APT3500 Best performance 0.04% High Accuracy Five-year stability under Actual process conditions

Transcription

1 Doc. o. : C350005A Smart Pressure Transmitter for Differential / High Static / Gauge / Absolute Pressure Measurement MDL APT3500 Best performance 0.04% High Accuracy Fiveyear stability under Actual process conditions Duon System Co.,Ltd. AUTL, AUTL are trade mark of smart transmitter brand series to measure Pressure, Temperature and Level, which is manufactured & owned by DU System Co., Ltd(hereafter DU) since AUTL, AUTL series also provide services of electric appliance installation, repair of electric, magnetic measuring instruments, electric appliance repair, repair of instruments and appliances for measuring and testing, repair of computer hardware, repair of electronic application machines and apparatus, repair of instruments and appliances for rotating, repair of electric power distribution machines and apparatus, repair of control machines and apparatus, computer hardware maintenance and administration, computer hardware installation. APT3500Differential and high accuracy pressure Transmitter APT3100Differential pressure Transmitter, APT3200Gauge & Absolute pressure Transmitter, APT2100Temperature Transmitter, AI100Field Indicator.

2 Smart Pressure Transmitter APT3500 Standard SST Housing High Static Pressure Description of Product Function The APT3500 Smart Pressure Transmitter is a micro processorbased high performance transmitter, which has flexible pressure calibration and output, automatic compensation of ambient temperature and process variable, configuration of various parameters, communication with HAT protocol. The application is very various, as measuring liquid, gas or steam flow as well as pressure and liquid level by application method. All data of sensor is to be input, modified and stored in PM.» Flexible Sensor Input : DP, HS, GP, AP» Various utput : 4 ~20mA, Digital Signals» Setting Various Parameters : /, Trim, Unit, Failmode, etc.» Self Diagnostic Function : Sensor, Memory A/D Converter, Power, etc» Digital Communication with HAT protocol» xplosionproof Approval & Intrinsic Safety Approval : ATX, FM, FMCanada, KCs, etc.» Marine Certificate: ABS, L, B, DV Functional Block Diagram High Pressure UserSelectable Input DP/GP Measuring ange Sensor Part A/D Conversion Sensor PM Low Pressure MCU Part Microprocessor Input Sensor Value ngineering Units erange ( / ) Sensor Trimming Point Adjustment DA Trimming Damping / Filtering Transfer function LCD ngineering Mode Diagnostics Self Compensation Communications LCD Display Configuration Data DAC HAT 4~20mA HAT Protocol with Host * Subject to change without notice 2

3 Doc. o. : C350005A Features» Superior Performance High eference Accuracy : ±0.04% of Calibrated for range 1(DP & GP) ±0.10% of For spans less than 4:1, accuracy = ± [0.025 x (UL/span)] % of span for range 2 (DP & GP) ±0.10% of For spans less than 10:1, accuracy = ± [ x (UL/span)] % for ranges 3 ~ 5 (DP & GP & HS) ±0.040% of For spans less than 5:1, accuracy = ± [ x (UL/span)] % for DP6 & GP6 & HS7 & AP 3~5 ±0.075% of For spans less than 10:1, accuracy = ± [ x (UL/span)] % LongTerm Stability (0.125% UL for 5year) High angeability (100 : 1)(for the range 3~6)» Flexibility Data Configuration with HAT Configurator Point Adjustment» eliability Continuous SelfDiagnostic Function Automatic Ambient Temperature Compensation Failmode Process Function PM Write Protection C MC Conformity Standards (IC Series) Transmitter Description ATP3500 Pressure transmitter can be easily configured from any host that support the HAT protocol.» Basic Setup perational Parameters. 4~20mA Points (/) ngineering Units Damping Time : 0.25 ~ 60 sec Tag : 8 alphanumeric characters Descriptor : 16 characters Message : 32 characters. Date : day/month/year» Calibration and Trimming Lower/Upper ange (zero/span) Sensor Trimming Point Adjustment DAC utput Trimming Transfer Function SelfCompensation» SelfDiagnosis and thers CPU & Analog Module Fault Detection Communication rror Failmode Handling LCD Indication Temperature Measurement of Sensor Module Function» ange and Sensor Limits efer to Table 1.» and Adjustment Limits and span values can be set anywhere within the range limits stated in Table 1.(Page 9) must be greater than or equal to the minimum span stated in Table 1.(Page 9)» utput (Analog Current and Digital Data) LCD Display & G Mode Two wire 4~20mA userconfigurable for linear or square root output, digital process value superimposed on 4~20mA signal, available to any host that conforms to the HAT protocol» Power Supply & Load equirement xternal power supply required. * 250 ohm load 17.5 Vdc * up to a 550 ohm load 24 Vdc Max. Loop esistance = ( 12 ) / ( = Power Supply Voltage) Voltage ange : 12 to 45 Vdc Voltage ating : 24 Vdc ±30% Loop Load 0 ~ 1500 ohm peration 250 ~ 550 ohm HAT Communications» MC Conformity Standards IC Series» Failure Mode Fail High : Current 21.1 ma Fail Low : Current 3.78 ma» Storage Temperature 40 to 85 (without condensing)» Process Temperature Limits (ange codes and approval codes may effect limits) 40 to 120 ( 104 to 248 ) SMAT PSSU TASMITT Duon System Co.,Ltd. 02_03 DU SYSTM 3

4 Smart Pressure Transmitter Function» Isolation Input/output isolated to 500Vrms (707 Vdc)» Working Pressure Limits (silicone oil) Model D & G 0 ~ 5 MPa # 1 0 ~ 13 MPa # 2 0 ~ 25 MPa # 3~6 Model HS 0 ~ 32 MPa # 3~5 0 ~ 75 MPa # 7 Model AP 0 ~ 0.25 MPa # 3 0 ~ 1.5 MPa # 4 0 ~ 2.5 MPa # 5» Hydrostatic Test Pressure Model D & G 8 MPa # 1 20 MPa # 2 38 MPa # 3 ~ 6 Model HS 48 MPa # 3~5 60 MPa # 7 Model AP 0 ~ 0.38 MPa # 3 0 ~ 2.25 MPa # 4 0 ~ 3.75 MPa # 5» Burst Pressure Model D & G 69 MPa # 1 ~ 6 Model HS 132 MPa # 3~5 80 MPa # 7 Model AP 1.05 MPa # 3 4 MPa # 4 7 MPa # 5» 5 Digit LCD xpress all pressure unit and flow unit. Use 5 digit. Select decimal place (0 to 4) PV, % and ma value indicate on LCD rotationally & automatically.» Change main parameter by Button Change Unit Change Upper range value Change Lower range value Change the Damping Second Select the Decimal Place Trim Adjustment Moving within Menu : Moving to below Menu : Moving Top Menu : +» User define unit function 4

5 Doc. o. : C350005A Button Menu tree» Button Menu tree MAL Trim CACL SAV + span Menu 1Trim 11 ZTIM 12 ZADJ 13 LPT PV Trim Adjustment Loop Test CACL SAV 2 Setup 3 LCD 21 UIT 22 UG 23 LG 24 DAMP 25 TFUC 26 LWCUT PV 31 LCDMD 32 DCPL Change Unit Change Upper ange Value Change Lower ange Value Damping Second Select Transfer Function Select Lowcut & Cut rate CACL SAV Change LCD Mode Decimal Place SMAT PSSU TASMITT CACL SAV 33 GMD 331 UV 332 LV 333 UIT 331 TF PV Change ngineering UV Change ngineering LV Change ngineering Unit Select ngineering Transfer Function PV CACL SAV 4 DVIC 41 BLCK 42 MST 43 PADD PV Select Button Lock Master eset Change HAT Polling Address All state zero + span XIT DU SYSTM 5

6 Smart Pressure Transmitter Physical Specifications» Wetted Materials Isolating Diaphragms 316L SST, Monel, Tantalum, HASTC Drain/Vent Valves 316 SST, HASTC Flanges and Adapters 316 SST(ASTM), HASTC ring Viton, PTF» onwetted materials Fill Fluid Silicone oil or Inert fill Bolts 304 SST lectronics Housing Aluminum or 316L SST (ption) Flameproof and Waterproof (IP67) Cover ring Buna Paint poxypolyester or Polyuret Mounting Bracket 304SST with Ubolt (304SST) for 2inch pipe ameplate 304 SST» lectrical connections 1/214 PT conduit with M4 Screw Terminals» Process Connections 1/418 PT on inch (54.0 mm) centers on flanges for Standard 1/214 PT on Process Adapter (option) * efer to drawing in the last page» Weight 3.51 kg ( Standard excluding options ) 5kg (SST Housing excluding options) xploded drawing of APT3500 ameplate and Adjustments AUTL lectronics Housing Terminal Board Main Board Terminal Block Cover ring Cover Digital Indicator AUTL Housing otation Set Screw Certification Plate Sensor Module Process ring Flange Bolt Standard Flange Flange Adapter Drain/Vent Valve 6

7 Doc. o. : C350005A Hazardous Location Certifications (option)» KCs xplosiveproof K1 Code : Type : Flameproof (x d IIC T6, IP67 ( 20 C Tamb +60 C )) Certificate o. : 12AV2B0741 Power Supply : 12.5 ~ 45Vdc, 4 ~ 20mA, Process Temperature : +80 C» ATX Approvals 1 Code : Type : ATX xplosionproof Certification ATX Certification o. : DV 14 ATX 5433X Standards : : : 2007 perating Temperature: 20 0 C Tamb C x II 2 G x d IIC T6...T4, IP66/67 Vcd = 12.5 ~ 45Vdc, 4~20mA» KCs Intrinsic Safety Certification K2 Code :» FM and FMc Certification F1 & F2 Code :» ATX Certification 2 Code : * Intrinsic Safety: x ia IIC T5 or T4 perating Temperature : For T5: 40 0 C to C For T4: 40 0 C to C Ui=30V, Ii=130mA, Pi=0.75W, Ci=40nF, Li=104μH ATX Certificate o.: Baseefa17ATX0003X ICx Certificate o.: ICx BAS X * Some certificates are on pending for approval. Please ask us before order. Connection Diagram of Signal, Power, HHT for Transmitter + Local test or emote Indicator (Low impedance) Field + Control oom 250~550 hm + + Power Supply or Analog Module of Controller SMAT PSSU TASMITT PW TST CMM TST PC Configurator <475> HAT modem (HAT/S232) <475> (HAT Communicator) or PC Configurator may connected at any termination point in the signal loop. 2. HAT Communication requires a loop resistance between 250 and Vdc 3. Power Supply Voltage ange : 12 to 45 Vdc Voltage ating : 24 Vdc ±30% DU SYSTM 7

8 Smart Pressure Transmitter APT3500 Bottom Connection for Vertical Process Line asy Installation, Vertical Process line. Industrial standard connection. ot require additional retrofitted Flanges or Adapters. Background Traditionally, some of applications require vertical installation such as flow application, orifice assemble line, special location and etc. The traditional connections may require additional flanges or adapters, which is inconvenience and additional charge. (xcept changing size of process connection). Advantage Direct connection from vertical process line with manifold. And it is not required additional retrofitted flanged or adapter to connect vertical process line or assemble manifold because it has industrial standard size 54 mm between L & H process connection in the transmitter. Moreover, Manifold can be connected directly. Dimension lectric Connection 1:1/214PT 2:G1/2 one Digital Indicator Standard Process Connection 1/418PT 83 Adapter for 1/214PT 8

9 Doc. o. : C350005A General Specifications (angeability : #1=20:1 / #2=50:1 / 4~6=100:1) 1. APT3500 Pressure Sensor ange ange Code Calibrated (KPa) DP GP AP HS Lower ange(kpa) Calibrated (KPa) Lower ange(kpa) ~ ~ ~ ~ Calibrated (KPa) Lower ange(kpa) Calibrated (KPa) <Table 1> Lower ange(kpa) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ (Gauge nly) Code KPa Kgf/cm2 bar psi inh2@4 0 C mmh2@4 0 C inhg@0 0 C lectrical Specifications Power Supply 12 to 45 Vdc utput Signal 4 ~ 20 ma dc / HAT HAT loop resistance 250 ~ 550 ohm Isolation 500 Vrms (707 Vdc) 3. Performance Specifications eference Accuracy Ambient Temp. ffect Static Pressure ffects ± 0.04% of *See the specification feature on 3pgae ange 1(DP&GP) ±[0.2% UL+0.08% ] / 28 C ange 2(DP&GP) ±[0.13% UL+0.12% ] / 28 C ange 3~6(DP,GP,HS) ±[0.024% UL+0.045% ] / 28 C HS7, AP3~5 ±[0.019% UL+0.125% ] Ambient Temperature LCD Meter Ambient Temp Humidity Limits Process Temperature Limits 40 ~ C 30 ~ C 5% ~ 100% H 40 0 C ~ C Stability ±0.125% UL for 60 Months Power Supply ffects ±0.005% of per Volt ange 1 ange 2 ange 3~6 ange 1 ange 2 ange 3~6 ±0.12% of UL per 0.7MPa ±0.25% of UL per 7MPa ±0.05% of UL per 7MPa ±0.15% of reading per 0.7MPa ±0.4% of reading per 7MPa ±0.1% of reading per 7MPa Position ffect (90degree) Mounting Position ffects Shift up to ± 0.4 KPa Shift up to 400Pa o ffect SMAT PSSU TASMITT 4. Physical Specifications Isolating Diaphragm 316L SST Process Connection Size 1/4 18 PT Drain & Vent Valve 316 SST (Adapter ption) 1/2 14 PT Flange & Adapter 316 SST lectrical Connections 1/2 14 PT with M4 ring Viton, PTF Weight (excluding ption Items) 3.51 Kg (Standard) 5 Kg(SST Housing) lectronic Housing Aluminum (ption:316l SST) 2 Pipe Stanchion Type bracket Angle or Flat type Bolts & Bolting Flange 304 SST Housing Class Waterproof (IP67), 4X DU SYSTM 9

10 rdering Information Smart Pressure Transmitter MDL Code Description D Differential Pressure Transmitter (Static Pressure 25MPa) APT3500 HS Differential Pressure Transmitter for High Line Pressure (Static Pressure 32MPa) /APT3500 (uclear) G Gauge Pressure Transmitter A Absolute Pressure Transmitter DP GP AP HS Calibrated Lower Calibrated Lower Calibrated Lower Calibrated Lower (KPa) ange(kpa) (KPa) ange(kpa) (KPa) ange(kpa) (KPa) ange(kpa) ~ ~ ~ ~ ~ ~ ~ ~ anges ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ (Gauge nly) 0 X Special Body Flange & Adapter Vent Plug Diaphragm M SST 316 SST 316 SST 316L SST M SST 316 SST 316 SST HAST C Mounting M SST 316 SST 316 SST Monel Flange /Material M SST 316 SST 316 SST Tantalum *M SST HAST C HAST C HAST C *M SST HAST C HAST C Monel *M SST HAST C HAST C Tantalum K0 Maker Standard (Waterproof:IP67) Hazardous K1 KCS Flameproof Approval *K2 KCS Intrinsic Safety Approval Location 1 ATX(KMA) Flameproof *2 ATX(KMA) Intrinsic Safety Certifications *I1 ICx Flameproof *I2 ICx Intrinsic safety *F1 FM&FM Canada xplosion proof *F2 FM&FM Canada Intrinsic Safety Fill Fluid 1 Silicone (DC200) 2 Inert fill fluid (Halocarbon oil) Process 1/214 PT S 1/4 18 PT (Standard) Connection Female(Adapter) X Special G1/214 poxy lectrical 1/214PT 1 2 Polyester Painted Connection poxypolyester Painted Aluminum Aluminum(Adapter) X Special M1 LCD Indicator(5digit) BC Bottom Process Connection LPI Lightning Protector (Internal) LP Lightning Protector (xternal) K il Free Finish F1 Side Vent / Drain Top F2 Side Vent / Drain Bottom ption 2W 2 Way Manifold (SST) : emote type 2WF Flange type 3W 3 Way Manifold (SST) : emote type 3WF Flange type 5W 5 Way Manifold (SST) : emote type 5WF Flange type BA Stainless Steel Bracket (Angle type) with SST Bolts BF Stainless Steel Bracket (Flat type) with SST Bolts ST Stainless Steel Housing T Teflon ing (Wetted Part) X Special 10 xample : APT3500D5M1111S1M1BA ote 1 : equest to manufacturer for Draft ange, Absolute (small pressure and vacuum) and Items marked * before order.

11 GI D CF3M I X P L S IV A T D IV S XXXX C I AU FILD TMIALS Doc. o. : C350005A Installation With Mounting Bracket 2 Pipe Mounting Bracket Model Angle Type XXXX P H SP TM WHIL A L GI AUTL P Z X D TI SMAT PSSU TASMITT APT3100 SIS MDL. : CAL. : SUPPLY : 11.9 to 45 VDC MAX W.P.: UTPUT : 4 to 20 ma + HAT TAG. : SIAL. : Standard Model 2 Pipe Mounting Bracket Model Flat Type 110 MP Model SMAT PSSU TASMITT s Z D C AU TI WHIL AUTL TM P T H SP LCK LCK Standard Model MP Model DU SYSTM 11

12 IV IV Dimensions of Transmitter (mm) Standard Model 86 lectric Connection 112 GI Z D C AU TI I X 1:1/214PT 2:G1/2 s 113 WHIL P AUTL T D H SP P L S TM A one Digital Indicator LCK FILD TMIALS LCK 198 one 85 41,3 CF3M Side Drain / Vent Valve Standard Process Connection 1/418PT XXXX 54 Adapter for 1/214PT 84 High Static Pressure Model 86 lectric Connection 1:1/214PT 2:G1/ one Digital Indicator one Side Drain / Vent Valve Standard Process Connection 1/418PT 54 Adapter for 1/214PT 120 Intrinsically safe Model 86 lectric Connection 119 GI Z D C AU TI I X 1:1/214PT 2:G1/2 s 113 WHIL P AUTL T D H SP P L S TM A one Digital Indicator LCK FILD TMIALS LCK 198 one 85 41,3 CF3M Side Drain / Vent Valve Standard Process Connection 1/418PT XXXX 54 Adapter for 1/214PT 84 Duon System Co.,Ltd , GDA, GUPSI, GYGGID, KA Tel : Fax : Web : Copyright DuonSystem Co., Ltd. Jul. 2016