-AVBE On request Based on: ,CMMAT1,CMS E186 EAN: On request Technical: Actual calculated flow: 1.59 m³/h Resulting head of the pump: 2.1 m Impellers: 7 Primary shaft seal: AVBE Approvals on nameplate: CE,TR,CURUS,EAC Curve tolerance: ISO996:212 3B Pump version: A Model: A Materials: Pump housing: DIN W.-Nr Impeller: DIN W.-Nr AISI 34 Material code: I Rubber: EPDM Code for rubber: E Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 1 bar Max pressure at stated temperature: 1 bar / 4 C Flange standard: INTERNAL NPT THREAD Pump inlet: Pump outlet: Connect code: S Liquid: Pumped liquid: Water Liquid temperature range: C Liquid temperature during operation: 2 C Density: kg/m³ Kinematic viscosity: 1 mm²/s Electrical data: Motor type: 9C IE Efficiency class: IE5 Rated power - P2: 1.5 kw Main frequency: 6 Hz Rated voltage: 1 x 2-24 V Rated current: A Rated speed: 36-4 rpm Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 17.1 kg Gross weight: 2.6 kg Config. file no: H % 5 % CME3-7, 1*23 V Q = 1.59 m³/h H = 2.1 m n = 5 % / 1778 rpm Pumped liquid = Water Liquid temperature during operation = 2 C Density = kg/m³ eta [%] 1 Eff pump = 49.4 % 1 Eff pump + motor + freq. conv = 39.2 % Q [m³/h] P NPSH [kw] P1 (motor+freq.converter) Rp 3/ N L PE +24 V* +24 V* +24 V* OC DI GND +24 V*/5 V* 18.6 NC C1 NO NC C2 NO A Y B 3 P2 P1 (motor+freq.converter) =.221 kw P2 =.175 kw NPSH =.55 m N L DI3/OC1 AI1 DI1 +5 V GND GENIbus A GENIbus Y GENIbus B GND Rp 3/ V V +24 V* +24 V* +24 V*/5 V* +5 V* V 23 GND 25 GDS TX 24 GDS RX 7 AI2 Printed from Grundfos Product Center [ ] 9/17

10 CME3-7 A-S-I-E-AVBE 6 Hz Date: 9/24/217 cos phi eta CME C 1.5 kw 1*23 V, 6 Hz I [A] cos phi eta I P2 =.175 kw cos phi =.91 Eta = 79.3 % I = 1.6 A P2 [kw] n [rpm] P1 [kw] n 2. 1 P1 (motor+freq.converter) 1. P1 (motor+freq.converter) =.221 kw n = 5 % / 1778 rpm. Printed from Grundfos Product Center [ ] 1/17

11 CME3-7 A-S-I-E-AVBE 6 Hz Date: 9/24/ Rp 3/ Rp 3/ Note! All units are in [mm] unless otherwise stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos Product Center [ ] 11/17

12 CME3-7 A-S-I-E-AVBE 6 Hz Date: 9/24/217 N L PE N L NC C1 NO +24 V* OC DI GND NC C2 NO 1 4 DI3/OC1 AI1 +24 V* +24 V* +24 V*/5 V* 2 DI V 6 GND A GENIbus A Y GENIbus Y B GENIbus B 3 GND V V V 23 GND +24 V* +24 V* +24 V*/5 V* GDS TX GDS RX +5 V* 7 AI2 All units are [mm] unless otherwise presented. Printed from Grundfos Product Center [ ] 12/17

13 CME3-7 A-S-I-E-AVBE 6 Hz Input General Application Installation Flow Head Your requirements Dry running protection Adjustable pressure Compact installation Self-priming Automatic restart Domestic water supply Boost direct from main 1.59 m³/h 2 m No No No No No Operational conditions Frequency 6 Hz Phase 1 Ambient temperature 2 C Pump operating time 1 h/a Energy price.12 /kwh Increase of energy price 6 % Calculation period 1 years Load profile 1 Flow 1 % Head 1 % P1.221 kw Eff total 39.2 % Time 1 h/a Consumption 221 kwh/year Quantity 1 Date: 9/24/217 Sizing result Type CME3-7 Quantity * Motor 1 * 1.5 kw Flow 1.59 m³/h H total 2.1 m Power P1.221 kw Power P2.175 kw Eff pump 49.4 % Eff motor 79.3 % Eff pump+mtr 39.2 % =Eta pump * Eta motor Flow total 159 m³/year Consumption 221 kwh/year Price On request Life cycle cost /1Years H Eff pump = 49.4 % Eff pump + motor + freq. conv = 39.2 % Q [m³/h] P [kw] % 5 % CME3-7, 1*23 V Q = 1.59 m³/h H = 2.1 m n = 5 % / 1778 rpm Pumped liquid = Water Liquid temperature during operation = 2 C Density = kg/m³ eta [%] P1 (motor+freq.converter) P2 15 NPSH P1 (motor+freq.converter) =.221 kw P2 =.175 kw NPSH =.55 m 5 Printed from Grundfos Product Center [ ] 13/17

14 Installation and Input Total head: 2 m Date: 9/24/217 Sizing results Product number: On request Type: CME3-7 Installation type: DomBoostDirect Flow: 1.59 m³/h H total: 2.1 m Power P1:.221 kw Phase: 1 Voltage: 2-24 V Eff pump: 49.4 % Eff motor: 79.3 % Pump curve H % CME3-7, 1*23 V Q = 1.59 m³/h H = 2.1 m n = 5 % / 1778 rpm Pumped liquid = Water Liquid temperature during operation = 2 C Density = kg/m³ eta [%] Dimensional drawing Rp 3/ % Eff pump = 49.4 % Eff pump + motor + freq. conv = 39.2 % Q [m³/h] P [kw] 1 NPSH P1 (motor+freq.converter) P P1 (motor+freq.converter) =.221 kw P2 =.175 kw NPSH =.55 m 5 Rp 3/8 1.5 Printed from Grundfos Product Center [ ] 14/17

15 Installation illustration Total head: 2 m Date: 9/24/217 Printed from Grundfos Product Center [ ] 15/17

16 Zeta Values Date: 9/24/217 Printed from Grundfos Product Center [ ] 16/17

17 Order Data: Date: 9/24/217 Product name: CME3-7 A-S-I-E-AVBE Amount: 1 Product No.: On request Actual calculated flow: 1.59 m³/h Resulting head of the pump: 2.1 m Impellers: 7 Shaft seal: AVBE Pump housing material: DIN W.-Nr Impeller material: DIN W.-Nr Pump version: A Material code: I Code for rubber: E Pump inlet: Pump outlet: Flange standard: INTERNAL NPT THREAD Liquid max temp: 4 C Main frequency: 6 Hz Rated voltage: 1 x 2-24 V Rated power - P2: 1.5 kw Total: Price on request Printed from Grundfos Product Center [ ] 17/17