USA - AIR TOOLS AIR POST DRIVERS. Rock Drilling & Mining Supplies

Transcription

1 CROWDER SUPPLY Rock Drilling & Mining Supplies Gas Powered Breakers/Drills Jack Leg Drills Compressors Drill Steel Tools for: Breakers Hammers Rivet Busters Pipe Drivers And more CROWDER PNEUMATICS Chicago Pneumatic Authorized Distributor Pneumatic Construction & Demolition Tools CROWDER HYDRAULIC CROWDER AIR TOOLS Atlas Copco Authorized Distributor Hydraulic & Pneumatic Construction & Demolition Tools American Pneumatic Tools Authorized Distributor Pneumatic Construction & Demolition Tools AIR POST DRIVERS USA - AIR TOOLS Rhino Post Drivers Authorized Distributor MADE IN U.S.A. Pneumatic Post Drivers Post Pulls Compressor Kits Texas Pneumatic Tools Authorized Distributor MADE IN U.S.A. Jet Fans, Air Movers Construction Tools

2 2 MINING AND CONSTRUCTION CONSUMABLES Crowder Supply Company Table of Contents Crowder Pneumatics Authorized Dealer of Chicago Pneumatic Tools and Parts Pneumatic Air Tools Authorized Dealer of American Pneumatic Tools and Parts Split Set Drivers 3 Paving Breakers 2 Rock Drills 2 Bolt Drivers Resin 5 Rivet Busters 5 Clay & Trench Diggers 3 Adapters Coupling, Bit Sleeve & Hole Saver 6 Sinker Drills 6 Paving Breakers 4 MAI & IBO Hollow Grout Rod & Swivels 7 Rock Drills 7 Rivet Busters 6 Tapered Drill Steel 8 Chipping Hammers 8 Chipping Hammers 7 Integral Drill Rod & Reaming Equipment 10 Pumps 11 Needle Scaler 8 H & D Thread Steel and Bits 11 Core Drills 12 Backfill Tamper 8 Rivet Buster Tools 13 Concrete Vibrator 12 Chipping Hammer Tools 14 Backfill Tamper 13 Air Post Drivers Authorized Dealer of Rhino Paving Breaker Tools 15 Scabbler 13 Tools and Parts Pipe Driving Tools 17 Picks & Clay Diggers 14 Carbide Tipped Whirlibits 18 Saw 15 Choosing a Driver 4 Threaded Steel & Bits Impact Wrenches 15 Post Drivers 7 1 Rope / R25 / 100 Rope 20 Red Hawk Gas Powered Tool 16 Accessories 9 1-1/4 Rope / R32 / 125 Rope 21 Crowder Hydraulics Kit Packages 10 Authorized Dealer of 1-1/2 Rope / R38 / 150 Rope 25 Atlas Copco Tools and Parts Post Pullers 12 T Hydraulic Tools USA Air Tools Authorized Dealer of Texas Pneumatic T Paving Breakers 2 Tools and Parts T Power Pacs & Accessories 4 Jet Fans 2 Striking Bars & Shank Adapters 25 Post Drivers 5 Water Driven Fans & Swing Gates 3 Betonomit Expansive Cracking Agent 26 Post Puller 6 Air Ducting & Air Receiver Tanks 4 Scaling Bars 26 Post Hole Borer 6 Air Movers 5 Air Hose and Couplings 27 Pick Hammers 7 Air Misters 6 Rock Drill Oil, Thread Lube and Line Oilers 27 Rock Drills 7 Air Manifolds 7 Darda Rock Splitters 28 Cut Off Saw 8 ASME Air Manifold 8 Mid-Western Jack Leg Drills & Feed Legs 30 Core Drill 8 Foundry Tools Rammers & Tampers 9 Cobra Combi Gas Power Breakers/Drills 32 Pump 8 Paving Breakers & Clay Diggers 10 Pneumatic Tools Chipping Hammers 11 Paving Breakers 10 Rock Drills 13 Rock Drills 12 Rivet Busters 14 CROWDER SUPPLY COMPANY INC 8495 Roslyn Street Commerce City, Colorado Phone: Fax: Stoper & Feed Leg Drills 14 Needle/Chisel Scaler, Long Reach Scaler 15 Pick Hammers 15 Piston Scaler 18 Chipping Hammers 16 Air Scribe 19 Rivet Busters 17 Retainers & Accessories 20 Pump 17 Filter-Regulator-Lubricator Systems 24 2 Backfill Tamper 18 Hose Whip Assemblies 29 Scaler 18 Hose Swivels & Couplings 31

3 MINING AND CONSTRUCTION CONSUMABLES 3 SPLIT SET DRIVERS 1-PIECE DRIVER SSD1PC 7/8 X 4-1/4-13"OAL $60.00 SSD1PC-B 7/8 X 4-1/4-13"OAL BULB NOSE SSD1PC33 7/8 X 4-1/4-13"OAL 33MM NOSE SSD1PC-88 1 X 4-1/4-13"OAL SSD1PC-18 7/8 X 4-1/4-18"OAL SSD1PC-24 7/8 X 4-1/4-24"OAL SSD1PC-30 7/8 X 4-1/4-30"OAL SSD1PC-30B 7/8 X 4-1/4-30"OAL BULB NOSE SSD1PC-36 7/8 X 4-1/4-36"OAL SSD7811 SSD SSD7812 SSD SSD8811 SSD8812 SSDR25F-B SSDR25S-F SSDR2533 SSDR32F-B SSDR32F-S SSDR3233 SSDR32F-10.7 SSDR32F-24 SSDR32F-30 SSDR32M-18 SSDR32F-S46 SPLIT SET DRIVER HEAD - TAPERED SOCKET 7/8 X 11 TAPER $ /8 X 11 TAPER, 33MM NOSE /8 X 12 TAPER /8 X 12 TAPER, 33MM NOSE X 11 TAPER X 12 TAPER SPLIT SET DRIVER HEAD - THREADED R25 FEMALE BULB NOSE $79.20 R25 FEMALE, STANDARD NOSE R25 FEMALE, 33MM NOSE R32 FEMALE, BULB NOSE R32 FEMALE, STANDARD NOSE R32 FEMALE, 33MM NOSE R32 FEMALE 12¼" OAL, 1½" NOSE R32 FEMALE 24"OAL Call R32 FEMALE 30"OAL Call R32 MALE 18"OAL 4"STD NOSE Call R32 FEMALE 46MM NOSE SSDR38M SSDR38F-10.7 SSDR38F-11.7 SSDR38F-13.7 SSDR38F-15.7 SSDR32F-20 SSDT38 SSDT38F-12.5 R38 MALE 8 ¼ OAL, 2 ¾ NOSE R38 FEMALE, 10 ¾ OAL, 1 ¾ NOSE R38 FEMALE, 11 ¾ OAL1 ¾ NOSE R38 FEMALE, 13 ¾ OAL1 ¾ NOSE R38 FEMALE, 15 ¾ OAL1 ¾ NOSE R38 FEMALE, 20 OAL, 2 ¾ NOSE T38 FEMALE T38MALE 12½"OAL - 1½" NOSE $

4 4 MINING AND CONSTRUCTION CONSUMABLES SPLIT SET DRIVERS 1 x 6 1/4 SHANK DRIVERS SPECIAL SSD X 6¼" - 15"OAL, 2¼" NOSE $ SSDT13 TAMROCK, SECOMA $ SSD X 6 ¼" - 15 ¾ OAL, 2 ½ NOSE SSD89-18 SSD89-18S 1 X 6 ¼" - 18"OAL, 2 ¾ NOSE 1 X 6 ¼" - 18"OAL, 4 STANDARD NOSE SSD-JH4-20 JH4, 503MM LONG SSD X 6¼" - 20"OAL, 2¾" NOSE Call SSD X 6 ¼" - 21 ¼ OAL, 2 ¾ NOSE SSD SSD X 6¼" - 21½"OAL, 2¼" NOSE 1 X 6 ¼ - 22 OAL, 1 ½ NOSE (6.25-I) Bolt spinners also available for Williams or Titan Rod SSD89-24 SSD X 6¼" - 24"OAL, 4" BULB NOSE 1 X 6 ¼ - 30 AOL, 4 STANDARD NOSE WE BUILD DRIVERS TO YOUR SPECIFICATIONS SSD X 6 ¼ 32 AOL, 4 STANDARD NOSE SSD89-40MC 1 X 6 ¼ 40 AOL, 4 BULLET NOSE SSD89-42MC 1 X 6 ¼ 42 AOL, 4 BULLET NOSE SPLIT SET See Specs on our Web Site SPLIT BOLTS 33MM 39MM 46MM Model SS " (33mm) Dia. Model SS " (39mm) Dia. Model SS " (46mm) Dia. 18" SS33-18 SS39-18 SS ' SS33-24 SS39-24 SS ' SS33-36 SS39-36 SS ' SS33-48 SS39-48 SS46-48 Also available in 4-1/4" shank length For threaded rather than oval socket add "T" to end of part # For 7/8 x 4-1/4 shank use NUT SPINNER Nut spinners are normally made to order. We need to know: 1. What is the drive end? Shank, Threaded, Square Impact Drive 2. What Size Nut you are Tightening? 3. How far down the bolt do you want to spin the nut, or the overall driver length? 5' SS33-60 SS39-60 SS ' SS33-72 SS39-72 SS ' SS33-96 SS39-96 SS ' SS SS SS ' SS SS SS PLATES SS-PLATE33 SS-PLATE39 SS-PLATE46 SPLIT BOLTS AVAILABLE GALVANIZED OTHER LENGTHS AVAILABLE Here are some samples of some common nut spinner we build: TT /8 x 3-1/4" x 22" OAL, 1-1/8" SQ TT /8 x 3-1/4" x 30" OAL, 1-1/8" SQ TT /8 x 3-1/4" x 36" OAL, 1-1/8" SQ TT /8 x 3-1/4" x 48" OAL, 1-1/8" SQ TT /8 x 3-1/4" x 22" OAL, 1-5/8" HEX TT X 6-1/4" X 25"OAL, 1-1/8" SQ TTR32F-7-16 DRIVER R32F X 16"OAL, 1-1/8" SQ TTR32F-8-21 DRIVER R32M X 21"OAL, 1-5/8" HEX TTR38F-8-13 DRIVER R38F x 13" OAL, 1-5/8" HEX $ Call Call Call Call 4

5 MINING AND CONSTRUCTION CONSUMABLES 5 Bolt Drivers - Resin DYWIDAG OVAL SOCKET SPINNER 7/8 X 3 1/4 1 x 3 1/4 R25 #6 DDY $ DDY $ DDYR25-6 #7 DDY DDY DDYR25-7 #8 DDY DDY DDYR25-8 #8 G150 DDY77-8HS DDY87-8HS DDYR25-8HS #9 DDY DDY DDYR25-9 #10 DDY DDY DDYR25-10 #11 DDY DDY DDYR /4" G150 DDY77-11HS DDY87-11HS DDYR25-11HS $ R32 R38 T38 T45 #6 DDYR25-6 $ DDYR38-6 $ DDYT38-6 $ DDYT45-6 #7 DDYR DDYR DDYT DDYT45-7 #8 DDYR DDYR DDYT DDYT45-8 #8 G150 DDYR32-8HS DDYR38-8HS DDYT38-8HS DDYT45-8HS #9 DDYR DDYR DDYT DDYT45-9 #10 DDYR DDYR DDYT DDYT45-10 #11 DDYR DDYR DDYT DDYT /4" G150 DDYR32-11HS DDYR38-11HS DDYT38-11HS DDYT45-11HS $ WE CAN BUILD IT Don t see what you need? Call us at ROOF BOLT DRIVER 1 1/8" SQUARE SOCKET 7/8" FEMALE DOLLY RBD77-10 ROOF BOLT DR 7/8 X 3 1/4 X 10" OAL $ /8 Hex Socket to Press on Tapered Steel RBD77-27 ROOF BOLT DR 7/8 X 3 1/4 X 27" OAL RBD77-48 ROOF BOLT DR 7/8 X 3 1/4 X 48" OAL DDY78HF-7 7/8 HEX FEMALE X #7 OVAL SOCKET $95.00 RBD78HF 7/8HEX FEMALE X 1 1/8" SOCKET DDY78HF-8 7/8 HEX FEMALE X #8 OVAL SOCKET

6 6 MINING AND CONSTRUCTION CONSUMABLES ADAPTERS COUPLING ADAPTERS CAR22-R25 R22/7/8 ROPE - R25/1 ROPE $75.00 CAR25-R28 R25/1 ROPE - R28/1-1/8 ROPE CAR25-R32 R25/1" ROPE - R32/1-1/4" ROPE CAR25-R38 R25/1" ROPE - R38/1-1/2" ROPE CAR25-T38 R25/1 " ROPE - T 38" CAR25-T45 R25/1" ROPE - T CAR28-R32 R28/1-1/8" ROPE - R32/1-1/4" ROPE CAR32-R38 R32/1-1/4" ROPE - R38/1-1/2 ROPE CAR32-R38SQ R32/1-1/4" ROPE - R38/1-1/2" ROPE W/ FLATS CAR32-R51 R32/1-1/4" ROPE - R51/2 ROPE CAR32-T38 R32/1-1/4" ROPE - T CAR32-T38SQ R32/1-1/4" ROPE - T 38 W/FLATS CAR32-T45 R32/1-1/4" ROPE - T CAR32-T51 1 1/4" ROPE - T CAR32-H55 R32/1-1/4" ROPE - H CAR38-R51 R38/1-1/2" ROPE - R51/ 2 ROPE CAR38-T38 R38/1-1/2" ROPE - T CAR38-T38SWF R38/1-1/2" ROPE - T 38 W/FLATS CAR38-T45 1 1/2" ROPE - T CAR38-H55 R38/1-1/2" ROPE - H CAT38-T45 T 38 - T CAT38-T51 T 38 - T CAT38-R51 T 38 - R51/ 2 ROPE CAT38-H55 T 38 - H CAT45-R51 T 45 - R51/ 2 ROPE CAT45-T51 T 45 T CAT45-H55 T 45 - H CAT51-T76 T51 T BAH-D BAR22-R25 BAR25-R38 BIT ADAPTERS H THD (FM) - D THD (M) R22/7/8" ROPE (FM) - R25/1" ROPE (M) R25/1" ROPE (FM) - R38/1-1/2" R (M) BAR25-R32 R25/1" ROPE (FM) - R32/1-1/4" R ( M) BAR25-R28 BAR BAR25-T38 BAR25-H BAR32-R28 R25/1" ROPE (FM) - R28/1-1/8" ROPE (M) R25/1" ROPE (M) - 7/8" 11º TAPER R25/1" ROPE (FM) - T 38 (M) R25/1" ROPE (FM) - H THD (M) R32/1-1/4" R (FM) - R28/1-1/8" R (M) BAR32-R25 R32/1-1/4" R (FM) - R25/1" ROPE ( M) BAR32-R38 BAR32-T38 BAR38-R32 BAR38-T38 BAR38-T45 R32/1-1/4" R (FM) - R38/1-1/2" R (M) R32/1-1/4" R (FM) - T 38 (M) R38/1-1/2" R (FM) - R32/1-1/4" R (M) R38/1-1/2" R (FM) - T 38 (M) R38/1-1/2" R (FM) - T 45 (M) BAR38-R51 R38/1-1/2" R (FM) - 2" ROPE M) BAT38-T45 BAT38-R32 BAR38-T45 BAT38-T51 BAT45-T51 BAT38M-R25M T 38 (FM) - R38/1-1/2" R (M) T 38 (FM) - R32/1-1/4" R (M) T 38 (FM) - T 45 (M) T38 (FM) - T 51 (M) T45 (FM) - T 51 (M) T38 (M) - R25/1" ROPE (M) DON T SEE WHAT YOU NEED NO WORRIES WE CAN BUILD IT Save Money Recover that expensive drill string Save that Hole! HOLE SAVER $ SLEEVE ADAPTERS HSBR25 BELL HOLE SAVER R25/1 ROPE $ BSR25-T38 R25/1 ROPE (FM) - T45 (M) $75.00 HSBR32 BELL HOLE SAVER R32/1-1/4 ROPE BSR25-T45 R25/1 ROPE (FM) - T45 (M) Call HSBT38 BELL HOLE SAVER T BSR25-T51 BSR32-T45 BSR32-T51 BSR38-T45 BSR38-T51 BST38-R51 BST38-T51 BST38-HL20 R25/1 ROPE (FM) - T45 (M) R32/1-1/4 ROPE (FM) - T45 (M) R32/1-1/4 ROPE (FM) - T51 (M) R38/1-1/2 ROPE (FM) - T45 (M) R38/1-1/2 ROPE (FM) - T51 (M) R38/1-1/2 ROPE (FM) - R51/2 ROPE (M) T 38 (FM) - T51 (M) T 38 (FM) - HL 2000 (M) Call Call HSBT45 BELL HOLE SAVER T 45 HSBT51 BELL HOLE SAVER T 51 HSSR25 SPEAR HOLE SAVER R25/1 ROPE HSSR32 SPEAR HOLE SAVER R32/1-1/4 ROPE HSST38 SPEAR HOLE SAVER T 38 HSST45 SPEAR HOLE SAVER T 45 HSST51 SPEAR HOLE SAVER T

7 MINING AND CONSTRUCTION CONSUMABLES MAI & IBO Hollow Grout Rod 7 MAI BITS Hardened Steel Soil Bits R32 R38 R51 2 IBOR32-BS51 $15.30 IBOR38-BS51 $ ½" IBOR32-BS IBOR38-BS " IBOR32-BS IBOR38-BS IBOR51-BS76 $ ½" IBOR32-BS IBOR38-BS IBOR51-BS " IBOR32-BS IBOR38-BS IBOR51-BS " *non stock-made to order Titan 30 & 40 bit also available Carbide Rock Bits R32 R38 R51 T76 2 IBOR32-BC51 $ ½" IBOR32-BC IBOR38-BC64 $ " IBOR32-BC IBOR38-BC IBOR51-BC76 $ ½" IBOR32-BC IBOR38-BC IBOR51-BC " IBOR32-BC IBOR38-BC IBOR51-BC IBOT76-BC102 5" IBOR32-BC IBOR38-BC IBO51-BC IBOT76-BC127 $ SMALL GROUT SWIVELS (MALE TO MALE) GROUT SWIVEL COMPLETE FLUSHING COLLAR JUNCTION BAR SEALS R32-1¼" ROPE GSR32 $ GSR32-FC $ GSR32-JB $ GSR32-S $13.50 R38-1½" ROPE GSR GSR38-FC GSR38-JB GSR38-S T38 GST GST38-FC GST38-JB GST38-S LARGE - GROUT SWIVELS (FEMALE-FEMALE) ROTOJEC SHANKS (JUNCTION BARS) RJ-T38-R32 ROTOJEC SHANK T38-R32 $ RJ-T38-R38 ROTOJEC SHANK T38-R38 $ RJ-T38-R51 ROTOJEC SHANK T38-R51 $ RJ-T45-R32 ROTOJEC SHANK T45-R32 $ RJ-T45-R38 ROTOJEC SHANK T45-R38 $ RJ-T45-R51 ROTOJEC SHANK T45-R51 $ RJ-T51-R32 ROTOJEC SHANK T51-R32 $ RJ-T51-R38 ROTOJEC SHANK T51-R38 $ RJ-T51-R51 ROTOJEC SHANK T51-R51 $ RJ-T51-T76 ROTOJEC SHANK T51-T76 $ RJ-H55-R32 ROTOJEC SHANK H55-R31 $ RJ-H55-R38 ROTOJEC SHANK H55-R38 $ RJ-H55-R51 ROTOJEC SHANK H55-R51 $ RJ-T38-T76 ROTOJEC SHANK H55-T76 $ GROUT BOTTLE Part # RJ-BODY $ SEALS Part # RJ-SEALS/DL $22.50 each Anchors see our website, for PDF spec sheets 7

8 8 MINING AND CONSTRUCTION CONSUMABLES Tapered Drill Steel & Bits 7/8 x 11 TAPERED 1 x 11 7/8 x 12 TAPERED STEEL 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 7/8 X 3¼ 7/8 X 4¼ 1' DS $61.60 DS $57.60 DS $69.60 DS $61.60 DS $ '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS ' DS DS DS DS DS '6 DS DS DS DS DS ' DS DS DS DS DS ' DS DS DS DS DS ' DS DS DS DS ' DS DS DS DS ' DS DS DS DS ' DS DS DS DS TAPER GAUGE TG711 TAPER GAUGE 7/8" X 11 TG811 TAPER GAUGE 1" X 11 TG712 TAPER GAUGE 7/8" X 12 TG812 TAPER GAUGE 1" X 12 $ NEED REPAIR? We can re-taper, unplug and straighten your steel. NEED SPECIAL LENGTH? We can cut and taper steel to any length. BIT SHELLS BR-BS REAMING BIT ADAPT 7/8" X 11 $46.66 BR-BS REAMING BIT ADAPT 7/8" X BR-BS REAMING BIT ADAPT1" X

9 MINING AND CONSTRUCTION CONSUMABLES 9 Tapered Drill Steel & Bits 7/8" x 11 SINGLE PASS 7/8" x 11 DEEP INSERT TB71125 TAPERED BIT 7/8 X 11 1" TB71128 TAPERED BIT 7/8 X /8" TB71132 TAPERED BIT 7/8 X /4" TB71135 TAPERED BIT 7/8 X /8" TB71138 TAPERED BIT 7/8 X /2" $ TB71135D TAPERED BIT 7/8 X /8" TB71138D TAPERED BIT 7/8 X /2" TB71141D TAPERED BIT 7/8 X /8" 1" x 11 SINGLE PASS $ TB71141 TAPERED BIT 7/8 X /8" TB81135 TAPERED BIT 1" X /8" $17.70 TB71145 TAPERED BIT 7/8 X /4" TB71148 TAPERED BIT 7/8 X /8" TB71151 TAPERED BIT 7/8 X 11 2" TB81138 TAPERED BIT 1" X /2" TB81141 TAPERED BIT 1" X /8" TB81145 TAPERED BIT 1" X /4" TB81151 TAPERED BIT 1" X 11 2" /8" x 12 DEEP INSERT TB71225 TAPERED BIT 7/8 X 12 1" $33.20 TB71235 TAPERED BIT 7/8 X /8" TB71238 TAPERED BIT 7/8 X /2" TB71241 TAPERED BIT 7/8 X /8" TB71245 TAPERED BIT 7/8 X /4" TB71251 TAPERED BIT 7/8 X 12 2" Call REAMING BITS BR22MM64 REAMING BIT BUTTON 2 ½" $ BR22MM76 REAMING BIT BUTTON 3" BR22MM89 REAMING BIT BUTTON 3 ½" BR22MM57-6W REAMING BIT 6-WING 2 ¼" BR22MM64-6W REAMING BIT 6-WING 2 ½" BR22MM76-6W REAMING BIT 6-WING 3" PROBLEM SOLVED! We specialize in the hard to find. Don t see what you need? We will find it! Can t find it? We will Build it! BIT KNOCKER Call us at BN78 BIT KNOCKER 7/8" $37.40 BN88 BIT KNOCKER 1" BIT ADAPTER BAR " ROPE TO 7/8 X 11 BAR /8" ROPE TO7/8 X 11 BAR " ROPE TO 1 X 12 $36.25 Call

10 10 MINING AND CONSTRUCTION CONSUMABLES Integral Drill Rod and Reaming Equipment 7/8" X 4¼ X SERIES 16 INT78S /8" X 4¼ X 2'0" X 1-3/8" BIT $ INT78S /8" X 4¼ X 3'11" X 1-11/32" BIT INT78S /8" X 4¼ X 5'11" X 1-19/64" BIT INT78S /8" X 4¼ X 7'10" X 1-1/4" BIT /8" X 4¼ X SERIES 17 INT78S /8" X 4¼ X 2'0" X 1-5/8" BIT $ INT78S /8" X 4¼ X 3'11" X 1-37/64" BIT INT78S /8" X 4¼ X 5'11" X 1-17/32" BIT INT78S /8" X 4¼ X 7'10" X 1-1/2" BIT AND 12 REAMING BUTTON BITS 6 (SMALL) 12 (LARGE) 2½" BR6DG64 $ " BR6DG ½" BR6DG BR12DG89 $ " BR6DG BR12DG /8" X 4¼ X SERIES 11 INT78S /8" X 4¼ X 2'7" X 1-11/32" BIT $ INT78S11-63 INT78S11-94 INT78S INT78S INT78S INT78S /8" X 4¼ X 5'3" X 1-19/64" BIT 7/8" X 4¼ X 7'10" X 1-1/4" BIT 7/8" X 4¼ X 10'6" X 1-7/32" BIT 7/8" X 4¼ X 13'1" X 1-3/16" BIT 7/8" X 4¼ X 15'9" X 1-9/64" BIT 7/8" X 4¼ X 18'4" X 1-7/64" BIT Call PR78-31 PR78-47 PILOT ROD 7/8" X 4¼ 12 Carbide Insert PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 2'7" PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 3,11" INT78S /8" X 4¼ X 21' X 1-9/16" BIT 7/8" X 4¼ X SERIES 12 Call PR78-63 PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 5'3" INT78S12-31 INT78S12-63 INT78S12-94 INT78S INT78S /8" X 4¼ X 2'7" X 1-37/64" BIT 7/8" X 4¼ X 5'3" X 1-17/32" BIT 7/8" X 4¼ X 7'10" X 1-1/2" BIT 7/8" X 4¼ X 10'6" X 1-23/64" BIT 7/8" X 4¼ X 13'1" X 1-27/36" BIT $ PR78-79 PR78-94 PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 6'7" PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 7'10" TAPERED BIT SHELLS 1" INTEGRAL DRILL RODS BR-BS REAMING BIT ADAPT 7/8" X 11 $46.66 INT88-24 INT " X 4¼ 1 x 4 1/4" x 2' X 1 3/4" BIT 1 x 4 1/4" x 4' X 1 22/32" BIT $ BR-BS REAMING BIT ADAPT 7/8" X 12 BR-BS REAMING BIT ADAPT 1" X INT x 4 1/4" x 6' X 1 11/18" BIT INT x 4 1/4" x 8' X 1 21/32" BIT THREADED PILOT ADAPTERS REAMING BITS BUTTON BIT 6 - WING 2¼" BR22MM57 $ BR22MM57C $ ½" BR22MM BR22MM67C (SMALL) 12 (LARGE) 1" ROPE (R25) BR-PAR25-6 $ BR-PAR25-12 $ ¼" ROPE (R32) BR-PAR BR-PAR32-12 $ ¾" BR22MM70 Call BR22MM70C Call 3" BR22MM BR22MM76C ½" BR22MM BR22MM89C

11 MINING AND CONSTRUCTION CONSUMABLES 11 H & D STEEL and BITS H THREAD STEEL (Shank Size) Length 3/4 X 4¼ PRICE 7/8 X 3¼ PRICE 7/8 X 4¼ PRICE 1 X 4¼ PRICE 1' DS68H-12 $56.40 DS77H-12 $56.40 DS78H-12 $56.40 DS88H-12 $ ½' DS68H-18 $61.70 DS77H-18 $61.70 DS78H-18 $61.70 DS88H-18 $ ' DS68H-24 $ DS77H-24 $64.80 DS78H-24 $64.80 DS88H-24 $ ½' DS77H-30 $69.80 DS78H-30 $69.80 DS88H-30 $ ' DS77H-36 $76.90 DS78H-36 $76.90 DS88H-36 $ ' DS77H-48 $85.60 DS78H-48 $85.60 DS88H-48 $ ' DS77H-60 $97.00 DS78H-60 $97.00 DS88H-60 $ ' DS77H-72 $ DS78H-72 $ DS88H-72 $ ' DS77H-96 $ DS78H-96 $ DS88H-96 $ ' DS77H-120 $ DS78H-120 $ DS88H-120 $ ' DS77H-144 $ DS78H-144 $ DS88H-144 $ D THREAD STEEL (Shank Size) Length 3/4 X 4¼ PRICE 7/8 X 3¼ PRICE 7/8 X 4¼ PRICE 1 X 4¼ PRICE 1' DS68D-12 $87.50 DS77D-12 $87.50 DS78D-12 $87.50 DS88D-12 $ ½' DS68D-18 $95.90 SA77D-18 $95.90 DS78D-18 $95.90 DS88D-18 $ ' DS68D-24 $ DS77D-24 $ DS78D-24 $ DS88D-24 $ ½' DS88D-30 $ ACCESSORIES - BIT ADAPTERS 3' DS88D-36 $ ' BAH-D H THD (FM) - D THD (MALE) $41.20 DS88D-48 $ ' CPLH H THD COUPLING $23.30 DS88D-60 $ ' BAR25-H 1" ROPE (FM) - H THD (MALE) $65.00 DS88D-72 $ BAR25-D 1" ROPE (FM) - D THE (MALE) $

12 12 MINING AND CONSTRUCTION CONSUMABLES H & D STEEL and BITS CARBIDE CROSS BIT BUTTON BIT Bit Diam. H-THREAD PRICE D-THREAD PRICE H-THREAD PRICE 1-3/8" BCH35 $39.20 BCD35 BBH35 $ /2" BCH38 $43.10 BCD38 BBH38 $ /8" BCH41 $52.10 BCD41 BBH41 $ /4" BCH45 $56.80 BCD45 $71.00 BBH45 $ /8" BCH48 $62.90 BCD48 $79.00 BBH48 $ " BCH51 $67.20 BCD51 $75.40 BBH51 $ /4" BCH57 $77.70 BCD57 $80.00 BBH57 $ /8" BCH60 $ BCD60 $ /2" BCH64 $ BCD64 $96.00 BBH64 $ /8" BCH67 $ BCD67 Call 2-3/4" BCH70 $ BCD70 $ " BCH76 $ BCD76 $ ALL STEEL BITS CARBIDE SHALLOW INSERT Bit Diam. H-THREAD PRICE D-THREAD PRICE H-THREAD PRICE 1-3/8" BSH35 $7.65 BCH35S $ /2" BSH38 $7.65 BSH38S $ /8" BSH41 $8.15 BSH41S $ /4" BSH45 $8.15 BSD45 $10.45 BCH45S $ /8" BSH48 $8.50 BSD48 $ " BSH51 $8.50 BSD51 $10.60 BCH51S $ /4" BSH57 $9.40 BSD57 $ /2" BSH64 $11.10 BSD64 $ /8" BSH67 $ /4" BSD70 $ " BSD76 $ /4 BSD89 $ /2 BSD92 $ BSD102 $

13 MINING AND CONSTRUCTION CONSUMABLES 13 RIVET BUSTER TOOLS STANDARD 80X JUMBO 11X Working End Rivet Size Part No. Length Price Part No. Length Price Blank RB80X-BLK $16.70 RB11X-BLK $19.50 Point RB80X-MP RB11X-MP RB80X-MP RB11X-MP RB80X-MP RB11X-MP Narrow Chisel RB80X-NC RB11X-NC RB80X-NC RB11X-NC RB80X-NC RB11X-NC Side Cut Chisel RB80X-SC RB11X-SC RB80X-SC RB11X-SC RB80X-SC RB11X-SC Ripper Non-Spark RB11X-RIP-9BC Back Out Punches 3/8 RB80X-BP RB11X-BP /2 RB80X-BP RB11X-BP /4 RB80X-BP RB11X-BP /8 RB80X-BP RB11X-BP Clear ance Tube Size Gauge Heat Exchanger Punches 4 3/4 12ga RB11X-HP ga RB11X-HP /4 12ga RB11X-HP /4 14ga RB11X-HP ga RB11X-HP /4 12ga RB11X-HP /4 14ga RB11X-HP We Carry Pneumatic & Hydraulic Rivet Buster Tools! Check Our Web Sites: CrowderAirTools.com (APT tools) CrowderPneumatics.com (CP tools) CrowderHydraulicTools.com (Atlas Copco) 13

14 14 MINING AND CONSTRUCTION CONSUMABLES Chipping Hammer Tools BLANK ROUND SHANK Oval Collar ROUND SHANK Oval Collar HEX SHANK Oval Collar HEX SHANK Round Collar PRICE 8½ CH680-BLK-8 CH680R-BLK-8 CH580-BLK-8 CH580R-BLK-8 $ /2 CH680-BLK-11 CH680R-BLK-11 CH580-BLK-11 CH580R-BLK-11 $13.90 MOIL POINT NARROW CHISEL 9" CH680-MP-9 CH680R-MP-9 CH580-MP-9 CH580R-MP-9 $ " CH680-MP-11 CH680R-MP-11 CH580-MP-11 CH580R-MP-11 $ " CH680-MP-18 CH680R-MP-18 CH580-MP-18 CH580R-MP-18 $ " CH680-MP-24 CH680R-MP-24 CH580-MP-24 CH580R-MP-24 $ " CH680-MP-36 CH680R-MP-36 CH580-MP-36 CH580R-MP-36 $ " CH680-MP-48 CH680R-MP-48 CH580-MP-48 CH580R-MP-48 $ " CH680-MP-60 CH680R-MP-60 CH580-MP-60 CH580R-MP-60 $ " CH680-MP-72 CH680R-MP-72 CH580-MP-72 CH580R-MP-72 $ " CH680-NC-9 CH680R-NC-9 CH580-NC-9 CH580R-NC-9 $ " CH680-NC-12 CH680R-NC-12 CH580-NC-12 CH580R-NC-12 $ " CH680-NC-18 CH680R-NC-18 CH580-NC-18 CH580R-NC-18 $ " CH680-NC-24 CH680R-NC-24 CH580-NC-24 CH580R-NC-24 $ " CH680-NC-36 CH680R-NC-36 CH580-NC-36 CH580R-NC-36 $ " CH680-NC-48 CH680R-NC-48 CH580-NC-48 CH580R-NC-48 $ " CH680-NC-60 CH680R-NC-60 CH580-NC-60 CH580R-NC-60 $ " CH680-NC-72 CH680R-NC-72 CH580-NC-72 CH580R-NC-72 $ /2 CHISEL 9" CH680-C38-9 CH680R-C38-9 CH580-C38-9 CH580R-C38-9 $ " CH680-C38-12 CH680R-C38-12 CH580-C38-12 CH580R-C38-12 $ " CH680-C38-18 CH680R-C38-18 CH580-C38-18 CH580R-C38-18 $ CHISEL 9" CH680-C51-9 CH680R-C51-9 CH580-C51-9 CH580R-C51-9 $ " CH680-C51-12 CH680R-C51-12 CH580-C51-12 CH580R-C51-12 $ " CH680-C51-18 CH680R-C51-18 CH580-C51-18 CH580R-C51-18 $ /2 CHISEL 9" CH680-C64-9 CH680R-C64-9 CH580-C64-9 CH580R-C64-9 $ CHISEL 12 CH680-C64-12 CH680R-C64-12 CH580-C64-12 CH580R-C64-12 $ CH680-C64-18 CH680R-C64-18 CH580-C64-18 CH580R-C64-18 $ " CH680-C76-9 CH680R-C76-9 CH580-C76-9 CH580R-C76-9 $ " CH680-C76-12 CH680R-C76-12 CH580-C76-12 CH580R-C76-12 $ " CH680-C76-18 CH680R-C76-18 CH580-C76-18 CH580R-C76-18 CALL BUSHING TOOLS 1-PIECE CH680-BH-1PC CH680R-BH-1PC CH580-BH-1PC CH580R-BH-1PC $57.70 CARBIDE INSERTED CH680-BH-CARBIDE CH680R-BH-CARBIDE CH580-BH-CARBIDE CH580R-BH-CARBIDE $ Chipping Hammers and Parts Available We Carry Chipping Hammers Check Our Web Sites: CrowderAirTools.com CrowderPneumatics.com CrowderHydraulicTools.com 14

15 MINING AND CONSTRUCTION CONSUMABLES 15 PAVING BREAKER TOOLS Shank Size / Len MOIL POINT NARROW CHISEL PRICE 3" CHISEL PRICE 7/8" X 3-1/4" 14" PB77-MP-14 PB77-NC-14 $ PB77-3C-14 $ " PB77-MP-18 PB77-NC-18 $ PB77-3C-18 $ /8" X 4-1/4" 24" PB77-MP-24 PB77-NC-24 $ PB77-3C-24 $ " PB77-MP-36 PB77-NC-36 $ PB77-3C-36 $ " X 4-1/4" 14" PB88-MP-14 PB88-NC-14 $ PB88-3C-14 $ " PB88-MP-18 PB88-NC-18 $ PB88-3C-18 $ " PB88-MP-24 PB88-NC-24 $ PB88-3C-24 $ " PB88-MP-36 PB88-NC-36 $ PB88-3C-36 $ " PB88-MP-48 PB88-NC-48 $ PB88-3C-48 $ " PB88-MP-60 PB88-NC-60 $ PB88-3C-60 $ " PB88-MP-72 PB88-NC-72 $ PB88-3C-72 $ /8" X 6" 14" PB98-MP-14 PB98-NC-14 $ PB98-3C-14 $ " PB98-MP-18 PB98-NC-18 $ PB98-3C-18 $ " PB98-MP-24 PB98-NC-24 $ PB98-3C-24 $ " PB98-MP-36 PB98-NC-36 $ PB98-3C-36 $ " PB98-MP-48 PB98-NC-48 $ PB98-3C-48 $ " PB98-MP-60 PB98-NC-60 $ PB98-3C-60 $ " PB98-MP-72 PB98-NC-72 $ PB98-3C-72 $ /4" X 6" 14" PB108-MP-14 PB108-NC-14 $ PB108-3C-14 $ " PB108-MP-18 PB108-NC-18 $ PB108-3C-18 $ " PB108-MP-24 PB108-NC-24 $ PB108-3C-24 $ " PB108-MP-36 PB108-NC-36 $ PB108-3C-36 $ " PB108-MP-48 PB108-NC-48 $ PB108-3C-48 $ " PB108-MP-60 PB108-NC-60 $ PB108-3C-60 $ " PB108-MP-72 PB108-NC-72 $ PB108-3C-72 $ Shank Size ASPHALT CUTTER PRICE BRUSHING TOOL PRICE 7/8" X 2-3/4" PB77-BH $ /8" X 3-1/4" PB77-AC $76.70 PB78-BH $ /8" X 4-1/4" PB78-AC $ " X 4-1/4" PB88-AC $76.70 PB88-BH $ /8" X 6" PB98-AC $78.10 PB98-BH $ /4" X 6" PB109-AC $80.90 PB109-BH $

16 16 MINING AND CONSTRUCTION CONSUMABLES PAVING BREAKER TOOLS Shank Size PRICE Shank Size DIGGING CHISEL PRICE 1-1/8" X 6" PB77-DC $ /4" X 6" PB78-DC $93.90 PB88-DC $85.40 PB98-DC $89.20 PB109-DC $92.30 ASPHALT WEDGE 1" X 4-1/4" PB88-AW 1-1/8" X 6" PB98-AW 1-1/4" X 6" PB108-AW $75.20 $76.40 $83.50 Shank Size CONCRETE BREAKER PRICE Shank Size 1" X 4-1/4" PB88-FW 1-1/8" X 6" PB98-FW 1-1/4" X 6" PB108-FW FROST WEDGE PRICE $93.20 $93.20 $93.20 Shank Size Blade CLAY SPADE PRICE 7/8" X 3-1/4" 4-1/2" PB77-CS-4.5 $ /2" PB77-CS-5.5 $ /8" X 4-1/4" 5-1/2" PB78-CS-5.5 $ " X 4-1/4" 4-1/2" PB88-CS-4.5 $ /2" PB88-CS-5.5 $ /8" X 6" 4-1/2" PB98-CS-4.5 $ /2" PB98-CS-5.5 $ /4" X 6" 4-1/2" PB109-CS-4.5 $ /2" PB109-CS-5.5 $ Shank Size 1-1/8" X 6" 1-1/4" X 6" Hole Size Unit PLUG AND FEATHERS SET PRICE 1-1/2" Shank PB98-SHK-150 $ Feathers PB98-FTH-150 $ " Shank PB98-SHK-200 $ Feathers PB98-FTH-200 $ /2" Shank PB108-SHK-150 $ Feathers PB108-FTH-150 $ " Shank PB108-SHK-200 $ Feathers PB108-FTH-200 $ " X 4-1/4" PB88-CB 1-1/8" X 6" PB98-CB 1-1/4" X 6" PB108-CB Shank Size 7/8" X 3-1/4" 1" X 4-1/4" 1-1/8" X 6" 1-1/4" X 6" Rod Size Socket Size GROUND ROD DRIVER PRICE 5/8" 11/16" PB77-GR-625 $ /4" 13/16" PB77-GR-750 $ /8" 11/16" PB88-GR-625 $ /4" 13/16" PB88-GR-750 $ /8" 15/16" PB88-GR-875 $ " 1-1/16" PB88-GR-100 $ /8" 11/16" PB98-GR-625 $ /4" 13/16" PB98-GR-750 $ /8" 15/16" PB98-GR-875 $ " 1-1/16" PB98-GR-100 $ /8" 11/16" PB108-GR-625 $ /4" 13/16" PB108-GR-750 $ /8" 15/16" PB108-GR-875 $ " 1-1/16" PB108-GR-100 $98.20 $99.80 $ $ TARMAC CUTTER Shank Size Blade (10-1/2" under collar) PRICE 1-1/8" X 6" 4-1/2" PB98-TC $ /4" X 6" 4-1/2" PB108-TC $

17 MINING AND CONSTRUCTION CONSUMABLES 17 PIPE DRIVING TOOLS Shank Size DETACHABLE SHANK PRICE 7/8" X 3-1/4" Small Taper PB77-DS-ST $60.90 Large Taper PB77-DS $ /8" X 4-1/4" Small Taper PB78-DS-ST $60.90 Large Taper PB78-DS $ " X 4-1/4" Small Taper PB88-DS-ST $60.90 Large Taper PB88-DS $ /8" X 6" Large Taper PB98-DS $ /4" X 6" Large Taper PB108-DS $60.90 Shank Size U-CHANNEL & PIPE DRIVERS PRICE 7/8" x 4-1/4" Shank only PD78-PIPE $ x 4-1/4" Shank only PD88-PIPE $ /8" X 6" Shank only PD98-PIPE $ /4" X 6" Shank only PD108-PIPE $85.00 CUP Cup only 2-5/8 ID PD-PIPE-CUP $ Pin Driver Working End 1 x 4-1/4 Hex 1-1/8 x 6 Hex 1-1/4 x 6 Hex 5/8 PB88-PD625 $84.90 PB98-PD625 $89.30 PB108-PD625 $ /4 PB88-PD PB98-PD PB108-PD /8 PB88-PD PB98-PD PB108-PD PB88-PD PB98-PD PB108-PD /4 PB88-PD PB98-PD PB108-PD /2 PB88-PD PB98-PD PB108-PD /4 PB88-PD PB98-PD PB108-PD PB88-PD PB98-PD PB108-PD /2 PB88-PD PB98-PD PB108-PD Type ROUND PIPE DRIV- ERS (for large taper shank) Use with Detachable Shank PRICE 1-1/4 Cup PD-LT-32CUP $ /2 CUP PD-LT-38CUP $ /2" 3 " Pin PD-LT-51PIN $92.50 Cup PD-LT-51CUP $92.50 Pin PD-LT-64PIN $92.50 Cup PD-LT-64CUP $92.50 Pin PD-LT-76PIN $ Cup PD-LT-76CUP $ Pad Size TAMPING PADS PRICE 6 " Round PB-TAMP-LT-6RD $ Square PB-TAMP-LT-6SQ $ " Round PB-TAMP-LT-7RD $ " Square PB-TAMP-LT-8S $ Size SQUARE POST DRIVERS Use with Detachable Shank PRICE 1-1/2 " Large Taper PD-LT-38SQ $ /4" Large Taper PD-LT-45SQ $ " Large Taper PD-LT-51SQ $ /4" Large Taper PD-LT-57SQ $ /2" Large Taper PD-LT-64SQ $

18 18 MINING AND CONSTRUCTION CONSUMABLES Carbide Tipped Whirly Bit Dril SHANK SIZE SHANK SIZE l Bit 7/8" X 3¼" 7/8" X 4¼ PRICE 6" 5/8" WB WB $ " 5/8" WB WB $ " 5/8" WB WB $ " 5/8" WB WB $ " 3/4" WB WB $ " 3/4" WB WB $ " 3/4" WB WB $ " 3/4" WB WB $ " 3/4" WB WB $ " 7/8" WB WB $ " 7/8" WB WB $ " 7/8" WB WB $ " 7/8" WB WB $ " 7/8" WB WB $ " 1" WB WB Call 9" 1" WB WB $ " 1" WB WB $ " 1" WB WB $ " 1" WB WB $ " 1-1/8" WB WB $ " 1-1/8" WB WB $ " 1-1/8" WB WB $ " 1-1/8" WB WB $ " 1-1/4" WB WB $ " 1-1/4" WB WB $ " 1-1/4" WB WB $ " 1-1/4" WB WB $ " 1-3/8" WB WB $ " 1-3/8" WB WB $ " 1-3/8" WB WB $ " 1-3/8" WB WB $ " 1-1/2" WB WB $ " 1-1/2" WB WB $ " 1-1/2" WB WB $ " 1-1/2" WB WB $ Drill Bit C-9 Whilibits PRICE 8" 1/2" WBCP $ " 1/2" WBCP $ " 5/8" WBCP $ " 5/8" WBCP $ " 5/8" WBCP $ " 3/4" WBCP $ " 3/4" WBCP $ " 3/4" WBCP $ " 7/8" WBCP $ " 7/8" WBCP $ " 7/8" WBCP $ " 1" WBCP $ " 1" WBCP $ " 1" WBCP $ " 1" WBCBCP $ " 1-1/8" WBC $ " 1-1/8" WBCP $ " 1-1/8" WBCP $ " 1-1/4" WBCP $ " 1-1/4" WBCP $ " 1-1/4" WBCP $ " 1-3/8" WBCP $ " 1-3/8" WBCP $ " 1-3/8" WBCP $ " 1-1/2" WBCP $ " 1-1/2" WBCP $ " 1-1/2" WBCP $

19 MINING AND CONSTRUCTION CONSUMABLES 19 Carbide Tipped Whirly Bit Drill Bit SHANK SIZE 1" X 4¼" PRICE SHANK SIZE 3/4" X 3 1/4" PRICE SHANK SIZE 3/4" X 4 1/4" PRICE 6" 5/8" WB Call WB Call 6" 3/4" WB Call WB Call WB Call 9" 3/4" WB $ " 3/4" WB Call 14" 3/4" WB $ " 3/4" WB Call 20" 3/4" WB $ " 3/4" WB $ WB Call 6" 7/8" WB $ WB Call WB Call 8" 7/8" 9" 7/8" WB $ " 7/8" 14" 7/8" WB $ " 7/8" 20" 7/8" WB $ " 7/8" WB $ " 1" WB Call WB Call 8" 1" 9" 1" WB $ WB Call 12" 1" 14" 1" WB $ " 1" 20" 1" WB $ " 1" 26" 1" WB $ " 1-1/8" WB Call WB Call 9" 1-1/8" WB $ " 1-1/8" 14" 1-1/8" WB $ " 1-1/8" 20" 1-1/8" WB $ " 1-1/8" WB $ " 1-1/4" 9" 1-1/4" WB $ " 1-1/4" 14" 1-1/4" WB $ " 1-1/4" 20" 1-1/4" WB $ " 1-1/4" WB $ " 1-3/8" 9" 1-3/8" WB $ " 1-3/8" 14" 1-3/8" WB $ " 1-3/8" 20" 1-3/8" WB $ " 1-3/8" WB $ " 1-1/2" 9" 1-1/2" WB $ " 1-1/2" 14" 1-1/2" WB $ " 1-1/2" 20" 1-1/2" WB $ " 1-1/2" WB $ Drill Bit U7 Whirlibits PRICE 8" 1/2" WBU $ " 1/2" WBU $ " 5/8" WBU $ " 5/8" WBU $ " 3/4" WBU $ " 3/4" WBU $ " 7/8" WBU WB Call $ " 7/8" WBU $ " 1" WBU $ " 1" WBU $ " 1-1/8" WBU $ " 1-1/8" WBU $ " 1-1/4" WBU $ " 1-1/4" WBU $

20 20 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits 1" ROPE - R ROPE EXTENSION ROD SHANKED ROD 7/8" HEX 1" HEX 7/8 X 4 1/4 1 X 4 1/4 12" ER25-22H-12 $58.00 ER25-25H-12 Call DS78R25-12 $83.10 DS88R25-12 $ " ER25-22H ER25-25H-18 Call DS78R DS88R ' ER25-22H ER25-25H-24 Call DS78R DS88R DS78R DS88R DS78R DS88R ' ER25-22H ER25-25H DS78R DS88R ' ER25-22H ER25-25H DS78R DS88R ' ER25-22H ER25-25H DS78R DS88R ' ER25-22H ER25-25H DS78R DS88R ' ER25-22H ER25-25H-144 Call DS78R DS88R ROCK BITS COUPLING CROSS BIT BUTTON BIT REAMING BIT CPLR25 1" ROPE COUPLING 1-1/2 OD $ /8" BCR2535 $52.80 BBR2535 $ /2" BCR BBR /8" BCR BBR /4" BCR BBR /8" BCR BBR " BCR BBR /4" BCR BBR /2" BCR BBR BRR2564 Call 3" BCR BBR BRR2576 Call 3 1/2" BRR2589 Call 4" BRR25102 Call ADAPTERS CAR22-R25 7/8" ROPE - 1" ROPE CAR25-R28 1" ROPE - 1 1/8" ROPE CAR25-R32 1" ROPE - 1 1/4" ROPE CAR25-R38 1" ROPE - 1 1/2" ROPE CAR25-T38 1 " ROPE - T 38 CAR25-T45 1" ROPE - T45 BAR25-R38 1" ROPE (FM) - 1 1/2" ROPE (M) BAR25-R32 1" ROPE (FM) - 1 1/4" ROPE( M) BAR25-R28 1" ROPE (FM) - 1 1/8" ROPE (M) BAR " ROPE (M) - 7/8" 11 TAPER BAR25-T38 1" ROPE (FM) - T 38 (M) BAR25-H 1" ROPE (FM) - H THD (M) $ Button Types - Round, Conical, Ballistic, Parabolic. HOLE SAVER Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. HSBR25 HSSR25 BELL HOLE SAVER 1" ROPE SPEAR HOLE SAVER 1" ROPE $

21 MINING AND CONSTRUCTION CONSUMABLES 21 1 ¼" ROUND Single Thread 1 ¼" ROUND Double Thread EXTENSION ROD 1" HEX 1 ¼" ROUND Male - Female 2' ER32-32R-24 $ ER32-25H-24 $ ' ER32-32R ' ER32-32R ER32-25H ER32-32R-51MF $ ' ER32-32R-63MF ' ER32-32R ER32-25H ER32-32R-75MF ' ER32-32R ER32-25H ER32-32R-99MF ' ER32-32R ER32-32R-120 $ ER32-25H ER32-32R-123MF ' ER32-32R ER32-32R ER32-32R-147MF ' ER32-32R ER32-32R SHANKED ROD 18" 7/8 X 4 1/4 1 X 4 1/4 2' DS78R32-18 $ DS88R32-18 $ DS78R DS88R ' DS78R DS88R ' DS78R DS88R ' DS78R DS88R ' DS88R ' DS88R ' DS88R HSBR32 HSSR32 HOLE SAVER BELL HOLE SAVER 1¼" ROPE SPEAR HOLE SAVER 1¼" ROPE $ Threaded Steel & Bits 1 ¼" ROPE - R ROPE BAR32-R28 ADAPTERS 1 1/4" R (FM) - 1 1/8" R (M) BAR32-R25 1 1/4" ROPE (FM) - 1" ROPE( M) BAR32-R38 BAR32-T38 BAR38-R32 CAR25-R32 CAR28-R32 CAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) 1 1/4" ROPE (FM) - T 38 (M) 1 1/2" R (FM) - 1 1/4" R (M) 1" ROPE - 1 1/4" ROPE 1 1/8" ROPE - 1 1/4" ROPE 1 1/4" ROPE - 1 1/2 ROPE CAR32-T38 1 1/4" ROPE - T 38 CAR32-T45 CAR32-T51 COUPLING CPLR32 1¼" ROPE COUPLING $ /4" ROPE - T45 1 1/4" ROPE - T51 $ ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS REAMING BITS 1 1/2" BCR3238 $62.00 BBR3238 $ /8" BCR BBR /4" BCR BBR BBR3245RT Call 1 7/8" BCR BBR BBR3248RT Call 2" BCR BBR BBR3250RT $ /4" BCR BBR BBR3257RT Call 2 1/2" BCR BBR BBR3264RT " BCR BBR BBR3276RT BRR3276 $ /2" BCR BBR BRR " BCR BBR BRR /2" BRR " BRR Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. 21

22 22 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits T38 1½" ROUND Single Thread 1½" ROUND Double Thread EXTENSION ROD 1½" ROUND ALL THREAD 1½" ROUND Male - Female 4' ET38-38R-52MF $ ' ET38-38R-64MF ' ET38-38R-72 $ ET38-38R-76MF ' ET38-38R ET38-96AT $ ET38-38R-96MF ' ET38-38R ET38-38R-120T $ ET38-38R120AT ET38-38R-124MF ' ET38-38R ET38-38R-144T ET38-38R-144AT ET38-38R-148MF ' ET38-38R ET38-38R-168T ET38-38R-168AT ET38-38R-168MF ' ET38-38R ET38-38R-192T ' ET38-38R ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/4" BCT3857 $ BBT3857 $87.30 BBT3857RT $ /2" BCT BBT BBT3864RT /4" BCT BBT BBT3870RT " BCT BBT BBT3876RT /2" BCT BBT BBT3889RT REAMING BITS 4" BCT BBT BBT38102RT BRT38102 $ /2" BBT38115 Call BRT " BBT BRT /2" BBT " BRT Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. STRIKING BAR 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 1 X 6¼ SB77T38 SB78T38 SB88T38 SB89T38 BAR32-R28 ADAPTERS 1 1/4" R (FM) - 1 1/8" R (M) BAR32-R25 1 1/4" ROPE (FM) - 1" ROPE( M) $ $95.00 $95.00 $ $ BAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) BAR32-T38 1 1/4" ROPE (FM) - T 38 (M) COUPLING BAR38-R32 1 1/2" R (FM) - 1 1/4" R (M) CPLT38 T38 COUPLING $56.20 CAR25-R32 1" ROPE - 1 1/4" ROPE CAR28-R32 1 1/8" ROPE - 1 1/4" ROPE HSBT38 HSST38 HOLE SAVER BELL HOLE SAVER T38 SPEAR HOLE SAVER T38 $ $ CAR32-R38 1 1/4" ROPE - 1 1/2 ROPE CAR32-T38 1 1/4" ROPE - T 38 CAR32-T45 1 1/4" ROPE - T45 CAR32-T51 1 1/4" ROPE - T

23 MINING AND CONSTRUCTION CONSUMABLES 23 Threaded Steel & Bits T45 1¾" ROUND Single Thread 6' ET45-45R-72 $ ' ET45-45R EXTENSION ROD 1¾" ROUND Double Thread 1¾" ROUND All Thread 10' ET45-45R ET45-45R-120T $ ET45-45R-120AT $ ' ET45-45R ET45-45R-144T ET45-45R-144AT ' ET45-45R ET45-45R-168T ET45-45R-168AT ET45-45R ET45-45R-240T COUPLING 1½" HEX Single Thread 4' ET45-38H-48 $ ' 1¾" ROUND Male - Female 6' ET-45-38H ET45-45R-76MF $ ' ET45-45R-100MF ' ET45-38H ET45-45R-124MF ' ET45-38H ET45-45R-148MF ' ET45-38H ET45-45R-17SMF ET45-38H ET45-45R-244MF Call CPLT45 T45 COUPLING $81.20 ADAPTERS CAR25-T45 1" ROPE - T45 $ CAR32-T45 1 1/4" ROPE - T CAR38-T45 1 1/2" ROPE - T CAT38-T45 T 38 - T CAT45-T51 T 45 - T BAR38-T45 1 1/2" ROPE (FM) - T 45 (M) BAT38-T45 T 38 (FM) - T 45 (M) BAT45-T51 T45 (FM) - T 51 (M) BS-R32-T45 125ROPE (FM) - T45 (M) HSBT45 HSST45 HOLE SAVER BELL HOLE SAVER T45 SPEAR HOLE SAVER T45 $ BS-T45-H18 BS-T45-H20 BS-T45-T51 T 45 (FM) - HL HL 1800 (M) T 45 (FM) - HL 2000 (M) T 45 (FM) - HL T51 (M) ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/2 BCT4564 $ BBT4564 $ " BCT BBT BBT4576RT $ /2" BCT BBT BBT4589RT " BCT BBT BBT45102RT /2" BCT BBT BBT45115RT " BBT BBT45127RT BRT45127 $ /2" BBT " BBT BRT " BBT BRT45203 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. REAMING BITS 23

24 24 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits T51 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 3" BCT5176 Call BBT5176 $ BBT5176RT Call REAMING BITS 3 1/2" BCT5189 $ BBT BBT5189RT Call 4" BCT BBT BBT51102RT $ /2" BCT51115 Call BBT BBT51115RT BRT51115 Call 5" BCT51127 Call BBT BBT51127RT BRT51127 Call 5 1/2" BBT BBT51140RT Call BRT51140 Call 6" BBT BBT51152RT BRT51152 Call 8" BBT51203 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. 1¾" ROUND Single Thread EXTENSION ROD 1¾" ROUND Male - Female 12' ET51-51R-144 $ ET51-51R-148MF $ ' ET51-51R ET51-51R-172MF ET51-51R ET51-51R-220MF HSBT51 HSST51 HOLE SAVER BELL HOLE SAVER T51 SPEAR HOLE SAVER T51 $ COUPLING CPLT51 T51 COUPLING $ ADAPTERS CAR32-T51 1 1/4" ROPE - T51 $ CAT38-T51 T38 - T CAT45-T51 T 45 - T BAT38-T51 T38 (FM) - T 51 (M) BAT45-T51 T45 (FM) - T 51 (M) BS-R32-T51 125ROPE (FM) - T51 (M) BS-T38-T51 T 38 (FM) - HL T 51 (M) BS-T45-T51 T 45 (FM) - HL T51 (M) Striking Bars & Shank Adapters STRIKING BAR SHANK 3/4 X 4¼ 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 1 X 6¼ 7/8" ROPE SB68R22 $80.73 SB77R22 $83.10 SB78R22 $83.10 SB88R22 $ " ROPE SB68R SB77R SB78R SB88R SB89R25 $ ¼"ROPE SB68R SB77R SB78R SB88R SB89R ½ROPE SB77R SB78R SB88R T38 SB77T SB78T SB88T EXTERNAL FLUSHING SHANK 7/8 X 4¼ 1 X 4¼ FLUSHING COLLARS External Flush Striking Bars 7/8" ROPE SB78R22EXT $83.10 SB-FC25 1" FLUSHING COLLAR, 7/8" BAR $ " ROPE SB78R25EXT SB88R25EXT $ SB-FC28 1 1/8" FLUSHING COLLAR, 1" BAR

25 MINING AND CONSTRUCTION CONSUMABLES 25 Threaded Steel & Bits 1 ½" ROPE - R ROPE EXTENSION ROD 1½" ROUND Single Thread 1½" ROUND Double Thread 1½" ROUND All Thread 10' ER38-38R-120 $ ER38-38R-120 $ ER38-38R-120AT $ ' ER38-38R ER38-38R ER38-38R-144AT ' ER38-38R ER38-38R ER38-38R-168AT ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/4" BCR3857 BBR3857 BCR3857RT 2 1/2" BCR3864 $ BBR3864 $ BCR3864RT Call 2 3/4 BCR BBR " BCR BBR BCR3876RT Call 3 1/2" BCR BBR BCR3889RT Call 4" BCR BBR BCR38102RT Call BRR38102 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. ADAPTERS COUPLING REAMING BITS CAR25-R38 1" ROPE - 1 1/2" ROPE $81.90 CAR32-R38 1 1/4" ROPE - 1 1/2 ROPE CAR32-R38SQ 1 1/4" ROPE - 1 1/2" ROPE SQUARE CAR38-T45 1 1/2" ROPE - T BAR25-R38 1" ROPE (FM) - 1 1/2" ROPE (M) BAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) BAR38-R32 1 1/2" R (FM) - 1 1/4" R (M) BAR38-T38 1 1/2" ROPE (FM) - T 38 (M) BAR38-T45 1 1/2" ROPE (FM) - T 45 (M) BAR38-R51 1 1/2" ROPE (FM) - 2" ROPE M) CPLR38 1½" ROPE COUPLING $56.20 HOLE SAVER HSBR38 BELL HOLE SAVER 1½" ROPE $ HSSR38 SPEAR HOLE SAVER 1½" ROPE Striking Bars & Shank Adapters SHANK SEALS 5/16 7/16 1/2 9/16 5/8 3/4 CS8MM CS11MM CS13MM CS14MM CS16MM CS19MM Call $3.25 Call $3.25 Call $3.25 FLUSHING COLLAR SEALS SB-FC25-1 1" SEALS SB-FC /8" SEALS Call Call For additional shank adapters see our website, 25

26 26 MINING AND CONSTRUCTION CONSUMABLES Betonamit Expansive Cracking Agent BETON-TYPR $73.50 BETONAMIT, a highly expansive cracking agent, is supplied in powder form, sealed in handy 5kg plastic packs. It must be mixed with a specific quantity of clean cold water and poured into holes pre-drilled in the material to be cracked. After a few hours reaction time BETONAMIT exerts a huge expansive pressure, which quickly increases to such a degree that any hard rock, standard or reinforced concrete can be broken. BETONA- MIT can be used both indoors and outdoors, in dry or humid conditions, even underwater. This information is provided as a service and should not be relied upon. Always make sure you read and follow all instructions provided with product. Visit our web site, CrowderSupply.com for PDF spec sheets. SCALING BARS ALUMINUM (1" SCH80) Includes Chisel PRICE BLACK PIPE (3/4" SCH40) Includes Chisel PRICE 7/8" HEX SOLID Includes Chisel 1" HEX SOLID Includes Chisel 5' SCB-AL-60 $41.00 SCB-BP-60 $30.95 SCB-22H-60 SCB-25H-60 6' SCB-AL SCB-BP SCB-22H-72 SCB-25H-72 7' SCB-AL SCB-BP SCB-22H-84 SCB-25H-84 8' SCB-AL SCB-BP SCB-22H-96 SCB-25H-96 10' SCB-AL SCB-BP SCB-22H-120 SCB-25H ' SCB-AL SCB-BP SCB-22H-144 SCB-25H ' SCB-AL SCB-BP ' SCB-AL SCB-BP SCB /8"Ø X.940 SHANK OFFSET CHISEL SCB8071-7/8" HEX X.800 SHANK OFFSET CHISEL SCB9000 POINT CHISEL SCB9010 STRAIGHT CHISEL Other Scaling Chisels Built to Your Specifications 26

27 MINING AND CONSTRUCTION CONSUMABLES 27 THREAD LUBE J751G Jet Lube J75 1 Gal $48.20 J752G Jet Lube J75 2 Gal $81.09 J755G Jet Lube J75 5 Gal $ Air Hose & Accessories LINE OILER Aluminum - Pressure Feed J891G Jet Lube J89 1 Gal (pumpable) $43.21 J892G Jet Lube J89 2 Gal (pumpable) $78.74 J895G Jet Lube J89 5 Gal (pumpable) $ JK1G KOPR-KOTE 1 Gal $53.14 JK2G KOPR-KOTE 2 Gal $ JK5G KOPR-KOTE 5 Gal $ LO-5PF 1/6 Pint 1/2" NPT $45.00 LO-10PF 1/3 Pint 3/4" NPT $52.00 LO-15PF 1/2 Pint 3/4" NPT $58.00 LO-30PF 1 Pint 1" NPT $74.00 All Steel - Joy Football Style - Constant Feed ECO1G Eco-Safe 1 Gal $49.50 ECO2G Eco-Safe 2 Gal $99.91 ECO5G Eco-Safe 5 Gal $ MSDS Data Sheets available on our website: Crowdersupply.com LO-JOY-FB 1 Pint 1-1/4" NPT $ RDO55G RDO5G RDO1G ROCK DRILL OIL ROCK DRILL OIL 55 GALLON ROCK DRILL OIL 5 GALLON ROCK DRILL OIL 1 GALLON Call $75.00 $22.00 AIR-H AIR HOSE CONTRACTORS AIR HOSE 3/4" X 50' W/FITTINGS AIR-H CONTRACTORS AIR HOSE 1" X 50' W/FITTINGS AIR-H-25-WB AIR-H-32-WB AIR-H-50-WB 1" WIRE BRAID 1¼" WIRE BRAID 2" WIRE BRAID AIR-H-12-WHP WHIP HOSE 1/2" X 6' UNIVERSAL CPLG AND SWIVEL WHIP CHECK $ Call Call Call Call LO-60-CF 1 Quart 1-1/4" or 1-1/2" NPT $ LO-120-CF 2 Quart 1-1/4" or 1-1/2" NPT $ LO-180-CF 3 Quart 1-1/4" or 1-1/2" NPT $ LO-230-CF 1 Gallon 2" or 2 1/2" NPT $ LO-290-CF 1.5 Gallon 2" or 2 1/2" NPT $ LO-690-CF 3 Gallon 2-1/2 or 3" NPT $ Air King Universal Coupling WCSML WHIP CHECK 1/2" - 1¼" HOSE MADE IN USA $12.50 WCLRG WHIP CHECK 1½" - 3" HOSE MADE IN USA Hose Ends Male NPT Ends Female NPT Ends 1/4" AMH $9.80 AMB1 $9.70 AMC1 $8.35 3/8" AM1 $6.20 AMB $8.35 AMC $8.35 1/2" AM5 $9.15 AM2 $7.25 AM3 $7.65 3/4" AM6 $6.25 AM7 $7.45 AM8 $7.35 1" AM11 $8.20 AM12 $8.25 AM13 $

28 28 MINING AND CONSTRUCTION CONSUMABLES Darda ROCK SPLITTERS Enormous splitting force up to 413 tons Dust free and near silent operation Vibration free Light weight Precision work Always controllable For use in close quarters and hard to access places. Easy handling Phase 1, A hole of a precise diameter and depth is drilled into the material. The wedge set (one wedge and two counter wedges) is inserted into the drill-hole. Phase 2, The wedge is driven forward under hydraulic pressure, forcing the counter wedges apart with a force of up to 400 tons. The material splits within seconds. Phase 3, With enlarging counter wedges the split can be expanded to its maximum width. Reinforcing rods break or can be cut up with a suitable power tool, e.g. the Darda HCS 6 Combi- Shears. The power from within The stone and concrete splitting cylinder functions according to the proven wedge principle, whereby a strong force is applied in an extremely constricted space (from within). Rock and concrete put up considerable resistance to forces applied externally. As a result, conventional demolition methods such as hydraulic chisels or crushers are unable to demolish these materials with any worthwhile degree of control or precision. By comparison, the resistance of stone and concrete to force applied internally is 90% less, with the result that they disintegrate relatively easily. The right combination for every job Hydraulic power units with a variety of drive systems are available for different applications and requirements. They can produce up to 50 MPa (500 bar) maximum system pressure. All of our splitting cylinders can be combined with each of our power units. The high-quality hydraulic hose sets are designed for the strong pulsating pressures. 28

29 MINING AND CONSTRUCTION CONSUMABLES 29 Powered by 3.75 HP Briggs & Stratton Engine (5 Gal. Pump) Powered by 3 HP Air Motor, Large Reservoir (5 Gal. Pump) Powered by 1.5 HP Electric Motor, Single Phase, 60 cy, 3450 RPM, 110/220V, 5 Gal. Pump D01-12 Size 12 Darda Splitter - Complete Unit $19, $19, $19, D01-9 Size 9 Darda Splitter - Complete Unit $17, $18, $18, D01-2 Size 2 Darda Splitter - Complete Unit $16, $16, $16, D01 D02 D03 Hydraulic Power Unit Only, 3.75 Hp Briggs & Striation Gas Engine, 5 Gal Reservoir $3, Hydraulic Power Unit Only, 3 Hp Air Motor, CFM at 100 PSI, 5 Gal Reservoir $4, Hydraulic Power Unit Only, 1.5 Hp Electric Motor Single Phase 110/220 volts, 5 Gal Reservoir $3, Dadra Rock & Concrete Splitting Cylinder Rock & Concrete Splitting Cylinders (No Power Pack) Includes Plug, Feathers, Whips, Quick-Connect Couplings & Covers Block Manifold Used to run multiple cylinders on one power pack Shipped with everything needed D00-12 Darda Splitting Cylinder, Size 12 $15, D Block Manifold 2 $1460 D00-9 Darda Splitting Cylinder, Size 9 $13, D Block Manifold 3 $1880 D00-2 Darda Splitting Cylinder, Size 2 $12, D Block Manifold 4 $2280 Plug Feathers Extension Hoses D010-2 Plug, Size 2 $ D High Pressure Hose 50-1 Required $ D010-3 Plug, Size 3 $ D Low Pressure Hose 50-1 Required $ D010-7 Plug, Size 7 $ D Quick Connect Coupler 2 Required $97.60 each D010-8 Plug, Size 8 $ D Coupler Cover 2 Required $4.60 each D010-9 Plug, Size 9 $ D437 1/4 Female x 3/8 Male Reducer 2 Required $3.60 each D Plug, Size 12 $ D438 Low Pressure Hose Connector $3.40 D011-2 Feather, Size 2 $ Lubricants D011-3 Feather, Size 3 $ D00-HPT Plug & Feather Lubricant 1/2 Pint Can $19.50 D011-7 Feather, Size 7 $ D00-PT Plug & Feather Lubricant 1 Pint Can $35.00 D Feather, Size 8 and 12 $ D014-3 Plug & Feather Lubricant 1/2 Pint Can, Case of 12 Cans $ D011-9 Feather, Size 9 $ D014-4 Plug & Feather Lubricant 1 Pint Can, Case of 12 Cans $ D Enlarging Feather, Size 7 $ D Enlarging Feather, Size 8 and 12 $ D Enlarging Feather, Size 9 $

30 30 MINING AND CONSTRUCTION CONSUMABLES MWS83 Jack Leg Drill TUL2B and FL7 Feed Legs 30 This dependable drill is built to hit harder and penetrate rock faster than any other drill on the market. For years it has been the work horse of the mining and construction industries. The MWS83F can easily be converted from a Jack Leg drill to a Sinker drill - perfect for quarries and road construction projects. It is a favorite of both drillers and managers for it's power and low maintenance. Mid-Western is the OEM of the S83 line of Jack Leg Drills. We manufacture our parts and drills right here in the United States. Our castings are made right here in America and we do all of our own precision machining. It's no wonder why our drills perform better than any of the foreign competition. Many have tried to copy our drills but none have been able to equal our quality. We have been manufacturing reliable equipment for over 65 years and we carry on that tradition today. Proven Design Versatility The most popular Jack Leg drill on the market The OEM of the popular MWS83 Jack Leg Drill and TUL2B and FL7 feed Legs Precision manufactured parts that run better and wear down slower Backed by over 65 years of American-made experience Part No. Description Telescopic Feed Legs Available in telescopic and power retractable models Available in either a 7/8" or 1" chuck size Sold as either wet or dry (with or without water) Can easily be converted to a powerful sinker drill Affordability Mid-Western drills are high quality and competitively priced In-house manufactured parts last longer and perform better Piston Dia. Stroke Length Overall Length Total Weight (lbs) Air Hose Size Water Hose Size Chuck Size MWS83FC72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,500 MWS83FC60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,525 MWS83FC54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,525 MWS83FC48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,525 MWS83FC36 Drill Complete with 36" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,525 MWS83FC24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,525 MWS83FD72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,490 MWS83FD60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,570 MWS83FD54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,570 MWS83FD48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,570 MWS83FD36 Drill Complete with 36" Leg and 3 2-1/2 27-1/ /2 1 $5,570 MWS83FD24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,570 Power Retractable Feed Legs MWS83FA754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/ /2 7/8 $5,855 MWS83FB754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/ /2 1 $5,890 MWS83FC Drill Only - Telescopic 3 2-1/2 27-1/ /2 7/8 $4,265 MWS83FD Drill Only - Telescopic 3 2-1/2 27-1/ /2 1 $4,310 MWS83FA Drill Only - Power Retractable 3 2-1/2 27-1/ /2 7/8 $4,680 MWS83FB Drill Only - Power Retractable 3 2-1/2 27-1/ /2 1 $4,715 MWS83DA Sinker Drill - Dry 3 2-1/2 27-1/ /2 7/8 $4,000 MWS83DB Sinker Drill - Dry 3 2-1/2 27-1/ /2 1 $4,000 MWS83WA Sinker Drill - Wet 3 2-1/2 27-1/ /2 7/8 $4,000 MWS83WB Sinker Drill - Wet 3 2-1/2 27-1/ /2 1 $4,000 Price

31 MINING AND CONSTRUCTION CONSUMABLES TUL2B and FL7 Feed Legs 31 TUL2B Feed Leg Telescopic Feed Leg capable of up to 562 lbs. of force. Compatible with our MWS83FC and MWS83FD Jack Leg drills. Available in several sizes up to 72'' (125'' fully extended). Feed Leg also features an adjustable handle. FL7 Feed Leg Power Retractable Feed Leg capable of up to 531 lbs. of force. Compatible with our MWS83FA and MWS83FB Jack Leg drills. Available in several sizes up to 54'' (126'' fully extended). Feed Leg also features an adjustable handle. Proven Design The most popular Feed Leg on the market to accompany the best Jack Leg drills The OEM of both the TUL2B and FL7 Feed Leg models Precision manufactured parts that run better and wear down slower Backed by over 65 years of American-made experience Versatility Available in telescopic and power retractable models Available in several different lengths Adjustable handle allows personal comfort for any driller Affordability Mid-Western Feed Legs are the highest quality equipment at the best price In-house manufactured parts last longer and perform better Part No. Description Standard Length Extended Length Price TUL2B24 Telescopic Feed Leg /8 $1,125 TUL2B36 Telescopic Feed Leg /8 $1,125 TUL2B48 Telescopic Feed Leg /8 $1,125 TUL2B54 Telescopic Feed Leg 54 $1,125 TUL2B60 Telescopic Feed Leg /8 $1,125 TUL2B72 Telescopic Feed Leg /8 $1,044 FL754 Power Retractable Feed Leg $1,050 Accessories Part No. Description Price MWLO7B Air Line Lubricator $ MWS83FM Muffler $ FL990X Swivel Assembly $ MWS83SKIT Sinker Drill Kit $ TUL2BKIT TUL2B Repair Kit $23.43 FL7KIT FL7 Repair Kit $18.00 TFL14KIT TFL14 Repair Kit $30.00 Parts Breakdowns available online at 31

32 32 MINING AND CONSTRUCTION CONSUMABLES COBRA COMBI GAS POWERED BREAKERS/DRILLS The Atlas-Copco Cobra Combi is a successor to the earlier and well-known model Cobra 149 and the Pionjar Gas Drills. At the same time, it is unique in its design since several improvements have been made to meet both environmental requirements from authorities as well as operators demand of ergonomic design and user comfort. CLEANER EMISSIONS, LOWER VIBRATIONS, LESS NOISE It is not only the design that is new on the Cobra Combi. Firstly, the noise level is lowered from 114 to 110 db thanks to a new muffler and it is thereby fulfilling the European Noise Emission Directive (NED). Secondly, new vibration dampened handles reduces vibration levels from 8 to 5 m/s². Also, with a new carburetor and a catalytic converter, the emissions are cleaner and meet the tough US emission regulations, EPA1. Further, with a new choke control, new carburetor and user-friendly start instructions, Cobra Combi is easy to use. The new gas control gives the operator better control of the speed and enhance the precision when operating. TECHNICAL SPECIFICATIONS Weight Length Depth Width over handles Tool shank 55 lbs in in Sound level (Acc. to ISO 3744) Vibrations level (Acc. to ISO 8662) in 7/8-4 1/4 110 db 5 m/s2 ENGINE Type Power Cooling system Starter system Recommended fuel Oil type Oil mix Fuel capacity Fuel consumption 185 cc 1-cylinder, 2-stroke 1kW Forced air Recoil starter Unleaded Atlas Copco two-stroke oil or similar 2% 1: US Gallon 0.36 US Gallon/hour Impact rate CAPACITY Drilling speed (In granite, 1 21/64 drill) Max drilling depth 2600 BPM 11.8 in/min2 6.5 ft Cobra Combi - Combination Breaker/Drill Model Part Number Tool Size Price Cobra Combi /8" x 4-1/4" Chuck $5040 A Multi-Purpose Too With a range of 18 different tools, you can use the Cobra Combi for everything from cutting and breaking, to drilling, driving and compacting. So whether you need to just break a small patch of concrete, or split a rock, you can get the job finished with a gas-powered machine in the same time it takes just to set up a compressor and hoses. Breaking Concrete Cutting Asphalt Drilling Digging Splitting Rocks 32

33 MINING AND CONSTRUCTION CONSUMABLES 33 COBRA PRO The Cobra Pro breaker is the heavy hitter in the range. Clocking up an incredible 44 ft/lb at the tool tip, it delivers almost twice the impact energy of other petrol-driven breakers on the market. In fact, it offers the same power-to weight ratio as many pneumatic or hydraulic breakers, but without being tied down to a power source or hoses. The Cobra Pro breaker helps you get the job done faster. This is due to a combination of high percussive energy and high blow frequency. Put them together, and you ll see why the Cobra Pro breaker is such a productive machine. With an extensive range of tools, you can use the Cobra Pro for everything from cutting and breaking, to driving and compacting. Hard hitting, 44 ft/lb performance. Ideal for a wide range of applications such as; breaking concrete, cutting asphalt, tamping ballast, digging and other tasks. Extremely low vibrations: only 2.3 m/s2. Easy maintenance and service. EPA 1 approved. Model Part Number Tool Size Price Cobra PRO /8" x 6" Chuck $4,950 Cobra PRO /4" x 6" Chuck $4,950 COBRA TT The Cobra TT is specially designed for tie tamping. Its portability and flexibility eliminate traffic disruptions caused from local ballast compunction. For maximum comfort, the Atlas Copco Hand and Arm Protection System (HAPS) achieves a very low vibration level. For optimal tie tamping and other maintenance jobs, the Cobra TT is right on track. Specially developed for tie tamping Impact energy of 29 ft/lb Unique vibration dampening Environmental friendly Model Part Number Tool Size Price Cobra TT /4" x 6" Chuck $5,355 Cobra TT Tie Tamper /8" x 6" Chuck $5,355 Feather & Wedge Set Part No. Description Dia Weight Price Feather & Wedge Set lbs. $90.86 Additional sizes available, please call for pricing and availability. 33

34 34 MINING AND CONSTRUCTION CONSUMABLES Crowder Supply Co, Inc. has built a machining cell at its Denver plant using the newest CNC machines and automation. This allows us to supply your custom needs on a timely basis. We can manufacture your precision accessories from top quality raw material and provide heat treatment. In addition to supplying parts for the mining and construction industries, our capabilities allow us to manufacture parts for all industrial applications with an emphasis toward long production runs. Our high level of automation means: High Product Quality High level of Quality Control Competitive Pricing Fast Turnaround Times FIN HOE MUCKING SCOOP EXPANSION SHELLS DOWN THE HOLE BITS DRAG BITS ROOF BOLT BITS HARD HATS MINERS LIGHTS MINERS BELTS BUTTON BIT GRINDING CUPS BOLT CENTRALIZERS SLUSHER PINS SLUSHER BLOCKS BETONAMIT Cracking Agent HOLE PLUGS FEATHER & WEDGE ALUMINUM CONDUIT COUPLINGS DOWN HOLE SHOCK SUBS TRI CONE BITS WICKET PINS ADJUSTABLE COLUMN TOPS CENTRALIZER SUBS CENTRALIZER CUSTOM MACHINING 34

35 CROWDERPNEUMATICS.COM COMPLETE LINE OF CHICAGO PNEUMATIC TOOLS PAVING BREAKERS ROCK DRILLS CHIPPING HAMMERS Page 2 Page 6 Page 8 RIVET BUSTERS SCABBLERS SAWS & PUMPS Page 5 Page 11 Page 11 BACKFILL TAMPERS IMPACT WRENCHES Page 13 Page 15 CROWDERPNEUMATICS.COM SEPT 2010

36 CROWDERPNEUMATICS.COM PAVING BREAKERS BREAKERS - 25 LB CLASS The CP 25 lb class demolition tools are lightweight yet rugged. They have been designed for light to medium construction and plant maintenance work, such as light demolition of floors, pavement, macadam, frozen ground and masonry walls. These tools are also very popular for bridge deck jobs. Alloy steel forgings - provide excellent durability. Four-bolt back head design - withstands rugged use. Integral oilers - provides continuous lubrication. CP 0112 S equipped with a Hushed Power muffler reduces sound level. CP 0112-EX has an extended handle for trench work. Chuck Size (inch) VRhandles incl. Part Number Description Weight (lbs) Air Consumption (cfm) Blows per Minute Retainer type Muffler incl. Price CP x 4 1/ Latch - - $ CP 0112 EX x 4 1/ Latch - - $ CP 0112 S x 4 1/ Latch Yes - $915 R Retainer Latch Kit $ R Back Head Bolt $8.04 BREAKERS - 35 LB CLASS P Back Head Bolt Nut $1.00 All features of 25 lb Breaker class Heavy-duty front head springs (CP 1210) - reduces reaction back to operator CP 1210-S equipped with a 'Hushed Power' muffler - reduces sound level Vibration reduced handle (VR Series) available on CP 1210 Air Consumption (cfm) VRhandles incl. Weight Chuck Size Blows per Retainer Muffler Part Number Description (lbs) (inch) Minute type incl. Price CP x 4 1/ Latch - - $ CP 1210 S /4 x Latch Yes - $ CP 1210 S /8 x Latch Yes - $ CP 1210 S x 4 1/ Latch Yes - $ CP 1210 VRS /4 x Latch Yes Yes $ CP 1210 VRS /8 x Latch Yes Yes $ CP 1210 VRS x 4 1/ Latch Yes Yes $1060 See Page 4 for Spare Parts and Kits 2 CROWDERPNEUMATICS.COM

37 CROWDERPNEUMATICS.COM 3 BREAKERS - 60 LB CLASS Part Number Description Weight (lb) Blows per minute Retainer type Muffler incl. Price T CP /4 x Latch - - $840 T CP /8 x Latch - - $840 T CP 1230 S /4 x Latch Yes - $945 T CP 1230 S /8 x Latch Yes - $945 T CP 1230 VRS /4 x Latch Yes Yes $1130 T CP 1230 VRS /8 x Latch Yes Yes $1130 BREAKERS - 90 LB CLASS The CP 1230 breakers are heavy duty, robust tools well suited for medium demolition work in construction and plant maintenance. All Features of 35 lb Breakers CP 1230 with four-bolt back head Heavy-duty front head springs - reduces reaction back to operator Reversible piston - reduces maintenance cost Air inlet swivel - for easy maneuverability Hushed Power' version - CP 1230-S is equipped with mufflers Vibration reduced handle (VR Series) available on CP 1230 Chuck size Air Consumption (cfm) VRhandle s incl. The CP 1240 demolition tools are designed to deliver the power and durability necessary for a variety of construction and plant maintenance applications such as breaking heavy concrete, reinforced concrete, frozen ground, macadam, boulders and pavement. Four-bolt back head - for rugged use Integral oiler - continuous lubrication Heavy-duty front head springs - reduces reaction back to operator Reversible piston - reduces maintenance cost Air inlet swivel - for easy maneuverability 'Hushed Power' versions - CP 1240-S are equipped with mufflers Vibration reduced handle (VR Series) available on CP 1240 Chuck size Air Consumption (cfm) Blows per minute VRhandles incl. Part Weight Retainer Muffler Number Description (lb) type incl. Price T CP /4 x Latch - - $920 T CP /8 x Latch - - $920 T CP 1240 S /4 x Latch Yes - $1025 T CP 1240 S /8 x Latch Yes - $1025 T CP 1240 VRS /4 x Latch Yes Yes $1230 T CP 1240 VRS /8 x Latch Yes Yes $1230 Breakers can be ordered with mufflers (S) or mufflers can be ordered separately See Page 4 for Spare Parts and Kits Vibration reduced models (VRS) are also silenced SVR 1230 SVR 1240 SVR CROWDERPNEUMATICS.COM 3

38 CROWDERPNEUMATICS.COM SPIKE DRIVER Part Number Description Weight (lb) Chuck size Air Consumption (cfm) Blows per minute Retainer type T CP 1230 SPDR $1330 T CP 1230 S SPDR YES $ Side Bolt Kit includes 2 of each front head bolt, spring, lock nut and bolt nut $64.53 R Driving Block 6-3/16 $ R085573M Driving Block 5-13/16 $79.35 T CP 1240 SPDR $1400 T CP 1240 S SPDR YES $ Side Bolt Kit includes 2 of each front head bolt, spring, lock nut and bolt nut $87.40 R Driving Block 6-3/16 $ R Driving Block 11-3/16 $ REPLACEMENT PARTS Muffler incl. Price Retainer latch kits includes: Latch, latch bushing, bolt or pin, and other parts needed to safely and easily replace worn or broken latches CP 1210 CP 1230 CP 1240 Complete Kit $ $ $67.23 Contents Retainer Latch R R F Retainer Latch Bushing R R R Roll Pin 10 dia x 55 lg Plunger Spring R R R Latch Plunger R R R Latch Bolt R R Nut P P Latch Bolt Bushing R R Side bolt kits includes: Two each of side rod bolts, nuts, springs and lock washers. CP 1210 Steel Spring 1 CP 1210 PU Spring 1-1/8 & 1-1/4 CP 1230 CP 1240 Complete Kit $ $ $ $87.40 Contents: 2 x Side Bolt R R R F x Side Bolt Nut R R R F x Lock Washer R R R R x Front Head Spring R R R CROWDERPNEUMATICS.COM

39 CROWDERPNEUMATICS.COM 5 Rivet Busters Pound for pound, there is no hammer with more hitting power than a rivet buster. Even a paving breaker would need to be at least twice as heavy to deliver an equivalent blow. This super-power can still be controlled thanks to low blow frequency and teasing throttle. That s why the rivet buster is one of the favorite tools of demolition contractors in the US. Users have discovered many new applications for rivet busters for working in both concrete and steel. No longer is the buster used exclusively by iron workers for forming and cutting rivets, but it has now found its way into the hands of operators who need the most powerful tool for the job. Concrete Applications Bridge deck work, where weight of breakers is restricted De-capping foundation pillars, where concrete is very hard Medium to heavy concrete demolition As an alternative to paving breakers where high hitting power is required but applied in a restrained space or working horizontally. Metal Applications Cutting and removing large rivets and bolts with narrow chisels and backout punch, or other special steel and accessories Cutting metal tanks or plates (3/16 thick, 5mm) with ripper chisel Industrial applications such as foundries or the petrochemical industry with beryllium chisels 4611-P 11 Open Handle 4608P 8 Open Handle 4611D 11 D-Handle 4608D 8 D-Handle Teasing throttle for progressive hitting frequency New buffer ring is now 90 durometer rubber for extra gives better control of such a powerful machine life Special Boyer valve makes the cylinder stroke effective Stepped piston to prevent accidental ejection of the longer for more hitting power piston Boyer valve s high quality deign makes the blow Choice of cylinders 11 or 8 more consistent Choice of handle Open grip with outside trigger or Forged steel handle for long life in rugged conditions D Handle with inside trigger Stepped piston of hardened steel 1/2 inlet bushing Air Blows Weight consumption Stroke per Part Number Description lb cfm minute Retainer type Price CP US standard (with spring) $ CP 4611 DULER US standard (with spring) $ CP 4608 DUSER US standard (with spring) $ CP 4611 PULER US standard (with spring) $ CP 4608 PUSER US standard (with spring) $1000 Consumables and Accessories for Rivet Busters using Jumbo Steel Part No Description for 4608 & 4611 Price Part No Description for 4160 Price P Lower Sleeve $ Lower Sleeve $12.25 P Upper Sleeve Upper Sleeve Rubber Bumper Rubber Bumper 3.50 P Retainer Spring Retainer Spring 1.80 Safety and Operating Instructions as well as Parts Breakdowns available at See our Air Hose & Accessories under Crowder Supply page 27 CROWDERPNEUMATICS.COM 5

40 CROWDERPNEUMATICS.COM SINKER DRILLS Chicago Pneumatic Sinker Drill s robust design incorporates a side exhaust and a 'flat back' that makes them easy to handle in quarry, mine and general excavating work. The design also provides a main valve and cylinder porting concept that helps maintain constant drilling speed throughout a long service life. Working parts are constantly protected with an effective lubrication system. Forged steel housings withstands rugged use Cushioned piston reduces shock Multi-position throttle for easy starting of holes Blower lever for deep hole cleaning (except CP-0022) Integral oiler provides continuous lubrication Air inlet swivel improves maneuverability Chuck size (inch) Air consumption (cfm) Blows per minute Retainer type Comments Price Part Number Description Weight (lb) CP /8x3 1/ Spring VR handles kit $ CP /8x4 1/ Spring VR handles kit $1350 T CP x4 1/ Latch Beavertail T CP /8x3 1/ Latch Beavertail T CP /8x4 1/ Latch Beavertail T CP 0032 S /8x4 1/ Latch Beavertail VR handles kit $1530 VR handles kit $1530 VR handles kit $1530 Inc. Muffler -- 3dBA $1695 R Muffler Kit $ R Wet Kit $ T CP x4 1/ Latch Inc. water kit $1710 Beavertail T CP /8x4 1/ Latch VR handles kit $1710 Beavertail T CP 0069 WET /8x4 1/ Latch VR handles kit $1815 Beavertail Z Wet Kit $ R VR Handles Kit for 0022, 0032 and 0069 Rock Drill $ CP 0022 Sinker Drill CP 0032A Sinker Drill CP 0069 Sinker Drill Safety and Operating Instructions as well as Parts Breakdowns available at 6 CROWDERPNEUMATICS.COM

41 CROWDERPNEUMATICS.COM 7 ROCK DRILLS / CHIPPING HAMMERS These versatile tools are both a drill and a chipping hammer. With the CP 14, CP 9A & F, a push of the rotation release button easily and quickly converts the tool to a chipping hammer. The CP-0009 and CP-0014RR rotary hammers are designed for a wide variety of constructions and maintenance applications such as driving or setting masonry anchors and drilling holes in concrete, bricks or rock. As a hammer, these tools can be used for chipping, scarifying, scaling and cleaning welds. Part Number Excellent power-to-weight ratio helps drill holes faster and easier than comparable electric rotary hammers Built-in oiler provides continuous lubrication Teasing throttle for precise control Rotation release button converts tool to a hammer (CP 14, CP 9A & F) Cushioned piston for smooth operation, long life 'Hushed Power' muffler available to reduce noise (CP 9CS & ES) Description Weight lb Chuck size inch Air consumption cfm Blows per minute Retainer type Comments Price T CP 0009 A 8.0 3/4x3 3/ Quick change Rotation $690 release button Z CP 0009 AC 8.0 3/4x3 3/ Quick change $655 T CP 0009 CS /4 Rnd Quick change Muffler Incl. $730 T CP 0009 E 8.8 3/4x3 3/ Quick change $825 T CP 0009 ES / Quick change Muffler Incl. $900 T CP 0009 F 8.0 Spline Quick change Rotation release button $690 Z Complete Retainer Sleeve - quick change retainer, retainer plate, retainer ring & dust excluder $52.46 Z Complete Round Chuck - round chuck, 17 retainer balls, 4 steel balls, & sleeve retainer spring $ Z Complete Hex Chuck - hex chuck, 17 retainer balls, 4 steel balls & sleeve retainer spring $ Z Complete Spline Chuck - spline chuck, 17 retainer balls, 4 steel balls, & sleeve retainer spring $ F Complete Muffler - muffler, cap screws and washers $77.97 R Adaptor CP9 to SDS Plus $ T CP 0014 RR /8x3 1/ Spring $1200 T CP 0014 RRBS /8x3 1/ Spring $1350 F Muffler Complete - includes: muffler, lock nut, washer and cap screws $ F Air Inlet Bushing $25.57 F Hose Tail $4.84 R Chuck $ R Chuck Sleeve $63.20 CP 0009 Right hand rotation With an adaptor, can be used with electric hammer drill bits Spline version available Adapter (R137586) round to SDS Electric hammer tools are available on our website: CP 0014 Superior drilling rates Greater drilling capacity compared to plug hole drills Designed for production drilling of small holes CROWDERPNEUMATICS.COM 7

42 CROWDERPNEUMATICS.COM Chipping Hammers CP 0012 Optimum power-to-weight ratio for a good balance between hitting power and easy handling Straight forward design for easy maintenance and repair Handle design similar to the well-known CP 0009 Teasing throttle and an air cushioned piston give the operator precise control Muffler assembly as standard Rugged construction, hardened steel cylinder and handle Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Weight (lb) Chuck size Air consumption (cfm) Stroke Blows per minute Retainer type CP "Hex US standard Yes $300 Muffler incl. Price CP "Rnd US Standard Yes $ Whip Hose Assembly $40 C Ball Type Screw On Retainer $39.12 P Sleeve Retainer Complete (includes Lock Spring) $63.20 H Lock Spring $1.88 CP 0017 Designed for years of trouble-free service Closed aluminum handle with inside trigger for maximum effectiveness and operator comfort Oil-resistant neoprene exhaust deflectors Available with choice of.580 hex or.680 round bushings Vibration-reduced and muffler included WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Chuck size Air consumption (cfm) Stroke Blows per minute Retainer type Price CP 0017 SVR 3H.580"Hex US Standard $ CP 0017 SVR 3R 680"Rnd US Standard $ Whip Hose $40.00 P Retainer Oval Collar, Round Shank $73.95 P Retainer Oval Collar, Hex Shank $ C Retainer Quick Change, Off-Center $91.41 Safety and Operating Instructions as well as Parts Breakdowns available at 8 CROWDERPNEUMATICS.COM

43 CROWDERPNEUMATICS.COM 9 CP 4123 Classic simplate valve Heat treated cylinder Now with spline lock instead of clip locking mechanism CP 4125 Unique ring valve as standard for harder blow in tough applications or dirty environments Chrome plated cylinder for extra durability Spline locking to prevent loosening of handle or cylinder CP 4123 and 4125 Powerful, yet compact and lightweight Rugged construction, hardened steel cylinder and handle Teasing throttle for precise control Open grip handle with self closing outside trigger Available in 2, 3, or 4 cylinder stroke versions Choice of bushing:.680 Round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Weight (lb) Chuck size Air consumptio n (cfm) Stroke Blows per minute Retainer type CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $ CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $ CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $400 Muf fler incl. Price Whip Hose $40.00 P Retainer & Lock Spring $63.20 P Lock Spring $ CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $ CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $ CP H "Hex US Standard (with spring) - $ CP R "Rnd US Standard (with spring) - $ Whip Hose $40.00 P Retainer and Lock Spring $63.20 P Lock Spring $1.80 CROWDERPNEUMATICS.COM 9

44 CROWDERPNEUMATICS.COM CP 4130 Locking mechanism with four high strength 1/2 bolts D handle with outside trigger and extra safety mechanism Muffler assembly as standard Simplate valve for smooth operation Strong and reliable Available in 3 or 4 cylinder stroke versions Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation CP 4131 Excellent power-to weight ratio helps drill holes faster and easier than comparable electric rotary hammers Built-in oiler provides continuous lubrication Teasing throttle for precise control Cushioned piston for smooth operation and long life CP 4132 Four high strength 1/2 bolts locking mechanism D Handle with inside trigger Standard retainer Strong and reliable Available in 3 or 4 cylinder stroke versions Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE NOT INCLUDED SOLD SEPERATELY Part Number Description Weight (lb) Chuck size Air consumption (cf m) Stroke Blows per minute Retainer type CP H "Hex US Std w/ spring Yes $ CP R "Rnd US Std w/ spring Yes $ CP H "Hex US Std w/ spring Yes $ CP R "Rnd US Std w/ spring Yes $380 P Retainer & Lock Spring $63.20 P Lock Spring $ Whip Hose $40.00 Muffler incl. Price CP H "Hex Ball type retainer Yes $ CP R "Rnd Ball type retainer Yes $430 Z Retainer Complete includes: Retainer, 6 Steel Balls, Spring, Retainer Sleeve and External Circlip $ Z Steel Balls Set of 6 $ Whip Hose $ CP R Rnd US Std w/ spring - $ CP H Hex US Std w/ spring - $ CP R Rnd US Std w/ spring - $ CP H Hex US Std w/ spring - $ Hose Swivel 7/8-24 inlet thread with 3/8 male pipe thread $ Retainer Oval Collar $ Lock Spring $ Whip Hose $40.00 Safety and Operating Instructions as well as Parts Breakdowns available at 10 CROWDERPNEUMATICS.COM

45 CROWDERPNEUMATICS.COM 11 SLUDGE PUMPS The CP 77 sludge pump easily handles water containing 15% solids and particles up to 1 (25 mm) in size. It is suitable for pumping seawater and certain corrosive chemicals. Operates on venturi/ejector principle - no motor or diaphragm to wear out. Exhaust muffler - reduces sound level NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS Part Number Description T CP 0077 Sludge pump Weight (lb) Water outlet (inch) Max. suction lift (ft) Air consumption (cfm) Performance (gal/min) / gal/min at 136 ft Water inlet (inch) Price 2 1/2 $1740 F Inlet Hose Nipple 3 unthreaded x 2-1/2 BSP $17.47 R Outlet Nipple 2-1/2 NPT (both ends) $10.08 R Outlet Nipple 2-1/2 NPT Street Elbow $25.57 SUBMERSIBLE WATER PUMPS The CP 0010 and CP 0020 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8 (22 mm) from base. Single-stage centrifugal units driven by powerful vane motors Double seals protect bearings and motor from water and mud Integral oiler provides continuous lubrication Integral Strainer, Air inlet valve Bronze impeller Cast-iron housing NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS AND MUST NOT BE USED FOR DONG SO Part Number Description T CP 0010 Sump pump Weight (lb) Water outlet (inch) Min. water depth (inch) Air consumption (cfm) Overall diameter (inch) Performance Price / /4x gal/min at 90 $1240 R Air Exhaust Pipe $25.57 T CP 0020 Sump pump /2 7/ x11 3/ gal/min at 90 $1960 R Air Exhaust Pipe $42.75 Safety and Operating Instructions as well as Parts Breakdowns available at CROWDERPNEUMATICS.COM 11

46 CROWDERPNEUMATICS.COM HEAVY DUTY CORE DRILL Pneumatic Core Drill & Concrete Vibrator Chicago Pneumatic's CP 0315 Core Drill is a powerful hand-held rotary drill with a threaded output shaft onto which a water swivel and a core bit can be fitted. It was originally designed for hand-cutting holes in reinforced concrete junction boxes for fiber optic cables. It is now being used in many other sectors of the construction industry for cutting holes in concrete, brickwork and stone and where access or position restricts the use of rig-mounted units. It is also ideal for use in hazardous environments where use of electrical tools is forbidden. Core Diameter Range: 2 1/2" to 6" Powerful 1.2 hp air motor Self-closing twist throttle operation with one-hand control Governor controlled motor holds speed at heavy loads while increasing power Integral oil reservoir ensures correct oiling during use External grease fitting for easy lubrication Breast-plate for operator comfort during horizontal drilling Light weight promotes stable operation Additional adapter available for standard drilling operation Part # Free Speed (rpm) Output Shaft Air Inlet Size Length Weight (lbs) Price T /64-16tpi 1/2 bsp $1,215 CONCRETE VIBRATOR Chicago Pneumatic's CP 2190 heavy duty concrete vibrator is designed for removing air pockets from pourings of low slump concrete in columns, footings, slabs and walls. It has a greater radius of influence which translates to a greater amount of work accomplished in a shorter period of time. And, unlike electric concrete vibrators, there is no chance of shock or need for extension cords. Variable speed throttle In-line lubricator Auxiliary air hose Locked motor end plates 1/2 NPT air connection Part Number Description Weight (lb) Length w/o Aux Hose Radius of Influence Capacity (cu yds/hr) Air (cfm) Vibration /Min Head Diameter Head Length Price T CP , /2 13 3/4 $870 Safety and Operating Instructions as well as Parts Breakdowns available at 12 CROWDERPNEUMATICS.COM

47 CROWDERPNEUMATICS.COM 13 Backfill Tampers CP backfill tampers are designed to effectively compact soil around foundations and other structures and for compacting backfill in trenches. Unlike the CP backfill tampers, many competitors on the market were designed for sand ramming only and thus lack the full power necessary for contracting operations. The CP 0003 is designed to handle light-to-medium applications; the CP 0004 RV is the ideal tool for heavier jobs. Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powered material Heat-treated cylinder and chrome plated piston - significantly extends tool life Adjustable packing - maintains a positive air seal Butt held with clamp screw - for quick, easy replacement Exhaust deflector - directs air, moisture and oil away from operator Integral oiler - continuously lubricates tool during operation Well balanced, smooth operation tool - easily guided by one person Part Number Description Weight (lb) Air consumption (cfm) Blows per minute Price T CP $890 P Butt P Lock Nut T CP $1035 P Butt P Lock Nut Part Number Description T CP 0006 Scabbler CP 0006 SVR Scabbler T CP 0066 Scabbler Scabblers The CP 0006 & CP 0066 scabblers are ideal tools for cleaning and roughening concrete and construction joints. They can also be used to produce ornamental or contrasting finishes on road and building structures. With their different handle designs, CP 0006 is more suitable when working on large surface areas whereas the CP 0066 is mainly used for hard-to-reach areas. Lightweight, compact tool with contoured grip handle - reduces operator fatigue; increases output Tungsten carbide-tipped pistons - last longer; are easily replaced Back head grip - gives in-line thrust Chamfered cylinder block - increases visibility of the work piece permitting close-up operation in corners Weight (lb) Width Air Cons (cfm) No. and type of pistons Comments Price /5 28 Three 4-point carbide tipped pistons Three 4-point carbide tipped pistons Three 4-point carbide tipped pistons Back head handle $440 Vibration-Reduced Handle In-line handle for tight areas F Piston for CP 0006 $68.55 R Piston for CP 0066 $73.95 F Piston Cap for CP 0006 $5.24 R Piston Cap for CP 0066 $1.61 $745 $565 CROWDERPNEUMATICS.COM 13

48 CROWDERPNEUMATICS.COM Picks and Clay Diggers Chicago Pneumatic offers you a wide range of robust picks to best match your demolition and clay digging applications. CP 0122 and CP 0125: The most powerful pick hammers in the range, weighing lbs. They are particularly suitable for working with relatively hard concrete in demolition, pile-capping, or bridge deck applications. CP 0111 and 0222: Very popular multi-purpose pick, with good power-to-weight ratio and latch retainer for quick and easy change of steels. Available with both inside and outside trigger. (22lbs (10Kg). FL 0022: Originally designed for mining and soft tunneling applications, the FL 0022 is a very slim, easy to handle tool. It is made entirely of steel with quality components for highest power and long lasting reliability. Screw-on retainer with square chucks for clay digging spades or cone retainers for demolition pick Part Number Description CP 0111 CHIT Pick Hammer CP 0111 CHLA Pick Hammer Weight (lb) Chuck size (inch) Air (cfm) Blows per minute Retainer type Handle type /8x3 1/ Latch Close handle - Inside trigger x4 1/ Latch Closed handle - Outside trigger Muffler incl. Price - $900 - $840 F Muffler Assembly for CP 0111 Pick Hammer $ CP 0122 S Pick Hammer CP 0122 SRV Pick Hammer CP 0122 SVR Pick Hammer CP 0125 S Pick Hammer CP 0125 SVR Pick Hammer /8x3-1/ Screw-on Closed handle- Inside trigger x 3 Hex Screw-on Closed handle- Inside trigger /8x3 1/ Screw-on Closed handle- Inside trigger x 3 Rnd Screw-on Closed handle- Inside trigger x 3 Hex Screw-on Closed handle- Inside trigger Yes $1250 Yes $1470 Yes $1485 Yes $1250 Yes $ CP 0222 CHIT Pick Hammer CP 0222 CHITBS Pick Hammer CP 0222 CHOTBS Pick Hammer /8x3 1/ Latch Closed handle - Inside trigger /8x3 1/ Latch Closed handle- Inside trigger /8x3 1/ Latch Closed handle- Outside trigger - $660 Yes $835 Yes $835 R Muffler Assembly $ FL 0022 Clay Digger /4x3 1/ Screw-on Closed handle - Outside trigger FL 0022 S Clay Digger FL 0022 SVR Clay Digger T FL 0022 VR Clay Digger /4x3 1/ Screw-on Closed handle - Outside trigger /4x3 1/4 Sq /4x3 1/4 Sq Screw-on Closed handle- Outside trigger Screw-on Closed handle- Outside trigger - $820 Yes $865 Yes $ $1340 F Muffler Assembly $ CROWDERPNEUMATICS.COM

49 CROWDERPNEUMATICS.COM 15 PNEUMATIC SAW The CP 0044 is a powerful tool driven by a direct drive, 4 hp motor and is designed to cut a variety of surfaces including concrete, asphalt and stone. This direct drive saw has no belts needing constant checking of tension. A built-in oiler provides continuous lubrication. The CP 0044 is also designed with safety in mind, using a standard lock-off trigger to help prevent accidental starting. Chicago Pneumatic 4 hp motor One-hand operation blade guard Integral oiler Lock-off trigger Direct drive operation Two position handle Air consumption (cfm) Blade arbor diameter Builtin oiler Comments Price Weight Part Number Description (lb) RPM T CP 0044 Saw Yes Inc. 4 hp motor $ Concrete Diamond Disc $ Asphalt Diamond Disc $ HEAVY DUTY INDUSTRIAL IMPACT WRENCHES CP impact wrenches have been developed as a simple 3-piece construction for ease and speed of servicing. They have durable steel clutch housings (zinc option on some models). These tools are heavy duty and suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Torque Controlled - Tool 'shuts off' at a predetermined torque with the added benefits of being able to eliminate some operator influence and be used for 2 or more torques. Part Number Description Drive Socket retainer Clutch Type Handle style Torque working Torque max. T CP6300 RSR 3/8" Friction Ring Single Dog Pistol $260 T CP6500 RS 1/2" Pin Double-Dog Pistol $335 T CP6500 RSR 1/2" Friction Ring Double-Dog Pistol $335 T CP6500 RSS 1/2 Quick Change Double-Dog Pistol $375 T CP6060 SASAB 3/4" Hole 2-Jaw Pistol $1870 T CP6060 SASAR 3/4" Friction Ring 2-Jaw Pistol $1785 T CP6060 SASAK 1 Hole 2-Jaw Pistol $1835 T CP0611 GASED 1" Hole 2-Jaw D Handle Outside Trigger T CP0611 GASEL #5 Spline #5 Spline 2-Jaw D Handle Outside Trigger T CP0611 PASED 1" Hole 2-Jaw D Handle Inside Trigger T CP0611 PASEL #5 Spline #5 Spline 2-Jaw D Handle Inside Trigger T CP6120 GASEL #5 Spline #5 Spline 2-Jaw D Handle Outside Trigger T CP6120 PASEL 1 1/2 #5 Spline 2-Jaw D Handle Inside Trigger T CP6120 GASED 1 1/2" Hole 2-Jaw D Handle Outside Trigger T CP6120 PASED 1 1/2" Hole 2-Jaw D Handle Inside Trigger Price $ $ $ $ $ $ $ $4695 CROWDERPNEUMATICS.COM 15

50 CROWDERPNEUMATICS.COM Freedom of movement, zero set-up time RED HAWK GAS POWERED BREAKER A Multi-Purpose Tool From the leading supplier of demolition tools comes the Red Hawk gas powered breaker. Tough and well designed, the Red Hawk is ideal for small. jobs or for working in remote locations. With no compressors, hoses or cables to set up, gas-powered breakers are ideal for smaller jobs. An impressive range of tools make the Red Hawk extremely flexible and the 7/8 and 4-1/4 steels make for rapid penetration of concrete. Low emissions, vibrations and noise level Red Hawk is a modern tool that meets emerging regulations. Equipped with a catalytic converter and newly designed carburetor, the machine meets tough US emission regulations EPA1. In addition, a silencer has reduced the noise level from 114 db to 107 db, thereby fulfilling the European Noise Emission Directive Easy to start With a choke control, carburetor and user-friendly instructions, the Red Hawk easy to start. An optional guide roller makes it easier to pull downwards to start the machine when it is placed higher up. Order part number Vibration-dampening handles have reduced vibration levels from 8 to less than 4.8 m/s 2. Easy to transport The Red Hawk weighs in at about 50 pounds. Each comes with its own carrying case which fits easily into the trunk of your car. TECHNICAL DATA ENGINE Model Part Number Wt (lb) L D Width over handles 16 CROWDERPNEUMATICS.COM Tool Shank Sound Level (Acc. To ISO 3744) Vibration Level (Acc to ISO 8662) Red Hawk /8" - 4-1/4" 107 db 4.7 m/s 2 $4195 Type 185cc 1-cylinder, 2 stroke Power 1kW Cooling System Forced Air Starter System Recoil starter Recommended Fuel Unleaded Price Oil Type Oil Mix Fuel Capacity Fuel Consumption Impact Rate synthetic two-stroke oil 2% 1: US Gal 0.36 US Gal/ hr 2600 BPM COMMON REPLACEMENT PARTS Part No. Description Price Ignition Cable & Spark Plug Cap $ Starter Spring $ Starter Rope & Handle $ Air Filter $ Spark Plug $9.96

51 Crowder Hydraulic Tools Authorized Distributor of Atlas Copco Hydraulic Tools and Accessories POWER PACKS PAVING BREAKERS POST DRIVERS ROCK DRILLS Page 4 Page 2 Page 5 Page 7 PICK HAMMERS CUT-OFF SAWS HYDRAULIC PUMPS CORE DRILLS Page 7 Page 8 Page 8 Page 8 POST PULLERS POST HOLE BORE ACCESSORIES Page 6 Page 6 Skid Steer, Tractor Package Run your hydraulic tools off the Auxiliary hydraulics port using an oil divider. Page 4 Crowder Hydraulic Tools offers chipping hammers and hydraulic breakers covering a wide range of applications. The range of tools covers a variety of drilling, breaking, cutting and driving applications including everything from light chipping to breaking up frozen ground and demolishing concrete. CROWDERHYDRAULICTOOLS.COM

52 2 Hydraulic Paving Breakers VIBRATION DAMPENED BREAKERS Here's this compact, quiet tool and it hits harder than any other type of breaker. That's because hydraulics are more efficient than electric, pneumatic or petrol-driven tools. For example, a 32 kg (70 lb) hydraulic breaker gives you the same hitting power as a 40 kg (90 lb) pneumatic. Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt and frozen ground. You can, of course, also use them for trenching, tietamping, spike driving and general demolition. LH 19E Hydraulic Paving Breaker and Power Pac The sprung handle provides vibration dampening. In addition to this, the handle offers enhanced durability and easy maintenance. Part Number Description Shank Size (inch) Weight (lb) Length Impact Energy (gpm) Oil flow (psi) Working pressure EHTMA Price LH 190 E breaker 1 x 4-1/ C $ LH 230E HBP breaker LH 230E HBP breaker LH 230E HBP breaker LH 280E HBP breaker LH 280E HBP breaker LH 400 E HBP breaker LH 400 E HBP breaker 1-1/8 x C/D $ /4 x C/D $ x 4-1/ C/D $ /8 x C/D $ /4 x C/D $ /8 x D/E $ /4 x D/E $2750 *) 25x108 mm shank version LH 190 E Breaker LH 230 E Breaker See our Hydraulic Accessories LH 280 E HBP Breaker LH 400 E Breaker On Page 4 Safety and Operating Instructions as well as Parts Breakdowns available at 2 CROWDERHYDRAULICTOOLS.COM

53 3 STANDARD BREAKERS The first time you use a hydraulic breaker, you're in for a surprise. Here's this compact, quiet tool and it hits harder than any other type of breaker. That's because hydraulics are more efficient than electric, pneumatic or petrol-driven tools. For example, a 32 kg (70 lb) hydraulic breaker gives you the same hitting power as a 40 kg (90 lb) pneumatic. Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt and frozen ground. You can, of course, also use them for trenching, tie-tamping, spike driving and general demolition. Part # Description Shank Size (inch) Weight (lb) Length (inch) Impact Energy (foot lbs) Oil flow (gpm) Working pressure (psi) EHTMA (class) Price LH 180 breaker 1 x 4-1/ C $ LH 220 HBP breaker LH 220 HBP breaker 1-1/4 x C/D $ /8 x C/D $ LH 220 breaker 1 x 4-1/ C/D $ LH 270 HBP breaker LH 270 HBP breaker LH 390 HBP breaker LH 390 HBP breaker 1-1/8 x C/D $ /4 x C/D $ /4 x D/E $ /8 x D/E $2550 LH 180 HBP Breaker LH 220 HBP Breaker LH 270 HBP Breaker LH 390 HBP Breaker HIGH BACK PRESSURE TOOLS These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for nonhigh back pressure units) Flow requirement of 8 gpm (Same as non-high back pressure units) Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units) To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part # Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warranty for tools damaged by over pressure when run without an oil flow divider. CROWDERHYDRAULICTOOLS.COM 3

54 4 Hydraulic Power Pacs You can use the Atlas Copco power packs virtually anywhere: fitted with wheels and handles, they are easy to maneuver around building sites. They are easy to start, the noise level is low, and when they are not in use, the power packs are small enough to be stored on shelves. They are also lightweight enough that two people can lift one up and fit it in the back of a van. The reliable motor, whether you chose gas, diesel or electric, supplies hydraulic power in accordance with the Power-on-Demand principle, i.e. the power pack runs idle until the tools begins to work. The power packs are protected by a strong frame made of steel tube. They have been tested for more than 1000 hours of operation and with several thousand units in daily operation. Part Number Description Hose Incl. Motor/Engine Elec. Start Weight incl. oil (lb) Oil flow (gpm) Max pressure (psi) EHTMA class Price LP 9-20 P PAC Yes 9 HP Honda gas No C $ LP DE PAC No 10 HP Yanmar Yes C $5150 diesel LP P PAC Yes 13 HP Honda gas No C/D $ LP PE PAC No 18 HP B&S Vanguard gas LP PE PAC No 18 HP B&S Vanguard gas LP 18-2X20/1X40 PE PAC* No All power packs include a filter indicator. 18 HP B&S Vanguard gas Yes C/D $7350 Yes C/D/E $7550 Yes 243 2x5/ 1x C/E $7750 *) Twin Outputs, Oil Flow 2 at 5 gpm each or 1 at 10 gpm INFORMATION AND MANUALS Detailed Parts Breakdowns and Operation Manuals Available on Web Site: Hydraulic Accessories RUN YOUR HYDRAULIC TOOLS FROM YOUR SKID STEER, TRACTOR OR BACKHOE! Use your auxiliary hydraulics port to power your hydraulic tools by connecting an oil divider and extension hoses. Part Number Description Max oil flow rate (gpm) Regulated oil flow rate (gpm) EHTMA class Price OFD 20 Oil flow divider C $ OFD 30 Oil flow divider D $875 Parts Breakdown on our web site, crowderhydraulictools.com EXTENSION HOSES By adding one or two 7 m (23 ft) extension hoses you can use up to 21 m (70 ft) of hose with no significant drop in pressure. The hoses are light and flexible and are fitted with flat-face, quick release couplings. (Extension hoses come as standard with LP 9-20 and LP P). Part Number Description Length (ft) Couplings: flat face quick release (dimension) EHTMA class Price Twin extension hose 23 1/2 C/D $ twin extension hose 39 1/2 C/D $525 4 CROWDERHYDRAULICTOOLS.COM

55 5 Hydraulic Post Drivers Used for driving in road barrier tubes, profiles, signposts, fences and a wide range of anchors. The post drivers provide stable, powerful, high speed driving for a variety of post sizes. When operated with an optional hosemounted remote-controlled valve, the drivers can be run with both open- or closed-centre systems. Now you can use your skid steer, backhoe, excavator or tractor to power your Post Driver. These tools are designed to work with high back pressure and represent a breakthrough in versatility. HIGH BACK PRESSURE (HBP) These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for non-high back pressure units) Flow requirement of 8 gpm (Same as non-high back pressure units) Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units) *To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part # Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warranty for tools damaged by over pressure when ran without an oil flow divider **For John Deere and Bobcat skidsteer that deliver between 16 and 30GPM. Pressure Reduction Hoses must be used in conjunction with the OFD. LPD-T HBP ** LPD-RV HBP ** KAPD-23 Activation type By trigger lever By remote valve By trigger lever Hydraulic system Open-centre Open- or closed-centre Open-centre Weight lb Max working pressure psi Flow gpm Impact rate at 30 l/min blows/ min EHTMA class C/D C/D C KAPD-23 Price: $2650 $2650 $1880 See Post Driver Adapter Table below Parts Breakdown Available on Web Site: crowderhydraulictools.com Hydraulic Post Drivers Adaptors Description Universal Adaptor 2 1/2 Round Adaptor 3 3/4 x 6 Square Adaptor 2-1/8" Part Number Price $41.20 $41.20 $41.20 CROWDERHYDRAULICTOOLS.COM 5

56 6 Hydraulic Post Puller The post puller is used by road-maintenance contractors to repair barriers. With hardened jaws and automatic chain tightening clamp, the Atlas Copco post puller is ideal for removing all kinds of wooden or steel posts including IPE, HPE, and UPE profiles, plus round/square steel tubes. A built-in hand lever gives a total pulling force of up to 10 tons. Part Number Description Weight lb 132 LPP 10HD Oil flow gpm 5-10 Max working psi 2320 pressure Oil flow gpm 5-10 Lift capacity per Inch stroke Pulling Force Lb Full Pulling Force Lb EHTMA Class C/D Price $3250 Handheld Hydraulic Post Hole Borer Compact and efficient, this tool drills holes up to 1.3 m (4.3 ft) deep and mm ( in) in diameter. It offers reverse rotation and is designed for two-person operation. All augers have interchangeable bits and points. Part Number Description LPHB Posthole Borer Weight without auger Oil flow (gpm) Working pressure (psi) Torque (Nm) Speed of rotation (rpm) Auger Size at L=870 (inch) EHTMA class Price ,5-13,8 C/D/E $1550 Safety and Operating Instructions as well as Parts Breakdowns available at 6 CROWDERHYDRAULICTOOLS.COM

57 7 Hydraulic Pick Hammer The Atlas Copco LH 11 D-handle breaker is ideal for TECHNICAL DATA horizontal work in brick, mortar and light concrete. It is one of the most powerful pick hammers on the market, featuring an impact energy of 25 joules and impact rate of 2,400 blows/min. With its detachable front handle, the LH 11 is a popular choice for renovation, demolition and structural alteration jobs. LH 11 Part Number Shank Size inch 7/8 x 3-1/4 Weight lb 23.8 Length inch 23.6 Oil flow gpm 5.3 Working pressure psi Price: $1750 Hydraulic Rock Drills This lightweight tool is designed for drilling blast, anchor and rock-splitting holes. Used, for example, by contractors, armies and utilities who want convenient and efficient drilling without large compressors. With standard integral steel, it drills diameters of up to 50 mm (2 ) and depths down to approx. 6 m (33 ft) by using hydraulic power for impact and rotation. A small additional compressor is needed for flushing. Without air flushing, it can be operated wholly by hydraulics and can drill holes of down to 1 m (3.3 ft) with a spiral hammer drill. TECHNICAL DATA Part Number Description LHD 23 M Rock Drill Shank size hex 7/8" x 4-1/4" Weight without hoses and drill lb 54 Service weight lb 62.4 Oil flow gpm Working pressure psi Impact rate blows/min Revolutions rpm EHTMA class C Price: $4360 Detailed Parts Breakdowns and Operation Manuals Available on Web Site: CROWDERHYDRAULICTOOLS.COM 7

58 8 Hydraulic Cut-Off Saws These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you can use the saws for floor, road and other light surface jobs. LS 14 LS 16 Part Number Weight lb Oil flow gpm Rotation speed, rpm 1/rpm Speed ft/s Disc size inch Arbor size inch 1 1 Cutting depth inch EHTMA class C/D C/D/E Price: $2050 $ Walk Behind Cart $1075 Hydraulic Core Drills These powerful drills are ideal for jobs where there is no space for drill stands. Due to the non-kick back operation, you can still drill holes of up to 200 mm (8 in) in diameter free hand. Fully hydraulic, the tools can be used for wet diamond core drilling on the toughest jobs. The LCD core drill offers spark free operation there are no electrical components for safe operation inside buildings, in hazardous environments and even underwater. TECHNICAL DATA Length without drill (inch) Speed of rotation (rpm) Part Number Description Weight (lb) Oil flow (gpm) Working pressure (psi) Drill diameter EHTMA class Price LCD , C/D $ LCD , C/D $2850 Hydraulic Pumps Lightweight and compact submersible discharge pumps are used in a wide range of applications. These include continuous pumping of clean or contaminated water on building sites, in flooded excavations and cellars. TECHNICAL DATA Part Number Description Weight Oil flow (gpm) Working pressure (psi) Pump head max (ft) Pump flow max (gps) Solid handling up to (inch) EHTMA class LWP ,8-6, ,7 3/8 C $ LTP ,9-10, ,5 2 1/2 D $4050 Parts Breakdown on our web site, crowderhydraulictools.com Price 8 CROWDERHYDRAULICTOOLS.COM

59 9 Crowder Pneumatic Tools Authorized Distributor of Atlas Copco Tools and Accessories PAVING BREAKERS ROCK DRILLS STOPER & FEED LEG Page 10 Page 12 Page 14 PICK HAMMER CHIPPING HAMMER RIVET BUSTER Page 15 Page 16 Page 17 PUMPS BACKFILL TAMPER SCALER Page 17 Page 18 Page 18 Crowder Pneumatic Tools offers chipping hammers and pneumatic breakers covering a wide range of applications. The range of tools covers a variety of drilling, breaking, cutting and driving applications including everything from light chipping to breaking up frozen ground and demolishing concrete. CROWDERHYDRAULICTOOLS.COM 9

60 10 Simplicity of design means fewer parts, less hassle, easier on-site service and maintenance and therefore less down time. Good news for everyone who buys, rents, or operates our machines. When we first introduced the TEX range we raised the bar for the industry and it became a global leader. And still is. The most recent additions to the TEX range include new design features that live up to the TEX breakers reputation for excellent handling, performance and reliability. Simplicity, in the design and the function of the eight most recent models TEX , sets a new standard for pneumatic breakers again! In each series, and in some cases also between the series, TEX breakers have many common parts. This helps you keep your parts stock to a minimum. They not only share parts, but they have a lot more in common: Valve parts of glass-fiber reinforced polymer eliminate corrosion problems When the machines are running offload, the piston turns on air-cushions at either end of the cylinder, virtually eliminating metal-to-metal contact and reducing vibrations and wear Streamlined silencer profile does not obscure the chisel and work-piece from the operator Low center of gravity gives good balance, considerably reducing operator fatigue Design eliminates need for side bolts Unique swivel coupling, which rotates even when pressurized, makes the TEX breakers easier to maneuver. Part Number Description Pneumatic Paving Breakers Silenced Breakers Shank Size (inch) Weight (lb) Length Air Consumption (cfm) Impact Frequency (blows/min) AC TEX 140 PS US 1 x 4 1/ / $930 AC TEX 180 PS 1 1/8 x / $1050 AC TEX 180 PS US 1 x 4 1/ / $1050 AC TEX 220 PS / $1120 AC TEX 220 PS 1 1/4 x / $1120 AC TEX 270 PS 1 1/8 x / $1165 AC TEX 270 PS 1 1/4 x / $165 AC TEX P60 (non-silenced) 1 1/8 x $950 AC TEX P60 (non-silenced) 1 1/4 x $950 AC TEX P60 1 1/8 x $1075 AC TEX P60 1 1/4 x $1075 AC TEX P90 (non-silenced) 1 1/8 x $1025 AC TEX P90 (non-silenced) 1 1/4 x $1025 AC TEX P90 1 1/8 x $1150 AC TEX P90 1 1/4 x $1150 Price Tex PS Pneumatic Breakers P60 P90 breakers Safety and Operating Instructions as well as Parts Breakdowns are available on our web site, crowderhydraulictools.com 10 CROWDERHYDRAULICTOOLS.COM

61 11 TEX Series Solid body, solid performance and ease of use The latest TEX series is a marriage of the best and most useful features, characteristics and performance of the breaker range it replaces, and a number of new, but well-proven features such as Atlas Copco s solid body concept and the two-step trigger, SOFTSTART. Solid Body Concept The solid housing design contains fewer parts and that means greater reliability. It also allows for fast and exceptionally easy on-site service a few basic tools are all you need. Existing Atlas Copco products that feature the solid body concept have enjoyed great success, winning broad market acceptance. PE Vibro-reduced Breakers For the new PE Breakers, with spring-mounted handles, we have further improved the vibration characteristics, decreasing the vibration emissions. The new breakers are still as hard-hitting and reliable as the previous TEX series, but with greater operator comfort and more productivity. PS Breakers Noise Reduced, Standard Breakers These fixed-handle breakers feature all the advantages of the PE series except the vibro-reducing handles. They are as hardy, reliable and productive as ever. Vibration Reduced Breakers AC TEX 150 PE US 1 x 4 1/ / $1075 AC TEX 190 PE 1 1/8 x / $1165 AC TEX 190 PE US 1 x 4 1/ / $1165 AC TEX 230 PE 1 1/8 x / $1380 AC TEX 230 PE 1 1/4 x / $1380 AC TEX 280 PE 1 1/8 x / $1440 AC TEX 280 PE 1 1/4 x / $1440 AC TEX 21 PE 1 x 4 1/ / $1430 AC TEX 33 PE 1 1/8 x $1565 AC TEX 33 PE 1 1/4 x $1565 AC TEX 40 PE 1 1/8 x $1625 AC TEX 40 PE 1 1/4 x $1625 Safety and Operating Instructions as well as Parts Breakdowns are available on our web site, crowderhydraulictools.com TEX 21, 33 and 40 PE Pneumatic Breakers Tex PE Pneumatic Breaker CROWDERHYDRAULICTOOLS.COM 11

62 12 Pneumatic Rock Drills Light and easy to handle, BBD Rock Drills are ideal for those quick jobs and for working in difficult-to-get-to areas. They can be equipped with either D- or T-handles. The ratchet-wheel action provides faster rotation and higher impact frequency for drilling in soft to medium hard rock. RH Drills are designed for heavier jobs such as bench and secondary drilling, plus drilling for smooth blasting. RH drills have a robust rifle-bar rotation mechanism and high impact energy for drilling in hard rock. Light weight for easy handling Built-in air-flushing gives faster blasting cycles Stepless throttle for easy collaring Robust kick-latch retainer change steels quickly and easily Spring-dampened handles reduce vibrations by 75% Silencer in impact- and wear-resistant polyurethane reduces noise levels by more than 50% TECHNICAL DATA Impact Freq. (blows/ min) Rotation Speed (rpm) Penetration Rate Shank Size Weight Length Air Part Number Description (in.) (lbs) (cfm) Price BBD 12D 3/4 X 4 1/ / $ BBD 12DS 3/4 X 4 1/ / $ BBD 12-T01 7/8 X 4 1/ $ BBD 12TS-01 7/8 X 4 1/ $ RH 571-5L 7/8 X 4 1/ /8 $ RH 571-5LS 7/8 X 4 1/ /8 $ RH 658L 7/8 X 4 1/ / /4 $ RH 658L 1 X 4 1/ / /4 $ RH 658LS 7/8 X 4 1/ / $ BBD 15E 3/4 X 4 1/ / /4 $ BBD 15E 7/8 X 3 1/ / /4 $ BBD 15E 7/8 X 4 1/ / /4 $ BBD 15ET 7/8 X 4 1/ / /4 $ RH 572E 7/8 X 4 1/ /4 $ CROWDERHYDRAULICTOOLS.COM

63 13 The DKR 36 is a dual-function pneumatic drill/chipper that weighs just ten pounds. It s a machine that packs a powerful punch. Despite its light weight and compact size, you can get more work done up to two to three times more than with a comparable electric drill. It s also a lot more robust, and will not burn out when pushed hard. This dual-function machine can be used for both chipping and drilling. Changing between the different modes is simple: just exchange the chipping tool for a drill steel, and the DKR 36 automatically switches to the drilling function. Light weight, heavy hitting More productive than an electric drill/chipper Powerful, yet light weight Two functions in one machine Built-in lubricator for easy maintenance Quick-coupling chuck for fast tool changes Pneumatic Rock Drill/Chipper TECHNICAL DATA DKR 36 DKR 36R Part No Shank Size inch.580 x 3 1/2 3/4 x 3 1/4R Weight lb Length inch 14 3/4 14 3/4 Air Consumption cfm Impact Frequency blows/min Rotation Speed rpm Penetration Rate In./min Hose Connection in. 3/4 3/4 Price $975 $740 Safety and Operating Instructions as well as Parts Breakdowns available at CROWDERHYDRAULICTOOLS.COM 13

64 14 TECHNICAL DATA Part Number Description Pneumatic Stoper and Feed Leg Drills Air Consumption (cfm) Rock Drill Piston Bore (in.) Stroke Length (in.) Impact Rate (Hz) Length (in.) BBD 46WS-6 Silenced / /16 86 $ BBD 46WS-8 Silenced / /32 88 $ BBD 46WR / /16 86 $ BBD 46WR / $ BBC 16W $ BBC 34W $ BBC 34WS Silenced $ BBD 94W $ RH 656W $2100 Part Number Description Suitable for Rock Drill BBD 46WS/WR Falcon Suitable for production drilling, raise driving and bolting in soft to medium hard rock; Short stroke, good penetration rates; Large piston diameter gives high efficiency even at low air pressure; Ratchet wheel rotation mechanism; WR version with clockwise rotation for tightening nuts and roof bolting BBC 16W Puma All-round rock drill, suitable for most drilling applications in medium to hard rock; Long stroke, good penetration rate; Robust rifle bar rotation mechanism; Pusher leg control placed in back head of the rock drill BBC 34W Leopard Highly efficient in medium to hard rock; Long stroke, high impact energy; Large piston diameter makes it very efficient even at low air pressure; Powerful rifle bar rotation mechanism; Pusher leg control placed in back head of the rock drill BBD 94W Panther High performance rock drill for soft to hard rock; Short stroke and high impact rate makes it ideal for soft rock; Large piston diameter for high efficiency even at low air pressure; Ratchet wheel rotation mechanism; Pusher leg control is placed on the pusher leg RH 656W Suitable for soft to medium hard rock; Good ratio between high penetration/low air consumption; Due to low weight, it can also be used as a sinker. Supplied with T-handle; Robust rifle bar rotation mechanism; Pusher leg control is placed on the pusher leg BBC 34 DSI $ BBD 94 DSI $3480 PUSHER LEG DATA Piston Bore (in.) Feeding Length Length Retracted (in.) Length Extracted (in.) BMT 51 BBC 16W, 34W 2 23/ / / /32 33 $ ALF 71 BBC 16W, 34W 2 3/ / / /4 31 $ ALF 71-1 BBC 16W, 34W 2 3/ / / / /2 $ ALF 72D BBD 94W 2 3/4 51 3/ / /4 42 $ ALF 72D-1 BBD 94W 2 3/4 47 1/ /16 35 $ BMK 62S BBD 656W 2 3/ / / / /2 $900 DOUBLE TELESCOPE ALF 67/80 BBC 16W, 34W 2 5/8 3 5/ / / / /2 $ ALF 67/80D BBD /8 3 5/ / / /64 42 $2040 Weight (lbs) Weight (lbs.) Price Price 14 CROWDERHYDRAULICTOOLS.COM

65 15 Pneumatic Pick Hammer Vibration-reduced pick hammers tend to fall into two categories: either they give you good vibration dampening, but poor chisel control. Or vice-versa: ineffective dampening, but good control. With the new TEX 07PE you get the best of both. Plus good impact energy. All in a package that weighs less than 27 pounds. If you think this sounds too good to be true, ask for a demo and see for yourself. Low weight high productivity Fitted with D-type handles, machines in the TEX 09 and TEX 12 series are the lightest and most productive medium -weight pick hammers in their class. with the reliability you need TEX 09 and TEX 12 pick hammers are extremely reliable machines. Available in a variety of models, they go on giving the same high level of performance under the toughest conditions. Wide range of choices There are several versions to choose from, making it possible to cater to the needs in many different applications. All versions are silenced. SOFSTART trigger The TEX 09 and TEX 12 comes with a special two-step trigger that makes the job easier by giving you full chisel control. The TEX 10 pick hammer is a light, compact all-rounder that you ll really appreciate having around when you need a heavy hitter. With its long piston stroke and relatively low frequency, you can work quickly and effectively in concrete, hard brick and other hard materials....high performance/weight ratio Operators like the TEX 10 because it s easy to handle. It weighs just 10 kg and at 500 mm is comparatively short. Add to this the high impact energy, and you have a tool that in relation to its size and weight, hits surprisingly hard. This is especially true if you compare it with an electric tool of the same weight class: pneumatic hammers are known to deliver significantly more hitting power sometimes as much as 100 per cent more....proven design. Wide range of choices The design of the TEX 10 is the result of many years of tough work experience. The pick hammer is available in three versions and with two different shanks. Two of the versions have traditional hexagonal shanks and can be used in a wide range of applications. The TECHNICAL DATA Part Number Description Shank Size (in.) Weight (lbs) Length Air Consumptio n (cfm) Impact Frequency (blows/min) Tool Retainer Price TEX 09 PE 7/8 X 3 1/ LATCH $ TEX 09 PS KL 7/8 X 3 1/ LATCH $ TEX 09 PS 7/8 X 3 1/ CAP $ TEX 10 PS 7/8 X 3 1/ CAP $ TEX 10 PSR 1 X 3 RND CAP $ TEX 10 PS KL 7/8 X 3 1/ LATCH $ TEX 12 PE 7/8 X 3 1/ LATCH $ TEX 12 PS 7/8 X 3 1/ CAP $ TEX 12 PS KL 7/8 x 3-1/ LATCH $940 Safety and Operating Instructions as well as Parts Breakdowns available at CROWDERHYDRAULICTOOLS.COM 15

66 16 Smaller tools for lighter jobs Pneumatic Chipping Hammers TEX 3 and TEX 05 are the ideal choice for a wide variety of lighter chipping and scaling jobs. They are particularly suitable for renovation and structural alteration work, including chipping concrete, roughening surfaces, hole making, chasing and trimming various materials. TECHNICAL DATA Air Consumption (cfm) Part Number Description Shank Size (in.) Weight (lbs) Length Impact Frequency (blows/min) Price TEX 3 3/4 X $ TEX 05P.580 HEX $ TEX 05P.680 RND $ TEX 05P 3/4 X $ TEX 05PE (vibration dampened) 3/4 x $ TEX 3 KIT $ TEX 05 KIT $ TEX HEX $ TEX RND $ TEX 317 D-HANDLE.580 HEX $ TEX 317 D-HANDLE.680 RND $ TEX HEX $ TEX RND $ TEX 318 D-HANDLE.580 HEX $ TEX 318 D-HANDLE.680 RND $ TEX HEX $ TEX RND $ TEX 319 BALL RETAINER.580 HEX $ TEX 319 BALL RETAINER.680 RND $ TEX 417 D-HANDLE.580 HEX $ TEX 417 D-HANDLE.680 RND $ TEX BOLT.580 HEX $ TEX BOLT.680 RND $ HEX $ TEX BOLT BALL RETAINER TEX BOLT BALL RETAINER.680 RND $ CROWDERHYDRAULICTOOLS.COM

67 17 Pneumatic Rivet Busters Fitted with D-type handles, the TEX 262, TEX 380 and 1133 hammers are tough, powerful tools designed for heady demolition work. Their long stroke and high impact energy, coupled with the ergonomics of the rivet buster value, make them ideal for extended demolition use. TECHNICAL DATA TEX 626 RP TEX 626 RD TEX 830 RD TEX 830 RP TEX 1133 RD TEX 1133 RP Part No Stroke Length Handle Type Open D Handle D Handle Open D Handle Open Shank Size Jumbo Jumbo Jumbo Jumbo Jumbo Jumbo Weight (lb) Length Air Consumption (cfm) Impact Rate (blows/min) Price $1015 $1010 $1075 $1075 $1210 $1210 Air Powered Pumps Both clean and polluted liquids Pumps used for both clean and polluted liquids in the construction, mining and process industries have to satisfy stringent demands for quality and reliable operation. They must be able to withstand difficult conditions with regard to both the surrounds and the media being conveyed, with a minimum of maintenance. Atlas Copco s air-powered pumps meet the strictest requirements. They are available in two basic designs, DIP centrifugal pumps and DOP diaphragm pumps. Both types share a number of advantages. Robust Air-powered operation ensures superior resistance to dirt, damp and impurities. DOP pumps are not affected by sand or gravel in the pump liquid, thus minimizing the risk of stoppage and the need for maintenance. Cannot be damaged by overloading An air-powered pump never runs the risk of damage from overloading. Suitable in all kinds of environments These pumps contain no electrical components which can cause sparks, and do not leak oil or need any inflammable fuel. Efficient Air-powered operation gives very high capacity in relation to weight, which makes the pumps easy to transport and use in confined spaces. They also improve overall economy by better utilizing the compressor capacity that is most often readily available. Simple design Altas Copco s air-powered pumps are of very simple design, which means simple handling, reliable operation and low maintenance requirements. TECHNICAL DATA Max Flow (l/ s) Air Consumpti on (cfm) Part Number Description Max Head (ft) Weight (lbs.) Height (in.) Width (in.) Price DIP /4 $ DIP /4 $ DIP /4 $ DOP 15N /4 $2775 Safety and Operating Instructions as well as Parts Breakdowns available at CROWDERHYDRAULICTOOLS.COM 17

68 18 Pneumatic Backfill Tamper The TEX 640 backfill tamper is designed to efficiently compact loose backfill material around utility poles and foundations as well as backfilling trenches and road repairs. High blows per minute means that base material is compacted quickly and efficiently. The TEX 640 features a built-in lubricator which allows for the correct amount of oil during operation. An adjustable packing nut allows for proper readjustments as the packing set wears. TEX TECHNICAL DATA TEX 640 TEX 640 w/ Pole Part No Weight lb 40 Length inch Air Consumption cfm 38.5 Impact Rate blows/min 800 Price $835 Pneumatic Ergonomic Scaler $835 Ruggedly built, the TEX 117 is a low maintenance, long reach scaler perfect for many surface cleaning operations. Using a variety of standard accessories, the operator can chip concrete, grout, caulking or remove tiles, mastic, paint and roofing materials. The ergonomic long reach scaler reduces time consuming hand scraping and back breaking labor; it is economical to use, consuming only 7 cfm, and can operate from a small portable compressor. TECHNICAL DATA TEX 117 Part No Weight lb 17 Length inch 70 Air Consumption cfm 7 Impact Rate blows/min 2300 Price $660 Pneumatic Dust Collector Reduce On-Site dust and Boost Productivity Dust generated by drilling obscures vision and poses a health risk. The DCT dust collector reduces the amount of dust in the working environment. It can also increase productivity, since the drill cuttings are continuously removed. The DCT dust collector can be used with the entire range of Atlas Copco pneumatic handheld drills. The DCT dust collector works on the ejector principle, which creates an under-pressure throughout the filter system. Since the ejector is built into the filter unit, it cannot be damaged by external influences or by drilling dust. Part No Air Pressure Max (psi) Ejector Air Requirement (cfm) Suction Capacity cfm) Filter Area (ft2) Weight (lbs) Suction Hose Price /2 $ Bags $60 Safety and Operating Instruction as well as Parts Breakdowns are available for all tools shown here on our website, 18 CROWDERHYDRAULICTOOLS.COM

69 PNEUMATIC CONSTRUCTION TOOLS ROCK DRILLS PAVING BREAKERS CLAY DIGGERS CHIPPING HAMMERS Page 2 Page 4 Page 3 Page 7 RIVET BUSTERS TAMPERS SCALERS PARTS BREAKDOWNS Page 6 Page 8 Page 8 Construction Tools Complete Line of Pneumatic Equipment Complete Spec Sheets and Parts Breakdowns on our website: crowderairtools.com CROWDERAIRTOOLS.COM

70 2 APT Rock Drills The APT Model 109 and Model 115 are lightweight tools for drilling holes for anchor bolts and small dowel hole drilling. These versatile tools have a stop rotation feature that converts them from a drilling tool to a percussion tool for light chipping in horizontal and overhead work. Models 137 and 155 are used in general construction, utility work, and plant maintenance. They are designed for drilling through granite, hard faced rock, quarry drilling and drilling secondary holes for blasting. They are also used with dowel hole drilling machines. Adaptable to wet drilling application by attaching APT valve, wet tube and swivel assembly. Model lb. class Model lb. class Model lb. class Model lb. class Available with spline chuck Left-to-right hand rotation Stop-rotation feature Light-weight aluminum cast handle Model Part No. Chuck Size In. Stop-rotation feature Built-in automatic oiler Latch-type retainer Light-weight aluminum cast handle Bore Stroke B.P.M. 4 drilling speeds Replaceable piston stem bearing Available wet or dry Counter clockwise rotation Rubber handle grips 90 psi inlet press. Weight lbs. Length Inches 3 drilling speeds Replaceable piston stem bearing Built-in automatic oiler Available wet or dry Counter clockwise rotation Air Inlet NPT /4 x 3-3/4 1-1/ /8 female $ /8 x 3-1/4 1-15/16 1-3/ /8 3/8 male $ /8 x 3-1/4 2-3/8 2-5/ /4 1/2 male $ /8 x 4-1/4 2-3/8 2-5/ /4 1/2 male $ x 4-1/4 2-3/8 2-5/ /4 1/2 male $ /8 x 3-1/4 2-5/ /8 3/4 male $ /8 x 4-1/4 2-5/ /8 3/4 male $ x 4-1/4 2-5/ /8 3/4 male $1545 ACCESSORIES FOR ROCK DRILLS Spline Chuck for 109 Rock Drill $ Water Valve for Wet Head Model 137 and 155 Rock Drill Swivel Assembly for Wet Head Model 137 and 155 Rock Drill (includes: Swivel, O-Ring, Nut and Ring Price 2 CROWDERAIRTOOLS.COM

71 3 Clay Diggers & Trench Diggers The rugged APT Clay and Trench Diggers are used for digging clay, shale, hard pan, and frozen ground. The Model 118 is most commonly used for clearing out dirt under existing foundations and for tunneling under existing structures. The Model 118 can be used for horizontal and for vertical work. The Model 119 is the perfect tool for digging trenches to lay pipes, phone lines, for foundation work, etc. The only difference among the APT Model 117 Paving Breaker and Models 118 and 119 is the handle, they have the same cylinders and the majority of internal parts in common. This makes them very versatile tools for use in various types of work. The Model 125 is a lighter weight tool ideal for digging medium to lightly packed soil, for light demolition work and for tunneling around existing foundations. Deep case-hardened drop forged alloy steel cylinders Replaceable chuck bushing Latch-type retainer Model 119 Model 125 Model Part No. Chuck Size In. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price /8 x 3-1/4 1-3/4 3-3/ /2 3/8 male $ x 4-1/4 1-3/4 3-3/ /2 3/8 male $ /8 x 3-1/4 1-3/4 3-3/ /2 female $ x 4-1/4 1-3/4 3-3/ /2 female $ /4 sq. x 2-3/4 1-11/16 2-3/ /8 3/8 female $ /8 hex x 2-3/4 1-11/16 2-3/ /8 3/8 female $ /8 hex x 3-1/4 1-11/16 2-3/ /8 3/8 female $860 ACCESSORIES FOR CLAY DIGGERS AND TRENCH DIGGERS 6465 Muffler Assembly $ Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger) $ Whip Hose Assembly UF, 6 x 1/2 Hose with 1/2 NPT Male Swivel $ Whip Hose Assembly UF, 1L, 6 x 1/2 Hose with 1/2 NPT Swivel $ Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Male Swivel $ CROWDERAIRTOOLS.COM 3

72 4 APT Pneumatic Paving Breakers Airgo Ergonomic Paving Breakers The Airgo-Line Paving Breakers use the Airgo-line handle assembly which is designed to be a vibration dampening handle. The ergonomically designed handle absorbs at least 50% of the harmful vibration to the hands and arms of the operator. Paving Breaker Models 140, 160 and 190 are available as a Airgo-Line tool and come factory equipped with a Airgo-Line handle. Standard Paving Breakers Features Automatic valves Drop forged alloy steel handle Built-in automatic oiler Rubber handle grips Latch type retainer Swivel hose connection Noise dampening mufflers available Four-bolt back head Replaceable chuck bushing (except Model 140/140A) Airgo Paving Breakers - Combining Ergonomics with Power Features: Less vibration doesn't mean less power-same hitting power as standard models Vibration dampening ergonomic handle designed to absorb shock to the operator Handle is interchangeable with APT standard model, so now you can convert it into an ergonomic model in minutes Vibration isolator is easily replaceable Mufflers sold separately Model Part No. Chuck Size In. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT 140A x4-1/4 1-7/8 4-1/ /2 male $ Muffler for 140A Paving Breaker $ Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) A /8x6 2-1/4 4-1/ /4 1/2 male $ /4x6 2-1/4 4-1/ /4 1/2 male $ Muffler for 160A Paving Breaker $ Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) A /8x6 2-5/8 6-1/ /4 male $ /4x6 2-5/8 6-1/ /4 male $ Muffler for 190A Paving Breaker $ Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) Price 4 CROWDERAIRTOOLS.COM

73 5 Standard Paving Breakers Tough and dependable, the high performance model 190 is the most powerful air tool APT makes. It is designed for big jobs such as heavy demolition and concrete breaking. The 160 model paving breaker is a versatile, hard-hitting tool that can be used for medium to heavy demolition work and concrete breaking, and is the perfect all around breaker. The model 140 is a rugged, yet lightweight, paving breaker designed for light to medium construction work. It is ideally suited for plant maintenance work such as light demolition of floors, pavement, frozen ground and masonry walls, and is very popular for bridge deck jobs. The model 140, 160 & 190 standard paving breakers are also available in an ergonomic style that APT calls their Airgo-Line. The model 117, the 30 lb. class paving breaker is the ideal tool for light to medium demolition work as well as for use in confined areas. Model 117 Model 140 Model 160 Model 190 All APT Paving Breakers Feature: Latch type retainer Automatic valves Drop forged alloy steel handle Built-in automatic oiler Rubber handle grips Swivel hose connection Noise dampening mufflers available Four-bolt back head Replaceable chuck bushing (except for Model Model Part No. Chuck Size In. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price /8 x 3-1/4 1-3/4 3-3/ /4 3/8 male $ x 4-1/4 1-3/4 3-3/ /4 3/8 male $ Muffler Kit for 117 $ Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger x 4-1/4 1-7/8 4-1/ /8 1/2 male $ Muffler Kit for 140 $ Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger Side Rod Kit (includes: Bolt, Spring, Washer and Nut) /8 x 6 2-1/4 4-1/ /4 1/2 male $ /4 x 6 2-1/4 4-1/ /4 1/2 male $ Muffler Kit for 160 $ Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger Side Rod Kit (includes: Bolt, Spring, Washer and Nut) /8 x 6 2-5/8 6-1/ /4 male $ /4 x 6 2-5/8 6-1/ /4 male $ Muffler Kit for 190 $ Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger Side Rod Kit (includes: Bolt, Spring, Washer and Nut) CROWDERAIRTOOLS.COM 5

74 6 Rivet Busters The APT model 133 Rivet Buster was originally designed to cut rivets off metal structures. Today the Rivet Buster series is widely known for its tough, powerful tools. They have the ability to perform all types of medium to heavy demolition work. With half the weight of the 60 lb. class paving breakers, the ratio of their high impact energy versus their weight make them the most efficient tool APT makes. The model 133 meets the weight requirements for bridge deck repair work, and are also popular for cutting up underground tanks. Rivet Busters are offered in 8" and 11" stroke. The Model 133 also comes in a 4-bolt style handle which incorporates a vibration dampening feature. APT also has an outside trigger model that has a safety feature to minimize the possibility of being accidentally activated. The APT Model 633 Rivet Buster measures only 20 5/8 in length, delivering more power to those tight spaces. Weighing just 28 lbs., it s perfect for limited access work or whenever a compact, light weight and powerful tool fits the bill. This tool features an innovative cylinder design that reduces overall weight without compromising tool strength or hitting force Rivet Buster 11" Stroke 133 Rivet Buster 8" Stroke 633 Rivet Buster 6" Stroke All Rivet Busters Feature: Deep case-hardened alloy steel cylinder uses jumbo extra heavy duty tool steel Heavy duty upper and lower sleeves Adjustable exhaust deflector Includes Whip hose Assembly (#9266) UF, 1/2" Hose x 6' with 1/2" NPT Swivel Model Part No. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price / /2 3/8 female $ / /2 3/8 female $ / /8 1/2 female $1080 ACCESSORIES Retainer Kit (includes: Spring, Bumper, Upper and Lower Sleeves) $ Whip Hose Assembly UF, 1L, 6 x 1/2 Hose with 1/2 NPT Swivel and Oiler $ Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Swivel and Oiler $ CROWDERAIRTOOLS.COM

75 7 APT Chipping Hammers APT Chipping Hammers are used for scaling, chiseling, removing concrete build-up from the side of cement mixers, light concrete demolition and cement finishing, form stripping, etc. Flapper valve design allows dirt to pass without stopping the tool Deep case-hardened alloy steel cylinders Drop-forged handles Replaceable bushings Adjustable exhaust deflector Choice of optional retainers including the APT latch-type Price includes oval retainer, locking spring, 3/8 NPT inlet bushing, and Whip Hose Assembly UF, 1/2" Hose x 6' with 1/2" NPT Swivel Model 260 Series - 2 Bolt, D Handle Patented Ball Valve - more forgiving of dirt and debris, easier to maintain Ball-type throttle valve - less complicated, makes teasing the throttle easier Much easier to maintain in the field with two bolts, not four Drop-forged handle with more durable collar makes this tool stronger, longer lasting New 1/2" NPT threaded air inlet for more secure fit Available in 3" and 4" strokes Model 650 Series Traditional pistol grip handle Available in 2", 3" and 4" strokes Model Part No. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT R /16 1/2 $ H /16 1/2 $ R /16 1/2 $ H /16 1/2 $ / /4 7/8-24 $ / /4 7/8-24 $ / /4 7/8-24 $ / /4 7/8-24 $ / /8-24 $ / /8-24 $450 ACCESSORIES 7022 Oval Collar for 650 Series $ Retainer Spring $ Reducer Bushing 7/8-24 to 3/8 NPT Female $7.60 Price CROWDERAIRTOOLS.COM 7

76 8 Scalers - Needle Scalers The needle scaler cleans irregular surfaces easily. These versatile scalers remove rust, paint and other coatings from metal; peens welded joints and removes slag; cleans castings; chips stone, concrete and brick. APT's newest tool, the Scaler/Needle Scaler, is designed and crafted with the same attention to detail and careful choice of materials that have made our tools a benchmark of quality for over 60 years. A notched bayonet-style needle housing enables easy adjustment as needles wear, and allows quick conversion between needles and chisel without special tools. Standard Features: Rubber-faced throttle valve for positive seal Level-type throttle for easy control Alloy steel cylinder Models 305 (5" needles) and 307 (7" needles) include attachment with set of Model Part B.P.M. 90 PSI Weight (lbs.) Length (in.) Air Inlet NPT Price - Scaler with 7" needles , /4 1/4 female $170 Scaler Kit - 7" needles $ Needle Set $14.85 Backfill Tampers Model 131 Features Built-in large automatic oiler Flapper valve design allows dirt to pass without stopping the tool Internally reinforced large 5-3/4" malleable iron butt (standard) Pole (half-moon), and 3" diameter butts available The Model 131 Backfill Tamper is used for soil compaction, temporary filling of holes, asphalt packing, etc. Applications range from foundation and pavement repair to the installation of power or telephone poles. APT offers an optional half-moon shaped pole tamping accessory for compaction around a pole as well as a 3" diameter butt for confined space compaction. Model Part No. Bore Stroke B.P.M. 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price /2 5-1/ /8 1/2 female $835 ACCESSORIES Diameter Butt $ Half-moon Pole Butt $ Whip Hose Assembly UF, 6 x 1/2 Hose with 1/2 NPT Male Swivel $ Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Male Swivel $ CROWDERAIRTOOLS.COM

77 CROWDERPNEUMATICS.COM Pneumatic Post Drivers & Post Pullers Choose from Six Low-Cost Rhino Post Drivers Model specifications, Ordering Information and Pricing Complete Spec Sheets and Parts Breakdowns How to Choose a Driver Get Started Fast - Order by the Kit FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

78 2 Rhino Post Drivers Easily operated by one man, Rhino Post Drivers deliver up to 1700 blows per minute. One moving part, a reciprocating piston, strikes directly on the Post or Drive Cap. The Drivers have low air consumption rates, are light-weight and hand portable, ideal for driving in places that are hard to reach. All you need is enough air capacity, the recommended air pressure, a Filter- Regulator-Lubricator to assure clean air, proper pressure, plus ten drops of oil per minute, and your Rhino Post Driver will give you Fast, Low Cost driving. Alloy Steel Pistons and other features ensure little or no maintenance. 2 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

79 3 Rhino Post Drivers PD-55 drives a farm T post or a 12 ft channel post for a stop sign. PD-140 with special chuck and drive cap drives 4"x6" guard rail post. PD-39P Panel Post Driver drives a 1-5/8" panel post. In seconds, drive a multitude of posts... SELECT THE RIGHT SIZE FOR YOUR JOB In seconds, you can drive Telespar, Channel Posts, C Posts, Delineator Posts, Pipe, Sand Points, Ground Rods, T Posts, Anchors, Z Posts, Large Tent Pegs, I Posts, W Posts, Concrete Form Pins, Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes or any shape up to 4". Sheet Piling and Guard Rail Posts are driven with adapters. The lightweight Model PD-39 is easily operated by one man and is the perfect choice for driving all types of steel fence posts. A PD-39P Panel Post Driver ensures fast erection of temporary panel fencing. Because the PD-39's are so light in weight, the operator must pull down on the spring loaded handles to provide the correct weight for driving. The standard weight models, the PD-45/PD-55/PD-100/PD-140 are balanced to drive without help. See our web site, AirPostDrivers.com, for videos of all our Post Drivers and Post Pullers in action! Also download PDF technical spec sheets for our products. Spec Sheets Online FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 3

80 4 Choosing A Driver 1. WHAT ARE THE TYPES AND SIZES OF THE POSTS YOU ARE GOING TO DRIVE? Select a post or posts from the following chart. The charts also indicates which post driver with proper chuck adapter is capable of driving the post or posts you selected. You may be able to select only one driver for all the posts you want to drive. If that driver does not meet all your driving needs, you may need to select an additional driver with proper chuck adapter. (Example: Let s say you wish to drive a 1 5/8" line post, a 2" post, a 3" post, and a 4" x 6" H column guardrail post. The model PD-140 will drive all your posts. The PD-140 weighs 140 lbs and unless you plan to use lifting equipment or have very hard driving conditions, a PD-55 is more appropriate for the smaller posts while a PD-140 would be required for the 4" x 6" H column posts. 2. HOW DEEP ARE YOU GOING TO DRIVE THE POSTS? The chart assumes you will drive those posts to depths of three to five feet. The deeper you are driving the post the larger the post driver needed. (Example: A PD-55 will easily drive a 2" post three feet deep, but if you plan to drive the 2" posts ten to fifteen feet deep, for soil stabilization, you should probably use a PD-110.) 3. INTO WHAT TYPE OF SOIL ARE YOU GOING TO DRIVE THE POSTS? The chart assumes you are going to drive the posts into moist, light or medium weight soils. When driving a post, the soil has to have somewhere to go, so it is compacted beside the post, making for a very firmly set post. The heavier the soil, the fewer voids there are for the displaced soil to be compacted into. If the soil is heavy, compacted, and/or dry, it will be harder to drive the post and you may need the next larger post driver to drive the post. Rhino s Soil Definitions: Light: Beach sand, sand, soil with a high percentage of humus, etc. Medium: Soil with less humus, occasional gravel up to 1 1/2" dia., some clay, light shale content, etc. Heavy: Compacted soils, large gravel content, clay, heavy shale, asphalt, 3" to 5" concrete, etc. Note: If the soils you are driving into are dry, you can reduce driving times dramatically by wetting the ground where you are going to drive the post. It doesn t take a lot of water and it helps if you water the driving area occasionally while driving the post. You cannot drive posts in all conditions, for instance solid granite. Normally, the post hole is drilled in rock. Then the post is grouted in. If you are placing T posts in rock you can drill a smaller hole. Then drive the T post into it with a Rhino driver. It is much faster to drill a 1" hole than a 2" hole. 4 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

81 5 4. ARE YOU GOING TO USE LIFTING EQUIPMENT FOR YOUR POST DRIVER? If you are going to use lifting equipment to place your driver on top of the post, you should consider buying the largest Rhino driver that will drive all the posts you intend to drive. A larger post driver will drive your posts faster, give you maximum productivity and pay for the increased cost of the post driver many times over. 5. HOW MANY POSTS WILL YOU BE DRIVING ON A REGULAR BASIS? If you are driving a large number of posts, and the weight of the driver is not a problem, it will be more productive for you to buy the next larger driver. Rhino uses the following rule of thumb for post driver driving times: If the PD-45 will drive a post in two minutes, the PD-39 and PD-55 will drive the same post in one minute, the PD-110 will drive it in 30 seconds and the PD-140 will drive it in 15 seconds. These are not exact times, but will provide a good estimate. 6. WHAT CHUCK ADAPTERS DO YOU NEED? Choose the proper chuck adapters for the posts you will be driving by using Rhino Tech Data sheet, form no Use the misc. accessories section on the Rhino literature sheet, form no. 118, to order required or additional accessories. 7. WHAT REQUIRED OR ADDITIONAL ACCESSORIES DO YOU NEED? Required accessories are a Throttle Valve Kit and a Filter-Regulator-Lubricator. Throttle Valve Kit - Part No The throttle valve kit comes with a 2 foot hose whip which accommodates a 7 foot post. Order the throttle valve kit with one foot additional hose for every foot of post taller than 7 feet. (Example: If your tallest post is 10 feet, order your throttle valve kit with 3 feet of extra hose on the hose whip. You will be holding the throttle valve approximately 5 feet from the ground. The 2 feet of hose that comes with the hose whip and the additional 3 feet, totaling 5 feet, will enable you to reach to 10 feet. Filter-Regulator-Lubricator - Part No The filter-regulator-lubricator has three functions: The filter traps dirt coming through the hose from the air compressor and helps to remove water from the air. The regulator must be set at the proper air pressure recommended for your driver. (See Rhino literature, form no. 118) Proper air pressure is required for the safety of the operator and others working with or near the driver. The lubricator is needed so you can set it to drop 10 drops of oil per minute into the air to the driver for proper lubrication. The filter-regulator-lubricator can be mounted on your air compressor and used with other tools. If you are renting an air compressor or if the filter-regulator-lubricator will be on the ground, you should order a carrier, part no , for carrying and ease of handling. The filterregulator-lubricator should not be more the 25 feet from the post driver during operation to achieve the recommended lubrication. Additional Accessories - Rhino suggests that you consider ordering anti-vibration gloves for your operators and others working with the driver. You may also wish to consider ordering a hose reel and extra air hose to use with your driver. If you have any questions, call us at. We ll be happy to help. FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 5

82 6 Choosing A Driver Types & Sizes of Posts to be Driven PD-39 PD-39P PD-45 PD-55 PD-110 PD-140 Fiberglass T Posts X X X 3/4" to 1" Ground Rod X X 3/4" to 1-1/2" Reinforcing Bar Tent Stakes X X 1" Concrete Form Pins X X 1" Pipe X X X 1-1/4" to 1-1/2" Pipe X X X X X 1-5/8" Pipe X X X X X X 2" Pipe X X X X X 2-1/2" to 3" Pipe X X X X T Posts X X X X X X Telespar Posts X X X X Telespar Post Breakaway Bases (1) X X X 1.2 to 1.5 lbs/ft Channel Posts X X X X X 2 to 2.75 lbs/ft Channel Posts X X X X 3 to 4 lbs/ft Channel Posts X X X X Channel Post Breakaway Bases (2) X X X C Posts X X X X Rectangular Posts X X X X X I Beams X X X X Well Points (Sand Points) X 4" x 4" Wood Posts (3) X 4" x 6" H Column Guardrail Posts (4) X 12" Sheet Piling (5) X Silt Fence (6) X (1) To drive the telespar breakaway bases close to the ground you will need to order a special driving cap. (2) To drive the channel post breakaway bases close to the ground you will need to order a special driving cap. (3) To drive 4" x 4" wood posts you will need 4" x 4" wood post chuck, part no , for your PD-140. (4) To drive 4" x 6" h column guardrail posts you will need a 4" x 6" h column chuck, part no , and a 4" x 6" H column driving cap, part no , for your PD-140. (5) To drive 12" sheet piling you will need to order a special chuck and driving cap for your PD-140. (6) To drive fabric attached silt fence, you will need to order the special silt fence chuck for your PD FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

83 7 Post Drivers: PD-39 & PD-45, PD PD-39 Light Weight Medium Duty Post Driver with a 3-5/8" I.D. Master Chuck, uses 42 90PSI. Approx. Wt. 39 lbs. Panel Post Driver with a 2-1/8" I.D. Master chuck, uses 42 90PSI. Approx. Wt. 41 lbs. $2295 $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ Channel Post Chuck Adapter - 3 to 4 lbs/ft Posts $ Channel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts $ Channel Post Chuck Adapter to 1.5 lbs/ft Posts $135 PD Light Duty Post Driver with a 3" I.D. Master Chuck, uses 30 90PSI. Approx. Wt. 46 lbs. $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ Channel Post Chuck Adapter to 1.5 lbs/ft Posts $ PD-55 Medium Duty Post Driver with a 3-7/8" I.D. Master Chuck, uses 42 90PSI. Approx. Wt. 55 lbs. $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ Channel Post Chuck Adapter to 1.5 lps/ft Posts $ Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $ Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $155 PD PD-110 Medium/Heavy Duty Post Driver with a 4-1/4" I.D. Master Chuck. Shipping Weight 116 lbs. $ /8" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ Channel Post Chuck Adapter to 1.5 lps/ft Posts $ Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $ Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $165 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 7

84 8 Post Drivers: PD-110, PD-140, PD-200 & Accessories PD PD Heavy Duty Post Driver with a 4-1/4" I.D. Master Chuck, uses PSI. Approx. Wt. 139 lbs. $ /8" I.D. Chuck Adapter $ " I.D. Chuck Adapter $ /2" I.D. Chuck Adapter $ Channel Post Chuck Adapter to 1.5 lps/ft Posts Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $170 $170 $ "x6" H Column Chuck $ "x6" H Column Driving Cap $ "x4" Wood Post Chuck $690 PD PD Heavy Duty Post Driver with a 5-1/2" I.D. Master Chuck, uses PSI. Approx. Wt. 205 lbs. $ /8" I.D. Chuck Adapter $ /4" I.D. Chuck Adapter $ /4 I.D. Chuck Adapter $ " I.D. Chuck Adapter $ "x 6" Master Chuck $ "x 6" Wood Chuck $ Special Order Per Quote PD140S / PD200S SHEET PILE DRIVER PD-140S Heavy duty Sheet Pile Driver Includes slotted master chuck PD-200S Heavy duty Sheet Pile Driver Includes slotted master chuck $2750 $ PD-140S 4-3/4 (120.6 mm) Round Master Chuck $675 8 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

85 Throttle Valve Kit with 2' Host Whip (Used with Post Driver Models PD-45, PD-55, PD-100 & PD-140) $ Screen Fitting for Throttle Valve $ Hose Assembly 3/4 and up to 25 hose. Includes assembly labor and all parts except hose. Add $3 per foot for length of hose needed /4" Extra Hose for Valve Kit $3.00/ft Filter-Regulator-Lubricator, (Used with all Post Drivers for Operator Safety & Post Driver Protection) $ Carrier for Filter-Regulator-Lubricator $ Air Line Coupler 3/4 NPT End. Air King Universal Coupling Throttle Valve Kit and/or Filter-Regulator- Lubricator connection Nipple Used with Coupling # Filter-Regulator-Lubricator connection $ Coupler Safety Clip $ Throttle Valve Only w/ Level Guard $ Air Hose Reel with 100', 3/4" Air Hose Included $ ', 3/4" Air Hose Assembly $ Air Hose Reel Only $ Anti-Vibration Gloves - Size Small $ Anti-Vibration Gloves - Size Medium $ Anti-Vibration Gloves - Size Large $ Anti-Vibration Gloves - Size X-Large $ Anti-Vibration Gloves - Size XX-Large $ Post Drivers: Accessories PDT-45 Transport Cart Only* includes: cart, handle, wheels, axle, brackets for specified tools, as well as the following accessories: oil, hard hat, transport manual, extra bolts and washers PDT-55 Transport Cart Only* $ PDT-110 Transport Cart Only* $ PDT-140 Transport Cart Only* $ /4 Low Drive Extension Drive Cap for Square Breakaway Bases 1 pin $ /2 Low Drive Extension Drive Cap for Square Breakaway Bases 1-1/4 Pin $ /4 Low Drive Extension Drive Cap for Square Breakaway Bases 1-1/2 Pin $ Low Drive Extension Drive Cap for Square Breakaway Bases 1-3/4 Pin $ /4 Low Drive Extension Drive Cap for Square Breakaway Bases 2 Pin $ /2 Low Drive Extension Drive Cap for Square Breakaway Bases 2-1/4 Pin $ PD-55 Chuck Adapter for Square Low Drive Extension $ PD-140 Chuck Adapter for Square Low Drive Extension $ PD-110 Chuck Adapter for Square Low Drive Extension $ Sch 40 Drive Cap with T-Bar and Clip $ /2 Sch 40 Drive Cap with T-Bar and Clip $ Sch 40 Drive Cap with T-Bar and Clip $ /2 Sch 40 Drive Cap with T-Bar and Clip $ Sch 40 Drive Cap with T-Bar and Clip $ Drive Cap 5.00 od pin / 5.75 od Collar $ Drive Cap 6.00 od pin / od Collar $ Drive Cap (Special Order) Quote PDT-45 Transport Kit without Post Driver $ PDT-55 Transport Kit without Post Driver $ PDT-110 Transport Kit without Post Driver $ PDT-140 Transport Kit without Post Driver $ Hard Hat $16.50 $45 $7 $670 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 9

86 10 Kit Packages From Rhino PD-45 PACKAGES Rhino PDT-45 Total Solution includes Transport Accessories as well as PD-45 Light Duty Post Driver PD /2" (63.5mm) Chuck Adapter PD-45 2" (50.8 mm) Chuck Adapter PD /2" (38.1 mm) Chuck Adapter PD-45 1" (25.4 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable Rhino PDT-45 Transport Kit includes Transport Accessories as well as PD /2" (63.5mm) Chuck Adapter PD-45 2" (50.8 mm) Chuck Adapter PD-45 1" (25.4 mm) Chuck Adapter PD-45 Channel Post Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable Rhino PD-45 Utility Kit includes PD-45 Light Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose Rhino PD-45 Economy Kit includes PD-45 Light Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4110 $3190 $3950 $2300 PD-55 PACKAGES Rhino PDT-55 Total Solution includes Transport Accessories as well as PD-55 Medium Duty Post Driver PD-55 3" (76.2 mm) Chuck Adapter PD /2" (63.5 mm) Chuck Adapter PD-55 2" (50.8 mm) Chuck Adapter PD-55 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable Rhino PDT-55 Transport Kit includes Transport Accessories as well as PD-55 Medium Duty Post Driver PD-55 3" (76.2 mm) Chuck Adapter PD /2" (63.5 mm) Chuck Adapter PD-55 2" (50.8 mm) Chuck Adapter PD-55 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable Rhino PD-55 Utility Kit includes PD-55 Medium Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose Rhino PD-55 Economy Kit includes PD-55 Medium Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4325 $3375 $4145 $ FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

87 11 Kit Packages From Rhino PD-110 PACKAGES Rhino PDT-110 Total Solution includes Transport Accessories as well as PD /8" (92 mm) Chuck Adapter PD /2" (63.5 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable Rhino PDT-110 Transport Kit includes Transport Accessories as well as PD-110 3" (76.2 mm) Chuck Adapter PD-110 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose * Note: Chuck adapter selection is customizable Rhino PD-110 Utility Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose Rhino PD-110 Economy Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4855 $3905 $4975 $3280 PD-140 PACKAGES Rhino PDT-140 Total Solution includes Transport Accessories as well as PD /8" (92 mm) Chuck Adapter PD-140 3" (76.2 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable Rhino PDT-140 Transport Kit includes Transport Accessories as well as PD-140 3" (76.2 mm) Chuck Adapter PD-140 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable Rhino PD-140 Utility Kit includes PD-140 Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose Rhino PD-140 Economy Kit includes PD-140 Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $5040 $4090 $5155 $ Rhino PD-140 Wood Add-On 4" x 4" (101 mm x 101 mm) Wood Post Chuck Add to any of the PD-140 Kits Rhino PD-140 Economy Kit Guard Rail Add-On 4" x 6" (101 mm x 152 mm) H Column Chuck 4" x 6" (101 mm x 152 mm) H Column Cap Add the Chuck and Cap to any of the PD-140 Kits $690 $690 $750 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 11

88 12 Post Pullers Crowder Supply carries the Rhino line of both Manual and Hydraulic Post Pullers. See our web site, AirPostDrivers.com, for videos of all our Post Drivers and Post Pullers in action! Also download PDF technical spec sheets for our products. Spec Sheets Online 12 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

89 13 Post Pullers The Low Cost Answer for Pulling Posts PL-3 HYDRAULIC POST PULLER Pulls a 3/4" ground rod, 10 ft deep Pulls a 4"x6" steel guard rail post, 3 ft deep Pulls a standard 4" square wood post, 3 ft deep 1 PL PL-3 PL-3 Post Puller $ Post Grabber $ Panel Post Grabber $ Tent Stake Puller $95 MP-3 MANUAL POST PULLER With a Panel Post Grabber, pulls a 1-5/8" line post Pulls a 1-5/8" line post, 3 ft deep Pulls a 4"x4" wood post, 3 ft deep 1 MP * MP-3 MP-3 Post Puller *The Model MP-3 Part# , includes the Chain Assembly(4) and Post Grabber(2) $ Post Grabber $ Panel Post Grabber $ Chain Assembly $ Tent Stake Puller $95 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 13

90 14 CROWDER SUPPLY CO. INC. Phone: (toll free) Fax: Address: 8495 Roslyn Street Commerce City, CO Pneumatic Post Drivers and Post Pullers Model specifications, Ordering Information and Pricing Complete Spec Sheets and Parts Breakdowns How to Choose a Driver Get Started Fast - Order by the Kit CrowderSupply.com CrowderPneumatics.com CrowderHydraulicTools.com CrowderAirTools.com AirPostDrivers.com 14 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

91 HIGH VELOCITY JET FANS AIR MOVERS AIR MANIFOLDS / TANKS FOUNDRY TOOLS PAGE 2 PAGE 5 PAGE 7 PAGE 9 PAVING BREAKERS / CLAY DIGGER CHIPPING HAMMERS ROCK DRILLS RIVET BUSTERS PAGE 10 PAGE 11 PAGE 13 PAGE 14 NEEDLE/CHISEL SCALER LONG READH SCLAER AIR SCRIBE PARTS & ACCESSORIES FOR RIVET BUSTERS & CHIPPING HAMMERS FLTER-REGULATOR- LUBRICATOR SYSTEMS LUBRICATORS & HOSE WHIP ASSEMBLIES OTHER PARTS & ACCESSORIES ROCK DRILLS PAGE 15 PAGE 20 PAGE 24 PAGE 31 USA-AIRTOOLS.COM

92 2 HIGH VELOCITY JET FANS This four-bladed vane axial fan is called a Jet Fan because a high-velocity jet of compressed air is ejected from the trailing edge of the blade. This results in the forward rotation of the fan wheel just like a jet plane is pushed forward by the highvelocity jet ejected from the rear of the jet engine. Use for general ventilation in any location where compressed air is available. Use as blower or exhauster. Suited for ventilation of tanks, process vessels, or other confined areas for the removal of hazardous fumes or contaminated air from welding, sandblasting and other operations. Rated operating pressure PSI. Design allows for lower RPMs while still moving more air. Bearings are packed with a hi-tech synthetic lubricant for longer life. Propeller precision balanced by removing material from end of blades. Electro polished stainless steel fan guard. Heat-treated to T6 aircraft aluminum specifications. Super-duty, high quality, high pressure air seal for longer service. Heaviest-duty fan in the industry. TECHNICAL DATA Hi-tech four blade design. Guide vanes to eliminating turbulence which smooths air flow and increases efficiency. Fan design by one of the foremost fan engineers in the world. Model Description Flange Dia. Weight (lb) TXJF12 12" Jet Fan /4" FPT TXJF16 16" Jet Fan /4" FPT TXJF20 20" Jet Fan /4" NPT TXJF24 24" Jet Fan " NPT Inlet Max PSI Compressed Air Pressure (psi) Compressed Air Consumption (cfm) Air Flow (Free Flow) Avg RPM Price $2, $2, $2, $5, Accessories AM29 Grounding Clamp with 6 ft. of Wire $11.81 TXJFRF Jet Fan Refurbishing Kit $ TXJFRK Jet Fan Repair Kit $ Spare Parts Lists available at USA Airtoosl.com 2 USA-AIRTOOLS.COM

93 3 SWING GATE What is a Swing Gate? This device is used to provide an additional entry/exit point for a confined space. Typically, a fan is bolted directly to a tank flange. Once bolted in place, the opening can only be used by the fan for ventilating the confined space. A swing gate will still allow the opening to be used as a ventilation point, but it can also be used as an additional entry/exit point in case of emergency. A worker inside of a tank would need to gently push on the hand paddle that is molded into the casting. The fan will swing away and allow the worker to exit the space. A worker on the outside of a tank would merely pull on the flange of the Jet Fan to swing the fan away and allow for entry into the space. The flange is kept closed by a magnet. There are no locking devices. The magnet is a superior mechanism to our competitor's method of a hook & loop fastener (similar to Velcro). The magnet will not lose adhesion over time or deteriorate by weather. A slight bump or tug is all that is needed to push or pull the fan open. Mounting the Jet Fan on the Swing Plate with the air inlet towards the hinge will not inhibit the ability to open the gate. In addition, the Jet Fan's grounding wire should also be affixed on the hinge side of the unit. All exposed components are stainless steel or aluminum. Mounting flange configured to match tank flanges with holes starting in top center position OR level across the centerline. Our competitor's gates can only be used for flanges mounted with the top two holes level across the centerline. Heat treated to T6 aircraft aluminum specifications. Stainless Steel Shackle used for lifting point. Unit shipped with Stainless 1" bolts, flat washers, lock washers and nuts for attaching a Jet Fan to the Swing Plate. Part No. Description Price TXSG20 20" Swing Gate $2, TXSG24 24" Swing Gate $2, WATER DRIVEN FAN Shipped with supply-type fan blade unless exhaust blade is specified. Optional exhaust blades can be purchased separately. Not made in the USA Part No. Description Flange Dia. Weight (lb) Water Pressure (psi) Air Flow (Free Flow) Water Cons (gal/ min) Avg. Rpm Water Pressure (psi) Air Flow (Free Flow) Water Cons (gal/ min) Avg. RPM Price TXWD12 12" Water Driven Fan TXWD16 16" Water Driven Fan $3, $4,200 Accessories TXJFRF Jet Fan Refurbishing Kit $ TXJFRK Jet Fan Repair Kit $ USA-AIRTOOLS.COM 3

94 4 AIR DUCTING Our air ducting (TX-SAC-N-GO) is available in three sizes, 8", 12" and 16" diameters. The ducting is made of single-ply PVC coated polyester fabric with a spring steel wire helix and external PVC wear strip. The ducting has its own storage bag attached to the cuff end. Simply attach the cuff end to the air movement device and pull the opposite end from the bag and place into position. When finished, the hose can easily be put back into the bag for storage and carrying. Our design allows multiple bags to be combined for long duct runs. No additional connectors are needed. The end of one hose can be inserted into the cuff end of another. All ducting can be placed on either end of an air mover for fan. The hose can be used for supply or suction. The TX-SAC-N-GO-8 is designed to be used with the TX-3AM and TX-3AMS. The TX-SAC-N-GO-12 is designed to be used with the TX-6AM or the new TX-JF12 Jet Fan The TX-SAC-N-GO-18 is designed to be used with the TX-8AM, TX-10AM or the new TX-JF16 Jet Fan. NOT made in the USA Part No. Description Price TXSAC-N-GO-8 8" Ducting $ TXSAC-N-GO-12 12" Ducting $ TXSAC-N-GO-18 16" Ducting $ AIR RECEIVER TANKS Part Number Description Price 200ARV200 Vertical Air Receiver Tank - 2" NPT $1, ARV200C Caged Vertical Air Receiver Tank - 2" NPT $3, ARV200 Vertical Air Receiver Tank - 2" NPT $2, ARV200C Caged Vertical Air Receiver Tank - 2" NPT $2, ARV200 Vertical Large Size ASMI Vacuum Tank $2, ARV200 Vertical 60 Gallon Air Receiver Tank $ FM20H Horizontal Air Receiver Tank - 2" NPT $1, FM20HC Caged Horizontal Air Receiver Tank - 2" NPT $1, FM25H Horizontal Air Receiver Tank - 2" NPT $1, FM25HC Caged Horizontal Air Receiver Tank - 2" NPT $2, FM35H Horizontal Air Receiver Tank - 2" NPT $1, FM35HC Caged Horizontal Air Receiver Tank - 2" NPT $2, USA-AIRTOOLS.COM

95 5 Air Movers Venturi Type Air Movers Air movers, or air horns, are used wherever there is a need to disperse fumes, move air into confined spaces, cool men working in elevated temperature conditions, or cool machinery or products with a blast of directed air. Common applications are found in refineries, chemical plants, utilities and cogeneration units, metal fabrication plants, paper and pulp plants, shipyards, the marine industry and the steel industry. No moving parts Used for venting hazardous areas Maintenance is minimal Can be used as a blower or exhauster Operates on compressed air or steam Connection for ground wire Tested at an independent laboratory to AMCA Standard 210, equaling or exceeding the air flow of competitively manufactured air movers Shipped complete with grounding wire and crowsfoot Part No Description Inside Dia. of Base Overall Length Outside Dia. of Base Dia. at top of Horn NPT Size Bolt Circle Dia. Base Slot Dia. Weight (lb) TX3AM 3" Air Mover / $ TX3AMS 3" Air Mover / $ Short TX3AMSH 3" Air Mover / $ w/ Stainless Steel Horn TX6AM 6" Air Mover $ TX6AMP 6" Air Mover w/ Plastic Horn $ TX6AMSH 6" Air Mover $ w/ Stainless Steel Horn TX6AMS 6" Air Mover $ All Stainless Steel TX8AM 8" Air Mover $ TX10AM 10" Air Mover $ AMIS30 Air Mover Stand $ Price Spare parts lists available at USA-Airtools.com USA-AIRTOOLS.COM 5

96 6 VENTURI AIR MISTERS If you have a sufficient compressed air source and a potable water hose connection you can achieve a 10F to 30F drop in the ambient temperature throughout the path of air exiting the air mover (depending on the humidity of the ambient air). The optimum cooling begins after the first 10 feet of air exiting the end of the air horn diffuser. Atomized Mist - Water/air mixed "Atomized Mist" combined with compressed air powered air movement Evaporative Cooling - in arid climates. Provides evaporative cooling effect. Misting and Air - Misting amplified greatly by the air movement of the Venturi Air Mover. Outdoor Event - Hotspots in outdoor construction, turnarounds, shutdowns, outages. Reduces heat exhaustion Reduces heat stress Part No Description Total Air Flow (80 psi) Air Consumed (80psi) Weight (lb) Length Price VAM3S/S VAM3S Air Mister with Stand 1182 cfm 62 cfm $ VAM3S VAM3S Air Mister without Stand 1182 cfm 62 cfm 7 17 $ VAM3/S VAM3 Air Mister with Stand 1462 cfm 62 cfm $ VAM3 VAM3 Air Mister without Stand 1462 cfm 62 cfm 9 31 $ VAM6/S VAM6 Air Mister with Stand 3347 cfm 124 cfm $ VAM6 VAM6 Air Mister without Stand 3347 cfm 124 cfm $ VAM8/S VAM8 Air Mister with Stand 4929 cfm 193 cfm $1, VAM8 VAM8 Air Mister without Stand 4929 cfm 193 cfm $ VAM10/S VAM10 Air Mister with Stand 7304 cfm 274 cfm $1, VAM10 VAM10 Air Mister without Stand 7304 cfm 274 cfm $1, Spare Parts List Available at USA-Airtools.com 6 USA-AIRTOOLS.COM

97 7 AIR MANIFOLDS The Texas Pneumatic Air Manifold can be used in any industry where there is a need to have multiple outlets of air to supply various pneumatic tool simultaneously. The manifold comes with a 1-1/2" air inlet and can be dispersed through and up to six separate 3/4" Chicago couplings. Each outlet is regulated by a bronze safety lock on/off selfrelieving ball valve. For an adequate air supply to each tool use the formula: Air Tool Consumption x Number of Tools = CFM Required Part No. Description Weight (lb) Height Diameter Inlet Size No. of Outlets Price TX1AMF TX-1AMF Air Manifold /2 6 $1, TX10017 Air Manifold Filter Kit $31.08 AIR MANIFOLDS WITH WATER FILTER Water filters (particulate filters) produce clean, dry air at the tool preventing rust and clogging which reduces downtime of tools and saves money Conveniently manufactured to save you time Cage protects valves and makes it easy to roll around Ball valves control the number of outlets available Pressure relief valve provides protection against excessive pressure buildup Part No. Description Weight (lb) Height Diameter Inlet Size No. of Outlets Price TX1AMF-WF TX-1AMF-WF Air Manifold with Water Filter /2 6 $1, TX10017 Filter Replacement Kit $31.08 USA-AIRTOOLS.COM 7

98 8 A.S.M.E. CERTIFIED AIR MANIFOLDS Texas Pneumatic proudly introduces the TX-3AMF, the second in its series of ASME approved manifolds. This smaller version is much more accommodating to carry into confined spaces such as airliners for cabin and seat repair. It fits neatly into large toolboxes for storage. It can be equipped with universal (crowsfoot type) couplers or 1/4", 3/8" or 1/2" quick disconnect industrial couplers with hose barb plug included. Both sizes can be used in tandem to provide as many outlets as needed Keep work site uncluttered by having only one hose going to work area Both meet all OSHA guidelines: ASME approved tank ASME pop-off valve (200 psi) to prevent excessive pressure buildup Equipped with a gauge to monitor working pressure Brass drain cock to vent water droplets The larger air receivers/air manifolds provide a dual purpose for your air handling systems. They help to maintain a constant stable pressure and store a greater volume of air. They also provide a greater range of outlet sizes to match the required applications. Both have two 2" ball valves for use in high volume requirements such as sand blasting. For other requirements, they are equipped with four 1" ball valves and two 3/4" ball valves. A liquid filled pressure gauge helps to eliminate misreading caused by pulsation of air set up in the compression process. The drain cock is left slightly open to drain moisture from the air receiver. A high volume air relieving valve (spring loaded) is set to prevent the receiver from exceeding the maximum allowable working pressure of the air receiver by no more than 10% (a guideline of the ASME code). User ready on delivery Easily bolts to skids or other surfaces Multiple manifolds can be used in tandem Helps maintain a cleaner work site Part No. Description Weight (lb) Height Length Tank Dia. Tank Cir. Width Inlet Size No of Outlets Work Pressure (psi) Capacity (gal) Price TX2AMF TX-2AMF Air Manifold / $680 TX3AMF TX-3AMF Air Manifold $520 TX3AMF- QC500 TX3AMF- QC250 TX3AMF- QC375 TX-3AMF Air Manifold with 1/2" Quick Connect TX-3AMF Air Manifold with 1/4" Quick Connect TX-3AMF Air Manifold with 3/8" Quick Connect $ $ $570 TX4AMF TX-4AMF Air Manifold $1,320 TX5AMF TX-5AMF Air Manifold $1,395 TX750FRDD Paint Spray Air Filtering System $1,280 8 USA-AIRTOOLS.COM

99 9 FOUNDRY TOOLS Bench Rammer, Sand Rammer and Backfill Tamper The Texas Pneumatic rammers are proven in the field. They have a smooth-finished, black-oxided body. They are tough, yet easy to handle. These rammers can be used in various applications for foundry purposes, as well as constructionrelated areas. Made in USA High performance with minimum operator fatigue Easy start and stop features Lightweight rugged construction Adjustable packing gland Fast hitting Greatly improves the quality of casting in all types of foundry applications Tool Applications Packing Sand Packing plastic alumnea in fire walls Packing cast stone Part No Description Air Cons. (cfm) Stroke Weight (lbs) Bore BPM Taper Inlet Min Hose Size OAL Incl. Butt Price TX70B Sand Rammer oz /4" NPT 3/8 16 $415 TX8-2.5 Bench Rammer / /8 1/2 16-1/2 $525 TX8-4 Bench Rammer /8 1/2 21-1/2 $720 TX00 Sand Rammer /8 - - $320 TX6TN Backfill Tamper /2 - - $915 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 9

100 10 PAVING BREAKERS Paving Breakers The 90# Paving Breaker is designed for big jobs such as heavy demolition and concrete breaking. The 60# Paving Breaker is a versatile, hard-hitting tool that can be used for medium to heavy demolition work and concrete breaking, and is the perfect all around breaker. The 40# and 30# Paving Breaker is a rugged, yet lightweight paving breaker designed for light to medium construction work. It is ideally suited for plant maintenance work such as light demolition of floors, pavement, frozen ground and masonry walls and is very popular for bridge deck work. Thor Tools Part No Description Weight (lb) Length Bore Stroke BPM Chuck Size Air Inlet (NPT) Air Cons (cfm) TX30PB-7/8 30# Paving Breaker /8x3-1/4 3/8 49 $1,010 TX30PB-1 30# Paving Breaker x4-1/4 3/8 49 $1,010 TX40PBE 40# Paving Breaker x4-1/4 1/2x3 /4 56 $1,110 TX60PB-1-1/4 60# Paving Breaker /4x6 3/4 59 $1,120 TX60PB-1-1/8 60# Paving Breaker /8x6 3/4 59 $1,120 Price TX90PB-1-1/4 90# Paving Breaker /4x6 3/4 75 $1,215 TX90PB-1-1/8 90# Paving Breaker /8x6 3/4 75 $1,215 The TX30CD comes in a chuck sizes of either 7/8" x 3-1/4" or 1" x 4-1/4". The proper hose whip assembly for use with this tool is assembled with a TX1L lubricator. The tool requires 49 cfm at 90 psi for most efficient operation, and the TX1L is capable of delivering 70 cfm through the lubricator. It will allow the 49 cfm to pass through the tool at 90 psi and when filled with a high quality lubricant, the tool is adequately lubricated as it works. Part No. Description Weight (lb) Length Bore Stroke BPM Chuck Size Air Inlet (NPT) Air Cons. (cfm) TX30CD- 7/8 Clay Digger /8 x 3-1/4 3/8 49 $1,040 TX30CD-1 Clay Digger x 4-1/4 3/8 49 $1,040 Price Spare Parts List Available at USA-Airtools.com 10 USA-AIRTOOLS.COM

101 11 CHIPPING HAMMERS 4-Bolt Chipping Hammer With 2", 3" and 4" cylinder option, Texas Pneumatic offers a very complete range of chipping hammers for all types of construction and industrial applications. Quick Change Retainer for ease in changing tools Hose swivel so hose tracks operator movement Lubricator to enhance tool life Rugged construction for use in shipyards, refineries and oil field equipment manufacturers Price includes a TX-4HW Hose Whip Assembly and a 1291-TPT2 Deluxe Quick Change Retainer Texas Pneumatic is proud to offer chipping hammers completely made in the USA. We will guarantee the quality of this chipping hammer versus any chipping hammer in the world. Part No. Description Bore Piston Stroke BPM Hose Size Overall Length Air Cons (cfm) Weight (lb) Price TXCH2-4B-H 4-Bolt Chipping Hammer - Hex TXCH2-4B-R 4-Bolt Chipping Hammer - Rnd TXCH3-4B-H 4-Bolt Chipping Hammer - Hex TXCH3-4B-R 4-Bolt Chipping Hammer - Rnd TXCH4-4B-H 4-Bolt Chipping Hammer - Hex TXCH4-4B-R 4-Bolt Chipping Hammer - Rnd 1-1/ /2 14-1/ $ / /2 14-1/ $ / /2 15-1/ $ / /2 15-1/ $ / /2 16-1/ $ / /2 16-1/ $ Accessories TX4HW Hose Whip Assembly $ TPT2 Deluxe Quick Change Retainer $85.85 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 11

102 12 CHIPPING HAMMERS With 2", 3" and 4" cylinder option, Texas Pneumatic offers a very complete range of chipping hammers for all types of construction and industrial applications. Rocker valve assembly for less maintenance American quality forged steel handle Three sizes: 2", 3" and 4" stroke pistons Available with round or hex busing High quality alloy steel barrel Texas Pneumatic is proud to offer chipping hammers completely made in the USA. We will guarantee the quality of this chipping hammer versus any chipping hammer in the world. Part No. Description Piston Dia. Piston Stroke BPM Hose Size Overall Length Air Cons (cfm) Weight (lb) Price TXCH2-H Chipping Hammer - Hex 1-1/ /2 16-1/ $ TXCH2-R Chipping Hammer - Rnd 1-1/ /2 16-1/ $ TXCH3-H Chipping Hammer - Hex 1-1/ / / $ TXCH3-R Chipping Hammer - Rnd 1-1/ / / $ TXCH4-H Chipping Hammer - Hex 1-1/ /2 19-7/ $ TXCH4-R Chipping Hammer - Rnd 1-1/ /2 19-7/ $ Accessories TX4HW Hose Whip Assembly $ TPT2 Deluxe Quick Change Retainer $85.85 Spare Parts List Available at USA-Airtools.com 12 USA-AIRTOOLS.COM

103 13 ROCK DRILLS Part No. TX18HD TX30RD-3-1/4 TX30RD-4-1/4 TX60RD-3-1/4 TX60RD-4-1/4 TX60RD-1 Description 18# Hammer 30# Rock Drill 30# Rock Drill 60# Rock Drill 60# Rock Drill 60# Rock Drill Weight (lbs) Length Bore Stroke BPM RPM Chuck Size Air Inlet (NPT) Air Consumption (cfm) 7/8 x 3-1/4 7/8 x 3-1/4 7/8 x 4-1/4 7/8 x 3-1/4 7/8 x 4-1/4 1 x 4-1/4 3/8 1/2 1/2 3/4 3/4 3/ Price $1,325 $1,330 $1,330 $1,855 $1,855 $1,855 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 13

104 14 RIVET BUSTERS TX-133 Rivet Buster Pound for pound, there is no hammer with more hitting power than a rivet buster. Even a paving breaker would need to be at least twice as heavy to deliver an equivalent blow. This super-power can still be controlled thanks to low blow frequency and teasing throttle. That's why the rivet buster is one of the favorite tools of demolition contractors in the US. Users have discovered many new applications for rivet busters for working in both concrete and steel. No longer is the buster used exclusively by iron workers for forming and cutting rivets, but is has now found its way into the hands of operators who need the most powerful tool for the job. Guaranteed to be of the highest quality. American high tech made! Tenths of thousands clearance on the valve assembly Positive retention of rivet buster piston to prevent possible injuries Uses a steel throttle valve Two-step piston design Barrel cylinder has a bridge built in for safety - piston will not fall out or be shot out of tool avoiding personal injury Extra Features Jumbo safety retainer Rugged steel machined handle Adjustable exhaust deflector Heat treated polished steel barrel The TX-133RB is designed to operate at 90 psi. It is built to use jumbo steel and upper/lower sleeve and can be converted to run standard steel if desired. Shipped with hose whip assembly with filter lubricator, 2 upper sleeves, 2 lower sleeves, 2 rubber bumpers and 2 springs Part No. Description Stroke Weight (lb) Length Bore BPM Chuck Air Inlet Air Cons (cfm) Price TX133-6RB Rivet Buster 6" /16x Jumbo.866 3/8 44 $1,120 TX133-6RB-OT Rivet Buster 6" Outside Trigger /16x Jumbo.866 3/8 44 $1,120 TX133-8RB Rivet Buster 8" /16x Jumbo.866 3/8 44 $1,155 TX133-8RB-OT Rivet Buster 8" Outside Trigger /16x Jumbo.866 3/8 44 $1,155 TX133-11RB Rivet Buster 11" /16x Jumbo.866 3/8 44 $1,450 TX133-11RB- OT Rivet Buster 11" Outside Trigger /16x Jumbo.866 3/8 44 $1,450 Spare Parts List Available at USA-Airtools.com 14 USA-AIRTOOLS.COM

105 15 NEEDLE / CHISEL SCALERS TX1B Needle/Chisel Scaler Texas Pneumatic scalers have been proven throughout the industrial job sites, as well as construction and marine repair industry. Made in the USA World class value pricing Quality equal to or better than competitively made scalers Tools have been proven in thousands of applications Tens of thousands of these tools are in the field Completely convertible from needle to chisel scaler and visa versa Tool Applications De-rusting and cleaning metals Peening of welded joints Cleaning castings Cleaning welding slag Removing barnacles Removing paint, rust and dirt Chipping stone, concrete and brick Needle scalers adjust to any surface contour automatically Part No. Description Weight (lb) Length Air Cons (cfm) Bore Stroke BPM Inlet (NPT) Min Hose Size Price TX1BLTCS Chisel Scaler - Lever Throttle TX1BPTCS Chisel Scaler - Push Throttle TX1BLTNS Needle Scaler - Lever Throttle TX1BPTNS Needle Scaler - Push Throttle TX1BLTNSW7 Needle Scaler - Lever Throttle 5 15" with chisel 5 15" with chisel 7 17" with 5" needles 7 17" with 5" needles 7 19" with 7" needles / /4" 3/8 $ / /4" 3/8 $ / /4" 3/8 $ / /4" 3/8 $ / /4" 3/8 $225 TX1BLTNS- 2MM Needle Scaler - Lever Throttle 7 17" with 5" needles / /4" 3/8 $200 TX1BLTNS- 4MM Needle Scaler - Lever Throttle 7 17" with 5" needles / /4" 3/8 $200 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 15

106 16 NEEDLE / CHISEL SCALER Accessories TX1BLTNS-MK TX1B Millennium Needle Scaler Kit $ TX1BLTNS-VT Primary Vacuum Attachment Only $ TX1BLTNS-V Primary Vacuum Attachment Only w/ Case $ TX1BLTNS-VK Vacuum Attachment Complete $ TX1BCOCS-NR Coke Oven Chisel Scaler (Non-Revolving) $ TX456TS-FT Tomato State Tool $ TX1BNSRK TX1B Needle Scaler Repair Kit $ TX1BCSRK TX1B Chisel Scaler Repair Kit $43.08 Chisels and Needles TX " Flat Chisel (3/4" W) $7.96 TX /2" Spoon Chisel (1-3/8" W) $8.56 TX /2" Flat Chisel (1-3/8" W) $8.56 TX " Hardened Blank Chisel $6.26 TX00051N 12" Flat Chisel (3/4" W) $10.12 TX00051W 12" Flat Chisel (1-3/8" W) $10.93 TX " Spoon chisel (1-3/8" W) $10.93 TX00054N 18" Flat Chisel (3/4" W) $12.96 TX00054W 18" Flat Chisel (1-3/8" W) $13.41 TX " Spoon chisel (1-3/8" W) $13.41 TX00018 Needles - Stainless 5" $1.08 TX00019 Needles - Stainless 7" $1.29 TX " x.125 Steel Scaler Needle $1.00 TX " x.125 Steel Scaler Needle $1.00 TX " x 0.78 (2mm) Steel Scaler Needle $1.00 TX " x.117 (3mm) Steel Scaler Needle $1.00 TX " x.157 (4mm) Steel Scaler Needle $1.00 TX " x.125 Beryllium Cooper Needle $2.42 TX " x.125 Beryllium Cooper Needle $3.01 Spare Parts List Available at USA-Airtools.com 16 USA-AIRTOOLS.COM

107 17 LONG REACH SCALER Long Reach/Push Throttle Chisel Scaler This tool hits twice as hard as a regular scaler. It has a 2" stroke on the piston compared to 1-1/4" on the TX1B. Proudly made in the USA World class value pricing Quality equal to or better than competitively made scalers Tool Applications Long Reach Scaler Tile and non-skid removal Grease and paint removal Glue and resin removal Barnacle and heavy scale removal Push Throttle Scaler For use in foundry casting cleaning Part No. Description Stroke Length Weight (lb) Bore Inlet Min. Hose Size Air Cons (cfm) BPM Price TX2LRCS Long Reach Scaler 2 48 or /16 1/2 1/ $555 TX2PTCS Push Throttle Scaler /2" 6 15/16 1/4 3/ $395 TX2LR-RK Long Reach Scaler Repair Kit $93.71 Chisels and Scraper Blades TX20000 Chisel - 3" x 9" Flat Chisel $33.64 TX20029 Chisel - 3/4" x 5-1/2" Flat Chisel $13.07 TX20030 Chisel - 1-3/8" x 5" Flat Chisel $13.98 TX20031 Chisel - 1-3/8" x 5" Spoon Chisel $13.98 TX20100 Blade Holder Only $69.76 TX20104 Scraper Blade - 4" with Holder $83.53 TX20108 Scraper Blade - 8" with Holder $86.03 TX20112 Scraper Blade - 12" with Holder $88.54 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 17

108 18 PISTON TYPE SCALERS S1 Single Piston Scaler Rugged steel body Lever operated snap handle Optional brass air cock valve available Variety of pistons available Proudly made in USA Tool Applications Removing rust and paint Removing cement from steel Roughing cement Used in more compact areas where the T3 will not fit T3 Triple Piston Scaler Rugged steel body Lever operated snap handle Optional brass air cock valve available Variety of pistons available Proudly made in USA Tool Applications Removing rust and paint Removing cement from steel Roughing cement Piston scalers can be used in areas that standard model scalers will not fit Part No. Description Stroke Length Weight (lb) Bore Inlet (NPT) BPM Min Hose Size Air Cons (cfm) S1 Single Piston Scaler 13/ / /8 9 $ S1-AC Single Piston Scaler with Air 13/ / /8 9 $ Cock Handle T3 Triple Piston Scaler 13/ / /8 15 $ T3-AC Triple Piston Scaler with Air Cock Handle 13/ / /8 15 $ Replacement Pistons TX00146 Standard Steel Piston $47.62 TX00147 Standard Steel (2" longer than standard) $53.01 TX00149 Carbide Tipped Piston - Chisel Point $ TX00150 Carbide Tipped Piston - Star Point $ TX00151 Rexalloy: Solid Cobalt Alloy Pistons - Star Point $ TX00155 Rexalloy: Solid Cobalt Alloy Pistons - Chisel Point $ Repair Kits S1RK S1 Single Piston Scaler Repair Kit $23.59 T3RK T3 Triple Piston Scaler Repair Kit $ Price Spare Parts List Available at USA-Airtools.com 18 USA-AIRTOOLS.COM

109 19 AIR SCRIBE TXAS1 Air Scribe The Texas Pneumatic Air Scribe is lightweight and easy to operate. It is designed to write on a variety of materials such as steel, glass, plastic, and wood. It can be used for deburring, trimming and removing broken studs on small applications. Made in USA Comes in convenient carrying case Equipped with a flexible hose and filter with 3/8" NPT fitting Will write on a variety of materials Carbide-tipped stylus for longer life Hardened piston for longer life Steel housing for durability Adjustable throttle for a variety of jobs Vibrating tip for all uses Description Part No. Weight (oz) Air Cons. (cfm) Air Inlet Hose Size Length Min. Suppy Air Hose Size Price Air Scribe with Carrying Case TXAS1 13 <1 1/4 1/4 5 3/8 $ Accessories TXAS1RK Air Scribe Repair Kit $23.59 TX21019 Stylus Tip $14.27 TX21020R Round Nose Chisel $11.63 TX21020F 1/4" Flat Chisel $8.96 TX21020B Blank Chisel $7.15 TX21020M Moil Point $11.63 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 19

110 20 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINERS FOR CHIPPING HAMMERS PART NO DESCRIPTION 1090 Easily adapted to light chipping and scaling hammers. Retainer MUST be removed fro hammer barrel to change tool. To change tool, pull #1094 lock spring entirely out of slot in retainer and slide retainer off barrel For use where frequent change of tools is NOT required. This retainer must be removed from hammer barrel to change tools. To remove retainer from hammer barrel, pull #1194 lock spring entirely out of slot in retainer and slide retainer off barrel. PRICE $52.53 $ R For use with tool furnished with ROUND collar. Similar to #1190 series retainer. This retainer must be removed from hammer barrel to change tool. To remove retainer from hammer barrel, pull #1194 lock spring entirely out of slot in retainer and slide retainer off barrel. #1199 rubber bumper is recommended to cushion bottom of retainer housing. $ For use where frequent tool change is necessary. It is NOT necessary to remove retainer from hammer barrel to change tools. Tool changes quickly by lifting end of flat spring on outside of retainer to release lock pin, rotate tool 1/4 turn, remove tool. Insert new tool and rotate 1/4 turn until lock pin snaps in place. $ For instant change of tools on production work in mills, foundries, or factories. It is NOT necessary to remove retainer from hammer barrel, or to lift flat spring to change tools. Tools changed quickly simply by pushing upward into hammer. Round shank: turn tool approx. 1/4 turn. Hex shank: Hold tool, turn retainer approx. 1/4 turn. After tool is unlocked it can be removed through bottom of retainer. Reverse procedure when inserting new tool Oval Collar Threaded Barrel For use with threaded barrel chipping hammers when frequent tool change is involved. Operation similar to #1191 quick change retainer. Held onto threaded barrel by # pressure spring Designed for use with chipping hammer. Either standard width or wide blade chisel with round collar can be used. Retainer must be removed from hammer barrel to change tool. #1194 lock spring holds retainer on hammer barrel. #1199 rubber bumper cushions tool against bottom of retainer body Quick Change Retainer is designed for changing of tool without removal of retainer from hammer barrel $61.22 $78.75 $80.56 $81.84 Call our office or visit our web site USA-Airtools.com for the specific size of retainer for your tool. Spare Parts List Available at USA-Airtools.com 20 USA-AIRTOOLS.COM

111 21 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINERS FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION 1197 The 1197 retainer was designed for changing the tool without removal of retainer from the hammer barrel. The tool is changed simply by pushing the tool upwards in the hammer and turning 1/4 turn and then downwards. Insert tool from the bottom of the retainer and turn 1/4 turn to look the tool in place. Steel segments hold the retainer on the barrel, and its design is OSHA approved for maximum safety Designed special for chipping hammers with threaded barrel. This retainer must be removed from hammer barrel to change tools. Retainer threads onto barrel and is held in place by # pressure spring. #1199 rubber bumper is recommended to cushion bottom of retainer housing. For use with ROUND COLLAR tools only. Maximum blade width is 1. Wider width than 1, use 1198W for up to 1-1/8 chisels PRICE $ $ Model 1291 Deluxe Quick change retainer is designed for rapid changing of tools without removal of retainer from hammer barrel. Tool changes quickly by pulling back sleeve to unlock tool in retainer. Releasing sleeve back to normal position locks tool in retainer. Any width blade chisels can be used with this retainer, as well as both round and oval collar tools Retainer engineered to fit both threaded or grooved barrel. Held on barrel with #2194 lock spring. Reinforced body construction assures long service life Characteristic of Arrow Tools quality construction, this retainer is built of high grade steel hardened throughout for reliable performance and long service when used with 81X or 11X rivet buster. Lock spring #2194 used to hold retainer on hammer barrel. 160 Model 160 retainer is designed to fit standard riveting hammer and is to be used with rivet sets. #194 lock spring is used to hold retainer on hammer barrel and #1194 us used to hold rivet set in retainer. 190 Extra heavy duty retainer designed to withstand shock and give long dependable service when used with rivet hammers. Lock spring #194 used to hold retainer on hammer barrel. $85.85 $99.97 $76.25 $72.78 $71.00 Call our office or visit our web site USA-Airtools.com for the specific size of retainer for your tool. Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 21

112 22 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINER ACCESSORIES FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION PRICE 1501 Upper Sleeve 190 Retainer. Used with over size 1-11/32 dia. Bore and 1500 tool 1502 Upper Sleeve 190 Retainer. Used with standard 1-7/32 dia. Bore and 1500 tool $10.19 $ Upper Sleeve 190 Retainer. Parker Taper bore and 1500 tool $ Upper Sleeve 190 Retainer. Straight bore and 2000 tool $ Upper Sleeve 2190 and 1851 Retainer. Parker taper bore and 2000 tool $ Upper Sleeve 2190 and 1851 Retainer. Standard bore and 2000 tool $ Upper Sleeve 2190 and 1851 Retainer. Standard bore and 1500 tool $ SHORT Jumbo Upper Sleeve short $ Lower Sleeve 190 Retainer. Used with 1500 tool $ S Lower Sleeve 190 Retainer. Split sleeve used with 1500 tool $ Lower Sleeve 190 Retainer. Used with 2000 tool $ S Lower Sleeve 190 Retainer. Split sleeve used with 2000 tool $ Lower Sleeve 2190 & 1851 Retainer. Used with 2000 tool $ S Lower Sleeve 2190 & 1851 Retainer. Split sleeve used with 2000 tool $ Lower Sleeve 2190 & 1851 Retainer. Used with 1500 tool $ S Lower Sleeve 2190 & 1851 Retainer. Split sleeve used with 1500 tool $ Rubber Bumper used with lower sleeve #1504, 2003, 192 $ Rubber Bumper used with 2103 lower sleeve black $ Rubber Bumper used with 2103 lower sleeve gray heavy duty $ Rubber Bumper used with 2103 lower sleeve red plastic heavy duty $ Rubber Bumper used with 2103 lower sleeve orange urethane $4.27 heavy duty 1094 Lock Spring used with 1090 retainer $ Lock Spring used with 1190, 1191, 1192, and 1195 retainer $ Lock Spring used with 190 retainer $ Lock Spring used with 2190 and 1851 retainer $1.80 Spare Parts List Available at USA-Airtools.com 22 USA-AIRTOOLS.COM

113 23 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINER ACCESSORIES FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION PRICE Rotating Insert used with 1191 and 119e retainer $ Rotating Insert used with 1192 and 1197 retainer $ Rotating Insert used with 1197 retainer $ Insert Spring used with 1191, 1192, 1193, and 1197 retainer $ Flat Spring & Pin used with 1191 and 1193 retainer $ Flat Spring & Pin used with 1192 and 1197 retainer $ Pressure Spring used with 1198 and 1193 retainer $ Rubber Bumper Used with 1195, 1195R and 1198 Retainer. Note. Conversion kit #2035 converts riveting hammer to rivet buster so jumbo tools can be used $ Steel Segment pkg of 8 for use with 1197 retainer $7.57 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 23

114 24 FILTER-REGULATOR-LUBRICATOR SYSTEMS Portable Filter, Regulator, Lubricator Systems Protected by a heavy-duty galvanized steel cage Galvanized protective cage to prevent rust in offshore/marine environments Pre-filter Y strainer to trap large debris and sludge extends the life of automatic drain on filter unit Particulate filter to remove harmful oil/water condensate, pipe scale, dirt and rust from the compressed air supply Regulator with gauge for precise PSI control Lubricator that maintains the same air/oil ratio regardless of variations in air flow to reduce equipment maintenance and prolong tool or hoist life. Part No. Description Max Flow (cfm) TX1/2"MF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer, F384FW particulate filter with automatic drain, R374G regulator with gauge and L484W lubricator TX3/4"HF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer, F329-06FW particulate filter with automatic drain, R376G regulator with gauge and 4106 lubricator TX1"HF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer F329-08FW particulate filter with automatic drain R398G regulator with gauge and 4108W lubricator TX1-1/2"HF-FRL Unit assembled in galvanized cage with 4 prong crowsfoot to crowsfoot. Y strainer F329-12FW particulate filter with automatic drain, R3912G regulator with gauge and 4112 lubricator Filter Regulator Lubricator Assembly Mounted In-Line Sold with or without protective cages All unites come assembled with a Y-Strainer and metal bowls FW - Internal Float Drain Part No Particulate Filter Regulator Lubricator Max Flow (cfm) FW Internal Float Drain G With Gauge W With Sight Disk NPT Size Price 142 1/2 $ /4 $ $ /2 $ NPT 1FRL1/2 F384-FW R374G L484W 165 1/2 $ FRL3/4 F329-06FW R376G 4106W 175 3/4 $ FRL1 F329-08FW R378G 4108W Call 4FRL1.5 F329-12FW R3912G 4112W /2 $ Price Spare Parts List Available at USA-Airtools.com 24 USA-AIRTOOLS.COM

115 25 FILTER-REGULATOR-LUBRICATOR SYSTEMS Tri-Stage: Filtering Systems Extreme Clean/Dry Air Removal of water, oil, aerosols and sub-micron particles from the compressed air supply F - Internal Float Drain T - External Float Drain W - With Sight Disk Part No. F-3 Particulate Filter F-4 Oil Removing Filter F-5 Coalescing Filter Max Flow (cmf) NPT Price TSF1/2 F384W F484W F584W 110 1/2 $ TSF3/4 F329-06FW F405-06FW F505-06FW 110 3/4 $ TSF1 F329-08FW F405-08FW F505-08FW $ TSF1-1/2 F329-12FW F408-12FW F508-12FW /2 $1, TSF1-1/2A F3N1-12TW F418-12FW F518-12FW /2 $3, TSF2 F3N1-16TW F428-16TW F528-16TW Call TSF3 F3AN2M-24DF F4AN2M-24DF F5AN2M-24DF $8, Paint Spray - Air Filtering / Air Drying Rental Ready, User Ready Pre-filter Y strainer to trap large debris and sludge. Extends the life of the automatic float drain on the particulate filter Particulate filter to remove harmful oil/water condensation, pipe scale, dirt and rust from the compressed air supply which extends the life of the coalescing filter element Regulator with gauge for precise PSI control to the spray gun Third stage coalescing filter brings high levels of filtration of oil, aerosols, and sub-micron particles, which extends the life of the desiccant in the desiccant dryer. Desiccant Dryer where the air is distributed uniformly through the fill desiccant bed and then dry air exits at the bottom of the desiccant bed into the intake tube and out the outlet port of the unit to the spray gun. Part No. Description Max Price Flow (cfm) TX1/2"FRDD Y-Strainer, F384FW Particulate Filter, F584FW Coalescing 25 Call Filter, R374G Regulator and D10-04SL Desiccant Dryer TX3/4"FRDD Y-Strainer, F329-06FW Particulate Filter, F505-06FW Coalescing Filter, R376G Regulator, and D25-06 Desiccant Dryer 50 $1, USA-AIRTOOLS.COM 25

116 26 Components Listing Y Strainer Part No NPT Size Description Price Y-003 1/2 20x20 Mesh CALL Y-004 3/4 20x20 Mesh $31.24 Y x20 Mesh CALL Y /4 20x20 Mesh CALL Y /2 20x20 Mesh CALL Y x20 Mesh CALL Particulate Filter Part No. Pipe Size Max Flow (cfm) Bowl Capacity (oz) Price F384-FW 1/ $ F329-06FW 3/ $ F329-08FW $ F329-12FW 1-1/ $ F358HF-12FW 1-1/ CALL F3N1-12TW 1-1/ CALL F3N1-16TW $ F3NHF-25TW CALL F3AN2M-24TW ASME CALL F3X3-32FW 4 (flanged) 4000 ASME CALL F3X4-48FW 6 (flanged) 5800 ASME CALL Regulator Part No Pipe Size Max Flow (cfm) Price R374G 1/2 215 $76.48 R376G 3/4 220 $76.48 R398G $ R3912G 1-1/2 700 $ Lubricator Part No Pipe Size Max Flow (cfm) Bowl Capacity (oz) Price L484W 1/ $ W 3/ $ W $ W 1-1/ $ USA-AIRTOOLS.COM

117 27 Coalescing Filters Part No Pipe Size Max Flow (cfm) Price F584-FW 1/2 90 $ F505-06FW 3/4 150 $ F505-08FW $ F508-12FW 1-1/2 310 CALL F510-12TW 1-1/2 415 CALL F518-12TW CALL F510-16TW CALL F5AN2M-24DF 3" ASME 1360 CALL F5AX2L-32DF 4" ASME flanged 1750 CALL F5AX3L-48DF 6" ASME flanged 2400 CALL Oil-Removing Filter Part No Pipe Size Max Flow (cfm) Price F484FW 1/2 116 $ F405-06FW 3/4 185 $ F405-08FW $ F408-12W 1-1/2 400 $1, F418-12TW 1-1/2 590 CALL F2AN2M-24DF 3" ASME 1700 CALL Desiccant Dryers Part No Pipe Size Max Flow (cfm) Price D10-04XL 1/ CALL D / $ DFD-10 1/4" MPTx1/4" FPT 15 2 Pack Disposable Desiccant Dryer $23.40 USA-AIRTOOLS.COM 27

118 28 In-Line Filter Lubricators One of the most common repairs an air tool undergoes is disassembly to clean foreign material out of the valve assembly. In-Line Filter Lubricators help prevent this from happening. The 40 micron filter can easily be cleaned or replaced. These are heavy-duty in-line lubricators to be installed 6-8 feet from tool. Designed for use with tools being used too far away from compressor to be lubricated by a permanently mounted unit. Lubricator filter unit is an integral unit Accepts a 40 micron bronze filter Reduces down time Prevents costly repairs Extends air tool life Casting design prevents breakage where a nipple has been used to connect filter to lubricator Adjustable metering valve Sight disk in housing to visually inspect oil level These lubricators can be used on everything from an air scribe to a paving breaker. Part No. Description Capacity (Fl Oz) Hose Barb Pipe Size Max. Working Pressure Oil Wt. Req. Air Flow Capacity at 70psi TX0L-F In-Line Filter Lubricator 1.4 1/2" NPT WT 30 $57.80 TX1L-F In-Line Filter Lubricator 3.7 3/4" NPT WT 70 $64.04 TX2L-F In-Line Filter Lubricator /4" NPT WT 70 $71.66 TX1/4L In-Line Lubricator 1/4" NPT 10 WT $28.88 TX0L In-Line Lubricator 1.4 1/2" NPT WT 30 $40.59 TX1L In-Line Lubricator 3.7 3/4" NPT WT 70 $43.39 TX2L In-Line Lubricator /4"NPT WT 70 $53.72 TX3L In-Line Lubricator " NPT WT 150 $64.04 TX0L-PR TX-0L w/ Presure Relief Cap 1.4 1/2" NPT WT 30 $44.29 TX0L-F-PR TX-0L-F w/ Pressure Relief Cap 1.4 1/2" NPT WT 30 $65.87 TX1L-PR TX-1L w/ Pressure Relief Cap 3.7 3/4" NPT WT 70 $49.97 TX2L-PR TX-2L w/ Pressure Relief Cap /4" NPT WT 70 $61.32 TX3L-PR TX-3L w/ Pressure Relief Cap " NPT WT 150 $72.68 TX2L-CF Constant Feed TX-2L Lubricator /4" NPT WT 70 $72.39 TX3L-CF Constant Feed TX-3L Lubricator " NPT WT 150 $82.73 Price Spare Parts List Available at USA-Airtools.com 28 USA-AIRTOOLS.COM

119 29 Hose Whip Assemblies with Lubricators All USA made components 300# working pressure Absolute oil resistance Solid band clamps Equipped with spring guard at tool end Standard 6' length Part No. Chicago Coupling Lubricator Hose Connector Price TX1HW Crows Foot TX-0L 6' 300psi 1/2" ID 1/4" MPT $54.11 TX2HW Crows Foot TX-0L 6' 300psi 1/2" ID 3/8" MPT $54.11 TX3HW Crows Foot TX-0L 6' 300psi 1/2" ID 1/2" MPT $54.11 TX4HW Crows Foot TX-0L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $67.05 TX4HW1/2 Crows Foot TX-0L 6' 300psi 1/2" ID 1/2" Swivel $70.40 TX5HW Crows Foot TX-1L 6' 300psi 1/2" ID 3/8" MPT $61.32 TX6HW Crows Foot TX-1L 6' 300psi 1/2" ID 1/2" MPT $61.32 TX7HW Crows Foot TX-1L 6' 300psi 1/2" ID 3/4" MPT $61.32 TX8HW Crows Foot TX-1L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $74.67 TX8HW1/2 Crows Foot TX-1L 6' 300psi 1/2" ID 1/2" Swivel $74.67 TX9HW Crows Foot TX-1L 6' 300psi 1/2" ID Crows Foot $61.32 TX10HW Crows Foot TX-2L 6' 300psi 1/2" ID Crows Foot $74.67 TX11HW Crows Foot TX-2L 6' 300psi 1/2" ID 1/2" MPT $74.67 TX12HW Crows Foot TX-2L 6' 300psi 3/4" ID 3/4" MPT $71.38 TX12HW1/2 Crows Foot TX-2L 6' 300psi 3/4" ID 1/2" MPT $71.38 TX13HW Crows Foot TX-2L 6' 300psi 3/4" ID 1" MPT $74.78 TX14HW Crows Foot TX-2L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $74.78 TX15HW Crows Foot TX-3L 6' 300psi 3/4" ID Crows Foot $ TX16HW Crows Foot TX-3L 6' 300psi 3/4" ID 3/4" MPT $ TX17HW Crows Foot TX-3L 6' 300psi 3/4" ID 1" MPT $ Hydraulic Hose Whip Assemblies TX3HW-HYD TX-0L 6' 1/2" ID 1/2" MPT $69.85 TX4HW-HYD TX-0L 6' 1/2" ID TX Swivel $91.70 TX6HW-HYD TX-1L 6' 1/2" ID 1/2" MPT $74.67 TX11HW-HYD TX-2L 6' 1/2" ID 1/2" MPT $90.85 TX ' 1/2" ID 1/2" MPT both ends $41.90 USA-AIRTOOLS.COM 29

120 30 Hose Whip Assemblies with Lubricators All USA made components 300# working pressure Absolute oil resistance Solid band clamps Equipped with spring guard at tool end Standard 6' length Part No. Chicago Coupling Lubricator Hose Connector Price Hose Whip Assemblies with Combination In-Line Filter Lubricator TX1HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/4" MPT $72.68 TX2HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 3/8" MPT $72.68 TX3HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT $72.68 TX4HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $84.03 TX4HW1/2-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $84.03 TX5HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/8" MPT $73.82 TX6HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT $73.82 TX7HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/4" MPT $73.82 TX8HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $87.44 TX8HW1/2-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $87.44 TX9HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID Crows Foot $72.68 Steel Hose Ends for Use With Combination In-Line Filter Lubricator Hose Whip Assemblies TX /2" MPT TX-0L-F 1/2" ID 1/2" Barb $9.50 TX /2" MPT TX-0L-F 3/4" ID 3/4" Barb $10.45 TX /4" MPT TX-1L-F 1/2" ID 1/2" Barb $10.45 TX /4" MPT TX-1L-F 3/4" ID 3/4" Barb $ USA-AIRTOOLS.COM

121 31 Hose Swivels Part No. Description Price TX /8"-24 Thd x 1/2" Hose Barb $18.94 TX /8"-20 Thd x 1/2" Hose Barb $18.94 TX /2" NPT Thd x 1/2" Hose Barb $20.92 TX00407S 3/8" x 1/2" Hose Barb - Straight Swivel $11.43 TX /2" NPT Pipe Thd x 1/2" Hose Barb $20.92 TX /8"-24 Thd x 3/8" Female NPT End $25.60 TX /8"-20 Thd x 3/8" FPT $25.60 TX /2" NPT Pipe Thd x 3/8" FPT $25.60 TX /8"-24 Thd x 3/8" MPT $18.94 TX /8"-20 Thd x 3/8" Male NPT End $18.94 Quick Disconnect Couplings TXB2S2-S 1/4" Steel Plug x 1/4" Hose Barb $2.28 TXB2M2-S 1/4" Steel Plug x 1/4" Male NPT $1.30 TXB2F2-S 1/4" Steel Plug x 1/4" Female NPT $1.37 TX2CS2-B 1/4" Brass Coupler x 1/4" Hose Barb $7.02 TX2CM2-B 1/4" Brass Coupler x 1/4" Male NPT $5.74 TX2CF2-B 1/4" Brass Coupler x 1/4" Female NPT $5.46 TXB2S3-S 1/4" Steel Plug x 3/8" Hose Barb $2.37 TXB2M3-S 1/4" Steel Plug x 3/8" Male NPT $2.10 TXB2F3-S 1/4" Steel Plug x 3/8" Female NPT $2.93 TX2CS3-B 1/4" Brass Coupler x 3/8" Hose Barb $6.90 TX2CM3-B 1/4" Brass Coupler x 3/8" Male NPT $6.29 TX2CF3-B 1/4" Brass Coupler x 3/8" Female NPT $6.32 TX2BM2-B 1/4" EZ Quick Connect Brass Coupler x 1/4" MPT $9.48 TX2BM3-B 1/4" EZ Quick Disconnect Brass Coupler x 3/8" MPT $9.60 USA-AIRTOOLS.COM 31

122 32 Screened Inlet Bushings Brass screens trap debris to prolong tool life Inlet bushing are heat-treated and black-oxided Protects against corrosive damage and improves performance Part No Description Price TX /4" MPT X 1/4" FPT $3.48 TX /4" MPT X 3/8" FPT $3.48 TX /8" MPT X 1/4" FPT $3.48 TX /8" MPT X 3/8" FPT $3.48 TX /8" MPT X 1/2" FPT $4.13 TX /2" MPT X 3/8" FPT $4.13 TX /2" MPT X 1/2" FPT $3.48 TX /8"-20 Thd Permanent Bushing x 3/8" MPT $3.48 TX /8"-24 Thd Permanent Bushing x 3/8" MPT $3.82 In-Line Air Tool Filter Standard 40 micron which ensures minimum pressure drops Provides particle-free air to tools Available in micron filtration on special order Lightweight aluminum housing Part No. Description NPTF Size Length Hex Price TX9071 1/8" FPT (In) x 1/8" MPT (Out) 1/8 2-3/16 3/4 $7.46 TX9072 1/4" FPT (In) x 1/4" MPT (Out) 1/4" 2-5/16 3/4 $10.09 TX9074 1/2" Female Thread - Both Ends 1/2 3-1/4 1-1/2 $23.85 AirPostDrivers.com TX9074M 1/2" Female Thread (In) x 1/2" Male Thread (Out) 1/2 3-1/4 1-1/2 $25.45 TX9076 3/4" Female Thread - Both Ends 3/4 3-1/4 1-1/2 $27.13 TX9076M 3/4" Female Thread (In) x 3/4" Male Thread (Out) 3/4 3-1/4 1-1/2 $ USA-AIRTOOLS.COM