Technical application guide PrevaLED Compact light engines

Size: px
Start display at page:

Download "Technical application guide PrevaLED Compact light engines"

Transcription

1 Technical application guide PrevaLED Compact light engines JUNE 2013

2 CONTENTS Contents 1. Introduction System overview System information Nomenclature and marking Technical data Possible system combinations 7 3. Installation guide Installation of one LED module inside a luminaire Installation of more than one LED module inside a luminaire Creepage and clearance Constant lumen output (CLM) IP rating Luminaire design Optical considerations Quality of light 8 4. Norms and standards Norms and standards for PrevaLED LED modules and light engines Photobiological safety CRI, CCT Mechanical considerations LED module dimensions LED power supply dimensions Cable dimensions Thermal considerations Heat sink material and size Thermal interface material T c location and temperature measurement Overtemperature protection Electrical considerations Insulation coordination for PrevaLED Compact LED modules Insulation coordination for OPTOTRONIC ECGs Wiring information Electrostatic discharge (ESD) Current setting and thermal protection Wiring in protection class I and II luminaires 20 Please note: All information in this guide has been prepared with great care. OSRAM, however, does not accept liability for possible errors, changes and/or omissions. Please check or contact your sales partner for an updated copy of this guid. Please make sure you re always only using the most recent release of the application guide. 2

3 INTRODUCTION 1. Introduction 1.1. System overview Today, LEDs are recognized as the most cutting-edge lighting technology, and this is especially true for the majority of outdoor lighting applications. Well-designed LED outdoor luminaries can provide the required surface illuminance with an improved uniformity, while using less energy compared to traditional light sources. LED luminaries usually also have a significantly longer lifetime with better lumen maintenance. The technology is improving so rapidly in terms of luminous efficacy, color quality, thermal management and cost that choosing LEDs for general lighting applications no longer means compromising on some of the benefits of conventional lighting technologies. It must be said, however, that current LED product quality can vary significantly among manufacturers, so due diligence is required in their proper selection and use. LED performance is highly sensitive to thermal and electrical design weaknesses that can lead to rapid lumen depreciation or premature failure. In order to be able to offer the best-in-class LED modules, OSRAM capitalizes on its decades of ex perience in the lighting business. OSRAM s PrevaLED Compact series of LED light engines addresses the challenges of LEDbased lighting while at the same time providing great performance and flexibility to the user. The PrevaLED Compact series is specifically designed for outdoor applications such as street, urban and area lighting, or illumination of bicycle paths and pedestrian zones. PrevaLED Compact light engines are also well suited for commercial and industrial high-bay lighting. PrevaLED Compact light engines have several convincing benefits: PrevaLED Compact LED modules are highly reliable. The expected lifespan at which 10 % of the LED population have less than 85 % of the rated flux (L85 B10) is up to hours (at 80 C T c ). The LED modules are designed to be used in combination with OSRAM s OPTOTRONIC LEDset 700 series. By installing both OSRAM LED modules and LED power supplies, the customer is assured about safe operation and about the achievement of target performance. The combination of LED modules and power supplies has been thoroughly tested and proven highly reliable. Because it meets the Zhaga standard, the light engine is future-proof and interchangeable. The light engines provide excellent optical performance, both in terms of efficiency and high quality of light (color rendering). The wide range of lumen packages currently offered (from 2500 lm to lm) allows for addressing a wide range of applications based on a single platform of light sources. Available color temperatures are 4000 K and 5700 K, additional types are currently under consideration. Thanks to the excellent efficiency of the mounted OSLON Square LEDs, the PrevaLED Compact LED module achieves a high luminous flux on a relatively small PCB, which allows for a high design flexibility. Additional details on optical, thermal, mechanical and electrical characteristics can be found in the following sections. Further and updated information (ray files, CAD files and updates of this guide) will be posted at 3

4 INTRODUCTION PrevaLED Compact: Five lumen packages Luminous flux Color temperature 2500 lm 4000 lm 6000 lm 8000 lm lm 4000 K LEP CT2 LEP CT2 LEP CT3 LEP CT3 LEP CT K LEP CT3 LEP CT3 LEP CT3 Interface LEDset 700 system: Suitable for OPTOTRONIC LED power supplies with LEDset and a maximum output current of 700 ma System information + + PrevaLED Compact PrevaLED Compact cable OPTOTRONIC LED power supply 4

5 INTRODUCTION Nomenclature and marking The PrevaLED product series follows a consistent naming convention for identifying key parameters of the LED module and the LED power supply. LED module: LEP: Light engine PrevaLED 6000: 6000 lm 740: CRI + CCT = CRI > K CT3: Size 3 LEP CT3 LED power supply: OT: OPTOTRONIC Wattage: 90 W Input voltage: V Maximum output current: 700 ma 3DIM: DALI, StepDIM, AstroDIM LT: LEDset E: Exterior use OT 90 / / 700 3DIM LT E OT: OPTOTRONIC Wattage: 35 W Input voltage: V Maximum output current: 700 ma LTCS: LEDset/current switch OT 35 / / 700 LTCS 5

6 INTRODUCTION Technical data All values regarding system efficiency and system power consumption refer to the complete system and are measured at typical T c (80 C). For more information on T c measurement, see chapter LED module + LED power supply (at T c typ.) (at T c typ.) 1), 2) LED module V f max. at T amb -30 C Module power [W] Luminous flux [lm] 1) Module effi cacy 3) [lm/w] CCT [K] CRI Beam angle [ ] Lifetime (L85B10) at T c = 80 C [h] 2) PrevaLED Compact LEP CT2 LEP CT2 LEP CT3 LEP CT3 LEP CT3 LEP CT3 LEP CT3 LEP CT Indoor ECG Max. output power [W] Typ. efficiency 5) Max. current [ma] Control T a [ C] T c max. [ C] Lifetime L90 at T c point [h] OT 35/ /700 LTCS OT 45/ /700 LTCS OT DALI 45/ /700 LTCS LEDset at T c = 75 C LEDset at T c = 80 C DALI and LEDset at T c = 75 C Outdoor ECG Max. output power [W] Typ. efficiency 5) Max. current [ma] Control T a [ C] T c max. [ C] Lifetime L90 at T c point [h] OT 50/ /700 LT E OT 50/ /700 3DIMLT(+) E OT 90/ /700 LT E OT 90/ /700 3DIMLT(+) E OT 150/ /700 LT E OT 150/ /700 3DIMLT+ E LEDset at T c = 75 C DIM 4) and LEDset at T c = 75 C LEDset at T c = 80 C DIM 4) and LEDset at T c = 80 C LEDset at T c = 75 C DIM 4) and LEDset at T c = 75 C 1) Target values, tolerance for optical and electrical data: ±10 %. Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data. 2) The LED modules are designed for operation with OT OPTOTRONIC ECGs. Exceeding maximum ratings for operating and storage temperature will reduce the expected lifetime or destroy the light engine. The temperature of the LED module must be measured with a temperature sensor at the Tc point, according to EN and in thermally settled conditions. For the exact location of the Tc point, see the drawing in chapter Tc location and measurement. 3) Minimum module efficacy. Efficacy will improve with the next LEDs with upcoming bin flux. 4) 3DIM: DALI + StepDIM + AstroDIM 6 5) At maximum load

7 INTRODUCTION Possible system combinations Within rated power and voltage range, PrevaLED Compact LED modules and OPTOTRONIC LEDset power supplies can be flexibly combined. Valid and possible combinations of LED modules and ECGs for indoor and outdoor application are shown in the table below. The connection between the LED module and the ECG can be established by the provided cable kit. The cable has a length of 600 mm and its wires are colored in order to facilitate system assembly. Attention: In order to comply with the Zhaga standard, we recommend not to use cables longer than 600 mm. If it should become necessary to use a longer cable, however, the cabling can be extended up to two meters. Product name OT 35/ /700 LTCS OT 45/ /700 LTCS OT DALI 45/ /700 LTCS OT 50/ /700 (3DIM) LT E OT 90/ /700 (3DIM) LT E OT 150/ /700 (3DIM) LT E PrevaLED Compact LEP CT2 LEP CT2 LEP CT3 LEP CT3 LEP CT3 LEP CT3 LEP CT3 LEP CT3 Min Max Min Max Min Max Min Max Min. 1 1 Max. 1 2 Min. 1 1 Max. 1 2 Min. 1 1 Max. 1 1 Min. 1 1 Max. 1 1 Attention: All combinations are affected by the maximum length of the cabling. Maximum cable length from the OPTOTRONIC LED power supply to all LED modules connected in series must not be longer than 2 m. 7

8 2. Luminaire design 2.1. Optical considerations LEP CT Quality of light The PrevaLED Compact optical design consists of a linear distribution of several high-power LEDs in two or more rows, as shown in the image above. The light intensity distribution is Lambertian. Thanks to this characteristic, PrevaLED Compact light engines are suitable for several applications (both indoor and outdoor). Moreover, designing proper secondary optics is easier under these conditions. The EULUMDAT file is available for download at ϕ lrel Intensity Intensity Wavelength (nm) Wavelength spectrum of 4000-K LEDs Wavelength (nm) R 0.0 Wavelength spectrum of 5700-K LEDs -100 Radiation pattern: Typical Lambertian beam shape 8

9 CRI, CCT The nominal available correlated color temperatures (CCTs) of the LED modules are 4000 K and 5700 K. The color rendering index (CRI) is > 65 for all LED modules with a color temperature of 5700 K and >70 for LED modules that utilize 4000-K LEDs. The color variation from module to module is inside an ANSI bin Mechanical considerations LED module dimensions The figures below provide further details on the dimensions of the available PrevaLED Compact LED modules. 3D model files are available on our website: K 4500 K Handle with care! Please do not mechanically stress any components of the LED module. cx cx Color bin of PrevaLED Compact LED modules with CCT: 5700 K K 4500 K 5000 K 5500 K 6000 K 6500 K 7000 K cy 3500 K The LED modules of the PrevaLED Compact family have a metal-core PCB. Its dimensions and the dimensions of the light-emitting surface are standardized according to the requirements listed in Zhaga specification book 4. d kg h b 1 b cy Color bin of PrevaLED Compact LED modules with CCT: 4000 K s l 1 l LED module Size b [mm] b 1 [mm] l [mm] l 1 [mm] s [mm] h [mm] d [mm] LEP-xxxxxxx-CT2 LEP-xxxxxxx-CT

10 LED power supply dimensions Cable dimensions h w 1 w w h l 1 l l 1 l 18 OT 35/45 OT 50/ All figures in mm w1 w h l 1 l OT 150 ECG l [mm] l 1 [mm] w [mm] w 1 [mm] h [mm] Cable colors * Connection to OPTOTRONIC LEDset ECG OT 35/ /700 LTCS Red LED+ OT 45/ /700 LTCS Blue +12 Vset OT DALI 45/ / 700 LTCS OT 50/ /700 LT E OT 50/ /700 3DIMLT(+) E OT 90/ /700 LT E OT 90/ /700 3DIMLT(+) E OT 150/ /700 LT E OT 150/ /700 3DIMLT(+) E Light gray Violet Black GNDset Vset LED- * Attention: The NTCset pin (orange) of the OPTOTRONIC (if available) shall not be connected to the PrevaLED Compact LED module 10

11 2.3. Thermal considerations While PrevaLED Compact LED modules operate with the smallest thermal losses possible, a substantial amount of the LED module s power must be dissipated through the back of the LED module as specified. For most of the applications, passive cooling is sufficient. In case of critical applications, an active cooling combined with a heat sink can maximize the cooling Heat sink material and size For the selection of a suitable heat sink, several points regarding thermal resistance have to be considered. The table below lists the typical thermal resistance of available heat sinking materials. Material Thermal conductivity [W/(m*K)] For satisfactory heat transfer and good cooling, the surface of the heat sink material also has to be taken into consideration. Depending on the location of the particular application, it can be an advantage to use black anodized heat sinks to achieve the best heat transfer to the ambient air. For each LED module type, the thermal power has to be dissipated as listed in the following table: LED modules Optical power [W] Thermal power dissipation [W] LEP CT LEP CT LEP CT Copper LEP CT Aluminium LEP CT Brass 120 LEP CT Steel LEP CT Stainless steel 15 LEP CT Glass 1 Wood Air (dry at 1013 mbar, no convection) at 20 C R th = L A A L 11

12 The selection of a suitable heat sink is usually done through the following steps: Define boundary conditions Total power dissipation of the light engine Max. ambient temperature T amb Max. reference temperature T c according to lifetime requirements Estimate heat sink thermal resistance on light engine level R thca = T C - T A Thermal power LED module Select heat sink thermal resistance Use the estimated R thca as a target for a possible heat sink profile and examine the performance curve in the catalog. As soon as prototype luminaires are available, thermal measurements must be performed to confirm the design. The diagram below can be used to estimate the cooling performance of given aluminium heat sinks of different sizes or to determine the approximate size of a heat sink required for given ambient temperatures. Simulations were done without any airflow turbulence. During testing, the PrevaLED Compact LED modules (size 3) were facing downwards. Warning: A safe and reliable operation can only be realized with sufficient thermal management. Temperature difference between Ta and Tc [ C] lm 8000 lm 6000 lm Heat sink surface [m 2 ] The data presented here show a rough approximation of a real-case application where the dimensions, shape and orientation of the heat sink may change. 12

13 4 10 Gravity Sample heat sink dimensioning Let s consider, for example, a 0.3-m 2 heat sink. The diagram indicates a delta temperature of approximately 40 C from the T c point to the ambient temperatures (6000-lm LED module). In reverse direction, with the given T c temperature of 70 C (max.) and an ambient temperature of 10 C, the resulting temperature difference of 60 C can be used to find the approximate needed heat sink size for stable operation. For the given temperatures and an LEP module, this leads to an aluminium heat sink with a surface of approximately 0.27 m 2. If, for example, AVC is considered as a supplier, the following AVC heat sinks could be appropriate for the approximation above: Cooling type Supplier Passive Product code ST03D00001 ST03B00001 ST03W00002 Illustration AVC The list below shows a selection of suppliers of different cooling solutions: Active cooling systems: Nuventix Sunon Cooler Master Passive cooling systems: AVC Fischer Elektronik Meccal Wakefi eld R-Theta Cool Innovations scherelektronik.de eld.com

14 Thermal interface material A PrevaLED Compact LED module installed within a luminaire with a correct thermal dissipation system does not require the use of thermal interface material (TIM). For particular applications, however, a TIM can be applied between the back of the LED module and the luminaire housing. The material has to be as thin as possible and should reach the desired thermal conduction between the surface of the LED module and the surface of the luminaire housing. For this purpose, the planarity and smoothness of the surface should be optimized. The list below shows a selection of suppliers of different thermal interface materials. The temperature at the T c point can be measured by using a thermocouple which can be glued or soldered to the LED module. Please make sure that the thermocouple is fixed to the T c point with a direct contact. Examples of recommended thermocouples are shown below. K-type thermocouple with miniature connector Illustration Description Temperature range [ C] Thermal interface materials PVC-insulated thermocouple Alfatec Kerafol Laird PFA-insulated thermocouple Bergquist Artic Silver Wakefi eld eld.com Sprung thermocouple T c location and temperature measurement The thermal conduction between the LED module and the heat sink (often the luminaire housing) has to be verified by measuring the temperature at the T c point. The T c point is located on the back of the PCB, centered underneath the LED s light-emitting surface (see figure below). T c point 14

15 To measure the temperature and to ensure a good thermal coupling between the LED module and the heat sink, it is possible to create a small groove along the top surface of the heat sink. If a thermal interface material is installed between the LED module and the heat sink, it is necessary to create a small hole on it to ensure the direct contact to the metal-core PCB. The best solution to measure the temperature at the T c point is to use a sprung thermocouple and insert it inside the heat sink as shown in the figure below. If it isn t possible to reach the back of the PCB, the temperature can be measured between the NTC and the LEDs with a thermocouple installed at 1mm from the NTC (see figure below). The temperature measured at this point will be 2 3 C lower than the one measured at the T c point. Warning: Do not fix the thermocouple on an electrical contact, as this could distort the measurements and electrical functionality. Do not use glue with acrylic for hardening. 15

16 Overtemperature protection To ensure best performance and a long lifetime of all components, the PrevaLED Compact features an embedded electronic circuit which decreases the input current when the temperature at the T c point reaches the critical value of 95 C. The LED module switches off when a temperature of 105 C is reached and switches back on as soon the LED module has cooled down below 90 C. Please consider that this protection only works if the LEDset interface of the PrevaLED Compact LED module is properly connected to an OSRAM OPTOTRONIC LEDset power supply. 100 % LED operating current 100 ma Thermal derating Tc temperature [ C] 2.4. Electrical considerations Insulation coordination for PrevaLED Compact LED modules All tests validating this kind of information were done with OPTOTRONIC ECGs. In accordance with EN , PrevaLED Compact LED modules are suitable for a working voltage below 350 V and the isolation tests can ensure a basic insulation of the LED module. Regarding electromagnetic compatibility, PrevaLED Compact LED modules have a performance criterion A for contact electrostatic discharge of up to 4 kv and for air electro static discharge of up to 8 kv (according to EN ). Fast transient disturbance tests were always passed with performance criterion A (according to EN 61547). For the fixation of the LED module (see chapter 3.1.) it is mandatory to use a fixing system that maintains the proper creepage and clearance distances from live parts (see chapter 3.3.) Insulation coordination for OPTOTRONIC ECGs OPTOTRONIC LED power supplies fulfill the following insulation require ments according to IEC These parameters have to be respected in luminaire design. For further details, please consult the data and instruction sheets of LED power supplies. ECG OT 35/ / 700 LTCS OT 45/ / 700 LTCS OT DALI 45/ /700 LTCS OT 50/ / 700 LT E OT 50/ / 700 3DIMLT(+) E OT 90/ / 700 LT E OT 90/ / 700 3DIMLT(+) E OT 150/ / 700 LT E OT 150/ / 700 3DIMLT + E Maximum output voltage [V] * SELV Insulation (primary/ secondary) 100 Yes Double 120 Yes Double 120 Yes Double 120 Yes Double 120 Yes Double 260 No Double 260 No Double 350 No Double 350 No Double Recommended luminaire class Class I and class II Class I and class II Class I and class II Class I and class II Class I and class II Class I and class II Class I and class II Class I and class II Class I and class II * Maximum possible output voltage. The real maximum allowed operating voltage can be lower, see datasheet. To ensure a long lifetime and a safe handling of the LED power supply and the LED module, OPTOTRONIC LED power supplies are provided with the following features: Overtemperature protection Short circuit protection Overload protection For more information, please refer to the corresponding OPTOTRONIC datasheets. 16

17 Wiring information The recommend wire cross sections which have to be used with OPTOTRONIC ECGs are listed in the following table. OPTOTRONIC input/output Wire cross sections [mm 2 ] OT DIMLT(+)/LT E OT LTCS Mains Equipotential pole LED LED GNDset Vset The cable material is UL-approved (E84703) and fulfills flammability requirements according to UL 94 V-0. The temperature range of the cable is -55 to +125 C. It is possible to use a further sheath to cover all the wires (not included in the kit). In this case, the minimum diameter of the resulting cable is 5.9 mm. +12 Vset The connection between the ECG and the LED module should be established by using the provided cable kit (length: 600 mm). For an easier connection to the ECG, the cables are pre-stripped and all five wires have the same colors as the OPTOTRONIC output cable clamps. B B Wire colors Red OT terminals LED+ Black Violet Light gray Blue Light gray +12 Vset GNDset Blue Red Violet Vset Black LED All figures in mm B-B 5:1 17

18 Ensure that the LED module is correctly connected to the ECG. The following table can help to troubleshoot a wiring problem if it is used with an OPTOTRONIC ECG with LEDset: Disconnected wire OSRAM ECG pin Behavior Cable 1 (red) LED+ LED module shuts down, no current in seriesconnected LEDs, current only in the LEDset circuit Cable 2 (blue) +12 Vset LED module runs at minimum current (75 ma) Cable 3 (light gray) GNDset LT E version: ECG shuts down 3DIMLT E version: LED runs at maximum current of the ECG (LEDset protection disabled, default) 3DIMLT E version: Cable 4 (violet) Vset ECG shuts down (LEDset protection enabled) LTCS version: ECG shuts down (DIP switch = LEDset) LTCS version: ECG runs at current selected by the DIP switch Cable 5 (black) LED- LED module shuts down, no current in seriesconnected LEDs, current only in the LEDset circuit Electrostatic discharge (ESD) PrevaLED Compact LED modules require special ESDsafe handling procedures in a production environment. To improve the ESD and surge protection of the system, a thermal interface material can be used between the LED module and the heat sink/luminaire housing. Details on installation can be found in chapter 3. Installation guide Current setting and thermal protection The PrevaLED Compact LED module features a particular on-board electronic circuit that sets the current needed to ensure the specific lumen output of the LED module. In addition, this circuit monitors the temperature of the module and reduces the LEDs current, if required. These two features are available only if the LED module is connected to the OPTOTRONIC ECG via LEDset interface. LEDset allows: A faster installation since the current of the OT is set automatically by the PrevaLED Compact LED module itself. To set the right current without any other kind of electronic device and without programming the OT. In case of wrong installation or working temperatures exceeding the rated T c value, the safety of the LED module is assured by the thermal protection. Attention: For 3DIMLT and 3DIMLT+, the LEDset protection needs to be enabled via the 3DIM Tool in the OPTOTRONIC configuration tab. For the LT version, the LEDset protection is enabled by default. The LEDset protection allows to switch off the ECG in case of a broken wire to avoid any thermal damage to the LED module due to high currents. Warning: If the LED module is not connected to the OPTOTRONIC LED power supply using the LEDset interface, there is no thermal protection. All information necessary to use this LED module with other ECGs can be found in the PrevaLED Compact datasheet. Warning: In case of LED+ or LED- disconnection, disconnect the mains voltage and wait up to 20 seconds before reinstalling the LED module. 18

19 The flux bin can be found on the front of the LED module: Flux bin An output flux different from the rated value can be obtained by setting the LED current manually without using the LEDset interface. Refer to the graph on the right for the evaluation of the required LED supply current in order to achieve the desired flux change. Please note that the output flux values shown in the graph are normalized in respect to flux at 700 ma, even if the typical current of the LED module can be lower. Example: The LED module LEP (MU) is required to have a flux of 5400 lm instead of a nominal flux of 6000 lm (-10 %). The nominal flux is achieved at I typ = 500 ma. By using the graph, it can be easily checked that the LED current has to be reduced from 500 ma to about 425 ma. Please refer to the PrevaLED Compact datasheet for the I typ values Required fl ux 1 reduction: 10 % I [A] Flux/Flux nom. LED current has to be reduced from 500 ma to 425 ma Attention: This operation mode is highly recommended only in case of a reduction of the LED supply current in respect to the nominal value. 19

20 Wiring in protection class I and II luminaires OPTOTRONIC LED power supplies of the 3DIMLT(+) E and LT E family are designed for different luminaires. Independent of the luminaire class, it is always recommended to connect the equipotential pin (pink color) of the OT 50, 90 and 150 to the heat sink of the LED module. This connection allows achieving a better protection of the LED module in case of asymmetric over-voltages or surges on the main supply (between L/N and earth (ground)). LED luminaire, protection class I Class I luminaires The PE wire must be connected to touchable metal parts of the luminaire. It is highly recommended to connect the PE of the luminaire to the equipotential pin (pink color) of the OPTOTRONIC 3DIMLT(+)/LT E as well. LED luminaire, protection class II Class II luminaires No PE wire is used in these installations. It is recommended, however, to connect the equipotential pin (pink color) of the OPTOTRONIC 3DIMLT(+)/LT E to the heat sink of the LED module to improve the surge withstand capability of the LED module. 20

21 INSTALLATION GUIDE 3. Installation guide 3.1. Installation of one LED module inside a luminaire Note: The installation of LED systems (LED modules and ECGs) needs to be carried out in compliance with all applicable electrical and safety standards. Only qualified personnel should perform installations. To get a better understanding of the LED module concept and the design of a luminaire, the following pages will lead through a typical design-in. The PrevaLED Compact LED module is fixed by four M3 screws according to ISO These screws should be applied using a torque in the range of Nm. The usage of a TIM does not change the torque needed. Warning: Excessive torque on the mounting screws may cause damage to the LED module Installation of more than one LED module inside a luminaire If more than one PrevaLED Compact LED module is installed within one luminaire using the same ECG, only one LEDset interface can be connected to the LED power supply. Connect the LEDset to the LED module that can reach the highest temperature. Please isolate the cables of the second LEDset interface (see schematic below): L max. = 2 x 2 m Each wire has to be insulated seperately Two or more LED modules have to be connected in series if they are installed with the same ECG. First, mount the PrevaLED Compact LED module (perhaps, if needed, with an additional heat sink) and the ECG into the luminaire. To fixate the ECG, use the screws recommended in the datasheet of the OPTOTRONIC LED power supply. Connect the cable between the ECG and the PrevaLED Compact. Warning: Never wire PrevaLED Compact LED modules with different lumen packages to the same ECG as this might destroy the modules. 21

22 INSTALLATION GUIDE 3.3. Creepage and clearance In order to meet safety requirements during luminaire design with PrevaLED Compact LED modules, particular attention must be paid to creepage and clearance distances (consider IEC 60598). The green-marked regions on the PrevaLED Compact LED module below are the live parts of the module. Please maintain the needed creepage and clearance distances to any accessible live part. Warning: All metal contacts of the electronic components, all test points and also the copper traces covered with solder mask have to be considered live parts. When fixing the light engine to the luminaire, consider that the distances D1, D2 and D3 between live parts have the value shown in the table below. + D1 D2 D3 D1 + LED cluster (all copper areas in blue) LED module D1 [mm] D2 [mm] D3 [mm] LEP-xxxx-xxx-CT LEP-xxxx-xxx-CT Electronic circuit 22

23 INSTALLATION GUIDE 3.4. Constant lumen module (CLM) In some applications, it can be useful to compensate the normal lumen output degradation of LED modules with a programmed current increase. Through the 3DIM Tool software, the operating current can be set to compensate the lumen degradation over the lifetime. Working hours [h] OT current [%] DIM Tool DALI magic USB Setup of the 3DIM Tool DALI Optional LED power supply up to 64 devices DA ~ Output [%] 100 % LED current Flux (no CLM) 80 % Guaranteed light level Without CLM Time [khrs] How to configure the constant lumen module in the 3DIM Tool Warning: With a set current exceeding the nominal current of the module, the warranty does not apply. Output [%] 100 % LED current Flux (with CLM) With CLM, the constant luminous flux of the LED module can be reduced down to 70 % of the nominal luminous flux (100 %). 80 % Guaranteed light level Time [khrs] The initial current of an LEP CT2 with an active CLM and an ensured light level of 3400 lm, for instance, is 17 % lower than the typical nominal value, therefore requiring a constant lumen module (CLM) starting value of 83 %. With CLM The following table helps identifying the power level that has to be set in the OPTOTRONIC 3DIM ECG: 3.5. IP rating The PrevaLED Compact has no special IP rating. 23

24 NORMS AND STANDARDS 4. Norms and standards 4.1. Norms and standards for PrevaLED LED modules and light engines Electromagnetic compatibility: EN EN EN EN EN EN Photobiological safety: IEC LED module safety: EN UL 8750 Vibration, tensile strength: EN EN Temperature, corrosion stress: JESD22-A105-C JESD22-A103 JESD22-A101-C EN EN Photobiological safety The evaluation of photobiological safety is carried out according to the standard IEC 62471:2006 ( Photobiological safety of lamps and lamp systems ). Following the definition of the risk grouping system of the mentioned IEC standard, the LEDs mounted on PrevaLED Compact light engines fall into the class Moderate risk (RG2 max. exposure time: 59 s). Under real circumstances (regarding exposure time, pupils, observation distance), it is assumed that there is no endangerment to the eye from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. For this kind of product, the marking Caution! Possibly hazardous optical radiation emitted from this product is necessary. Important note: OSRAM products must never be directly exposed to external influences. Always provide adequate protection for relevant outdoor applications (covers, housings etc.) and never operate the products in or under water. For more information on ingress protection, please see the technical application guide IP codes in accordance with IEC at 24

25 OSRAM GmbH Head Office Marcel-Breuer-Strasse Munich Germany Phone +49 (0) Fax +49 (0) /13 Subject to change without notice. Errors and omission excepted.

Typ. CRI. SDCM Module P [W]

Typ. CRI. SDCM Module P [W] www.osram.com/prevaled-linear PrevaLED Linear Slim Preliminary Data sheet Light Engines 630lm and 1000lm Light Engines 2000lm Benefits Efficacy: Over 100 lm/w Homogeneous light distribution (4.2 mm pitch)

More information

PrevaLED Linear Slim 3

PrevaLED Linear Slim 3 www.osram.com PrevaLED Linear Slim 3 550 lm on 140 mm 1100 lm, 2000 lm on 280 mm 2200 lm, 4000 lm on 560 mm 8000 lm on 1400 mm Dimension (l x w x h): 140 mm x 20 mm x 5 mm 280 mm x 20 mm x 5 mm 560 mm

More information

PrevaLED Linear Slim 3

PrevaLED Linear Slim 3 www.osram.com 1100lm, 2000lm on 280mm 2200lm, 4000lm on 560mm Dimension (l x w x h): 280mm x 20mm x 6mm 560mm x 20mm x 6mm Benefits Module efficacy: up to 170 lm/w CCT: 3000K, 4000K, 6500 K Luminous flux:

More information

PrevaLED Linear Value 2

PrevaLED Linear Value 2 www.osram.com/prevaled-linear PrevaLED Linear Value 2 Light Engines 650lm and 1100lm on 280mm 1300lm and 2200lm on 560mm Dimension (l x w x h): 280mm x 32.6mm x 5.8mm 560mm x 32.6mm x 5.8mm Benefits Efficiency:

More information

PrevaLED Cube G2. Product family datasheet. Spot-, Down- and Wallmount Light Engines and Modules

PrevaLED Cube G2. Product family datasheet. Spot-, Down- and Wallmount Light Engines and Modules PrevaLED Cube G2 Spot-, Down- and Wallmount Light Engines and Modules Areas of application _ Suitable for diffuser and reflector luminaires _ Hospitality, hotels, restaurants _ Public and commercial buildings

More information

05/2014 Technical application guide PrevaLED Cube AC G2 light engines Light is OSRAM

05/2014 Technical application guide PrevaLED Cube AC G2 light engines Light is OSRAM www.osram.com/prevaled 05/2014 Technical application guide PrevaLED Cube AC G2 light engines Light is OSRAM PrevaLED Cube AC G2 light engines Contents Contents 1 Introduction 03 1.1 System overview 03

More information

08/2014 Technical application guide PrevaLED Flat AC and Flat AC L-EM light engines Light is OSRAM

08/2014 Technical application guide PrevaLED Flat AC and Flat AC L-EM light engines Light is OSRAM www.osram.com/prevaled 08/2014 Technical application guide PrevaLED Flat AC and Flat AC L-EM light engines Light is OSRAM PrevaLED Flat AC light engines Contents Contents 1 Introduction 03 1.1 System overview

More information

Stanley 3J 1 PowerStar Whites

Stanley 3J 1 PowerStar Whites Stanley 3J 1 PowerStar s ILS-SJ01-xx95-SC201-xx Series Product Overview At the heart of each PowerStar is a Stanley Electric 3J Series LED giving outstanding luminance with CRIs in excess of 95. All Stanley

More information

7 OSLON +80 PowerAnna PCB White

7 OSLON +80 PowerAnna PCB White 7 OSLON +80 PowerAnna PCB ILC-ONA7-XXXX-SC211-. Series Product Overview The all new PowerAnna Coin from ILS has been designed to work with any Ledil Anna lens whether this be the 40 or 50mm lens. At the

More information

OSLONeye Powerstar LED Modules

OSLONeye Powerstar LED Modules OSLONeye Powerstar LED Modules ILI-ON01-xxxx-SC211. Product Overview The OSLONeye is a Compact High-Flux LED Minispotlight. At the heart of each OSLONeye is an OSLON SSL 80 ThinGan (UX:3) LED. A low thermal

More information

PrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description

PrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description www.osram.com/prevaled-linear PrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description PrevaLED Linear Value HV series offers innovative solutions for a variety of general

More information

Duris E5 PowerFlex LED Strips 7.5mm LED Pitch

Duris E5 PowerFlex LED Strips 7.5mm LED Pitch Duris E5 PowerFlex LED Strips 7.5mm LED Pitch ILX-E507-XX10-3240-CD2XX Product Overview The PowerFlex range are densely populated, high bright, flexible LED strips using the Osram Duris E5 LED at its heart.

More information

Fortimo LED Line High Flux

Fortimo LED Line High Flux Line 2 ft 4000 lm 1R HV2 Datasheet Fortimo LED Line High Flux Fortimo LED Line High Flux system are designed to enable LED lighting at higher application heights where more light is needed, such as trunking,

More information

PrevaLED Core Z3. Product family datasheet. Spot-, Down- and Wallmount Light Engines and Modules. Areas of application.

PrevaLED Core Z3. Product family datasheet. Spot-, Down- and Wallmount Light Engines and Modules. Areas of application. PrevaLED Core Z3 Spot-, Down- and Wallmount Light Engines and Modules Areas of application Spotlighting in shops Down- and wall lighting in offices, corridors, meeting rooms, workplaces Decorative and

More information

Application Note SubstiTUBE ST8-SD4

Application Note SubstiTUBE ST8-SD4 www.osram.com/substitube Application Note ST8-SD4 Index Page 1. Product description 3 1.1 General Safety and application information 4 2. Installation options 5 2.1 Overview 2.2 Retrofitting in a CCG luminaire

More information

Dragon 4 IR 12 PowerCluster

Dragon 4 IR 12 PowerCluster Dragon 4 IR 12 PowerCluster ILR-IT04-xxxx-SC201-xx Series Product Overview At the heart of each PowerCluster are 4 OSRAM IR Golden Dragon Series LEDs. PowerClusters are compact, powerful LED light sources

More information

Duris E5 PowerFlex LED Strips 7.5mm LED Pitch

Duris E5 PowerFlex LED Strips 7.5mm LED Pitch Duris E5 PowerFlex LED Strips 7.5mm LED Pitch ILX-E507-xx10-3240-SD2xx Product Overview The PowerFlex range are densely populated, high bright, flexible LED strips using the Osram Duris E5 LED at its heart.

More information

PrevaLED Line High Flux

PrevaLED Line High Flux www.osram.us/ds PrevaLED Line High Flux The PrevaLED Line High Flux LED modules offer an innovative solution for a variety of high bay and industrial applications. The boards consist of high effi cacy

More information

Fortimo LED Line Gen3

Fortimo LED Line Gen3 LED Line 1 ft 650 lm 3R HV3 Datasheet Fortimo LED Line Gen3 Fortimo LED Line systems are designed to produce pure white light for general lighting applications with high efficiency levels. The Fortimo

More information

OSLON SSL LED 480mm PowerLinear White

OSLON SSL LED 480mm PowerLinear White OSLON SSL 80 15 LED 480mm PowerLinear ILS-ON15-xxxx-0480-SC211-xx Series Product Overview At the heart of each PowerLinear 480mm are 15 OSRAM Opto Semiconductors OSLON SSL 80 ThinGan (UX:3) LED. These

More information

PHASED OUT. LED light engine / OLED LED compact. Module SLE G5 ART EXC Modules SLE EXCITE

PHASED OUT. LED light engine / OLED LED compact. Module SLE G5 ART EXC Modules SLE EXCITE w LED light engine / OLED Product description Highest light quality in the market with full spectrum technology Application: Shop, Art & Culture Housing with Snap-On feature for easy reflector mounting

More information

PRODUCT FAMILY DATASHEET PrevaLED Core Z6

PRODUCT FAMILY DATASHEET PrevaLED Core Z6 PrevaLED Core Z6 Spot-, Down- and Wallmount Light Engines and Modules AREAS OF APPLICATION Spotlighting in shops and retail Down- and wall lighting in offices, corridors, meeting rooms, workplaces Decorative

More information

12 OSLON 80 SSL MiniFlood Whites

12 OSLON 80 SSL MiniFlood Whites 12 OSLON 80 SSL MiniFlood Whites ILR-ON12-####-SC211- Product Overview The all new MiniFlood from ILS was designed to work exclusively with the Petunia lens from LEDiL. Each MiniFlood contains 12 OSLON

More information

3 OSLON +80 PowerAnna PCB Colours

3 OSLON +80 PowerAnna PCB Colours 3 OSLON +80 PowerAnna PCB Colours ILC-ONA3-XXXX-SC211- Series Product Overview The all new PowerAnna Coin from ILS has been designed to work with any Ledil Anna lens whether this be the 40 or 50mm lens.

More information

OSLON PowerStar Colours

OSLON PowerStar Colours OSLON 80 4+ PowerStar Colours ILH-ON04-xxxx-SC211-xx Series Product Overview At the heart of each PowerStar are 4 OSLON SSL 80 ThinGan (UX:3) LEDs. OSLON SSL can be driven up to 1000 ma while OSRAM s latest

More information

Technical application guide LINEARlight Flex Diffuse (LFD) Light is OSRAM

Technical application guide LINEARlight Flex Diffuse (LFD) Light is OSRAM www.osram.com/flex Technical application guide LINEARlight Flex Diffuse (LFD) Light is OSRAM LINEARlight Flex Diffuse (LFD) Contents Contents 1 Product overview 03 1.1 General features 03 1.2 Application

More information

LED MODULES. Comfort COB Residential, Retail and Industrial Lighting COMFORT COB 500 LM TO 11,000 LM

LED MODULES. Comfort COB Residential, Retail and Industrial Lighting COMFORT COB 500 LM TO 11,000 LM LED MODULES COMFORT COB 500 LM TO 11,000 LM COMFORT COB RESIDENTIAL, RETAIL AND INDUSTRIAL LIGHTING Typical Applications VCA102 / VCA123 Integration in reflector luminaires Residential lighting Furniture

More information

PHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED

PHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED Product description Ideal for compact linear luminaires designs Homogenous illumination thanks to small package distance Best refurbishment option for T5 lamps Luminous flux range 29 up to 85 lm LED system

More information

Tunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM

Tunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM Module LLE G2 PREMIUM LLE PREMIUM Product description Linear Tunable White LED module with 2,700 and 6,500 K SMT packages Ideal for linear and panel luminaires Optimal solution for Tunable White applications

More information

TSLC 6 UV LED 24v Strips

TSLC 6 UV LED 24v Strips TSLC 6 UV LED 24v Strips ILS-X#06-####-SD111. Product Overview At the heart of each N3535 UV 6 Strip product is a compact, high quality and reliable TSLC N3535 1-chip UV LED, with primary 55 or 125 degree

More information

OSLON Strip Colours

OSLON Strip Colours OSLON 150 6+ Strip Colours ILS-OW06-xxxx-SD111-xx Series Product Overview At the heart of each Strip are 6 OSLON SSL 150 ThinGan ( UX:3 ) LEDs. OSLON SSL can be driven up to 1000mA while OSRAM s latest

More information

OSLON 80 1 Micro Colours

OSLON 80 1 Micro Colours OSLON 80 1 Micro Colours ILM-ON01-####-SC211- Series Product Overview The Micro OSLON is now the smallest LED Light Engine from Intelligent LED Solutions measuring at just 11mm in diameter. Due to its

More information

LED light engine / OLED LED compact

LED light engine / OLED LED compact Module STARK CLE 12-2 CLASSIC / CLE 13-25 CLASSIC Modules CLE Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation

More information

LED light engine / OLED LED compact. Umodule SLE G4 FASHION EXC

LED light engine / OLED LED compact. Umodule SLE G4 FASHION EXC w LED light engine / OLED Umodule SLE G4 FASHION EXC umodule SLE Product description Optimized light spectrum for perfect fashion presentation Housing with Snap-On feature for easy reflector mounting LED-solution

More information

PHASED OUT. LED / OLED Light Engine LED linear / area. Umodule STARK LLE STARK LLE

PHASED OUT. LED / OLED Light Engine LED linear / area. Umodule STARK LLE STARK LLE Product description Ideal for linear and panel lights with high luminous flux Luminous flux range from 1,5 up to 2,4 lm Efficiency of the module up to 129 lm/w High colour rendering index CRI > Small colour

More information

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE CLASSIC / CLE CLASSIC Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE CLASSIC / CLE CLASSIC Modules CLE Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation to existing luminarie architecture Luminarie body can act as

More information

LED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM

LED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM Module LLE PREMIUM CRI90 LLE PREMIUM Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 122 lm/w at tp = 65 C High colour rendering index CRI > 90 Low tolerances

More information

LED modules LED linear / area

LED modules LED linear / area Module QLE G2 3x3mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,5 up to 8,2

More information

LED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE

LED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE Module STARK LLE PREMIUM Modules LLE Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 125 lm/w at tp = 65 C High colour rendering index CRI > 80 Low tolerances

More information

01/2018 Technical application guide PrevaLED Core G7 LED modules Light is OSRAM

01/2018 Technical application guide PrevaLED Core G7 LED modules Light is OSRAM www.osram.com/prevaled-core 01/2018 Technical application guide PrevaLED Core G7 LED modules Light is OSRAM PrevaLED Core G7 LED modules Contents Contents 1 Introduction 03 1.1 System overview 03 1.2 Ordering

More information

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE Umodule STARK LLE-G3-24-28-12 CLASSIC EM STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,13 up to 1,64 lm Combined LED module for general and emergency lighting Integrated

More information

LED. High-performance streetlight. -afortable and reliable

LED. High-performance streetlight. -afortable and reliable LED High-performance streetlight -afortable and reliable DESIGNED FOR FUNCTIONAL LIGHTING OF OUTDOOR ROADS WHERE ENERGY SAVING, LOW MAINTENANCE AND PRECISE LIGHT CONTROL CONSIDERATIONS ARE IMPORTANT FACTORS.

More information

LED modules LED linear / area

LED modules LED linear / area Module STARK LLE-G3-24-140-650, LLE-G3-24-280-1250-SELECT Modules LLE excite Product description Ideal for linear and panel lights Luminous flux range 530 up to 1,430 lm LED system solution with outstanding

More information

Bridgelux Micro SM4. Product Data Sheet DS27 PRELIMINARY, Expires 03/31/12. Introduction. Features. Benefits

Bridgelux Micro SM4. Product Data Sheet DS27 PRELIMINARY, Expires 03/31/12. Introduction. Features. Benefits Bridgelux Micro SM4 Product Data Sheet DS27 PRELIMINARY, Expires 03/31/12 Introduction The Bridgelux Micro SM4 delivers high performance, compact and cost-effective solid-state lighting solutions to serve

More information

U LED modules, converters and systems GENERAL ILLUMINATION. Umodule STARK QLE CLASSIC EM umodule STARK QLE PHASED OUT. Ordering data.

U LED modules, converters and systems GENERAL ILLUMINATION. Umodule STARK QLE CLASSIC EM umodule STARK QLE PHASED OUT. Ordering data. EM_In() EM_Out(-) D Product description Ideal for linear and panel lights Combined LED module for general and emergency lighting Integrated separate emergency LEDs controlled by EM powerled (2 or 4 W version)

More information

PHASED OUT. LED light engine / OLED LED compact. Umodule STARK DLE GEN2 CLASSIC STARK DLE

PHASED OUT. LED light engine / OLED LED compact. Umodule STARK DLE GEN2 CLASSIC STARK DLE Product description For downlights Luminous flux up to 4,650 lm at tp = 65 C High efficacy up to 162 lm/w for the LED module High system efficacy up to 139 lm/w at tp = 65 C BLO operation mode: Best LED

More information

LED light engines LED linear / area

LED light engines LED linear / area Module LLE 24mm 2lm EXC Modules LLE EXCITE Product description Ideal for linear and panel lights in industrial applications Reliable, high lifetime solution and extended temperatur range in combination

More information

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE Product description The round shape downlight solution Designed for simple and cost-effective downlight fixtures No reflector or additional module housing required Efficacy of the module up to 139 lm/w

More information

LED light engine / OLED LED linear / area

LED light engine / OLED LED linear / area Module QLE G2 38x38mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,52 up to

More information

Datasheet. Oslon10 Cluster White. LED Solutions. ILR-ON10-xxxx-SC201-xx series. Product Overview. Applications. Technical Features:

Datasheet. Oslon10 Cluster White. LED Solutions. ILR-ON10-xxxx-SC201-xx series. Product Overview. Applications. Technical Features: Datasheet Oslon high bright LEDs from Osram Oslon10 Cluster White LED Solutions ILR-ON10-xxxx-SC201-xx series Product Overview At the heart of each Oslon10 Cluster are ten Osram Opto Semiconductors Oslon

More information

OSLON 9 PowerCluster IR

OSLON 9 PowerCluster IR OSLON 9 PowerCluster IR ILR-IO09-xxxx-SC201-xx Series Product Overview At the heart of each PowerCluster are 9 OSRAM IR OSLON Black Series LEDs, which are today s smallest infrared LED with more than one

More information

LED BUILT-IN MODULES. LED Module Easy 28 Industrial and Hospitality Lighting EASY 28 3,500 LM TO 14,000 LM EASY 28 INDUSTRIAL AND HOSPITALITY LIGHTING

LED BUILT-IN MODULES. LED Module Easy 28 Industrial and Hospitality Lighting EASY 28 3,500 LM TO 14,000 LM EASY 28 INDUSTRIAL AND HOSPITALITY LIGHTING LED BUILT-IN MODULES EASY 28 3,500 LM TO 14,000 LM EASY 28 INDUSTRIAL AND HOSPITALITY LIGHTING Typical Applications DMS120/12C/18C***G Integration in industrial luminaires Production halls Warehouses Retail

More information

LED light engines LED linear / area. Module STARK QLE G3 SELECT Modules QLE EXCITE

LED light engines LED linear / area. Module STARK QLE G3 SELECT Modules QLE EXCITE Module STARK QLE G3 SELECT Modules QLE EXCITE Product description Ideal for linear and panel lights Luminous flux range from 1,9 1,62 lm LED system solution with outstanding system efficacy up to 137 lm/w,

More information

Bridgelux Gen 7 V8 Array. Product Data Sheet DS104

Bridgelux Gen 7 V8 Array. Product Data Sheet DS104 Bridgelux Gen 7 V8 Array Product Data Sheet DS104 1 Introduction V Series The V Series LED array products deliver high quality light in a compact and cost-effective solid state lighting package. These

More information

Bridgelux Gen 7 Vero 13 Array. Product Data Sheet DS91

Bridgelux Gen 7 Vero 13 Array. Product Data Sheet DS91 Bridgelux Gen 7 Vero 13 Array Product Data Sheet DS91 1 Introduction Vero Series Vero Series is a revolutionary advancement in chip on board (COB) light source technology and innovation. Vero LED light

More information

Bridgelux V6 Array. Product Data Sheet DS40. BXRE-27x x x x0400

Bridgelux V6 Array. Product Data Sheet DS40. BXRE-27x x x x0400 Bridgelux V6 Array Product Data Sheet DS40 BXRE-27x0400 30x0400 35x0400 40x0400 50x0400 Introduction V Series The V Series LED Array products deliver high quality light in a compact and cost-effective

More information

LED light engine / OLED LED linear / area

LED light engine / OLED LED linear / area Module QLE G1 488x239mm 25lm ADV-SE Modules QLE Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x

More information

PHASED OUT. LED light engine / OLED LED linear / area. Module QLE G1 488x239mm 2500lm ADV-SE Modules QLE

PHASED OUT. LED light engine / OLED LED linear / area. Module QLE G1 488x239mm 2500lm ADV-SE Modules QLE Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x 625 mm fitting Time saving: less mounting/wiring

More information

Experience bright and vivid colors

Experience bright and vivid colors SLM Gen4 1100 lm L13 Datasheet Experience bright and vivid colors Fortimo LED SLM 1100 lm L13 The Fortimo LED SLM Gen4 is a next generation solution for spotlight and mini-downlight applications. It is

More information

Experience bright and vivid colors

Experience bright and vivid colors Fortimo LED Fortimo LED SLM CW 1205 L13 2024 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM CW 1205 L13 1619 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of

More information

Experience bright and vivid colors

Experience bright and vivid colors SLM Gen4 1100 lm L9 Datasheet Experience bright and vivid colors Fortimo LED SLM 1100 lm L9 The Fortimo LED SLM Gen4 is a next generation solution for spotlight and mini-downlight applications. It is a

More information

SubstiTUBE Advanced ST8-HA4

SubstiTUBE Advanced ST8-HA4 www.osram.com SubstiTUBE Advanced ST8-HA4 Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 54% by replacing 1.2 m T8 fluorescent

More information

PHASED OUT. LED light engine / OLED LED compact. Module CLE G2 190mm 1500lm ADV EM Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module CLE G2 190mm 1500lm ADV EM Modules CLE Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency function and SWITCH sensor Based on

More information

LED light engine / OLED LED compact

LED light engine / OLED LED compact Module CLE G2 19mm 15lm ADV EM Modules CLE Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency

More information

Experience bright and vivid colors

Experience bright and vivid colors SLM 1205 PW L13 Gen5 Datasheet Experience bright and vivid colors Fortimo LED SLM 1205 lm PW L13 Fortimo LED SLM Gen5 continues to focus on the combination of Quality of Light and performance. By offering

More information

SLA DC. LED light engines ready2apply. Module SLA DC G2 50mm SNC Modules SLA ESSENCE

SLA DC. LED light engines ready2apply. Module SLA DC G2 50mm SNC Modules SLA ESSENCE SLA DC Module SLA DC G2 50mm SNC Modules SLA ESSENCE Product description Fits in most existing MR16 / GU10 halogen luminaires Replacement of 50 W MR16 halogen lamps or 20 W HID lamp Module with integrated

More information

Experience bright and vivid colors

Experience bright and vivid colors Fortimo LED Fortimo LED SLM PW 18 L15 24 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM PW 18 L15 24 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of Light and

More information

Bridgelux Vero. Product Data Sheet DS120. SE 10 Array

Bridgelux Vero. Product Data Sheet DS120. SE 10 Array Bridgelux Vero Product Data Sheet DS120 SE 10 Array 1 Introduction Vero SE Vero SE is a revolutionary light source system that integrates Bridgelux s seventh generation COB technology with poke-in connectivity

More information

Recommended Land Pattern: [mm]

Recommended Land Pattern: [mm] Dimensions: [mm] 3,25 ±0,15 1,3 ±0,15 1 2 3,25 ±0,15 Recommended Land Pattern: [mm] 4,0 3,25 0,48 1,3 0,5 3,25 Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit

More information

Experience bright and vivid colors

Experience bright and vivid colors Fortimo LED Fortimo LED SLM PW 1205 L13 2024 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM PW 1205 L13 2024 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of

More information

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC STARK LLE

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC STARK LLE Umodule STARK LLE-G3-24-28-2 CLASSIC STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,45 up to 2,11 lm LED system solution with outstanding system efficacy up to 129

More information

PHASED OUT. LED light engine / OLED LED linear / area. Umodule STARK LLE umodule LLE ADVANCED

PHASED OUT. LED light engine / OLED LED linear / area. Umodule STARK LLE umodule LLE ADVANCED Ideal for linear and panel lights Luminous flux range 1, up to 1,300 lm LED system solution with outstanding system efficiency up to 111 lm/w, consisting of linear LED modules and dimmable LED Driver LCAI

More information

Bridgelux Vero SE 29 Array Series. Product Data Sheet DS123

Bridgelux Vero SE 29 Array Series. Product Data Sheet DS123 Bridgelux Vero SE 29 Array Series Product Data Sheet DS123 1 Introduction Vero SE Vero SE is a revolutionary light source system that integrates Bridgelux s seventh generation COB technology with poke-in

More information

Bridgelux RS Array Series

Bridgelux RS Array Series Bridgelux RS Array Series Product Data Sheet DS25 BXRA-27X-3500-F, BXRA-27X4000-H, BXRA-27x7000-J, BXRA-30X3500-F, BXRA-30X4000-H, BXRA-30X7000-J, BXRA-35X3500-F, BXRA-35X4000 -H, BXRA-35X7000-J, BXRA-40X4000-F,

More information

LED MODULES. LUGA Shop Gen. 5 Retail and Industrial Lighting LUGA SHOP GEN LM TO 20,000 LM LUGA SHOP GEN. 5 RETAIL AND INDUSTRIAL LIGHTING

LED MODULES. LUGA Shop Gen. 5 Retail and Industrial Lighting LUGA SHOP GEN LM TO 20,000 LM LUGA SHOP GEN. 5 RETAIL AND INDUSTRIAL LIGHTING LED MODULES LUGA SHOP GEN. 5 1000 LM TO 20,000 LM LUGA SHOP GEN. 5 RETAIL AND INDUSTRIAL LIGHTING Typical Applications DMS123***G Integration in reflector luminaires Residential lighting Furniture lighting

More information

Bridgelux Gen 7 Vero 13 Array Series. Product Data Sheet DS91

Bridgelux Gen 7 Vero 13 Array Series. Product Data Sheet DS91 Bridgelux Gen 7 Vero 13 Array Series Product Data Sheet DS91 BXRC-27x2000 30x2000 35x2000 40x2000 50x2001 57x2001 65x2001 Introduction Vero Vero represents a revolutionary advancement in chip on board

More information

Product Data Sheet DS123 BXRC-27x10K0 30x10K0 35x10K0 40x10K0 50x10K1 57x10K1 65x10K1

Product Data Sheet DS123 BXRC-27x10K0 30x10K0 35x10K0 40x10K0 50x10K1 57x10K1 65x10K1 Bridgelux Vero SE 29 Array Product Data Sheet DS123 BXRC-27x10K0 30x10K0 35x10K0 40x10K0 50x10K1 57x10K1 65x10K1 Introduction Vero SE Vero SE Series represents a state of the art COB solution with revolutionary

More information

Associated Rsets. Associated Drivers. XI013C030V048DNM1 0-10V dimming Rset2. XI025C100V045DNM1 0-10V dimming Rset2

Associated Rsets. Associated Drivers. XI013C030V048DNM1 0-10V dimming Rset2. XI025C100V045DNM1 0-10V dimming Rset2 LED Modules Fortimo SLM Fortimo LED SLM Gen 4 1100lm L9 The Fortimo LED SLM Gen 4 is a next generation solution for spotlight and downlight applications. It is a product in line with the Fortimo brand

More information

Experience bright and vivid colors

Experience bright and vivid colors SLM Gen4+ 3000 lm PW L15 Datasheet Experience bright and vivid colors Fortimo LED SLM 3000 lm PW L15 The Fortimo LED SLM Gen4+ is a next generation solution for spotlight and minidownlight applications.

More information

Bridgelux Gen 7 Vero 13 Array. Product Data Sheet DS91

Bridgelux Gen 7 Vero 13 Array. Product Data Sheet DS91 Bridgelux Gen 7 Vero 13 Array Product Data Sheet DS91 1 Introduction Vero Series Vero Series is a revolutionary advancement in chip on board (COB) light source technology and innovation. Vero LED light

More information

Infusion Module M4500 Series High lumen LED lighting

Infusion Module M4500 Series High lumen LED lighting GE Lighting Infusion Module M4500 Series High lumen LED lighting Product information The high lumen Infusion M4500 Series is a new generation of the Infusion range. When combined with high efficiency optics,

More information

Bridgelux SMD W 24V

Bridgelux SMD W 24V Bridgelux SMD 5050 1W 24V Product Data Sheet DS73 BXEP-27X 30X 35X 40X 45X 50X 57X 65X Introduction SMD 5050 The Bridgelux SMD 5050 high power LED is hot-color targeted, which ensures that the LEDs fall

More information

SPECIFICATION FOR White LED Light Engine

SPECIFICATION FOR White LED Light Engine SPECIFICATION FOR White LED Light Engine where CL is CL(Converterless power); 7755(diameter 77mmX55mm); E(Tile Block); C(120V); 50(Watt) W(white); 8(CRI 80); XX(CCT) High brightness with long lifetime

More information

Bridgelux Gen 7 Vero 10 Array Series. Product Data Sheet DS90

Bridgelux Gen 7 Vero 10 Array Series. Product Data Sheet DS90 Bridgelux Gen 7 Vero 10 Array Series Product Data Sheet DS90 1 Introduction Vero Series Vero Series is a revolutionary advancement in chip on board (COB) light source technology and innovation. Vero LED

More information

SPECIFICATION FOR White LED Light Engine

SPECIFICATION FOR White LED Light Engine SPECIFICATION FOR White LED Light Engine where CL is CL(Converterless power); 78(rectangle in mm); D(Down light); C(120V); 37(Watt); W(white); 8(CRI 80); XX(CCT) High brightness with long lifetime High

More information

Bridgelux SMD W 24V

Bridgelux SMD W 24V Bridgelux SMD 5050 1W 24V Product Data Sheet DS73 BXEP-27X 30X 35X 40X 45X 50X 57X 65X Introduction SMD 5050 The Bridgelux SMD 5050 high power LED is hot-color targeted, which ensures that the LEDs fall

More information

LED light engine / OLED LED compact. Umodule STARK CLE 360 CLASSIC EM STARK CLE

LED light engine / OLED LED compact. Umodule STARK CLE 360 CLASSIC EM STARK CLE D LED light engine / OLED Umodule STARK CLE 3 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of

More information

LINEARLIGHT POWER FLEX LF06P2 TECHNICAL DATASHEET

LINEARLIGHT POWER FLEX LF06P2 TECHNICAL DATASHEET LINEARLIGHT POWER FLEX LF06P2 TECHNICAL DATASHEET Key Features & Benefits High-intensity LED light source Linear separable LED strip on flexible printed circuit board with self-adhesive back High quality

More information

LED BUILT-IN MODULES. LUGA Shop 2015 PCB LED Modules COB for Retail Environments PEARL WHITE LUGA SHOP 2015 PCB PEARL WHITE

LED BUILT-IN MODULES. LUGA Shop 2015 PCB LED Modules COB for Retail Environments PEARL WHITE LUGA SHOP 2015 PCB PEARL WHITE LED BUILT-IN MODULES LUGA SHOP 2015 PCB PEARL WHITE LUGA SHOP 2015 PCB PEARL WHITE LED MODULES COB FOR RETAIL ENVIRONMENTS DMS099S31FP / DMS120S31FP / DMS150*31FP Typical Applications Integration in reflector

More information

Experience bright and vivid colors

Experience bright and vivid colors Fortimo LED Fortimo LED SLM Food 1211 L19 2828 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM Food 1211 L19 2828 G 6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality

More information

Bridgelux Vero SE 29 Array Series. Product Data Sheet DS123

Bridgelux Vero SE 29 Array Series. Product Data Sheet DS123 Bridgelux Vero SE 29 Array Series Product Data Sheet DS123 1 Introduction Vero SE Vero SE is a revolutionary light source system that integrates Bridgelux s seventh generation COB technology with poke-in

More information

Bridgelux Vero SE 29 Array. Product Data Sheet DS123

Bridgelux Vero SE 29 Array. Product Data Sheet DS123 Bridgelux Vero SE 29 Array Product Data Sheet DS123 1 Introduction Vero SE Vero SE is a revolutionary light source system that integrates Bridgelux s seventh generation COB technology with poke-in connectivity

More information

LED MODULES. LUGA Shop Gen. 6 Retail and Industrial Lighting LUGA SHOP GEN LM TO 15,000 LM LUGA SHOP GEN. 6 RETAIL AND INDUSTRIAL LIGHTING

LED MODULES. LUGA Shop Gen. 6 Retail and Industrial Lighting LUGA SHOP GEN LM TO 15,000 LM LUGA SHOP GEN. 6 RETAIL AND INDUSTRIAL LIGHTING LED MODULES LUGA SHOP GEN. 6 1000 LM TO 15,000 LM LUGA SHOP GEN. 6 RETAIL AND INDUSTRIAL LIGHTING Typical Applications DMS124***H Integration in reflector luminaires Residential lighting Furniture lighting

More information

Dragon1 PowerStar Colours

Dragon1 PowerStar Colours Dragon1 PowerStar Colours ILH-GD01-xxxx-SC201-xx series Product Overview At the heart of each PowerStar is an Osram Opto Semiconductors Golden Dragon Plus LED giving outstanding brightness and luminance.

More information

Bridgelux Vero 29 Array Series. Product Data Sheet DS93

Bridgelux Vero 29 Array Series. Product Data Sheet DS93 Bridgelux Vero 29 Array Series Product Data Sheet DS93 1 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology and innovation. Vero LED light sources

More information

LED Modules. Fortimo SLM. Fortimo LED SLM Gen lm L13

LED Modules. Fortimo SLM. Fortimo LED SLM Gen lm L13 LED Modules Fortimo SLM Fortimo LED SLM Gen 4 2000lm L13 The Fortimo LED SLM Gen 4 is a next generation solution for spotlight and downlight applications. It is a product in line with the Fortimo brand

More information

Technical Application Guide LED Thermal Protection in OPTOTRONIC LED Power Supplies Light is OSRAM

Technical Application Guide LED Thermal Protection in OPTOTRONIC LED Power Supplies Light is OSRAM www.osram-americas.com/optotronic Technical Application Guide LED Thermal Protection in OPTOTRONIC LED Power Supplies Light is OSRAM LED Thermal Protection in OPTOTRONIC LED Power Supplies Contents Contents

More information

LED light engine / OLED LED compact. Umodule STARK CLE CLASSIC EM STARK CLE

LED light engine / OLED LED compact. Umodule STARK CLE CLASSIC EM STARK CLE D LED light engine / OLED Umodule STARK CLE 3-4 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of

More information

Bridgelux Vero. Product Data Sheet DS120. SE 10 Array

Bridgelux Vero. Product Data Sheet DS120. SE 10 Array Bridgelux Vero Product Data Sheet DS120 SE 10 Array 1 Introduction Vero SE Vero SE Series is a revolutionary light source system that integrates Bridgelux s seventh generation COB technology with poke-in

More information

High-density LED modules that sell

High-density LED modules that sell Fortimo LED Fortimo SLM C 930 PC 1204 L09 1619 G7 Datasheet High-density LED modules that sell Fortimo LED SLM PC 1204 L09 1619 G7 For retailers it is essential to create an atmosphere that keeps customers

More information