Roxar 2 Hydraulic Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar
|
|
|
- Allyson Russell
- 5 years ago
- Views:
Transcription
1 Roxar 2 Access Fitting System FA-T216-B Product Data Sheet Roxar 2 Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar Safer and More Efficient Operations The Roxar 2 Access and Retrieval system is a complete system for installing and retrieving probes and coupons from high pressure piping, pipelines and vessels under full operational pressure. The system allows for live retrieval tool operations for pressures up to 10,000 psi (690 bar). Maximum operating temperature is 204 C (400 F). Compared to traditional mechanical access systems, Roxar s 2 System has several advantages: Small size, low weight retrieval tool Less probability for galling/seized plugs (no threaded section between plug and fitting) Enhanced safety since the retrieval tool does not contain external moving parts The 2 System was invented by Roxar, and we have more than 25 years of manufacturing and field experience with the product. Roxar s 2 Access and Retrieval System comprises the following components: igh pressure hydraulic access fitting ollow and solid hydraulic plugs eavy duty protective covers for hydraulic system (including pressure proof alternatives) Adaptors for converting mechanical access fittings to hydraulic system retrieval tool (see separate brochure and data sheet) Roxar 2 Access System is also available for injection and sampling applications (Tee type fittings - see applicable data sheet). 1
2 Roxar 2 Access Fitting System Access Fittings ollow and Solid Plugs Roxar 2 Access Fitting System Covers Locking pin hollow plug cover access fitting Corrosion probe Flareweld hydraulic access fitting solid and hollow plugs covers Flareweld hydraulic access fitting - general assembly The Access Fitting has an ACME threaded outlet to mate with the service valve of the hydraulic retrieval tool system. The Access Fitting has no internal threads, thereby eliminating the danger of a seized plug. Four locking pins hold the internal plug in position for the 6,000 psi/420 bar hydraulic fitting, while six locking pins hold the plug in position for the 10,000 psi/690 bar hydraulic fitting. A heavy duty cover holds the plug in position during permanent operation. The locking pins hold the plug in position when cover is removed, until the plug is controlled by the pressure in the hydraulic retrieval tool. Access Fitting Adaptors The hollow or solid plug provides the pressure seal in the access fitting, and is the carrier for the corrosion monitoring device (probe or coupon). The primary packing is made from PTFE (15% glass filled). (Metal seals are available for high temperature service.) The ollow Plug is used for electric probes like Electric Resistance (ER) and Linear Polarization Resistance (LPR) probes. The Solid Plug is used for passive monitoring devices like weight loss coupons, bio coupons and injection/sampling equipment. Please observe that a special design hollow/solid plug is used when a hydraulic access fitting adaptor is required. Also observe that special design reinforced plugs are available for high velocity applications, based on results from wake frequency calculations. covers have two main functions, to protect the external threads used for service valve connection, and to hold the hollow/solid plug in position in the access fitting during the permanent installation. For weight loss coupons and corrosion probes, hydraulic access fitting covers are available also as pressure retaining covers, with pressure rating up to 690bar/10,000 psi. For coupons, the pressure retaining cover contains a pressure gauge and bleed valve. For corrosion probes, the pressure retaining cover also contains a pressure retaining probe connector adaptor. Access Fitting Adaptor Access Fitting Adaptors are available for conversion of mechanical access fittings to hydraulic system. Observe that this conversion can be done on pressurized pipes. Please contact Emerson/Roxar for more details. Flanged Access Fitting The Access Fitting is available in flareweld and flanged versions as standard. Other versions (e.g. UB fittings) are available upon request. Access Fittings are manufactured in ASTM A105, ASTM A50 GR. LF2 and Duplex steel as standard materials (other materials available on request). Access Fittings meet NACE MR0175 (sour service) requirements. Norsok specification upon request. 2
3 Roxar 2 Access Fitting System Selector - Access Fittings Table continued from previous page. Roxar 2 Access Fitting System TAF igh Pressure Access Fitting Pressure Rating 1 (Max psi Design Pressure) Pressure Rating 01 Standard Viton O-rings, ASTM A19 B7 Locking pins 02 Rapid Gas Decompression FR 25/90 O-rings, ASTM A19 B7 Locking pins 1 Max psi Design Pressure 0 Rapid Gas Decompression and/or 100 % Methanol Elast-O-Lion 101 O-rings, ASTM A19 B7 Locking pins 2 1 Max psi Design Pressure Process Connections No Coating 00 Flareweld 20 Flanged 150 lbs RF C1 2, 6 Roxar Standard Coating for CS with operating temperature below 120 C C2 2, 6 Roxar Standard Coating for CS with operating temperature above 120 C 21 Flanged 00 lbs RF 22 Flanged 400/600 lbs RF 2 Flanged 900/1500 lbs RF 24 Flanged 2500 lbs RF 0 Flanged 150 lbs RTJ 1 Flanged 00 lbs RTJ 2 Flanged 400/600 lbs RTJ Flanged 900/1500 lbs RTJ 4 Flanged 2500 lbs RTJ Other Connection C6 2, 7 C 10 TG 10 Roxar Standard Coating for SS Project Specific Coating Tag Plates No Tag Plates Standard Tag plates for fittings Project Specific Tag Plates 0A6A 1 Carbon Steel ASTM A105, bar EN NACE MR0175 0B6A 1 Carbon Steel ASTM A50 Gr. LF2 Cl. 1, bar EN NACE MR0175 2D6A 1 Duplex A 276 / A 479 UNS S180, bar EN NACE MR0175 0AA 2 Carbon Steel ASTM A105, forging EN NACE MR0175 0BA 2 Carbon Steel ASTM A50 Gr. LF2 Cl. 1, forging EN NACE MR0175 2DA 2 Duplex A 182 F51, forging EN NACE MR0175 0A6C 1 Carbon Steel ASTM A105, bar EN NACE MR0175 NORSOK M60 MDS 1 PM 8 T 5,2,9 T 10 Pressure Testing (select any from this group) Pressure test for Flanged Fittings 0B6C 1 Carbon Steel ASTM A50 Gr. LF2 Cl. 1, bar EN NACE MR0175 NORSOK M60 MDS C11 2D6C 1 Duplex A 276 / A 479 UNS S180, bar EN NACE MR0175 NORSOK M60 MDS D47 0AC 2 Carbon Steel ASTM A105, forging EN NACE MR0175 NORSOK M60 MDS 1 0BC 2 Carbon Steel ASTM A50 Gr. LF2 Cl. 1, forging EN NACE MR0175 NORSOK M60 MDS C11 1 Available only with Process Connections option 00, Flareweld 2 Not available with Process Connections option 00, Flareweld 6 Not available with options 0A6A, 0B6A, 2D6A, 2DA, 0A6C, 0B6C, 2D6C, 2DC 7 Not available with options 0A6A, 0B6A, 2D6A, 0AA, 0BA, 0A6C, 0B6C, 2D6C, 0AC, 0BC 8 Not available with options 0A6A, 0B6A, 0AA, 0BA, 0A6C, 0B6C, 0AC,0BC 9 Not available with options 0A6A, 0B6A, 2D6A, 0A6C, 0B6C, 2D6C 10 Not available with Factory Option 2DC 2 Duplex A 182 F51, forging EN NACE MR0175 NORSOK M60 MDS D44 Table continued on next page. 4 5
4 Roxar 2 Access Fitting System Selector - Solid and ollow Plugs Selector - Covers Roxar 2 Access Fitting System TPLUG Plug TCOV Cover Plug type Pressure Rating 00 Solid Plug 1 Max psi Design Pressure 02 ollow Plug Cover Design 0 Reinforced Plug 00 eavy Duty without ole 01 eavy Duty with ole 2C6A Stainless Steel A 479 Gr. 16L, bar EN NACE MR0175 2D6A Duplex A 276 / A 479 UNS S180, bar EN NACE MR Pressure Proof for Solid Plug 0 Pressure Proof for ollow Plug 2C6C Stainless Steel A 479 Gr. 16L, bar EN NACE MR0175 NORSOK M60 MDS S01 2D6C Duplex A 276 / A 479 UNS S180, bar EN NACE MR0175 NORSOK M60 MDS D47 0A6A Carbon Steel ASTM A105, bar EN NACE MR B6A Carbon Steel ASTM A50 Gr. LF2 Cl. 1, bar EN NACE MR0175 2D6A Duplex A 276 / A 479 UNS S180, bar EN NACE MR O-ring Not Applicable PTFE Primary Packing 0A6C Carbon Steel ASTM A105, bar EN NACE MR0175 NORSOK M60 MDS 1 No coating 0B6C Carbon Steel ASTM A50 Gr. LF2 Cl. 1, bar EN NACE MR0175 NORSOK M60 MDS C11 2D6C Duplex A 276 / A 479 UNS S180, bar EN NACE MR0175 NORSOK M60 MDS D Not Applicable 01 Standard Viton O-ring 02 Rapid Gas Decompression FR 25/90 O-ring 0 Rapid Gas Decompression and/or 100 % Methanol Elast-O-Lion 101 O-ring PM No Coating T C1 5 Roxar Standard Coating for CS with operating temperature below 120 C C2 5 Roxar Standard Coating for CS with operating temperature above 120 C Not available with Factory Option C6 6 C 10 A4 Roxar Standard Coating for SS Project Specific Coating Probe Adapter No Probe Adapter Standard Probe Adapter for Pressure Proof Cover Table continued on next page. 6 7
5 Roxar 2 Access Fitting System FA-T216-B Product Data Sheet Table continued from previous page. 10 Other Probe Adapter PM 6 T 10 2 Not available with Cover Design options 02, 0 Not available with Cover Design options 00, 01 4 Not available with Cover Design options 00, 01, 02 5 Not available with options 2D6A, 2D6C 6 Not available with options 0A6A, 0B6A, 0A6C, 0B6C 10 Not available with Factory Option ead Office Roxar products: Emerson Roxar Flow Measurement AS Tel: info.roxar@emerson.com CIS Tel: Europe Tel: North America Tel: Middle East Tel: Asia Pacific Tel: Australia Tel: Latin America Tel: Emerson. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand name is a mark of one of the Emerson Automation Solutions family of business units. All other marks are the property of their respective owners. The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. The Roxar products are protected by patents. See for details. 8
Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
FA-T17-B Product Data Sheet Pressure ratings up to 6,000 psi/40 bar or 10,000 psi/690 bar 1) High Pressure Access Systems Roxar offers a complete range of access fitting assemblies for installation of
Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
Roxar 2 Mechanical Access Fitting System FA-T217-B Product Data Sheet 06.07.2015 Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1) High Pressure
COSASCO ACCESS FITTING ASSEMBLIES
COSASCO ACCESS FITTING ASSEMBLIES Model 5 The Cosasco Access Fitting Assembly is the key to the concept of Access under pressure any time, any place. When used with a Cosasco Retriever and Service Valve,
High Pressure Access Systems
High Pressure Access Systems Operation and Maintenance Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358-4202 Fax: (256)
Fisher Z500 Severe Service Ball Valves
Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve
PRESSURE/TEMPERATURE RATINGS ASME B16.34 VALVES
Emerson valve materials that conform to ASME 16.34 standard class pressure/erature ratings. IMPORTANT INFORMATION FOR TABLES 1. Emerson valves conforming to ASME B16.34 standard have specific pressure/erature
COSASCO ACCESS FITTING ASSEMBLIES
COSASCO ACCESS FITTING ASSEMBLIES Model 5 The Cosasco Access Fi ng Assembly is the key to the concept of Access under pressure any me, any place. When used with a Cosasco Retriever and Service Valve, the
type 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
Fisher V250 Rotary Control Valve
V250 Valve Product Bulletin Fisher V250 Rotary Control Valve The V250 Hi Ball rotary control valve is designed for heavy duty throttling and on off applications. Depending on size, this valve installs
Type B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
COSASCO CHEMICAL INJECTION SYSTEM ACCESS FITTING ASSEMBLIES. Model 53 Socketweld CI
COSASCO CHEMICAL INJECTION SYSTEM ACCESS FITTING ASSEMBLIES Model 53 Socketweld CI Cosasco high pressure chemical injection fittings allow safe, controlled, and easy injection under full operating pressure,
Instrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
Double Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
Fisher V260 Ball Control Valve
Fisher V260 Ball Control Valve The Fisher V260 is a full-bore control valve designed from the ground up with features for optimized pressure, flow and process control. An integral drilled attenuator controls
Design V250 Rotary Control Valve
Product Bulletin Design V250 Rotary Control Valve V250 Valve The Design V250 Hi-Ball rotary control valve (figure 1) is designed for heavy-duty throttling and on-off applications. Depending on size, this
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
Features. Product Bulletin 51.6:8590 August Valve D104017X012
8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
LV690 Series Rotary Control Valve
LV690 Series Rotary Control Valve Made in USA Figure 1: LV690 Series Control Valve 1 Table of Contents Description 2 Features 2 General Data 3 Materials of Construction 5 Installation Information 5 Flow
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
WHEATLEY Series 500. Fire-Tested Carbon Steel Flanged-End Check Valves
WHEATLEY Series 500 Fire-Tested Carbon Steel Flanged-End Check Valves Table of Contents WHEATLEY SERIES 500 FIRE-TESTED CARBON STEEL FLANGED-END CHECK VALVES API 6D/Drilling Production Features and Materials
Fisher 8590 High-Performance Butterfly Valve
8590 Valve Product Bulletin Fisher 8590 High-Performance Butterfly Valve The Fisher 8590 High-Performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure and
Fisher CL600 Control-Disk Valve
CL600 Control-Disk Valve Product Bulletin Fisher CL600 Control-Disk Valve The Fisher CL600 Control-Disk valve provides outstanding performance in a wide range of pressure and temperature conditions. The
Bulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
OBSOLETE DOCUMENT. 167D Series Switching Valves. Bulletin 71.7:167D. Introduction. Features
167D Series Switching Valves P1185 Type 167D Two-way Switching Valve Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are typically used to deliver constant reduced
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
Design V260 Ball Control Valve
Product Bulletin D102352X012 V260 Valve Design V260 Ball Control Valve The Design V260 is a full bore control valve designed from the ground up with features for optimized pressure, flow and process control.
Fisher CCV-N Fuel Gas Control Valve
CCV-N Valve Product Bulletin Fisher CCV-N Fuel Gas Control Valve Fisher CCV-N fuel gas control valves are used in gas turbines which meter the fuel gas to the combustion chamber of the turbine and provide
Fisher V500 Rotary Globe Control Valve
V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
Type 8560 Eccentric Disk Butterfly Control Valve
Product Bulletin 8560 Valve Type 8560 Eccentric Disk Butterfly Control Valve The Type 8560 high-performance valve (figures 1 and 2) features a stainless steel disk with a soft or stainless steel seal ring.
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
PWP Series - PressureGuard Wellhead Protection
PWP Series - PressureGuard Wellhead Protection Self-Contained Hydraulic Emergency Shutdown Valve System API 6A Design/Operation Bettis PWP TM series is a self-contained hydraulic emergency shutdown system.
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
Instrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
Fisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
CAMERON Fully Welded Ball Valves
CAMERON Fully Welded Ball Valves Engineered for heavy duty, limited maintenance performance, with the strength of forged components and a lightweight, compact, spherical design Table of Contents CAMERON
DeltaV SIS TM Auxiliary Components
January 2013 Page 1 DeltaV SIS TM Auxiliary Components Pair the DTA Inverting module or the ETA Direct module with an Auxiliary Relay Diode module to achieve additional functionality. Enables diagnostics
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
Design D4 Control Valve
Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use
Fisher D4 Control Valve Assembly
Product Bulletin D103039X012 Fisher D4 Control Valve Assembly D4 Valve The Fisher D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
KF Series T Ball Valves
K Series T Ball Valves Superior luid Control Products for the Petrochemical and Industrial Markets Series T Ball Valves This top entry valve with a one-piece trunnion supported ball conforms to API specifications
Fisher 461 Increased Outlet Angle Sweep-Flo Valve
461 Valve Product Bulletin Fisher 461 Increased Outlet Angle Sweep-Flo Valve The Fisher 461 Sweep-Flo valve is a self-cleaning, increased outlet, angle valve that is typically used in the chemical and
Fisher Control-Disk Rotary Valve
Product Bulletin Fisher Control-Disk Rotary Valve The Fisher Control-Disk rotary valve offers excellent throttling performance. An equal percentage flow characteristic provides an improved throttling range
Fisher DFA Variable Geometry Desuperheater
DFA Desuperheater Product Bulletin Fisher DFA Variable Geometry Desuperheater The Fisher DFA (Desuperheater with Flexible Architecture) can be used in many applications to efficiently control the spraywater
Fisher CV500 Rotary Control Valve
Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Fisher V500 Rotary Control Valve
Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
Vee-Ball Design V150, V200 and V300 Rotary Control Valves
Product Bulletin Vee-Ball Design V150, V200 and V300 Rotary Control Valves Vee-Ball Valves This bulletin covers the 1- through 2-inch, 3- through 12-inch Series B, and the 14- through 20-inch Design V150,
FPD220 meter 2 di Dual-chamber orifice fitting with double isolation
Data sheet DS/FPD220 EN FPD220 meter 2 di Dual-chamber orifice fitting with double isolation Measurement made easy Safety by design Double isolation with visible proofing mechanism meets HSG253 Category
Fisher FB Control Valve
Fisher FB Control Valve Fisher FB fabricated angle valves are used with compressible fluids on special applications requiring maximum noise attenuation capability and high capacity. Typical applications
COSASCO HYDRAULIC ACCESS FITTING User Manual
COSASCO HYDRAULIC ACCESS FITTING User Manual Rohrback Cosasco Systems, Inc. 11841 E. Smith Avenue Santa Fe Springs, CA 90670 Tel: (562) 949-0123 (800) 635-6898 Fax: (562) 949-3065 E-mail: sales@cosasco.com
Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30
Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling
Fisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
Fisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
SLAM-SHUT VALVE. Type OSE
SLAM-SHUT VALVE Type OSE TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting. The OSE is equipped
Monoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30
Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Fisher easy-e Control Valve NPS 12 through 24x20
Management of Change Guide Fisher easy-e Control Valve NPS 12 through 24x20 Table of Contents Management of Change...2 Background...2 Question & Answer Checklist...2 Comparison of EU/EW to easy-e Valves...6
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
User Manual COSASCO HYDRAULIC ACCESS FITTING
COSASCO HYDRAULIC ACCESS FITTING User Manual Rohrback Cosasco Systems, Inc. 11841 E. Smith Avenue Santa Fe Springs, CA 90670 Tel: (562) 949-0123 (800) 635-6898 Fax: (562) 949-3065 E-mail: sales@cosasco.com
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Bulletin 71.4 D0163X012 Type 1808 February 17 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves
Instrumentation & Piping valves
Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl
Model DF269 Control Valves
Features NACE Service Ready Standard construction for the DF269 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.
590 Control Valves. Features. Model
Features Higher Flow Capacity The straight through flow path allows increased capacity compared to conventional globe style valves. Full ASME Class Shutoff Capabilities In most applications the 590 is
6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
Model 380/381 Control Valves
Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility
ES-665 Series Spring-Loaded Thief Hatch
Instruction Manual D10416X01 ES-66 Series December 017 ES-66 Series Spring-Loaded Thief Hatch Table of Contents Introduction...1 Specifications... Principle of Operation... Tagging Information... Installation...
Model 2000 Control Valves Technical Sales Bulletin
Features Configuration Globe valve with screwed-on bonnet, unbalanced, post-guided valve plug, screwed-in metal seat ring construction, and push-down-to close valve plug action. Low Temperature Construction
Three Piece Forged Trunnion Mounted Ball Valve
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded
Fisher SS-138B Continuous Catalytic Regeneration Valve
SS-18B Valve Product Bulletin Fisher SS-18B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-18B, an NPS 1 through NPS 8 segmented ball valve with metal flow ring construction.
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Bettis GH-Series Pneumatic Spring-Return Actuator Torque Chart Imperial
VA-DC-000-0179 Rev. 2 June 2017 Pneumatic Chart Imperial Copyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website www.emerson.com/bettis
Injection/Sample Quills
Injection/Sample Quills Retractable injection quills are devices that deliver chemicals to a desired location inside piping. Generally, quills are used when relatively small amounts of chemicals are being
Fisher SS-252B Continuous Catalytic Regeneration Valve
SS-252B Valve Product Bulletin Fisher SS-252B Continuous Catalytic Regeneration Valve This bulletin covers the Fisher SS-252B, an NPS 1 through NPS 8 segmented ball valve with an R000 metal seal. The segmented
Process to Instrument Valves Monoflanges and VariAS-Blocks
Process to Instrument Valves Monoflanges and VariAS-Blocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
ivp PROGRAM FNW Ball Valves
ivp PROGRAM FNW Ball Valves PROGRAM OVERVIEW For actuation and accessories, FNW utilizes Wolseley Industrial Group Valve & Automation, or WIGVA. This facility located in Portland, Oregon is a premier valve
Model DF233 Control Valves
Features NACE Service Ready Standard construction for the DF2 control valve features NACE trim. The valve bonnet and body also conform to NACE MR075 (National Association of Corrosion Engineers) recommendations.
DF100 Control Valve. Features. Model. Patents Pending
Features NACE Service Ready Standard construction for the DF100 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.
5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
Fisher CAV4 Control Valve
CAV Valve Product Bulletin Fisher CAV Control Valve The Fisher CAV control valve with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation, where pressure
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
Rosemount 9901 Chamber for Process Level Instrumentation
Product Data Sheet Rosemount 9901 Rosemount 9901 Chamber for Process Level ation Allows external mounting of process level instrumentation Enables live maintenance Designed to ASME 31.3 Process Piping
TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)
Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit
25198:- 1/31/12 11:24 AM Page 2 Filtration Systems
Filtration Systems Indufil Filtration Systems Global Leadership in Design Expertise and Technical Support From its origins more than 95 years ago, John Crane has become a world leader in the design, development
Baumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.