A l t r a I n d u s t r i a l M o t i o n. Universal Driveshafts for Irrigation Applications

Transcription

1 l t r a I n d u s t r i a l M o t i o n Universal Driveshafts for Irrigation pplications

2 meridrives I Universal Driveshafts for Irrigation pplications mericardan universal joints by meridrives are designed to provide long lasting performance in irrigation applications. mericardan irrigation universal joint driveshafts provide a cost effective means to transmit power from the engine to the pump or generator of an irrigation set. Installation time is reduced as the need for critical alignment tolerances required by other types of couplings is eliminated. The telescopic feature eliminates the need for movement of machinery for installation or maintenance removal. The telescopic feature also allows motion during operation or no-load conditions. This publication is a guide to available standard sizes and for identification purposes only. For new or redesigned applications please consult the factory for the appropriate selection. Heavy duty cross kits with needle rollers and multiple lip seals for long life High-strength alloy components arge diameter tubing insure lateral stability at high speed Industry Standard flange connections Elastomeric shaft seal keeps contaminants out and grease in to insure long service life Standard zerk type grease fittings at critical wear points Balanced for 1800 rpm operating speed Sealed nylon coated splined telescopic sections provide long service life with telescopic features 1 P-7629-C 3/18

3 Standard ength Driveshafts (S) S ll dimensions in inches unless noted. Standard length shafts are dynamically balanced. Non-standard lengths available, please call PT. Refer to guard information for proper safety shielding. PD OD Use shaft guards to help prevent serious injury to personnel. Model SF J1 Model SF Dimensions T tube F1 F2 G SERIES PRT # T S ENGTH TUBE SIP MX. 1 PD OD Style #1 Style #2 Style #3 +/- NGE WORKING NGE PIOT MX. SHFT DI. DI. 36 inches /1310 S31 x S 24,36, x º 1º to 8º lbs /1350 S37 x 24,36, x º 1º to 8º /1410 S41 x 24,36, x º 1º to 8º /1480 S48 x 24,36, x º 1º to 8º /1550 S55 x 24,36, x PD OD 22º 1º to 8º /1610 S61 x 24,36, x º 1º to 8º /1710 S71 x 24,36, x º 1º to 8º /1810 S81 x 36, x º 1º to 8º /1880 S88 x 36, x º 1º to 8º /1910 S91 x 36, x º 1º to 8º H E1 C B D E Shaft Guards Easily installed on new or existing installations. Slips easily over shaft and bolts to drive and driven machines. Rigid construction of heavy gauge, continuous milled, nonflaking steel. No lost time lubricating shaft. 2 wide opening runs full length of underside of guard. Use shaft guards to help prevent serious injury to personnel. SHFT GURD MODES ENGTHS VIBE DRIVESHFT SERIES SG to SG to SG to SG to SG to SG to Safety standards require that rotating driveshafts have proper shielding in place. Serious injury or death can result. DO NOT OPERTE equipment without safety shields installed on driveshafts. Warning stickers available through PT upon request. The majority of driveshaft related injuries occur when shielding is missing or has been omitted. It is imperative a guard is properly installed at each shaft location. P-7629-C 3/18 2

4 meridrives I Universal Driveshafts for Irrigation pplications Short Coupled Driveshafts (SC) + S OD PD Dimensions SERIES PRT # ENGTH S SIP +/- MX. NGE 1 WORKING NGE PD PIOT DI. OD MX. DI. SHFT WEIGHT 31 SC º 1º to 8º lbs. 37 SC º 1º to 8º SC º 1º to 8º SC º 1º to 8º SC º 1º to 5º SC º 1º to 8º SC º 1º to 8º SC º 1º to 8º SC º 1º to 8º SC º 1º to 8º ll dimensions in inches unless noted. Standard length shafts are dynamically balanced. Non-standard SC lengths available, please call PT. Refer to guard information for proper safety shielding. Driveshaft Bolt Kits (S & SC) SHFT SERIES Hardware Kit Use shaft guards to help prevent serious injury to personnel. 3 P-7629-C 3/18

5 Stock Bore Companion Flanges SF flanges denoted in bold type BORE KEYWY SF. Rough Bore / /8 1/ /4 1/ /4 5/ /8 5/ /8 3/ /16 3/ /2 3/ /8 3/ /16 3/ /4 3/ /4 1/ /8 3/ /8 1/ / /8 5/ /4 1/ /4 5/ /8 5/ /16 5/ /2 5/ /4 5/ /16 3/ / /2 7/ / SF. Rough Bore Hardware Kit Notes: 1. Finished Bore sizes nominal to Keyway per NSI Class I tolerance. 3. ll companion flanges provided with (1) setscrew over the keyway. 4. Popular sizes listed, please call for availability on other sizes. 5. Special bore or spline flanges quoted upon request. Use shaft guards to help prevent serious injury to personnel. P-7629-C 3/18 4

6 meridrives I Universal Driveshafts for Irrigation pplications Companion Flange Specifications Model SF J1 Model SF J2 H E1 C D B E2 C D B F1 G F2 Style #1 Style #2 Style #3 Style # SERIES Outside Diameter B-Bolt Circle C-Pilot Dia. (female) D-Pilot Depth MODE SF (STNDRD FNGE) E1-Maximum Bore F1-Maximum Keyway 3/8 x 3/16 1/2 x 1/4 5/8 x 5/16 3/4 x 3/8 1 x 1/2 1 x 1/2 1-1/8 x 9/16 G-Flange Width H-Hub Diameter J1-ength Rough Bore Dia pproximate Weight 3.14 # 4.25 # 8.61 # # # # # MODE SF (SPECI RGE FNGE) E2-Maximum Bore F2-Maximum Keyway 5/8 x 5/16 3/4 x 3/8 1 x 1/2 1-1/8 x 9/16 1-1/4 x 5/8 1-1/4 x 5/8 1-1/4 x 5/8 J2-ength Rough Bore Dia pproximate Weight 7.27 # # # # # # # BOT HOE SPCING Style # # 1 # 1 # 1 # 2 # 2 # 3 # 4 Number of Bolts Thread Size 3/8-24 7/ /2-20 3/8-24 3/8-24 7/ /8-18 Use shaft guards to help prevent serious injury to personnel. 5 P-7629-C 3/18

7 HP Ratings for Irrigation Shafts HP Ratings for Irrigation 10,000 hrs B-10* SERIES DIESE ENGINE GS ENGINE EECTRIC MOTOR 31/ / / / / / / / / / *HP ratings reflect 10,000 B-10 hrs with shaft driven at 1800 rpm s with the U-joints at 3 degree angle without a vibration dampener installed. Multiple Brands. Singular Commitment. ltra Couplings. The largest selection of industrial couplings from a single source...worldwide. For over 150 years, TB Wood s, meridrives, Bibby Turboflex, Huco, Guardian and amiflex, the industry-leading brands of ltra Couplings, have been providing innovative coupling solutions to meet the requirements of the iron and steel industries. Highly-engineered ltra coupling products represent the latest in coupling technology, featuring superior design and exceptional quality to ensure extremely reliable, long-lasting performance in all types of environments. ltra Couplings absorb all types of shock, vibration, misalignment and end float. Harness our combined engineering expertise for your next project. P-7629-C 3/18 6

8 meridrives Facilities North merica 1802 Pittsburgh venue Erie, P US Mill Spindles, merifl ex, meridisc, Universal Joints, Driveshafts, Mill Gear Couplings 2000 Clovis Barker Road San Marcos, TX US Gear Couplings, Small Industrial Driveshafts 300 Indiana Highway 212 Michigan City, IN Irrigation Universal Driveshafts The Brands of ltra Industrial Motion Couplings meridrives Bibby Turboflex ex.com Guardian Couplings Huco amiflex Couplings excouplings.com Stromag TB Wood s Geared Cam imit Switches Stromag Electric Clutches & Brakes Inertia Dynamics Matrix Stromag Warner Electric inear Products Warner inear Engineered Bearing ssemblies Kilian Heavy Duty Clutches & Brakes Industrial Clutch Twiflex ex.com Stromag Svendborg Brakes Wichita Clutch Belted Drives TB Wood s Gearing Bauer Gear Motor Boston Gear Delroyd Worm Gear Nuttall Gear Overrunning Clutches Formsprag Clutch Marland Clutch Stieber Neither the accuracy nor completeness of the information contained in this publication is guaranteed by the company and may be subject to change in its sole discretion. The operating and performance characteristics of these products may vary depending on the application, installation, operating conditions and environmental factors. The company s terms and conditions of sale can be viewed at These terms and conditions apply to any person who may buy, acquire or use a product referred to herein, including any person who buys from a licensed distributor of these branded products by meridrives C. ll rights reserved. ll trademarks in this publication are the sole and exclusive property of meridrives C or one of its affi liated companies. P-7629-C 3/18