Easer L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m
|
|
|
- Kerry Warren
- 5 years ago
- Views:
Transcription
1 Easer L Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m
2 Versatile Raiseboring rig Designed to drill opening holes in block cave, sub level caving and sub level stoping mines, this versatile raiseboring rig can also be used for precondition holes, pastefill tube holes and media holes. The rig works in drifts of 5.0x5.0 m ( m). When using an 8 inch drill string, Easer L can make conventional holes up to 200 m long, box holes and down reaming up to 60 m long, with a maximum diameter of 750 mm. Easer L has a wide horizontal drill angle, which allows the machine to reach a minimum range of in all directions. Main benefits Versatility. Easer can drill both upwards and downwards as a traditional raiseborer but without the need of a concrete platform. Productivity. Getting that first blast through, with a large easer hole to blast against the risk of freeze the ground is significantly reduced. Accuracy. The raiseboring method with mechanical rock excavation has a hole deviation which is less than 1%.
3 Integrated muck chute Remote controlled crane for easy pipe handling Mine adapted carrier with articulated steering and four wheel drive. Low emission, turbo charged diesel engine Hydraulic wrenching system
4 Easer L As easy as that The name Easer is derived from the expression ease off, meaning to take off or release pressure, which is used in reference to the blast hole into which rock expands during blasting. + Safety The Easer is designed to keep a high level of safety, one example of that is the radio remote crane installed to handle drill pipes. No manual labor is required with the drill pipes, stabilizers or the reamer. All moving and lifting is done with the crane within an area of 4 meter radius. + Versatility No site preparation is necessary, and all equipment, except the drill rods, are part of the carrier. In addition, and most importantly, Easer is wheelbound, making it exeptionally easy to move to wherever it is needed in the mine. + Atlas Copco RCS As early as 1998, Atlas Copco introduced its Rig Control System (RCS) a computerized control system for drilling rigs that stunned the market. More than 3000 RCS rigs are currently in operation the world over. Long experience and an ongoing dialogue with customers have resulted in increasingly sophisticated functions with expertise that makes Atlas Copco uniquely qualified to drive development in the industry. Atlas Copco service It s not just about our promises, it s about delivery We offers several levels of service agreements to meet the requirements of your operation and to secure your productivity. Our service agreements help you build a quality operation focused on proactive, planned maintenance to minimize unplanned downtime. We support maintenance with detailed parts information on every piece within our full inventory of components, accessories, and tools.
5 Technical specifications = Standard = Option Rotation system Radial piston motor Hydrostatic drive system Gear box ratio 3,79:1 Drive head Floating drive box with DI22 thread Position sensor and gauge Gearbox lubrication Standalone lubrication system 30L Filtration 25 microns Oil cooled via hydraulic system Pipeloader Swing in/out Crane Lifting capacity kg Gripper arm Radio remote control Built in overload protection PIPELOADER WRENCH SYSTEM Drive head - Semi automatic Work table - Sliding work table doors Stingers 4 x roof stingers mm stroke 4 x floor stingers mm stroke Muck chute Extension 800 mm Water nozzles Control system Atlas Copco Rig Control System Angle reading Auto make up log Net force control Bailing pressure supervision MWD Measure while drilling RRA Rig remote access Remote controlled camera on tripod with monitor in cabin Water system Cooling water 60 L/min at 25 C Minimum water inlet pressure 2 bar Water booster pump on board Water pressure gauge Water hose reel, including water hose Electrical system Total installed power 173 kw Main motors - Rotation 110 kw - Aux circuit 55 kw Voltage V Frequency 50 or 60Hz Power requirement 227 kva Starting method - Rotation motor Star Delta (Y/D) start - Aux motor Direct Online (DOL) start Transformer 8kVA Extra transformer 3-phase -15kVA (230/400V outlet) Electronic overload protection for electric motors Digital volt/ampere meter in electrical cabinet Stainless steel electrical enclosure (A-cabinet) Phase fault indicator Earth fault relay Battery charger Cable reel with limiting switch Electrical cable (Buflex) Plug Connector Socket Switch gear Carrier Engine Deutz TCD 2013 L06 2V (175 kw) Engine heater Hot climate tramming kit Articulated ±38 steering angle Heater for hydraulic oil tank, electrical motors and diesel engine Four wheel drive Electrical system 24V Batteries 2 x 125Ah Automatic differential lock on front axle, limited slip Tyres, R24 Tramming light 10 x 22W Working light 2 x 1000W + 4 x 80W Fuel tank volume 175 L Central lubrication system Fire extinguisher Fire suppression system ANSUL -manual release Fire suppression system ANSUL -Automatic release (checkfire) Fire suppression system ANSUL -Automatic release (CO2) Fire suppression system FORREX -Automatic release (CO2) Rig washing kit Rig alignement laser Brake lights
6 Technical specifications Weight Total kg Drilling unit side kg Engine side kg Recommended cable sizes and lengths V 185 mm 2 90 m V 95 mm m V 50 mm m Recommendations are given for surrounding temperature of 40 C. Dimensions Width Height tramming Length tramming Ground clearence Turning radius outer/inner Diameter Drill pipe Length Thread Pilot hole diameter mm mm mm 250 mm 4 814/7 862 mm 203 mm mm 6-3/4 DI mm Performance Boxhole Raise diameter Down reaming Boxhole Raise length Down reaming Reaming Maximum torque Break out Pilot Reaming thrust at 260 bar Stroke Fast traverse Traverse rate Feed rate Bailing water 750 mm 750 mm 60 m 60 m 40 knm 50 knm 20 knm 600 kn mm 2 m/min 2 m/min 400 L/min at 25 bar Cabin options Cabin body made of stainless steel Cabin lift and tilt system Front window 22mm Heating function for air condition (water transferred) Spot light: 70W Left side Spot light: 70W Right side Reversing camera with monitor Protection bars, front window Miscellaneous options Bit breaker box 9 Starter bushing Automatic lubrication for drilling and positioning unit Nr-Cr plated pistons rods (limited selection on request)
7 Technical specifications
8 c 2017 Örebro, Sweden. Legal Notice Copyright 2017, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. Commited to sustainable productivity We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity.
ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
ROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter
ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO
Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
BOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters
BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.
SIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment
SIMBA E7-SERIES Hydraulic long hole production drill rig for medium to large size drifts, with excellent cover area and flexibility. Hole range from 51 up to 127 mm. SIMBA PRODUCTION DRILLING IN MEDIUM
BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²
BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE
BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
BOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
ROBBINS 73-SERIES. Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter
ROBBINS 73-SERIES Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter RAISEBORING SPECIALIST ROBBINS 73 RIGS ARE THE STURDIEST, MOST WIDELY SOLD RAISEBORING RIGS IN
BOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
BOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.
BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE
Boltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters
Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for
Boltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
Boltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters
Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.
MAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig
SIMBA E6-W(WL) Hydraulic long hole production drill rigs for medium to large size mining, powerfull ITH- water hammer for long straight holes with high demand for hole quality. Hole range from 89 up to
Boomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
SIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M6 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA HIGH PRECISION SOLUTION THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION
Robbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter
Robbins 91/123 Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter 1 Compact and powerful The Robbins 91 and Robbins 123 rigs are powerful raise-boring rigs with
Boomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
MEYCO ME5. Mobile concrete spraying for large sized tunnels
MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy
SIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA THE STURDY SIMBA M4 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO
Boomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
Boomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
Boomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
Boomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
Precise and flexible production drilling
Simba E7-series Hydraulic long-hole production drill rig for medium to large size drifts, with excellent coverage area and hole range from 51 to 178 mm 1 Precise and flexible production drilling The drill
Boomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
Simba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
MEYCO ME3. Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS
Simba S7. Rugged rig with smart design and increased automation made for tight, tough conditions
Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This
Boomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
Simba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter
Simba M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 Compact and powerful long-hole drilling solution The sturdy Simba M4 is a
Boomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2
Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of
Boomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
High precision solution
Simba M6 Hydraulic production drill rig with I-beam mounted drilling unit for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 High precision solution The sturdy Simba
Boomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
SCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity
SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY
SCOOPTRAM ST7 BATTERY
SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation
MINETRUCK MT42. Underground truck with 42-tonne load capacity
MINETRUCK MT42 Underground truck with 42-tonne load capacity MINETRUCK MT42 SUPERIOR UNDERGROUND HAULAGE THE MINETRUCK MT42 IS A HIGH SPEED, 42-TONNE ARTICULATED UNDERGROUND TRUCK, FEATURING STATE-OF-THE-ART
MINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
MINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity
MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF
FLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone
SMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )
SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST
MINETRUCK MT65. Underground truck with 65-tonne load capacity
MINETRUCK MT65 Underground truck with 65-tonne load capacity MINETRUCK MT65 EFFICIENT UNDERGROUND HAULAGE ENGINEERED WITH SAFETY, PRODUCTIVITY AND OPERATOR COMFORT IN MIND FOR HAULAGE IN LARGER UNDERGROUND
Minetruck MT65. Underground truck with 65-tonne load capacity
Minetruck MT65 Underground truck with 65-tonne load capacity Minetruck MT65 Efficient underground haulage Engineered with safety, productivity and operator comfort in mind for haulage in larger underground
MINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
Häggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
FLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD
SCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity
SCOOPTRAM ST7 Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 THE LATEST TECHNOLOGY IN NARROW VEIN MINING THE SCOOPTRAM ST7 IS A ROBUST LOADER THAT IS BUILT FOR DEMANDING UNDERGROUND
Scooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity Scooptram ST14 Superior underground mucking The new Scooptram ST14 is full with new features that makes it more powerful and yet more fuel efficient.
FLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF
ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder.
FACE MASTER Page 1 of 2.0 6 Twin boom drill rig ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder. MAIN COMPONENTS Rockdrill Montabert HC 109 Boom B 40
5200 ITH Specifications and Features
2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
Christensen CT20. Surface core drill rig for mineral exploration
Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,
SMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY With the SmartROC
SmartROC CL Surface drill rig for open pit mining and selective mining
SmartROC CL Surface drill rig for open pit mining and selective mining Hole diameter: 115 216 mm (4.5 8.5 ) The SmartROC CL is built to beat the rock The fuel-efficient SmartROC CL is one of the most powerful
FlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions
SMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY WITH THE SMARTROC T45
FlexiROC D60/D65 Surface drill rig for quarrying and construction
FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60
FlexiROC T20 R A drill rig for surface- and underground construction
FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new
SMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining.
SMARTROC D65 Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining. Hole diameter 110 203 mm (4 5/16 8") THE MINING MASTERMIND THE SMARTROC
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s
Häggloader. A unique continuous loading system
Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
Scooptram EST1030. Electric underground loader with 10-tonne capacity
Scooptram EST1030 Electric underground loader with 10-tonne capacity 1 Electrically powered to save energy, time and money The Scooptram EST1030 is a fast, electrically powered loader with a 10 tonne capacity
SmartROC T45 Surface drill rig for quarrying and construction
SmartROC T45 Surface drill rig for quarrying and construction Folding boom hole diameter: 89 127 mm (3,5" 5") Standard boom hole diameter: 89 140 mm (3,5" 5,5") Smart and precise efficiency With the SmartROC
Minetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes Minetruck MT54 Productive underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. Hole diameter: 70 105 mm (2.75" 4.25") Speed up your profits SpeedROC D30 is a versatile and flexible
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
Scooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader
Scooptram ST7 Battery Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader 1 Cutting costs and boosting productivity with smart solutions The
Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA
Equipment includes options and extra equipment. Features is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable tunnel cross-sections.
Charmec LC 605 D(V) Features. Technical data sheet
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
PowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: 90 165mm ( 3 9/16 6 1/2 ) Power up your performance The PowerROC D55 is designed according to our philosophy
Spraymec 8100 VC. Features. Technical data sheet
Equipment includes options and extra equipment. Features Spraymec 8100 VC is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable
SANDVIK LH204 UNDERGROUND LOADER
UNDERGROUND LOADER Sandvik LH204 is designed to give maximum tramming capacity in narrow mining and tunneling applications. The hydrostatic drive system delivers high tractive effort for maximum penetration
SANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
Diamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
Charmec LC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6
powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about
Surface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features
Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform
Charmec MC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Charmec MF 605 D charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
Scooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity
Scooptram ST7LP Low-profile underground loader with 6.8-tonne capacity 1 Superior productivity in low seam applications The low-profile Scooptram ST7LP with a back height of only 1.6 M is a robust underground
Spraymec MF 050 VC. Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Spraymec MF 050 VC is an electrohydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium
Scooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity 1 Superior underground mucking The Scooptram ST14 is full with features that makes it powerful and yet fuel efficient and the thorough improvements
Minetruck MT42. Underground truck with 42-tonne load capacity
Minetruck MT42 Underground truck with 42-tonne load capacity 1 Superior underground haulage Minetruck MT42 is a high speed, 42-metric tonne articulated underground truck, featuring state-of-the-art levels
Spraymec SF 050 D. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Spraymec SF 050 D is a diesel-hydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium size
Utimec SF 060 Material
Pictured machine may include options and additional equipment. Features Utimec SF 060 Material vehicle is designed for material transportation in small or medium size tunnel cross sections. With the transport
SmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
FlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
Scamec 2000 L. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 L is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
Explorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
Scamec 2000 M. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 M is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
SERPENT. A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation.
SERPENT A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation. CONTROL THE AIR. CONTROL YOUR BUSINESS. THE SERPENT
RAISEBORING DRILL PIPES
Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring
Scooptram ST7. Underground small size loader with 6.8-tonne capacity
Scooptram ST7 Underground small size loader with 6.8-tonne capacity 1 The latest technology in narrow vein mining The Scooptram ST7 is a robust loader which is built for demanding underground applications
RC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1.
Drilling depth capacity s are based on feedback from field operatives and can be reasonably expected with vertical, water filled holes, by well-trained drilling crew using high quality drilling tools.
Unigrout Flex M. The flexible grouting system
Unigrout Flex M The flexible grouting system Unigrout Flex M A flexible grouting system Quick and easy to move, the complete Unigrout Flex M system consists of a manually operated grouting platform which