Rail Vehicle Systems NYR-455. Rev en. Maintenance Specification. 9 x 8 UAH Brake Cylinders P/N ,
|
|
- Abraham Chapman
- 5 years ago
- Views:
Transcription
1 Rail Vehicle Systems NYR-455 Rev en Maintenance Specification 9 x 8 UAH Brake Cylinders P/N ,
2 Contact Address New York Air Brake 748 Starbuck Avenue Watertown, NY USA Phone: Fax: Confidentiality The information in this document and the document itself, in whole or in part, in any form ("Information") is proprietary and/or confidential property of New York Air Brake, a Knorr Brake company, and its affiliates and its successors and assignees, who retain and reserve all right, title and interest in this Information in whole or in part and in all forms. This Information is provided to the original recipient only for confidential use, with the understanding that it will not be used in any manner detrimental to the interests of New York Air Brake, and subject to return on request. Reproduction, transmission, distribution or publication of this Information in any form, in whole or in part, for any purpose without prior written permission of New York Air Brake is strictly prohibited. Copyright New York Air Brake All rights reserved. CONFIDENTIAL Page 2 / 19
3 Revision History Rev Date Name Para Description of change 01 1/6/05 All Original Issue 02 2/23/17 J. Shippee All Removed obsolete part numbers and Added references to parts catalogs PC and PC Updated Figure 9-1. Reformatted in COPE. The original document was issued in English language. Page 3 / 19
4 Table of Contents 1 General Information 5 2 Safety Awareness 8 3 Tools Required 9 4 Adhesives, Lubricants, Sealants, and Solvents 9 5 Disassembly 10 6 Cleaning, Inspecting, and Repairing 11 7 Lubricating and Reassembly 13 8 Test Requirements 14 9 Supporting Information 15 List of Figures Figure x 8 UAH Brake Cylinder without Push Rod. 15 Figure 9-2 Brake Cylinder Non-Pressure Head Disassembly.. 16 Figure 9-3 Brake Cylinder Non-Pressure Head Assembly 17 Figure 9-4 Mounting Cone.. 18 Page 4 / 19
5 1 General Information 1.1 Introduction This document contains particulars specific to the overhaul of UAH Brake Cylinders P/N and This document defines the various procedures and information required to disassemble, clean, inspect, and re-assemble the Brake Cylinders. Part Number Drawing Number Size DESCRIPTION N " x 8" UAH Brake Cylinder w/push Rod N " x 8" UAH Brake Cylinder without Push Rod 1.2 Technical Changes New York Air Brake reserves the right to change the equipment or this document at any time without giving special notice. 1.3 Target Group This maintenance specification is intended for use by trained technicians who: Have the skill, experience, safety awareness and professional ability to - Disassemble and re-assemble air brake products - Inspect and gauge critical components Have read and understand this document in its entirety Are familiar with the safety codes and accident prevention regulations for these activities 1.4 Referenced Documents Doc. ID Doc. No Title /1/ Assembly Drawing, 9x8 UAH Brake Cylinder w/push Rod /2/ Assembly Drawing, 9x8 UAH Brake Cylinder /3/ PC Parts Catalog, 9x8 UAH Brake Cylinder w/push Rod /4/ PC Parts Catalog, 9x8 UAH Brake Cylinder Page 5 / 19
6 1.5 Danger and Warning, Caution, and Note (Notice) Messages These symbols indicate that important personal safety information follows. Carefully read and understand each safety related text message and apply the message to the operation and maintenance of the system as defined in the safety alert message. The following are definitions associated with the different safety alert message categories. The words DANGER, WARNING, and CAUTION are used to identify levels of hazard seriousness for the safety of the personnel and the equipment. The word DANGER is used to signify an immediate hazard and is used throughout this manual in the following manner: DANGER Indicates an imminently hazardous situation, which if not avoided, will result in death or serious injury. This word is to be limited to the most extreme situations. The word WARNING is used to signify hazards or unsafe practices and is used throughout this manual in the following manner: WARNING Failure to comply with these instructions may lead to irreversible physical injuries which may have fatal consequences. The word CAUTION just like the word WARNING is used to signify hazards or unsafe practice in addition to equipment damage and is used throughout this manual in the following manner: CAUTION Failure to comply with these instructions may lead to personal injuries and/or to damage to the unit or the environment. The NOTE (NOTICE) messages are used throughout this manual in the following manner: NOTE Notes do not contain any messages relevant to safety. Notes contain useful hints and additional information used to highlight suggestions which will result in enhanced installation, reliability, or operation. Page 6 / 19
7 Safety messages/notes have a specific structure which is explained here for DANGER (This also applies to WARNINGS and CAUTIONS): DANGER Source of the danger Consequences of the danger Remedial measures Notes do not contain any messages relevant to safety and are included only for the sake of completeness. NOTE Notes contain useful hints and additional information about the unit. Page 7 / 19
8 2 Safety Awareness 2.1 General Safety Awareness Observe all rules and regulations where the equipment is being used. Whenever there is a conflict between the instructions in this manual and the instructions of the user, the rules and regulations of the user will govern De-pressurize air system before loosening connections or components. Before removing any component from its mountings, the train must be safely parked. To prevent personal injury, all main reservoir, brake supply reservoir, and brake cylinder air pressure on the affected vehicle must be vented "Bottled" up air under pressure (even though air supply is cut off) may cause gaskets and/or particles of dirt to become airborne and an increase in sound level when any component part is removed from the equipment arrangement. Personal eye and ear protection must be worn and care taken to avoid possible injury when performing any work on these component parts The use of an air jet, which must be less than 30 PSI, to blow parts clean or to blow them dry after being cleaned with a solvent, will cause particles of dirt and/or droplets of the cleaning solvent to be airborne. These particles and droplets may cause skin and /or eye irritation. Personal eye protection must be worn to protect the eyes from possible injury. When using an air jet do not direct it toward another person If degreasing fluids are used for cleaning purposes, the current local safety regulations plus the safety precautionary statements of the manufacturer of the cleaning agent must be adhered to. Otherwise, physical harm could result from the inhalation of toxic fumes. Make sure the area is well ventilated when working with materials that produce harmful fumes Personal eye protection must be worn when doing any work to protect eyes from possible injury Where fasteners removed from the equipment are not satisfactory for reuse, care must be taken to select replacements that match the originals. Mismatched or incorrect fasteners can result in equipment damage or malfunction, or possible personal injury To ensure the correct functioning of each component, use only the manufacturers genuine spare parts as replacements Follow all DANGERS, WARNINGS, CAUTIONS, and NOTES found throughout this specification. If you must use a work procedure or tool which is not recommended, you must first satisfy yourself that neither your safety, nor your fellow workers safety, nor that of the equipment will be jeopardized by the method selected Person(s) having the appropriate job skill level, as governed by the user, are required when performing maintenance and/or operational tasks with the brake system and system components. Page 8 / 19
9 3 Tools Required 3.1 Standard Tools Socket, 1/2", 3/4" and Socket Wrench Retaining Ring Pliers Mounting Tube Press 3.2 Special Tools Mounting Cone (see Fig. 9-4) 4 Adhesives, Lubricants, Sealants, and Solvents 4.1 Lubricants AAR Spec. M-914 Grease or brake cylinder lubricant New Journal Box Oil or Triple Valve Oil (AAR Spec. M-912) 4.2 Solvents Mineral Spirits (or equivalent) Page 9 / 19
10 5 Disassembly (See Figure 9-1) 5.1 If complete brake cylinder (1-18) was removed from rail car, remove four nuts (13) from screws (2). Remove the remaining parts (3-18) from cylinder body (1). 5.2 Remove and discard packing cup (3) from piston and pipe assembly (4). Remove and discard gasket (6) from body (1). 5.3 Remove cotter pin (17) from pin (16), then remove pin (16) from push rod holder (14). 5.4 Place the brake cylinder piston and non-pressure head assembly (4-15) in a suitable holding fixture. With the aid of a press and a mounting tube, hold the release spring partially compressed. WARNING Compression spring (5) is pre-compressed to 180 lbs. (800 newtons). Care must be exercised during further disassembly. 5.5 With the press securely locked, loosen screws (15) and then remove push rod holder (14). Discard screws (15). Slowly release the press to relieve compression on spring (5). 5.6 Remove non-pressure head (10), release spring (5), piston and pipe assembly (4), swab and retainer assembly (7) and spring seat (9). Separate all parts. Discard swab and retainer assembly (7). 5.7 Remove retaining ring (12) and strainer (11). Page 10 / 19
11 6 Cleaning, Inspecting, and Repairing (See Figure 9-1) 6.1 Wash all parts in a suitable solvent that will dissolve oil or grease and permit all the parts to be thoroughly cleaned without abrasion (i.e. mineral spirits). WARNING Solvents and solvent fumes can be harmful to health. When using solvents, be sure to: Wear eye, skin, and respiratory protection. Work in a well-ventilated area. Avoid repeated or prolonged contact. Keep solvent container closed. Keep solvent away from sparks, flames, and heat. Failure to observe these safety precautions can lead to injury or intoxication. WARNING Cleaning using compressed air can cause particles to become airborne, be sure to: Wear eye protection. Do not exceed 30 PSIG. Failure to observe these safety precautions can lead to injury. 6.2 Blow all parts dry using clean, dry, low-pressure compressed air. 6.3 Clean piston and pipe assembly (4), removing any rust or rough surfaces, using emery cloth, if necessary. 6.4 Clean release spring (5), remove rust spots and apply rust preventative or brake cylinder lubricant (AAR Spec. M-914). 6.5 Replace all parts previously discarded. Page 11 / 19
12 6.6 Replace all parts that are cracked, broken, worn, damaged, or in such a condition as would result in unsatisfactory operation. 6.7 Ordering Spare Parts To order spare parts, reference parts catalogs PC and PC Page 12 / 19
13 7 Lubricating and Reassembly 7.1 Prior to assembly, saturate the swab and retainer assembly (7) in New Journal Box Oil or Triple Valve Oil (AAR Spec. M-912) for at least ten minutes. 7.2 Insert new strainer (11) into non-pressure head assembly (10) and secure in place with retaining ring (12). 7.3 Apply brake cylinder lubricant (AAR Spec. M-914) to spring (5) 7.4 After completely coating the piston and pipe assembly (4) with a light film of brake cylinder lubricant (AAR Spec. M-914), place the piston end in a holding fixture and slip the mounting cone (see Fig. 9-4) into the piston and pipe assembly (4). 7.5 Install spring (5) over the piston and pipe assembly (4). Place spring seat (9) on top of spring (5). 7.6 Place the swab and retainer assembly (7) onto spring seat (9). Place non-pressure head assembly (10) over the swab and retainer assembly (7). With the aid of a press and a mounting tube partly compress release spring (5) until there is a sufficient amount of the piston and pipe assembly (4) visible to install push rod holder (14). WARNING Spring will be compressed to 180 lbs. (800 Newtons). Care must be exercised during further assembly With the press securely locked, place push rod holder (14) onto piston and pipe assembly (4). Install new self-locking set screws (15). Tighten screws (15) to 8 ± 2 ft-lbs (dry torque) Slowly release the press. Remove the mounting cone and the mounting tube, and then remove the assembly from the holding fixture. 7.7 Install pin (16) in push rod holder (14), and then install new cotter pins (17) in pin (16). 7.8 Apply new packing cup (3) to piston and pipe assembly (4) by starting the cup over one edge of piston and, while holding it in this position, work the cup into place with the hands. If the cup does not seat properly due to trapped air, the air can be removed by raising one side of the cup, using a wooden tool, and pushing the cup into place using the hands. NOTE If the complete cylinder was removed from the car, complete step 7.9. Page 13 / 19
14 7.9 Place new, greased gasket (6) onto body (1). Insert piston and non-pressure head assembly (3-18) into body (1) and secure to body (1) using screws (2) and nuts (13). Tighten nuts (13) to 35 ± 2 ftlbs (dry torque). NOTE If ONLY the piston assembly with the non-pressure head was removed from the car, suitable covers or containers must be provided so that all parts will be adequately protected against damage and contact with any kind of dirt. 8 Test Requirements If the complete cylinder assembly was overhauled, the complete UAH Brake Cylinder must be tested in accordance with instructions given in Test Document NYT-689-C. If ONLY the piston assembly with the non-pressure head, as received from the Repair Track, was overhauled, the UAH brake cylinder must be tested per S-486 latest issue when re-installed on the car. Page 14 / 19
15 9 Supporting Information 9.1 Exploded View 1. Cylinder Body 10. Non-Pressure Head 2. Tee Head Bolt 11. Strainer 3. Packing cup 12. Retaining Ring 4. Piston and Pipe Assembly 13. Hex Locknut 5. Compression Spring 14. Push Rod Holder 6. Gasket 15. Self-Locking Set Screw 7. Swab and Retainer Assembly 16. Push Rod Holder Pin 8. Spring Guide 17. Cotter Pin 9. Spring Seat 18. Flange Protector Figure x 8 UAH Brake Cylinder without Push Rod Page 15 / 19
16 9.2 Special Tool Drawings Figure 9-2 Brake Cylinder Non-Pressure Head Disassembly Page 16 / 19
17 Figure 9-3 Brake Cylinder Non-Pressure Head Assembly Page 17 / 19
18 Figure 9-4 Mounting Cone Page 18 / 19
19 9.3 Abbreviations and Acronyms Abbreviation or Acronym Definition AAR Association of American Railroads Dia. Diameter Doc. Document En English Fig. Figure Ft-lbs. Foot-Pounds (torque) ID Identification Lbs. Pounds Mm Millimeters N Newtons No. Number NYR Repair Code NYT Test Code Para. Paragraph PC Parts Catalog P/N Part Number PSI Pounds per square inch PSIG Pounds per square inch (gauge) Rev. Revision µm Micrometer µin Microinch Page 19 / 19
Rail Vehicle Systems NYR-467. Rev en. Maintenance Specification. KRD-482-E Slack Adjuster Assembly P/N
Rail Vehicle Systems NYR-467 Rev 02 2-25-2015 - en Maintenance Specification P/N 790240 Contact Address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1 315 786 5200 Fax: +1 315
More informationSLACK ADJUSTER INSTALLATION & MAINTENANCE GUIDE FOR MODEL KRD-133-L USED ON TTX-TMB (MISNER) P/N
SLACK ADJUSTER INSTALLATION & MAINTENANCE GUIDE FOR MODEL KRD-133-L USED ON TTX-TMB (MISNER) P/N 783414 IP - 243 Issue No. 1 4/9/08 1.0 SAFETY To prevent physical injury or death, all personnel directly
More informationUAHT BRAKE CYLINDERS. operation & maintenance instruction , S.12 NOVEMBER, Supersedes issue dated November, 1986
4214-4, S.12 UAHT BRAKE CYLINDERS NOVEMBER, 1989 Supersedes issue dated November, 1986 NOTE: The following description and operation is based on this device and its components being new or this device
More information"N-1-A" REDUCING VALVE, Part No with "N" REDUCING VALVE PORTION, Part No
"N-1-A" REDUCING VALVE, Part No. 528348 with "N" REDUCING VALVE PORTION, Part No. 529445 DECEMBER, 1984 NOTE: The following description and operation is based on this device and its components being new
More informationRail Vehicle Systems ... IP-203. Rev. 03 (10/17/12) -en ... Instruction Pamphlet. TMB-60 Truck Mounted Brake System Brake Head and Shoe Replacement
Rail Vehicle Systems...... IP-203 Rev. 03 (10/17/12) -en...... TMB-60 Truck Mounted Brake System Brake Head and Shoe Replacement Contact address New York Air Brake Corporation 748 Starbuck Avenue Watertown,
More information28-A DOUBLE CHECK VALVE PORTION, Pc. No
28-A DOUBLE CHECK VALVE PORTION, Pc. No. 650143 NOVEMBER, 1989 Supersedes issue dated January, 1989 NOTE: The following description and operation is based on this device and its components being new or
More informationD-1-A TRIPLE VALVE, PC. NO
D-1-A TRIPLE VALVE, PC. NO. 577893 MARCH, 1985 Supersedes issue dated July, 1984 NOTE: The following description and operation is based on this device and its components being new or this device and its
More informationOperation & Maintenance Instruction , S.9. MARCH, 2005 Supersedes issue dated March, 2003
S-1 LOAD SENSOR VALVES, SUSPENSION MOUNTING - PART NO. 664801-0001 SUSPENSION MOUNTING - PART NO. 665132-0001 FLOOR MOUNTING - PART NO. 664801-0002 FLOOR MOUNTING - PART NO. 665132-0002 MARCH, 2005 Supersedes
More informationS-1 LOAD SENSOR VALVES, PART NOS & PART NOS &
S-1 LOAD SENSOR VALVES, PART NOS. 578553-0001 & 578553-0011 PART NOS. 665133-0001 & 665133-0011 AUGUST, 2005 Supersedes issue dated December, 2004 NOTE: The following description and operation is based
More informationP-1 LOAD PROPORTIONAL VALVE, (60%), Pc.No
P-1 LOAD PROPORTIONAL VALVE, (60%), Pc.No. 577723 DECEMBER, 1988 Supersedes issue dated November, 1976 NOTE: The following description and operation is based on this device and its components being new
More informationJ-1 RELAY VALVE, Part No J-1 RELAY VALVE PORTION, Part No
J-1 RELAY VALVE, Part No. 557290 J-1 RELAY VALVE PORTION, Part No. 556441 (Single Diaphragm Type) NOVEMBER, 1984 Supersedes issue dated November, 1981 NOTE: The following description and operation is based
More information1" COMBINED DIRT COLLECTOR & DYNABALL TM CUT-OUT COCK PORTION
1" COMBINED DIRT COLLECTOR & DYNABALL TM CUT-OUT COCK PORTION Part No. 577071 IMPORTANT: This catalog is published as an aid in identifying the detail parts that make up this complete device. Refer to
More informationDEAD ENGINE FIXTURE PORTION
V 4243-1 Operation & Maintance Information DEAD ENGINE FIXTURE PORTION "U-1-65-8" Dead Engine Fixture, PART NO. 653968 "U-1-40-8" Dead Engine Fixture, PART NO. 569299 AUGUST, 2000 Supersedes issue dated
More information#8 VENT VALVE with BRANCH PIPE TEE, Part No
#8 VENT VALVE with BRANCH PIPE TEE, Part No. 579076 JANUARY, 001 Supersedes Issue dated November, 1988 NOTE: The following description and operation is based on this device and its components being new
More information26-LU-L BRACKET-CARRIAGE AND EQUIPMENT, PART NO
26-LU-L BRACKET-CARRIAGE AND EQUIPMENT, PART NO. 655031 OCTOBER, 2006 NOTE: The following description and operation is based on this device and its components being new or this device and its components
More informationVX VENT VALVE PORTION
VX VENT VALVE PORTION Part No. 660372 NOTE: The following description and operation is based on this device and its components being new or this device and its components having been repaired, tested,
More informationRail Vehicle Systems ... PC Rev. U (12/5/17) -en ... Parts Catalog. DB20 Emergency Portion (Cast Iron) P/N I85177/001D (769141)
Rail Vehicle Systems...... PC-769141 Rev. U (12/5/17) -en...... Parts Catalog P/N I85177/001D (769141) EP Parts Catalog Contact address New York Air Brake 748 Starbuck Avenue Phone: +1 315 786 5200 Watertown,
More informationRail Vehicle Systems ... PC Rev. P (1/4/18) -en ... Parts Catalog. DB20 Emergency Portion (Aluminum)
Rail Vehicle Systems...... PC-775871 Rev. P (1/4/18) -en...... Parts Catalog DB20 Emergency Portion (Aluminum) EP Parts Catalog Contact address New York Air Brake 748 Starbuck Avenue Phone: +1 315 786
More information26-F CONTROL VALVE, Pc.No
26-F CONTROL VALVE, Pc.No. 590359 JANUARY, 1987 NOTE: The following description and operation is based on this device and its components being new or this device and its components having been repaired,
More informationRail Vehicle Systems ... PC Rev. D (1/29/15) -en... Parts Catalog. Dirt Collector and Cut-Out Cock w/strainer
Rail Vehicle Systems PC-772124 ( Rev. D (1/29/15) -en Parts Catalog and Cut-Out Cock w/strainer Contact address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1 315 786 5200 Fax:
More informationUpdate Manual. Manufacturing, Inc. 7 & 10 End Wheel No-Till Clutch Linkage. P.O. Box 218 Assaria, Kansas Effective 5/3/ M
Update Manual 7 & 10 End Wheel No-Till Clutch Linkage Manufacturing, Inc. P.O. Box 218 Assaria, Kansas 67416 Effective 5/3/96 152-156M General Information General Information Important Notice Great Plains
More information"HS-2A" DISC BRAKE UNIT CALIPER
"HS-2A" DISC BRAKE UNIT CALIPER Part No. 0695887 February, 2004 This document is comprised of pages i through viii and pages 1 through 27. Copyright 2004 Wabtec Corporation. P.O. BOX 11 SPARTANBURG, SC
More informationPredelivery Instructions
PINK Predelivery Instructions SR5030 Split-Row Planter Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read this manual entirely. When you see this symbol, the subsequent instructions and
More informationTurbocharger / VTR..0, VTR..1 Original assembly instructions English
Assembly Instructions Turbocharger / VTR..0, VTR..1 Original assembly instructions English This document is valid for the VTR..0/..1 series: VTR160, VTR200, VTR250, VTR320, VTR400 VTR161, VTR201, VTR251,
More informationInstallation, Operating and Maintenance Instructions. Rotating Machine Screw Actuators. With Parts List Publication Part No.
Installation, Operating and Maintenance Instructions With Parts List Publication Part No. SK-2389-R1 Rotating Machine Screw Actuators 1/4 Through 1-Ton Capacity Caution This manual contains important information
More informationOperator s/parts Manual
Operator s/parts Manual 3-Point Solid Stand Drills Pull Hitch Package Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the operator s manual entirely. When you see this symbol, the subsequent
More informationRail Vehicle Systems ... PC Rev. E (4/14/16) -en ... Parts Catalog. KRD-482-E Slack Adjuster Assembly
Rail Vehicle Systems...... PC-783901 Rev. E (4/14/16) -en...... Parts Catalog Assembly Contact address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1 315 786 5200 Fax: +1 315
More informationTurbocharger / TPS-H Original assembly instructions English
Assembly Instructions Turbocharger / TPS-H Original assembly instructions English This document is valid for the TPS-H series: TPS44-H, TPS48-H, TPS52-H Purpose TPS-H turbocharger The assembly instructions
More informationCyclone High Speed Centering Shaft
TIDLAND WINDING SOLUTIONS Cyclone High Speed Centering Shaft User Manual EN MI 270013883 1 CONTENTS INTRODUCTION 1-1 About these operating instructions... 1-1 SAFETY INFORMATION 2-1 Proper use... 2-2
More informationTurbocharger / A100-L Original assembly instructions English
Assembly Instructions Turbocharger / A100-L Original assembly instructions English This document is valid for the A100-L series: A165-L, A170-L, A175-L, A180-L, A185-L, A190-L Purpose The assembly instructions
More informationMaintenance Manual 3-INCH INTERNAL VALVE F660 SERIES
Maintenance Manual 3-INCH INTERNAL VALVE F660 SERIES REVISION 1.1 03/15/2002 LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical
More information(a) Short-term storage of tubeless wheel assemblies may be stored with the wheel o- ring packing installed between the two halves.
Manual AWBCMM0001-7.2/USA Section 300 External Design (2) Wheels Stored Without Tires Installed (a) Short-term storage of tubeless wheel assemblies may be stored with the wheel o- ring packing installed
More informationFUEL INJECTOR / VAPOR SEPARATOR SEAL KIT, P/N INSTALLATION INSTRUCTIONS
FUEL INJECTOR / VAPOR SEPARATOR SEAL KIT, P/N 500793 INSTALLATION INSTRUCTIONS APPLICATION This kit is designed for use on 009 and newer Evinrude E-TEC 5 30 HP outboards. DO NOT install on any other models.
More informationRail Vehicle Systems ... PC Rev. D (9/22/17) -en... Parts Catalog EPCU
Rail Vehicle Systems...... PC-777661 ( Rev. D (9/22/17) -en...... Parts Catalog Contact address New York Air Brake 748 Starbuck Avenue Phone: +1 315 786 5200 Watertown, NY 13601 Fax: +1 315 786 5676 USA
More informationMaintenance Manual 4½-INCH INTERNAL VALVE F635 SERIES
Maintenance Manual 4½-INCH INTERNAL VALVE F635 SERIES REVISION 1.0 11/01/2004 LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical
More informationH2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT The H2O-C14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to
More informationRail Vehicle Systems ... IP-234. Rev. 10 (3/17/17) -en ... Maintenance and Repair. EP-60 Freight Car Integrated Brake Control System
Rail Vehicle Systems...... IP-234 Rev. 10 (3/17/17) -en...... EP-60 Freight Car Integrated Brake Control System Contact address New York Air Brake 748 Starbuck Avenue Watertown, NY 13601 USA Phone: +1
More informationInput Adjusting Ring Leak Repair Procedure for Meritor MT-14X Series Forward Differential Carriers
Revised 01-16 Technical Bulletin Input Adjusting Ring Leak Repair Procedure for Meritor MT-14X Series Forward Differential Carriers Revised 1 Technical 01- Bulletin 16 Hazard Alert Messages Read and observe
More informationOPERATION AND MAINTENANCE MANUAL
WREN IBT SERIES HYDRAULIC TORQUE WRENCHES IBT SQUARE DRIVE SERIES OPERATION AND MAINTENANCE MANUAL FOR WREN Products: POINT 75, 1IBT, 3IBT, 5IBT, 8IBT, 10IBT, 20IBT, 25IBT, 35IBT, 50IBT SQUARE DRIVE HYDRAULIC
More informationCylinder and Valve: AirHawk II Air Mask
Cylinder and Valve: AirHawk II Air Mask MAINTENANCE AND REPAIR MSA 011 (L) Rev. 0 MSA 2010 Prnt. Spec. 10000005389(I) Mat. 10104218 Doc. 10104218 Parts List Cylinder Replacement Kits Item P/N Description
More informationWalker Loader Bucket OPERATOR S AND PARTS MANUAL
Walker Loader Bucket OPERATOR S AND PARTS MANUAL Please Read and Save These Instructions For Safety, Read all Safety and Operation Instructions Prior To Operating Machine P/N 6690 TABLE OF CONTENTS Introduction
More informationTidland G590 Lug Shaft
TIDLAND WINDING SOLUTIONS Tidland G590 Lug Shaft Operation and Maintenance EN 3" Shaft Diameter MI 746509 1 C CONTENTS INTRODUCTION 1-1 About these operating instructions... 1-1 Product overview... 1-2
More informationBETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR-S SEISMIC SPRING RETURN SERIES PNEUMATIC ACTUATORS
BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR-S SEISMIC SPRING RETURN SERIES PNEUMATIC ACTUATORS PART NUMBER: 102264 REVISION: "C" DATE: November 2000 Page 1 of 11 1.0 INTRODUCTION 1.1
More informationINSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS
INSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual, CA-1, should be read thoroughly prior to pump installation,
More informationTILT ASSIST KIT, P/N INSTALLATION INSTRUCTIONS
TILT ASSIST KIT, P/N 50069 INSTALLATION INSTRUCTIONS APPLICATION This kit is designed for use on the following -cylinder outboards with manual tilt: 00 and newer Evinrude E-TEC 0 HP recreational and 60
More informationTurbocharger / TPL-B Original assembly instructions English
Assembly Instructions Turbocharger / TPL-B Original assembly instructions English This document is valid for the TPL-B series: TPL85-B14/15/16, TPL91-B Purpose The assembly instructions explain how the
More informationLUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type
INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)
More informationSB20G. Large Pressurized Abrasive Blaster Assembly & Operating Instructions
SB20G Large Pressurized Abrasive Blaster Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
More informationMaintenance Manual WATER SUMP CONTROL VALVE F532B
WATER SUMP CONTROL VALVE F532B LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical line in the outer margin of the page. When
More informationService Manual Outline
Service Manual Outline Section 1 - Important Information A - General Information B - Maintenance Section 2 - Removal, Installation and Adjustment A - All Models Section 3 - Sterndrive Unit A - Drive Shaft
More informationGH-BETTIS SERVICE INSTRUCTIONS DISASSEMBLY & REASSEMBLY FOR MODELS HD521-M4, HD721-M4 AND HD731-M4 DOUBLE ACTING SERIES PNEUMATIC ACTUATORS
GH-BETTIS SERVICE INSTRUCTIONS DISASSEMBLY & REASSEMBLY FOR MODELS HD521-M4, HD721-M4 AND HD731-M4 DOUBLE ACTING SERIES PNEUMATIC ACTUATORS WITH HYDRAULIC CONTROL PACKAGE PART NUMBER: SE-023 REVISION:
More informationInstallation. Introduction
Installation MDE-4369 Aviation Tubing Retrofit Kit for Gasboy Q Models Kits M05023K001 & K05023K002 October 2004 Introduction This manual provides installation instructions for Kits M05023K001 & M05023K002
More informationDISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model
More informationOWNER/OPERATOR MANUAL. Airmotor effective dia. in. 2.5
MODELS 282050, 282716 & 283513 AIR OPERATED CHASSIS PUMP SERIES A OWNER/OPERATOR MANUAL SPECIFICATIONS Airmotor effective dia. in. 2.5 Airinlet Material outlet 1/4 NPTF 1/4 NPTF Liquid to Air Pressure
More informationB14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce
More information6722 Rev. A CAPACITY: 22 TON TRUCK AXLE JACK WITH AIR RETURN
CONTENTS: Page Specifications 2 Warning Information Setup Instructions and Operating Instructions 4 Preventative Maintenance, Inspection and Proper Storage 5 Troubleshooting, Owner/User Responsibility
More informationMaintenance Information
80234313 Edition 2 May 2014 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the
More informationHexPro Series Low Profile Wrenches
HexPro Series Low Profile Wrenches Operation and Maintenance Manual Model 2HP 4HP 8HP 14HP 30HP www.torquetoolsinc.com Use the HEXPRO Series Low Profile Wrenches Model 2HP 4HP 8HP 14HP 30HP to install
More informationIBT Series Square Drive Torque Wrenches
IBT Series Square Drive Torque Wrenches Operation and Maintenance Manual Model.75, 1, 3, 5, 8, 10, 20, 25, 35, 50 http://www.torsionx.com Use the IBT Series Square Drive Torque Wrenches Model.75, 1, 3,
More informationSTP-MLD Installation and Owner s Manual
STP-MLD Installation and Owner s Manual 2006 400439001 Rev. 6 Franklin Fueling Systems 3760 Marsh Rd. Madison WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608 838 6433 www.franklinfueling.com
More information3 Inch & 4 Inch Digital Bypass Pressure Control Valves
SM64505 September 2008 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Applicable addition manuals: None Maintenance & Repair Manual 3 Inch & 4 Inch Digital Bypass Pressure Control
More informationModels & Inch & 4 Inch Digital Inline Pressure Control Valves SM64504
SM64504 September 2008 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable addition manuals: None Maintenance & Repair Manual 3 Inch & 4 Inch Digital Inline Pressure
More informationPRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS
PRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS WARNING This manual, and the GENERAL INSTRUCTION MANUAL SRM00046, should be read thoroughly prior to pump installation, operation or maintenance. Manual No. SRM00095
More informationMaintenance Manual. 3-Inch Internal Valve. F660 Series
3-Inch Internal Valve F660 Series LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical line in the outer margin of the page.
More informationSPECIFICATIONS SPECIFICATIONS
4430 and 4450 OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup and Operating Instructions 4 Preventative Maintenance and Troubleshooting 5 4430 Exploded View Drawing and Parts
More informationPOWER PINNER CD HAND WELDER 7300 OPERATOR S MANUAL
POWER PINNER CD HAND WELDER 7300 OPERATOR S MANUAL Copyright: April 7, 2014 Gripnail Corporation Revised: January 25, 2018 An Employee Owned Company 97 Dexter Road East Providence, Rhode Island 02914-2045
More informationPRODUCT SERVICE MANUAL. BK6DHZ(C)-250, 275, 312 and 400 PUMPS
PRODUCT SERVICE MANUAL BK6DHZ(C)-250, 275, 312 and 400 PUMPS WARNING This manual, and the GENERAL INSTRUCTION MANUAL, SRM00046, should be read thoroughly prior to pump installation, operation or maintenance.
More informationJOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION. Lawn Tractors L100, L110, L120, and L130 TM2026 DECEMBER 2002 TECHNICAL MANUAL
2026 December 2002 JOHN DEERE WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION Lawn Tractors L100, L110, L120, and L130 TM2026 DECEMBER 2002 TECHNICAL MANUAL North American Version Litho in U.S.A. Safety
More informationMaintenance Manual 6-INCH INTERNAL VALVE F620 SERIES
Maintenance Manual 6-INCH INTERNAL VALVE F620 SERIES REVISION 1.1 03/15/2002 LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical
More informationInstallation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Cam-Tite Ball Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health and safety...2
More informationB14 AAA FINE FINISH SERIES PUMP OUTFIT
PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationIMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
More informationMod: KLD6-12/35XLAS-N
12/2011 Mod: KLD6-12/35XLAS-N Production code: 1914070 INSTRUCTION MANUAL LOGIC LINE PLUS HOOD Reseller Stamp for Warranty Dear customer, Above all, thank you for choosing our product and we would like
More informationAuto-Flo Air-Assist Automatic Dispensing Valve
Auto-Flo Air-Assist Automatic Dispensing Valve Customer Product Manual Part NORDSON CORPORATION AMHERST, OHIO USA Nordson Corporation welcomes requests for information, comments and inquiries about its
More informationHigh Lift Transmission Jack Max. Capacity: kg (1,000 lbs.)
655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223
More informationINSTRUCTION MANUAL AND PARTS LIST FOR 3SIC AND 4SIC SERIES PUMPS
TM INSTRUCTION MANUAL AND PARTS LIST FOR 3SIC AND 4SIC SERIES PUMPS WARNING This manual, and General Instructions Manual, CA-1 should be read thoroughly prior to pump installation, operation or maintenance.
More informationAudi-Larm TM Audible Alarm: AirHawk II Air Mask
Audi-Larm TM Audible Alarm: AirHawk II Air Mask MAINTENANCE AND REPAIR MSA 011 (L) Rev. 0 MSA 2010 Prnt. Spec. 10000005389(I) Mat. 10104323 Doc. 10104323 REPLACEMENT KITS AND PARTS LIST Item P/N Description
More informationEscape Cylinder and Valve
Escape Cylinder and Valve MAINTENANCE AND REPAIR TAL 1601 (L) Rev. 2 MSA 2016 Prnt. Spec. 10000005389 (I) Mat. 10064389 Doc. 10064389 CYLINDER COMPONENTS Item Part No. Description 818159 5 Minute, Aluminum
More informationINSTRUCTIONS. US Patent Pending HVLP Turbine Guns
INSTRUCTIONS 309317 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. A US Patent Pending HVLP Turbine Guns 10 psi (0.07 MPa,.7 bar) Maximum Inlet
More informationJT8D GEARBOX HOUSING SPLIT LINE INTEGRAL SEAL
JT8D GEARBOX HOUSING SPLIT LINE INTEGRAL SEAL P/N ORIGINAL ISSUE: TITLE PAGE SEPT 25/00 RECORD OF REVISIONS REV NO. Orig 1 2 3 4 REV DATE Jan 17/95 May 28/97 Aug 19/98 Aug 25/99 Sept 25/00 DATE FILED BY
More informationInstallation instructions
Installation instructions Akrapovič System: Evolution and Optional Front Link Pipe Set for the Porsche Cayenne Turbo (type 958) Porsche Cayenne Turbo S (type 958) www.akrapovic.com Installation instructions
More informationDeZURIK " BAW AWWA BUTTERFLY VALVES WITH EPOXY-RETAINED SEAT
DeZURIK 20 144" BAW AWWA BUTTERFLY VALVES WITH EPOXY-RETAINED SEAT Instruction D10373 April 2017 Instructions These instructions provide information about the 20 (250 F2 model only) and the 24-144 BAW
More informationjegs.com. Installation Instructions for Ton Aluminum Floor Jack
Installation Instructions for 80077 3-Ton Aluminum Floor Jack Contents: Specifications Warning Information Setup and Operating Instructions Preventive Maintenance and Troubleshooting Hydraulic Maintenance
More informationOperation and Maintenance Manual http://www.torsionx.eu Use the MaxDrv Series Square Drive Torque Wrench Model.75, 1, 3, 5, 8, 10, 20, 25, 35, 50 to install and remove threaded fasteners requiring precise
More informationHydraulic Transmission Jack, Telescopic
Operating Instructions & Parts Manual Hydraulic Transmission Jack, Telescopic Model 4000 400 (Air Operated) Capacity 000 lbs. 000 lbs. Model 4000 Model 400 U.S. Patent No. 6,02,377! This is the safety
More informationINSTALLATION/OPERATION/MAINTENANCE INSTRUCTIONS FOR ARCHON MODELS WD2010L, WD2010, WD2010H WASHDOWN STATIONS. ARCHON Industries, Inc.
ARCHON Industries, Inc. Washdown Stations Models WD2010L, WD2010, WD2010H Installation / Operation / Maintenance Instructions 1 This manual has been prepared as an aid and guide for personnel involved
More informationK EN R A ugu st Specifications Industrial Engine. M G D (Engine) MGB (Engine)
K EN R 623 0-00 A ugu st 200 6 Specifications 2506-15 Industrial Engine M G A (Engine) MGB (Engine) M G D (Engine) Important Safety Information i01658146 Most accidents that involve product operation,
More informationTECHNICAL PROCEDURE Trailer SuSpenSion, axle, Wheel-end, & Brake SySTemS SuBJeCT: lit no: date: TaBle of ConTenTS important Safety information 2
TECHNICAL PROCEDURE Trailer Suspension, Axle, Wheel-end, & Brake Systems SUBJECT: General Safety Precautions and Information for Technical Procedures LIT NO: DATE: April 2018 TABLE OF CONTENTS Important
More informationBefore equipment use, please read this operation manual carefully. Serial Number: Date Purchased:
Pushed & Geared Trolleys OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use,
More information350 Ton Elevator Links/Link Extensions Operation Manual
TECHNICAL MANUAL 350 Ton Elevator Links/Link Extensions Operation Manual 2005-2015 Texas International Oilfield Tools, LTD. Published by Texas International Oilfield Tools, LTD, Engineering 14620 Henry
More informationViscount I Hydraulic Motor and Displacement Pump
INSTRUCTIONS-PARTS LIST 308 674 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supersedes Rev. B Viscount I Hydraulic Motor and Displacement Pump
More informationWARNING SPECIFICATIONS MODEL # A 1-1/2 TON TRANSMISSION JACK. Manufactured to comply with the ASME PASE-2014 Safety Standard.
MODEL # 791-7180 A 1-1/2 TON TRANSMISSION JACK BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING PROCEDURES, SAFETY S AND MAINTENANCE REQUIREMENTS. It is the
More informationOperating & Maintenance Manual For Steam Conditioning Valve
For Steam Conditioning Valve 1 Table of Contents 1.0 Introduction 3 2.0 Product description 3 3.0 Safety Instruction 4 4.0 Installation and Commissioning 5 5.0 Valve Disassembly 6 6.0 Maintenance 6 7.0
More informationSBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions
SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationAuto-Flo Panel Reinforcement Automatic Dispensing Valve
Auto-Flo Panel Reinforcement Automatic Dispensing Valve Customer Product Manual Part NORDSON CORPORATION AMHERST, OHIO USA Nordson Corporation welcomes requests for information, comments and inquiries
More informationInstallation instructions
Installation instructions Akrapovič Exhaust System Slip-On for the BMW S 1000 RR *505775* EN Revision 1.0 04/2017 www.akrapovic.com www.akrapovic.com Congratulations on purchasing the Akrapovič exhaust
More informationPRODUCT SERVICE MANUAL
PRODUCT SERVICE MANUAL FOR AM322ICX-325AE, 350AN and 400A PUMPS WARNING This Special Instruction Manual and General Instructions Manual, SRM00046, should be read thoroughly prior to pump installation,
More information6602LP CAPACITY: 2 TON LOW RIDER SERVICE JACK
CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup Instructions 4 Operating Instructions, Preventative Maintenance, Inspection and Proper Storage 5 Hydraulic Jack Maintenance Guide and Regular
More informationMaintenance Information
04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More information