10LF and 12LF Series Right Angle Grinder and Sander

Size: px
Start display at page:

Download "10LF and 12LF Series Right Angle Grinder and Sander"

Transcription

1 Product Manual LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at

2 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX Tool Series 0 = Aluminum Housing = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right Angle Speed Options (RPM) Front Exhaust Rear Exhaust 00 =,000 0 =,000 0 = 20,000 = 20,000 Primary Termination Code 32 = /4-2 Threaded Spindle 3 = 300 Series /4" Capacity Collet (3 piece) Extended Termination Code B = Belt Sander (/4" x ") B2 = Belt Sander (/2" x ") B3 = Belt Sander (/2" x 24") B4 = Belt Sander (" x ") B = Belt Sander (" x 24") Options Optional Collets Page 2

3 Dotco Product Information 4-42 The original language of this manual is English. Product Safety Information: Intended Use: This pneumatic material removal tool is to be used only for removing material by utilizing appropriate abrasive wheels, rotary files or other material removal cutting devices. For product safety information and requirements for grinding without a wheel guard refer to Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG documents: GS-200, General Safety Pneumatic Grinders CE-20, General Safety Sanders WARNING This product must not be modified in any manner unless approved in writing by Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG. All safety devices must be properly installed and maintained in good working order. EC Declaration of Conformity: We affirm that this machine is in accordance with the following EC regulations (200/42/EC). Applied harmonized standards are ISO 00:200-. The name, job function and address of the person authorized to compile the technical file. Mr. Vishnu Irigireddy Director of Global R&D- Mechanical Engineering Apex Tool Group 0 Industrial Drive Lexington, SC 202 Signature: Vishnu Irigireddy Date: December, 20 Noise and Vibration: 0LF Series Noise Level: db(a) LF Series Noise Level: db(a) 0LF Series Vibration Level: < 2. m/s 2 LF Series Vibration Level: < 2. m/s 2 Air Line Lubrication: Use Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG s lightweight air tool oil 000 (available in quantities shown in the following chart) or an SAE- lightweight spindle oil. Part No. Packaged Designation 403 Quart (0.4 liter) Airlube 0W/NR-420LB DR 334 US Gallon (3. liter) Airlube 0W/NR-420LB DR Grease: Part No. Packaged Designation oz. (0.0 kg) Angle Head: Moly-XL SAE oz. (0.0 kg) Planetary: Magnalube-G oz. (0.4 kg) Planetary: Magnalube-G Air Supply Line: Parameter Air Hose Minimum inside diameter: /4" (,4 mm) Maximum length:.0' (2,4 m) Air Pressure Recommended: 0 psi (20 kpa) Air quality according to ISO 3-, quality Compressed air class The compressed air must be clean and dry. Service and Repair: Tool service and repair should be performed by an authorized Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG Center. Refer to the last page of this manual for locations. Disposal: Observe local disposal guidelines for all components of this tool and its packaging. Copyright Protection: Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express permission of Apex Tool Group, LLC or Apex Tool Group GmbH & Co. OHG Page 3

4 4-42 Dotco Front Exhaust Models A 3 0 Models 0LF200-0LF20- LF200- LF LF Series LF Series Page 4

5 Dotco Front Exhaust Models 4-42 Illustration "A": Front Exhaust Models Inlet Adapter PT 3 Filter Exhaust Plug 4 303PT 3 O-Ring 2 3 O-Ring 0-3 Spring 0- Poppet Valve Valve Seat Table "A" Housing Lockoff Lever Assembly Shaft Pin Governor Valve 00 2 Ball Bearing 002 Rear End Plate 0 Cylinder (includes Ref. ) Cylinder Pin Rotor 00 4 Rotor Blade 20 0PT Spacer Front End Plate Ball Bearing 23 Table "A" Gear Set Label Label Cover Muffler Element Lock Ring O-Ring (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "A" Ref. # 0LF200- # LF200- # 0LF20- # LF20- Housing Gear Set Page

6 4-42 Dotco Rear Exhaust Models B 0 Models 0LF20-0LF2- LF20- LF LF Series LF Series Page

7 Dotco Rear Exhaust Models 4-42 Illustration "B": Rear Exhaust Models Inlet Adapter PT 3 Filter Diffuser Spring 0- Poppet Valve Valve Seat Table "B" Housing 0-2 Lockoff Lever Assembly Shaft Pin Governor Valve 00 2 Ball Bearing 002 Rear End Plate 0 Cylinder (includes Ref. ) Cylinder Pin Rotor 00 4 Rotor Blade 0PT Spacer Front End Plate Ball Bearing Table "B" Gear Set Label Label Cover Seal Lock Ring O-Ring (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "B" Ref. # 0LF20- # LF20- # 0LF2- # LF2- Housing Gear Set Page

8 4-42 Dotco Angle Attachment C Termination 32 Termination 3 Page

9 Dotco Angle Attachment 4-42 Illustration "C": Angle Attachment Angle Head Cover 2 024PT Angle Head Housing (includes Ref. 3-4) 3 3PT 2 Grease Fitting 4 PT Wear Ring 04PT 3 Ball Bearing PT 3 Lubricator Disc Table "C" Gear Set 03-2 Ball Bearing 02PT Spindle (Termination -3) 0 0 Spindle (Termination -32) 02PT 3 Key 02PT Lock Ring Table "C" Series Collet 20PT 3 Nosepiece Cap 203PT 3 O-Ring -00 /" Wrench -0 /" Wrench (Termination -3) Gear Lube (2 oz.) 4-2 Grease Gun (X) Recommended Spare Parts (quantity shown based on - tools in operation) Table "C" 0LF200-0LF20- Ref. # LF200- LF20- # 0LF20-0LF2- LF20- LF2- Gear Set Table "C" 300 Series Optional Collets Part No. Arbor Size Part No. Arbor Size Part No. Arbor Size 30PT 3/4" 30PT /32" 30PT mm 302PT /4" 30PT 3/" 303 3/32" 30PT * /4" 304PT /" 3 3mm * Standard Collet Page

10 4-42 Dotco Extended Terminations D Termination -B (/4 x Belt Sander) Page 0

11 Dotco Extended Terminations 4-42 Illustration "D" - Belt Sander Termination B -- -3S Belt Sander Assembly (includes Ref. -) - Guard 2 22PT Screw 3 - Spacer 4 - Boom 00PT 2 4 Screw 33PT Pin -43 Cushioned Platen 04PT 2 Yoke Spring - Yoke 0 3PT Yoke Pin Wheel Assembly (includes Ref. -) 4PT 2 Ball Bearing -04 Wheel (includes Ref. ) - 3 Tire - 2 Spacer -0 Drive Wheel (32B Termination) (includes Ref. ) -0 Drive Wheel (3B Termination) (includes Ref. ) Tire - Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page

12 4-42 Dotco Extended Terminations E Termination -B2 (/2 x Belt Sander) F Termination -B3 (/2 x 24 Belt Sander) Page

13 Dotco Extended Terminations 4-42 Illustration "E" - Belt Sander Termination B S Belt Sander Assembly (includes Ref. -) - Guard 2 22PT Screw 3 - Boom 4-3 Steel Platen 02PT 2 4 Screw 00PT 2 4 Screw 0 4 Nylon Washer 33PT Pin -3 Cushioned Platen 0 04PT 2 Yoke Spring - Yoke 03PT Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 2 4 Ball Bearing - Wheel (includes Ref. ) -0 3 Tire 4PT Spacer -0 Drive Wheel (32B2 Termination) (includes Ref. ) -0 Drive Wheel (3B2 Termination) (includes Ref. ) Tire 20-4 Sanding Belt (0 Grit) -2 Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Illustration "F" - Belt Sander Termination B3 -- -S Belt Sander Assembly (includes Ref. -) - Guard 2 22PT Screw 3-20 Boom 4 - Steel Platen 02PT 2 4 Screw 00PT 2 4 Screw 0 4 Nylon Washer 33PT Pin -4 Cushioned Platen 0 04PT 2 Yoke Spring - Yoke 03PT Yoke Pin -- - Wheel Assembly (includes Ref. -) 4PT 2 4 Ball Bearing - Wheel (includes Ref. ) -0 3 Tire 4PT Spacer -0 Drive Wheel (32B3 Termination) (includes Ref. ) -0 Drive Wheel (3B3 Termination) (includes Ref. ) Tire 20 - Sanding Belt (0 Grit) -2 Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page

14 4-42 Dotco Extended Terminations G Termination -B4 ( x Belt Sander) H Termination -B ( x 24 Belt Sander) Page

15 Dotco Extended Terminations 4-42 Illustration "G" - Belt Sander Termination B Belt Sander Assembly (32B4 Termination) (includes Ref. -22) Belt Sander Assembly (3B4 Termination) (includes Ref. -22) - Guard 2 - Guard 3 - Screw 4-4 Boom - Steel Platen 02PT 3 Screw Screw 0 Nylon Washer Cushioned Platen Yoke Spring - Yoke 3PT 2 4 Yoke Screw -303 Yoke Pin Wheel Assembly (includes Ref. -) 4PT 2 4 Ball Bearing - Wheel (includes Ref. ) -0 2 Tire - 2 Spacer 4PT 2 Spacer - Drive Wheel (32B4 Termination) (includes Ref. ) 20-0 Drive Wheel (3B4 Termination) (includes Ref. ) Tire 22-04PT Wrench (/") (not shown) 23-3 Sanding Belt (0 Grit) - Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Illustration "H" - Belt Sander Termination B Belt Sander Assembly (32B Termination) (includes Ref. -22) -- - Belt Sander Assembly (3B Termination) (includes Ref. -22) - Guard 2 - Guard 3 - Screw 4 - Boom - Steel Platen 02PT 3 Screw Screw 0 Nylon Washer Cushioned Platen Yoke Spring - Yoke 3PT 2 4 Yoke Screw -303 Yoke Pin Wheel Assembly (includes Ref. -) 4PT 2 4 Ball Bearing - Wheel (includes Ref. ) -0 2 Tire - 2 Spacer 4PT 2 Spacer - Drive Wheel (32B Termination) (includes Ref. ) 20-0 Drive Wheel (3B Termination) (includes Ref. ) Tire 22-04PT Wrench (/") (not shown) Sanding Belt (0 Grit) -4 Sanding Belt (0 Grit) (X) Recommended Spare Parts (quantity shown based on - tools in operation) Page

Parts Manual EN

Parts Manual EN Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4- Dotco Nomenclature X XX - XX XX XX OH Product

More information

10LF and 12LF Series Right Angle Grinder and Sander

10LF and 12LF Series Right Angle Grinder and Sander Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

12-10 Series Inline Grinder

12-10 Series Inline Grinder Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and

More information

Parts Manual EN PL /18/ L41 Series Inline Extended Grinders

Parts Manual EN PL /18/ L41 Series Inline Extended Grinders Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX

More information

Parts Manual EN

Parts Manual EN Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

Parts Manual EN

Parts Manual EN Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature

More information

15D Series Pistol Grip and Inline Drills

15D Series Pistol Grip and Inline Drills Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language

More information

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:

More information

10N10 Series Inline Grinder

10N10 Series Inline Grinder Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle

More information

75RM-2024 Right Angle Fixtured Nutrunner

75RM-2024 Right Angle Fixtured Nutrunner Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original

More information

10R90 Series Light Duty Precision Turbine Grinder

10R90 Series Light Duty Precision Turbine Grinder Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco

More information

10N M6 Series Right Angle Grinder

10N M6 Series Right Angle Grinder Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product

More information

N60 Rotary Vane Pneumatic Motor

N60 Rotary Vane Pneumatic Motor Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model

More information

14PTA & 14TTA Series Pistol Grip Nutrunners

14PTA & 14TTA Series Pistol Grip Nutrunners Parts Manual 4PTA & 4TTA Series Pistol Grip Nutrunners 4PTA Series 4TTA Series For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language

More information

Parts Manual EN

Parts Manual EN Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo

More information

88 Series Inline and Pistol Grip Screwdrivers

88 Series Inline and Pistol Grip Screwdrivers Parts Manual 823018EN 88 Series Inline and Pistol Grip Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823018EN Cleco Nomenclature 88 XXX A XX - X C X

More information

A6R-2221 Reversible Axial Piston Power Motor

A6R-2221 Reversible Axial Piston Power Motor Instruction Manual A6R-2221 Reversible Axial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall

More information

A6R-2218 Reversible Axial Piston Power Motors

A6R-2218 Reversible Axial Piston Power Motors Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall

More information

Parts Manual PL

Parts Manual PL Parts Manual PL30-027-7 45-828 03/0/20 0L27 & 0K27 Series Low Profile Right Angle Grinder/Sander 2 Series Handles Shown Throttle Type Free Speed (RPM) Grinders / Sanders Termination 2,000 3,500 4,500 Type

More information

B4R Series Reversible Axial Piston Power Motors

B4R Series Reversible Axial Piston Power Motors Instruction Manual B4R Series Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall

More information

21L1341 Series Inline Vent Trimmer

21L1341 Series Inline Vent Trimmer Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion

More information

35 Series Screwdrivers

35 Series Screwdrivers Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original

More information

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle) 80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander

More information

19RA Series Right Angle Nutrunner

19RA Series Right Angle Nutrunner Parts Manual P12-1014EN 19RA Series Right Angle Nutrunner For additional product information visit our website at http://www.apextoolgroup.com P12-1014EN Cleco Model Nomenclature A 19 R A X XX XX X Tool

More information

1700 and 1900 Series Horizontal Grinders

1700 and 1900 Series Horizontal Grinders Instruction Manual 823136EN 1700 and 1900 Series Horizontal Grinders For additional product information visit our website at http://www.apextoolgroup.com 823136EN Cleco General Information For this Instruction

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

12 L * OH**

12 L * OH** Parts Manual Ersatzteil--Liste 12L27.. series 0.9 hp ERGO Short Coupled Low Profile Grinders & Sanders 45--8175 TOOL CLASSIFICATION 12 = ERGO Grinder/Sander 12 L 2 7 12 27 08* OH** -- TYPICAL MODEL THROTTLE

More information

21 Series Double Reduction Rotary Vane Power Motors

21 Series Double Reduction Rotary Vane Power Motors Instruction Manual 45-8059EN Series Double Reduction Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com 45-8059EN Cleco General Information For

More information

48EP Series Electronically Controlled Pistol Grip Nutrunner

48EP Series Electronically Controlled Pistol Grip Nutrunner Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco

More information

Product Manual PL31-15LF 04/02/ LF Series Inline Grinders

Product Manual PL31-15LF 04/02/ LF Series Inline Grinders Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust

More information

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions 80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body

More information

Edition 4 August Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions

Edition 4 August Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions 04581229 Edition 4 August 2015 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder - Exploded View

More information

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015 Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN

More information

CP3650 Series CP AB & CP AB Angle Sanders

CP3650 Series CP AB & CP AB Angle Sanders 32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring

More information

14RA Series Right Angle Nutrunners

14RA Series Right Angle Nutrunners Parts Manual 822EN RA Series Right Angle Nutrunners For additional product information visit our website at http://www.apextoolgroup.com 822EN Cleco General Information anguage Version: This Parts Manual

More information

41NDR Series Air Shut-Off Ratchet Wrench

41NDR Series Air Shut-Off Ratchet Wrench Instruction Manual PL17EN-41NDR 41NDR Series Air Shut-Off Ratchet Wrench For additional product information visit our website at http://www.apextoolgroup.com PL17EN-41NDR Cleco General Information For

More information

Edition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions

Edition 9 March Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions 04581237 Edition 9 March 2015 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander - Exploded Diagram

More information

48EP Series Electronically Controlled Pistol Grip Nutrunner

48EP Series Electronically Controlled Pistol Grip Nutrunner Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General

More information

Edition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions

Edition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions 04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded

More information

20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)

20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp) 20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain

More information

Edition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions

Edition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions 48420558 Edition 2 October 2013 Air Die Grinder M2 Series Parts Information Save These Instructions M2 Series, Air Die Grinder - Exploded View (Motor & Motor Housing) 16 1 21 14 15 13 7 5 4 3 2 12 30 28

More information

Edition 3 March Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions

Edition 3 March Air Grinders and Air Die Grinders. G2 Series (Horizontal) Parts Information. Save These Instructions 04581229 Edition 3 March 2010 Air Grinders and Air Die Grinders G2 Series (Horizontal) Parts Information Save These Instructions G2 Series (Horizontal) Air Grinder and Air Die Grinder Exploded Diagram

More information

3,200 RPM Angle-Head WARNING

3,200 RPM Angle-Head WARNING Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.

More information

MA3W-2238 Radial Piston Power Motor

MA3W-2238 Radial Piston Power Motor Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum

More information

Disassembly Instructions hp. Dynafile II Models: 40352, 40353

Disassembly Instructions hp. Dynafile II Models: 40352, 40353 Disassembly Instructions - 0.4 hp. Dynafile II Models: 40352, 40353 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer

More information

Airetool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012

Airetool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012 Operating & Service Manual PL19-6009EN 999-C-45 (8405492) Electric Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com PL19-6009EN Description Tool Specifications

More information

0.4 hp. Right Angle Tools

0.4 hp. Right Angle Tools 0.4 hp. Right Angle Tools Models: 50210, 50211, 50561, 50570 Lubricants: 95842 Dynabrade Air Lube 10W/NR 95848 Gear Oil Lubricant Gun: 95541 Push-Type Gun 0.4 hp. Right Angle Tools Models: 50210, 50211,

More information

SW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner

SW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Parts Manual PL2-029EN Formerly: PC-468-5080 SW00PRY220 (4685080) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Caterpillar # 8T-590 For additional product information visit our website at http://www.apextoolgroup.com

More information

Maintenance Information

Maintenance Information 80234313 Edition 2 May 2014 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the

More information

Disassembly Instructions hp. Mini-Dynafile II

Disassembly Instructions hp. Mini-Dynafile II Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the

More information

14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner

14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14

More information

Parts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX

Parts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome

More information

Precision Grinders 50, ,000 RPM

Precision Grinders 50, ,000 RPM Precision Grinders 50,000 100,000 RPM 0.06 0.2 hp (0.044 0.015 kw) Variety of configurations to meet all your application needs Ideal for precision deburring and metal removal Turbine, governed and nongoverned

More information

Maintenance Information

Maintenance Information 04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,

More information

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7 & 9 GRINDERS AND SANDERS WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome

More information

CP3850 Series Grinders

CP3850 Series Grinders 1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1

More information

Maintenance Information

Maintenance Information 80234313 Edition 1 June 2006 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing

More information

MM Series Radial Piston Power Motors

MM Series Radial Piston Power Motors Instruction Manual MM Series Radial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Specifications Model Number Maximum Allowable Stall Starting

More information

1/4 Die Grinder. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference

1/4 Die Grinder. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual MODEL 52H HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HG HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HSJ HORIZONTAL GRINDER WITH CONE WHEEL INSTALLED. 2 H.P. HORIZONTAL GRINDERS

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

POWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools

POWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools CATALOG 2018 www.eagle-group.com Abrasive Tools Impact Wrenches Drills TM POWER TOOL SOLUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material

More information

Special Applications Require Special Tools

Special Applications Require Special Tools Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110

More information

Illustrated Parts List. Model Series 09B900 TYPE NUMBERS 0050, 0051, 1651, TABLE OF CONTENTS

Illustrated Parts List. Model Series 09B900 TYPE NUMBERS 0050, 0051, 1651, TABLE OF CONTENTS Illustrated Parts List Model Series 09B900 TYPE NUMBERS 0050, 0051, 1651, 1652. TABLE OF CONTENTS FORM MS--0651--03/02/2009 REPLACES FORM MS--0651--08/08/2008 FILE IN SECT. 2 OF SERVICE MANUAL 09B900 Air

More information

For maximum material removal with minimum effort, choose the best tool.

For maximum material removal with minimum effort, choose the best tool. RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,

More information

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy

More information

Angle & Vertical Grinders

Angle & Vertical Grinders Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed

More information

Illustrated Parts List 9B900

Illustrated Parts List 9B900 FORM MS 0651 09/04/2007 REPLACES FORM MS 0651 06/21/2007 FILE IN SECT. 2 OF SERVICE MANUAL 9B900 Illustrated Parts List Model Series 9B900 TYPE NUMBERS 0050, 0051, 1651, 1652. TABLE OF CONTENTS Air Cleaner.........................

More information

19P & 19T Series Pistol Grip Screwdrivers

19P & 19T Series Pistol Grip Screwdrivers Service Manual P12-1012EN 19P & 19T Series Pistol Grip Screwdrivers 19P Series 19T Series For additional product information visit our website at http://www.apextoolgroup.com P12-1012EN Cleco General Information

More information

Disassembly Instructions hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335

Disassembly Instructions hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335 Disassembly Instructions - 0.5 hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply

More information

Disassembly Instructions hp Dynafile

Disassembly Instructions hp Dynafile Disassembly Instructions - 0.5 hp. 14000 Dynafile Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to dissipate the

More information

AFM-14 PART NO Revised: 10/9/01

AFM-14 PART NO Revised: 10/9/01 31-278 & 31-280 6 BELT/12 DISC SANDING CENTER AFM-14 PART NO. 406-12-651-0005 Revised: 10/9/01 Page1/AFM-14/DEB 1 406-12-031-0001 UPPER IDLER COVER 2 406-12-138-0001 KNOB 3 406-12-020-0001 END CAP * 406-12-362-0003

More information

Hydraulic Angle Grinder for Underwater Use Type

Hydraulic Angle Grinder for Underwater Use Type M a s c h i n e n f a b r i k G m b H Hydraulic Angle Grinder for Underwater Use Type 1 1585 0010 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 18.01.13 115850010_Inst_en_Version_03

More information

Pneumatic Power Motors

Pneumatic Power Motors Pneumatic Power Motors Buckeye Dotco Gardner-Denver SP-104-EN 0405 10M Table of Contents ISO-9001 Quality System Certified...................... 1 Model Number Index.................................. 2

More information

BP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ

BP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies

More information

BP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ

BP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies

More information

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101 Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders

More information

General Safety and Maintenance Manual. Output. Type 0.9 H.P.675 W. (L) Lever or (K) Safety Lever R.P.M. (18000PM is standard)

General Safety and Maintenance Manual. Output. Type 0.9 H.P.675 W. (L) Lever or (K) Safety Lever R.P.M. (18000PM is standard) HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER EXTENDED LENGTH DIE GRINDER FEATURING FRONT END DOUBLE ROW BEARINGS FOR SUPPORT. Multiple accessory mounting is possible

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way

More information

Slow Speed Dynafile II

Slow Speed Dynafile II For Serial No. 1D1000 and Higher Parts Page Reorder No. PD01 54 Effective June, 2001 Slow Speed Dynafile II Models: 40381 Slow Speed Dynafile II Air Motor and Machine Parts! WARNING Always operate, inspect

More information

Illustrated Parts List. Model Series 09S500. TYPE NUMBERS 0520 through TABLE OF CONTENTS. Air Cleaner... 5 Blower Housing/Shrouds...

Illustrated Parts List. Model Series 09S500. TYPE NUMBERS 0520 through TABLE OF CONTENTS. Air Cleaner... 5 Blower Housing/Shrouds... Illustrated Parts List Model Series 09S500 FORM MS3727--09/30/2010 REPLACES FORM MS3727--08/10/2010 FILE IN SECT. 2 OF SERVICE MANUAL 09S500 TYPE NUMBERS 0520 through 3707. TABLE OF CONTENTS Air Cleaner...

More information

Supplying the Aerospace, Defense & Metal Working Industries Since 1951!

Supplying the Aerospace, Defense & Metal Working Industries Since 1951! Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA

More information

Spare parts list. Centrifugal pumps CP

Spare parts list. Centrifugal pumps CP Spare parts list Centrifugal pumps CP 000 www.cp.com CP 000 9800 0 0a CP 000 Contents Contents General information............................................................... Spare parts list....................................................................

More information

Edition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions

Edition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions 16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40

More information

DIEMAKERS RIFFLERS (18cm)

DIEMAKERS RIFFLERS (18cm) 45 DIEMAKERS RIFFLERS (18cm) 12700 12795 Prices Each Ref.No. Cut 0/2 12700-12732 12740-12763 19.55 12764 12771 19.55 12781 12782 12783 12790-12795 19.55 Less 10% for 6+ of any one shape/cut 46 H3 Short

More information

Illustrated Parts List 9J900

Illustrated Parts List 9J900 FORM MS 3278 08/31/2007 REPLACES FORM MS 3278 06/18/2007 FILE IN SECT. 2 OF SERVICE MANUAL 9J900 Illustrated Parts List Model Series 9J900 TYPE NUMBERS 0100, 0111, 0115, 0116, 0292, 0304, 0340, 0341, 0368,

More information

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod Effective Serial Number Reference Table Model Number Serial Number 40320, 40321 36300 40326 1284 40330 3001 40335 1129 Models: 40320 Standard Machine 40326 20-1/2" Long Belt Machine 40330 Vacuum Machine

More information

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495) ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts

More information

Material Removal Tools

Material Removal Tools Material Removal Tools mdi - Manufacturers Distributor, Inc Phone: (813) 241-4900 Fax: (813) 571 0422 www.dotcosales.com Sales@DotcoSales.com Model Number Index Model Page 10B1200-32 43 10B2500-01 16 10L1000-36

More information

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites 950 RPM Model 13200.7 hp Model 13500 1 hp 13071 Combo Arbor for up to 3" wide wheels with a 5/8" or 1" dia.

More information

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

1.1/2 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm

More information

Illustrated Parts List to 83499

Illustrated Parts List to 83499 Illustrated Parts List Model Series 83400 to 83499 TYPE NUMBERS 0101, 0105, 0106. FORM MS 5308 5/97 REPLACES FORM MS 5308 1/95 FILE IN SECT. 2 OF SERVICE MANUAL 83400 to 83499 TO FIND THE CORRECT NUMBER

More information

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard) HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

MG 300. Spare parts list. Multi grapple Atlas Copco Construction Tools GmbH No

MG 300. Spare parts list. Multi grapple Atlas Copco Construction Tools GmbH No MG 300 Spare parts list Multi grapple 0 Atlas Copco Construction Tools GmbH No. 3390 7354 0 0046 MG 300 Contents Contents General information................................................................

More information