RCI2 SERIES RAKE Parts Breakdown

Transcription

1 RCI2 SERIES RAKE Parts Breakdown 03/16/16 1

2 18 RAKE WHEEL S PAGE 10 RAKE ARM S PAGE 6,7 HYDRAULIC S PAGES 8,9 WARNING DECALS PAGES 12,13 2 WHEEL AND HUB S #3 THRU #13 15 PIVOT S PAGE 4,

3 POSITION CLEVIS HITCH (welded hitch clevis) CLEVIS HITCH (cast hitch clevis) JACK 10 SIDE CRANK HUB ASSEMBLY COMPLETE (BRGS, CAP AND SEAL) 2 POSITION MAXIMUM SAFE TOWING DECAL USE WARNING FLASHERS DECAL GREASE SEAL INNER BEARING INNER BEARING RACE OUTER BEARING OUTER BEARING RACE SPINDLE NUT, WASHER, COTTER PIN KIT DUST CAP WHEEL STUD LUG NUT TIRE AND WHEEL ASSEMBLY DURABILT RAKING SYSTEM DECAL DURABILT DECAL (LH rear of frame) MADE IN USA DECAL (RH rear of frame) 1 FOR PAINTED S ADD A LETTER AFTER THE NUMBER FOR THE COLOR R=RED G=GREEN 3

4 9,10,11,12 18,19,20,21 17 WARNING DECALS PAGES 12, ,16 13, ,4 Bushings 2 5,6 4

5 POSITION POSITION PIVOT ASSEMBLY RH (8 & 10 whl all-series, 12 whl before serial ) PIVOT ASSEMBLY RH (12 whl after serial ) 1 PIVOT ASSEMBLY LH (8 & 10 whl all-series, 12 whl before serial ) PIVOT ASSEMBLY LH (12 whl after serial ) PIVOT PIN PIVOT PIN BUSHINGS PIVOT PIN O RINGS PIVOT PIN RETAINING BOLT PIVOT PIN RETAINING NUT INNER WING ANGLE STRUT WIDTH ADJUSTING PIN WIDTH ADJUSTING PIN RETAINER WIDTH ADJUSTING TUBE WING ATTACHMENT PIN WING ATTACHMENT PIN GREASE FITTING WING ATTACHING PIN RETAINING BOLT WING ATTACHMENT PIN RETAINING NUT GREASE FITTING ¼ DRIVE IN GREASE DAILY DECAL OUTER WING ANGLE STRUT WING ANGLE STRUT RETAINING PIN WING ANGLE STRUT ADJUSTING PIN WING ANGLE STRUT ADJUSTING PIN RETAINER 2 FOR PAINTED S ADD A LETTER AFTER THE NUMBER FOR THE COLOR R=RED G=GREEN 5

6

7 POSITION FRONT WHEEL ARM RETAINING PIN FRONT WHEEL ARM RETAINING PIN RETAINER CLIP INDEPENDENT WHEEL ARM RH 3 OR INDEPENDENT WHEEL ARM RH FRONT (10 AND 12 WHEEL ONLY) INDEPENDENT WHEEL ARM RH REAR 1 POSITION WHEEL ARM RETAINING BOLT WHEEL ARM RETAINING BOLT LOCK NUT GREASE FITTING ¼ DRIVE IN GREASE DAILY DECAL 6, 8 OR 10 6, 8 OR 10 8, 10 OR 12 8, 10 OR INDEPENDENT WHEEL ARM LH 3 OR INDEPENDENT WHEEL ARM LH FRONT (10 AND 12 WHEEL ONLY) INDEPENDENT WHEEL ARM LH REAR MAIN ARM RH 8 WHEEL MAIN ARM LH 8 WHEEL MAIN ARM RH 10 WHEEL MAIN ARM LH 10 WHEEL MAIN ARM RH 12 WHEEL MAIN ARM LH 12 WHEEL SINGLE RAKE WHEEL ARM SPRING EYE BOLT EYE BOLT NUT 8, 10 OR 12 10,12 OR 14 20, 24 OR 28 7

8 ,12 MALE COUPLER AND ADAPTER ON END OF HOSES 8

9 POSITION HYDRAUILIC CYLINDER 3X HYDRAULIC CYLINDER REPAIR KIT 3 x HYDRAULIC ELBO 1/2 NPT M, 3/8 JIC FS HYDRAULIC ADAPTER 3/8 NPT M, 3/8 JIC M HYDRAULIC BALL VALVE 3/8 NPT HYDRAULIC ADAPTER ½ NPT M, 3/8 JIC M W/RESTRICTOR HYDRAULIC HOSE ¼ X HYDRAULIC HOSE ¼ X 226 (12 WHEEL RAKE) HYDRAULIC HOSE ¼ X 190 (8 AND 10 WHEEL RAKE) HYDRAULIC HOSE CLAMP ASSEMBLY ¼ DOUBLE HYDRAULIC CROSS 3/8 JIC HYDRAULIC CAP 3/8 JIC HYDRAULIC ADAPTER ½ NPT M, 3/8 JIC M HYDRAULIC MALE QUICK COUPLER (PIONEER) HYDRAULIC CHECK VALVE ASSEMBLY (OPTIONAL) 2 FOR PAINTED S ADD A LETTER AFTER THE NUMBER FOR THE COLOR R=RED G=GREEN 9

10 POSITION RAKE WHEEL HUB COMPLETE OUTER BEARING INNER BEARING 2,3, GREASE SEAL DUST CAP mm RAKE WHEEL ATTACHMENT BOLT 3/8 RAKE WHEEL ATTACHMENT BOLT mm RAKE WHEEL ATTACHMENT LOCK WASHER 3/8 RAKE WHEEL ATTACHMENT LOCK WASHER 6 10mm RAKE WHEEL ATTACHMENT NUT 3/8 RAKE WHEEL ATTACHMENT NUT RAKE WHEEL COMPLETE RH RAKE WHEEL COMPLETE LH RAKE WHEEL TINE RAKE WHEEL TINE CLAMP RAKE WHEEL TINE CLAMP BOLT RAKE WHEEL TINE CLAMP NUT POSITION DURAWHEEL COMPLETE 57 FITS RH & LH DOUBLE RUBBER RAKE TINE WIND GUARD FOR 57 DURAWHEEL (PLASTIC) STEEL WHEEL FRAME 57 DURAWHEEL 10

11 POSITION POSITION R G MOUNT BASE (DESIGNATE COLOR) MOUNT BASE BOLT MOUNT BASE NUT BALL VALVE 3/ ADAPTER 3/8 NPT MALE X 3/8 JIC MALE WITH RESTRICTOR ADAPTER 3/8 NPT MALE X 3/8 JIC MALE R SPLITTER WHEEL ARM (RED) ADAPTER 3/8 NPT MALE X 3/8 JIC FEMALE SWIVEL G SPLITTER WHEEL ARM (GREEN) RAKE WHEEL RH SPLITTER R G WHEEL ARM PIN WHEEL ARM PIN RETAINER BOLT WHEEL ARM PIN RETAINER NUT HYDRAULIC CYLINDER 2 X HYDRAULIC CYLINDER REPAIR KIT 2 CYLINDER CYLINDER PIN CYLINDER PIN RETAINERS RAKE WHEEL LH SPLITTER SPLITTER RAKE WHEEL TINE SPLITTER WHEEL TINE CLAMP SLITTER WHEEL TINE CLAMP BOLT SPLITTER WHEEL TINE CLAMP NUT RAKE WHEEL HUB ASSEMBLY (HUB S SEE PAGE 10) mm RAKE WHEEL ATTACHING BOLT 3/8 RAKE WHEEL ATTACHING BOLT HYDRAULIC HOSE HYDRAULIC HOSE CLAMP ASSEMBLY ¼ DOUBLE 1 PAGE mm RAKE WHEEL ATTACHING NUT 3/8 RAKE WHEEL ATTACHING NUT 12 10mm RAKE WHEEL ATTACHING LOCK WASHER 3/8 RAKE WHEEL ATTACHING LOCK WASHER 12

12 DURAWHEEL SPLITTER WHEEL (located on top of tongue at hitch clevis) POSITION Durawheel rake wheel 38 complete w/ wind guard Steel frame for 38 Durawheel Wind guard 38 Durawheel (plastic) Double rubber rake tooth /8 nut /8 x 1-1/4 bolt (same size bolt holds wheel to hub and tine to wheel) /8 lock washer ALWAYS USE WARNING FLASHERS ON TRACTOR EXCEPT WHEN PROHIBITED BY LAW (located on top of tongue at hitch clevis) MAXIMUM SAFE TOWING SPEED 25 MPH (located on top of frame in front of hydraulic cylinders) PINCH POINT. Keep hands and fingers clear DURABILT INDUSTRIES, LLC AIRPORT ROAD

13 ( RH side of tongue opposite jack) 1. Read and understand the operator s manual. 2. Stop the tractor engine before leaving the operator s platform. 3. Keep riders off the machine. 4. Make certain everyone is clear of machine before starting the tractor engine and operating. 5. Keep all shields in place. 6. Never lubricate, adjust or service the machine with tractor engine running. 7. Wait for all movement to stop before servicing. 8. Keep hands, feet and clothing away from moving parts. 9. Use flashing warning lights when operating on highways except when prohibited by law ( Front of pivot assy. right side up when rake is in working position) STAY CLEAR WHEN OPERATING. Read and understand instruction manual before operating STAY CLEAR OF MACHINE WHILE FOLDING AND WHILE IN OPERATION ( Front of wing adjuster tube left side of pin hole and Underside of wing on triangle plate right side up when folded in transport position)

14 Durabilt Industries, LLC Pocahontas, AR Phone