Distributed By: M&M Control Service, Inc PRODUCT PRODUCT CODE TECHNICAL INSTRUCTIONS PAGE #
|
|
|
- Cecily James
- 6 years ago
- Views:
Transcription
1 PRODUCT PRODUCT CODE TECHNICAL INSTRUCTIONS PAGE # Switches Selector Switches SW P25 G-3 Positioning Switch SW P25 G-5 Enthalpy Control Switch EE P25 G-7 Static Pressure Switch SW P25 G-9 G-11 Pressure Electric Switches PE /051/057P25 G-13 Three-way EP Valves EP P25 G-15 Pneumatic Relays Multi-purpose Relay RL P25 G-17 Balance-retard Relay RL /043P25 G-19 Analog Relay RL /044P25 G-21 Switching Relay RL P25 G-23 Reverse Acting Relay RL P25 G-25 Highest Pressure Signal Selector RL P25 G-27 Lowest and Highest Signal Selector RL P25 G-29 Lowest Pressure Signal Selector RL P25 G-31 Positioning Relay RL P25 G-33 Pneumatic Equipment Electronic-to-Pneumatic Transducer EP P25 G-35 Accessories and Service Kits G-37
2 or dampers in commercial applications. The common port may be connected to two or three ports depending on the switch model. diameter knockout most applications air systems to connect and direct supply and signal these especially adaptable to panel groupings. Application Drawing port connections Standard and Large Capacity. Typical Connections 2- and 3-position Selector Switch.
3 Medium... Air Connections Standard Switch... 1/16" NPT... 1/8" NPT Inlet Pressure Nominal... Maximum... Operating Temperature... Capacity at 1 psi (7 kpa) Differential Port Threads NPT female Materials... O-rings... Description Part No. 2-position Accessories & Service Kits C.L. FOR FLOATING SWITCH
4 be left free to rotate or held in position by snapping the locking ring. with snap-action locking ring for maintaining pressure setting diameter knockout systems to maintain a uniform outlet pressure despite changes in the inlet pressure and changes in downstream mount knob is desired. most applications
5 Medium... Air Connections... 1/8" NPT female Inlet Pressure Nominal... Maximum... Operating Temperature... Capacity at 1 psi (7 kpa) Differential Shipping Weight... Description Part No. Positioning Switch Accessories & Service Kits
6 snap-acting electric switch automatically initiates desired settings. than desired heat content. Reduction of outdoor air, when it has a higher heat air conditioning systems. space on initial starting.
7 Electrical Rating... Electrical Connection... Metal enclosure with 1/2" Switching Action...SPDT Differential... Shipping Weight... Description Part No Accessories & Service Kits Electric Enthalpy Control Switch
8 Static Pressure Switch. The 269 Static Pressure Switch senses static pressure and performs a three-way switching function when the used to close outside air dampers when the fan is not Application Drawing Typical Connections 269 Static Pressure Switch.
9 Switching Threshold (differential H to L) Air 1 psi Pressure Drop... Air Supply... Maximum Ratings Pressure Temperature Operating... Storage... Air Consumption... Dimensions... Shipping Weight... Description Part No. Static Pressure Switch Accessories & Service Kits
10 and at setpoint open/closes a set of electrical contacts. before damage occurs to ducts or dampers. fan. The switch can be used on the fan discharge. The auto reset switch should be used for applications that similar maintenance alarms that do not require safety lock Typical Connections Manual Reset Switch and Auto Reset Switches. Auto Reset Switches to or Pressure. Auto Reset Switches to or Pressure.
11 Medium... Switch Action Manual Reset Ambient Temperature Range increasing pressure signal Maximum Overpressure... Mounting Position... Body...Zinc-plated Steel with blue erudite dip Electrical Ratings... Pilot Duty... Conduit Opening... Sample Line Connectors...2 connectors, complete with nuts and ferrules, which accept Material... Agency Approvals... Dimensions... Shipping Weight... polyethylene tubing Set Point Range (Field Adjustable) Switching Action/Reset Factory Set Point Accuracy Differential Part No SPST/ Manual Reset at max. set point Accessories & Service Kits Part No. in black box Ships same day when requested through Rapid Response TM shipping. See page 2 for details.
12 pressure-actuated, mechanical contact type switches used to open or close electrical circuits from pressure signals in pneumatic control systems. and differential basis of a predetermined air pressure signal. This switch is to be used in areas protected from the weather. Typical applications include the control of air compressors, fans, pilot lights, resistance heating elements, control of electric heating loads or motors on fans, pumps or small air compressors.
13 Medium... Set Point Range... Differential... Maximum Pressure... Pressure Connection... 1/8" male NPT Conduit Opening... Ambient Temperature... Pilot Duty Agency Approval (for only)... Shipping Weight... Description Switch Action Electrical Rating Part No. IND: DPST Non-IND: IND: Non-IND:
14 Three-way Three-way alternately apply pressure to and exhaust pressure from below. The input air is connected to port 1 (normally to port 3 permitting the thermostat to control the damper the actuator permitting it to return to its normal position. Application Drawings
15 Ambient Temperature Controlled Medium... Maximum Air Pressure... Air Flow Capacity... Differential Pressure Junction Box Open Frame AC Voltage 60 Hz 50 Hz Part No Cv Flow Factor Electrical Ratings Mounting Bracket... Junction Box... Air Connections... Materials Shipping Weight part of the yoke. OD tubing to 1006 Junction Box Type to 1008 Open Frame Type Part No. in black box Ships same day when requested through Rapid Response TM shipping. See page 2 for details.
16 Multi-purpose Relay. functions for the typical control system. relay, and lower pressure transfer. Typical Connections R = output TD = direct acting input TR S = air supply For more detailed information on applications, refer to page I-23 in the Engineering section.
17 Ambient Temperature Range Operational... Storage... Hysteresis... Relief Valve Differential... Air Capacity... Air Consumption (max.)... Spring Range...0 to 25 psi (0 to 172 kpa Air Connections... 1/8" NPT Spring Adjustment Range... Supply Air Normal... Maximum... Shipping Weight... Description Part No. Multipurpose Relay
18 such as balancing, signal retard, hesitation, and pressure limiting. combinations. Each combination represents a relay function in a control loop. The relay is factory set for balancing action. Typical Connections R = output TD = direct acting input TR S = air supply For more detailed information on applications, refer to page I-23 in the Engineering section.
19 Ambient Temperature Range Operational... Storage... Hysteresis... Relief Valve Differential... Air Capacity... Air Consumption (max.)... Spring Range... Air Connections... Spring Adjustment Range... Retard... Supply Air Normal... Maximum... Shipping Weight... Description Part No
20 control action within a pneumatic control system. mounted in any position differential pressure, ratio control higher pressure and consumption. Typical Connections R = output TD = direct acting input TR S = air supply For more detailed information on applications, refer to page I-23 in the Engineering section.
21 Air Supply Normal... Maximum... Ambient Temperature Range Operating... Storage... Hysteresis... Relief Valve Differential... Air Capacity... Air Consumption (max.)... Mounting... Spring Adjustment Range Action... Supply Air Normal... Maximum... Shipping Weight... Description Part No
22 either of two other ports. most applications Typical Connections For more detailed information on applications, refer to page I-23 in the Engineering section.
23 Maximum Instrument Air Supply... Changeover Range... Standard Changeover Setting... Changeover Differential (nominal)... Ambient Temperature Maximum... Minimum... Air Connection... 1/8" NPT Adjustable Changeover Range... Changeover Differential... Standard Changeover Settings... Nominal 2 psi P scim scim Shipping Weight... Description Part No. Switching Relay
24 acting schedule required by a particular application. greater than the spring setting. Signal Reverse Acting Relay Application: The relay Signal Inverting Application: on a coil used for both heating and cooling. The output pressure is directly proportional to the input pressure until Typical Input/Output Drawings Reverse Acting Relay Application Input S1 Input B Signal Inverting Application Input S1+M Output B pressure causes in output pressure. The output pressure is directly proportional to the input pressure until one-half the spring setting proportional to the input until the Key B Output Pressure M Supply Air S1 Input Pressure S2 Not Used SP Spring Setting
25 Operating Range... Adjustment Using 5/64" (2 mm) Hex Wrench Maximum Ambient Temperature... Maximum Air Pressure... Air Capacity... Air Consumption for Air Compressor Sizing... Material... Air Connections... Mounting...Mounting bracket included Shipping Weight... Description Part No
26 Pressure Signal Selector, is used in pneumatic control systems to compare pressure signals. where two proportional high capacity air signals (2-pipe Recommendation Typical Connections Input Signal 2 Input Signal 1 Output Signal 3 psi 15 psi 15 psi 15 psi 3 psi 15 psi 9 psi 9 psi 9 psi
27 Action... Direct Maximum Air Pressure... Adjustments...None Connections... Description Part No If inoperative, replace the unit. Operating Ambient Temperature Minimum... Maximum... Air Consumption...None Air P = 2 psi... Materials... Shipping Weight... Highest of the Three Signal Pressures. Single Fan Cooling Control from Two Zone Direct Acting Thermostats.
28 control systems. Selects both or highest/lowest signal Easily supported in-line or mounted using Small, lightweight where up to six input air signals must be compared and the lowest and/or highest of the signals transmitted to must be connected to the highest numbered input port an amplifying relay will be required for many applications. Application Drawing Typical Connections Input Port # Input Signal Lowest Pressure Output Signal Highest Pressure Output Signal 1 3 psi 2 6 psi 3 9 psi 3 psi 15 psi 10 psi 5 13 psi 6 15 psi
29 Action... Direct Air Supply Pressure Normal Operating... Maximum... Adjustments...None Connections... Operating Ambient Temperature Minimum... Maximum... Air Consumption... Air P = 2 psi Material... Shipping Weight... Description If inoperative, replace the unit. Part No
30 control systems. two input air signals must be compared and the lowest of be used as a direct acting amplifying relay. Application Drawing Direct Acting Amplifying Relay. Typical Connections
31 Action... Direct Maximum Pressure... Adjustments...None Connections... Operating Ambient Temperature Minimum... Maximum... Air Consumption... Air P = 2 psi... Material... Diaphragm... Nylon reinforced fairprene Mounting... Shipping Weight... Description If inoperative, replace the unit. Part No Input Signal 2 Input Signal 1 Output Signal 3 psi 15 psi 3 psi 15 psi 3 psi 3 psi 9 psi 9 psi 9 psi Lowest of Three Signal Pressures.
32 and operating span actuator in response to a control air signal change. Damper actuators that are equipped with a Positioning Relay can use full control air pressure at any point in opposite direction.
33 Ambient Temperature Range Operating... Storage... Maximum Pilot Signal Pressure... Maximum Supply Air Pressure... Start Point Adjustment Range... Operating Span Adjustment Range... Response... Air P... Air Consumption... Air Connections... 1/8" NPT Materials...Zinc... Steel Shipping Weight (with mounting kit)... Part No. Description Positioning Relay Mounting Kit Positioner inch Valve Actuator inch Valve Actuator Ordering Note: 1. Relay and mounting hardware included
34 mounting directly on equipment control of output pressure for troubleshooting and emergencies reduce cost gauge included Options switch position and output pressure
35 Supply Voltage... Power Consumption... Input Signal/Impedance... Output Signal... Output Capacity... Output Repeatability... Output Fail-safe... Output Fail-safe Exhaust Capacity... to sustained power loss Air Supply Pressure... safe pressure, clean, dry, Air Consumption for Compressor Sizing... Tubing Connection... Conduit Connections... Remote mount model has Output Accuracy... Ambient Temperature Range Operating and Storage... Operating Humidity... Vibration... Override Controls... Override Monitoring... Hand-Auto Override... Override Monitoring Output Pressure... signal monitors output pressure Dimensions Remote Mount... Description Part No. Remote Mount Panel Mount Panel Mount... Shipping Weight AO-P Transducer with Integral Enclosure 545 AO-P Transducer
36 PRODUCT PAGE # All Products Clamp G-38 SW786 Selector Switches Mounting Kits G-38 Replacement Parts G-38 SW141 Switches Mounting Kits G-38 SW269 Static Pressure Switches Static Pressure Probe Kit G-38
37 All Products Description Product Group Quantity Part No. Pneumatic Spring Clamp. All SW786 Selector Switches Flush Mounting Bracket. SW /16" NPT Pipe Plug. SW Clear Bezel. SW M SW141 Switches Flush Mounting Bracket. SW SW269 Static Pressure Switches Static Pressure Probe Kit. SW Pressure Probe Kit. SW
38
Powers TM Controls SW 141 Differential Static Airflow Switches
Powers TM Controls SW 141 Differential Static Airflow Switches Document No. 155-052P25 SW 1 0518 Description The SW 141 Airflow Switch senses static differential pressure and the diaphragm operated snap
Powers TM Controls SW 134 Pressure Electric Switch (Adjustable Differential)
Powers TM Controls SW 134 Pressure Electric Switch (Adjustable Differential) Document No. 155-050P25 SW 134-3 Description The SW 134 Pressure Electric Switch actuates electrical circuits from pneumatic
Powers TM Controls RL 243 SW Switching Relay
Powers TM Controls RL 243 SW Switching Document No. 155-040P25 RL 243-4 Description The Powers 243 SW Switching is a two-position, pilot-operated auxiliary device used for switching a common part from
Distributed By: M&M Control Service, Inc PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE #
PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE # Pneumatic Receiver-Controllers Single Input Receiver-Controller RC 195 155-119P25 C-3 Multiple Input Receiver-Controller RC 195 155-036P25 C-5 Pneumatic Transmitters
POWERS CONTROL RC 195 Multiple Input Receiver- Controller
POWERS CONTROL RC 195 Multiple Input Receiver- Controller Document No. 155-036P25 RC 195-1 Description Features Application The RC 195 Multiple lnput Receiver-Controller is a pneumatic instrument which
POWERS TM CONTROLS LC Pneumatic Damper Actuator
POWERS TM CONTROLS Document No. 155-030P25 AP 331-4 Description Features The LC Actuator is a piston type pneumatic actuator. Air pressure is supplied to both sides of the piston to provide a force balance
Distributed By: M&M Control Service, Inc Product Product Code Technical Instructions Page #
Table of Contents Product Product Code Technical Instructions Page # Pneumatic Air Station Equipment 201/656/908 155-005/049/086/137P25 H-3 Pressure Gauges GA142AP 155-025P25 H-7 External Restrictors 184
Powers TM Controls Three-way Electro-pneumatic (EP) Valve Model 2
Powers TM Controls Three-way Electro-pneumatic (EP) Valve Model 2 Document No. 155-078P25 VE 265-2 Description The VE 265 Electro-Pneumatic Valve is a general purpose, electrically operated, twoposition
Pneumatic Controls. Pneumatic Controls Sections
Pneumatic Controls Pneumatic Controls Sections Controllers and Switches Thermostats Relays Sensors and Transmitters See the Contents Section at the front of the Product Catalog for the complete data sheet
Type Type 1001 Transducers. I/P & E/P Transducers
Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
Powers Controls RL 147 Positioning Relay
Powers Controls Technical Instructions Document No. 155-038P25 RL 147-2 Description Features Rapid response Product Numbers See Table 1. The is a compact, pneumatic device designed to provide positive
Air Pressure Sensing Switch with Adjustable Set Point Range. Dimensions in Inches (Millimeters)
Cleveland Controls Division of UniControl Inc. Model AFS 222 Air Pressure Sensing Switch with Adjustable Set Point Range Application The Model AFS-222 is a general purpose proving switch designed for HVAC
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Auxiliary Equipment. Table of Contents. Auxiliary Equipment H-1. Product Product Code Technical Instructions Page #
Table of Contents Product Product Code Technical Instructions Page # Pneumatic Air Station Equipment 201/656/908 155-005/049/086/137P25 H-3 Pressure Gauges GA142AP 155-025P25 H-7 External Restrictors 184
N-1001 Economizer Logic Network
24-7074- 6, Rev. A N-1001 Economizer Logic Network Product Bulletin N-1001 Issue Date 0316 Features Choice of O.A. Dry Bulb Economizer, Differential Temperature Economizer, or Enthalpy Economizer cycles
Terms. Direct Acting (DA) The action of a controller that increases its branch line pressure as the controlled variable increases
Pneumatic Control Terms Direct Acting (DA) The action of a controller that increases its branch line pressure as the controlled variable increases Terms Reverse Acting (RA) The action of a controller that
Remote Temperature Controllers. Quick Selection Guide
Remote Temperature Controllers Quick Selection Guide A Complete Selection For A Wide Range Of Applications Electronic Standalone Controllers T775 Provide on/off, modulating, or reset control in applications
Zone Valves and Parts (Honeywell)
28/11/14 B49 Zone Valves - Two Way Fan Coil Zone Valves and Parts (Honeywell) Two-way Fan Coil Valve, the VU53 high pressure zone valves are used to control the flow of hot or chilled water in commercial
TK-6024, TK-6124, TK-8024, TK-8124
TK-6024, TK-6124, TK-8024, TK-8124 Pneumatic Bulb Thermostats General Instructions APPLICATION For proportional temperature control of pneumatic valves and actuators to maintain air or liquid temperatures
Table of Contents. Proportional & Precision Regulator Instrumentation
Table of Contents Proportional & Precision Regulator Instrumentation...3-27 Features and Benefits... 3 Electropneumatic Transducer...4-5 Economy Miniature Electropneumatic Transducer...6-7 Miniature Electropneumatic
T-1001 TYPE 1001 I/P & E/P TRANSDUCERS
TYPE 1001 I/P & E/P TRANSDUCERS T-1001 The Type 1001 is a patented family of electro-pneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
SECTION CONTROL VALVE ACTUATORS
SECTION 23 09 13.34 - CONTROL VALVE ACTUATORS PART I GENERAL 1.0 OVERVIEW [Background for PSC] A. Control Valve/Actuator Applications 1. See Exhibit 23 09 13.33-1, Control Valve/Actuator Worksheet for
RDN4 - RDN8 Differential pressure switch
Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Applications Power generation safety equipment Pressurized chambers control Liquid level control
Technical Data Sheet FT & FIT-1003 SERIES AIR VOLUME/ VELOCITY TRANSDUCERS. Features DESCRIPTION
Technical Data Sheet FT & FIT-1003 SERIES AIR VOLUME/ VELOCITY TRANSDUCERS DESCRIPTION FT & FIT-1003 Series transducers include Models FT-1003, FT-1003-ZV, FIT-1003-D, FIT-1003-DZV, FIT-1003-M, and FIT-1003-MZV.
Precision Regulators.
Precision www.numatics.com Table of Contents Features and Benefits 3 Electropneumatic Transducer 4-5 Economy Miniature Electropneumatic Transducer 6-7 Miniature Electropneumatic Transducer 8-9 Precision
P70, P72, and P170 Controls for Low Pressure Applications
Master Catalog 125 Pressure Controls Section P Product/Technical Bulletin Issue Date 0900 P70, P72, and P170 Controls for Low Pressure Applications The P70, P72, and P170 controls for low pressure applications
CP-8551 & CP Application. Features. Applicable Literature. Electronic to Pneumatic Transducers General Instructions
CP-8551 & CP-8552 Electronic to Pneumatic Transducers General Instructions Application The CP-8551 and CP-8552 transducers receive a variable electronic input signal and produce a 3 to 15 psig (21 to 103
ITT Conoflow Process Control Solutions
ITT Conoflow Process Control Solutions Process Control Solutions About ITT Conoflow Under the ITT Conoflow brand, ITT is a market-leading manufacturer of Instruments and Controls for the various segments
System 350 P352AB Electronic Pressure Control Series
System 350 P352AB Electronic Pressure Control Series System 350 Product Guide 930 Basic Controls Section Product/Technical Bulletin P352AB Issue Date 0200 The P352AB controls are On/Off electronic pressure
Actuators & Positioners Pneumatic Actuators Series UP1/2/3/4/5/6
Data Sheet Actuators & Positioners Pneumatic Actuators Series UP1/2/3/4/5/6 Wide Range of Torque Ratings - Six actuator sizes available in ratings from 122 to 6372 Newton meters (90 to 4700 foot-pounds)
D-4070 Two Stage Pneumatic Actuator
FANs 268.1, 1628.3 Product/Techncial Bulletin D4070 Issue Date 1095 D-4070 Two Stage Pneumatic Actuator The D-4070 Two Stage Pneumatic Actuator is a multipurpose positioning device used to accurately position
Damper Actuator Installation
FANs 268.1, 977, 1628.3 Installation Bulletin EPP-1000 Issue Date 0800 EPP-1000 Series Electro-Pneumatic Positioners A pplication The EPP-1000 is designed for applications where electronic control of pneumatic
Powers Controls No. 6 Pneumatic Damper Actuator
Document No. 152-013P25 Powers Controls No. 6 Pneumatic Damper Actuator OEM Literature Basic Actuator Typical Actuator with Clevis and Pin Actuator with Extended Shaft and Frame Mounting Accessories Description
Controllers & Transmitters
Table of Contents Controllers & Transmitters Product Product Code RESOURCE DOCUMENTS Page # Electronic Temperature Controllers Universal Controllers RWD 155-736/737/738 C-3 Temperature Controllers Refrigeration
RPPN6 - RPPN8 Industrial pressure switch with high overpressure resistance
Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Overpressure up to 100 bar Applications Energy safety equipment Power generation safety equipment
POWERS Controls. Technical Instructions Document No P25 AP December 3, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 331-2793 Actuator 331-2857 Actuator with Clevis and Pin 331-3012 Extended Shaft and Frame Mounting Description The POWERS
DWYER INSTRUMENTS, INC. Phone: 219/ P.O. BOX 373 MICHIGAN CITY, IN 46361, U.S.A. Fax: 219/
Series 43000 Capsu-Photohelic Pressure Switch/Gage Specifications - Installation and Operating Instructions Bulletin B-34 Ø4-3/4 [120.65] 3-7/8 SQ [98.43] 3/4 CONDUIT 4-3/8 [111.13] HOUSING REMOVAL 3-1/16
P70, P72 and P170 Series Controls for High Pressure Applications
Installation Instructions P70 Issue Date October 16, 2002 P70, P72 and P170 Series Controls for High Pressure Applications Application P70, P72 and P170 Series Controls for High Pressure Applications provide
Laboratory Room Controller
Technical Specification Sheet Rev. 5, April, 2001 Laboratory Room Controller Description The APOGEE Automation System Laboratory Room Controller (LRC) provides Direct Control (DDC) for laboratory space
ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Lecture 4 Motor Control Devices
ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Part 1. Manually Operated Switch Part 2. Mechanically Operated Switch Text Book: Electric Motors and Control Systems, by Frank D.
CAPSU-PHOTOHELIC PRESSURE SWITCH/GAGE*
CAPSU-PHOTOHELIC PRESSURE SWITCH/GAGE* Specifications - Installation and Operating Instructions Bulletin B-34 Series 43000 CAPSU-Photohelic Switch/Gage The CAPSU-Photohelic Switch/Gage is a most versatile,
V-9502 Series Pneumatic Valve Actuator Positioners
P O S 14-365- 6, Rev. F Installation Instructions V-9502 Issue Date February 2016 V-9502 Series Pneumatic Valve Actuator Positioners Application V-9502 Series Pneumatic Valve Actuator Positioners are precision
EP-8000 Series Electro-Pneumatic Transducers
FANs 216, 1628.3 Product/Technical Bulletin Issue Date 1196 eries Electro-Pneumatic Transducers eries Electro-Pneumatic Transducers convert a voltage or current signal from an electronic controller into
T PI Receiver-Controller
T-5800 Pneumatic Receiver-Controller Pneumatic Control Manual 717.1 Receiver-Controllers Section Product Bulletin T-5800 Issue Date 0386 Features High Volume Output Field Programmable Action and Readjustment
Powers Controls No. 4 Pneumatic Damper Actuator
Document No. 152-012P25 Powers Controls No. 4 Pneumatic Damper Actuator OEM Literature Pivot Mount Actuator with Clevis, Clevis Pin, and Hitch Pin Clip Actuator with Fixed Bracket Mounted Actuator with
RPPN3 - RPPN7 Industrial pressure switch
Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Applications Energy safety equipment Power generation safety equipment Pressurized chambers
Flowrite Globe. Pneumatic 4-inch Valve Actuator. Valves. Description. Applications. Features D-141.
Flowrite Globe Pneumatic 4-inch Valve Actuator Flowrite 4-inch Pneumatic Valve Actuator. Designed for use with the Flowrite valves, the Flowrite 4-inch Pneumatic Valve Actuator has a 3/4-inch (20 mm) stroke
LF Series Spring Return Direct Coupled Actuator
LF Series Spring Return Direct Coupled Actuator Minimum in-lb torque LF actuator For damper areas up to 8 sq-ft* Applications Cost effective quality and performance for a range of applications including:
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator Technical Instructions Document No. 155-161P25 AP 599-1 Description Features Application The Flowrite AP 599 Series 8-inch pneumatic valve actuator
SECTION AIR TERMINAL UNITS
SECTION 23 36 00 AIR TERMINAL UNITS PART 1 - GENERAL 1.1 SUMMARY A. Section includes constant volume terminal units, variable volume terminal units, dual duct terminal units, fan powered terminal units,
Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
Laboratory Exhaust Air Terminal
Document No. 546-00335 Laboratory Exhaust Air Terminal Product Description The Laboratory Exhaust Terminal (LGE) is a onepiece flow control device used to vary airflow through an exhaust duct. See Figure
DOROT CONTROL VALVES CATALOGUE
DOROT CONTROL VALVES CATALOGUE Content SERIES 80 Globe & Angle Irrigation Valves 4 SERIES 80 80-1, 80-3/4 Turf Irrigation Valves 6 SERIES 75 Gal Plastic Valves 8 SERIES 95/96 UPVC Valves 10 Plastic Control
20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves
VFB30 Series Issue Date February 1, 2016 20 to 150 mm 2-Way Automatic Flow Balancing Control Ball Valves Low Torque Facilitates the use of smaller, less expensive directmount rotary-motion actuators Extends
PNEUMATIC CONTROL SYSTEMS DESIGN AND CONSTRUCTION STANDARD PART 1 - GENERAL. A. Codes and Standards that are Standard at the University:
PART 1 - GENERAL 1.01 Purpose: A. This design guideline contained here in includes the requirements for pneumatic control systems at The University of Texas at Austin. It is the intent to provide the highest
MP-5400 Series. Application. Features. Applicable Literature. Electronic Positive Positioning Hydraulic Actuator General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com MP-5400 Series Electronic Positive Positioning Hydraulic Actuator General Instructions Application The MP-5400 Series Actuators
PERFORMANCE DATA TYPICAL FIELD WIRING CERTIFIED DIMENSION PRINTS CERTIFIED ROOF CURB DIMENSION PRINTS
50FP-1SB 50FP034, 038, 044, 048, 054, 064, 074 SINGLE-PACKAGE COOLING UNITS CONSTANT/VARIABLE VOLUME PRODUCT INTEGRATED CONTROLS CARRIER COMFORT NETWORK COMPATIBLE FACTORY-INSTALLED OPTIONAL ELECTRIC HEAT
Powers TM Controls RL 243 SW Switching Relay
Powers TM ontrols RL 243 W witching ocument No. 155-040P25 RL 243-4 escription The Powers 243 W witching is a two-position, pilot-operated auxiliary device used for switching a common part from one pneumatic
January 2007 Approval Guide Fixed Extinguishing Systems 5-57
Fixed Extinguishing Systems 5-57 CHEMETRON Fire Systems, 4801 Southwick Dr, 3rd Floor, Matteson IL 60443 High Pressure System Equipment. Automatic Actuator. 1-026-02, -0250. Alarm. 1-003-0033, -0070, -0071,
VEP-11/12/21/22 Series
VEP-11/12/21/22 Series 2-Way, Fail-Safe, Electric, Zone Control Valves (1/2, 3/4, & 1") Description These zone control valves are designed to regulate the flow of hot or chilled water to VAV terminal unit
Becker Precision Equipment
Becker Precision Equipment HPP-SB Series Pneumatic Valve Positioner HPP-SB Pneumatic Positioners Provide Accurate Positioning of Single-Acting Actuated Control Valves Description The Becker Model HPP-SB
Numatics 2003 Rev. 11/03 PDFPRECISION-1
......................................................3-18 Features and Benefits..............................................................................3 Precision Regulator.............................................................................4--5
Features and Benefits
......................................................3-18 Features and Benefits..............................................................................3 Precision Regulator.............................................................................4--5
POWERS TM CONTROLS SW 786 Selector Switch
POWERS TM CONTROLS SW 786 Selector Switch Document No. 155-062P25 SW 786-1 Description The SW 786 Selector Switches are designed to deliver, stop, or redirect a pneumatic signal to air operated control
100% OUTSIDE AIR MAKE-UP UNITS WITH DISCHARGE TEMPERATURE CONTROL & c.pco DIRECT DIGITAL CONTROL MODULE
100% OUTSIDE AIR MAKE-UP UNITS WITH DISCHARGE TEMPERATURE CONTROL & c.pco DIRECT DIGITAL CONTROL MODULE Start-up must be performed by a trained, experienced service person. The following general start-up
SINGLE-ACTING ACTUATORS FOR DOUBLE-ACTING & SERIES 65 POSITIONERS PNEUMATIC & ELECTRO-PNEUMATIC. The High Performance Company
POSITIONERS PNEUMATIC & SERIES 65 FOR DOUBLE-ACTING & SINGLE-ACTING ACTUATORS The High Performance Company SERIES 65 FEATURES The Brayline Series 65Pneumatic and Electro-Pneumatic Positioner feature modular
VAV Terminal Unit Control Package
VAV Terminal Unit Control Package Model CP-133-STK Pneumatic Pressure Independent, VAV Cooling, Constant Volume Heating at Min CFM set point. This actuator/controller will accommodate Direct or Reverse
RETROFIT TERMINAL UNITS
GENERAL PROUCT OVERVIEW Retrofit Terminal s Convert Constant Air Volume Systems to Variable Air Volume. Convert Constant Volume ual uct Systems to Variable Air Volume. Convert Multizone Systems to Variable
V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
Type Type I/P & E/P Transducers
Type 1500 I/P & E/P Type 1500 Description Principle of Operation (ee Fig. 2 and 6) The T-1500 Transducer is a force balance device in which a coil is suspended in the field of a magnet by a flexure. Current
LF Series At A Glance
LF Series Spring Return Direct Coupled Actuator Minimum 35 in-lb Torque For damper areas up to 8 sq-ft* Applications Cost effective quality and performance for a range of applications including: Classroom
Mount directly to 1.05 jackshafts. (new ZG-120 bracket shown) EFB24-S N4, EFX24-S N4(H) EFB24-S, EFX24-S (p. 21)
EFB and EFX Series Spring Return Direct Coupled Actuator Minimum 70 in-lb Torque For damper areas up to 66 sq-ft* (For lower torque, see AFB, AF, NFB, LF, or TF series) Applications New standard clamp
Hardware Installation. Tracer AH541 Version 2 Air-Handler Controller CNT-SVN02B-EN
Hardware Installation Tracer AH541 Version 2 Air-Handler Controller CNT-SVN02B-EN Hardware Installation Tracer AH541 Version 2 Air-Handler Controller CNT-SVN02B-EN February 2004 CNT-SVN02B-EN Tracer AH541
2211 Series. Application. Features. One-Pipe Pneumatic Room Thermostats General Instructions SPECIFICATIONS
TAC 1354 Clifford Avenue P. O. Box 940 Loves Park, IL 6113-940 www.tac.com 11 Series One-Pipe Pneumatic Room s General Instructions Application The 11 Series Pneumatic Room is designed for proportional
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT SERIES Features Direct mount Full Port 316 Stainless Steel ball valve 3-piece swing out body designed for easy maintenance
Models UP1/2/3/4/5/6/7 Universal pneumatic rotary actuators. Measurement made easy. High performance actuators for precision damper control
Data sheet DS/A/UP EN Rev K Models UP1/2/3/4/5/6/7 Measurement made easy High performance actuators for precision damper control Wide range of torque ratings Seven actuator sizes available in ratings from
Metasys Zoning Package Installation
Technical Bulletin Issue Date August 28, 2002 Metasys Zoning Package Installation Metasys Zoning Package Installation...2 Introduction... 2 Key Concepts... 3 Installation Overview... 3 Metasys Zoning Package
The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T5220 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
P445 Series Electronic Lube Oil Control
FANs 125, 121 s Section P Product/Technical Bulletin P445 Issue Date 0100 P445 Series Electronic Lube Oil The P445 Series Electronic Lube Oil is designed for use on refrigeration compressors equipped with
AK Application. Features. Applicable Literature. Positive Positioner Pneumatic Relay General Instructions
TAC 1354 Clifford Avenue P. O. Box 2940 Loves Park, IL 61132-2940 www.tac.com Positive Positioner Pneumatic Relay General Instructions Application The Positive Positioner Pneumatic Relay is used to accurately
SECTION HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY. A. Section Includes:
SECTION 15970 HVAC CONTROL SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Thermostats, temperature transmitters, controllers, automatic valves, dampers, damper operators, pneumatic/ electric
Powers Controls Powertop Two-Way Valves Normally Open
Powers Controls Powertop Two-Way s Normally Open VP 658-5 Description The VP 658 normally open valves are pneumatically operated valves designed to control the flow of both water and steam. Features Stainless
4 x 0-10Vdc Channels Fused 24V o/p terminals for actuator power Direct or buffered output signals
IO Input/Output Modules IO-ABM4 Analogue Override Module Description IO-ABM4 Analogue Override Module Intended for applications which require independent manual override of analogue output channels from
FSAF24(-S) US, FSAF120(-S) US
FSAF4(-S) US, FSAF10(-S) US On/Off, Spring Return, Meets 50 F [11 C] for Half Hour, 75 Seconds Torque min. 133 in-lb, for control of air dampers Technical Data FSAF4(-S) US, FSAF10(-S) US Power supply
How to Select the RE Industrial Actuator Part Number
How to Select the RE Industrial Actuator Part Number RE 10 T F 2 Torque (in-lb) 1.5 150 3 300 6 600 8.5 850 10 1000 15 1500 20 2000 25 2500 30 3000 Reversing Electronic Torque Maximizer (optional) Increases
Paddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
Fan Powered Low Profile Variable Volume Terminal Units
MANUAL INSTALLATION Fan Powered Low Profile Variable Volume Terminal Units FEVLP / FPVLP / FDVLP Series v001 Issue Date: 07/19/16 07/19/16 Price Industries Limited. All rights reserved. TABLE OF CONTENTS
Simple Set COMMERCIAL. Pressure Independent Control Valves 2 Way 1/2-2 02/16/18 COMMERCIAL
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control
Pneumatics, Automation & Control Solutions
www.baccara-geva.com 500 series hydraulic control valves 500 Series hydraulic control valves general 500 series valves are direct diaphragm closing automatic hydraulic control valves which work with line
Actuators & Positioners Models UP1/2/3/4/5/6/7. Universal Pneumatic Rotary Actuators
Data Sheet D-A-UP_G Actuators & Positioners Models UP1/2/3/4/5/6/7 Universal Pneumatic Rotary Actuators Wide Range of Torque Ratings Six actuator sizes available in ratings from 122 to 7320 Newton meter
SAX Electronic Valve Actuator
SAX Electronic Valve Actuator Non-spring Return, 24 Vac, Proportional Control Technical Instructions Document No. 155-506 Description The SAX Non-spring Return (NSR), Electronic Valve Actuator requires
Miniature I/P, E/P Transducer for Electronic Air Pressure Control
Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control The Type-900X I/P, E/P transducer converts an electrical signal (current or voltage) to a proportional
MF-22xx3. Application. Features. Floating Valve Actuator General Instructions
MF-22xx3 Floating Valve Actuator Application The Floating Valve Actuator is a non-spring return actuator used with floating DDC controllers and standard /2" to -/4" two-way and three-way valve bodies for
MS Application. Features. Proportional Valve Actuator General Instructions
Proportional Valve Actuator Application The Proportional Valve Actuator is a non-spring return actuator used with proportional to 10 Vdc or 4 to 0 ma controllers and standard 1/" to 1-1/4" two-way and
P70, P72, and P170 Series Controls for High Pressure Applications
Installation Instructions P70 Issue Date 0918 P70, P72, and P170 Series Controls for High Pressure Applications Application P70, P72, and P170 Series Controls for High Pressure Applications provide high-side
Actuated Valves PRICING
Electric & Pneumatic Actuated Valves Actuated Valves PRICING Page Suitable for Oil-Free air handling to 5 psi, not for distribution of compressed air or gas Spears Manufacturing Company Due to Material
Miniature I/P, E/P Transducer for Electronic Air Pressure Control
Type 900X Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control Available with zero-based ranges The Type-900X I/P, E/P transducer converts an electrical