Catalog Cuts. for DENTON ISD. Prepared By DENTON ISD DENTON, TEXAS. NoPrjNum. PDF created by Specworks. created 11/01/ :29:06 AM

Transcription

1 Catalog Cuts for DENTON ISD Prepared By DENTON ISD DENTON, TEXAS NoPrjNum created 11/01/ :29:06 AM

2 7800/8200 MORTISE LOCKS

3 7800/8200 Mortise Locks Features SARGENT Mortise Locks (Patent Pending) are designed and constructed with high quality components to provide maximum security, performance and durability. These locks represent over a century of innovation and experience in manufacturing hardware and are the industry s benchmark for mortise locks: Strong - Durable - Flexible Innovative and Secure Outside front plate 1/16" (1.6mm) brass, bronze or stainless steel. Adjustable for door bevels from flat to 1/8" (3mm) in 2" (51mm) Green Catch Screw for Multi-function Locks only Cylinder retainer-two prong grip meets Security Grade 1 Extra strong 7/64" (3mm) steel case for improved impact resistance 3/4" (19mm) projection stainless steel one-piece latchbolt, reversible without opening case. Anti-friction piece is securely staked in place for quiet operation and prevents scratching of strike plate Non-handed stainless steel auxiliary deadlatch 6-pin solid brass cylinder standard; multiple keying systems available Heavy gauge corrosion resistant parts provide security, reliability, durability and longevity All trim designs through-bolted. Spring load spindles automatically adjust for door thickness Inside front full 1/8" (3mm) cold rolled steel holds lock securely in door 8237 LNJ Shown Features Maximum Strength & Durability Exceeds ANSI A156.13, Series 1000, Operational Grade 1 and Security Grade 1 with all standard trims Meets and exceeds ASTM F b paragraph 6.2 detention impact level 1 for deadbolt functions, level 3 for latchbolt only functions 12 gauge (.109) steel case and cap 1/8 (.125) cold-rolled steel inside front holds lock securely in door Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life 3/4 stainless steel latchbolt. One piece construction to offer 1 total bearing surface against the strike Stainless steel hubs available One-piece hardened stainless steel deadbolt with 1 (25mm) projection Exceeds 8 times the ANSI/BHMA A Grade 1 standard for cycle testing! 10 Year mechanical warranty. No service required to maintain warranty Maximum Flexibility Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles 12 Standard architectural grade finishes, including new US15 Satin Nickel Multi-functional lockbody makes it easy to change functions in the field! 58 functions including 4 electrical functions and 4 Profile/keypad functions. The most in the industry for a broad range of applications! Versatile. Offered for door thicknesses ranging from 1-3/8 (35mm) to 6 (152mm) Heavy duty hubs and spring cartridge for superior strength and cycle life Solid brass, bronze or stainless steel levers. ADA compliant. Full latch retraction at 30 for ease of operation. Available with vandalism deterrent trim and/or secure fastener options for high abuse conditions UL Listed (10C and UBC 7-2, 1997) for use on fire doors up to 4 x10 and double door applications Available with push/pull trim. Perfect for hospital applications SARGENT uses engineered solutions and flexible manufacturing processes to accommodate special applications Innovation First in the industry to offer a multi-functional lockbody that embodies 9 functions in 1 lockbody! 18 new functions, for a total of 58 to meet virtually every specification Easy operation. Only 30º of lever rotation required to retract latchbolt Lever springs contained inside of the lock case for easier installation Unique spring design. Provides longer lock life, no lever sag and simple installation SARGENT s revolutionary SARGuard available. This antimicrobial silver-based finish coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. EPA and NSF approved and FDA listed Broad offering of electro-mechanical configurations offer higher security for the most demanding access/egress control applications featuring ElectroLynx quick connectors Security Torx and spanner screws Classroom and hospital security functions available Multiple security trim options available: Free-wheeling, security escutcheon and anti-vandal pull trim (patent pending) Security key systems available (V-10, Signature, Keso, Keso F1, & XC) 8/15/05 2 An ASSA ABLOY Group company

4 8200 Mortise Locks Levers with Rose Designs Lever designs C, J, L and P have lever returns within 1/2" (13mm) or less of door face and meet ADA Compliance for national codes Lever designs are available with all standard rose and escutcheon designs (Does not include Coastal Series) A Lever Design P Lever Design Lever: A-Solid forged or cast Must specify hand when ordering 2-15/16" (51mm) 5" (127mm) 1-15/16" (49mm) Lever: P-Solid forged or cast 5-1/2" (140mm) 2-1/2" (67mm) 5/16" (8mm) B Lever Design Lever: B-Solid forged or cast 5" (127mm) W Lever Design Lever: W-Solid bar stock 4-1/2" (114mm) 2-5/8" (67mm) 1-5/8" (41mm) 2-1/2" (64mm) 2-1/16" (52mm) E Lever Design Lever: E-Solid forged or cast 4-1/2" (114mm) L Rose Design Rose: L-Heavy wrought 2-1/2" (64mm) 2" (51mm) 3-1/2" (89mm) 5/16" (8mm) F Lever Design Lever: F-Solid forged or cast 4-1/2" (114mm) O Rose Design Rose: O-Heavy wrought 2-3/4" (67mm) 1-15/16" (49mm) 2-3/4" (67mm) 5/16" (8mm) J Lever Design Lever: J-Solid bar stock 5-1/4" (133mm) LN Rose Design Rose: LN-Heavy wrought 2-13/16" (71mm) 5/16" (8mm) 2" (51mm) 5/16" (8mm) L Lever Design Lever: L-Solid forged or cast 2-3/8" (60mm) 5" (127mm) 5/16" (8mm) E Rose Design Rose: E-Heavy wrought 3-1/16" (78mm) 5/16" (8mm) NOTE: All lever height (+/- 1/16") measurements represent total distance from door face. An ASSA ABLOY Group company 5 8/15/05

5 Features Mortise Locksets ML2000 Series Certification/Compliance ANSI Meets A Series 1000, Operational and Security Grade 1. Meets A117.1 Accessibility Code. Federal Meets FF-H-106C. UL /ULC-UL10C Positive Pressure All locks listed for A label and lesser class doors, 4' (122cm) x 10' (305cm) single or 8' (244cm) x 10' (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns, return to within 1 /2" (13mm) of door face. Finishes BHMA 605 BHMA 606 BHMA 611 BHMA 612 BHMA 613 BHMA 625 BHMA 626 BHMA 629 BHMA 630 Bright Brass HS Satin Brass HS Bright Bronze HS Satin Bronze HS Dark Oxidized Satin Bronze, oil rubbed HS Bright Chromium Plated HS Satin Chromium Plated HS Bright Stainless Steel Satin Stainless Steel VR Armored front conceals lock mounting screws and one-piece heavy gauge steel front Patent Pending latchtail enables easy handing changes 1" throw, one-piece deadbolt meets security Grade 1 Heavy gauge internal parts provide security, reliability, and durability Heavy duty 3 /4" throw latchbolt with stainless steel insert provides positive secure latching HS VR Indicates ML2000HS availability. Indicates available in Vandal Resistant Trim. ML2000.4

6 Trim Designs Mortise Locksets ML2000 Series Newport Complies with codes requiring lever to return to within 1 /2" (13mm) of door face. Brass, bronze or stainless steel NSA Lever: Cast Rose: Wrought Door thickness: 1 3 /8" (35mm), 1 3 /4" (44mm), 2 1 /4" (57mm) NSB Lever: Cast Rose: Cast Door thickness: 1 3 /8" (35mm), 1 3 /4" (44mm), 2 1 /4" (57mm) 2-1/4 (57) 2-5/8 (67) 4-13/16 (122) NSM Lever: Cast Escutcheon: Wrought Optional: Plug only to show; master ring Door thickness: 1 3 /8" (35mm), 1 3 /4" (44mm), 2 1 /4" (57mm) 7-1/2 (190) 2-1/4 (57) 4-13/16 (122) 2-5/8 (67) ML

7 90 Series Surface Overhead Door Holders/Stops 90 Series Heavy-Duty Glynn-Johnson 90 series holders and stops are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation. These versatile units can be used in conjunction with most surface-applied door closers. The provided templates allow for variable mounting positions, ranging from 85º to 110º Hold-Open/Stop angle. These templates are designed for installation in almost all types of doors, including doors with conventional butt-type hinges or specialty hinges. Four Models: 90H Series Hold-Open Model 90S Series Stop-Only Model 90F Series Friction Hold-Open Model 90SE Series Special Stop-Only Model Five Sizes: Simple Standardized Each model is available in five sizes Three Options: J Angle Jamb Bracket SHIM Blade Stop Shim Kits SOC Pin-in-Socket Security Screw Package Unmatched Convenience: Non-Handed Improved Compatibility with Door Closers Single-Acting Doors Interior/Exterior Applications Durable Easy to Install Improved Corrosion Resistance Function Conversion Kits Available 14 Materials and Finishes: In 300 series Stainless Steel, Brass and Steel substrates, these models are available in the largest selection of finishes in the industry. Stainless Steel models offer the highest resistance to corrosion. Available in the following finishes: Finish Description US3 Polished Brass US4 Satin Brass US10 Satin Bronze US10B Oil Rubbed Bronze US32 Polished Stainless Steel US32D Satin Stainless Steel SP4 Powder Coat Brass SP10 Powder Coat Bronze SP28 Powder Coat Aluminum SP313 Powder Coat Dark Bronze SPBLK Powder Coat Black 652 Chrome-like Coating Models Glynn-Johnson 90 series door holders and stops provide long-lasting protection for doors, frames and hardware. All models incorporate a heavy-duty channel/slide-arm design and offset jamb bracket. This unique design allows for simple field modification of functions, should user requirements change. 90H Series Hold-Open (Suffix H) Hold-Open models provide a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. The Hold-Open function can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel. This knob engages the Hold-Open mechanism, allowing the door to be held open at a predetermined position ranging from 85º to 110º. When the knob is flipped over, it acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using a phillips screwdriver to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located on the top of the slider in the channel. 90S Series Stop-Only (Suffix S) When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors. 90F Series Friction Hold-Open (Suffix F) Friction Hold-Open models are ideal for patient room doors, wardrobe and closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension can be adjusted through the top of the channel using an allen wrench. The friction tension adjustment is located on the top of the slider in the channel.

8 100 Series Concealed Overhead Door Holders/Stops Materials and Finishes: In Heavy Gauge Brass or 300 Series Stainless Steel, these models offer the broadest range of finishes in the industry, complementing any design and offering the highest resistance to corrosion. Available in the following finishes: 100 Series Heavy-Duty Glynn-Johnson offers a complete line of overhead door holders and stops, accommodating virtually all openings with solutions for even the most complex door control problems. These concealed holders and stops provide the most attractive and reliable heavy-duty door control available. Glynn-Johnson 100 series holders and stops provide the most reliable and versatile concealed overhead door control. They are designed for installation on virtually all types of doors mounted on conventional type butt hinges, pivots, continuous hinges, swing clear hinges and numerous other specialty hinges. When used in conjunction with many surface-applied door closers, 100 series holders and stops provide the most effective control for entrance doors and vestibule doors of all types, as well as heavy or often used interior doors. Templates provided allow for variable mounting positions, ranging from of opening. Five Models: 100H Series Hold-Open Model 100HP Series Internal Hold-Open Model 100F Series Friction Hold-Open Model 100S Series Stop-Only Model 100SE Series Special Stop-Only Model Six Sizes: Each model comes in six sizes. Simple Standardized Three Options: ADJ Adjustable Jamb Bracket CJ Jamb Bracket for use with LCN5030 Closer SOC Pin-in-Socket Security Screw Package Unmatched Convenience: Non-handed Improved Compatibility with Door Closers Single/Double-Acting Doors Interior/Exterior Applications Reduced Door Prep Durable Improved Corrosion Resistance Function Conversion Kits are Available. Finishes US3 US4 US10 US10B US32 US32D SP4 SP10 SP28 SP313 SPBLK Models Description Polished Brass Satin Brass Satin Bronze Oil Rubbed Bronze Polished Stainless Steel Satin Stainless Steel Powder Coat Brass Powder Coat Bronze Powder Coat Aluminum Powder Coat Dark Bronze Powder Coat Black These models provide a wide range of optional features, and are ideal for use on entrance and vestibule doors, large doors, doors opened frequently, or doors subject to abuse. These models are also furnished with an offset-style jamb bracket. Designed for heavy-duty applications, 100 series models will provide long-lasting protection to doors, frames, hinges, related hardware and surrounding walls or obstructions. 100H Series Hold-Open (Suffix H) The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door. 100HP Series Internal Hold-Open These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep. The 100HP have a preset Hold-Open force that is not adjustable. The Hold-Open feature is not selectable in these units, so the doors are always held open. 18

9 FULL MORTISE HINGES - 5 KNUCKLE PLAIN BEARING LOW FREQUENCY STANDARD WEIGHT For use on Medium Weight Doors with Low Frequency Usage, not intended for use with door closing devices. 5PB1 Steel with steel pin 5PB1 Stainless Steel with stainless steel pin (630 finish) Hinges tested to ANSI - A Dimensions & tolerances conform to ANSI - A Packed with wood and machine screws. Size (Inches) Size (MM) Gauge 4.5 x x BALL BEARING MEDIUM FREQUENCY STANDARD WEIGHT For use on Standard Weight Doors with Medium Frequency Usage 5BB1 Steel with steel pin 5BB1 Stainless Steel with stainless steel pin (630 finish only) Non-Removable Pin suffix NRP Hinges tested to ANSI - A Dimensions & tolerances conform to ANSI - A BB1 Steel description conforms to ANSI - A BB1 Stainless description conforms to ANSI A5112. Packed with wood and machine screws. Size (Inches) Size (MM) Gauge 4.5 x x BALL BEARING MEDIUM FREQUENCY STANDARD WEIGHT SECURITY STUDS Two studs hold leaves secure when hinge is closed. 5BB1SH Steel with steel pin 5BB1SH Stainless Steel with stainless steel pin (630 finish only) Hinges tested to ANSI - A Dimensions & tolerances conform to ANSI - A BB1SH Steel description conforms to ANSI - A BB1SH Stainless description conforms to ANSI A5112. Packed with wood and machine screws. Size (Inches) Size (MM) Gauge 4.5 x x J6

10 FULL MORTISE HINGES - 5 KNUCKLE 4 BALL BEARING HIGH FREQUENCY HEAVY WEIGHT For use on Heavy Weight Doors or High Frequency Usage 5BB1HW Steel with steel pin 5BB1HW Stainless Steel with stainless steel pin (630 finish only) Non-Removable Pin suffix NRP (4.5 x 4.5 only) Hinges tested to ANSI - A Dimensions & tolerances conform to ANSI - A BB1HW Steel description conforms to ANSI - A BB1HW Stainless description conforms to ANSI A5111. Packed with wood and machine screws. Size (Inches) Size (MM) Gauge 4.5 x x x x BALL BEARING MEDIUM FREQUENCY STANDARD WEIGHT SWING CLEAR Designed to completely clear the opening when door is opened 90 degrees. Pins and tips are reversible. 5BB1SC 5BB1SC Steel with steel pin Stainless Steel with stainless steel pin (630 finish only) Non-Removable Pin suffix NRP Hinges tested to ANSI A8122. Dimensions & tolerances conform to ANSI - A BB1SC Steel Description conforms to ANSI - A BB1SC Stainless Description conforms to ANSI - A5121. Packed with flat head wood and machine screws. Size (Inches) Size (MM) Gauge J7

11 Automatic Flush Bolts - Metal Doors FB30 Series for Metal Doors Fully Automatic inactive door is latched when active door closes, bolts retract when active door is opened. Low Actuation Forces Top Bolt Has No Spring Tension. UL Listed for Fire Doors. Fits standard ANSI A115.4 Door Frame Preparations. Non-handed. Models with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. Finishes: US3, US4, US10, US10B, US32, US32D. Finished Cover Plates permit finish changes in stock or at job site. Bolts have 3/4" throw with a 7/8" vertical adjustment. Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Meets ANSI A156.3 Type 25. Optional Dust Proof Strikes DP1 or DP2, prevents dirt build-up assuring full engagement of bottom bolt. Optional rod lengths available for top bolt for non-fire rated openings 18", 24", 36" and 48". FB31P Pair Top and Bottom Bolts Both bolts are nonhanded, but are not identical. The top bolt has no spring tension, resulting in lower actuation force with a smoother operation. FB32 Top Bolt with Auxiliary Fire Latch FB32 combination includes FB31T Top Bolt with auxiliary fire latch. Provides a fire-listed application without a bottom bolt meaning no floor prep and strike. The auxiliary fire latch, mounted in the door edge, releases under extremely high temperatures to keep the doors in alignment during a fire. FB33 Top Bolt with Auxiliary Fire Latch and Retrofit Plate FB33 used to update existing flush bolt installations with auxiliary fire latch eliminating bottom bolt and floor strike. FB33 consists of FB31T Top Bolt, auxiliary Fire Latch and Filler plate to cover existing cutout when bottom bolt is removed. FB31T Top Bolt Only FB31B Bottom Bolt Only UL Listed 3 hours on 8'0" x 10'0" Opening UL Listed 3 hours on 8'0" x 8'0" Opening UL Listed 3 hours on 8'0" x 8'0" Opening Dimensions: Body Size: 1" Wide x 6-3/4" Long x 2" Deep Guide Size: 1" Wide x 1-27/32" Long x 27/32" High x 3/32" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep Filler Plate Size: 1" Wide x 6-3/4" Long x 3/32" Thick A1

12 Automatic Flush Bolts - Wood Doors FB40 Series for Wood Doors Fully Automatic inactive door is latched when active door closes, bolts retract when active door is opened. Low Actuation Forces Top Bolt Has No Spring Tension. UL Listed for Fire Doors. Non-handed. Models with Auxiliary Fire Latch eliminates the Bottom Bolt and is UL Listed for Fire Doors. Finishes: US3, US4, US10, US10B, US32, US32D. Finished Cover Plates permit finish changes in stock or at job site. Bolts have 3/4" throw with a 7/8" vertical adjustment. Meets ANSI A156.3 Type 25. Optional Dust Proof Strikes DP1 or DP2, prevents dirt build-up assuring full engagement of bottom bolt. FB41P Pair Top and Bottom Bolts Both bolts are non-handed, but are not identical. The top bolt has no spring tension, resulting in lower actuation force with a smoother operation. FB42 Top Bolt with Auxiliary Fire Latch FB42 combination includes FB41T Top Bolt with auxiliary fire latch. Provides a fire-listed application without a bottom bolt meaning no floor prep for strike. The auxiliary fire latch, mounted in the door edge, releases under extremely high temperatures to keep the doors in alignment during a fire. FB41T Top Bolt Only FB41B Bottom Bolt Only UL Listed 90 minutes on 8'0" x 8'0" Opening UL Listed 20 minutes on 8'0" x 8'0" Opening Dimensions: Body Size: 1" Wide x 8-1/2" Long x 2" Deep Guide Size: 1" Wide x 6" Long x 1/8" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep A2

13 Constant Latching Flush Bolts - Metal Doors FB50 Series for Metal Doors Constant Latching inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. Low Actuation Forces. UL Listed for Fire Doors. Fits standard ANSI A115.4 Door and Frame Preparations. Non-handed. Models with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. Finishes: US3, US4, US10, US10B, US32, US32D. Finished Cover Plates permit finish changes in stock or at job site. Bolts have 3/4" throw with a 7/8" vertical adjustment. Meets ANSI A156.3 Type 27. Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional Dust Proof Strikes DP1 or DP2, prevents dirt build-up assuring full engagement of bottom bolt. Optional rod lengths available for top bolt for non-fire rated openings 18", 24", 36" and 48". FB51P Pair Top and Bottom Bolts FB51P combines FB51T constant latching top bolt with FB31B automatic bottom bolt. Non-handed. FB52 Top Bolt with Auxiliary Fire Latch FB52 combination includes FB51T Top Bolt with auxiliary fire latch. Provides a fire-listed application without a bottom bolt meaning no floor prep for strike. The auxiliary fire latch, mounted in the door edge, releases under extremely high temperatures to keep the doors in alignment during a fire. FB53 Top Bolt with Auxiliary Fire Latch and Retrofit Plate FB53 used to update existing flush bolt installations with auxiliary fire latch eliminating bottom bolt and floor strike. FB53 consists of FB51T top bolt, auxiliary fire latch and filler plate to cover existing cutout when bottom bolt is removed. FB51T Top Bolt Only UL Listed 3 hours on 8'0" x 10'0" Opening. UL Listed 3 hours on 8'0" x 8'0" Opening. UL Listed 3 hours on 8'0" x 8'0" Opening. Dimensions: Body Size: 1" Wide x 6-3/4" Long x 2" Deep Guide Size: 1" Wide x 1-27/32" Long x 11/16" High x 3/32" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3 4" Long x 3-1/4" Deep Filler Plate Size: 1" Wide x 6-3/4" Long x 3/32" Thick A3

14 Constant Latching Flush Bolts - Wood Doors FB60 Series for Wood Doors Constant Latching inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when door closes. Low Actuation Forces. UL Listed for Fire Doors. Non-handed. Models with Auxiliary Fire Latch eliminates the bottom bolt and is UL Listed for Fire Doors. Finishes: US3, US4, US10, US10B, US32, US32D. Finished Cover Plates permit finish changes in stock or at job site. Bolts have 3/4" throw with a 7/8" vertical adjustment. Meets ANSI A156.3 Type 27. Optional Dust Proof Strikes DP1 or DP2, prevents dirt build-up assuring full engagement of bottom bolt. FB61P Pair Top and Bottom Bolts FB61P combines FB61T constant latching top bolt with FB41B bottom bolt. FB62 Top Bolt with Auxiliary Fire Latch FB62 combination includes FB61T top bolt with Auxiliary Fire Latch. Provides a fire-listed application without a bottom bolt meaning no floor prep for strike. The Auxiliary Fire Latch, mounted in the door edge, releases under extremely high temperatures to keep the doors in alignment during a fire. FB61T Top Bolt Only UL Listed 90 minutes on 8'0" x 8'0" Opening UL Listed 20 minutes on 8'0" x 8'0" Opening Dimensions: Body Size: 1" Wide x 8-1/2" Long x 2" Deep Guide Size: 1" Wide x 6" Long x 1/8" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 1/16" Thick Rub Plate Size: 1-1/4" Wide x 1-11/16" Long x 3/64" Thick Auxiliary Fire Latch Size: 1" Wide x 1-3/4" Long x 3-1/4" Deep A4

15 Manual Flush Bolts - Metal Doors FB458, FB458N and FB0458N Series for Metal Doors When the active door is opened, the lever can be moved to the up position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the down position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. FB458 UL Listed for Fire Doors. FB458N and FB0458N not UL Listed for Fire Doors. FB0458N features 1/4" radius corners on body. Non-handed. Brass Finishes: B3, B4, B5, B10, B10B, B14, B15, B15A, B26, B26D. Bolt tip is 1/2" diameter. Bolts have 3/4" throw with a bolt backset of 3/4". Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Meets ANSI/BHMA A156.16, L Optional Dust Proof Strikes prevents dirt build-up assuring full engagement of bottom bolt. Optional Rod Lengths available for FB458: 6", 9", 18" and 24". Optional Rod Lengths available for FB458N and FB0458N: 6", 9", 18", 24", 30", 36" and 48". FB458 Top or Bottom Bolt FB458N Top or Bottom Bolt FB0458N Top or Bottom Bolt UL Listed 3 hours on 8'0" x 10'0" Opening Dimensions: Body Size: 1" Wide x 6-3/4" Long x 1-1/8" Deep Guide Size: 1" Wide x 2" Long x 5/64" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick A8

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36 IVES Customer Service: FAX

37 Floor Door Stop & Automatic Holder FS495 Features: Automatic door holders ideal for heavy-traffic situations that require a simple, Hold-Open device. Cast brass construction. Holds door 3-3/4" from wall. Recommended installation is holder on door and strike on wall. Holder position on door is adjustable. Holder is tapered to prevent child riding. Meets ANSI/BHMA , L11291 for brass. Finishes: US3, US4, US10, US10B, US26, US26D. FS496 Features: Cast brass construction. For door to floor clearances of 3/8" maximum. Meets ANSI/BHMA , L11301 for brass. Finishes: US3, US4, US10, US10B, US26, US26D. FS497 Features: Cast brass construction. For door to floor clearances of 1" maximum. Meets ANSI/BHMA , L11301 for brass. Finishes: US3, US4, US10, US10B, US26, US26D. D10

38

39 80 Series Exit Devices 8800 Series Rim Exit Device SARGENT Strike 1 5/32" 29mm Standard strike Surface applied Single Door 3 11/16" 94mm (8800) 641 Strike ( ) 649 Strike Double Door with Mullion 3/4" 19mm 1/4" 6mm Trim 649 Strike Mullion Double Door 8800 x 980 Mullion Specifications For Doors Mounting Chassis Cover Chassis Wood or metal. 1 3/4" (44.5mm) thick standard. Available on order for doors up to 2 1/4" (57mm) thick. See minimum stile width requirements this page Supplied standard with wood and machine screws. Available on order with thru bolts and mortise nuts Cold drawn brass, bronze or stainless steel Nonferrous alloy Hand Handed functions: 16, 28, 62, 63, 66 Non-handed functions: 04, 06, 10, 13, 15, 40, 43, 44, 46 73, 74, 75, 76, 77, 78 Dogging Feature Allen-type dogging furnished standard. Available with cylinder dogging (16-prefix) Latchbolt Stainless steel, 3/4" throw Strike 641 standard. For alternate strikes, see Strike Section Fire Exit Hardware See chart page 1 Trim See Trim Designs section Electric Functions See Product Systems Manual Minimum Stile Width Backset with FLW, MAL, Strike 5 8" (16mm) Stop and STS Trim PTB Trim ET Trim Single Door " (70mm) 4" (102mm) 4 1 2" (114mm) 4" (102mm) " (57mm) 3 3 4" (95mm) 4 1 2" (114mm) 4" (102mm) 642 2" (51mm) 3 1 2" (89mm) 4" (102mm) 4" (102mm) " (70mm) 4 1 8" (108mm) 4 1 2" (114mm) 4" (102mm) Backset from FLW, MAL, Strike C L of Mullion and STS Trim PTB Trim ET Trim Double Door x 980 Mullion /8" (52mm) 4 1 8" (108mm) 4 1 2" (114mm) "(103mm) Double Door x Mullion " (76mm) 4 1 8" (108mm) 4 1 2" (114mm) 4" (102mm) Trim 641 Strike 980 Mullion 2/1/99 22 An ASSA ABLOY Group company

40 80 Series Exit Devices Trim Designs SARGENT ET Lever Controls 3 9/16" MAX* 90mm ETA (handed) ETB 3 1/2" 89mm 13/16" 21mm 3 1/8" 79mm 13/16" 21mm 8 8 1/16" 1/16 205mm 4 1/2" 114mm 4 5/8" 117mm 1 13/16" 46mm 13/16" 21mm ETE ETF *Projection varies by lever design. 2.5" (63mm) projection with L Lever) 3" 76mm 13/16" 21mm 3 1/4" 83mm 13/16" 21mm Can be used with all SARGENT 80 Series exit devices. Easy operating lever handle allows convenient one hand operation. Not available in 32, 32D. Lever available in 32, 32D as option add. *All levers are brass or bronze. Stainless steel is available, consult factory. 4" 102mm 4" 102mm ETJ (Solid) ETL ETP 2 3/4" 70mm 13/16" 21mm 1/2" 13mm 4 11/16" 119mm 2 3/8" 60mm 13/16" 21mm 1/2" 13mm 4 1/2" 114mm 3" 76mm 13/16" 21mm 5/16" 8mm 4 15/16" 125mm ETW (solid) Pulls 3" 76mm 13/16" 21mm 2-3/4" " (102mm) 4" (102mm) 3-1/2" (89mm) 4" 102mm 1-3/4" 10" (254mm) 18" (457mm) 10" (254mm) 2/1/99 30 An ASSA ABLOY Group company 90 1" 1" Dia. (19mm) 1" Dia. (25mm) 3/4" Dia. (19mm)

41 80 Series Exit Devices Accessories Mullions and Coordinators SARGENT Removable Mullion 980 Extruded Aluminum (prime coat) 980A Aluminum (US28) Consists of: Mullion 511 Top Retainer 502 Bottom Retainer 96" (2438mm) stock size up to 120" (3000mm) size avail. Soffit Door 25/32" 20mm /2" 63mm 1 1/2" 38mm 1 1/2" 38mm 1" 25mm 1 1/4" 32mm 2 1/2" 64mm 3" 76mm An ASSA ABLOY Group company Adapter for Narrow Transom Bars Required when soffit is 1 1/4" (32mm) to 2" (51mm) wide. 19/32" 15mm Top Retainer Mullion Body 650A Removable Mullion The 650A Mullion assembly consists of: Mullion Retainer Top Retainer Bottom Retainer 651 Stabilizer 96" (2438mm) stock size Up to 120" (3000mm) size available Prepped for (2) 658 strikes (included) Finishes: US28 Aluminum Anodized (Clear) 313AN Aluminum to match 10B Weather Stripping Retainer Mullion (96" maximum) For Top Retainer "x 3" Channel Iron. Malleable iron top and bottom retainers. Standard length 96" (2438mm). Lengths from 97" to 120" (3000mm) are shipped less label Top and bottom retainer pack. Bottom Retainer /3488 Door Coordinators Prevents active door from closing before inactive door Meets Federal Specification FF-H-106a Type 836. Cast bronze with rubber rollers U.L. Labeled when used with Fire Exit Hardware 3487 (6 3/4" length; 171mm) for pairs of doors equipped with outside astragal 3488 (8 5/8" length; 219mm) for pairs of doors equipped with inside and outside astragals. Both include bracket and wear plate Packed with wood and machine screws. Finishes: 10, 26D 3497 Carry Open Bar For use with door coordinator. Aids in opening active door when inactive door is opened, and protects astragal and overlapping strike. Cast bronze. Packed with wear plate, wood and machine screws. Finishes: 10, 26D L980 Lockable Mullion Aluminum Prime Coat Used for non fire rated applications, exterior openings 96" (2438mm) stock size 120" (3000mm) available All cylinder prefixes available #41 mortise cylinder L980A Lockable Mullion Anodized aluminum Non fire rated applications only 96" (2438mm) stock size 120" (3000mm) available All cylinder prefixes available #41 mortise cylinder 12-L980 Lockable Mullion Steel Fire rated for 8'0" x 8'0" (2438mm x 2438mm) paired openings 96" (2438mm) stock size 120" (3000mm) available All cylinder prefixes available #41 mortise cylinder EL980 Electric Lockable Mullion Steel For use with monitor or electric strikes Quick-Connect wiring supplied 96" (2438mm) stock size 120" (3000mm) available All cylinder prefixes available Not available in 12- prefix #46 mortise cylinder Mullion Accessories RK980 Latchbolt assembly retrofit kit with top and bottom retainers for 980 mullion Wall Mount Kit Wall Mount Kit for L Wall Mount Kit for 12-L Wall Mount Kit for EL980 Retainer Packs Product # Description Top Ret. Pack for L Bottom Ret. pack for L Top Ret. Pack for 12-L Bottom Ret. pack for 12-L Top Ret. Pack for EL /1/99

42 80 Series Exit Devices General Information SARGENT Cylinder Chart for Exit Devices - 6 pin PTB, STS, Function MAL, FLL, Auxiliary 12-/Reg. ET 822 FLW Control Cover Dimensions and Touchbar Projections Narrow Wide Door Thickness 1 3/4" 2 1/4" 1 3/4" 1 3/4" 2 1/4" 1 3/4" 44.5mm 57mm 44.5mm 44.5mm 57mm 44.5mm 8304/ / / / / LP/LR/LS N/A SP/PP/PR N/A WD MD WD8613/WD MD8613/MD SP/PP/PR N/A 8706/ / / / / / /*44 34/* /* / / *34/46 *34/ *41/34 *43/ *Inside Cylinder An ASSA ABLOY Group company 8 5/16" 211mm Neutral 1 1/16" 27mm 3" 77mm 3" 76mm 2 5/16" 59mm 1 7/16" 37mm 2 5/8" 67mm 2 1/8" 54mm Depressed 8 3/8" 213mm NOTES: 1. For 16- prefix hardware, a 41 inside cylinder is used with blocking ring For 19- prefix touchbar projection is 2 9/16" (65mm) 3. Removable core and 70 prefix require special cylinder blocking rings ET control prefix Auxiliary controls 4. Less cylinder SARGENT supplies standard blocking rings. Specify if using competitor cylinders 35 2/1/99

43 CYLINDERS, KEYS AND KEY CONTROL Small Format Interchangeable Core Cylinders for Schlage Locksets Small Format Core Only Number Mechanism pin Everest B Family restricted keyway core, uncombinated pin Everest B Family restricted keyway core, combinated pin Best keyway core, uncombinated pin Best keyway core, uncombinated Notes 1. Available 606 and 626 finish only. 2. Suffix keyway, e.g B235, AB, etc. 3. Proper authorization required for Everest cores. Order control keys separately and available in Best A, D, E, F, G, H, J, K, L and M keyways. Suffix B to keyway letter, e.g. AB, DB, etc. 1/4-28 Bolts IC Housings for Bored Deadlocks, Less Core Lockset Series Description Number Specify Finish BC100-Series B600-Series Outside B , 609, 612, 613, 625, 626 Inside B See Note Below Outside B , 606, 609, 612, 613, 625, 626 Inside B See Note Below Tailpieces not included. Specify finish of B snap-on faceplate ordered separately for inside of BC162 and B

44 CYLINDERS, KEYS AND KEY CONTROL Small Format Interchangeable Core Cylinders for Exit Devices, Aluminum Doors, etc. Interchangeable Core Rim Cylinders for Exit Devices Number Core Mechanism Everest restricted keyway core Keyed construction core Disposable construction core Less core Available 605, 606, 612, 613, 625 and 626 finish. Cylinders for Adams Rite MS and 4700 Series, Lori 4500 Series and Corbin Russwin DL3000 Series. Number Core Type Everest restricted core Disposable constr. core Keyed constr. core Housing less core K Adams Rite MS Cam Furnished with compression ring, spring and 7 /16 blocking ring. These cylinders include set screw pack B for Adams Rite locks. Cylinders for Adams Rite 4070 Series Deadlocks Number Core Type Everest restricted core Disposable constr. core Keyed constr. core Housing less core B Adams Rite 4070 Cam Furnished with compression ring, spring and 1 /4 blocking ring Notes 1. Available 605, 606, 612, 613, 625, and 626 finish. Cores furnished 606 and 626 only. 2. All cylinders are 1 3 /8 long. 19

45 Auxiliary Hardware and General Information KEYED REMOVABLE MULLION Keyed Removable Mullion makes removal faster and easier by a single operation of the mortise cylinder. Mullions provide single door performance and security on double door applications. Once the mullion is removed, large equipment or furniture can freely pass through the opening. The unit will self lock when re-installed, without use of the cylinder key. TWO ALUMINUM MULLIONS Strike Mullion Door Device 5654 Prepared for two 264 or 299 strikes with weatherstripping Prepared and furnished with one 1408 double door strike. Note: Specify device less strike. Fitting Cover Strike Furnished with Device Anchors Top Fitting Set Screw Hex Wrench (Furnished) 1 /4 (6mm) - 20 Flat Head Machine Screws 3 /8 (10mm) - 16 Bolts Bottom Fitting Hex Wrench (Furnished) Sizes 7 2 (2184mm), 8 2 (2489mm), 10 2 (3099mm). Finishes US4 (brass anodized), US10 (bronze anodized), US28 (aluminum anodized) or 313AN (dark bronze anodized). 154 Stabilizer Set A two-piece interlocking unit. One piece mounts on the mullion with the top mounting hole 5 13 /16 (148mm) below the centerline of the strike; the other piece mounts on the door. Shims are provided to adjust for misalignment between the door and mullion. The set maintains integrity between the door and mullion to prevent vandalism and to ensure contact between the device and strike as the doors expand and contract with temperature changes. This new lock assembly is available on Von Duprin s standard and fire labeled steel mullions, and can be purchased separately for retrofit on existing steel mullion applications. Sizes include 7 2 (2184mm), 8 2 (2489mm) and 10 2 (3099mm). To order, specify: 1. Model number KR165\4, KR4954, KR9854, K9954 or Retrofit Kit KR54, KR54-F. MT54 Storage Mount MT54 is a set of floor and wall brackets that provide convenient storage of the keyed removable mullion when removed from the opening. To order, specify: 1. MT54 Furnished standard on aluminum mullions; optional 1/8 (3mm) for steel and all blank mullions. 29 /32 (23mm) Angle Plate Used with narrow transom frames. The plate attaches to the transom to extend the surface area needed to mount the mullion. Must be ordered separately (specify mullion type). Angle Plate 1 /4 (6mm) /4 (16mm) B.H.M.S. 1 /16 (2mm) Weatherstripping Standard Edging For Narrow Transoms À, À, À, y Edging with Weatherstripping 19 /32 ÀÀ,, ÀÀÀ,,, ÀÀ,, yy 1 9 /32 (33mm) Mullion Portion Adjustable Angle Plate 2 1 /2 (64mm) 7 /8 (22mm) 1 /4 (6mm) 13/32 (10mm) 1 1 /4 (32mm) 15 /16 (24mm) 1 1 /2 (38mm) 19 /32 (15mm) Door Portion 1 1 /4 (32mm) 7 /8 (22mm) 5 /8 (16mm) 1 /4 (6mm) Weatherstripping retards cold air from blowing between doors and mullion. It also serves as a silencer when the door is closed against the mullion. The silicone treated weatherstrip pile is bonded to a polypropylene backing. A slide-in molding houses the weatherstripping, covers mounting screws of the strike and extends to both the top and bottom of the mullion. 11

46 Auxiliary Hardware and General Information REMOVABLE MULLIONS Mullions provide single door performance in double door openings with rim devices. Mullions are easily removed by loosening bottom set screw and removing top fitting cover. The top mullion fitting is attached to the frame and is concealed by the fitting cover. Mullions are shipped presized, with mounting screws and prepared for strikes. Strikes are not included except where indicated. To order, specify: 1. Model number. 2. Height of opening. 3. Finish. 4. Handing as required. 5. Center line deviation (refer to device template for standard centerline). 6. Strikes, when required, should be ordered with device. Stock Hollow Metal Applications Devices mounted to cover ANSI 161 cutouts are higher than the standard mullion strike location. Consult the factory for special strike preparation or order a blank mullion. Blank Mullions Furnished without strike preparation and without fittings or stabilizers. Used to mount devices at a strike height different from the standard mullion preparation. Note: 9954 blank mullion is furnished less UL label. SIX STEEL MULLIONS Door Electric and Monitor Strikes Fitting Cover Strike Furnished with Device Anchors Mullion Standard Doors Strike Device Top Fitting Set Screw Hex Wrench (Furnished) 1/4 (6mm) 20 Flat Head Machine Screws Fittings shown for 4754, 4854 and /8 (10mm) 16 Bolts Bottom Fitting Hex Wrench (Furnished) 9854/9954 Fitting (used top and bottom) Includes an electric cable for transferring power from frame to strikes. The cable has five wires to a twistapart plug that is connected to a mating socket through a hole in the top fitting. For use with all Von Duprin panic exit rim devices Prepared for two 4263 monitor strikes. 4854/9854 Using one electric strike 4854 Prepared for one 299 and one 6111 electric strike. Indicate handing for electric strike. 4854/9854 Using one electric strike 299 strike RHR door shown active LHR door shown inactive 4954 Prepared for two 264 or 299 strikes. For use with all Von Duprin panic rim devices. Note: specify strike choice with device Prepared for one 499-F and one 6111 electric strike. Indicate handing for electric strike UL fire label mullion for 90 minute openings up to 8 8 (2438mm 2438mm). This mullion is not easily removed due to special fittings. Fire Doors 9954 UL fire label mullion for up to 3 hour openings up to 8 8 (2438mm 2438mm) using Von Duprin fire exit rim devices. Must be used with two 268 (for 88-F) or two 499F (for 22-F, 98-F, 99-F) strikes. This mullion is not easily removed due to special fittings Prepared for two 1606 strikes. Sizes 4754, 4854, 4954, (2184mm), 8 2 (2489mm), 10 2 (3099mm). 9854/ (2209mm), 8 (2438mm), 10 3 (3124mm) (no UL label on 10 (3048mm). Finishes SP28 (sprayed aluminum), SP313 (sprayed dark bronze) or sprayed black Electric strike 10

47 98/99 Rim Exit Device 299 Strike 98 and 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (Special Dogging), -2 (Double Cylinder) or SS (Signal Switch). See Opposite page for available outside trim and device functions. Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs consult template). The 98/99 devices are available in the following finishes: US3, US4, US10, US26, US26D, US28, 313AN, 315AN and US32D for the 98 device only. See page 52 for component finishes and the inside cover for finish chips. Specifications Device Functions Device ships EO/DT/NL. Field selectable. For TP,K,or L remove NL drive screw from device Device Lengths 3 2 4" to 3 (711mm to 914 mm) Door Size " to 4 (864 mm to 1219 mm) Door Size Strikes 299 Dull Black Optional Strikes see page 39 Dogging Feature Hex key dogging standard Dogging Options CD Cylinder Dogging see page 48 SD Special Center Case Dogging see page 48 LD Less Dogging see page 48 Electric Options LX Latchbolt Monitor Switch see page 42 RX Pushpad Monitor Switch see page 42 RX2 Double Pushpad Monitor Switch see page 42 E Electric Locking & Unlocking see page 44 EL Electric Latch Retraction see page 43 SS Signal Switch see page 43 CX Chexit Delayed Exit see page 45 ALK Alarm Exit Kit see page 42 Miscellaneous Options PN Pneumatic Latch Retraction see page 48-2 Double Cylinder see page 48 GBK Glass Bead Kit see page 49 Fasteners & Includes 1 ³ ₄" (19mm) 2 ¹ ₄" (57mm) Wood & Metal Doors Sex Bolts (SNB) Optional SNB available for device, see next page for quantities Latch Bolt Device Centerline from Finished Floor Center Case Dimensions Mechanism Case Dimensions Projection Deadlocking, ³ ₄" (19mm) throw 39 ¹³ ₁₆" (1011 mm) 39 ¹¹ ₁₆" (1008 mm) with Mullion 8" x 2 ³ ₄" x 2 ³ ₈" (203mm x 70mm x 60mm) 2 ¹ ₄" x 2 ¹ ₄" (57mm x 57mm) Pushbar Neutral 3 ¹³ ₁₆" (97 mm) Pushbar Depressed 3 ¹ ₁₆" (78 mm) See page 53 for How to Order specification Ingersoll-Rand. May be copied for use with specification submittal.

48 98/99 Rim Exit Device Standard Trim Exit only Dummy Trim Night Latch Night Latch Pull when Dogged Key Retracts Latchbolt Key Retracts Latchbolt Optional Pull Required Product Description Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Optional Trim (See pages 32 34) Optional #425 Sex Bolt Quantity for Device 98EO 98DT 98NL 98NL-OP 99EO 99DT 99NL 99NL-OP 990DT 990NL-R/V 110NL-MD 110NL-WD 3" x 14³ ₁₆" x ³ ₃₂" 3" x 14³ ₁₆" x ³ ₃₂" (76x360x2mm) (76x360x2mm) 5¹ ₂" (140mm) 5¹ ₂" (140mm) 2" (51mm) 2" (51mm) Rim Rim x990eo x991k-dt x991k-nl x992eo x992l-dt x992l-nl x994eo x994l-dt x994l-nl x996eo x996l-dt x996l-nl x696dt x696nl x697dt x697nl Lever Lever Night Latch Lever Blank Escutcheon Lever Dummy Trim Key Locks & Unlocks Key Retracts Latchbolt Always operable Pull when Dogged (No Cylinder) Product Description Trim Description Escutcheon Plate Size Pull Center to Center Projection ANSI Function Cylinder Type Optional Trim (See pages 32 34) 98L 98L-NL 98L-BE 98L-DT 99L 99L-NL 99L-BE 99L-DT 996L-R/V 996L-NL-R/V 996L-BE-R/V 996L-DT-R/V 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" (70x273x21mm) (70x273x21mm) (70x273x21mm) (70x273x21mm) 2⁷ ₈" (73mm) 2⁷ ₈" (73mm) 2⁷ ₈" (73mm) 2⁷ ₈" (73mm) Rim Rim x992l x992l-nl x992l-be x992l-dt x994l x994l-nl x994l-be x994l-dt Optional #425 Sex Bolt Quantity for Device For optional trims and functions see pages

49 33A/35A Rim Device 1439 Roller 33A and 35A rim devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Fits doors stiles as narrow as 1³ ₄" (44mm). Features Nonhanded Field sizeable ³ ₄" (19mm) throw molydag coated latch bolt Eight popular finishes Hex key dogging Latch bolt deadlocking One piece center case cover Strikes and Fasteners Device is furnished standard with 1439 roller strike in dull black finish. For strike dimensions and optional strike information, refer to page 19. Sex bolts are furnished standard for mounting on 1³ ₄" (44mm) and 2¹ ₄" (57mm) thick doors. Device Options Cylinder dogging, page 25. Electric latch retraction, page 22. Request to exit switch, page 21. Latch bolt monitoring switch, page 21. Signal switch, page 22. Dummy pushpad 25. Glass bead kit, page 25. Dimensions Pushpad height to finished floor Pushpad projection neutral depressed Center case Device length Short 3' (914mm) Long 4' (1219mm) 39 ¹³ ₁₆" (1011mm) at center 3¹³ ₁₆" (97mm) 3¹ ₁₆" (78mm) NOTE: For specific device applications, see device templates or consult factory. 8³ ₁₆" x 2¹³ ₃₂" x 1⁹ ₁₆" (208mm x 62mm x 40mm) 2' 6" to 3' (762mm to 914mm) door size 3' 1" to 4' (940mm to 1219mm) door size To Order, Specify: 1. Product description number from opposite page. 2. Size 4' (for door sizes 3' 1" to 4'). Size 3' (for door sizes 2' 6" to 3'), shipped standard. 3. Door thickness if other than standard 1³ ₄". 4. Finish, see page Handing, LHR or RHR. Required on SS, L or 386NL functions, only. See page 26. For How-To-Order Information on all devices, see page Ingersoll-Rand. May be copied for use with specification submittal.

50 33A/35A Rim Device Trim Exit Only Pull when dogged Key retracts Key retracts Key locks latch bolt latch bolt lever (Pull required) (#06 lever standard) Product Description Trim Description Base Size Grip Size Projection ANSI Function Cylinder Type 33A-EO 33A-DT 33A-NL 33A-NL-OP 33A-L 1,2,3,4,5 35A-EO 35A-DT 35A-NL 35A-NL-OP 35A-L 1,2,3,4,5 386DT 386NL L 7¹⁵ ₃₂"h x 1⁵ ₈"w 7¹⁵ ₃₂"h x 1⁵ ₈"w 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 8¹ ₂"h x 4⁵ ₁₆"w 8¹ ₂"h x 4⁵ ₁₆"w 4¹ ₂" 2⁷ ₁₆" 2⁷ ₁₆" 1" 3" Rim Rim 1¹ ₄" Mortise Straight Cam Key retracts latch bolt Key retracts latch bolt Key locks thumbturn Key locks thumbturn (Pull required) Product Description Trim Description Base Size Grip Size Projection ANSI Function Cylinder Type 33A-NL-OP x 550 DT 33A-NL-OP x Ives 8190 Pull 33A-TL 1,2,4,5 33A-TL x Ives 8190 Pull 1,2,4,5 35A-NL-OP x 550 DT 35A-NL-OP x Ives 8190 Pull 35A-TL 1,2,4,5 35A-TL x Ives 8190 Pull 1,2,4,5 388 x x IVES 8190 Pull 360T 360T x Ives 8190 Pull 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 10" 10" Suggested 10" Suggested 2⁵ ₈" 3¹ ₄" 1¹³ ₁₆" 3¹ ₄" Rim Rim 1¹ ₄" Mortise 1¹ ₄" Mortise Straight Cam Straight Cam Two #425 sex bolts are furnished standard for end case mounting. When exit only (EO) is used, two #325 are furnished for mounting center case. 1 If no cylinder is required specify BE blank escutcheon, trim always operable; example 33A-L-BE. 2 NL function is available by changing orientation of mortise cylinder cam. 3 Matching dummy trim is available, order 360L-DT trim. 4 Wood door applications require the 33A-WDA door cover plate. 5 Cylinder collar required for 1¹ ₂" cylinders. 5

51 33 and 35 Options SIGNAL SWITCH SS LATCH BOLT MONITORING LX EMERGENCY EXIT ONLY PUSH TO OPEN AND SOUND ALARM Monitors pushpad and latch bolt The SS feature is used to signal the unauthorized use of an opening. These devices are equipped with two internal SPDT switches. One switch monitors both the touch bar and the latch bolt assembly, making the latch bolt tamper resistant, for positive security. An additional SPDT switch is connected to the 1 1 /4 (32mm) mortise master keyable cylinder for alarm bypass. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. A continuous current electric transfer must be used for transferring power from the frame to the door. Electrical Ratings: Each switch rated 0.5 Amp. 24 VDC To order, specify: 1. Use prefix SS, example SS33NL-TP. 2. Finish, see page 19 (touch pad finish is US32D only). 3. Handing LHR or RHR. 4. Size 3 or 4 (914mm or 1219mm). Unauthorized use of this opening will activate the local horn. The key switch permits inhibiting this system for authorized entry. The LX feature is used to signal the use of an opening. These devices are equipped with one internal SPDT switch which monitors the latch bolt. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. A continuous current electric transfer must be used for transferring power from the frame to the door. Note: The LX switch option should not be used to control a load, but as a signalling switch (5.0 amps. maximum). Electrical Ratings: 0.5 Amp., 24 VDC To order, specify: 1. Use prefix LX, example LX33EO. POPULAR SS APPLICATION Horn L1900F Magnetic Switch Power Supply PS861 Key Switch (exterior) SS903 Electric Feed-through Hinge 15

52 33 and 35 Accessories SIGNAL SWITCH TRIM SS-333 The SS-333 outside trim contains a SPDT switch for monitoring the operation of the outside push button. This switch may be used as a monitoring device or as an alarm inhibit for passage through a monitored door without causing an alarm. This trim is designed for use on aluminum or hollow metal doors. The wiring in aluminum doors must be routed through the door using the stile and top rail. An electric feed-through hinge may be used to transfer power from the frame to the door. The SS-333 trim is available for use with 33 rim or 3327 surface mounted vertical rod devices. Not recommended for NL function. Cylinder not included. Electrical Ratings: 0.5 Amps. 24 VDC To order, specify: 1. SS-333, R (rim) or V (vertical rod). 2. Finish, see page Handing, see page 22. CYLINDER DOGGING CD Cylinder dogging is available on all 33/35 devices to replace the standard hex key dogging. Unit requires a standard 1 1 /4 (32mm) mortise cylinder. To order, specify: 1. Use prefix CD, example CD33NL-TP. ELECTRICAL POWER TRANSFER The EPT provides a means to transfer power from the frame to the door stile in EL33/ /4 (44mm) thick door applications; up to 5 (127mm) butt hinges 180 opening, 3 /4 (19mm) offset privots 180 opening, 5 1 /2 (140mm) butt hinges 130 opening, and 6 (152mm) butt hinges 110 opening. When the door is closed, the unit is concealed and tamper resistant. Two models are available, EPT-2 (two 18 gauge wires) and EPT-10 (ten 24 gauge wires). UL Fire Listed for use with listed rim, and vertical rod fire devices with electric latch retraction feature. Dimensions Housing Conductors Rating /4 1 1 /2 (229mm 32mm 38mm) Two 18 AWG., ten 24 AWG EPT-2, 2 Amps. at 24 VDC, 16 Amp. maximum surge EPT-10, 2 Amp. at 24 VDC To order, specify: 1. EPT-2 or EPT Finish, SP28 (sprayed aluminum) or SP313 (sprayed duranodic). CYLINDER DOGGING KIT CDK For field conversions, a cylinder dogging conversion kit is available. Order: 33/99CDK or 35/98CDK, specify finish. HEX KEY DOGGING KIT HDK For field conversion, a hex key dogging conversion kit is available. Order: 33/99HDK or 35/98HDK, specify finish. 16

53 98/99 Optional Trim Knob and Thumbpiece Trim Knob Knob Night Latch Knob Blank Knob Dummy Trim Thumbpiece Thumbpiece Key Locks Key Retracts Latchbolt Escutcheon Pull when Dogged Key Locks Blank Escutcheon & Unlocks Alwaya Operable & Unlocks Always Operable (No Cylinder) (No Cylinder) Trim Description 991K 991K-NL 991K-BE 991K-DT 990TP 990TP-BE Escutcheon Plate Size 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" 2³ ₄" x 10³ ₄" x ²⁷ ₃₂" (70x273x21mm) (70x273x21mm) (70x273x21mm) (70x273x21mm) (70x273x21mm) (70x273x21mm) Pull Center to Center Projection ANSI Function Cylinder Type Rim or Vertical Rod Device Mortise Lock Device #425 SNB optional-hmd Req. WD w/o SLM Pkg. #825 SNB Req. WD w/o SLM Pkg. F Rim device ONLY #425 SNB Req. w/ 499F 5¹ ₂" (140mm) 5¹ ₂" (140mm) 3¹ ₄" (83mm) 3¹ ₄" (83mm) 3¹ ₄" (83mm) 3¹ ₄" (83mm) 2" (51mm) 2" (51mm) Rim Rim Rim 1¹ ₄" Mortise 1¹ ₄" Mortise 1¹ ₄" Mortise Lever Design Options #01 #02 #03 #05 #06 Standard #07 #12 #16 #17 #18 Handed Ingersoll-Rand. May be copied for use with specification submittal.

54 98/99 Trim Selection BREAKAWAY LEVER TRIM Breakaway Lever Trim Series 994L will significantly reduce damage from vandalism and abuse, while helping meet ADA-mandated accessibility standards. The patented Breakaway trim is available for Von Duprin Series 98 and 99 exit devices and can be installed on existing 992L lever trim prep for retrofit applications. Lever trim, mandated on public buildings since January 26, 1992, is vulnerable to vandalism and abuse that can cause the lever or internal trim parts to break, rendering the door inoperable and necessitating costly, recurring repairs. The Breakaway design allows the lever to break away and drop into a down position when abused, discouraging further abuse and protecting its internal parts. Further, it can be easily reset to its operating position by a simple uplift motion. When unlocked, the unit operates as a normal lever trim. When locked, the lever feels locked but when more than 35 pounds of torque are applied, the lever breaks away and travels to a 90-degree down position. To prevent further damage to internal trim parts or to the exit device, an easily replaced shear pin breaks at 65 to 75 pounds of torque. Series 994L trim features a smooth precise operation and a flip cam design to allow easy handing in the field. Installation or repairs are simple. An embossed cylinder improves aesthetics and security. The Breakaway design was lab tested to 500,000 cycles in the unlocked position and to 10,000 break cycles, after which it still maintained the required 35 pounds torque to break away. All standard lever designs and function options are available. To order specify: L Trim. 2. Function option, NL, BE, or DT (see page 19). 3. Lever style, other than #06 (see page 19). Note: Night latch and dummy trims have rigid levers and do not break away. 21

55 98/99 Options Pneumatic Controlled Exit Devices PN Less Dogging LD Less Dogging is available in all 98/99 Panic Exit devices to remove the dogging option. To Order, Specify: Use prefix LD, example LD99L The PN feature provides remote latch bolt retraction in hazardous areas where electrically operated devices would not be permitted. The pneumatic solenoid will retract the latch bolt for momentary or prolonged periods. PN exit devices are particularly suited for use with automatic door operators. The PN feature is available on both Panic and Fire Exit Hardware devices. The PN feature includes a special actuating linkage that gives building owners the option of mechanically or pneumatically dogging the exit device. If manual hex-key dogging is required, specify HD-PN (Dogging the device, whether mechanically or pneumatically, makes the device function as a push/pull unit and reduces the wear on its moving parts.) If cylinder dogging is required, the standard cylinder dogging is not available, but special center case dogging is available, specify SD-PN. SD-PN is not available on the 9875 or 9975 devices. When activated pneumatically, the latch bolt(s) of the exit device retract in ¹ ₂ to 1 ¹ ₂ seconds. This pneumatic operation uses air pressure ranging from 50 to 100 pounds per square inch. This product will function only when it is part of a pneumatic system (air compressor, air lines, pneumatic system, etc.). Contact LCN for correct control boxes To Order, Specify: Standard Use prefix PN, example PN99NL Hex Key Dogging Use prefix HD-PN, example HD-PN99NL Special Center Case Dogging Use prefix SD-PN, example SD-PN99NL Double Cylinder 2 Special Center Case Dogging SD Special cylinder dogging in the center case is available for Chexit, EL, ALK panic devices to allow for mechanical push/pull operation. With this option, the latchbolt is held retracted and pushbar is still operable. Specify handing RHR or LHR. SD requires 1 ¹ ₄" (32mm) mortise cylinder with a straight cam. (Schlage cam reference B ) Note: Available on Rim and Vertical Rod Panic Exit Devices only. To Order, Specify: Use prefix SD, example SD99L Cylinder Dogging CD Cylinder dogging is available on all 98/99 Panic Exit devices to replace the standard hex key dogging. Unit requires a standard 1¹ ₄" (32mm) mortise cylinder with a straight cam (Schlage Cam B reference). To Order, Specify: Use prefix, CD, example CD99L Cylinder Dogging Kit CDK For field conversion, a cylinder dogging conversion kit is available. Cannot be added to fire exit hardware. Order: 33A/99CDK or 35A/98CDK, specify finish. Hex Key Dogging Kit HDK For field conversion, a hex key dogging conversion kit is available. Cannot be added to fire exit hardware. Order: 33A/99HDK or 35A/98HDK, specify finish. Double cylinder features an inside key cylinder which locks or unlocks the outside trim and an outside key cylinder which retracts the latch bolt only(night Latch Function). Available on rim or mortise lock device. Rim requires two rim type cylinders. Mortise device requires 1 rim cylinder and 1 mortise cylinder wit a straight cam. (Schlage cam reference B ) Available functions are thumbpiece, knob or lever. To Order, Specify: 1. Suffix-2 with device/trim number, example 99TP Handing required, LHR or RHR. Braille, Embossed and Knurled Touchpads Braille touchpad is embossed with the message CAUTION STAIRWELL in braille and raised letters provides assistance to person with impaired vision. Letters are ¹ ₂" (13mm) high and braille is #2, raised height is ³ ₃₂" (2mm). Other messages are available on special order, limited to 20 characters per line. Embossed touchpad is embossed with the word PUSH Knurled touchpad is to provide warning to person with impaired vision Ingersoll-Rand. May be copied for use with specification submittal.

56 33A/35A Rim Device Trim Exit Only Pull when dogged Key retracts Key retracts Key locks latch bolt latch bolt lever (Pull required) (#06 lever standard) Product Description Trim Description Base Size Grip Size Projection ANSI Function Cylinder Type 33A-EO 33A-DT 33A-NL 33A-NL-OP 33A-L 1,2,3,4,5 35A-EO 35A-DT 35A-NL 35A-NL-OP 35A-L 1,2,3,4,5 386DT 386NL L 7¹⁵ ₃₂"h x 1⁵ ₈"w 7¹⁵ ₃₂"h x 1⁵ ₈"w 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 8¹ ₂"h x 4⁵ ₁₆"w 8¹ ₂"h x 4⁵ ₁₆"w 4¹ ₂" 2⁷ ₁₆" 2⁷ ₁₆" 1" 3" Rim Rim 1¹ ₄" Mortise Straight Cam Key retracts latch bolt Key retracts latch bolt Key locks thumbturn Key locks thumbturn (Pull required) Product Description Trim Description Base Size Grip Size Projection ANSI Function Cylinder Type 33A-NL-OP x 550 DT 33A-NL-OP x Ives 8190 Pull 33A-TL 1,2,4,5 33A-TL x Ives 8190 Pull 1,2,4,5 35A-NL-OP x 550 DT 35A-NL-OP x Ives 8190 Pull 35A-TL 1,2,4,5 35A-TL x Ives 8190 Pull 1,2,4,5 388 x x IVES 8190 Pull 360T 360T x Ives 8190 Pull 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 7¹ ₂"h x 1¹¹ ₁₆"w x ⁷ ₈"d 10" 10" Suggested 10" Suggested 2⁵ ₈" 3¹ ₄" 1¹³ ₁₆" 3¹ ₄" Rim Rim 1¹ ₄" Mortise 1¹ ₄" Mortise Straight Cam Straight Cam Two #425 sex bolts are furnished standard for end case mounting. When exit only (EO) is used, two #325 are furnished for mounting center case. 1 If no cylinder is required specify BE blank escutcheon, trim always operable; example 33A-L-BE. 2 NL function is available by changing orientation of mortise cylinder cam. 3 Matching dummy trim is available, order 360L-DT trim. 4 Wood door applications require the 33A-WDA door cover plate. 5 Cylinder collar required for 1¹ ₂" cylinders. 5

57 Strike Application/Minimum Stile Device Standard Optional Type Single door Double door Single door Double door Strike Stile Strike w/mullion* Stile Strike Stile Strike w/mullion* Stile 33A ³ ₄" (70mm) 299 x ⁵ ₈" (67mm) 35A ³ ₄" (44mm) 1408 x ³ ₄" (44mm) ³ ₄" (44mm) 299 x ⁵ ₁₆" (84mm) ¹ ₂" (64mm) 1606 x ³ ₄" (70mm) 299 (Top) 299 (Top) 266 (Top) 266 (Top) 3327A 385A (Bottom) 3 ¹ ₈" (79mm) 385A (Bottom) 3 ¹ ₈" (79mm) 3527A 304L (Bottom) 1³ ₄" (44mm) 304L (Bottom) 1³ ₄" (44mm) 260U (Top) 260U (Top) 248L-4 (Bottom) 248L-4 (Bottom) 385A (Bottom) 2 ¹ ₈" (54mm) 385A (Bottom) 2 ¹ ₈" (54mm) 3327A-F 299F (Top) 3527A-F 304L (Bottom) 2 ³ ₁₆" (56mm) 3327A-LBR-F 499F (Top) 3 ⁵ ₈" (92mm) (Req. Auxiliary Fire Latch) 3347A 3547A 338 (Top) 2 ¹ ₂" (64mm) 338 (Top) 3348A 385A (Bottom) 385A (Bottom) 1 ³ ₄" (44mm) 304L (Bottom) 2 ¹ ₂" (64mm) 304L (Bottom) 2 ¹ ₂" (64mm) 3548A 3347A-F 3547A-F 338 (Top) 3348A-F 385A (Bottom) 3 ¹ ₂" (89mm) 304L (Bottom) 3 ¹ ₂" (89mm) 3548A-F 3347A-LBR 3547A-LBR 3348A-LBR 338 (Top) 2 ¹ ₂" (64mm) 338 (Top) 2 ¹ ₂" (64mm) 3548A-LBR 3347A-LBR-F 3547A-LBR-F 338 (Top) 3 ⁵ ₈" (92mm) *Mullion information Refer to the General and Auxiliary Catalog. Strikes for Rim Devices 33A/35A Strike/Stile Information Integral Stop Projection ¹³ ₁₆" (21mm) One per pair of doors Projection ¹ ₂" (13mm) Projection ¹ ₂" (13mm) Projection ³ ₈" (10mm) For rim/vertical rod combination consult factory Strikes for Vertical Rod Devices 260U Flush Transom Only F Projection ³ ₈" (10mm) Projection 1¹ ₄" (32mm) Projection ¹³ ₁₆" (21mm) Projection ¹³ ₁₆" (21mm) 304L A 499F Mortise ¹³ ₁₆" (21mm) Mortise ⁵ ₈" (16mm) Mortise 2 ¹ ₂" (64mm) Projection ¹³ ₁₆" (21mm) 19

58 98/99 Trim Operation Selection Operation Options Lever and Knob Operations 374T/376T Series Thumbturn Control (Shown with 990DT Trim) Standard operation, key locks and unlocks lever or knob. e.g., 996L (Classroom) Blank escutcheon, lever or knob always active. Use BE suffix, e.g., 996L-BE. (Passage) Night latch, key retracts latch bolt. Lever or knob is rigid. Use NL suffix, e.g. 996LNL. (Storeroom) Dummy trim, lever or knob rigid for pull operation. Use DT suffix, e.g., 996L-DT. Standard operation, key locks and unlocks thumbturn. Optional operation, key unlocks thumbturn, re-locks when key is removed. This operation is created by changing the cylinder plate included with control. Use 1¹ ₄" mortise cylinder with a straight cam. Schlage cam reference B HL6 Exit Device Trim Option Von Duprin and Glynn-Johnson have collaborated on an exit device trim that answers the problem of accessibility and performance.using the Von Duprin 98/9975 mortise lock exit device along with the Glynn-Johnson HL6 Push/Pull latch, Ingersoll-Rand has created an exit device with mortise lock durability that utilizes a fully ADA compliant Pull paddle trim. The 98/9975HL device is available in all standard architectural finished and can be found in the Von Duprin device price list for easy ordering. Vandal Resistant Trim VR910 & VR914 Series Features: Stainless Steel construction, 11 gage (0.120" thick) Thru-bolts and rugged mounting screws for maximum fastening strength screws supplied with VR910 & VR914 models. Built-in lock protector prevents vandalism to mortise latchbolt (available on certain models). Extra-tough stainless steel cylinder collar prevents pipe wrench or similar tool from damaging cylinder. Tapered design prevents side impacts from transferring directly to cylinder. Collar spins freely. Furnished with mounting screws for door thicknesses of 1³ ₄" to 2¹ ₄" Model For Use With Size Finish: US32D VR910 grip coated in black plastisol for softer touch and resilience to temperature extremes. Grip designed for comfortable operation. VR914 grip in all stainless steel. Meets ANSI/BHMA , Trim Security Test and California State Accessibility Standards Title 24. 1¹ ₂" (38mm) clearence from grip to door 1⁷ ₈" (48mm) total projection from door Consult IVES catalog for specification/ordering information. VR910DT & VR914DT 98/99 Rim or Vert. Rod Device VR910NL & VR914NL 98/99 Rim or Vert. Rod Device 5¹ ₄" (133mm) w x 11" (279mm) h 5¹ ₄" (133mm) w x 11" (279mm) h VR910M-DT & 9875/9975 Mortise Device 7¹ ₄" (184mm) w x 11" (279mm) h VR914M-DT VR910M-NL & 9875/9975 Mortise Device 7¹ ₄" (184mm) w x 11" (279mm) h VR914M-NL 35