CLIMA-ZONE TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS. Ductable EC system, by constant pressure zones

Size: px

Start display at page:

Download "CLIMA-ZONE TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS. Ductable EC system, by constant pressure zones"

Bennett Chase
5 years ago
Views:

1 TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS Ductable EC system, by constant pressure zones

Description Advantages CLIMA-ZONE is a terminal water-cooled

up of: a galvanised steel shell, M1-insulated an EC motor with very low

additional 1 row coil, optional a two-way or four-way valve, depending

from behind or from below A plenum equipped with 2 to 6 24VDC motorised

9 in diameter a regulation system, which controls the hot and/or cold

thermostats Easy to install, thanks to its "plug and play" architecture

6 in/h20) Low sound power Very low energy consumption, thanks to its

individual wallmounted boiler, a communal boiler, a heat pump or an

System can be installed in both individual and communal dwellings, as

2 Description Advantages CLIMA-ZONE is a terminal water-cooled air-conditioning unit equipped with: a ETL/UT-certified fan coil, made up of: a galvanised steel shell, M1-insulated an EC motor with very low energy consumption a 3 or 4 row coil, depending on configuration an additional 1 row coil, optional a two-way or four-way valve, depending on the configuration a G4 suction filter which can be dismantled either from behind or from below A plenum equipped with 2 to 6 24VDC motorised dampers with: low consumption with 7.9 in diameter a regulation system, which controls the hot and/or cold valves as well as the motorized zone dampers Remote control zone thermostats Easy to install, thanks to its "plug and play" architecture Compact size Higher static pressure (from 0 to 0.6 in/h20) Low sound power Very low energy consumption, thanks to its "Brushless" EC technology This air treatment unit can be connected to an individual wallmounted boiler, a communal boiler, a heat pump or an urban heating network Wireless remote control Simple configuration System can be installed in both individual and communal dwellings, as well as in small and medium-sized business premises A constant pressure regulator for adapting the flow rate according to the needs of each of the rooms being heated/cooled. 2 Aermec

its regulated motorised dampers, was designed for use in residential

It unites outstanding thermal and acoustic comfort, while

Connected to a centralized production system (air/water heat boiler

along with the AERMEC fan coil, is compliant with RT2012 regulations.

adjusting the airflow according to the current needs of each of the

In order to control the temperature, users simply need to use the

The "brushless" electric motor is the result of the fusion of some

fields. The "brushless" motor, is literally that - without a brush.

magnetic fields of which interact, without any form of mechanical

An inverter allows the user to control the speed and the torque of

3 73.4 F 71.6 F 77 F Calibrated regulation EC brushless motor The plenum, with its regulated motorised dampers, was designed for use in residential and tertiary environments. It unites outstanding thermal and acoustic comfort, while guaranteeing energy savings. Connected to a centralized production system (air/water heat boiler pump, water/water heat pump, or centralized production), CLIMA-ZONE along with the AERMEC fan coil, is compliant with RT2012 regulations. CLIMA-ZONE allows for the ambient temperature to be regulated by adjusting the airflow according to the current needs of each of the rooms to be heated/cooled. In order to control the temperature, users simply need to use the radio remote control, supplied as standard. The "brushless" electric motor is the result of the fusion of some of the most advanced technologies in the mechanical and electrical fields. The "brushless" motor, is literally that - without a brush. On the "brushless" electric motor, there are no sliding contacts between the impeller and the stator. In brushless motors, the rotor is composed of permanent magnets, the magnetic fields of which interact, without any form of mechanical contact, with the stator winding. An inverter allows the user to control the speed and the torque of the rotor in a continuous manner, by simply adjusting the stator currents. The brushless motor offers enormous advantages over traditional, alternative current (AC) motors, including: reduced wear less maintenance ability to accurately and continuously adjust the rotation speed (0-100%) increased energy efficiency improved life span and superior reliability Aermec 3

4 Selected combination - fan coil and plenum Technical data Plenum connections Fan coil Static Total Total Cooling Air pressure power capacity capacity Total flow available absorbed power (3) 158 F (1) 122 F (2) 44.6/53.6 F Number of taps cfm In / H2O W BTU BTU BTU db(a) FCXI20P FCXI20P PMZ22 FCXI24P FCXI24P PMZ22 FCXI30P FCXI34P FCXI40P FCXI44P FCXI50P FCXI54P FCXI80P FCXI84P VED030I VED040I VED130I VED140I VED230I VED240I VEDI330I VED340I VED530I VED540I VED730I VED740I FCXI30P FCXI34P FCXI40P FCXI44P VEDI030 PMZ22 VEDI040 PMZ22 VEDI130 VEDI140 VEDI230 VEDI240 FCXI30P FCXI34P FCXI40P FCXI44P FCXI50P FCXI54P FCXI80P FCXI84P VEDI130 VEDI140 VEDI230 VEDI240 VEDI330 VEDI340 FCXI40P FCXI44P FCXI50P FCXI54P FCXI80P FCXI84P VEDI230 VEDI240 VEDI330 VEDI340 VEDI530 PMZ504 VEDI540 PMZ504 VEDI530 PMZ505 VEDI540 PMZ505 VEDI730 PMZ705 VEDI740 PM705 VEDI730 PMZ706 VEDI740 PMZ706 Note (1) 4 pipes system configuration (with additional heat exchanger) (EUROVENT) Room air temperature 68 F b.s.; Inlet water temperare 158 F; ΔT water 50 F 1(2) 2 pipes system configuration (EUROVENT) Room air temperature 68 F b.s.; Inlet water temperare 122 F; Water flow rate as in cooling mode Cooling (EUROVENT) Ambient air temperature 80.6 F d.b./66.2 F w.b.; Inlet water temperature 44.6 F; ΔT water 41 F (3) Sound power based on the measurements carried out in accordance with Eurovent 8/2 standard. All sound data are referred to the fancoils Aermec adheres to the EUROVENT Certification Programme. The relevant products are listed on the website, at 4 Aermec

Accessories Fan coil Hw Coil Auxiliary tray Pump kit Valve kit COLD only - COLD/HOT HOT only valve kit 3-way 2-way 3-way 2-way ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) FCXI20 BV122 BC8 DSC4 VCF41

5 Accessories Fan coil Hw Coil Auxiliary tray Pump kit Valve kit COLD only - COLD/HOT HOT only valve kit 3-way 2-way 3-way 2-way ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) FCXI20 BV122 BC8 DSC4 VCF41 VCF4124 VCF1X4L VCF1X4R VCFD1 VCFD124 VCF44 VCF4424 FCXI24 - BC8 DSC4 VCF1X4L VCF1X4R FCXI30 BV132 BC8 DSC4 VCF41 VCF4124 VCF1X4L VCF1X4R VCFD1 VCFD124 VCF44 VCF4424 FCXI34 - BC8 DSC4 VCF1X4L VCF1X4R FCXI40 BV142 BC8 DSC4 VCF2X4L VCF2X4R VCF44 VCF4424 FCXI44 - BC8 DSC4 VCF43 VCF4324 VCF2X4L VCF2X4R FCXI50 BV142 BC8 DSC4 VCF2X4L VCF2X4R VCF44 VCF4424 FCXI54 - BC8 DSC4 VCF2X4L VCF2X4R FCXI80 BV162 BC9 DSC4 VCF43 VCF4324 VCF3X4L VCF3X4R VCFD3 VCFD324 VCF45 VCF4524 FCXI84 - BC9 DSC4 VCF43 VCF4324 VCF3X4L VCF3X4R VCFD3 VCFD324 VED030I BV030 BC8 DSC4 VCF43 VCF4324 VCF45 VCF4524 VED040I - BC8 DSC4 VCF43 VCF4324 VED130I BV130 BC8 DSC4 VCF43 VCF4324 VCF45 VCF4524 VED140I - BC8 DSC4 VCF43 VCF4324 VEDI230I BV230 BC8 DSC4 VCF43 VCF4324 VCF45 VCF4524 VED240I - BC8 DSC4 VCF43 VCF4324 VED330I BV162 BC8 DSC4 VCF43 VCF4324 VCF45 VCF4524 VED340I - BC8 DSC4 VCF43 VCF4324 VED530I VCF45C VCF25C - VED532I - VCF45C VCF25C VCF45H VCF25H VED540I VCF45C VCF25C - VED541I - VCF45C VCF25C VCF45H VCF25H VED730I VCF47C VCF25C - VED732I - VCF47C VCF25C VCF47H VCF25H VED740I VCF47C VCF25C - VED741I - VCF47C VCF25C VCF47H VCF25H ( 1 ) Additional battery - 1 row (hot) ( 2 ) Auxiliary condensate tray BC8 -BC9 is not compatible with DSC4 ( 3 ) Condensate removal pump kit ( 4 ) Three-way valve kits for battery, 3 or 4 rows ( 5 ) Two-way valve kits for battery, 3 or 4 rows ( 6 ) Three-way valve kit for battery, hot only ( 7 ) Two-way valve kit for battery, hot only CLIMA-ZONE is equipped with the following features as standard: 1 master remote control for a single tap, and one slave remote for each of the other taps Conical reduction 200/160 RCCP2016 (1 for tap) Support Brackets (supplied with plenum for the installation of FCXI fan coils, size 20 to 54) Aermec 5

6 Technical drawing G D F E Dimensions (in) and weight (lbs) Fan coil Plenum A B C D E F G lbs FCXI20/24 PMZ FCXI30/ FCXI40/ FCXI50/ FCXI80/ VED030i PMZ VED040I PMZ VED130I VED VED230I VED240I VED330I VED340I VED530I PMZ504 PMZ VED540I PMZ504 PMZ VED730I PMZ705 PMZ VED740I PMZ705 PMZ For further information, please refer to the selection programme or the technical documentation available at 6 Aermec

7 OMNIA

8 Aermec S.p.A. Via Roma, Bevilacqua (VR) - Italy Tel Fax sales@aermec.com All specifications are subject to change without prior notice. Although every effort has been made to ensure accuracy, Aermec does not assume responsibility or liability for eventual errors or omissions. Cod. DCLIMAZONEUY_00

CLIMA-ZONE TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS. Ductable EC system, by constant pressure zones

CLIMA-ZONE TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS. Ductable EC system, by constant pressure zones TERMINAL UNIT FOR HEATING AND COOLING MULTIPLE ROOMS Ductable EC system, by constant pressure zones Description Advantages CLIMA-ZONE is a terminal water-cooled air-conditioning unit equipped with: a EUROVENT-certified