Mix Proof Valve Key W SERIES MIX PROOF VALVES

Size: px

Start display at page:

Download "Mix Proof Valve Key W SERIES MIX PROOF VALVES"

Meryl Miller
5 years ago
Views:

Mix Proof Valve Key W SERIES MIX PROOF VALVES The Valve Key is designed to provide our customers with a clear and concise description of the valve required.

Example: Mix Proof valve with an E one piece body, buttweld ports, size, seat lifting actuator, () proximity switches, () yoke proximity switch, and () solenoids, solenoid

1 Mix Proof Valve Key W SERIES MIX PROOF VALVES The Valve Key is designed to provide our customers with a clear and concise description of the valve required. The key number will always contain fields defining all areas of the valve s specification. Example: Mix Proof valve with an E one piece body, buttweld ports, size, seat lifting actuator, () proximity switches, () yoke proximity switch, and () solenoids, solenoid condition, 0 Pin Turck connector, Tri Ring seats, Fluoroelastomer, Ra Finish, and no options. () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 Body Style Port Sizes Switches/ Solenoids Control Module Connections Elastomers Options Valve Series Ports Actuator Solenoid Condition Seat Finish

2 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 ()Valve Series W7 W7RS W7RS Tank Outlet W7 W75RS S Standard Mix Proof Valve Minimum Spill Mix Proof Minimum Spill Mix Proof Divert Mix Proof PMO Mix Proof Sentinel IV Mix Proof PMO Mix Proof with Seatlifting W7 W7RS W7RS Tank Outlet Valve W7 W75RS PMO S

3 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 ()Body Configuration A B B B C E Two Piece Clamped Bodies* Tank Outlet Bodies (W7RS Only)* CS TS TD CD T T W7 - DIVERT Three Piece Clamped Bodies* TTT CTT TCT TCC CCC CTC TTC CCT *Clamped bodies allow ports to be rotated in any direction (Not Available for W75 series valves)

4 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 ()Ports W Butt Weld S S-Line I I-Line (female - 5I) F Flange (ANSI B6.5, 50# RF) Q Q-Line D DIN Thread For mixed connection types, specify in order of port # shown in body configuration see page. ()Ports Size(s) Example W7-TS-SW TS Tube Size OD: IPS Sch 5s (Not available on W75): 5 -/ 0V 0 0V 5 -/ 0V 0 60V For mixed sized bodies indicate upper ports first. Mixed body sizes not available on W75 series PMO valves. Example: -/ Upper by Lower is 50. Contact Factory to verify availability of mixed body sizes prior to placing an order. (5)Actuator SL Seat Lifting NSL Non Seat Lifting Standard with quick exhaust valve on lower seat lift air connection Not available on W75 series models

5 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 (6) Switches/Solenoids DESCRIPTION N O NO ENOIDS WITH () 0V AC WITH () 0V AC WITH () 0V AC WITH () V DC WITH () V DC WITH () V DC No Switches No Switches, Control top stem Set & Forget VDC Only Prox Switch () lower Prox Switch () upper Prox Switch () VDC/0 VAC Microswitch () lower Microswitch () upper Microswitch () VDC/0 VAC Prox Switch () lower Prox Switch () upper Prox Switch () Intrinsically Safe 5-5VDC/0 VAC ASi-Card & Set & Forget AS-i Card & Prox Switch () lower AS-i Card & Prox Switch () upper AS-i Card & Prox Switch () VDC Only DeviceNet Card & Set & Forget DeviceNet Card & Prox Switch () lower DeviceNet Card & Prox Switch () upper DeviceNet Card & Prox Switch () VDC (requires PNP switches) Prox Switch () AS-I Card & () Prox Switches VDC only DeviceNet Card & () Prox Switches VDC only Where proximity switches are indicated, these are externally mounted on top of actuator. (No Control Module) Indicates PMO control top options, the rd proximity switch is yoke mounted. Requires amplifier (not included, provided by others) When one proximity switch or microswitch is supplied, default is lower position to verify properly closed valve. Specify on order. Consult factory for special control module requirements. (7) Solenoid Condition VALVE DESCRIPTION* OPTION NUMBER W7, W7 W7RS W75RS, No Option 00 Mix Proof - No Solenoid 0 Mix Proof - Solenoid Mix Proof - Solenoids Mix Proof - Solenoids Mix Proof Radial Seal (RS) - No Solenoid 0 Mix Proof Radial Seal (RS) - Solenoid Mix Proof Radial Seal (RS) - Solenoid Mix Proof Radial Seal (RS) - Solenoid PMO - No Solenoid 0 PMO - Solenoid PMO - Solenoid PMO - Solenoid Note: For Mix Proof Valves, Solenoid = Valve Open, Solenoid = Upper Seat Lift, Solenoid = Lower Seat Lift 5

6 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 (8) Control Module Connections DESCRIPTION OPTION NUMBER No Control Module 00 S/O Cord, Strain Relief (Std) 0 Pin Turck Eurofast (Std for AS-i or up to Switches only - no solenoid; AC/DC) 5 Pin Turck Eurofast (Std for Device Net and Set & Forget Switch only; AC/DC) 5 6 Pin Turck Eurofast ( or Switches and solenoid; switches and no solenoid; DC only) 6 0 Pin Turck Eurofast (up to switches and up to solenoids; DC only) Pin Turck Eurofast (DC only) 8 Pin Turck Eurofast (Up to Switches and up to solenoids; DC only) 8 5 Pin Turck Minifast ( or Switches, no solenoid; AC/DC) 5 6 Pin Turck Minifast ( or Switches and up to solenoids; AC/DC) 6 7 Pin Turck Minifast ( or Switches and up to solenoids; AC/DC) 7 8 Pin Turck Minifast (up to switches and up to solenoids; AC/DC) 8 9 Pin Turck Minifast (AC/DC) 9 0 Pin Turck Minifast (up to switches and up to solenoids; AC/DC) Includes connector on control module only. Mating connector and cable sold separately, by others. *Turck is WCB Standard for pin connectors. (9) Seat TR Tri Ring (W7, W7RS, W7, W75RS,, optional on S) TF EP PTFE (S std) EPDM (S optional) TR (W7/W7/S) TR (W7RS/W75RS/) TF/EP (S) 6

7 () () () () (5) (6) (7) (8) (9) (0) () () E W 0 SL 807 TR V 00 (0) Elastomer () Finish (Specifies materials for all gaskets, O-rings, & Tri Ring seals) Standard Finish (Machined <Ra) ID (.8µm) E EPDM 5 5Ra Mechanical Polish ID (.µm) V Fluoroelastomer EP Ra Machined Finish and Electropolish ID X Optional Elastomer (specify) 5EP 5Ra Mechanical Polish and Electropolish ID Contact Factory for special requirements. Electropolish (EP) is in addition to the mechanical polish finish. () Options DESCRIPTION OPTION NUMBER No Options 00 Mill Test Reports 06 Stainless Steel Tags 08 Quick Dump Valve for main air connection 09 Wiping Stem Seals (upper and lower) 0 External Flush (liquid vent cavity only) External Flush (liquid vent cavity and lower stem) Upper Stem Balancer 5 External Flush (steam vent cavity, upper & lower stem*) Multiple options available (Example: Stainless Steel Tags & External Liquid Flush: 08,) *Steam continually accesses vent cavity when valve is open and closed. NOTE: Wiping stem seals standard on W75 series PMO Mix Proof Valves. External Flush External Flush External Flush Wiping Stem Seal Liquid Vent Cavity Steam Vent Cavity Lower Stem (Lower Stem Shown) Upper Stem (Liquid or Steam) 7

8 Mix Proof Valve Key W SERIES MIX PROOF VALVES SPX FLOW TECHNOLOGY 6 Sugar Creek Road Delavan, WI 55 P: (6) or (800) F: (6) or (800) 5-50 E: wcb@spx.com SPX reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information visit The green > is a trademark of SPX Corporation, Inc. ISSUED 07/05 DS-05 COPYRIGHT 05 SPX Corporation

Mix Proof Valve Key. Body Style. Switches/ Solenoids. Control Module Connections. Port Sizes. Elastomers. Options. Solenoid Condition.

Mix Proof Valve Key. Body Style. Switches/ Solenoids. Control Module Connections. Port Sizes. Elastomers. Options. Solenoid Condition. The Valve Key is designed to provide our customers with a clear and concise description of the valve required. The key number will always contain fields defining all areas of the valve s specification.