+3.3Vin to +2.5V Output at 3.0A In Hermetic Packages
|
|
|
- Geoffrey McKinney
- 5 years ago
- Views:
Transcription
1 1 M Rad (Si), ULTRA LOW DROPOUT POSITIVE LINEAR REGULATOR +3.3Vin to +2.5V Output at 3.0A In Hermetic Packages FEATURES Total dose and low dose capability to 1M Rad (Si) allows use in space applications Ultra low dropout voltage of 3A out significantly reduces power consumption Low noise, higher efficiency Remote shutdown permits power sequencing to be easily implemented Hermetic MO-078AA (TO-258) and 8-lead flat pack ensure higher reliability K-level screened DESCRIPTION The OMR9601 is a radiation hardened, ultra low dropout linear regulator designed specifically for space applications. This product has been characterized to a total ionizing dose of 1M Rad (Si) per MIL-STD-883, Method 1019, Condition A at both high and low dose rates under biased and unbiased conditions to account for ELDRE effects in bipolar devices. The ultra low dropout voltage of 3A makes the part particularly useful for applications requiring low noise and higher efficiency. MAXIMUM RATINGS (T J =25 C unless otherwise specified) Parameter Symbol Value Unit Output Current Io 3.5 A Input Voltage Vin +7.0 V Lead Temperature Tl 300 C Power Dissipation, T C =25 C P TOT 19 W Thermal Resistance, Junction to Case MO-078AA RthJC 6.5 C/W Thermal Resistance, Junction to Case 8 Lead Flat Pack RthJC 6.5 C/W Operating Temperature Tj C Storage Temperature Range Ts C Vin Vout Drive Shutdown Gnd Ground
2 ELECTRICAL CHARACTERISTICS (Ta=25 C unless otherwise specified) Parameter Conditions Symbol Min. Typ Max Unit. Output Voltage Vin= 3.3V, Io= 3.0A Vout V Input Voltage Range- Io= 3.0A V Operating Line Regulation 3.13 Vin 3.46, Io= 3.0A 2.9 Vin 3.8, Io= 50mA Vline mv mv Load Regulation Vin= 3.3V Vload mv 50ma Iout 3.0A Io= 3.0A. Vout= 2.5V Vdrop 0.4 V Dropout Voltage Overcurrent Latch Up Vin= 3.3V Ilatch 3.0 A Ripple Rejection F= 120 Hz., Iout = 50mA 65 db Shutdown Source Current Vshdn= 5V Ishdn 200 ua Shutdown Pin Threshold Isource= 200uA Vshdn V Output Voltage at Vin= 3.3V, Io= 50mA, Vout V Shutdown Shdn= +5.0V (shdn) ELECTRICAL CHARACTERISTICS (Ta= -55 to +125 C) Parameter Conditions Symbol Min. Typ. Max Unit Output Voltage Vin= 3.3V, Io= 3.0A Vout V Input Voltage Range- Io= 3.0A V Operating Line Regulation 3.13 Vin 3.46, Io= 3.0A 2.9 Vin 3.8, Io= 50mA Vline mv mv Load Regulation Vin= 3.3V Vload mv 50ma Iout 3.0A Dropout Voltage Io= 3.0A. Vout= 2.5V Vdrop 0.4 V Overcurrent Latch Up Vin= 3.3V Ilatch 3.0 A Ripple Rejection F= 120 Hz., Iout = 50mA 65 db Shutdown Source Current Vshdn= 5V Ishdn 200 ua Shutdown Pin Threshold Isource= 200uA Vshdn V Output Voltage at Shutdown Vin= 3.3V, Io= 50mA, Vout V Shdn= +5.0V (shdn)
3 Post Radiation Characteristics Characteristics (90 Rads(Si)/Sec) Typical Voltage Output (Post 1000hr Life Test) Vout (V) (Pre 1000 hr Life Test) Vin = 3.3vdc Iload = 10 ma Typical Bias Current Vin = 3.3Vdc Iload = 10 ma Ibias (ma) (Pre 1000 hr Life Test) (Post 1000hr Life Test) -1.00
4 Post Radiation Characteristics Characteristics (90 Rads (Si)/Sec) Typical Load Regulation vdc vdc Iload = 3.0A Load Reg (mv) (Post 1000hr Life Test) (Pre 1000 hr Life Test) Typical Line Regulation (Post 1000hr Life Test) Line Reg (mv) (Pre 1000 hr Life Test) Post Radiation Characteristics 3.135vdc vdc Iload = 3.0A
5 Low Dose Rate Characteristics (0.1 Rads (Si)/Sec) Typical Voltage Output Vout (V) Low Dose Rate 0.1 rad(si)/sec Vin = 3.3vdc Iload = 10 ma OMR9601 Ripple Rejection vs. Frequency A 1.5A.75A.50A (db) ,000 10, ,000 1,000,000 Frequency (Hz)
6 Application Schematic Vin Vout Vin Vout 100uF 16V Tantalum OMR9601 SHDN GND 1.0uF Ceramic 220uF 6.3V Tantalum X7R Ground In order to maintain regulation and stability specified additional input and output bulk capacitors are recommended. Capacitors recommended above should be low ESR tantalums with tolerances of ± 20% max. Internal to the product are a 4.7uF input capacitor and a 4.7uF output capacitor in parallel with a 0.33uF ceramic capacitor. Shutdown: The regulator can be shutdown by applying a voltage > 1.6V to pin 4. The regulator will restart when the SHDN pin is pulled below the shutdown threshold of 1.0V. If remote shutdown is not required, pin 4 should be connected to GND to insure a safe off state.
7 Mechanical Outline MO-78AA Base: GLIDCOP Pins: Copper core, Alloy 52 Seals: Glass Pin Connections Terminal Description Base 1 Vin 2 GND 3 Vout 4 Shutdown 5 No Connection Mechanical Outline 8 Lead Flat Pack Base: C.R.S. Pins: #52 Alloy, Copper Cored Seals: Glass 9013 or Equiv. Finish: Microinches Electrole Nickel Over Microinches Elect Nickel. Pin Connections Terminal Description 1, 2 GND 3 Shutdown 4 No Connection 5,6 Vout 7,8 Vin
8 Ordering Guide Omnirel Part Number Package Description Screening OMR9601SCP MO-078AA 5 - Lead 100% Final Electrical OMR9601SCK MO-078AA 5 - Lead Class K per MIL-PRF OMR9601SFP 8 -Lead Flat Pack 100% Final Electrical OMR9601SFK 8 -Lead Flat Pack Class K per MIL-PRF Part Number Nomenclature OM R 9601 X X X Omnirel Radiation Device S=Isolated Package Screening Hardened/Tolerant N=Non-Isolated MIL-PRF Screening Requirements TEST/INSPECTION SCREENING MIL-STD-883 Class K Method (Space Level) Pre Seal Burn-In Optional 1030 Nondestructive Bond Pull 100% 2023 Internal Visual 100% 2017 Temperature Cycle 100% 1010 Constant Acceleration 100% 2001 Mechanical Shock 100% 2002 PIND 100% 2020 Pre Burn-In Electrical 100% Burn-In 100% 1015 Final Electrical 100% Seal 100% 1014 Radiographic 100% 2012 External Visual 100% 2009
Ultra Low Dropout Positive Adjustable Linear Regulator Hermetic Package + 3.3Vin at 3.0A
PD-94469A Ultra Low Dropout Positive OM8504SC Adjustable Linear Regulator OM8504SF Hermetic Package + 3.3Vin at 3.0A Product Summary Part Number Dropout IO Vin Package OM8504SC 0.4 V 3.0A 3.3V MO-078AA
SA278RXX 2A LDO VOLTAGE REGULATOR. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Page 1 of 16 DESCRIPTION
2A LDO VOLTAGE REGULATOR DESCRIPTION The is a positive low voltage dropout regulator, and voltage dropout is below 0.5V at 2A. The provides two versions: fixed and adjustable versions. The is available
IL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
TO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
Features. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed
Description Features The AMS7 is a series of low dropout voltage regulators which can provide up to A of output Low Dropout Voltage Load regulation:0.5% Max current. The AMS7 is available in six fixed
AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator
1A Adjustable / Fixed Low Dropout Linear Regulator Description The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in six fixed voltage, 1.2,
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA Description The IL1117C is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117C is available
DUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS
MILPRF8 CERTIFIED M.S.KENNEDY CORP. 707 Dey Road Liverpool, N.Y. 088 DUAL POSITIVE/NEGATIVE, AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS 000 SERIES () 706 FEATURES: Dual Low Dropout Voltage Internal Short
KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short
4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:
4707 DEY ROAD LIVERPOOL, NY 13088 PHONE: (315) 701-6751 FAX: (315) 701-6752 M.S. KENNEDY CORPORATION MSK Web Site: http://www.mskennedy.com/ Voltage Regulators By Brent Erwin, MS Kennedy Corp.; Revised
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Advanced Power Electronics Corp.
300mA Low Dropout Linear Regulator with Shutdown Description The is a low dropout, positive linear regu lator with very low quiescent current. The can supply 300mA output current with low dropout voltage
DVFL2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVFL series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
WATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO22 Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR
Description The is a positive low dropout regulator and is available in an adjustable version and fixed output voltage from 1.5V to 5.0V. All internal circuitry is designed to operate down to 800mV input
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
1.0A Low Dropout Positive Voltage Regulator
1.A Low Dropout Positive Voltage Regulator DESCRIPTION The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in four fixed voltage, 1.2V,1.8V,
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
Low Power, Low Dropout, 250mA, RF - Linear Regulators
Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
PIN DESCRIPTION. Enable (Input) IN GND OUT FLG ADJ LM39300T-X.X LM39300-X.X
FEATURES 3A minimum guaranteed output current 500mV typical dropout at 3A Ideal for 3.0V to 2.5V conversion Ideal for 2.5V to 1.8V or 1.5V conversion 1% initial accuracy Low ground current Current limiting
3-TERMINAL ADJUSTABLE REGULATOR LM317L
3-TERMINAL ADJUSTABLE REGULATOR DESCRIPTION Outline Drawing The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
5A LOW DROPOUT POSITIVE REGULATOR
5A LOW DROPOUT POSITIVE REGULATOR Features Output Current : 5A Maximum Input Voltage : 12V Adjustable Output Voltage or Fixed 1.8V, 3.3V, 5.0V Current Limiting and Thermal Protection Standard 3Pin Power
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
S24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
Asia-Pacific Europe, Middle East North America Bel Power Solutions, Inc. BCD.
The SemiQ Family of DC-DC converters provides a high efficiency single output in a size that is only 6% of industry-standard quarter-bricks, while preserving the same pinout and functionality. In high
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Description. Features. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//1/9/1) A/.V, V,.1V, 9V, 1V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
NOT RECOMMENDED FOR NEW DESIGNS
olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 C to + C operation 19 to DC input 50 V for 50 ms transient protection Fully isolated Fixed frequency Remote sense on single models Inhibit/sync
SQ24 Series DC-DC Converter Data Sheet VDC Input; Standard Outputs from 1-12 VDC
The SemiQ Family of dc-dc converters from provides a high efficiency single output in a size that is only 6% of industry-standard quarter-bricks, while preserving the same pinout and functionality. In
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
EB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
DEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
XA4217. Preset 8.4V Charge Voltage with 1% Accuracy
High Accuracy Linear Li-Lon Battery Charger Features Preset 8.4V Charge Voltage with 1% Accuracy Input Voltage:9-10V DC Pre-Charging, the Charge Current is Programmable Charge Current Up to 1A adjustable
North America Asia-Pacific Europe, Middle East
Bel Power Solutions point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The YMS nonisolated dc-dc converters deliver up to A of output
HP420X. 5A, High Efficiency POL Module GENERAL DESCRIPTION: FEATURES: APPLICATIONS: TYPICAL APPLICATION CIRCUIT & PACKAGE SIZE:
FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance 94% Peak Efficiency Enable Function
Features. Applications
The new SemiQ Family of DC/DC converters from di/dt provides a high efficiency single output in a size that is only 6% of industry-standard quarter bricks, while preserving the same pinout and functionality.
YM12S05 DC-DC Converter Data Sheet Vdc Input; Vdc 5A
The Products: Y-Series Applications Intermediate Bus Architectures Distributed Power Architectures Data communications Telecommunications Servers, workstations Benefits High efficiency no heat sink required
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Telecommunications, Wireless, Servers, Workstations
The ASQ24 eighth-brick dc-dc converters are ideally suited for aerospace applications where high reliability, low profile, and low weight are critical. They are designed for reliable operation in harsh
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules 12Vdc input; 16Vdc to 34Vdc output; 65W Max Power Vin+ VIN VOUT PGOOD MODULE Vout+ Applications Industrial Equipment Control Boards Test Equipment
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Features. Description. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//).V, V, V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent protection,
EMI INPUT FILTER 28 VOLT INPUT
FEATURES 55 to +125 C operation 28 volt input Up to 2.7 amps throughput current Up to 55 db attenuation at 500 khz Up to 60 db attenuation at 1 MHz and 5 MHz Compliant to MIL-STD-461C, CE03 Compatible
Output Current. Output Unit. Feature Set i 6A A 033 V R TDK- Lambda Dallas Technical Center. 14 Amps 3.3V Single
Ordering information Product Identifier Platform Input Voltage Current Unit Range # of Feature Set i 6A 24 014 A 033 V 001 -R TDK- Lambda Dallas Technical Center Option Table Feature Set 33.0 x 22.9mm
The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
1A Ultra Low Dropout Voltage Regulator 1A Ultra Low Dropout Voltage Regulator General Description The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
HX6038 HX
HX1001 Advanced Linear Charge Management Controller Features Preset 8.4V Charge Voltage with 1% Accuracy Input Voltage: 9V-16V Pre-Charging, the Charge Current is Programmable Charge Current Up to 1A adjustable
Delphi Series IPM, Non-Isolated, Integrated
FEATURES High efficiency: % @ Vin, V/A out Small size and low profile:.x.x.mm (. x. x. ) Output voltage adjustment:.v~v Monotonic startup into normal and pre-biased loads Input UVLO, output OCP Remote
NCS12 Series Isolated 12W 4:1 Input Single & Dual Output DC/DC Converters
NCS1 Series Isolated 1W :1 Input Single & Dual Output DC/DC Converters FEATURES UL 95 recognition pending :1 Wide range voltage input Operating temperature range - C to 5 C Typical load regulation from.5%
HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V-16V End - Charge - Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
PL10S-12 Non Isolated DC/DC Converters Long Form Datasheet
PL10S12 Non Isolated DC/DC Converters Features Synchrono Rectification NonIsolated Fixed Frequency Nominal Input Voltage Range from (512V) Output Voltage Adjtable with the Trim Function (0.9 to 5V) Current
NCS6 Series Isolated 6W 4:1 Input Single & Dual Output DC/DC Converters
FEATURES RoHS compliant : Wide range voltage input Operating temperature range C to 8 C Typical load regulation from.%.kvdc Isolation Typical effi ciency to 8% V & 8V Nominal input Power density.9w/cm
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
APPLICATIONS: AVAILABLE OPTIONS
PRODUCT OVERVIEW The HB series offers up to 350 watts of output power in standard Half-Brick package. This series features high efficiency up to 92%, high power density and 1500 Volts of DC isolation.
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
LW SERIES 5W WIDE INPUT RANGE
LW SERIES 5W WIDE INPUT RANGE FEATURES 5W DIL PACKAGE INDUSTRY STANDARD PACKAGE NO EXTERNAL COMPONENTS REQUIRED 4.5-9,9-18V,18-36V,36-72V,9-27V,18-54V, 9-36V,18V-72V WIDE INPUTRANGE 100% BURN-IN HIGH EFFICIENCY
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Package: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF
FEATURES Programmable Charge Current Up to 8mA No MOSFET, Sense Resistor or Blocking Diode Required Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging Thermal Regulation
3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
FEATURES Output Current of 3A Fast Transient Response 0.04% Line Regulation 0.2% Load Regulation Internal Thermal and Current Limiting Adjustable or Fixed Output oltage(1.5, 1.8, 2.5, 3.3, 5.0) Surface
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
Delphi Series V48SH, 1/16 th Brick 100W DC/DC Power Modules: 48V in, 1.8V, 30A out
Delphi Series V48SH, 1/16 th Brick 1W DC/DC Power Modules: 48V in, 1.8V, 3A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a
NON-ISOLATED DC/DC CONVERTERS
NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS S7AH-02C / V7AH-02C Modules Nonisolated Compact, low profile surface mount package Fixed frequency* High efficiency means less power dissipation
AT1084 5A Low Dropout Positive Voltage Regulator
FEATURES DESCRIPTION Three-Terminal Adjustable or Fixed Output Output Current of 5A Low Dropout 1.3V at 5A Output Current Line Regulation: 0.04% Load Regulation: 0.2% Fast Transient Response OCP & OTP
CE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:
Standalone Linear LiFePO battery charger with Thermal Regulation Series INTRODUCTION: The is a complete constantcurrent constantvoltage linear charger for single cell LiFePO batteries. It s SOT package
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
Delphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out
Delphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
Delphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A
FEATURES High efficiency: 94% @ 12Vin, V/3A out Voltage and resistor-based trim No minimum load required Output voltage programmable from.9vdc to.vdc via external resistors Fixed frequency operation Input
LP2992 Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors
Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors General Description The LP2992 is a 250 ma, fixed-output voltage
3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor
3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor DESCRIPTION ETA9740 is a switching Li-Ion battery charger capable of delivering up to 3A of charging current to the battery
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
1A Linear Li-Ion Battery Charger in SOP8/MSOP8
1A Linear Li-Ion Battery Charger in SOP8/MSOP8 FP8102 General Description The FP8102 is a standalone linear Li-ion battery charger with exposed pad SOP8/MSOP8 package. With few external components, FP8102
SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications
Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver
SELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
FME EMI Input Filters
FME0- EMI Input Filters Features Attenuation to 0 db at 00 khz Operating temperature - to + C Nominal 0 V input, 0 to 00 V operation Transient rating to 00 V for 0 ms Up to. A throughput current Compliant
1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
SELECTION GUIDE. Input Voltage (V) Order code B0505XS-2W B0505XD-2W B0509XS-2W
(S)D-2W Isolated 2W Single Output DC/DC Converters SELECTION GUIDE Order code Input Voltage (V) Output Voltage (V) Output Current (MA) Input Current (Rated Load) (MA) Efficiency (%) Isolation Capacitance
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
DT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
SELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
Not for New Design 10 WATT WD DUAL LOW INPUT SERIES DC/DC CONVERTERS. Features
Features Universal 9 to 36 Volt Input Range Up to 10 Watts of PCB Mounted Power Efficiencies to > 80% Optional On/Off Control Pin Fully isolated, Filtered Design Low Noise Outputs Very Low I/O Capacitance,
Volant NEA/NEF010 Series
Features: Small size, minimal footprint/low profile 10A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
High Efficiency POL Module
High Efficiency POL Module MPX24AD05-TU FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
SP6644/6645 Evaluation Board Manual
SP6644/6645 Evaluation Board Manual Easy Evaluation for the SP6644/6645 Single or Dual Cell Alkaline to 3.3V Output Provides up to 150mA output current for 2-Cell Input High Efficiency: 92% µsoic Package
TA78DL05S,TA78DL06S,TA78DL08S,TA78DL09S, TA78DL10S,TA78DL12S,TA78DL15S
TOSHIBA Bipolar Linear Integrated Silicon Monolithic TA78DL05,06,08,09,10,12,15S TA78DL05S,TA78DL06S,TA78DL08S,TA78DL09S, TA78DL10S,TA78DL12S,TA78DL15S 5, 6, 8, 9, 10, 12, 15 Three-Terminal Low Dropout
AMS Amp LOW DROPOUT VOLTAGE REGULATOR. General Description. Applications. Typical Application V CONTROL V OUT V POWER +
5 Amp LOW DROPOUT OLTAGE REGULATOR General Description The AMS1505 series of adjustable and fixed low dropout voltage regulators are designed to provide 5A output current to power the new generation of
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High