710-xxxp Propagation & Irrigation Battery Operated Controller
|
|
|
- Archibald French
- 6 years ago
- Views:
Transcription
1 i n s t r u c t i o n m a n u a l 710-xxxp Propagation & Irrigation Battery Operated Controller Features Weekly or cyclical program Four start times per day in weekly mode Station run time from 1 second to 12 hours in 1 second increments Watering schedule 7-day weekly program or cyclical from once a month to once every minute or hour Water budget from -90% to +90% in 10% increments Semi-automatic or manual operation Rain delay up to 30 days Same programming as 510P controller Withstands harsh climatic conditions Completely waterproof Can be mounted on a valve or on valve box wall Available with the DIG R710DC solenoid on 3/4, 1, 1 1/2 and 2 valves Available with rain sensor connection Operates using 1, 9-volt alkaline battery Up to 2 year battery life P P
2 Table of contents Introduction 3 1. About the controllers 3 2. Parts identification 3 3. System components 4 4. Valve or wall mounting Valve mounting Wall mounting 4 5. Installation Valve and solenoid assembly and installation 5 6. Using a sensor 7 7. Battery installation 8 8. Programming 8 9. Programming current time and day of the week Time format (switching between AM/PM and 24 hour) Setting watering time (duration) Programming watering schedule Setting a start time water according to days of week Setting a cyclical or once start time Manual operation Rain Off (shutdown) Budget Sensor operation Irrigation window in the cyclical program mode Flashing low battery warning Constant low battery warning No program Maintenance, troubleshooting and repairs Warranty Technical assistance 20 2 Thank you for purchasing DIG s 710-xxxP propagation controller. This manual describes how to get the 710-xxxP up and running quickly. After reading this manual and having been familiarized with the basic functionality of the controller, this manual can be used as a reference for less common tasks in the future. 1. About the controllers The 710-xxxP battery operated controller employs the latest engineering improvements for better operation. The 710-xxxP single station controller can provide advanced and simple programming features for all types of light commercial, greenhouse and nursery applications. The 710-xxxP controller is powered by 1, 9-volt battery and wrapped in a compact housing design that provides enhanced waterproofing capability. The 710-xxxP controller operates in conjunction with DIG s 2-wire DC solenoid, model R710DC. Adapters are available to attach the solenoid to many brand name valves available on the market. DIG in-line globe valves are also available in sizes 3/4 to 2 with the solenoid preinstalled. 2. Parts Identification 1. Cover 2. Battery compartment cover 3. Controller display 4. Push buttons 5. Wall mount bracket 6. Valve mounting bracket 7. Wall mount 8. Solenoid wires 9. Sensor wires (optional) t y u 3 i q w e r o
3 3. System Components To properly install 710-xxxP propagation and irrigation controller, the following components are needed: 710-xxxP single station controller with R710DC solenoid or with DIG in-line valve assembly Optional valve adapter (see below) VALVE ADAPTER Model P used with RAIN BIRD, DV, PGA, PEB (3/4 and 1 only), GB, EFB-CP, BPE, PESB and ASVF valves (adapter sold separately). Model #P O-ring Model # VALVE OR WALL MOUNTING 4.1 VALVE MOUNTING 1. Press the controller q into the controller valve mounting bracket w. 2. Press the controller with the valve mounting bracket onto the solenoid and arrange the controller in a preferred position (see also pg 6). 4.2 WALL MOUNTING q 1. Attach the mounting plate r on the wall using 3 screws (not included). 2. Press the controller q into the wall mount bracket e. w 3. Press the controller onto the wall mount to secure it. In this situation the valve mounting bracket w is not used. Note: Be aware that the length of the controller connecting cable limits the distance between the controller and the solenoid. q e r 5. INSTALLATION 5.1 Valve and Solenoid Assembly NOTE: Suggested operating pressure: PSI (.7 to 10.5 bar) Use DIG s DC valve assembly or solenoid model R710DC. 1. Shut off the mainline to the valve. 2. Install the DIG valve and latching solenoid assembly or unscrew the conventional solenoid from the valve used and remove the solenoid housing, solenoid stem, plunger, spring, and O-ring (if necessary). 3. Converting SUPERIOR valves: First, remove the SUPERIOR solenoid and O-ring and replace with one O-ring (DIG part #30-492) inside the solenoid thread cavity (this O-ring is included). Install the adapter then, slip the manual handle into the adapter. Attach the solenoid with the plunger and position the handle at a 45 angle towards the valve outlet Additional (see b1-c). This creates Additional system components a manual system components lever, helpful for manual on/off. Firmly tighten the solenoid by hand, but do not over tighten. 4. Converting IRRITROL (HARDIE) valves: Leave Irritrol manual handle in place (not applicable for 205 series). Screw the provided adapter into Irritrol adapter or directly into valve (205 series only). DO NOT use the orange manual handle provided with this installation. Screw the R710 DC solenoid with the plunger into the adapter. 5. Converting RAIN BIRD valves: Unscrew and remove Rain Bird AC solenoid. Install adapter model P into a Rain Bird valve and tighten the adapter with a wrench. Next, install the R710DC latching solenoid directly into the adapter clockwise and hand tight. DO NOT use the adapter with the orange handle provided. a b b1 c Splice the solenoid hot wires (red) to the single station controller color-coded wires (red). Splice the solenoid black wire to the single incoming white wire
4 Use conventional dry-splice waterproof connectors. Leave some slack on each side of the wires so that repairs, if needed, can be carried out easily (see D). NOTE: Subsequent 710 Models (only) will have the solenoids hard wired into the controller eliminating the need for waterproof connectors. 7. Mount the controller see section 4 on page 4 for wall or valve mounting (see e, g, h). 8. After installation is complete, turn on the water supply and pressurize the mainline. The valves will open momentarily and then shut off. Test each valve in manual operation by moving the manual handle from left to right to open and right to left to close. Do this to make sure that the valve is operating correctly (see F). 9. Program the controller (see section 8 on page 11). Sensor E D 6. USING A SENSOR 1. Carefully strip each of the controller s two yellow sensor wires. 2. Select a normally open sensor, or configure the sensor to be normally open. 3. Connect 1 of each yellow wire from the controller to each of the normally open wires from the sensor using waterproof connectors. 4. When the sensor is active, appears on the display and the sensor will override the program when triggered. 5. Do not strip or cut the wire if a sensor is not used. 6. Follow the sensor manufacturer s instructions for calibrating the sensor. 7. Compatible rain sensors: Hunter Mini Click NO and Rain Bird RSD. warning: FAILURE TO USE waterproof connectors will void manufacturer s warranty F G H 6 7
5 7. BATTERY INSTALLATION Rotate the battery compartment cover handle counter clockwise to the 11 o clock position to remove the cover (see drawing). Insert one 9-volt alkaline battery onto the terminal clips and slide the battery into the sleeve. Insert the battery into the battery compartment and reinstall the cover. The controller display appears briefly followed by a water droplet on the lower left side of the display. The droplet will flash momentarily and shut off. When the display flashes 12:00 the controller is ready to be programmed. IMPORTANT: To replace the battery compartment cover, insert the battery compartment cover with the handle in the 11 o clock position and then rotate the cover 1/4 clockwise to avoid breaking the cover guide pin. DIG controllers are programmed with the aid of four buttons: Use to select the desired programming mode Use to lower the value of the selected parameter (e.g. deducts an hour) Use to raise the value of the selected parameter (e.g. adds an hour) Use to select the parameter to be changed (hour, minute, etc.). To implement the changes, the selected parameter must be flashing. If no changes are implemented, the controller will always revert to the main screen. duration days starts M Tu W Th F Sa Su PM 6:00 E now sensor w. open w. close manual rain off 8. PROGRAMMING This section explains the programming features, use of buttons and the steps necessary to assign irrigation schedules. To program the controller use the left button to select the desired programming mode, the right button to make the entry flash and the plus minus buttons to change the value. Note: Only a flashing character can be changed. 8 9
6 9. programming current time and day of the week To enable the controller to operate properly, the current time and current day of the week must first be set. Steps below explain how to set the day and time. Press the hour digit will flash. Use the or, to set the current hour (note: use of AM and PM designations). Press the minutes digit flash, set the current minute using or. Press A flashing arrow will appear under M for Monday. Use the or to move the arrow to current day. Press to proceed to the next step. Note: If the last data entered stops flashing, press the again to resume programming. 10. time format (swtiching between am/pm and 24 hour) The default time format is AM/PM. There is also a 24 hour time format option that can be switched between the two formats. Press several times until appears. Press hour digit will flash. Press the or simultaneously. The clock reading switches from AM/PM to a 24 hour tiime display or vice versa. Note: You can switch the time display format at any step in this section of the programming process. 11. setting watering time (duration) This setting determines the length of time that the valve will remain open. Press until appears. Press, the hour/minute digits flash. Set the desired number of hours by pressing or. Press again, the minute digits flash. Set the desired number of minutes by pressing or. Repeat the same steps for seconds. Press to proceed to the next step. 12. programming watering schedule This setting determines which days the controller will operate. Choose either A. Watering According to the Days of the Week or B. One-time Irrigation or Cyclical Irrigation. Press until appears. Press. A flashing arrow appears at the top of the display, under Monday. At this stage you can set one of two options: a) Watering according to the days of the week, b) One time only watering, cyclical watering in minutes, hours or days. a. Watering according to the days of the week. To select a watering according to the days of the week, move the flashing arrow to the desired day of the week by pressing. Press the. The arrow under the selected day stops flashing, and in a few seconds moves one position to the right, and flashes under the next day of the week. You can select additional days of the week in the same manner. Press to proceed to the next step, or to cancel a scheduled watering day: Press and move the arrow under the selected day. Press the arrow will disappear and the flashing arrow will move one position to the right, and appear at the next day of the week. Cancel additional scheduled irrigation days in the same manner. Press to proceed to the next step. under the selected day, 10 11
7 b. One-time irrigation or cyclical irrigation This option is used to program the controller to operate the irrigation system one time only, for the irrigation period as set in watering time (durations). Press until appears. Press several times (for all the days of the week) until appears, and flashes on the display. Note: In cyclical mode only 1 start time per day is available. Cyclical irrigation This option is used to program the controller to operate the system in a cyclical manner. Once every 1 minute up to 5 minutes, every 5 minutes up to 15 minues, every 15 minutes up to 1 hour, every 1 hour up to 24 hours, and every day up to 30 days. Press until appears. Press several times (to advance all the days of the week) until appears, and flashes on the display. With the display flashing, press or. The number of minutes, hours or days between watering cycles appears on the display. For example if every 15 minutes is selected, your programmed watering duration will activate every 15 minutes during a 24-hour period. (see #19 for irrigation window). For example, if every 30 days appears, watering will take place once every thirty days, for the irrigation period as set in duration. To change the number of days press or. Press to proceed to the next step. 13. SETTING A start time In this step, up to 4 separate irrigation start times can be programmed in the weekly mode (watering according to the days of the week). Press until START I appears. The word OFF (or the last start time entered) appears. Press the word OFF flashes. Press or to set the desired start time hour (note AM and PM). Press the minute will flash. Press or to set the desired start time minute. Press to set START II and repeat the same steps for start times number 2, 3 and 4 as needed. To cancel one of the start times select it by pressing. Press the hour digit will flash. Press the or until the word OFF appears. 14. setting a cyclical or ONCE start time (with option to delay valve start time) This program is used to pre-set the valve start time (only one start time available) and the number of days to delay the valve start time, the number of day(s) to delay option will appear on the display to the right of the irrigation start time above the word days. In this feature 0 days = program starts today; where 1 = program starts tomorrow, etc. (up to 30 days delay). Press until START I appears or the last opening time entered appears on the display. Press. The hours and the AM/PM digits flash. Set the desired opening hour by pressing the or (note: AM and PM designations appear to the left of the hour digits). Press. The minute digits flash. Repeat the same step for setting the minutes and then the number of days to delay between watering cycles. Start time must be later than the current time in order for the cycle to start today (day = 0)
8 15. manual operation This option operates the valve for the defined irrigation period. The valve will automatically close at the end of the irrigation period. Note that the originally programmed irrigation schedule continues to function at the times set. Press until appears. Press to open the valve. The word ON is displayed and a water droplet appears on the lower left side of the display. To close the valve manually before the end of the manual cycle press until ON appears again. Press to close the valve. 16. rain off (shutdown) This option is used to temporarily suspend the controller operation. The irrigation schedule remains stored in the controller memory, but is not implemented until the suspension is canceled. The suspension option disables the valve. In the now mode, press and hold until the rain off icon appears in the lower right corner of the display. To resume automatic operation, repeat the process the icon will disappear. RAIN OFF can be used while a valve has been activated. 17. budget You can extend or shorten the time durations by specifying a percentage increase or decrease. Press until appears, wait until no digit is flashing. Press and simultaneously. 00+% is displayed. Press, the 00 flashes. Press and to increase or decrease the percentage as necessary (in 10% increments from 90% to +90%). +% or % is displayed on now screen when a budget choice is entered. 18. SENSOR OPERATION 1. Press until appears next to SENSOR. 2. Press to activate the sensor in the irrigation program selected. * With the sensor circuit closed (i.e., the sensor detects the existence of a defined program lockout condition) the symbol flashes on the display. In this situation, irrigation will not take place through the valve. 3. Press to disable the sensor. The word OFF appears on the display
9 19. Irrigation window in the cyclical Program mode The irrigation window is an advanced feature which enables cyclical irrigation program operations (see Section B) to take place only during a defined part of the day (window). The irrigation window is defined as a part of a day (up to 23 hours), in the cyclical irrigation mode only. This function is useful when irrigation is only required during the hot hours of the day. For example, open window 9 am, closed window 4 pm. Make sure that appears on the display. 1. Press until appears on the display next to W.OPEN, with the word OFF or last OPEN WINDOW time setting displayed. 2. Press. The word OFF flashes on the display. 3. Press and to set the desired OPEN WINDOW time (pay attention to the AM/PM designation). 4. Press until appears on the display next to W. CLOSE, with the 12 am or the last close window time setting displayed. 5. Press. The 12 am flashes on the display. 6. Press and to set the desired CLOSE WINDOW time (pay attention to the AM/PM designation). 7. Irrigation will not occur until the next window opens. To disable the irrigation window function 1. Press until appears next to OPEN WINDOW, with the last OPEN WINDOW time setting displayed. 2. Press. The irrigation window open time flashes on the display. 3. Press until OFF appears next to. valve in operation A icon will appear. If the flashes, the valve has not opened, the possibilities are: Valve is in short mode. The icon will flash once every 1/2 second (120 times every minute). 20. flashing low battery warning A flashing battery icon appears on the display when the batteries are weak. In this state, a limited amount of energy still remains in the batteries for valve operation, and they should be promptly replaced. Press any button after replacing the batteries to resume irrigation controller activity. Program data will be retained for approximately 20 seconds during battery changing. 21. Constant low battery warning When weakened batteries are not replaced in a timely manner, the battery icon appears constantly. All other display elements disappear and all valves are closed. Replace batteries promptly, then press any button to resume irrigation controller activity. Program data will be retained for approximately 20 seconds during battery changing
10 22. no program During manual irrigation system operation via the irrigation controller, no prog appears on the display, meaning that no irrigation period has been set for the valve. In this case, the irrigation controller does not know when to close the valve. In this situation valve opening is disabled. 23. MAINTENANCE, TROUBLESHOOTING AND REPAIRS Batteries should be removed if the irrigation controller will not be operated for a prolonged period. Under normal usage, batteries (alkaline) will last for a minimum of 1 year to a maximum of 2 years. It is good operating practice to replace old batteries with new ones at the start of the irrigation season. In-line valve recommended operating water pressure range: PSI. In-line valve operating pressure range: PSI. Actuator recommended operating water pressure range: PSI. PROBLEM: In-line valve does not open during automatic operation or during manual operation via irrigation controller CAUSE: Weak battery SOLUTION: Replace battery PROBLEM: No display CAUSE: Weak battery SOLUTION: Replace battery PROBLEM: Valve does not close despite solenoid activation CAUSE: Valve is installed backwards SOLUTION: Reverse valve PROBLEM: In-line valve does not close despite solenoid activation CAUSE: Outlet flow may be too low SOLUTION: Increased flow rate by adding drip emitters or micro sprinkler CAUSE: Solenoid orifice or adapter inlet if used is blocked SOLUTION: Flush and clear port PROBLEM: In-line valve does not fully close CAUSE: Debris stuck in diaphragm SOLUTION: Remove bonnet and diaphragm and clean diaphragm PROBLEM: Actuator does not fully close CAUSE: The actuator widely open SOLUTION: Adjust flow rates by turning the actuator body slowly clockwise 1/4 turn at a time until valve closes 24. WARRANTY DIG CORPORATION warrants these products to be free from defects in material and workmanship for a period of three years from date of purchase. This warranty does not cover damage resulting from accident, misuse, neglect, modification, improper installation or subjection to line pressure in excess of 150 lbs per square inch for inline valves and 90 PSI for actuators. This warranty shall extend only to the original purchaser of the product for use by the purchaser. This warranty shall not cover batteries or any malfunction of the product due to battery failure. The obligation of DIG CORPORATION under this warranty is limited to repairing or replacing at its factory this product which shall be returned to the factory within three years after the original purchase and which on examination is found to contain defects in material and workmanship. DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. Unattended use for prolonged periods without inspection to verify proper operation is beyond the intended use of this product, and any damage resulting from such use shall not be the responsibility of DIG CORPORATION. There are no warranties, which extend beyond the description on the face hereof. In the case of purchase of the product for use other than, for irrigation purposes, DIG CORPORATION hereby disclaims any implied warranties including any warranties of merchantability and fitness for a particular purpose. In the case of the purchase of the product for personal, family or household purposes, DIG CORPORATION disclaims any such warranties to the extent permitted by law. To the extent that any such disclaimer or implied warranties shall be ineffectual, then any implied warranties shall be limited in duration to a period of three years from the date of the original purchase for use by the purchaser. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you
11 In order to obtain performance under this warranty, the unit must be returned to the factory, along with proof of purchase indicating original date of purchase, shipping prepaid, addressed as follows: DIG CORPORATION, 1210 Activity Drive, Vista, CA Repaired or replaced units will be shipped prepaid to the name and address supplied with the unit returned under warranty. Allow four weeks for repairs and shipping time. Repair of damaged units not otherwise within warranty may be refused or done at a reasonable cost or charge at the option of DIG CORPORATION. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. 25. TECHNICAL ASSISTANCE Should you encounter any problem(s) with this product or if you do not understand its many features, please refer to this instruction manual first. If further assistance is required, DIG offers the following customer support: TECHNICAL SERVICE USA DIG s Technical Service Team is available to answer questions in English and Spanish from 8:00 AM to 5:00 PM (PST) Monday-Friday (except holidays) at Questions in English and Spanish can be ed to questions@digcorp.com or faxed to Specification documents and manuals are available for downloading in English and Spanish at Activity Drive Vista, CA , USA dig@digcorp.com DIG CORP Printed in the USA DIG is a Registered Service Mark of DIG Corp. E 20
i n s t r u c t i o n m a n u a l
i n s t r u c t i o n m a n u a l 710-xxxp Propagation & Irrigation Battery Operated Controller Features Weekly or cyclical program Four start times per day in weekly mode Station run time from 1 second
i n s t r u c t i o n m a n u a l
Model 510.xxxP Battery Operated Propagation and Irrigation Controller i n s t r u c t i o n m a n u a l Installation, Programming and Operating Instructions Features Weekly or cyclical program Four start
i n s t r u c t i o n m a n u a l
i n s t r u c t i o n m a n u a l Model 510.xxx and 510.xxxS Single-Station Battery Operated Controller Installation, Programming and Operating Instructions Features Weekly or cyclical program Four start
i n s t r u c t i o n m a n u a l
i n s t r u c t i o n m a n u a l 710 & 740 Series Single and Four Station Battery Operated Controllers Features Weekly or cyclical program Four start times per day in weekly mode Irrigation duration from
i n s t r u c t i o n m a n u a l
i n s t r u c t i o n m a n u a l 8006 Six-Station AC Timer Residential/Light Commercial Independent Program Irrigation Controllers Installation, Programming and Operating Instructions Features Operates
AC Irrigation and Propagation Controllers I Four Station, 5006-I and 5006-IP Six Station
AC Irrigation and Propagation Controllers 5004-I Four Station, 5006-I and 5006-IP Six Station I N S T R U C T I O N M A N U A L Table of contents Introduction 1 1. Specifications 1 2. Controller Mounting
Single, Four & Six Station Battery Operated Controllers 710-XXX ASV PRF-ASV-XXX
Single, Four & Six Station Battery Operated Controllers 710-XXX 740-000 746-000 710-ASV-075 710-PRF-ASV-XXX I N S T R U C T I O N M A N U A L Table of contents Introduction 2 1. About the controllers 2
i n s t r u c t i o n m a n u a l
i n s t r u c t i o n m a n u a l Model 7001 Battery Operated Irrigation Controller with Hose or Pipe Thread Features Weekly or cyclical programming 4 start times per day in weekly program Irrigation duration
Model 2008 I Battery Operated Irrigation Timer with 3/4 in. Anti-Siphon Valve
i n s t r u c t i o n m a n u a l Model 2008 I Battery Operated Irrigation Timer with 3/4 in. Anti-Siphon Valve Features Weekly or cyclical programming 4 start times per day in weekly program Irrigation
INSTRUCTION MANUAL. Model 7001 Battery Operated Irrigation Controller with Hose or Pipe Thread
DIG CORPORATION 3 YEAR WARRANTY DIG CORPORATION warrants these products to be free from defects in material and workmanship for a period of three years from date of purchase. This warranty does not cover
Battery Operated Advanced Computerized Irrigation Controller Installation and Operating Instructions
Battery Operated Advanced Computerized Irrigation Controller Installation and Operating Instructions This handbook provides the installation and operating instructions for the DC-1 and DC-4 controllers.
Two, Four and Six Station Battery Operated Controllers 720A-XXX 740A-XXX 760A-XXX
Two, Four and Six Station Battery Operated Controllers 720A-XXX 740A-XXX 760A-XXX I N S T R U C T I O N M A N U A L TABLE OF CONTENTS INTRODUCTION... 1 1. About the controller... 1 2. Component identification...
Battery Operated Advanced Computerized Irrigation Controller Installation and Operating Instructions
Battery Operated Advanced Computerized Irrigation Controller Installation and Operating Instructions This handbook provides the installation and operating instructions for the DC-1 and DC-4 controllers
12 Outlet Drip Manifold
2 Outlet Drip Manifold I N S T R U C T I O N M A N U A L . TOP 2 Outlet DRIP manifold DIG TOP 2 outlet drip irrigation manifolds are designed to be adapted to any 2 riser, above or below ground. They may
DIG Corporation Irrigation product Specifications
DIG Corporation Irrigation product Specifications SECTION 02810 Part 2 Products IRRIGATION SYSTEMS 2.1 Automatic Irrigation Controller [Light][Solar] Irrigation controllers shall be single, solid-state
Instruction Manual MINI IRRIGATION CONTROLLER.
MINI IRRIGATION CONTROLLER www.krain.com Station Models - Available in 4 OR 6 stations. OUTdoor MODEL - Supplied with 120VAC x 24VAC inbuilt transformer. Optional LEAD with Plug. Instruction Manual Table
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing ROXTERTM Hitch Mounted Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior quality materials and workmanship. With proper
Electrically Operated Advanced Computerized Irrigation Controller
RAN OFF FERTLZE Electrically Operated Advanced Computerized rrigation Controller nstallation and Operating Manual Controller Model 800248 - Operating 1 to 24 valves + Main Valve or Pump Controller Model
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing TONNOSPORT Roll-Up Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship. With proper care, your cover
B to A Solenoid Adapter Kit Installation & Troubleshooting Guide
B to A Solenoid Adapter Kit Installation & Troubleshooting Guide English B to A Solenoid Adapter Kit Thank you for purchasing a Rain Bird B to A Solenoid Adapter Kit. This durable solenoid assembly provides
Rain+Birdt. Simple To Set Timer (SST) Setup & Operation Instructions. English RAIN BIRD ( ) or visit
Rain+Birdt Simple To Set r (SST) Setup & Operation Instructions English Installation...2 Tools and Supplies Needed...2 Step 1. Mount r...2 Step 2. Connect Power...2 Indoor r...2 Outdoor r...2 Step 3. Connect
STC 2P025 Series Solenoid Valve
STC 2P025 Series Solenoid Valve 2P025 Series Solenoid Valve Specifications Valve Model Valve Type Action Cv (Orifice) Operating Pressure Operating Temperature 2P025 2 Way, Normally Closed (NC) Direct Acting
INSTALLATION AND MAINTENANCE GUIDE SF1596 B/E ELECTRONIC LAVATORY FAUCET
INSTALLATION AND MAINTENANCE GUIDE SF1596 B/E ELECTRONIC LAVATORY FAUCET 1 INDEX 1 TECHNICAL DATA 2 PACK CONTENTS 3 PRE-INSTALLATION INFO 4-5 INSTALLATION 6-8 SETTINGS ADJUSTMENT WITH REMOTE CONTROL 9
12 STATION MANUAL CONTROLLER INSTALLATION AND OPERATING GUIDE MODEL HRM-12
Ed Hydro Rain. 12 STATION MANUAL CONTROLLER INSTALLATION AND OPERATING GUIDE MODEL HRM-12 The HRM-12 is a 12 station controller that can be set to water from twenty-four times a day to once every two weeks.
The function of this Dynamic Active Probe has divided into three preferences on the screen main Menus:
1.0 Introduction: This probe is designed to provide an additional help to automotive technicians in trouble shooting of electrical circuits problems in the car. Apart from using the normal multi tester,
Digital Anti-Theft Wall Safe
Operation & Installation Guide 2070AF Manual # M08-0271-000 www.firstalert.com Digital Anti-Theft Wall Safe Manual # M08-0271-000 4 7 8 9 DIGITAL ELECTRONIC S AFE Index / Overview of Your Safe Index Overview
Installation and Operation
Installation and Operation v Installation Procedures Indoor Timer Installation... 2 Connecting the Valves... 2 Connecting a Pump Start Relay... 3 Connecting the Plug-in Transformer... 3 Outdoor Timer Installation...
AGRI-COVERTM SWITCH CONTROL INSTRUCTIONS
AGRI-COVERTM SWITCH CONTROL INSTRUCTIONS Use these instructions in place of the rocker switch and solenoid sections in your roll tarp or ROLTECTM Electric Hopper Conversion instructions. Some installs
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing VANISH Roll-Up Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship. With proper care, your cover
ELECTRONIC FLUSH VALVE FOR URINALS jupiter 2040
ELECTRONIC FLUSH VALVE FOR URINALS jupiter 2040 InstallatIon and maintenance guide 1 index 1 TECHNICAL DATA 2 PACK CONTENTS 3 PRE-INSTALLATION INFO 4-8 INSTALLATION 9 BATTERY REPLACEMENT INSTRUCTIONS 10-11
2060F / 2062F / 2064F
Operation & Installation Guide 060F / 06F / 064F DIGITAL ANTI-THEFT SAFE MANUAL # M08-070-000 Index / Overview of Your Safe INDEX Overview of Your Safe...1 Initial Set Up... Programming a Personal Passcode...
AUTOMATIC SPRINKLER TIMER
AUTOMATIC SPRINKLER TIMER Owner s Manual PRT-4 / PRT-6 For use with standard 24 VAC automatic sprinkler valves. These timers are designed for use in any 110 VAC /60 Hz ±10% AC outlet (240 VAC, 50 HZ for
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing a LOMAX TM Hard Tri-Fold or Professional Series Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship.
Operation & Installation Guide 2074F / 2079F. Manual # M Digital Anti-Theft Drawer Safe. Manual # M
Operation & Installation Guide 07F / 079F Manual # M08-07-000 www.firstalert.com Digital Anti-Theft Drawer Safe Manual # M08-07-000 Index / Overview of Your Safe Index Overview of Your Safe Package contents
LIBERATOR USER MANUAL
LIBERATOR USER MANUAL TABLE OF CONTENTS Specifications... 1 Battery Installation... 3 Components... 4 Basic Functions... 5 Lockout/Ready Mode... 8 Momentary Mode... 8 Constant-On... 9 Cycle Control...
Woolich Racing. Bike Harness Installation Instructions Suzuki Harness Type 4a GSX1300R (Hayabusa)
Woolich Racing Bike Harness Installation Instructions Suzuki Harness Type 4a 2013+ GSX1300R (Hayabusa) 1) Introduction To connect your Woolich Racing product to the ECU ( Engine Control Unit or computer)
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing ACCESS Original Roll-Up Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship. With proper care, your
Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual -
29 September 2005 Dodge Cummins Low Fuel Pressure Alarm Light Kit 1081130-33 1 1999-2005 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130 Red 1081133
IMPROVED BUTTON CONTROLS NEW TOMAHAWK USER MANUAL
NEW IMPROVED BUTTON S TOMAHAWK USER MANUAL MC TABLE OF CONTENTS SPECIFICATIONS Specifications... 1 FL1 STANDARD MAX HIGH MEDIUM LOW Components... 4 Battery Installation... 4 Basic Functions... 5 Lockout/Ready
IRRIGATION CONTROLLER
IRRIGATION CONTROLLER 4 and 6 Station Model INSTRUCTION MANUAL SUITABLE FOR INDOOR USE ONLY OTHERWISE WARRANTY IS VOID N10372 Table Of Contents Features 1 Glossary 2 Programming Instructions Introduction
CMD-4000 SERIES REV. A 4+ FUNCTION REMOTE CONTROL DOOR LATCH OPENER SYSTEM INTRODUCTION
CMD-4000 SERIES REV. A 4+ FUNCTION REMOTE CONTROL DOOR LATCH OPENER SYSTEM INTRODUCTION Thank you for purchasing the CMD-4000 series Remote Control Door Latch Opener System from Dakota Digital, Inc. This,
OPERATOR S MANUAL. 20-bu 3-Point Hitch Material Collection System. LP65048 Supplier ST /07/2017 English. North American Edition Printed in USA
OPERATOR S MANUAL 20-bu 3-Point Hitch Material Collection System LP65048 Supplier ST48289 11/07/2017 English North American Edition Printed in USA Introduction Using Your Operator s Manual Read this entire
INSTRUCTIONS FOR INSTALLING AND OPERATING THE UNIVERSAL AUTOSYNC MODEL ASPSS DUAL COMPRESSOR SEQUENCER CONSOLE S/N 1638 AND ABOVE
COMPRESSOR 1 EMERGENCY SHUTDOWN OFF POWER ON COMP LOADED COM PRESSOR OPERATING HOURS SYSTEM PRESSURE COMPRESSOR 2 EMERGENCY SHUTDOWN OFF POWER ON COMP LOADED COM PRESSOR OPERATING HOURS LEAD/LAG CONTROL
ALEX-TRONIX SMART CLOCK TM. BATTERY POWERED TEMPERATURE BUDGETING CONTROLLER MANUAL Patent Pending A DIVISION OF GNA INDUSTRIES, INC.
ALEX-TRONIX A DIVISION OF GNA INDUSTRIES, INC. SMART CLOCK TM BATTERY POWERED TEMPERATURE BUDGETING CONTROLLER MANUAL Patent Pending M A N U A L INTRODUCTION The Smart Clock is a non-solar battery powered
series USER MANUAL
888 534-5994 4000 series USER MANUAL Contents Here s all the information you need for setting and operating your new Lathem time recorder. Service information is also included in this manual, in case any
Woolich Racing. Bike Harness Installation Instructions Hayabusa Gen 2 (08+)
Woolich Racing Bike Harness Installation Instructions Hayabusa Gen 2 (08+) 1) Introduction To connect your Woolich Racing product to the ECU ( Engine Control Unit or computer) in your bike you need to
2025F / 2072F / 2073F
Operation & Installation Guide F / F / F Manual # M-- www.firstlert.com Digital nti-theft Safe Manual # M-- Index / Overview of Your Safe Index Overview of Your Safe Package contents Overview of Your Safe...
Product Name: Product Description: Product Number: IWG75 Twin Port Twin Port Internal Wastegate Actuator TS-06XX-XXXX ----------------------------------------------------------------------------------------------------------------
The ECLIPSE #9800 & The ECLIPSE #9800WC
Operating and Maintenance Manual Installation of The ECLIPSE #9800 & The ECLIPSE #9800WC The John C. Kupferle Foundry Company 2511 North 9 th Street St. Louis, Missouri 63102, USA Tel: 1-800-231-3990 Tel:
# Traction Control Window Switch
1 INSTRUCTIONS # 82085 Traction Control Window Switch Thank you for choosing products; we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation,
INSTALLATION AND MAINTENANCE GUIDE ELITE SERIES ELECTRONIC LAVATORY FAUCET
INSTALLATION AND MAINTENANCE GUIDE ELITE SERIES ELECTRONIC LAVATORY FAUCET 1 INDEX 1 TECHNICAL DATA 2 PACK CONTENTS 3 PRE-INSTALLATION INFO 4-5 INSTALLATION 6-9 SETTINGS ADJUSTMENT 10 BATTERY REPLACEMENT
Digital Body Weight Scale Model No. EB4074C. Questions or Concerns? (855)
Digital Body Weight Scale Model No. EB4074C Questions or Concerns? (855) 686-3835 support@etekcity.com Thank you for purchasing the Digital Body Weight Scale by Etekcity. This device can help you reach
CA 650 Owner's Manual
Remote Vehicle Control System CA 650 Owner's Manual Vehicle Security and Remote Start System with Two Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System
EZ FILL FAUCET AUTOMATIC DECK MOUNTED FAUCET INSTALLATION AND MAINTENANCE GUIDE
EZ FILL FAUCET AUTOMATIC DECK MOUNTED FAUCET INSTALLATION AND MAINTENANCE GUIDE 05 September 018 TABLE OF CONTENTS PRE-INSTALLATION INFORMATION PRE-INSTALLATION INFORMATION 3 PACK CONTENTS 4 TECHNICAL
2019-ON RAM 1500 INSTALLATION INSTRUCTIONS
2019-ON RAM 1500 INSTALLATION INSTRUCTIONS Thank you for purchasing ROCKSTARTM Splash Guard Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior quality materials and workmanship.
2JZGTE Installation Manual Firmware Version 3.0
2JZGTE Installation Manual Firmware Version 3.0 Warnings: Before proceeding you are obligated to read and agree to the terms and conditions attached to this manual. Misuse of this product may cause injury
RAM 1500, 2019 CLASSIC & 2010-ON 2500/3500 INSTALLATION INSTRUCTIONS
2009-18 RAM 1500, 2019 CLASSIC & 2010-ON 2500/3500 INSTALLATION INSTRUCTIONS Thank you for purchasing ROCKSTARTM Splash Guard Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior
UNIVERSAL CUSTOMIZABLE MUD FLAP INSTALLATION INSTRUCTIONS
UNIVERSAL CUSTOMIZABLE MUD FLAP INSTALLATION INSTRUCTIONS Thank you for purchasing ROCKSTARTM Splash Guard Mud Flaps. Agri-Cover, Inc. proudly manufactured these mud flaps using superior quality materials
INSTALLATION GUIDE. AMP RESEARCH TECH SUPPORT (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST
INSTALLATION GUIDE APPLICATION MODEL YR PART # Dodge Ram Quad Cab 1500 2009 - up 7513-01A Dodge Ram Crew Cab 1500 2009 - up 75138-01A Dodge Ram Crew Cab 2500/3500 2010 - up 75138-01A Dodge Ram Mega Cab
HALLMARK INDUSTRIES INC
Performance Part No. HP. CONVERTIBLE JET PUMP USER S MANUAL GPH of Water @ Total Discharge Pressure of 40 psi Max. Pressure Max suction (shallow well) Max Suction (deep well) Max GPM (@0 head) Max Discharge
INSTRUCTION MANUAL INSTALLATION, OPERATION, AND MAINTENANCE ACTUATOR MANIFOLD
INSTRUCTION MANUAL INSTALLATION, OPERATION, AND MAINTENANCE B-3724M ACTUATOR MANIFOLD MIDLAND MANUFACTURING CORP. 7733 Gross Point Road Skokie, Illinois 60077 Phone (847) 677-0333 FAX (847) 677-0138 WEBSITE
There are two types of installations depending on how the current nitrous oxide system is installed.
INSTRUCTIONS Nitrous Level Gauge (Part #82395) Thank you for choosing products; we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation,
GREEN & GREEN 1000 ELECTRONIC LAVATORY FAUCET. InstallatIon and maintenance guide
GREEN & GREEN 1000 ELECTRONIC LAVATORY FAUCET InstallatIon and maintenance guide INDEX 1 TECHNICAL DATA 2-3 PACK CONTENTS 4 PRE INSTALLATION INFORMATION 5-8 FAUCET INSTALLATION 9-11 SETTINGS ADJUSTMENT
Installation Instructions PowerBoard Automatic Retracting Running Board
Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Dodge Ram 1500 Crew Cab 2009 - Current : 75138-15 Dodge Ram 2500/3500 & HD Crew Cab 2010 - Current : 75138-15
OPERATIONS MANUAL LEVER CHAIN HOIST
OPERATIONS MANUAL LEVER CHAIN HOIST IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this hoist. Retain these instructions
Colt Series C400, C500
Colt Series C400, C500 RP/IS-A-C400/C500 C400 OSY Reduced Pressure Zone Assemblies Reduced Pressure Detector Assemblies Sizes: 2 1 2" 10" (65 250mm) Installation Service Repair Kits Maintenance For other
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing the AlloyCover from WeatherTech. Manufactured with pride using superior quality materials and workmanship. With proper care, your cover
Intelligent Electronic Safe
Operation & Installation Guide 1036616 / 1036617 / 1036618 Intelligent Electronic Safe Please do not keep emergency keys in your safe! MANUAL # M08-0566-155041 Index / Proper Use of Your Safe INDEX Proper
Jeep Wrangler (TJ)
INSTALLATION GUIDE APPLICATION MODEL YR PART # Bestop PART # Jeep Wrangler (TJ) 2003 2006 10-03315-10 751-01 INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 4 4= Experienced TOOLS REQUIRED Safety goggles
REMOTE CENTRAL LOCK. Model: CLRxxx-ULT
REMOTE CENTRAL LOCK Model: CLRxxx-ULT Contents Remote Lock, Remote Unlock, Car Finder, Remote Boot release:, Power Window outoput, Learning Transmitter Codes... page 3 Wiring Diagram... page 4 Introduction,
RSV16 Retro-Fit Cartridge Acorn Controls SV16 Valve Cartridge
ACORN ENGINEERING COMPANY P.O. BOX 2 CITY OF INDUSTRY, CA 1 UNITED STATES OF AMERICA WWW.ACORNENG.COM RSV Retro-Fit Cartridge Acorn Controls SV Valve Cartridge Patented ADA Compliant Ligature and Vandal
Operation & Installation Guide 2087DF / 2092DF. Manual # M DIGITAL WATERPROOF. Manual # M
Operation & Installation Guide DF / DF Manual M-- www.firstalert.com DIGITAL WATERPROOF FIRE Safe Manual M-- L--XZ Index Index Overview of Your Safe... Opening Your Safe for the First Time... Test Locking
INSTALLATION AND MAINTENANCE GUIDE EXTREME WM WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER
INSTALLATION AND MAINTENANCE GUIDE EXTREME WM WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER Extreme WMB Extreme WME Extreme WMLB Extreme WMLE 1 INDEX 1 TECHNICAL DATA 2 PACK CONTENTS 2 OPERATION
INSTALLATION INSTRUCTIONS. Automatic Sensor Retrofit Kit For Urinals and Toilets ZERK-CP Chrome-Plated Cover ZERK-CPM Chrome-Plated Metal Cover
Automatic Sensor Retrofit Kit For Urinals and Toilets ZERK-CP Chrome-Plated Cover ZERK-CPM Chrome-Plated Metal Cover INSTALLATION INSTRUCTIONS FV2001 Page 1 Metroflush Z6200 Series Metroflush Piston-Operated
GREENHOUSE, NURSERY & AG PRODUCT CATALOG
GREENHOUSE, NURSERY & AG PRODUCT CATALOG 1210 Activity Drive Vista, California 92081-8510 800-322-9146 760-727-0914 FAX 760-727-0282 www.digcorp.com Copyright 2010. All Rights Reserved. Printed in USA
CA611 Owners Manual CAUTION!
CA611 Owners Manual CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful
Users Guide for Ac-sync
Problem solved. Users Guide for Ac-sync Thank you for choosing Anywhere Cart! The AC-SYNC is designed to sync, charge and store 1-36 ipads or tablets. Adjustable device divider bays allow fitment of any
D28 SERIES WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER. D28 B D28 E D28 Dual Power B D28 Dual Power E D28 Box D28 Box E
D28 SERIES WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER D28 B D28 E D28 Dual Power B D28 Dual Power E D28 Box D28 Box E 1 INDEX 1 TECHNICAL DATA 2-4 PACK CONTENTS 5 PRE-INSTALLATION INFO 6-11
Installation Instructions HOSS Hardtop Cart Only
Installation Instructions HOSS Hardtop Cart Only Hardtop Organized Storage System Application: Hard Top Storage System Part Number: 42804 www.bestop.com - We re here to help! Visit our web site and click
Series 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA
Series 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA Reduced Pressure Zone Assemblies Reduced Pressure Detector Assemblies Sizes: 2 1 2" 10" (65 250mm) Installation Service Repair Kits Maintenance RP/IS-957/957RPDA
INSTALLATION AND OPERATION INSTRUCTION
INSTALLATION AND OPERATION INSTRUCTION ATi Max 2-1/2-6, 65-150mm Install the ATi Max valve either in the supply or return pipework for the unit. It is recommended that a strainer be installed prior to
Service/Installation Manual Full Wall Slide Systems
Service/Installation Manual Full Wall Slide Systems 7 East 7th Street Mishawaka, IN 65 888-9-57 Fax 57-56-67 www.powergearus.com 8-S079 Rev Page CONTENTS Page Major Components Full Wall Slide System Operation
Digital Body Weight Scale
Digital Body Weight Scale Model No.: EB4410B Questions or Concerns? Please contact us: (855) 686-3835 support@etekcity.com Thank You. Thank you for purchasing the Digital Body Weight Scale by Etekcity.
HANDY GATE ASSEMBLY, INSTALLATION AND OPERATING INSTRUCTIONS
ASSEMBLY, INSTALLATION AND OPERATING INSTRUCTIONS BEFORE INSTALLING OR USING THE, REVIEW THE VEHICLE LOADING LIMITATIONS OUTLINED IN THE VEHICLE OWNER S MANUAL AND THE SAFETY COMPLIANCE CERTIFICATION LABEL
For questions or technical support, 1. Wiring Reference:
Warning: Before proceeding you are obligated to read and agree to the terms and conditions attached to this manual. Misuse of this product may cause injury or death. Incorrect installation may cause damage
Operating Instructions and Parts Manual AHR-50 Auto Rewind Hose Reel
Operating Instructions and Parts Manual AHR-50 Auto Rewind Hose Reel JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-426238 Ph.: 800-274-6848 Revision C 04/2017 www.jettools.com Copyright
Installation Instructions
Installation Instructions IMPORTANT! READ AND UNDERSTAND THESE INSTRUCTIONS FOR SAFETY, INSTALLATION, OPERATION, AND MAINTENANCE. SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE. Tested. Trusted. Guaranteed.
Toyota Supra MKIII Installation Manual Firmware Version 3.1
Toyota Supra MKIII Installation Manual Firmware Version 3.1 Warnings: Before proceeding you are obligated to read and agree to the terms and conditions attached to this manual. Misuse of this product may
WVC. Wireless Valve Controller. Multiple Station Battery Powered Irrigation Controller. Owner s Manual and Installation Instructions
WVC Wireless Valve Controller Multiple Station Battery Powered Irrigation Controller Owner s Manual and Installation Instructions TABLE OF CONTENTS Introduction...1 WVC Components...2 Installing the Battery...3
AUTO-BLiP. User Manual Lotus INTELLIGENT DOWNSHIFTS. Version 1.0
AUTO-BLiP INTELLIGENT DOWNSHIFTS www.auto-blip.com User Manual Lotus Version 1.0 Copyright 2012 Tractive Technology, LLC. All rights reserved. Page 1 WARNING Use of the AUTO-BLiP while driving could lead
Cam Timing Tool 850 all, S/V/C only ipd #
PI-401 04/11 Dedicated to improving vehicle fun, safety & performance Installation Instructions PI401 Cam Timing Tool 850 all, S/V/C70 1998 only ipd #25.0039 SUGGESTED TOOLS 10mm, 12mm, 30mm sockets rachet
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS LEIT-2ET Ambient Light Powered, Weather Based, Wireless Irrigation Control System LEIT- LIGHT ENERGIZED IRRIGATION TECHNOLGY The LEIT-2ET system is a weather-based, wireless irrigation
CA 6550 Owner s Guide
PROFESSIONAL SERIES CA 6550 Owner s Guide 2 Way LCD Vehicle Security and Remote Start System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable
STC 2W Series Solenoid Valves
STC 2W160-500 Series Solenoid Valves 2W160-500 Series Solenoid Valve Specifications Valve Model 2W160-3/8 2W160-1/2 2W200-3/4 2W250-1 2W350-1 1/4 2W400-1 1/2 2W500-2 Valve Type Action 2 Way, Normally Closed
INSTALLATION AND MAINTENANCE GUIDE TUBULAR SERIES WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER
INSTALLATION AND MAINTENANCE GUIDE TUBULAR SERIES WALL MOUNTED ELECTRONIC FAUCET FOR COLD OR PREMIXED WATER Tubular B Tubular E Tubular CB Tubular CE Tubular 2030 B Tubular 2030 E 1 INDEX 1 TECHNICAL DATA
MAC FAUCETS. FA400 Wall Mount Sensor
MAC FAUCETS FA400 Wall Mount Sensor Installation Procedure: Take a moment to view drawings and read special Installation note on page 4 of this manual before proceeding with installation. Connect Faucet
MAC FAUCETS. FA400 Autoluxe Faucets
MAC FAUCETS FA400 Autoluxe Faucets Installation Procedure: Take a moment to view drawings and read special Installation note on page 4 of this manual before proceeding with installation. Connect Faucet
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing the AlloyCover from WeatherTech. Manufactured with pride using superior quality materials and workmanship. With proper care, your cover
Users Manual Certified Series Direct Drive Pump 1-7 LPM
Users Manual Certified Series Direct Drive Pump 1-7 LPM Safety, Operating, Installation, and Maintenance Instructions 600 S 56 th Street #9 Chandler, AZ 85226 Phone: 480-507-6478 Fax: 480-838-2232 www.fogco.com
JET METER INSTRUCTIONS
UNPACKING Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you undamaged. If you do find an item that is broken