Intertek Level 4 RTL (ASTA Recognized Laboratory Scheme)
|
|
|
- Oswin Williams
- 5 years ago
- Views:
Transcription
1 Page 1 of 6 Site(s) applicable to the recognition: Central Power Research Institute Prof Sir C.V. Raman Road P.B. No Sadashivanagar Sub-P.O. Bangalore India Central Power Research Institute Switchgear Testing & Development Station Govindpura Bhopal India Scope of recognition (generic products): All Low Voltage Switchgear, Circuit-Breakers, Switches, Disconnectors, Contactors, Fuse Combinations, Fuses, Fuse-Links, Switchgear and Controlgear Assemblies, Busbar Trunking, Motor Starters, Control Circuit Devices, Switching Elements, Transformers and Reactors, Low Voltage, Medium Voltage and High Voltage Power Cables, Cable Joints and Terminations, High Voltage Power Transformers, Alternating Circuit-breakers and A.C. Metal Enclosed Switchgear and Controlgear. Conditions applicable to the recognition: The recognition of the Laboratory is subject to the NABL Accreditation No. T-0010 and T-0011 remaining valid for the above product types.
2 Page 2 of 6 CENTRAL POWER RESEARCH INSTITUTE, BANGALORE (SHORT-CIRCUIT LABORATORY) Circuit breakers IEC (: 2011 & : 2013) Switches IEC (: 2011 & : 2012) Disconnectors Switch Disconnector & fuse combination units Contactors & Motor Starters IEC (: 2011 & Part 4-1: 2012) IEC : 2011 Control circuit devices & switching elements IEC (: 2011 & Part 5-1: 2009) Low voltage switchgear & control gear assemblies General Rules IEC : 2011 Power Switchgear & Controlgear Assemblies Distribution Boards Intended To Be Operated By Ordinary Persons (DBO) Particular Requirements For Assemblies For Construction Sites (Acs) Assemblies For Power Distribution In Public Networks IEC : 2011 IEC : 2012 IEC : 2012 IEC : 2010 Busbar Trunking Systems (Busways) IEC : 2012 except clauses & Electrical Accessories-circuit breakers for over current IEC : 2003 protection for household and similar installations IEC : 2003 Circuit breakers for equipment (CBE) IEC 60934: 2000 Residual current operated circuit breaker IEC 60755: 1983 IEC : 2012 IEC : 1990 IEC : 1990 IEC : 2013 IEC (1991) IEC (1991) Power transformers up to 1000 kva, 11kV Part 4 Part 5 General Temperature rise Insulation levels, dielectric tests and external clearances in air Guide to the lightning impulse and switching impulse testing Ability to withstand short circuit IEC : 2011 IEC : 2011 IEC : 2000 IEC : 2002 IEC : 2006
3 Page 3 of 6 CENTRAL POWER RESEARCH INSTITUTE, BANGALORE (CABLES LABORATORY DCCD) Instrument transformers : : General Requirements Additional Requirements For Current Transformers IEC : 2007 IEC : 2012 Power Cables & Cable accessories Power cables with Extruded Insulation and accessories for voltages 1 kv and 3 kv Power cables with Extruded Insulation and accessories for voltages from 6 kv up to 30 kv Part 4 Power cables with Extruded Insulation and accessories for voltages from 6 kv up to 30 kv Test Requirements on accessories for cables with rated voltages from 6 kv Power cables with Extruded Insulation and their accessories for rated voltages above 30 kv up to 150 kv Test Methods and Requirements Power cables with Extruded Insulation and their accessories for rated voltages above 150 kv up to 500 kv Test Methods and Requirements Paper Insulated Metal Sheathed Cables for rated Voltages up to18/30 kv Tests on cables and accessories IEC : 2009 IEC : 2005 IEC : 2010 IEC 60840: 2011 IEC 62067: 2011 IEC :1997 Am Partial discharge Measurement Instrument transformers- Current transformers (up to 132 kv) IEC : 2012 IEC : 2007 Metal Oxide surge Arrestors with out gaps for a.c Systems ( Up to 132 kv) IEC BS Specifications Cables with Extruded XLPE or EPR insulation for rated voltages from 3800/6600 V up to 19000/33000 V BS 6622: /1000 V and 1900/3300 V armoured electric Cables having PVC insulation 600/1000 V and 1900/3300 V armoured electric Cables having thermosetting insulation Test Methods and Requirements for accessories for use on distribution Cables of rated voltages 0.6/1.0 (1.2) kv Test Requirements on accessories for use on Power Cables of rated voltages from 3.6/6 (7.2) kv up to 20.8/36 (42) kv BS 6346: 2012 BS 5467: 2008 BS EN 50393: 2006 CENELEC HD S2-2006
4 Page 4 of 6 CENTRAL POWER RESEARCH INSTITUTE, STDS, BHOPAL Low voltage fuses Part 4 General requirements Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to I Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Examples of standardized systems of fuses A to F Supplementary requirements for fuse links for protection of semi conductor devices IEC : 2009 IEC : 2010 IEC : 2013 IEC : 2012 Low voltage switchgear & control gear Part-4-1 Part 4-2 Circuit breakers Switches, Dis-connectors, Switch dis-connectors & fuse combination units Contactors and motor starters-electromechanical contactors and motor starters Contactors and motor starters-ac semi conductor motor controllers and starters IEC : 2011 IEC : 2013 IEC : 2012 IEC : 2012 IEC : 2011 Electrical accessories-circuit breakers for over current protection for household and similar installations Circuit breakers for AC operation IEC : 2003
5 Page 5 of 6 CENTRAL POWER RESEARCH INSTITUTE, STDS, BHOPAL (CONTINUED) Low voltage switchgear and control gear assemblies Power Switchgear And Controlgear Assemblies Distribution Boards Intended To Be Operated By Ordinary Persons (DBO) Particular Requirements For Assemblies For Construction Sites (Acs) Assemblies For Power Distribution In Public Networks IEC : 2011 IEC : 2011 IEC : 2012 IEC : 2012 IEC : 2010 Busbar Trunking Systems (Busways) Residual current operated circuit breakers without integral Over-current protection for household and similar uses (RCCBs) -1 Applicability of the general rules to RCCBs functionally independent of line voltage -2 Applicability of the general rules to RCCBs functionally dependent on line voltage IEC : 2012 except clauses & IEC : 2012 IEC : 1990 IEC : 1990 Residual current operated circuit breakers with integral Over-current protection for household and similar uses (RCBOs) -1-2 Applicability of the general rules to RCBOs functionally independent of line voltage Applicability of the general rules to RCBOs functionally dependent on line voltage IEC : 2012 IEC : 1991 IEC : 1991
6 Page 6 of 6 CENTRAL POWER RESEARCH INSTITUTE, STDS, BHOPAL (CONTINUED) High voltage switchgear and control gear High voltage alternating current circuit breakers AC metal enclosed switchgear & control gear for rated voltages above 1 kv and up to and including 52 kv IEC : 2012 IEC : 2011 High voltage fuses Current limiting fuses Expulsion fuses IEC : 2009 IEC : 2008 Power transformers Part 4 Part 5 General Temperature rise Insulation levels, dielectric tests and external clearances in air Guide to the lightning impulse and switching impulse testing Ability to withstand short circuit IEC : 2011 IEC : 2011 IEC : 2000 IEC : 2002 IEC : 2006 Instrument transformers : : General Requirements Additional Requirements For Current Transformers IEC : 2007 IEC : 2012
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Item 1: Contents of the complete training & CV of the lecturer
Course DESIGN CONCEPTS + software SwitchgearDesign for SWITCHGEAR, SWITCHBOARDS, BUSDUCTS & SUBSTATIONS" Item 1: Contents of the complete training & CV of the lecturer Presented by Sergio Feitoza Costa
The University of New South Wales. School of Electrical Engineering and Telecommunications. Industrial and Commercial Power Systems Topic 2
The University of New South Wales School of Electrical Engineering and Telecommunications Industrial and Commercial Power Systems Topic 2 SWITCHBOARDS Overview Also called Switchgear and Controlgear Assembly
AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
PART B-07 TITLE: SERVICE CONNECTIONS SPECIFICTION NO: B-07 INCEPTION DATE: AFTER GAZETTING (WORKING DOCUMENT FOR A 3 YEAR PERIOD) AMENDMENTS / REVISIONS DATE PAGE PARAGRAPH DESCRIPTION ORIGINATOR APPROVED
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11068-09-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 10.07.2014 to 09.07.2019 Holder of certificate: Karlsruher
A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment
Appendix B A List of Standards Often Used for Designing Electrical Systems and for Specifying Equipment Note... erence in {} brackets supersede the original references. B.1 INTERNATIONAL ELECTRO-TECHNICAL
j Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
j Schedule of Accreditation Laboratory locations: Ridley Street lyth Northumberland NE24 3AG United Kingdom ORE Catapult Development Services Limited a subsidiary of Contact: Geoff Richardson Tel: +44
INTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
Energy Transmission & Distribution Services - Italy. SVEPPI laboratory...our services for your success. Answers for energy.
Energy Transmission & Distribution Services - Italy SVEPPI laboratory...our services for your success. Answers for energy. ...our services for your success ENERGY - T&D Services Experience teaches us that
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-05-11 to 2018-12-15 Holder of certificate: Institute
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
17065:2012 to provide product conformity certification 1, Place des Alpes CH-1211 Geneva Switzerland Contact: Patricia Lumbreras Tel: +(511) 221 1159 E-Mail: patricia.lumbreras@sgs.com Locations where
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
Independent Testing Laboratory for High Voltage Equipment
T E S T I N G L A B O R A T O R Y Independent Testing Laboratory for High Voltage Equipment 1 CHALLENGING ENVIRONMENT The primary concern for utilities is to ensure grid reliability, efficiency, and security.
SWITCHBOARDS (LV and MV)
ELEC9713 Industrial and Commercial Power Systems SWITCHBOARDS (LV and MV) 1. Introduction Depending on the size of the building or factory site and whether the supply is high voltage or low voltage, there
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60470 Second edition 1999-10 High-voltage alternating current contactors and contactor-based motor-starters Contacteurs pour courants alternatifs haute tension et démarreurs
HMI, APRIL, Test Laboratories in Ratingen
HMI, 24.-28. APRIL, 2017 Test Laboratories in Ratingen Test Laboratories Ratingen Overview Basic Features Flexible Independent Well experienced in testing of medium and low voltage equipment (testing since
SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks
power cable accessories
power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten
On-Site Guide (BS 7671:2008 Wiring Regulations, incorporating Amendment No 1:2011)
(BS 7671:2008 Wiring Regulations, incorporating Amendment No 1:2011) Author: IET Publications (edited by Mark Coles) Book details Author: IET Publications (edited by Mark Coles) Year: 2011 Format: Paperback,
NPS/003/010 - Technical Specification for 400V Assemblies (LVAC Boards) utilised in Major Substations
Version:- 3.0 Date of Issue:- Dec 2013 Page 1 of 13 NPS/003/010 - Technical Specification for 400V Assemblies (LVAC Boards) utilised in Major Substations 1. Purpose This document is the technical specification
GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T18487.1-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.99 T 35 GB/T 18487.1-2015 Replacing
e 2 ALPHA -2S Medium Voltage Double Busbar Switchgear K Catalogue EN
e 2 ALPHA -2S Medium Voltage Double Busbar Switchgear K-11.1.2 Catalogue EN We Create Ideas With Power! e 2 ALPHA-2S double busbar switchgear is designed for use in primary and secondary electric energy
NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links
Version:- 7.0 Date of Issue:- July 2017 Page 1 of 19 NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links 1. Purpose The purpose of this document is to detail
Metal Clad Switchgears
SNC Series Metal Clad Switchgears > up to 36 kv Rated Voltage > up to 2500 A Rated Current > up to 40 ka Rated Short Time Withstand Current > LSC-2B, PM, AFLR > In Confirmity with IEC 62271-1, 100, 102,
Documents and Addresses
Report No.: 05-035-MS/E Sheet: 2 Documents and Addresses Accreditation The Prüffeld der Schaltwerke, Berlin has been approved by the DATech (German accreditation body for technology) according to EN ISO/IEC
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,
SUBSTATION DESIGN TRAINING
2017 SUBSTATION DESIGN TRAINING ADVANCE ELECTRICAL DESIGN & ENGINEERING INSITUTE (Registered under MSME& An ISO 9001:2008 CERTIFIED) Training Centre: Advance Group of Institutions C-1, Second Floor Near
Pretest Module 29 High Voltage Unit 1
Pretest Module 29 High Voltage Unit 1 1. Is a person qualified to work on high-voltage installations when this module is completed? 2. What is the code definition of high-voltage? 3. What is the IEEE definition
The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory
Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition
AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR
AIR INSULATED METAL ENCLOSED SWITCHGEAR AND CONTROLGEAR ANGLER SWITCHING DEVICES CONTENTS 1. General 2. Switchgear Types - Switch Disconnector - Disconnector 3. Cubicle Types - Cubicle with Switch Disconnector
Technical Specification for 33 KV 200 AMPs,H.G,Fuse set.
Technical Specification for 33 KV 200 AMPs,H.G,Fuse set. 1. SCOPE:- This specification covers the manufacture, testing and supply of 33KV 200 Amps, H.G. Fuse sets 2. The 33 KV H.G. Fuses shall be suitable
3TM Vacuum Contactors
Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents
STANDARDS SOUTH AFRICA. Amendment No. 5 : May SANS :2006 (Ed 1.5) THE WIRING OF PREMISES PART 1: LOW-VOLTAGE INSTALLATIONS
STANDARDS SOUTH AFRICA Amendment No. 5 : May 2006 to SANS 10142-1:2006 (Ed 1.5) THE WIRING OF PREMISES PART 1: LOW-VOLTAGE INSTALLATIONS Approved in accordance with procedures of Standards South Africa.
The comprehensive portfolio of the testing laboratories at Schaltwerk Berlin siemens.com/energy/psw
Powerful, efficient, independent The comprehensive portfolio of the testing laboratories at Schaltwerk Berlin siemens.com/energy/psw Outstanding testing expertise and always up to date Benefit from decades
Nexans Network Solutions Div. Euromold
Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories
LIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016
No Description/ Specification Amendment 1 EDD 1 :2008 11/0.415 kv Distribution Transformer, Oil Filled - 2 ED 2 :1987 The Galvanization of Iron and Steel, Articles Other Than Steel Wire - 3 ED 3 :1979
High Voltage and Extra High Voltage Cables
High Voltage and Extra High Voltage Cables GUIDE TO THE SELECTION OF EHV AND HV CABLES EHV and HV cables are specially designed on the basis of the project data. To determine appropriate design of a high
NXPLUS C Single busbar. Maintenance-free for lifetime
NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage
Technical Guarantees For Electrical Materials & Equipments 1 Technical Guarantees No. IDT_1600 22/0.4 KV Low Losses, 3 phase, Indoor Distribution Transformer 1600 KVA Rating No Description Unit Requirements
Prüffeld der Schaltwerke
Report No.: 16-043-MS Sheet: 2 Notes 1. The testing station of the Siemens switchgear factory (Prüffeld der Schaltwerke),, Berlin, has been approved by the DAkkS (German accreditation body) for rendering
List of Mandatory Commercial Documents ITEM DESCRIPTION REQUIRED ITEM DRAWING DOCUMENTS NAME REQUIRED ITEM TEST DOCUMENTS NAME
Terms and Conditions : 1) Before proceed please confirm material documents and test documents are available with you. 2) Vendor Document Verification Registration Fee Rs.5000 + payment gateway charges,
017: 1998 CEB STANDARD RING MAIN UNIT CEYLON ELECTRICITY BOARD SRI LANKA
017: 1998 CEB STANDARD RING MAIN UNIT CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS PAGE 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable Standards 3 5. Basic Features 4 6. Quality
Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable
www.siemens.com/medium-voltage-switchgear Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Catalog HA 41.43 2012 Answers for infrastructure and cities. Neue Bilder
Air-insulated switchgear UniGear type ZS1
Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 1-7074 D 12-03-2003 - Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 2-7075 D 1 2-03-2003 - Rated voltage kv 12 17.5
CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka Up to 38 kv / 2000 A / 31.5 ka IEEE Standards
Medium Voltage Switchgear Primary Distribution CPG.1 Gas insulated, single busbar cubicle range Up to 27 kv / 2000 A / 31.5 ka General description Presentation Ormazabal s CPG System includes the CPG.1
Unified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) (Corr.1 June 2018) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements
Zinc Oxide Surge Arrester EXLIM R
Zinc Oxide Surge Arrester EXLIM R Protection of switchgear, transformers and other equipment in high systems against atmospheric and switching overs. For use when requirements of lightning intensity, energy
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
Distribution transformers Efficiency over life-cycle
Distribution transformers Efficiency over life-cycle ABB a global leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
Collection of standards in electronic format (PDF) 1. Copyright
Collection of standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance
Medium voltage switchgear type W 12. rated voltage 12 kv rated current 630 A
Medium voltage switchgear type W rated voltage kv rated current 0 A General The metal-encapsulated, air-insulated medium voltage switchgears, type W are for universal application. They range from compact
Medium Voltage. Joints & Terminations
57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured
Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable
Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear Totally Integrated Power SIMOSEC Catalog HA 41.43 Edition Sept. 2014 Answers for infrastructure and cities. Neue
a Nexans company Catalogue 2009
a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
Catalog HA Edition up to 24 kv, Air-Insulated, Extendable. Medium-Voltage Switchgear. siemens.com/simosec
Catalog HA 41.43 Edition 2018 Switchgear Type SIMOSEC, up to 24 kv, Air-Insulated, Extendable Medium-Voltage Switchgear siemens.com/simosec Application Typical uses R-HA41-135.tif R-HA40-112.tif R-HA41-115.tif
Bus bar Bushings up to 1.1kV and from 1.6kA to 4kA for Liquid Filled Transformers:
4 (Four) Pole Monoblock: Bus bar Bushings up to 1.1kV and from 1.6kA to 4kA for Liquid Filled Transformers: Designed and manufactured in accordance with EN 50336:2002 and BS 2562: 1979 1 Introduction:
MV TERMINATIONS. INDOOR SINGLE CORE TERMINATION - ELTI-1C for polymeric cables - Slip-on termination - Modular type APPLICATION STANDARDS
MEDIUM VOLTAGE MV TERMINATIONS INDOOR SINGLE CORE TERMINATION - ELTI-1C APPLICATION Utilisation indoor. in boxes and compact switchgears. in terminal boxes located outdoor and subject to condensation.
Guideline No.: E-07(201610) E-07 TRANSFORMERS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-07(201610) E-07 TRANSFORMERS Issued date: October 28,2016 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
Zinc-Oxide Surge Arrester TEXLIM Q-C
Zinc-Oxide Surge Arrester TEXLIM Q-C Protection of switchgear, transformers and other equipment in high systems against atmospheric and switching overs. in areas with very high lightning intensity where
Steve Summers Region Sales Manager
Steve Summers Region Sales Manager Institute For Animal Healthcare LV Switchgear Package Package Subs LV Switchboards PDU s LV sub Distribution MCC s MV Switchgear Established in 1972 manufacturing control
Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
PRE-AMBLE TO THE STANDARD SPECIFICATION FOR MEDIUM AND LOW VOLTAGE ELECTRICITY DISTRIBUTION WORKS
PART A-01 TITLE: INCEPTION DATE: PRE-AMBLE TO THE STANDARD SPECIFICATION FOR MEDIUM AND LOW VOLTAGE ELECTRICITY DISTRIBUTION WORKS After Gazetting (Working Document for a 3 year period) AMENDMENTS/REVISIONS
S.No. Tender Queries BRPL Reply 1 For 11KV(E) 3Cx300sqmm A2XWY High Ampacity cable conductor details specification not
S.No. Tender Queries BRPL Reply 1 For 11KV(E) 3Cx300sqmm A2XWY High Ampacity cable conductor details specification not clear.please provide Specification for High ampacity HT Cable with Trapezoidal wire
MOBILE SUBSTATION GUIDE
MOBILE SUBSTATION GUIDE Certificate Number FM35831 Mobile substations by their nature offer the flexibility and the opportunity to ensure a reliable energy supply. Mounted on a trailer, their compact and
Modular Substation Technical Data. Modular Substation. Technical Data TGOOD
Modular Substation Technical Data TGOOD 2017.2 1 Contents: Part 1: Common characteristics Part 2: HV Gas Insulated Switchgear (GIS) Technical Data Part 3: 110kV Neutral Point Complete Equipment for Service
High reliability against cyclic and peak current loads / age resistant due to high motor start up currents
HHM High Voltage Fuses Motor Circuit Protection DIN and British Standard SIBA Motor Rated Fuses are available in - German DIN Standard and - British Standard Design The large variety in body sizes / mounting
TECHNICAL SPECIFICATION FOR 11 KV CAPACITOR BANK
TECHNICAL SPECIFICATION FOR 11 KV CAPACITOR BANK MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE 1 OF 7 TECHNICAL SPECIFICATION FOR 11 KV.CAPACITOR BANK 1.0 SCOPE: This specification covers
Solid Dielectric Load Break Switch SPECIFICATION. 25kV, 630A, 4 WAYS, 4 WAYS SWITCHED PADMOUNTED VACUUM LOAD INTERRUPTER
Solid Dielectric Load Break Switch SPECIFICATION 25kV, 630A, 4 WAYS, 4 WAYS SWITCHED PADMOUNTED VACUUM LOAD INTERRUPTER MANUALLY OPERATED / REMOTELY OPERATED DEAD FRONT PADMOUNTED VACUUM LOAD INTERRUPTING
DRAFT: SOUTH AFRICAN NATIONAL STANDARD
ISBN xxx-x-xxx-xxxxx-x SANS 10142-1-2:201X Any reference to SABS xxxx is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) DRAFT: SOUTH AFRICAN NATIONAL STANDARD
FAQ S. Main Switchboard Design Criteria. ENGINEERED SOLUTIONS FOR ALL YOUR SWITCHBOARD NEEDS
FAQ S Main Switchboard Design Criteria h ENGINEERED SOLUTIONS FOR ALL YOUR SWITCHBOARD NEEDS www.electricalswitchboards.com.au Main switchboard Design criteria Q: What is the Australian standard for main
Sharda Electronics & Co. An ISO 9001:2015 Certified Company
Sharda Electronics & Co. An ISO 9001:2015 Certified Company Business Profile We have been witnessing to change all our life and change continues to happen all around us every moment. Change is happening
MEDIUM VOLTAGE SWITCHGEAR
MEDIUM VOLTAGE SWITCHGEAR MEDIUM VOLTAGE SWITCHGEAR Easun Reyrolle is a leader in the field of electrical power management and has more than 30 years of domain expertise in providing a wide spectrum of
Power distribution. General remarks
When developing the Rittal busbar systems and their components, Rittal drew on the latest state of the art and the currently valid standards and regulations. These applications are used by specialist companies
10/2015 CUBICLE AND METAL-CLAD MEDIUM VOLTAGE SWITCHGEARS WEGA 07 WEGA 12 WEGA 17 WEGA 24 WEGA 36
10/2015 CUBICLE AND METAL-CLAD MEDIUM VOLTAGE SWITCHGEARS WEGA 07 WEGA 12 WEGA 17 WEGA 24 WEGA 36 Gdańsk, October 2015 Improving the competitiveness of the company ELMOR through investments introducing
a Nexans company Medium voltage symmetrical separable connectors - Interface C -
a Nexans company Medium voltage symmetrical separable connectors - Interface C - Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised
CABLE SYSTEMS. Accessories and Systems for Medium and High-Voltage Cables up to 300 kv.
MV-CONNEX, HV-CONNEX, IXOSIL Terminations, IXOSIL MSA Slip-on Joint Boxes CABLE SYSTEMS Accessories and Systems for Medium and High-Voltage Cables up to 300 kv. Welcome to the CABLE SYSTEMS Centre of Competence.
List of Malaysian Standard (MS) for Cables. Prepared by MCMA SWO. Cable - Armoured. Cable - Armoured
List of Malaysian Standard (MS) for Cables Prepared by MCMA SWO NO. PUBLICATIONS 1. MS 2100 : 2007 2. MS 2101 : 2007 3. MS 2102 : 2007 4. MS 2103 : 2007 5. MS 2104 : 2007 6. MS 2105 : 2007 7. MS 2106 :
Effective discrimination of protective devices
Effective discrimination of protective devices In the event of a fault occurring on an electrical installation only the protective device nearest to the fault should operate,leaving other healthy circuits
Gas Insulated Metal-clad Switchgear, HMGS!
Medium Voltage HMGS-G10 HYUNDAI Medium Voltage Gas Insulated Metal-clad Switchgear, HMGS! SF6 Gas Insulated Metal-clad Switchgear is an integrated assembly of vacuum circuit breaker, 3-position switch,
VEIKI-VNL Electric Large Laboratories Ltd. H-1158-Budapest, Vasgolyó utca 2-4. HUNGARY
VEIKI-VNL Electric Large Laboratories Ltd. H-1158-Budapest, Vasgolyó utca 2-4. HUNGARY VEIKI-VNL Ltd. VEIKI-VNL Electric Large Laboratories Ltd. is an independent accredited testing member laboratory of
Ref No: Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2
Ref No: 95-013 Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2 To: Manufacturers of Industrial Control Equipment Subject: Publication of Technical Information Letter (T.I.L.) No D-21 on Interim
Unitole UP kv Primary substations Motor control centres
Unitole UP 3.6-17.5 kv Primary substations Motor control centres Product Focus Air-insulated withdrawable switchgear with vacuum circuit-breakers and contactors Creating Solutions Eaton creates power-engineering
132/11 kv, 25 MVA MOBILE SUBSTATION
File name: Mob EN katalog1 Zagreb, 11.11.2014. Page: 1 od 9 Summary Mobile substation consists of two semitrailers. One trailer is for 132 kv equipment (HV equipment) and another trailer is for medium
TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH
TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE 1 OF 7 TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH 1.0 SCOPE:
THORNE & DERRICK UK TEL FAX TEL FAX
a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
DRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS
DRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS TECHNICAL SPECIFICATION LOAD BREAK DISCONNECTOR SWITCHES WITHOUT FUSE HOLDER UIT FUSE HOLDER SECTION CONTENTS PAGE 1 General Features 3 2 Standards
Unitole UP kv Primary substations Motor control centres
Unitole UP 3.6-17.5 kv Primary substations Motor control centres Product Focus Air-insulated withdrawable switchgear with vacuum circuit-breakers and contactors Creating Solutions Eaton Holec creates power-engineering
CONTENTS About the company 1. Low-voltage arresters LVA type 2. Metal-oxide surge arresters for distribution systems. 3.
CONTENTS About the company 4 1. Low-voltage arresters LVA type 5 2. Metal-oxide surge arresters for distribution systems. 6 2.1 PA-DM type 6 Dimensions of arresters of PA-DM 9 2.2 PA-DH types 10 Dimensions
Semi-pantograph disconnector type DSSP, up to 300 kv Maximum reliability and minimal maintenance
Semi-pantograph disconnector type DSSP, up to 300 kv Maximum reliability and minimal maintenance Semi-pantograph disconnector type DSSP, up to 300 kv Maximum reliability and minimal maintenance 2 Semi-pantograph
e 2 ALPHA Medium Voltage Switchgear K Catalogue EN
e 2 ALPHA Medium Voltage Switchgear K-1.2.3 Catalogue EN WE CREATE IDEAS WITH POWER! ELEKTROMETAL ENERGETYKA SA provides solutions for electrical power engineering. Our services are carried out by a team
Guideline No.: E-07(201501) E-07 TRANSFORMERS. Issued date: October 20,2015. China Classification Society
Guideline No.: E-07(201501) E-07 TRANSFORMERS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
DC in the LV network: cable challenges. Antonios Tzimas Dimitris Antoniou Simon Rowland
DC in the LV network: cable challenges Antonios Tzimas Dimitris Antoniou Simon Rowland UK Government s 2050 reduction in CO2 emissions target. Top of the network describes the HV transmission where transcontinental
Transforming Energy.. For Advanced Technology
Transforming Energy.. Manufacturers of CE approved Transformers & Reactors Five Decades of Manufacturing Experience Manufacturers of Quality Reliable Transformers. Auto C 201,4 th Cross Peenya Induatrial
SF 6 Gas Insulated Switchgear Type SDH714 for 72.5 to 145 kv
Three-phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDH714 for 72.5 to 145 kv 06B1-E-0020 Small Space Requirement, High Reliability and Safety ー 72.5 to 145kV GIS, SDH714 The number of application
a Nexans company Catalogue 2007
a Nexans company Catalogue 2007 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE
AIR INSULATED EXTENDABLE SWITCHGEAR UP TO 12KV GUIDE Certificate Number FM35831 APPLICATION Typical Uses and Classification The MSGair switchgear is used in transformer and switching substations mainly
Technical Specification
Section - 7 Technical Specification OF 33KV OUTDOOR DROP OUT FUSE CUT-OUT AND FUSE LINK AND 33KV OUTDOOR TYPE SINGLE PHASE METAL OXIDE (ZNO) GAPLESS LIGHTNING ARRESTER 84 7.1. TECHNICAL SPECIFICATION OF