LUNERA T8 LED RETROFIT KITS 1/2/3/4-Lamp Replacement Kits for 2FT or 4FT T8 Fluorescent Lamps
|
|
- Abel Hancock
- 5 years ago
- Views:
Transcription
1 Gen 1 Installation Guide LUNERA T8 LED RETROFIT KITS 1/2/3/4-Lamp Replacement Kits for 2FT or 4FT T8 Fluorescent Lamps Type C - External Driver Installation Description The LUNERA T8 LED RETROFIT KITS consist of one, two, three or four 4FT T8 LED lamps or two, three, or four 2FT T8 LED lamps and a 0-10V dimmable external LED driver, which operates off of 120V-277V AC. These are Type C (External LED Driver) retrofit kit replacements of 1, 2, 3 or 4 bi-pin T8 fluorescent lamps and the fixture s fluorescent ballast. The kitted lamps do NOT support line voltage or fluorescent ballasts. 1-Lamp + Driver (4Ft only) 2-Lamp + Driver 3-Lamp + Driver 4-Lamp + Driver Product SKU Marking Product SKUs marked on the lamp and driver must match one of the following lamp and driver SKUs: Kit Part Number (Ordering PN) Which consists of: Lamp Part Number Driver Part Number Each Kit HN-T8-KIT W-8XX-G1 HN-T8-EX-48-12W-8XX-G1 HNPS-T8-U-2x15W-I300-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-15W-8XX-G1 HNPS-T8-U-2x18W-I360-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-12W-8XX-G1 HNPS-T8-U-2x15W-I300-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-15W-8XX-G1 HNPS-T8-U-2x18W-I360-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-12W-8XX-G1 HNPS-T8-U-4x15W-I300-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-15W-8XX-G1 HNPS-T8-U-4x18W-I360-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-12W-8XX-G1 HNPS-T8-U-4x15W-I300-G1 HN-T8-KIT W-8XX-G1 HN-T8-EX-48-15W-8XX-G1 HNPS-T8-U-4x18W-I360-G1 4FT x Driver 4FT x Driver 4FT x Driver 4FT x Driver HN-T8-KIT2-24-8W-8XX-G1 HN-T8-EX-24-8W-8XX-G1 HNPS-T8-U-2x15W-I300-G1 2FT x Driver HN-T8-KIT3-24-8W-8XX-G1 HN-T8-EX-24-8W-8XX-G1 HNPS-T8-U-4x15W-I300-G1 2FT x Driver HN-T8-KIT4-24-8W-8XX-G1 HN-T8-EX-24-8W-8XX-G1 HNPS-T8-U-4x15W-I300-G1 2FT x Driver 4Ft x 4, 12W 4Ft x 3, 12W 4Ft x 2, 12W/15W 2Ft x 2, 8W XX may be 30 (3000K), 35 (3500K), 40 (4000K), or 50 (5000K)
2 2 of 6 Fixture Dimensions The minimum dimension of luminaires are: Model [Length x Width x Height] HN-T8-KIT4-48-8W-8XX-G1 123cm x 60cm x 11cm 48.4 x 23.6 x 4.3 HN-T8-KIT3-48-8W-8XX-G1 123cm x 60cm x 11cm 48.4 x 23.6 x 4.3 HN-T8-KIT2-48-8W-8XX-G1 123cm x 30cm x 11cm 48.4 x 11.7 x 4.3 HN-T8-KIT1-48-8W-8XX-G1 123cm x 30cm x 11cm 48.4 x 11.7 x 4.3 HN-T8-KIT4-24-8W-8XX-G1 62cm x 60cm x 11cm 24.3 x 23.6 x 4.3 HN-T8-KIT3-24-8W-8XX-G1 62cm x 60cm x 11cm 24.3 x 23.6 x 4.3 HN-T8-KIT2-24-8W-8XX-G1 62cm x 30cm x 11cm 24.3 x 11.7 x 4.3 zz may be 12W or 15W; XX may be 30 (3000K), 35 (3500K), 40 (4000K), or 50 (5000K) Installation Instructions - Type C, External LED Driver Prepare the Fixture for Retrofit 1. Turn power OFF to the fixture. 2. Remove existing T8 electronic ballast from the fixture - do not disconnect existing wires from the tombstones. Check the Lampholders for Condition 3. Replace Shunted or Non-Shunted lampholders that are rusted, cracked, or corroded. Installing the Kitted LED Driver 4. Wire the kitted Lunera LED driver replacement of the fluorescent ballast. Connect the LED driver s output wires to the G13 bi-pin T8 tombstones as instructed in Figures 1 (one-lamp), 2 (two-lamp), 3 (three-lamp) or 4 (four-lamp). Completing the Installation 5. Install the fixture modification sticker that shipped with the kit inside the fixture. 6. Install the kitted Lunera T8 LED lamps. 7. Turn power ON.
3 3 of 6 Wiring Flexibility Wiring flexibility is a benefit of Lunera's Type C LED Retrofit Kits. Successful wiring of the retrofit lamp can be accomplished regardless of which socket types are used, which pair of pins are connected, or which direction the lamp is installed. 1. Socket Selection The Lunera Type LED Retrofit Kit lamps are compatible with either Shunted or Non-Shunted tombstone sockets. Inspect the existing sockets to ensure they are in good working order. If they need to be replaced, its is recommended to use either Shunted or Non-Shunted sockets, but do not mix them. 2. Pin Selection Select any pair of pins. Either pin can be positive or negative. It is recommended pin and polarity wiring is done consistently for each lamp in the fixture.
4 4 of 6 Wiring Flexibility, continued 3. Unused Driver Leads The paired LED driver for the single- and 3-lamp kits will have an extra, unused power pair. This extra pair should be capped off. Single-Lamp Installation 3-Lamp Installation 4. Lamp Orientation The Lunera Type LED Retrofit Kit lamp can be installed in either direction, as long as the LED strip is facing down with the back of the LED strip facing the top of the fixture. Side View of lamp in fixture
5 5 of 6 Three-Lamp Retrofit Luminaire Wiring Diagram Example In this wiring example, the driver power pairs are connected consistently to lamp pins A and B, but any two pair could be selected. The lamps are installed in Shunted or Non-Shunted tombstone sockets and the orientation of the lamp is universal, as shown by the middle lamp being reversed, as long as the LEDs are facing towards the fixture opening. The unused power pair leads from the driver have been capped off and the driver is connected to 120V-277V AC.
6 6 of 6 GENERAL SAFETY INFORMATION READ AND FOLLOW ALL SAFETY INSTRUCTIONS DANGER - RISK OF SHOCK - TURN POWER OFF BEFORE INSTALLATION WARNING - IF THE LAMP OR LUMINAIRE EXHIBITS UNDESIRABLE OPERATION (BUZZING, FLICKERING, ETC) IMMEDIATELY TURN OFF POWER, REMOVE LAMP FROM LUMINAIRE AND CONTACT MANUFACTURER. Risk of fire or electric shock. LED retrofit kit installation requires knowledge of luminaires electrical systems. If not, do not attempt installation. Contact a qualified electrician. WARNING - To prevent damage to wiring, do not expose wires to the edges of sheet metal or other sharp objects. Installer should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder terminals. Instead, installers should cut existing lamp holder leads way from the lamp holder and make new electrical connections to lamp holder s lead wires by employing applicable connectors. All electrical connections shall be provided within an enclosure. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation. CAUTION - DO NOT INSTALL THIS LAMP DIRECTLY INTO LINE VOLTAGE [THIS LAMP OPERATES OFF OF LUNERA S EXTERNAL LED DRIVER ONLY] NOTES: Lamp installation in the following conditions and applications voids the product warranty: - Lamp installation into cracked, broken, dirty, or rusted tombstones - Lamp installation into ballast or line voltage voids the warranty. - Improper wiring of the Lunera LED Driver to tombstones voids the warranty. * This device complies with Part 15 of FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. REV 1518A 2018 Lunera Inc. All Rights Reserved. Lunera and the Lunera logo are registered trademarks of Lunera Inc. All other trademarks are the property of their respective owners. Specifications are subject to change without notice. This document is for informational purposes only.
LUNERA T8 LED RETROFIT KITS 2/3/4-Lamp Replacement Kits for 2FT or 4FT T8 Fluorescent Lamps
Gen 1 Installation Guide LUNERA T8 LED RETROFIT KITS 2/3/4-Lamp Replacement Kits for 2FT or 4FT T8 Fluorescent Lamps Type C - External Driver Installation Description The LUNERA T8 LED RETROFIT KITS consist
More informationLUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed
Installation Guide LUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed Installation Description The LUNERA VERTICAL E26 LED FLOODLIGHT is a line driven
More informationInstallation Instructions: Memory-Dimmable SEP T8 Tube Lamps
Installation Instructions: Memory-Dimmable SEP T8 Tube Lamps Installation Notes & Precautions: Memory-Dimmable SEP T8 LED Tube Lamp Read all precautions, warnings, instructions contained in this document.
More informationInstallation Instructions: External-Driver SEP T8 LED Tube Lamp
Installation Instructions: External-Driver SEP T8 LED Tube Lamp Installation Notes & Precautions: External-Driver SEP T8 LED Tube Lamp Read all precautions, warnings, instructions contained in this document.
More informationLED 2/3/4ft T8 Tube 120V
E-T8-1200-YR LED 2/3/4ft T8 Tube 120 Our LED Tubes utilize the latest LED chips as the light source, whilst using the standard T8 end caps, which makes it easy to install and replace traditional fluorescent
More informationTECTONIC LED CORP. ISO
TECTONIC TECTONIC LED CORP. ISO 9001:2000 Products RoHs Compliance Instruction Menu Retrofit:LED Tube Lamps SECTION 1 - General Information Kit components: 1-LED Tube, 1-Label and 1-Set of Instructions
More informationwww.greenelectricalsupply.com 1x4 2x2 & 2x4 Read all instructions and warnings before attempting installation. RISK OF FIRE OR ELECTRIC SHOCK. LED RETROFIT INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES
More informationProduct Installation Instruction LED Tube Lamp Retrofit Kits
Regular T8 internal driver single end Product Installation Instruction LED Tube Lamp Retrofit Kits 1 General Description LED Tube Light adopts the new type LED as the light source, using the standard T8
More informationInstruction/Installation Manual
Instruction/Installation Manual Retrofit:LED Tube Lamp 4ft. Fluorescent T8/T10 Replacement 1 SECTION 1 - General Information Kit components:1-led Tube, 1-Label and 1-Set of Instructions Models were only
More informationLED Recessed Troffer Retrofit Kit
Model # TRK series LED Recessed Troffer Retrofit Kit Installation Instructions PACKAGE CONTENTS A B E Part Item Name Qty. A Retrofit assembly 1 B Bracket 2 C Sheet metal screw 4 D Wire nuts 5 E Gap channel
More informationLumination TM LED Luminaire LUR Series
Installation Guide Lumination TM LED Luminaire LUR Series BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF FIRE OR ELECTRIC SHOCK Turn power off before inspection,
More informationInstallation Guide. WARNINGS Read all instructions and warnings before attempting installation
Installation Guide WARNINGS Read all instructions and warnings before attempting installation ALWAYS MAKE ABSOLUTELY SURE THE POWER IS OFF WHEN PERFORMING THE FIXTURE MODIFICATION. DURING INSTALLATION,
More informationStrip Fixture URS Light Bar Retrofit Installation Instructions Revised:
Strip Fixture URS Light Bar Retrofit Installation Instructions Revised: 20180126 These instructions do not purport to cover all details or variations in components nor to provide for every possible contingency
More informationINSTALLATION GUIDE Works in double and single ended wiring.
ISTAATIO GUIDE Works in double and single ended wiring. -1- Safety Precautions For your and others safety, please read the precaution carefully before installation: (1). Product should be installed by
More information7.5 FT PRE-LIT ENGLEWOOD PINE TREE
ITEM #0243778 7.5 FT PRE-LIT ENGLEWOOD PINE TREE Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. MODEL #W14L030 Español p. 11 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationULTRA PERFORMANCE LED TUBE INSTALLATION INSTRUCTIONS
Ultra Performance LED Tube Installation Instructions Page 1 of 7 ULTRA PERFORMANCE LED TUBE INSTALLATION INSTRUCTIONS These instructions do not purport to cover all details or variations in components
More informationInstallation Instructions: Eco-Fit T8 LED Tube Lamp
Installation Instructions: Eco-Fit T8 LED Tube Lamp Key Features Ballast-ready Compatible with existing fluorescent ballasts No mercury or UV Long 50,000-hour life UL, cul, RoHS Rugged, solid-state design
More informationIMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following:
ZR-RK Series LED Retrofit Troffer Kit Includes: ZR22RK and ZR24RK Standard and Emergency Luminaires IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed
More informationProduct Selection Card
Summer 2018 Lamps -- Gen 2 11W 1,800 15W 2,200 3Ft Gen 2 11W 1,400 8W 1,200 Bi-pin G13 22in 6 15W 2,200 22in 1-5/8 12W 1,700 17W 2,100 Lamps -- Lunera LED Gen DLC Status UL Type Wattage Max Lumens Color
More informationECO EXT (DIMMABLE)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. ECO EXT (DIMMABLE) www.trulygreensolutions.com
More informationStik Families GENERAL PURPOSE RETROFIT SIGN CONVERSION FOR USE ONLY IN ACCORDANCE WITH KIT INSTRUCTIONS
Stik Families Qwik Stik, Street Stik, Slim Stik, Tap Out Stik Product Retrofit Guide WARNING Installation must only be performed by a licensed electrician. To prevent death, injury or damage to property
More informationINSTALLATION INSTRUCTIONS
LED LIGHT ENGINE APPLICATION PROGRAM INSTALLATION INSTRUCTIONS LED Light Engine Kit Model: 9 Round Engine 120V: TRIAC DIMMING TKT120025RDxx-01 TKT120025RDxx-11 TKT120021RDxx-01 TKT120021RDxx-11 TKT120025RDxx-02
More informationINSTALLATION INSTRUCTIONS ModuSys LED Retrofit Kit 2x2, rev. D.02
INSTALLATION INSTRUCTIONS ModuSys LED Retrofit Kit 2x2, rev. D.02 Important safety information - read all instructions before installation. WARNING Risk of fire or electric shock. Luminaire wiring and
More informationLED Indoor Lighting Product Guide
LED Indoor Lighting Product Guide 120 Rowell Road Hampshire, IL 60140 847-302-8998 Phone 847-683-8002 www.ledrite.com LT Model T8 Series T8 LED TYPE C EXTERNAL DRIVER 2FT X 2 RETROFIT KIT This T8 LED 2FT
More informationFOR INDOOR/SEASONAL USE ONLY
9' Warm White /Multi LED Color Changing One Plug Tree V66362-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION.
Installation Instructions RT8RT/RT5RT Relight Assembly READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION. IMPORTANT SAFETY INSTRUCTIONS WARNING: FAILURE
More informationUniversal Retrofit System Installation Instructions Revised:
Universal Retrofit System Installation Instructions Revised: 20150624 These instructions do not purport to cover all details or variations in components nor to provide for every possible contingency to
More informationHOME CHARGER MODE 2. Series to /32A single phase CONTENTS. Manual IMPORTANT SAFETY INSTRUCTIONS 3 SAFETY INFORMATION 4 INSTALLATION 5
CONTENTS IMPORTANT SAFETY INSTRUCTIONS 3 SAFETY INFORMATION 4 INSTALLATION 5 OPERATION 8 SPECIFICATIONS 8 MAINTENANCE 9 HOME CHARGER MODE 2 Series 31328 to 31340 16/32A single phase FCC INFORMATION 9 WARRANTY
More informationOPTIMAX RADIANT FIELD RETROFIT INSTRUCTIONS
OPTIMAX RADIANT FIELD RETROFIT INSTRUCTIONS 99-24283-I001 Table of Contents 1. 24V LED Approved Drivers 5 1.1. 24V LED Driver (60-19910-0002).. 5 2. Optimax Radiant 24V LED Lighting. 6 2.1. OP30 6 2.2.
More informationSolid State T8 tube is the smart alternative to a
Solid State T8 tube Ideal for decorative and ambient lighting in retail outlets, hotels, restaurants, government buildings, and multi-unit residences L Prize Winner Solid State T8 tube Direct Replacement
More informationTRUET5 EXT (DIMMABLE)
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TRUET5 EXT (DIMMABLE) www.trulygreensolutions.com
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION.
Installation Instructions 2RTLEDR/2RTLEDRT Relight Assembly READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION. IMPORTANT SAFETY INSTRUCTIONS WARNING:
More informationSylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V
Sylvania 9 Color Changing One Plug Tree Tree ID # T5, Item # V66354-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with 600 LED lights. This tree has 8 lighting
More informationLED microwave sensor T8 tube light
LED microwave sensor T8 tube light Product Feature Microwave sensor LED T8 offers a driver and radar sensor intergrated technology. The new technology helps the LED tube save more energy. LED tube will
More informationAsymmetrical Installation Instructions. Components: i2cove Asymmetrical LED Light Fixtures. 12 [305mm] [918mm] 48.
support@i2systems.com www.i2systems.com Electrical Specifications PARAMETER Input Power VALUE 8 Watts* / Ft Input Voltage 120-277V AC, 50/60 Hz Max. Fixture Run Length LED Color (CCT) 8 Watts: 120VAC:
More informationMAXLITE RKT LED Retrofit Kit
MAXLITE RKT LED Retrofit Kit Description and Intended Use The RKT LED Retrofit Kit is a high performance LED Fixture upgrade kit designed to replace the original components inside 2 x2 and 2 x4 fluorescent
More informationLED T8 BP. GE Lighting. Tubular lamps DATA SHEET. Specification Features. Product information. Applications. IEC standards
GE ighting ED T8 BP Tubular lamps DATA SHEET Product information The GE ED T8 range offers safe, reliable and affordable energy saving alternatives to standard Fluorescent T8 lamps. Available in 60cm,
More informationLED IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More information7.5' LED Silver Glitter with Pinecones One Plug Tree V INSTRUCTION MANUAL
7.5' LED Silver Glitter with Pinecones One Plug Tree V70065-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationInstallation Instructions: Eco Linear High Bay
Installation Instructions: Eco Linear High Bay Installation Notes & Precautions: Read all precautions, warnings, instructions contained in this document. These instructions can be used to install Eco Linear
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
7.5 Swift Lock Ready Shape Tree (Patent Pending) Instructions IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND
More informationAssembly Instructions Retrofitting
Assembly Instructions Retrofitting These instructions are for replacing existing lighting fixtures or systems with our new, higher efficiency TLS, drivers and controls. www.tls-lumisign.com 514-858-6556
More informationLED IMPORTANT SAFETY INSTRUCTIONS
LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More informationSTOP BEFORE YOU BEGIN READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY
STOP BEFORE YOU BEGIN READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY WARNING Risk of fire or electrical shock. LED retrofit installations require knowledge of luminaire electrical systems. If not qualified,
More informationLED Utility Wrap Fixture
Operating Instruction Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings,
More informationAnthony LED Lighting System Retrofit Installation Instructions For Models 101X and 101A
Anthony LED Lighting System Retrofit Installation Instructions For Models 101X and 101A 99-16999-0000 Table of Contents 1. Removing Fluorescent Lighting... 4 1.1. Detach the lens assembly... 4 1.2. Remove
More informationINSTALLATION INSTRUCTIONS STEP-DOWN TRANSFORMER HOUSING KIT
Rev NSTLLTON NSTRUCTONS STP-DOWN TRNSFORMR HOUSN KT Step-Down Transformer Housing Kit Compatibility: Step-Down Transformer Housing Kit Step-Down Transformer High-ay Conversion Kit HHLPQ32840 HHLSSD1125V
More informationOptimax Pro Retrofit Instructions
Copyright 2011 by ALL rights reserved. Information in this document is subject to change without notice. Companies, names and data used in examples herein are fictitious unless otherwise noted. No part
More informationInstallation Instructions BLTR and 2BLTR Relight Assembly
UT4540 Rev. B Installation Instructions BLTR and 2BLTR Relight Assembly This Relight assembly was engineered to upgrade most recessed fixtures mounted in T-grid ceiling installations, including most parabolic
More informationLED Fluorescent Replacement
LED Fluorescent Replacement Find the perfect LED alternative for fluorescent lamps while eliminating mercury content from your lighting system. Increased energy efficiency makes these lamps the ideal replacement
More informationATTACH YOUR RECEIPT HERE ITEM # FT. PRE-LIT DOUGLAS FIR TREE. MODEL #DF-75C85 Español p. 8
ITEM #0776 7. FT. PRE-LIT DOUGLAS FIR TREE MODEL #DF-7C8 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our
More informationLEDlescent TM T8 Ballast-Free Lamps
www.sylvania.com LEDlescent TM T8 Ballast-Free Lamps 2 North American Market T8 LED Options Replacement Lamps (UL Type A) Internal Driver Line Voltage Lamps (UL Type B) Single Ended Internal Driver Line
More informationINSTALLATION INSTRUCTIONS 120V DirectAC LED Engine Kit
10W DirectAC Engine TJT120010ACxyyB 15W DirectAC Engine TJT120015ACxyyB INSTALLATION INSTRUCTIONS 120V DirectAC LED Engine Kit TJT120010ACxyyB TJT120015ACxyyB TJT120023ACxyyB TJT120010ASxyyC TJT120010ACxyyC
More informationLED IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More informationGeneral Installation Instructions LED
General Installation Instructions LED To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions and other hazards, please read all warnings
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS 1. DANGER RISK OF SHOCK DISCONNECT POWER BEFORE INSTALLATION
UR Series LED Upgrade Kit Includes: 24" Linear Option IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL
More informationLED Flat Panel Installation Instructions For 1 x4, 2 x2, and 2 x4 LED Flat Panels (FP Series)
LED Flat Panel Installation Instructions For 1 x4, 2 x2, and 2 x4 LED Flat Panels (FP Series) PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION SAFETY
More informationINSTRUCTION MANUAL. IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following:
IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. CAUTION To prevent electrical
More informationRLK SERIES Retrofit Lamp Kit for LED Tubes
RLK SERIES Retrofit Lamp Kit for LED Tubes The RLK retrofit lamp kit eliminates the hassle of rewiring in the field. The kit can be used for provided lamps or LED T8 lamps that are UL classified for Retrofit
More informationLunera T-LED Lamp Family: Engineered for Quality & Reliability
Application Note Lunera T-LED Lamp Family: Engineered for Quality & Reliability Engineering Best-of-Class T-LED Lamps Lunera s T-LED Lamp family is engineered to be the best-ofclass, setting the industry
More informationDESIGNING A BETTER T8 LAMP
ESIGNING A BETTER LAMP Flexible PCB Flexible PCB for greater reliability/safety and better thermal conduction. High Performance Carefully selected highperformance LEs are powered at less than 40% of their
More informationInstallation Instructions
LEDLUX EXPRESS MAXI DIMMABLE LED DOWNLIGHT SKU# 170577, 170578 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow
More informationInstallation Instructions
ACCENT PINHOLE DOWNLIGHT SKU#177638, 177639, 177640, 177641 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality MFL product. To ensure correct function and safety, please read and follow
More informationT8 Tube Light. UL LISTED & cul LISTED & DLC LISTED. Germany Patent: Gebrauchsmusters / Nr
T8 Tube Light Ideal for decorative and ambient lighting in retail outlets, hotels, warehouses, government buildings, and multi- unit residences T8 Tube Light UL LISTED & cul LISTED & DLC LISTED Germany
More informationINSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F
SAFETY S IMPORTANT SAFETY INFORMATION SUITABLE FOR DRY OR DAMP LOCATIONS. NOT FOR USE WITH PHASE CUT DIMMERS. Risk of shock. Disconnect power before installation. DANGER CONVIENT AUX EMPLACEMENTS HUMIDES.
More informationPDX and PX Retrofit Series
UNIQUE LIGHTING SOLUTIONS PDX and PX Retrofit Series PDX1-1-12-XX PX1-1-12-X-X-XX-65 RETROFIT INSTALLATION GUIDE PDX and PX Series Retrofit WARNING -Retrofit installation must only be performed by a licensed
More informationInstallation Instructions
CHAMP DIMMABLE LED DOWNLIGHT SKU# 12049L, 12050L, 12051L, 12052L Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality GE branded product. To ensure correct function and safety, please read
More informationSpecification sheet of T8 LED Tube
Specification sheet of T8 LED Tube Brief Introduction Special designed lockable 90-180 degree rotating end caps Lighting efficiency up to 100-110lm/W, Saves up to 70% Energy, Good a l t e rn at i ve to
More informationMP/MTFL LIGHT FIXTURE (Dimming)
Robern 701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 MP/MTFL LIGHT FIXTURE (Dimming) General Notes 1. It is important that the armored cable be installed during electrical rough in. 2. When surface
More informationNOTE: The orientation of the mounting brackets are critical. (See Figure 4)
Page 1 of 5 11.25.13 Lamping Specifications 10138 I-wall 2 120v, One, F14WT5/Mini Bi-Pin 277v, One, F14WT5/Mini Bi-Pin 10139 I-wall 3 120v, One, F21WT5/Mini Bi-Pin, 277v, One, F21WT5/Mini Bi-Pin 10140
More informationLED T8 GLASS 3WAY TUBE
HOW IT WORKS One Tube, Three Wattage. No Dimmer Required. Control the brightness with a regular on/off switch: 1. Switch on 100% 2. Switch off and on 50% 3. Switch off and on 25% Leave it off for 10 seconds
More information9' Warm White /Multi LED Color Changing M5 One Plug tree V INSTRUCTION MANUAL
9' Warm White /Multi LED Color Changing M5 One Plug tree V64886-60 INSTRUCTION MANUAL Thank you for purchasing a SYLVANIA Pre-lighted Tree. This tree assembles in minutes and is decorated with energy saving
More informationSylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V
Sylvania 7.5 Pre-Lit Lindberg Pine Tree 500 Clear Incandescent Lights-One Plug Tree Tree ID #C15, Item # V67658-13 Thank you for purchasing this tree. This tree assembles in minutes and is decorated with
More informationInstallation Instructions
LEDLUX CITYII DIMMABLE LED DOWNLIGHT SKU# 170600, 170601, 170602, 170603, 170604, 170605, 170606, 170607 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct
More informationFieldView External Charger. User Guide
FieldView External Charger User Guide D14059.02 April 2007 IMPORTANT SAFETY INFORMATION READ BEFORE USE The following precautions must be observed when operating the external charger. To reduce the risk
More information4 WAY WIRELESS REMOTE CONTROL SYSTEM. User Manual
4 WAY WIRELESS REMOTE CONTROL SYSTEM User Manual LED Indicator Control Button Remote Negative cable Positive cable Receiver Terminal Mounting Hole 1 of 7 INTENDED USE This product is a remote controlled,
More informationASSEMBLY INSTRUCTIONS
6.5' McKinley Pine ASSEMBLY INSTRUCTIONS MODEL NO: U11G681A-024-01 (WL-018) PRODUCT CODE: 140-034066-910 CAUTION: Carefully Read Instructions and Procedures for Safe Operation Receipt of Purchase: Questions,
More informationHorticulture Batten LED Luminaire
GE Lighting Installation Guide Horticulture Batten LED Luminaire LED Lighting System BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC SHOCK Turn
More informationEcoSystem Multiple Control Input Ballasts
Eco Five Control Digital Dimming s Eco Multiple Control s 369454l 1 09.02.16 Digital electronic dimming ballasts maximize the benefits of a lighting management system. Eco s offer 100% to 10% dimming;
More informationREAD AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More informationRedbird LED Cardinal Stripit Kit Installation Instructions
Redbird LED Cardinal Stripit Kit Installation Instructions September 2015 Required Tools & Supplies ü Cordless drill/driver, preferably with adjustable clutch-head with ¼ magnetic hex bit on a 6 extension
More informationR. STAHL Schaltgeräte GmbH Geschäftsbereich Leuchten Nordstraße Weimar, Germany
ECOLUX 6608 Series 6608/5 Explosion Protected Fluorescent Emergency Light Fixtures for Hazardous and Corrosive Applications Please read this entire document before beginning any work. 1. Safety Instructions
More informationHOME BOX EV CHARGING STATION WITH FIXED CABLE
12 C O N T A C T / C U S T O M E R S U P P O R T HOME BOX EV CHARGING STATION WITH FIXED CABLE Ratio Electric B.V. Ambachtsstraat 12 NL-3861 RH Nijkerk The Netherlands Tel. +31-33-2452360 info@ratio.nl
More informationInstallation Instructions
LEDLUX INFINITY MINI MARINE GRADE DIMMABLE LED DOWNLIGHT SKU# 170310, 170311 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please
More informationLED IMPORTANT SAFETY INSTRUCTIONS
LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage
More information3-Wire Control, 220/240 Volt T-8 Linear, T-4 Quad Tube and T-5 Twin Tube Lamps
3-Wire Control, 220/240 Volt T-8 Linear, rev hi-220-240-1b 1.10.02 2.38 w (60mm) x 1.50 h (38mm) x 9.50 l (241mm) HOT DIMMED HOT NEUTRAL Hi-lume Power Control Dimming Ballast Lamps DESCRIPTION Continuous,
More informationLinear Replacement Lamps
Linear Replacement Lamps PLEASE NOTE: DLC DEFINES ALL TUBE-STYLE LED PRODUCTS THAT USE THE LAMP HOLDERS (I.E. SOCKETS OR TOMBSTONES ) IN THE LUMINAIRE TO MECHANICALLY OR ELECTRICALLY CONNECT TO THE FIXTURE
More informationUSE AND CARE GUIDE 15 INCH WHITE ROUND FLAT PANEL FIXTURE WITH SELECTABLE COLOR TEMPERATURE
74212 USE AND CARE GUIDE 15 INCH WHITE ROUND FLAT PANEL FIXTURE WITH SELECTABLE COLOR TEMPERATURE FEIT ELECTRIC COMPANY PICO RIVERA, CA (800) 543-3348 FAX (562) 908-6360 www.feit.com Table of Contents
More informationInstallation Instructions
TITAN RECESSED SPOT LIGHT SKU#177010, 177011 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality MFL product. To ensure correct function and safety, please read and follow all instructions
More informationMotion and Light Sensor Kit LHBAS51
Motion and Light Sensor Kit LHBAS51 Installation Instructions For Linear Low and High Bay Fixtures PLEASE READ THESE INSTRUCTIONS BEFORE SAFETY INSTRUCTIONS AND WARNINGS WARNING: READ CAREFULLY BEFORE
More informationR. STAHL Schaltgeräte GmbH Geschäftsbereich Leuchten Nordstraße Weimar, Germany
, INC. ECOLUX 6600 Series 6600/5 Explosion Protected Fluorescent Light Fixtures for Hazardous and Corrosive Applications Please read this entire document before beginning any work. 1. Safety Instructions
More informationT8 Retrofit. LED Tubes
T8 Retrofit Designed to replace fluorescent T8 tubes, the MEGAMAN LED T8 offers an incredible lighting performance that reduces both electricity and maintenance costs. With the long lamp life and wide
More informationBluetooth Smart Speed/Cadence Sensor Instruction Manual
Bluetooth Smart Speed/Cadence Sensor Instruction Manual Contents Before using this product... 3 Warranty... 4 List of Parts... 4 Battery... 6 Installation... 7 Pairing... 11 Technical Specs... 11 2 WARNINGS:
More informationInstallation Instructions
Vivid SKU# 170565, 170566, 170567, 170568 Rated Voltage 220-240V~ 50Hz Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions
More informationWireless Dimmer Installation and User Guide
Installation Instructions Supported Models and Fixtures Wireless Dimmer Installation and User Guide This installation and user guide covers these dimmer models: LDZ-101-W Wireless Dimmer (802.15.4) LDZ-101-B
More informationLM79 LM80 L70:5+ YEARS
1.30.18 Want to make your shop Highly Efficient, too? Reduce install mistakes and improve efficiency by transforming your shop with our 24volt System. With our 24volt PhxNRG MODULES, our 24volt PhxNRG
More informationWARNING/AVERTISSEMENT. Coupez l alimentation électrique à la boîte de fusibles ou au disjoncteur avant servicing or installing product.
Tetra Contour LS LED Lighting System GEXNLBL-1, GEXNLGL-1, GEXNLRD-1, GEXNL65-1, GEXNL32-1 Installation Guide 24 Volt BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT
More information