ULTRA & ULTIMATE NT SUPERSPRAYERS

Transcription

1 Operator s Manual ULTRA & ULTIMATE NT SUPERSPRAYERS IMPORTANT THE OPERATOR IS RESPONSIBLE FOR ADJUSTING THE MACHINE SINCE MACHINE DOES NOT COME FIELD READY FROM FACTORY. CAUTION READ & UNDERSTAND OPERATOR S MANUAL BEFORE USING MACHINE. See for latest version of all Summers Operator s Manuals SUMMERS MANUFACTURING CO., INC. WEB SITE: MADDOCK, NORTH DAKOTA (70) DEVILS LAKE, NORTH DAKOTA (70) Z06S Summers Mfg. Co., Inc. 04 Printed in USA

2 Warranty Summers warrants only products of its manufacture against operational failure caused by defective materials or workmanship which occur during normal use within months from the date of purchase by the end user from Summers dealer. Summers obligation is to replace free of charge any part of any product that Summers inspection shows to be defective excluding transportation charges to Maddock, ND or Devils Lake, ND and return and also excluding all transportation costs from Summers dealer to the dealer s customer and all other costs such as removal and installation expense. Summers shall not be liable for loss of time, manufacturing costs, labor, material, loss of profits, consequential damages, direct or indirect, because of defective products whether due to rights arising under the contract of sale or independently thereof, and whether or not such claim is based on contract, tort or warranty. Written permission for any warranty claim return must be first obtained from authorized Summers personnel. All returns must be accompanied with a complete written explanation of claimed defects and the circumstances of operational failure. Written warranty for all component parts used in the manufacture of Summers products is available upon request. Warranty of such component parts will be determined by said component manufacturer upon their inspection of the claimed defective part. This express warranty is the sole warranty of Summers. There are no warranties, which extend beyond the warranty herein expressly set forth. The sales for products of Summers under any other warranty or guarantee express or implied is not authorized. This warranty voids all previous issues. SUMMERS MANUFACTURING CO. INC. MADDOCK, NORTH DAKOTA DEVILS LAKE, NORTH DAKOTA 5830 /95 IH 4/04

3 INTRODUCTION This manual provides the following information about your Summers Field Sprayer. SECTION CONTENTS Section SAFETY explains important safety precautions and familiarizes the Operator with the decals and their locations. Section GENERAL INFORMATION describes standard and optional features of the sprayer. Section 3 SPRAYER OPERATION provides all necessary information for the operation and adjustment of the sprayer. Section 4 MAINTENANCE covers both spraying system and mechanical maintenance plus proper cleaning and storage. Section 5 TROUBLESHOOTING provides a quick reference to solving problems. Section 6 OPTION NOTES AND INSTRUCTIONS explains installation and operation of available options. Section 7 SPECIFICATIONS lists important dimensions, capacities and other technical information. Section 8 PARTS OTHER ITEMS OF IMPORTANCE A. Summers Mfg. Co., Inc. strongly recommends that each Field Sprayer Operator READ and UNDER- STAND the Operator s Manual before using the machine. In addition, this Operator s Manual should be REVIEWED at least ANNUALLY thereafter. B. It is the policy of this company to improve its products whenever possible and practical to do so. We reserve the right to make changes or improvements in the design or construction of parts at any time without incurring obligations to install such changes on products previously delivered. C. Reference to right and left in this manual is determined from a seated position in the drivers seat. D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part Number when ordering replacement parts from your Summers dealer. See back section of manual for description of each Part Number. For the latest version of all Operator s Manuals scan the symbol to the left and choose which manual you would like to view/print from our website. OWNER REGISTER Name Address City State/Prov. Mail Code Size Serial Number (located on frame) Date Purchased Dealer i

4 TABLE OF CONTENTS SECTION - SAFETY Safety-Alert Symbol... General Safety Practices... Safety During Transport... Safety Decals... Decal Locations...7 SECTION SPRAYER OPERATION Sprayer Operation Safety... Initial Set-up and Adjustment of Mechanical (Transport to Field Operation)... Initial Set-up and Adjustment of Sprayer System...7 Testing and Adjustment of Sprayer System...4 Transporting and Operation of Sprayer from Field to Field...3 Sprayer Field Operation and Adjustment...4 Calibration of Sprayer System...5 Unhooking Sprayer From Tractor...8 SECTION 3 MAINTENANCE Maintenance Safety...3. Daily Maintenance...3. Off Season Storage...3. Preseason Annual Maintenance SECTION 4 TROUBLESHOOTING Sprayer System Troubleshooting...4. Mechanical Troubleshooting...4. SECTION 5 ELECTRICAL schematics Wiring diagram for electric ball valves...5. Hydraulic control switch box Cart connector wire harness Cart valve wiring harness Ultimate boom harness SECTION 6 OPTION NOTES AND INSTRUCTIONS 8S9476 Electronic Pressure Gauge L4957 Equal Boom Split Option L990 Control Grip S9956 Rinse Nozzle Without Rinse Tank S9950 Rinse Tank Option W/Wand S9936 Values E & R Cross Over Plumbing Options F390/8F3904 End Nozzle Option S9366 Single Separate Tiplift Circuit F9980 Foam Marker L9 Boom Clean Out Option S Bottom Fill Flow Meter Package S994 - Cleanload Package S990 - Electric Agitator Shutoff Package L430/3 - Pilot Operated Check Valve SECTION 7 SPECIFICATIONS Sprayer Sizes and Nozzle Quantity...7. Overall Width and Length Dimensions...7. Tire Specifications and Cart Wheel Spacings...7. Tank Specifications...7. ii

5 TABLE OF CONTENTS Overall Height and Clearance Dimensions...7. Miscellaneous Component Specifications Plumbing Specifications Bolt Torque Specifications SECTION 8 - PARTS 8S x 8 Cart Pkg & Tank Pkg Gallon S x 8 Cart Pkg & Tank Pkg Gallon S9376 4X8 Cart Pkg & Tank Pkg S933 Narrow Cart Pkg Gallon S9334 Narrow Cart Pkg 50 Gallon S9336 Narrow Cart Pkg 500 Gallon S9338 Narrow Cart Pkg 650 Gallon S9398A Standard Axle Pkg S9399A Wide Axle Package S9400A Beet Axle Package S940A Wide Axle Package - Narrow Cart S940A Narrow Axle Package - Narrow Cart S953A Spindle Holder w/5,000# Hub Package S9534A Spindle Holder w/5,000# Hub Package S9393U Single 480/80R38 Tractor Tire/Rim Pkg S9397 Single 380/90R46 Tractor tire/rim Pkg S9397D Dual 380/90R46 Tractor Tire/Rim Pkg ( Spacing) S9397E Dual 380/90R46 Tractor Tire/Rim Pkg (30 Spacing) S9945 Single 70 Gallon Rinse Tank Pkg S9946 Dual Side 40 Gallon Rinse Tank Pkg S9450 Common Plumbing Pkg S995 Triple Electric Ball Valve Pkg S9463 Stainless Steel Hydraulic Pump Pkgs S9453A Std Cap/Pressure Hydraulic Flanged Pump Pkgs S9460/8S9458/8S946 PTO Std Cap/Pressure Pump Pkgs S946 Belt Drive PTO Std Cap/Pressure Pump Pkg S9466 9HP Honda Pump Pkg S Control Plumbing Pkg S Plumbing Pkg S9475U/8S9478/8S9479V Control System Pkgs S9476 Electronic Pressure Gauge Pkg L Part Boom Pkg L Part Boom Pkg L Part Boom Pkg L003 Ultimate Electric/Hydraulic Control L005 Ultra Electric/Hydraulic Control L Part Boom Pkg L Part Boom Pkg L Part Boom Pkg L700 0 Part Boom Pkg L700 0 Part Boom Pkg L Part 3 Boom Pkg L703 0 Part 3 Boom Pkg iii

6 TABLE OF CONTENTS 8L Boom Pkg L Boom Pkg L4957 Equal Boom Width Option L Center Wet Boom Pkgs L Center Wet Boom Pkgs L750/8L Center Wet Boom Pkgs L74 50 Part Wet Boom Pkgs L740/8L Part Wet Boom Pkgs L730/8L Part Wet Boom Pkgs L70/8L70 0 Part Wet Boom Pkgs L70/8L70 0 Part Wet Boom Pkgs L Part 3 Wet Boom Pkg L73 0 Part 3 Wet Boom Pkg L706/8L Part 3 Wet Boom Pkgs L703/8L Part 3 Wet Boom Pkgs L660 8L630 Windshield Pkgs L990 Control Grip Pkg S999 Chemical Eductor Pkg S9939 Cross Over Plumbing Pkg S9956 Rinse Nozzle Main Tank w/o Rinse Tank S9954A Wash Wand Package W/O Tank F390 End Nozzle, Manual F3903 Ultimate Single Electric End Nozzle F3904 Ultra Single Electric End Nozzle Electric End Nozzle Solenoid SCS-03/05 and 440/450 Control Console Components L0050A Hydraulic Control Switch Box Nozzle Body Components A308 Boom Line Strainer K87 Ultra Light Mounting Pkg K87 Ultimate Light Mounting Pkg F9980 Foam Marker Option Hydraulic Pump Components PTO Pump Components Hub and Axle Components A560 Manifold Electric Ball Valve RFM 60 P Flowmeter Replacement Parts OTHER MANUALS AND INFORMATION PROVIDED: Hydraulic or PTO Pump Manual Raven Sprayer Control Systems manual (for Raven SCS-05 Control ) Raven SCS-450 manual (for SCS-450 Control ) English / Metric Application Rate Chart iv

7 SECTION -. SAFETY ALERT SYMBOL SAFETY This symbol is an alert to the potential for personal injury. This symbol means ATTENTION! BECOME ALERT! YOUR PERSONAL SAFETY IS INVOLVED! DEFINITION OF EACH SIGNAL WORD USED IN CONJUNCTION WITH THE SAFETY-ALERT SYMBOL: DANGER WARNING CAUTION Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme hazards. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. USING CHEMICALS? HIGH HAZARD REQUIRES: *goggles *respirator *avoid fumes *rubber gloves and skin protection MODERATE HAZARD REQUIRES: *goggles *avoid fumes *rubber gloves and skin protection LOW HAZARD: REQUIRES: *avoid fumes *rubber gloves and skin protection. PROTECT YOURSELF!. REFER TO SIGNAL WORD AND REQUIRED PERSONAL PROTECTIVE EQUIPMENT WHEN USING CHEMICALS.. ALWAYS READ AND FOLLOW CHEMICAL MANUFACTURERS WARNINGS, INSTRUCTIONS AND PROCEDURES BEFORE USING. 3. HANDLE CHEMICALS WITH EXTREME CARE. 4. IN CASE OF POISONING, GET IMMEDIATE MEDICAL ATTENTION. A CONTAINER LABEL MAY BE BENEFICIAL FOR QUICK TREATMENT. 5. BE SAFE!

8 SECTION - SAFETY. GENERAL SAFETY PRACTICES. READ AND UNDERSTAND Operator s Manual before using machine. Review at least annually thereafter.. VERIFY all safety devices and shields are in place before using machine. 3. KEEP hands, feet, hair and clothing away from moving parts. 4. STOP engine, place all controls in neutral, set parking brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, maintaining or unplugging. 5. BE CAREFUL when working around high-pressure hydraulic system. 6. DO NOT ALLOW RIDERS. 7. USE EXTREME CARE when cleaning, filling or making adjustments. 8. ALWAYS READ chemical container label carefully and follow chemical manufacturers WARNINGS, instructions and procedures before using. 9. AVOID having excess chemical stored after spraying. 0. ONLY STORE chemicals in their original containers in a locked area.. KEEP CHILDREN AWAY from chemicals and sprayer equipment.. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing or disconnecting from tractor. DANGER! HITCH MUST BE ANCHORED TO TRACTOR TO PREVENT OVER CENTER CONDITION WHEN FOLDING OR UNFOLDING BOOMS. NEVER FOLD OR UNFOLD SPRAYER WITH- OUT A PROPER CONNECTION TO TRACTOR..3 SAFETY DURING TRANSPORT. ONLY TOW at a safe speed. Maximum implement towing speed is 5 MPH. Use caution when making corners or meeting traffic.. USE a safety chain between tractor drawbar and sprayer hitch when transporting on public roads. 3. ALWAYS secure folded booms to transport rest when transporting on public roads. If towing a long distance tie end booms together above sprayer tank..4 SAFETY DECALS. KEEP SAFETY DECALS CLEAN.. REPLACE missing or unreadable decals. New decals are available from your Summers dealer by stating correct part number (PN) located on the decal..

9 SECTION - SAFETY 3. PN 8Z004 SUMMERS DECAL. 4. PN 8Z0086 ELECTROCUTION DANGER DECAL. DANGER AVOID CONTACT WITH ELECTRICAL LINES. SERIOUS INJURY OR DEATH CAN RESULT. 8Z PN 8Z0087 PINCH POINT HAZARD DECAL. DANGER FRAME PINCH POINT HAZARD KEEP AWAY To prevent serious injury or death from crushing: 8Z PN 8Z0089 CONFINED SPACE HAZARD DECAL. DANGER CONFINED SPACE HAZARD To prevent serious injury or death: 8Z0089.3

10 SECTION - SAFETY 7. PN 8Z490 ULTIMATE NT DECAL. 8. PN 8Z495 ULTRA DECAL. 9. PN 8Z076 GENERAL CAUTION DECAL..4 CAUTION. Read and understand Operator s Manual before using machine.. For Sprayers: a. Read and follow chemical manufacturers WARNINGS, instructions and procedures before using. b. Use recommended personal protective equipment to reduce or eliminate chemical contact. c. Never run pump dry. 3. Verify all safety devices and shields are in place before using machine. 4. Keep hands, feet, hair and clothing away from moving parts. 5. Stop engine, place all controls in neutral, set parking brakes, remove ignition key and wait for all moving parts to stop before servicing, adjusting, maintaining or unplugging. 6. Be careful when working around high pressure hydraulic system. 7. Do not allow riders. 8. Check all wheel bolts DAILY for tightness. 9. Refer to Operator s Manual for periodic and annual maintenance. 0. For Towed Implements, DO NOT EXCEED 0 MPH. 8Z076

11 SECTION - SAFETY 0. PN 8Z078 WHEEL TIGHTENING DECAL. TIGHTEN ALL WHEEL BOLTS DAILY! 5/8 (8-BOLT) 40 FT-LB. 3/4 (0-BOLT) 50 FT-LB. /8 INNER BUDD NUT 450 FT-LB. /8 OUTER BUDD NUT 450 FT-LB.. PN 8Z084 NT TELESCOPING AXLE DECAL. 8Z078 A AXLE PLATE CAUTION CART NARROW AXLE WHEEL SPACING (8S9398) TIRES =" =3" =7" =" =4" =7.5" = " =3" 4 /9 3 - " " 96" " 9" 4" " 3 / " " " 96" " 9" 4" " CART WIDE AXLE WHEEL SPACING (8S9399) TIRES =/" =6" =" = " =" / 3 9" " 3" 44" 5" /9 46 9" " 3" 44" 5" CART BEET AXLE WHEEL SPACING (8S9400) TIRES =" =5" =.5" =7" =3" / 3 " 96" 9" " 3" /9 46 " 96" 9" " 3" PN 8Z086 NARROW CART TELESCOPING AXLE DECAL. A AXLE PLATE CAUTION CART NARROW AXLE NARROW CART WHEEL SPACING (8S940) TIRES =.75" =6.75" =.75" =.75" =5.5" / 3-7" 76" " 9" / " 7" 76" " 9" / / CART WIDE AXLE NARROW CART WHEEL SPACING (8S940) TIRES =.75" =.75" =7.5" =.5" =7.5" =9.5" / 3 76" " 9" 99" 9" 3" / " " 9" 99" 9" 3" / / / /

12 SECTION - 3. PN 8Z088 RINSE TANK DECAL. SAFETY 4. PN 8Z090 SINGLE TANK PLUMBING DECAL..6

13 SECTION - 5. PN 8Z09 DUAL TANK PLUMBING DECAL. SAFETY 6. PN 8Z NT SIGHT TUBE DECAL. 7. PN 8Z NARROW SIGHT TUBE DECAL. 8. PN 8Z NT SIGHT TUBE DECAL. 9. PN 8Z NT SIGHT TUBE DECAL. 0. PN 8Z NT SIGHT TUBE DECAL..7

14 SECTION - SAFETY.5 DECAL LOCATIONS 8Z0087 8Z088 (RINSE TANK) 8Z090 (SINGLE TANK) 8Z09 (DUAL TANK) 8Z0500 8Z0089 8Z084 8Z086 8Z076 GENERAL CAUTION 8Z0300 (600 GAL) 8Z099 (500 GAL) 8Z094 (50 GAL) 8Z097 (000 GAL) SIGHT TUBE DECAL 8Z078 8Z " SUMMERS DECAL /7/04 8S9370.iam/000 GAL ULT NT CART PKG.8

15 SECTION - SPRAYER OPERATION. SPRAYER OPERATION SAFETY. READ AND UNDERSTAND Operator s Manual before using machine.. DO NOT ALLOW RIDERS. CAUTION REVIEW SECTION. SPRAYER OPERATION SAFETY BEFORE PROCEEDING 3. ONLY TOW at a safe speed. Use caution when making corners or meeting traffic. 4. USE a safety chain between tractor drawbar and sprayer hitch when transporting on public roads. 5. ALWAYS fold booms into transport rest and secure when transporting on public roads. 6. STOP engine, place all controls in neutral, set parking brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, maintaining, or unplugging. 7. KEEP CHILDREN AWAY from chemicals and sprayer equipment. 8. USE EXTREME CARE when cleaning, filling or making adjustments. 9. USING CHEMICALS? PROTECT YOURSELF! HIGH HAZARD REQUIRES:. REFER TO SIGNAL WORD AND REQUIRED *goggles PERSONAL PROTECTIVE EQUIPMENT WHEN *respirator USING CHEMICALS. *avoid fumes *rubber gloves and. ALWAYS READ AND FOLLOW CHEMICAL skin protection MANUFACTURERS WARNINGS, INSTRUCTIONS AND PROCEDURES BEFORE MODERATE HAZARD USING. REQUIRES: *goggles 3 HANDLE CHEMICALS WITH EXTREME CARE. *avoid fumes *rubber gloves and 4. IN CASE OF POISONING, GET IMMEDIATE skin protection MEDICAL ATTENTION. A CONTAINER LABEL MAY BE BENEFICIAL FOR QUICK LOW HAZARD TREATMENT. REQUIRES: *avoid fumes 5. BE SAFE! *rubber gloves and skin protection 0. BE CAREFUL when working around high-pressure hydraulic systems.. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing or disconnecting from tractor.. VERIFY all safety devices and shields are in place before using machine. 3. KEEP hands, feet, hair and clothing away from moving parts..

16 SECTION - SPRAYER OPERATION. INITIAL SET-UP AND ADJUSTMENT OF MECHANICAL (CONVERT FROM TRANSPORT TO FIELD OPERATION). COMPLETE WARRANTY REGISTRATION CARD A. Complete and return WARRANTY REGISTRA- TION CARD located at the beginning of this manual. RETURNING CARD ENTITLES YOU TO A FREE GIFT. B. Complete the OWNER REGISTER also located at the beginning of this manual (Serial Number is located by the hitch piece). REMEMBER TO BRING OWNER REGISTER INFORMA- TION WHEN ORDERING PARTS.. LEVEL THE CART Before connecting to tractor, determine best vertical location of hitch piece in order to run a level cart: A. Level the cart front to back. B. Measure tractor drawbar to determine best vertical location of hitch piece. 3. MAKE TRACTOR TO SPRAYER HOOKUPS A. Make hitch connection using a draw pin with keeper and safety chain. A spacer between sprayer tongue and tractor clevis will minimize hitch noise and shock. B. Retract jack and rotate into storage position. C. Plug in hydraulics to tractor remote outlets for boom and hydraulic pump operation. D. Prepare to mount hydraulic switch control box in cab and run cable to rear of tractor.. Select a convenient location. Surface must be smooth and clean for suction cups to attach.. If tractor is equipped with factory accessory power plug, disconnect 3-foot pigtail lead from control box and couple to tractor power plug. 3. For tractors not equipped with a power plug connect black lead to a good ground and the other wire to a -volt keyed power supply. 4. Route 6 pin connectors through tractor cab to drawbar area and secure in a safe place. E. Hook all electrical leads to mating connectors near hitch.. CAUTION REVIEW SECTION. SPRAYER OPERATION SAFETY BEFORE PROCEEDING

17 SECTION - SPRAYER OPERATION NOTE! WHEN ELECTRIC/HYDRAULIC SWITCH BOX IS PROPERLY INSTALLED AND ENERGIZED THE GREEN POWER LIGHT WILL GLOW. IF GREEN LIGHT DOES NOT GLOW REVERSE ELECTRICAL LEADS. A 5 AMP RESETABLE CIRCUIT BREAKER IS PROVIDED ON THE BOX. IT MUST BE PUSHED IN FOR SWITCHES TO PERFORM THEIR FUNCTION. INDIVID- UAL SWITCHES WILL GLOW WHEN ACTIVATED. 4. ADJUST CART WHEEL SPACING A. Jack sprayer up so wheels are off the ground. B. Block frame up for safety while working on axle. C. Loosen front axle retainer bolts on each side D. Loosen bottom axle retainer bolts on each side. E. Remove inboard axle through bolt on each side. F. Slide axles to desired dimension. Refer to decal. G. Install inboard axle through bolts on both sides. H. Tighten bottom axle retainer bolts on each side. I. Tighten front axle retainer bolts on each side. WARNING! SPRAYERS EQUIPPED WITH DUAL WHEELS ARE NOT DESIGNED TO RUN WITH OUTSIDE WHEEL REMOVED. IF SINGLE WHEELS ARE NEEDED OPERATOR MUST REMOVE INNER WHEELS AND REPLACE WITH OUTSIDE WHEELS. HUB MUST REMAIN IN CENTER OF WHEEL FOOTPRINT..3

18 SECTION - SPRAYER OPERATION 5. UNFOLD BOOM FROM TRANSPORT TO FIELD POSITION A. Activate vertical height switch on control box and move tractor hydraulic lever to extend cylinders and lift booms out of transport brackets. B. Deactivate vertical height switch. C. Activate part boom fold switch and move hydraulic lever to unfold part booms. D. Deactivate part boom fold switch. E. Activate right and left CAUTION! tip-lift switches and move hydraulic lever to lower tip-lifts. F. Deactivate tip-lift switches. INNER BOOMS MUST BE COMPLETELY UNFOLDED BE- FORE UNFOLDING OUTER BOOMS. ONCE OUTER BOOMS ARE MOVED FROM TRANSPORT POSITION A SAFETY SWITCH IS OPENED PREVENTING FURTHER INNER BOOM MOVEMENT. G. If equipped with 3 boom sections, activate part boom switch and move tractor hydraulics to unfold part booms to field position. H. Deactivate part boom switch. WARNING! SPRAYER SHOULD BE PARKED ON A LEVEL SURFACE FOR FOLDING AND UNFOLDING OPERATIONS. AREA MUST BE CLEAR OF POWER LINES AND OTHER OBSTRUCTIONS. WARNING! OUTER MOST BOOM SWITCH MUST BE DEACTIVATED FOR BOOM TO BREAK AWAY WHEN CONTACTING AN OBSTRUCTION. FAILURE TO DEACTIVATE SWITCH WILL CAUSE PHYSICAL DAMAGE AND POSSIBLY BODILY INJURY. BOOM DAMAGE CAUSED BY FAILURE TO MAKE BREAK AWAY OPERATIVE WILL NOT BE WARRANTED. I. Activate part 3 boom switch and move tractor hydraulics to unfold part 3 booms to field position. J. Deactivate part 3 boom switch. 6. ADJUSTMENTS AT BOOM MIDDLE HINGE A. From boom end, verify that boom sections are lined up.. Adjust stop bolts to line up part, part and part 3 boom sections.. Loosen u-bolts securing outer boom spring latch and adjust latch mechanism to be centered on the latch pin. B. Adjust part boom cables, if equipped, so it is tight but not pulling the part section to fold. C. Adjust part or part 3 boom cylinder attachment spring cushion.. Unfold sprayer but do not turn off power to outer most boom fold switch.. Manually push on outer boom section to force a breakaway. Outer section should fold back -/ to feet after collapsing inner spring. Cylinder should not collapse. 3. Adjust inner nut and jam nut to insure a complete unfold. 4. Fold outer section of boom with tractor hydraulics to check if boom folds completely. 5. If booms do not fold completely adjust outer spring to permit complete folding. 6. Once adjustment is centered, tighten equally from each side until there is 3/6 /4 inch between all spring coils..4

19 SECTION - SPRAYER OPERATION 7. INNER BOOM CYLINDER SPRING CLEVIS ADJUSTMENT 8. ADJUSTMENT TO LEVEL SPRAYER BOOMS A. Park sprayer on a level surface. B. Level swinging center with a jack or blocks. C. Check level of each inner boom. Level adjustment is performed near tiplift cylinder on top of inner boom.. To adjust loosen jam nut near tiplift cylinder.. Adjust -/ bolt in or out until boom is level with swinging center. 3. Tighten jam nut to secure adjustment Figure 9. CHECK BOOM LEAD A. With booms unfolded; manually force booms rearward to collapse spring clevis on inner boom fold cylinders. Booms should not move rearward past a line extending straight out from sprayer boom swinging center. B. Perform any required adjustment at the part boom fold cylinder eyebolt. C. Verify both nuts are tight to secure the adjustment. 0. CHECK TIRE PRESSURES See specifications page 7. for proper tire inflation pressures. Maximum pressures are stamped on tire.. PERFORM DAILY MAINTENANCE A. Grease all points shown (See figure ). B. Verify all wheel bolts are tight. C. Check hydraulic components for leaks or frayed hoses. D. Inspect plumbing for leaks and problem areas. E. Perform general inspection for loose or missing parts..5

20 SECTION - SPRAYER OPERATION WARNING! PART BOOM FOLD CYLINDERS ARE MOUNTED WITH A SPRING CLEVIS ASSEMBLY. THE CLEVIS WILL ALLOW 5/8 OF AN INCH OF CYLINDER MOVEMENT. THE SPRING MUST BE TIGHTENED TO ALLOW FOR FULL TRAVEL WITHOUT THE COILS COMING IN CONTACT WITH EACH OTHER.. FOLD BOOM FROM FIELD TO TRANSPORT POSITION. A. Activate vertical height switch and raise booms completely. B. Deactivate vertical height switch. C. Activate part 3 boom switch and fold part 3 boom, if equipped.. D. Deactivate part 3 boom switch. E. Activate part boom switch and fold part booms. F. Deactivate part boom switch. G. Activate right and left tip lift switches together or separately and raise tip lifts. H. Deactivate tip lift switches. I. Activate part boom fold switch and fold part booms. J. Deactivate part boom switch. K. Activate vertical height switch and lower booms to transfer ALL weight of booms onto transport supports. NOTE! OUTER MOST BOOMS MUST BE COMPLETELY FOLDED BEFORE ANY INNER BOOMS WILL MOVE. IF INNER BOOMS DO NOT MOVE VERIFY THAT OUTER BOOMS HAVE FOLDED COMPLETELY AND CLOSED SAFETY SWITCH LOCATED NEAR RIGHT BOOM MID-HINGE. WARNING! WHEN SPRAYER IS TOWED WITHOUT A TRACTOR, BOOMS SHOULD BE SECURED TO TRANSPORT RESTS. THIS IS EASILY ACCOMPLISHED BY RUNNING A STRAP BE- TWEEN OUTER BOOMS NEAR THE TRANSPORT RESTS. CARE MUST BE TAKEN TO INSURE THE BOOMS REMAIN SECURE WHEN HYDRAULIC POWER IS NOT READILY AVAILABLE. 3. ADJUSTMENTS FOR TRANSPORT A. Park sprayer on a level surface. B. Adjust boom fold travel.. Fold sprayer booms up to transport rest.. Inner boom should just make contact with transport rest inner stop..6

21 SECTION - SPRAYER OPERATION a. Perform adjustment at rear of sprayer on part fold cylinder attachment by loosening 4 u- bolts and sliding spring clevis assembly left or right. There are two adjustment bolts to aid and to retain the new setting. b. Position head of adjustment bolt against spring clevis assembly. c. Tighten jam nut on adjustment bolt. d. Tighten all cylinder spring clevis u-bolts. e. Check boom lead again and adjust if necessary..3 INITIAL SET-UP AND ADJUSTMENT OF SPRAYER SYSTEM CAUTION REVIEW SECTION. SPRAYER OPERATION SAFETY BEFORE PROCEEDING WARNING! BEFORE HOOKING UP HYDRAULIC PUMP HOSES TO TRACTOR CONSULT TRACTOR MANUFACTURER S OPERATORS MANUAL. CONTINUOUS OPERATION OF HYDRAULIC MOTOR CAN HEAT UP TRACTOR HYDRAULIC FLUID AND CAUSE HARM TO HYDRAULIC SYSTEM. READ AND FOLLOW TRACTOR MANUFACTURERS RECOMMENDATIONS! HYDRAULIC PUMP NOTES: Many tractor hydraulic systems route return lines through filters or other restrictive elements which can cause in increase in return circuit pressure. Hypro s hydraulic motor oil seals are designed to withstand 300 PSI continuous pressure. However, whenever possible, it is recommended to utilize either a standard (or purchase an optional) low pressure return circuit. This will allow for less oil heat generation, lower horsepower consumption, and longer oil seal life. Consult with your tractor manufacturer to see if your tractor is or can be equipped in this way. The Return (or Tank) ports on Hypro hydraulic motors are equipped with an anti-reversing check valve. This is to prevent the motor from accidentally being operated backwards. Backward operation of the motor will cause almost immediate oil seal failure. Do Not Remove Check Valve. HM and HM4 models of Hypro s hydraulic motor driven centifugal pumps can be equipped with a metering orifice in the inlest port. The orifice is intended to be used on older model tractors with Closed Center systems that do not have flow control valves. Consult with your tractor manufacturer to determine if you have this type of system and require an orifice. Further information is available with your pump s operating manual. Hypro hydraulic motors are equipped with a bypass adjustment screw. These are only to bea adjusted when used on Open Center Hydrauic systems. Please see the installation instructions included with the pump for directions on how to use the bypass. Closed Center hydraulic systems do not require any bypass. Be sure that the bypass adjustment is screwed all the way in and the lock nut is tight when operating on Closed Center systems. There are four basic positions for each type of spool valve. They are Raise, Neutral, Lower, and Float (in order, from back to front). The names used for these positions vary somewhat between manufacturers, but the order of the positions do not. To properly operate a hydraulic motor-driven centifugal pump on a tractor hydraulic circuit, only the Lower and Float positions should be used. Use Lower for On and Float for Off. The Float position is recommended for turning the motor off because it allows the remote circuit to flow in a continuous loop allowing the motor to free wheel to a stop and also does not trap pressure in the circuit.. REVIEW PLUMBING INSTRUCTIONS FOR OVERALL VIEW OF SPRAYER SYSTEM FUNCTIONS Refer to pages.4,.5, and.6..7

22 SECTION - SPRAYER OPERATION. MAKE TRACTOR TO RAVEN SCS-05 SPRAYER SYSTEM HOOKUPS A. Plug hydraulic pump hoses into tractor remote outlet for hydraulic pump operation. B. Mount PTO pump on PTO output shaft of tractor (PTO pump optional). C. Hook up suction and discharge plumbing hoses (PTO pumps only). D. Mount Raven SCS-05 control in a secure and accessible location inside tractor cab. E. Make electrical and mechanical pressure sensing connections per drawing on page 5.. See Raven Sprayer Control Systems manual for additional information. F. Mount stick-on cable holders onto cart frame to secure Raven Control cable. 3. MAKE TRACTOR TO RAVEN SCS-450 SPRAYER SYSTEM HOOKUPS A. Plug hydraulic pump hoses into tractor remote outlet for hydraulic pump operation. B. Mount PTO pump on PTO output shaft of tractor (PTO pump optional). C. Hook up suction and discharge plumbing hoses (PTO pumps only). D. Mount Raven SCS-450 Control in a secure and accessible location inside tractor cab. E. Make electrical connections per drawing on page 5.. See Raven manual for additional information. F. To determine spraying width for programming your monitor use the following guidelines.. Determine number of boom shut off valves for each tank.. Verify which shut off the rear boom is connected to. 3. Determine the number of nozzles on each boom section. 4. Multiply the number of nozzles on each boom by the nozzle spacing. This is the boom width that should be programmed into the Raven console. 5. Each end nozzle covers approximately 7. Be sure to adjust the respective boom when the end nozzle is spraying. 4. ADJUST SPRAY HEIGHT - Adjust spray height to initial chart setting by setting vertical height. DEGREE TIP SPRAY HEIGHT TIP TO TARGET 80 7 TO TO 8 5. ADJUST SPRAY ANGLE Adjust spray angle so that nozzle is half way between front and back windshields or 30 degrees forward for sprayers without windshields..8

23 SECTION - SPRAYER OPERATION 6. DETERMINE TIP SIZE stamped number on orifice side identifies Tips. OPTIONAL END Part Number Tip Size TIP MATERIAL DEGREE TIP COLOR CODE NOZZLE SIZE 8F34X XR800VS ORANGE OC04 8F343X XR8005VS GREEN OC06 8F345X XR800VS YELLOW OC08 8F347X XR8003VS STAINLESS 80 BLUE OC 8F349X XR8004VS STEEL RED OC 8F34X XR8005VS BROWN OC6 8F343X XR8006VS GRAY OC6 8F345X XR8008VS WHITE - 8F35X XR00VS ORANGE OC04 8F353X XR005VS GREEN OC06 8F355X XR00VS STAINLESS 0 YELLOW OC08 8F357X XR003VS STEEL BLUE OC 8F359X XR004VS RED OC 8F35X XR005VS BROWN OC6 8F353X XR006VS GRAY OC6 8F355X XR008VS WHITE - 7. DETERMINE APPLICATION RATE A. Choose a desired ground speed within factory recommended range of 5 to 8 miles per hour (mph). B. By knowing tip size and desired ground speed, refer to English or Metric Application Rate Chart (shown on following pages to determine application rate (US gallons per acre or liters per hectare) based on different operation pressures. C. Example of how to obtain 5.0 U.S. gallons per acre application rate:. Determined tip size to be XR800.. Choose desired ground speed to be 6 miles per hour (mph). 3. Refer to English Application Rate Chart (shown on following page) to see that XR800 tip traveling at 6 mph will deliver 5.0 U.S. gallons per acre at 40 psi operation pressure. D. Spraying solutions other than water: All tabulations in this manual are based on spraying water which weighs 8.34 lbs. per U.S. gallon. Conversion factors must be used when spraying solutions which are heavier or lighter than water. To properly size nozzles for the solution to be sprayed multiply the desired GPM or GPA of solution by the water rate conversion factor, then use the new converted GPM or GPA rate to select the proper size nozzle. Example: Desired application rate is 0GPA of 8%N. Determine the correct nozzle size as follows: GPA (solution) x Conversion factor = GPA (from table) 0GPA (8%) x.3 =.6 GPA (water) The applicator should choose a nozzle size that will supply.6 GPA of water at the desired pressure. WEIGHT OF SPECIFIC CONVERSION WEIGHT OF SPECIFIC CONVERSION SOLUTION GRAVITY FACTORS SOLUTION GRAVITY FACTORS 7.0 LBS. PER GALLON LBS. PER GAL LBS. PER GALLON LBS. PER GAL LBS. PER GALLON LBS. PER GAL LBS. PER GALLON LBS. PER GAL LBS. PER GALLON.0.0.9

24 SECTION - SPRAYER OPERATION SUMMERS MANUFACTURING CO., INC. APPLICATION RATE CHART (ENGLISH) U.S. GALLONS PER ACRE - 0" SPACING TIP NO. Color Screen Orange 00 mesh Green Green 00 mesh Green Yellow 50 mesh Red Lilac 50 mesh Red Blue 50 mesh Red Red 50 mesh Red Brown 50 mesh Red Gray 50 mesh Red White 50 mesh Red PSI Capacity Nozzle in GPM oz/min SPEED - MPH / / / / / / *75.4 / *90.5 / / / / / / / *75. / *90.3 / / / / / / / *75.7 / *90.30 / / / / / / / *75.34 / *90.38 / / / / / / / *75.4 / *90.45 / / / / / / / *75.55 / *90.60 / / / / / / / *75.68 / *90.75 / / / / / / / / / / / / / * TURBO TEEJET TIPS ARE RECOMMENDED FOR PRESSURES GREATER THAN 60PSI. BASED ON 8.34 LB/GAL..0 8Z07 5/06

25 SECTION - SPRAYER OPERATION SUMMERS MANUFACTURING CO., INC. APPLICATION RATE CHART (METRIC) LITERS PER HECTARE m (0") SPACING TIP NO. Color Screen Orange 00 mesh Green Green 00 mesh Green Yellow 50 mesh Red Lilac 50 mesh Red Blue 50 mesh Red Red 50 mesh Red Brown 50 mesh Red Gray 50 mesh Red White 50 mesh Red KPA/00 (PSI) Capacity Nozzle in L/min * TURBO TEEJET TIPS ARE RECOMMENDED FOR PRESSURES GREATER THAN 4 KPA. BASED ON gm/cm 3. 8Z07 5/06. SPEED - KM/HR (MPH) 8 (5) 0 (6.) (7.5) 4 (8.7) 6 (9.9) 8 (.).0 (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) *5.0 (7.5) *6.0 (87.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0) (4.5) (.8) (9.0) (36.3) (43.5) (50.7) (58.0)

26 .

27 .3

28 SECTION - SPRAYER OPERATION.4 TESTING AND ADJUSTMENT OF SPRAYER SYSTEM. CAUTION REVIEW SECTION. SPRAYER OPERATION SAFETY BEFORE PROCEEDING. ADD WATER TO TANK Add approximately 300 gallons of water to tank(s) using one of the following methods. (For a dual tank system, test one system at a time). A. Set up Nurse Pump Bottom Fill..4

29 SECTION - SPRAYER OPERATION B. Set up Normal Spraying and fill tank(s) through top fillwell.. PRIME SPRAYER SYSTEM PUMP A. Set up Normal Spraying. B. Prime PTO driven pump:. Engage tractor PTO system and increase to normal field PTO speed to circulate water from the tank to the pump and back to the tank again through the agitators. Immediately verify agitator flow by looking through top fillwell.. Disengage tractor PTO system..5

30 SECTION - SPRAYER OPERATION C. Prime sprayer mounted gasoline driven pump:. Ensure there is liquid available at the pump.. Remove or loosen top vent fitting to expel air. 3. If water does not flow from fitting, add fluid until pump casting is full. 4. Verify engine has oil and fuel in it. 5. Turn ignition switch to run. 6. Pull starter rope. Choke engine as required. 7. After start up increase engine speed to circulate water from the tank to the pump and back to the tank through the agitators. 8. Slow engine to idle and turn ignition switch to off. D. Prime hydraulically driven pump:. Check that oil flow direction is correct by verifying that hose supplying pressure port of pump stiffens when engaging hydraulic lever in the float direction. The pump motor has a check valve on the tank port that should prevent the pump from running backwards. If the hoses are improperly connected to the tractor the tank hose will get hard and the pump should not run. If your pump runs both directions contact your Summer s dealer.. Engage tractor hydraulic system and increase to normal field rpm speed in order to circulate water from tank to pump and back to the tank again through the agitators. Immediately verify agitator flow by looking through top fillwell. 3. Disengage tractor hydraulic system by moving lever to float position. This allows pump to coast to a stop..6

31 SECTION - SPRAYER OPERATION 3. ADJUST HYDRAULICALLY DRIVEN PUMP SYSTEM The hydraulically driven pump system must be adjusted to limit maximum shut off pressure of 5 psi in order to stay within the 0 to 5 psi operating range of the plumbing system. Tractor hydraulic output will affect pump performance. For more complete information see the Hypro pump selection guide included in the publication. NOTE! WHEN HIGH SPRAY PRESSURES ARE DESIRED, OPERATOR MUST ADJUST AGITATORS TO INCREASE SPRAY PRESSURE. WITH ALL SPRAYER FUNCTIONS SHUT OFF AND PUMP RUNNING AT FULL CAPACITY PRESSURE MUST NEVER EXCEED 5 PSI. A. For CLOSED CENTER LOAD SENSING tractors adjust pump as follows:. Loosen jam nut for bypass screw located on top of hydraulic motor and turn screw completely in.. Secure jam nut. 3. Adjust flow control valve for tractor hydraulic system to allow minimum oil flow. SINGLE TANK DUAL TANK 4. Close manual valve D or Q (agitator control) plus make sure switches for all boom Electric Ball Valves are off. LEAVE VALVES A AND N (TANK SUCTION) OPEN! 5. Engage tractor hydraulic system and increase to normal field rpm speed. 6. Adjust flow control valve for tractor hydraulic system until pressure gauge reads psi over the expected spray pressure. DO NOT EXCEED 5 PSI. 7. Disengage tractor hydraulic system by moving lever to float position. This will allow pump to coast to a stop. 8. Set up Normal Spraying..7

32 SECTION - SPRAYER OPERATION B. For OPEN CENTER TRACTORS adjust pump by:. Loosen jam nut for bypass screw located on top of hydraulic motor and turn screw out / turns from fully closed setting.. Close manual valve D or Q (agitator control) and verify that switches for all boom Electric Ball Valves are on. LEAVE VALVES A AND N (TANK SUCTION) OPEN! 3. Engage tractor hydraulic system and increase to normal field rpm speed. 4. After oil has warmed open agitation valve D or Q to desired circulation. 5. Check pressure gauge and adjust bypass screw in for an increase in pressure and out to decrease pressure. DO NOT EXCEED 5 PSI! 6. Secure jam nut. 7. Disengage tractor hydraulic system. 8. Set up Normal Spraying. 4. START-UP RAVEN CONTROL A. Start-up Raven SCS-450 Control:. See Raven SCS-450 manual for complete information. B. Start-up Raven SCS-05 Control:. Place all BOOM ON/OFF switches to OFF.. Place MASTER ON/OFF switch to ON. 3. Engage tractor hydraulic system and increase to normal field rpm speed or engage tractor PTO system and increase to normal field PTO speed. 4. One by one cycle each BOOM ON/OFF switch on and off. Verify that each corresponding boom electric ball valve operates and that all nozzles have the desired spray pattern. When each outer boom is engaged test optional boom end nozzle for proper operation..8

33 SECTION - SPRAYER OPERATION 5. With all BOOM ON/OFF switches turned ON, hold the manual pressure adjust switch one way or the other in order to fully open the motorized regulator valve and obtain maximum operating pressure with full agitation. (The regulator valve is fully opened when the pressure stops increasing and starts to decrease). 6. Adjust manual valve D or Q (agitator control): a. Partially close manual valve D or Q to increase maximum operating pressure. b. Under normal spraying conditions, manual valve D or Q should be fully open. 7. If maximum operating pressure is still too low, follow pump adjusting procedure previously outlined. 8. With all BOOM ON/OFF switches turned ON, hold the manual pressure adjust switch the other way in order to fully close the motorized Regulator Valve and obtain minimum operating pressure. (The regulator valve is fully closed when the pressure stops decreasing and starts to increase). 9. With all spray BOOM ON/OFF switches turned ON, hold the manual pressure adjust switch to obtain required operating pressures necessary for desired application rate. 0. Disengage tractor hydraulic system or PTO system. HELPFUL HINTS FOR 450 CONTROL PROGRAMMING. Write down meter cal, valve cal, speed cal, and boom cal numbers in manual for quick, easy reference.. If any component fails and is replaced calibration will change and must be updated. 3. Disconnect console before jump starting, charging battery or welding on equipment. 4. Suspension type fertilizers and slurry mixtures will reduce the life of plastic parts in flow meter and control valve. Check rotor and hub frequently for worn parts. Excessive wear will affect accuracy. 5. Summers Manufacturing uses only standard close valves (C-sd). 6. SP is for wheel drive speed sensor. SP is for GPS, radar and interface cable speed sensors. 7. If console is flashing CAL it has not received enough calibration input to function. 8. To change some settings the console must be cleared. Data from Hint will be useful in this case. NOTE! SUMMERS MFG. CO. RECOMMENDS THAT THE OPTIONAL COMPUTERIZED CONTROL CONSOLE BE MOUNTED TO A SECURE SUPPORT INSIDE THE CAB OF THE SPRAY MACHINE. IMPORTANT! OPERATOR MUST PAY CAREFUL ATTEN- TION WHEN CROSS SPRAYING TO INSURE THAT SPRAY SOLUTION IS GOING TO ITS DESIRED LOCATION. 5. CROSS SPRAYING Front Tank Water to Main Tank Plumbing. (If you do not have a dual tank sprayer, proceed to Step 7). This allows the operator the ability to supply the boom normally used for the main tank with spray solution from the front tank. A. Set up for Front Tank Water to Main Tank Plumbing Cross Spraying..9

34 SECTION - SPRAYER OPERATION B. Engage tractor hydraulic system for the main tank pump and increase to normal field rpm speed or engage tractor PTO for the main tank pump and increase to normal PTO speed. C. Immediately verify that agitator flow and main tank pump vent are going to front tank. D. Disengage tractor hydraulic system or PTO system. E. Close all valves. 6. CROSS SPRAYING Main Tank Water to Front Tank Plumbing. This allows the operator the ability to supply the boom normally used for the front tank with spray solution from the main tank. A. Set up for Main Tank Water to Front Tank Plumbing Cross Spraying. B. Engage tractor hydraulic system for the front tank pump and increase to normal field rpm speed or engage tractor PTO for the front tank pump and increase to normal PTO speed. C. Immediately verify that agitator flow and front tank pump vent are going to main tank. D. Disengage tractor hydraulic system or PTO system. E. Close all valves. 7. TEST CHEMICAL FILL A. Add approximately 5 gallons of water to chemical fill tank. B. Engage tractor hydraulic system or PTO system. C. Set up Chemical Fill. When set up; close main supply valve halfway to draw chemical. THEN OPEN FULLY TO KEEP FROM RUNNING PUMP DRY..0

35 SECTION - SPRAYER OPERATION D. Disengage tractor hydraulic system or PTO system. E. Close all valves. 8. TEST OPTIONAL CLEAN LOAD SYSTEM LOADING. All Cleanload valves must be closed prior to starting. Inlet ball valve, knife valve, and hopper rinse ball valve.. Open lid to check for foreign objects which may hinder performance or contaminate the system. 3. Close and lock lid by turning cover clockwise. 4. Divert pump flow to cleanload inlet line (open valves C or P ). A pressure of 30 PSI minimum and 50 PSI maximum must be used. Highest pressures increase the education rate and available wand suction. 5. Open knife valve located on the bottom of hopper by pushing handle in. 6. Unlock and open lid slowly by turning cover counterclockwise. LOADING LIQUID OR POWDERED CHEMICAL INTO HOPPER 7. Pour required amount of chemical into hopper. Avoid splashing liquids or powdered chemicals outside of hopper. 8. Rinse empty chemical containers if applicable. Place container opening over container rinse valve and press down. This will activate the rinse valve and rinse container. 9. Rinse cleanload hopper. Close and lock lid by turning cover clockwise. Release the safety locking band on the hopper rinse ball valve and turn on for 0 seconds. Close ball valve and return locking band to locked position. 0. Open lid and inspect for chemical residue. Repeat step 0 as necessary.. Close knife valve by pulling red handle out towards you. Turn inlet valve off. SHUTDOWN. Close knife valve first by pulling red handle out towards you.. Insure that the remaining valves are closed. 3. Verify chemical residue has been cleaned up..

36 SECTION - SPRAYER OPERATION 4. Close hopper lid and lock by turning clockwise. 5. Divert pump discharge flow back to normal operation by closing valves C or P. 9. TEST OPTIONAL RINSE TANK A. Add approximately 40 gallons of water to RINSE TANK using Bottom Fill or through top fillwell. B. Set up and test all functions of RINSE TANK individually.. Position valves as shown for each operation.. Engage tractor hydraulic system or PTO system. 3. NEVER RUN PUMP DRY! Check that rinse operation is running correctly. 4. Disengage sprayer pump. 5. Reposition valves for next spray operation. 0. PERFORM SPRAYER SYSTEM DAILY MAINTENANCE A. Check all sprayer system components for leaks. B. Clean sprayer system strainer. C. Check water level in safety water tank plus check that rubber gloves and goggles are present. D. Check tanks for movement and tighten hold down components as required. E. Check nozzle patterns. If a nozzle pattern is distorted:. Remove nozzle tip.. Clean with toothbrush, wooden or plastic probe. Never use a metal object since damage will occur. 3. Blow out nozzle tip with compressed air no greater than 40 psi. Never use your mouth to blow out a nozzle tip. 4. Replace nozzle tip if necessary. 5. Install nozzle tip back onto sprayer. F. During periods of use in freezing temperatures:. Flush entire sprayer system with recreational vehicle (RV) anti-freeze. RV anti-freeze is nontoxic and safe for the environment. It must be used in 00 % concentrations, but it is more economical than permanent anti-freeze to purchase and will not corrode plastic sprayer com-.

37 SECTION - SPRAYER OPERATION ponents.. Spray solution through nozzles. 3. Allow dripless nozzles to drain by loosening each diaphragm check valve nut. IMPORTANT! ANALOG GAUGES USED IN RAVEN CONSOLES MAY RETAIN SMALL AMOUNTS OF FLUID IN THEM AND SHOULD NOT BE SUBJECT TO EXTENDED PERIODS OF FREEZING TEMPERATURES. STORE GAUGE IN- DOORS AFTER SPRAYER HAS BEEN USED AND BEFORE IT IS EXPOSED TO FREEZING TEMPERATURES. G. When changing chemicals follow chemical manufacturers WARNINGS, instructions, and procedures concerning sprayer system cleaning. IMPORTANT! CERTAIN CHEMICALS AND FERTILIZERS MAY CAUSE PAINT DETERIORATION. TO REDUCE CHANCE OF SPRAYER PAINT DETERIORATION, CLEAN SURFACES CONTACTED BY CHEMICAL IMMEDIATELY AFTER USE..5 TRANSPORTING AND OPERATION OF SPRAYER FROM FIELD TO FIELD. UNFOLD BOOM FROM TRANSPORT TO FIELD POSITION. CAUTION REVIEW SECTION. SPRAYER OPERA- TION SAFETY BEFORE PROCEEDING IMPORTANT! SPRAYER SHOULD BE PARKED ON A LEVEL SURFACE FOR FOLDING AND UNFOLDING OPERATIONS. OPERATOR MUST BE SURE AREA IS CLEAR OF POWER LINES AND OTHER OBSTRUCTIONS. A. Activate vertical height switch on control box and select tractor hydraulics to extend cylinders and lift booms up out of transport rests. B. Deactivate vertical height switch. C. Activate part boom fold switch and select tractor hydraulics to unfold part booms. D. Deactivate part boom fold switch. E. Activate right and left tip lift switches and select tractor hydraulics to lower tip lifts. F. Deactivate tip lift switches. G. Activate part boom fold switch and select tractor hydraulics to unfold part booms H. Deactivate part boom fold switch. NOTE INNER BOOMS MUST BE COMPLETELY UN- FOLDED BEFORE UNFOLDING OUTER BOOMS. ONCE OUTER BOOMS ARE MOVED FROM TRANSPORT POSITION A SAFETY SWITCH IS OPENED PREVENTING FURTHER INNER BOOM MOVEMENT..3

38 SECTION - SPRAYER OPERATION IMPORTANT! OUTER BOOM SWITCH MUST BE DEACTIVATED FOR BOOM TO BREAK AWAY WHEN CONTACTING AN OBSTRUCTION. FAILURE TO DEACTIVATE SWITCH WILL CAUSE PHYSICAL DAMAGE AND POSSIBLY BODILY INJURY. BOOM DAMAGE CAUSED BY FAILURE TO MAKE BREAK AWAY OPERATIVE WILL NOT BE WARRANTED. I. Activate part 3 boom fold switch (if equipped with 3 section boom) and select tractor hydraulics to unfold part 3 booms. J. Deactivate part 3 boom switch. K. Activate vertical height switch and select tractor hydraulics to adjust height of spray boom. L. Deactivate vertical height switch.. LEARN THE CORNER TURNING LIMIT Know how sharp a corner can be made without interference between tractor and sprayer when sprayer is folded and unfolded. Every tractor connection is different so know the limits..6 SPRAYER SYSTEM FIELD OPERATION AND ADJUSTMENT. SET UP NORMAL SPRAYING IMPORTANT!. NEVER RUN PUMP DRY. THE MECHANICAL SEAL BETWEEN THE PUMP AND POWER SOURCE DEPENDS UPON LIQUID FOR LUBRICATION. SEAL DAMAGE FROM RUNNING PUMP DRY IS NOT COVERED BY WARRANTY.. SINCE BOTH THE HYDRAULIC AND PTO PUMPS ARE CENTRIFUGAL PUMPS, BOTH THE BOOMS, AS WELL AS THE MANUAL VALVES D AND Q CAN BE SHUT OFF WITHOUT DAMAGING THE PUMP PROVIDED THE PUMP IS NEVER RUN DRY..4

39 SECTION - SPRAYER OPERATION. START UP PUMP Start pump engine, engage pump, and increase pump speed to obtain proper pump performance. 3. START UP RAVEN CONTROL 4. ADJUST SPRAY HEIGHT DEGREE TIP SPRAY HEIGHT TIP TO TARGET 80 7 TO TO 8.7 CALIBRATION OF SPRAYER SYSTEM. CHOOSE AND MEASURE OFF one of the following three fixed distances: (LONGER DISTANCES PRODUCE MORE ACCURATE RESULTS). A. /4 mile = 30 feet B. / mile = 640 feet C. mile = 580 feet. COMPLETELY FILL the sprayer tank or tanks. 3. SHUT OFF OPTIONAL END NOZZLES 4. SPRAY THE CHOSEN DISTANCE using: A. Desired ground speed within factory recommended range of 5 to 8 miles per hour (mph). B. Desired operating pressure. 5. MEASURE the gallons of water required to completely refill the sprayer tank. 6. CALCULATE APPLICATION RATE using correct formula for measured distance chosen: A. For /4 mile: U.S. Gallons per acre = Measured Gallons of Water x 33 Actual Spraying Width (Feet) B. For / mile: U.S. Gallons per Acre = Measured Gallons of Water x 6.5 Actual Spraying Width (Feet).5

40 SECTION - SPRAYER OPERATION C. For mile: 7. EXAMPLE U.S. Gallons per Acre = Measured Gallons of Water x 8.5 Actual Spraying Width (Feet) 36 Gallons of Water x 6.5 = 5.0 U.S. Gallons per Acre 0 Feet 8. START UP RAVEN CONTROL to lower main tank water level enough to make room for chemical. 9. ADD CHEMICAL TO MAIN TANK USING CHEMICALS? PROTECT YOURSELF! HIGH HAZARD. REFER TO SIGNAL WORD AND REQUIRED REQUIRES: PERSONAL PROTECTIVE EQUIPMENT WHEN *goggles USING CHEMICALS. * respirator *avoid fumes. ALWAYS READ AND FOLLOW CHEMICAL *rubber gloves and MANUFACTURERS WARNINGS, skin protection INSTRUCTIONS AND PROCEDURES BEFORE USING. MODERATE HAZARD REQUIRES: 3. HANDLE CHEMICALS WITH EXTREME CARE. *goggles *avoid fumes 4. IN CASE OF POISONING, GET IMMEDIATE *rubber gloves and skin protection LOW HAZARD 5. BE SAFE! REQUIRES: *avoid fumes *rubber gloves and skin protection MEDICAL ATTENTION. A CONTAINER LABEL MAY BE BENEFICIAL FOR QUICK TREATMENT..6

41 SECTION - SPRAYER OPERATION ADD CHEMICAL TO MAIN TANK by using one of the following three methods: a. Add chemical through top fillwell. b. Set up Chemical Fill. c. Add chemical with Chemical Load and Rinse Wand..7

42 0. START UP NORMAL SPRAYING. SECTION - SPRAYER OPERATION CAUTION! OPERATOR USE OF AUTOMATED STEERING SYSTEMS CAN CAUSE RAPID DIREC- TION OF TRAVEL CORRECTIONS. TRACKED AND ARTICULATED TRACTORS MAGNIFY OR WORSEN THESE DIRECTION CHANGES. WHEN SPRAYING THESE RAPID DIRECTION CHANGES WILL CAUSE THE BOOMS TO WHIP VIOLENTLY AND CAN CAUSE SEVERE STRUCTURE DAMAGE TO SPRAYER OR SPRAY VEHICLE. OPERATOR MUST BE SURE THAT SPRAY VEHICLE IS CLOSE TO LINE OF GUID- ANCE BEFORE SWITCHING TO AUTO STEER.. ADJUST MANUAL VALVE D OR Q (AGITATOR CONTROL) IMPORTANT!. BECAUSE OF THE WIDE RANGE OF SPRAYING CONDITIONS, THE OPERATOR IS RE- SPONSIBLE FOR ACCOMPLISHING BOTH PROPER AGITATION AND DESIRED APPLI- CATION RATE. FOLLOW CHEMICAL CONTAINER LABELING.. UNDER NORMAL SPRAYING CONDITIONS, MANUAL VALVE D OR Q SHOULD BE FULLY OPEN. 3. BE SURE JET AGITATORS ARE NOT PLUGGED. 4. MIX CHEMICAL THOROUGHLY BEFORE SPRAYING..8 UNHOOKING SPRAYER FROM TRACTOR. SPLIT ELECTRICAL AND MECHANICAL PRESSURE SENSING CABLES.. REMOVE PTO PUMP from output shaft of tractor. 3. DISCONNECT HYDRAULIC LINES. 4. ROTATE JACK into standing position and extend jack. 5. DISCONNECT HITCH AND SAFETY CHAIN..8

43 SECTION 3 - MAINTENANCE 3. MAINTENANCE SAFETY. STOP engine, place all controls in neutral, set parking brake, remove ignition key and wait for all moving parts to stop before servicing, adjusting, maintaining or unplugging.. KEEP CHILDREN AWAY from chemicals and sprayer equipment. 3. USE EXTREME CARE when cleaning, filling or making adjustments. CAUTION REVIEW SECTION 3. SPRAYER OPERATION SAFETY BEFORE PROCEEDING 4. USING CHEMICALS? PROTECT YOURSELF! HIGH HAZARD. REFER TO SIGNAL WORD AND REQUIRED REQUIRES: PERSONAL PROTECTIVE EQUIPMENT WHEN *goggles USING CHEMICALS. * respirator *avoid fumes. ALWAYS READ AND FOLLOW CHEMICAL *rubber gloves and MANUFACTURERS WARNINGS, skin protection INSTRUCTIONS AND PROCEDURES BEFORE USING. MODERATE HAZARD REQUIRES: 3. HANDLE CHEMICALS WITH EXTREME CARE. *goggles *avoid fumes 4. IN CASE OF POISONING, GET IMMEDIATE *rubber gloves and skin protection MEDICAL ATTENTION. A CONTAINER LABEL MAY BE BENEFICIAL FOR QUICK TREATMENT. LOW HAZARD 5. BE SAFE! REQUIRES: *avoid fumes *rubber gloves and IMPORTANT! skin protection CERTAIN CHEMICALS AND FERTILIZERS MAY CAUSE PAINT DETERIORATION. TO REDUCE CHANCE OF SPRAYER PAINT DETERIORATION, CLEAN SURFACES CONTACTED BY CHEMICAL 5. BE CAREFUL when working around high pressure hydraulic system. 6. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing or disconnecting from tractor. 7. KEEP SAFETY DECALS CLEAN. 8. REPLACE missing or unreadable decals. New decals are available from your SUMMERS dealer by stating correct part number (PN) located on the decal. See Section.5 DECAL LOCATIONS. 9. VERIFY all safety devices and shields are in place before using machine. 0. KEEP hands, feet, hair and clothing away from moving parts. 3.

44 SECTION 3 - MAINTENANCE 3. DAILY MAINTENANCE Your Summers Supersprayer will give you lasting trouble free service if it is properly maintained.. Grease all points shown (See Figure ).. Check all hydraulic components for leaks. 3. Check all wheel bolts. 4. Check all sprayer system components for leaks. 5. Clean sprayer system strainer. 6. Check water level in optional clean water tank plus check that rubber gloves and goggles are present. 7. Check tanks for movement and tighten hold down components as required. 8. Check nozzle patterns. If a nozzle pattern is distorted: a. Remove nozzle tip. b. Clean with toothbrush, wooden or plastic probe. Never use a metal object since tip damage will occur. c. Blow out nozzle tip with compressed air no greater than 40 psi. NEVER USE YOUR MOUTH TO BLOW OUT A NOZZLE TIP. Figure d. Replace nozzle tip if necessary. e. Install nozzle tip back onto sprayer. 9. During periods of use in freezing temperatures: a. Flush entire sprayer system with recreational vehicle (RV) antifreeze. RV anti-freeze is non-toxic and safe for the environment. It must be used in 00 percent concentrations, but it is more economical than permanent type anti-freeze to purchase and will not corrode plastic spray components. b. Spray solution through nozzles. c. Allow dripless nozzles to drain by loosening each diaphragm check valve nut. 0. When changing chemicals, follow chemical manufacturers WARNINGS, instructions and procedures concerning sprayer system cleaning. 3.3 OFF SEASON STORAGE. Clean sprayer system tank(s) and optional mix and fill tank: a. Flush each tank with clean water, and then drain. b. Flush each tank using a strong detergent or ammonia, then drain. c. Rinse each tank with clean water, and then drain. 3.

45 . Clean entire sprayer system: SECTION 3 - MAINTENANCE a. Partially fill each tank with clean water and add one part household ammonia for every 00 parts water. b. Engage pump and circulate solution through entire spray system. Spray solution through nozzles, and then drain. c. Partially fill each tank with clean water only. d. Engage pump and circulate rinse water through entire spray system. Spray rinse water through nozzles. 3. Winterize entire sprayer system: a. Flush entire sprayer system with recreational vehicle (RV) anti-freeze. RV anti-freeze is non-toxic and safe for the environment. It must be used in 00 % concentrations, but it is more economical than permanent type anti-freeze to purchase and will not corrode plastic spray components. b. Spray solution through nozzles. c. Allow dripless nozzles to drain by loosening each diaphragm check valve nut. IMPORTANT! ANALOG GAUGES USED IN RAVEN CONSOLES MAY RETAIN SMALL AMOUNTS OF FLUID IN THEM AND SHOULD NOT BE SUBJECT TO EXTENDED PERIODS OF FREEZING TEMPERATURES. STORE GAUGE IN- DOORS AFTER SPRAYER HAS BEEN USED AND BEFORE IT IS EXPOSED TO FREEZING TEMPERATURES PRESEASON ANNUAL MAINTENANCE. READ AND UNDERSTAND Operator s Manual before using machine.. Grease wheel bearings and inspect bearing looseness. 3. Check tank(s) for cracks. 4. Inspect sprayer components. 5. Inspect hydraulic components. 6. Tighten each diaphragm check valve nut on dripless nozzles. 7. Refer to SECTION SPRAYER OPERATION for set-up and start-up procedures. 8. Flush winterizing anti-freeze solution from entire sprayer system with clean water. Spray rinse water through nozzles. Automotive anti-freeze is a hazardous material and must be disposed of properly. 3.3

46 SECTION 3 - MAINTENANCE NOTES 3.4

47 SECTION 4 - TROUBLESHOOTING 4.. SPRAYER SYSTEM TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION. Pump does not develop pressure (Hydraulic motor should hum if pump is operating normally). *If hydraulic system overheats: a. Check tractor hydraulic system oils level. b. Check for hydraulic system leaks. c. Check for dented or restricted oil lines. d. Change oil and filters if dirty per tractor manufacturer recommendations. e. Check that hydraulic system reservoir, lines and cooler are clean and functioning. f. Check condition of tractor hydraulic pump. g. See Hydraulic Pump manual for more information. A. Incorrect direction of oil flow. Reverse hydraulic hoses or move Hydraulic lever in opposite direction. B. Insufficient water to prime pump. Fill tank to a point above pump level. C. Insufficient tractor RPM. D. Bypass screw (located on side of hydraulic motor) improperly adjusted. Tractor engine must be running at normal Field RPM speed. See Hypro Pump Selection guide for more information. Refer to section.4-3. E. Frozen impeller. Split water pump and free impeller. F. Incorrect pump. G. Unknown. See Hypro Pump Selection guide for more information. See Hydraulic or PTO Pump manual for more information.. Raven SCS-05 Control does not work properly. Improper connections or defective components. See Raven Sprayer Control Systems manual for more information. 3. Raven SCS-450 Control does not work properly. 4. Regulator valve does not regulate pressure. Improper connections or defective components. A. Master switch must be ON and one or more Boom switches must be ON. B. Regulator valve is in a neutral position (05 only) C. Improper voltage or poor electrical connection. See Raven SCS-450 manual for more information. Turn master switch ON and turn one or more boom switches ON. Hold pressure adjust switch until valve moves into adjusting range. Listen to motor while switch is activated. If nothing is heard, check voltage and connections. If motor runs but pressure does not change, replace regulator valve. D. Rate or Rate is selected on 450. Turn Rate Switch to manual. 5. Electric ball valves do not work properly. A. Improper voltage or poor electrical connection. B. Internal breaker tripped. C. Power and ground wires on console are reversed. Check voltage and connections. Refer to section 5 Electrical diagrams. Disconnect power for 0 seconds to reset. Disconnect console feed wires and attach red to positive and white to ground. 6. Not getting application rate for a given pressure setting. A. Plugged line strainer. Clean line strainer. B. Plugged nozzle screens. Clean nozzle screens. 4.

48 4.. MECHANICAL TROUBLESHOOTING SECTION 4 - TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION. Boom leads or lags too much in relation to cart. A. Spring clevis adjustment is incorrect. B. Eye bolts are out of adjustment. Adjust Spring clevis so when spring is compressed the coils never touch. See Pages.4-6. Boom lead is properly adjusted when spring clevis is compressed and there is zero boom lead. See Pages.4-6. A. Stop bolts out of adjustment. Adjust stop bolts and lock nuts.. Inner and outer boom sections are not lined up with each other. B. Rubber bumper loose or missing. Replace rubber bumper. C. Stop bolts broken or missing. Repair broken or missing adjustment bolts. 3. Outer booms slam back to field position after encountering an obstruction. 4. Outer booms do not self-return to field position after encountering an obstruction. A. Restrictor check valves missing or installed improperly. One way restrictor check valves are installed in the outer boom fold cylinder. The slot should be up in the blind end and slot down in rod end. B. Rubber bumpers missing. Replace rubber bumpers. C. Cylinder mounting springs out of adjustment. A. Restrictor check valves missing or installed improperly. B. Accumulator not functioning properly. Adjust cylinder-mounting eyebolt so springs are preloaded and adjustment is centered. Check so boom unfolds and folds completely and look for worn parts. One way restrictor check valves are installed in the outer boom fold cylinder. The slot should be up in the blind end and slot down in rod end. Check accumulator for gas charge. Replace if charge has escaped. C. Wind or travel speed excessive. Slow travel speed down. 5. Booms bounce excessively when spraying. A. Terrain too rough or uneven. B. Nitrogen charged accumulator not functioning properly. Slow travel speed to factory recommended 5-8 MPH. If accumulator is over charged, Nitrogen can be released to take out the bounce. C. Cable out of adjustment. Adjust cable to reduce boom bounce. 6. Boom suspension does not work. A. Operator is using cylinder stops to control boom height. B. Suspension accumulator has an inaccurate nitrogen charge. Remove vertical height cylinder stops. Add or release nitrogen in accumulator or replace with known good unit. C. Hydraulic system leak. Repair hydraulic leak. D. Tire pressure incorrect. Adjust tire pressure to specifications. A. Latch clips are too loose. Adjust latch clips. 7. Boom breaks away too easy. B. Outer boom cable is too tight. Loosen cable. C. Wind or travel speed excessive. Slow travel speed down. 4.

49 4.. MECHANICAL TROUBLESHOOTING SECTION 4 - TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION 8. Boom doesn t break away. 9. Spray height is not correct. A. Outer boom fold switch not turned off. B. Blocking valve on outer boom fold cylinder not working. C. Accumulator malfunction. A. Hydraulic cylinder adjustment incorrect. B. Booms not level. Outer boom fold switch must be turned off for the break away to function. Verify that blocking valve is normally open. Check for nitrogen pressure in accumulator. Replace or recharge. Activate vertical height circuit and raise or lower booms. Adjust inner boom top clevis to level booms. Refer to section.5. A. Sprayer is on uneven terrain. Move sprayer to level location. 0. Booms do not go into transport rests. B. Inner boom spring cushion is out of adjustment. C. Inner boom spring cushion assembly is out of adjustment. Adjust inner boom fold spring cushion. Refer to section.4 and see note. Adjust inner boom fold spring cushion assembly. Refer to section.6. D. Inner boom eyebolt bent or broken. Adjust or replace inner boom eyebolt. A. Travel speed too fast for terrain. Loosen bolts.. Booms do not self-level. B. Swing arms are not greased. Lubricate swing arms and parallel links. C. Wear plates are rubbing guides hard. Check for worn pivot bolts or adjust boom wear plate guides. A. Terrain too rough or uneven. Slow down to allow sprayer time to react. B. Terrain too rough for suspended boom. Raise booms. C. Sprayer and tractor unstable. Spread out wheel c-c s to gain stability. D. Booms do not self level. See problem above.. Booms contact ground often. E. Boom suspension does not work properly. Check and adjust accumulator pressure. Correct parallel link binding. Grease parallel link pivots. F. Improper tire pressure. Adjust tire pressures to specifications. G. Booms are not level in spray position. Level both booms and recheck. 4.3

50 SECTION 4 - TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION A. Switch box does not have volts. Wire switch box on volts power. 3. Inner boom does not move when hydraulic lever operated. B. Safety switch on right boom not being tripped by outer boom. C. Cartridge I and/or F not functioning properly. D. Debris in cartridges and/or orifice. Verify that outer boom is folded or adjust safety switch. Clean I and F cartridges and coils. Clean cartridges and orifices under cartridges. A. Switch box does not have volts. Wire switch box to volts power. 4. Outer booms do not unfold. 5. Booms drift forward during field operation. 6. Sprayer does not quit spraying when master boom switch is turned off. 7. Sprayer remote does not function. B. Wire connections loose. C. Debris in cartridges and/or orifice. D. Cartridge A and/or D not functioning properly. A. Pressure relief cartridge C not functioning properly. B. Add pilot operated check valve to system. A. Sprayer remote not turned on. B. Diaphragm caps on nozzle bodies not shutting off. A. Remote not wired correctly. B. Improper Raven 450 console wire harness connection. Check wire connections from hydraulic block to Part boom, cyl. needs volts. Clean cartridges and orifices under cartridges. Clean A and D cartridges and coils. Check for debris under pressure relief cartridge. Replace pressure relief cartridge. Install 8L430 or 8L43 pilot check valve kit per instructions. Remote control must be left on while console is operating. Diaphragm gaskets need cleaning or diaphragm spring not strong enough. Mate two blue wires on remote to orange & orange/white wires on Raven wire harness. 450 console harness must have power lead connection closest to console. 8. Spray pressure falls off when boom valves turned on. A. Plugged main line strainer (screen). Flush screen with cleaner and blow off with compressed air. B. Supply line to pump is restricted. Check for debris in main suction line. C. Speed reading is not correct. Check speed cal. Number or recalibrate speed. A. Hoses not plugged in. Plug in hyd. hoses. 9. Norac boom leveling system does not function or is slow. B. Norac filter plugged. Replace filter. C. Sensor not working. Clean sensor filter. D. Sensor not ticking. If harness tests okay replace or calibrate sensor. E. Improper oil flow. Adjust oil flow from 5-7 gpm. 4.4

51 SECTION 5 - ELECTRICAL THIS SECTION CONTAINS ELECTRICAL DIAGRAMS THAT MAY BE HELPFUL IN THE EVENT OF A SPRAYER MALFUNCTION. THIS SECTION IS PROVIDED FOR YOUR INFORMATION AND TO AID SERVICE WHEN DISCUSSING SERVICE PROBLEMS OVER THE PHONE. NOTE! OPERATORS INSTALLING FOAM MARKERS ON ULTIMATE SPRAYERS BE ADVISED THAT LIGHTED SWITCHES INSTALLED IN ELECTRICAL SWITCH BOX WILL CARRY 5 AMPS MAXIMUM. MARKERS EXCEEDING SWITCH AND WIRING CAPACITY WILL NOT PERFORM EFFICIENTLY ON AN INADEQUATE CURRENT SUPPLY. UNITS WITH A LARGE CURRENT NEED SHOULD USE WIRING HARNESS SUPPLIED WITH THE MARKER. A SIMPLE RELAY CIRCUIT COULD ALSO BE USED TO SUPPLY CURRENT THROUGH A 6 GAUGE WIRE AND BE OPERATED WITH THE SUMMERS ELECTRICAL SWITCH BOX. 5.

52 SECTION 5 - ELECTRICAL 5.

53 SECTION 5 - ELECTRICAL VERTICAL TIPLIFT HEIGHT END NOZZLE BOOM FOLD 5.3

54 SECTION 5 - ELECTRICAL 5.4

55 SECTION 5 - ELECTRICAL 5.5

56 SECTION 5 - ELECTRICAL 5.6

57 SECTION 5 - ELECTRICAL 5.7

58 SECTION 5 - ELECTRICAL 5.8

59 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.. ELECTRONIC PRESSURE GAUGE PACKAGE To install electronic pressure transducer on a 450 plumbing system. Locate the ¼ fittings on the end of the boom valve manifold or where you want to take a pressure reading. The pressure transducer is equipped with a few extra fittings to allow for an end user preferences. The end user may want to have both an analog and a digital pressure reading or one or the other may be sufficient. Install the desired fittings and pressure transducer. Attach and route transducer cables to sprayer console. Be careful to fasten transducer cable to sprayer so it is protected from harm and abrasion. To calibrate transducer. With 0 PSI (KPA) in the boom lines, enter 0 for pressure calibration (cal pressure) in 450 console. Cal pressure is under the Data Menu key. When system is operating, system PSI (KPA) will be displayed when the speed key or the vol/min key is depressed and illuminated. Electronic pressure gauge part number is 8S EQUAL BOOM SPLIT OPTION. Count all nozzles.. Divide by number of boom control valves. 3. If it is some odd number decide on how you want it split up. Keep in mind the center boom already has six nozzles on it and the end result will have to be an even number, unless it is desired to split in the middle. 4. With six nozzles fixed on rear center boom decide how many are required on each side boom to come up with a per nozzle quantity. 5. Cut the aluminum boom after the last nozzle of the center boom width on each side. You must leave at least -/ after the last nozzle port for threads and clearance. The finished result will be removing 0-5 from each wet boom. 6. Thread the cut ends of the wet boom tube with NPT. Normal thread length is. 7. Install coupler, hose barb ends and pipe cap in appropriate locations. 8. Remove existing fitting from center boom control valve. You will use this fitting over again so do not destroy it. Install nipple and cross to boom control for center section. 6.

60 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 9. Install hose barb fittings into cross. You will need to end up with two ports facing the front of the sprayer and one port facing the rear boom. 0. Run 3/4 line from cross to each end of 3 boom sections on center section.. Run line to out board boom sections from remaining boom control valves.. Add water to sprayer tank and test operation. 3. Check for and repair all leaks. Example: For a spacing. To find out how many nozzles convert 66 8 into inches and divide by 0. (66 x ) + 8 = 800, 800/0 = 40 nozzles. Divide the number of nozzles by the number of booms you want. 40 nozzles /3 booms = 3.33 nozzles per boom. In this example there will be one boom that is unequal to the other two. We would set up 3 on right boom, 4 on the center boom, and 3 on the left boom. With six nozzles on the center boom we would cut the left and right booms after the fourth nozzle on each side = CONTROL GRIP To install a hydraulic control grip on Summers sprayer. Locate port on hydraulic switch box. Attach control grip to switch box at control grip port. Switch box will not function properly with control grip port empty. Control grip or protective cover must be installed for proper operation of all switch functions. Mount control grip to hydraulic lever that will control desired sprayer functions. Tie up or retain any extra cabling so it does not become a safety hazard To use control grip functions. With tractor engine operating move hydraulic lever to desired position while operating one of the three switches. The respective function on sprayer switch box will light up indicating circuit is activated and the cylinders should function. Moving the control grip in opposite direction with the same switch activated will reverse the cylinder direction. With the control grip installed in the switch box the three switches that are replaced by the control grip will not function. This is normal and they will again function when the control grip is removed and port plug installed. Operator must remember this when folding the sprayer. 6.

61 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.4. RINSE NOZZLE WITHOUT RINSE TANK Assembly tips for installing rinse ball on main tank without a rinse tank Summers Ultimate Sprayer.. Drill one -/ diameter hole in main tank directly behind the second tank hoop in the top center of the tank. Drill another -/ diameter hole directly behind the front hoop in a unobstructed location near the top of the tank.. Locate a capped off port on pressure side of plumbing and install the reducer coupling, elbow, ball valve and hose barb. Tighten all flange clamps after the new plumbing components are routed to clear obstacles. 3. Install hose connecting the ball valve with rinse ball. RINSE HEAD OPERATION Refer to sprayer plumbing decal for valve locations To flush sprayer tank. Rotate tank selector valve A to closed position.. If sprayer has bottom fill, verify that bottom fill to main tank is closed and open to sprayer pump. 3. Close valve D to agitators. 4. Start sprayer pump and open the new valve to tank rinse nozzle. To remove rinse water from Main tank. Remove bottom fill line.. Open valve A and valve D. 3. Start and run pump and discharge rinse water through spray booms. 4. After agitator line has been flushed the valve can be closed to allow more complete use of water in main tank RINSE TANK OPTION W/WAND Assembly tips for installing rinse tank on Summers Ultimate Sprayer.. Drill one -/ diameter hole in main tank directly behind the second tank hoop in the top center of the tank. Drill another -/ diameter hole directly behind the front hoop in a unobstructed location near the top of the tank.. Install 3-way ball valve on end of suction plumbing by mating the flanges. The two outlet ports will go to the rinse tank and the main sprayer tank. 3. Sight tube and bracket with optional gauge will need to be removed prior to saddle and tank installation. Sight tube will be relocated to the front of the rinse tank saddle support. 4. Flanged hose barb elbow will get installed in the pressure side of the plumbing and will allow hook up of hose that will supply a three way ball valve that is to be mounted on the saddle support. This valve will control flow to the rinse nozzle or optional wash wand. 6.3

62 SECTION 6 - OPTION NOTES AND INSTRUCTIONS To fill tank using bottom fill RINSE SYSTEM OPERATION. Rotate tank valve A to middle (closed) position.. If sprayer has combination bottom fill, verify that bottom fill to main tank is closed. 3. Open -/4 ball valve to rinse tank. 4. When rinse rank is full, close fill valve, and adjust tank valve A to desired position. To flush sprayer tank. Adjust tank valve A right to receive clean water from rinse tank.. Rotate pump rinse valve B clockwise to direct water to sprayer tank rinse head. 3. Start and run pump for desired results. To remove rinse water from main tank. Adjust tank valve A counter clockwise to receive dilute chemical solution from sprayer tank.. Rotate rinse valve B counter clockwise to direct chemical solution to sprayer booms. Booms must be turned on and pump must be running. 3. Repeat as necessary to clean tank. If sprayer is equipped with bottom fill into the tank, the tank may be drained through the bottom fill into a catch pan. To flush booms only. Rotate tank valve A clockwise to receive clean water from rinse tank.. Rotate rinse valve B clockwise to direct rinse water to spray booms. 3. Start sprayer pump and adjust RPM to achieve adequate pressure for washing. If there are further questions call Summers service department at ext VALVES E & R CROSS OVER PLUMBING OPTION To install cross over plumbing on a summers pull-type sprayer. Locate the front most capped off port on the discharge (plumbing attached to pump that feeds the booms) plumbing. Install small elbow, clamp, gasket, and hose. Locate a capped off port on suction line farthest from sprayer hitch. Attach ball valve and larger elbow using clamps and gaskets supplied. Attach the other end of hose installed in first step to hose barb elbow just installed. Fittings may be loosened and rotated to allow best path of flow from discharge to suction and to eliminate and hose problems. Tighten all clamps 6.4

63 SECTION 6 - OPTION NOTES AND INSTRUCTIONS To bottom fill via the cross over plumbing. Close the suction line ball valve that supplies water to pump from spray tank. Open the bottom fill line ball valve so pump can suck from bottom fill line. Open cross over plumbing ball valve to allow bottom fill water passage to sprayer tank. Start sprayer pump to force water into spray tank END NOZZLE OPTION To install a manual end nozzle on Summers sprayer. Verify the end nozzle tip is installed and sized to match the boom spray tips (a selection chart is in the operator s manual for your sprayer. Selected desired side of sprayer to mount end nozzle. Remove wet boom end cap if installed. Brush some pipe sealing compound on pipe threads and install end nozzle. With nozzle installed adjust the spray direction to desired location. Start sprayer and check for leaks, tip operation and spray pattern direction. To install an electric end nozzle on Summers sprayer. Verify the end nozzle tip is installed and sized to match the boom spray tips (there is a selection chart in your sprayer operator s manual). Selected desired side of sprayer to mount end nozzle. Remove wet boom end cap if installed. Brush some pipe sealing compound on pipe threads and install end nozzle. Attach wire harness to solenoid and route wires towards operator platform. Tie or tape harness cable securely to sprayer and out of harms way. Be careful around pinch points and moving parts. Attach harness to 450 control wiring if available. If all 450 harness switches are used then the end nozzle can be run through any type of switch box that will provide a power supply and ground if one has not been provided to you. With nozzle installed adjust the spray direction to desired location. Start sprayer, activate switch, check for leaks, tip operation and spray pattern direction. End nozzle operation notes. When end nozzle is operating the proper pattern will cover 6 feet and this must be considered additional width when programming the Raven 450 sprayer control. If boom width is not entered correctly application rate may not be accurate. Electric end nozzle harness should be plugged in to any available boom switch harness on the 450 control harness. When the electric end nozzle is installed on the 450 console that boom switch will automatically adjust spray pressure to meet the desired application rate for the width of sprayer booms that are spraying. 6.5

64 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.8. SINGLE SEPARATE TIPLIFT CIRCUIT. Select tip lift cylinder to isolate left or right.. Port J feeds left tip lift. 3. Port E feeds right tip lift. 4. Remove existing hose and fitting from selected port. 5. Install small 9/6 ORB tee fitting into port. 6. Install original hose to tee. 7. Remaining exposed tee port will be directed towards tractor remote and will be connected by supplied hose/ hoses, union as required, restrictor, and tractor coupler. Colored ties will mark each end of supply hose. 8. Hose may be clamped to sprayer hitch side frame with plastic clamps. 9. Recommended placement of restrictor is nearest the hydraulic coupler. WARNING! RESTRICTOR INCLUDED IN THIS PACKAGE IS FOR OPERATOR SAFETY. MODERN TRAC- TORS HAVE TOO MUCH FLOW FOR OUR HYDRAULIC SYSTEM AND MAY PUT DAMAG- ING STRESSES ON THE ULTIMATE BOOMS. FLOW CONTROLS ON THE TRACTOR ARE ADJUSTABLE BUT ADJUSTMENTS, IF PERFORMED AT ALL, WILL VARY FROM OPERATOR TO OPERATOR. FOR SAFETY AND SPRAYER LIFE THE RESTRICTOR MUST BE INSTALLED. FAILURE TO DO SO COULD VOID ANY BOOM WARRANTY YOU HAVE. After installation of this option the remote tip lift function will now be independent of the Ultimate switch box on the one circuit only. The remaining tip lift could have the option installed also, or the switch on that tip lift cylinder could be left on and the operator would then have separate control with two different hydraulic circuits. The sprayer switch box will still function exactly the same as it had prior to the installation of the separate control. Operator will have two different means of controlling the same circuit. Parts required Component Description Quantity per 8D3 MALE TIP 3/4-6ORB ISO.000 8G86 NYLON TIE - BLUE.00 8J500 * #6 JIC(M) X #6 JIC(M) UNION.000 8J550 3/4-6 ORB X #6 JIC(M) STR.000 8J5800 3/8 FPT X #6 JIC(F-SW) STR.000 8J600 9/6-8 ORB X #6 JIC(M).00 8J76 #6JIC(M) X #6JIC(F) /6 RESTR.000 8N3060 * 3/8 X 60 HYD HOSE #6FJX3000PSI.000 8N3348 3/8X 348 HYD HOSE #6FJX3000PSI.000 8S980 HYD HOSE CLAMP-SMALL-NYLON X00 NUT NY-LOCK 3/8-6NC GR ZDI * Not required on sprayer sizes less than 90 feet. 6.6

65 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.9. FOAM MARKER To install a foam marker Summers sprayer.. Determine side of sprayer to mount platform. Summers Mfg. Co., Inc. installs all platforms on right side of machine. Some sprayer models will have space on left side of machine so it may be desirable to mount it there.. Mount foamer platform. 3. Mount foamer on platform. 4. Assemble foam nozzle per foamer instructions. 5. Mount foamer nozzle on outer end of boom. Nozzle should not extend beyond the booms and must remain out of harms way during folding and unfolding. 6. Attach foamer lines to nozzle. 7. Route lines out of harms way back to foamer and secure to non moving parts. 8. Mount foamer control switch box near operator station. 9. Connect power source wires to strong battery power and ground terminals. 0. Route harness to foamer and connect mating connectors.. Mix foam and water per instructions.. Verify proper foamer operation 6.0. BOOM CLEAN OUT OPTION Cam lock couplings can be placed in desired location on the wet boom. Cam lock couplings can be used for flush sediment out of the wet boom tube or they can function as a boom drain. Boom cleanout quantity should closely match the number of boom control shut offs. Clean out installation.. Decide the purpose of cleanout operation. Drainage or flushing?. Decide on quantity of cleanouts required. 3. Verify sufficient room to mount clean out. If clean out can not be mounted on extreme run of boom section a location nearest the end may be adequate. 4. Mark aluminum for cleanout or Tee installation. For a tee installation -3/4 of aluminum must be cut out of the section and threaded so 0 nozzle spacing is maintained. 5. Install all fittings and check for interference and ease of operation. 6.7

66 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.. BOTTOM FILL FLOW METER PACKAGE Bottom fill flow meter is installed in the suction side of the sprayer plumbing between the bottom fill shut off valves and the tank bottom suction lines. It is used to provide an indication of the amount of liquid entering the tank. Its accuracy is plus or minus %. Flow meter installation.. Remove tank supply line from end of plumbing fittings.. Mount flow meter in line and install suction line. Flow meter should be rotated or adjusted to obtain the best possible view of the display. If sprayer has a rinse system the tank selector ball valve will be mounted between the flow meter and the fluid tanks. 3. Install bolt plate to nearest sprayer cross member. 4. Install bushing bracket to bolt plate. 5. Install threaded flow meter bracket to bushing bracket and to flow meter. 6. Tighten all fittings and check for interference and ease of operation. 6.. CLEAN LOAD PACKAGE To install a Cleanload on a Summers Pull-Type Sprayer. Locate the front most elbow on pump discharge (plumbing attached to pump that feeds the booms) plumbing. Install tee, clamp, gasket, ball valve, and hose barb fitting. Ball valve and fitting are directed to the front of machine. Existing plumbing will connect to rear facing port on tee.. Mount cleanload with bracket to inside right hitch side frame using large u-bolt. 3. Attach the short piece of hose from inlet ball valve to inlet side of chemical eductor and tighten hose clamps. 4. Locate and drill a 3 diameter hole in the top of main tank near the front and center. The fitting should be in an area of the tank that will allow it to seal. 5. Install bulkhead and fittings in the top of the tank. 6. Install hose and clamps connecting Cleanload eductor to top of tank. 7. Use extra rubber hose inside tank to drop down lower into the tank. This will help to reduce foaming when adding chemicals. The hose may need to be perforated near the tank top fitting to prevent siphoning. Cleanload Operating Procedure Loading. All Cleanload valves must be closed prior to starting. Inlet ball valve, knife valve, and hopper rinse ball valve.. Open lid to check for foreign objects which may hinder performance or contaminate the system. 3. Close and lock lid by turning cover clockwise. 4. Divert pump flow to cleanload inlet line (open valves C or P ). A pressure of 30 PSI minimum and 50 PSI maximum must be used. Highest pressures increase the eduction rate and available wand suction. 5. Open knife valve located on the bottom of hopper by pushing handle in. 6. Unlock and open lid slowly by turning cover counterclockwise. 6.8

67 SECTION 6 - OPTION NOTES AND INSTRUCTIONS Loading Liquid or Powdered Chemical into Hopper 7. Pour required amount of chemical into hopper. Avoid splashing liquids or powdered chemicals outside of hopper. 8. Rinse empty chemical containers if applicable. Place container opening over container rinse valve and press down. This will activate the rinse valve and rinse container. 9. Rinse cleanload hopper. Close and lock lid by turning cover clockwise. Release the safety return locking band to locked position. 0. Open lid and inspect for chemical residue. Repeat step 0 as necessary.. Close knife valve by pulling red handle out towards you. Turn inlet valve off. Loading Liquid and or Powdered Chemical with Optional Suction Lance Note: Lance suction is dependant on eductor pressure and fl ow. For best results use highest pressure available up to 50 PSI maximum.. Insert lance body with o-ring into eductor until the o-ring is sealed. 3. Use free end of lance to pierce bag or container and vacuum powdered or liquid chemical. 4. Rinse lance. Place lance end into a clean container of water to rinse lance assembly. 5. Remove lance body from eductor and drain any remaining fluid into hopper. 6. Close knife valve by pulling red handle out towards you. Turn inlet valve off. Shutdown. Close knife valve first by pulling red handle out towards you.. Insure that the remaining valves are closed. 3. Verify chemical residue has been cleaned up. 4. Close hopper lid and lock by turning clockwise. 5. Divert pump discharge flow back to normal operation by closing valves C or P ELECTRIC AGITATOR SHUTOFF PACKAGE To install Electric agitator shutoff on a Summers Pull-Type Sprayer. Install the mounting bracket on ball valve.. Locate square tube on front of sprayer hitch where the mounting bracket will attach. 3. Attach mounting bracket and ball valve to square tube in line with existing agitator feed hose. 4. Install fittings into ball valve. 5. Cut existing agitator feed hose near ball valve shutoff and attach hoses to ball valve fittings. 6. Locate switch box accessory leads on right side of sprayer main frame or near hydraulic block on rear of sprayer. 7. Connect ball valve wire harness to available lead. 8. Energize switch box and locate switch to controls agitator ball valve motor. 9. Agitator flow is regulated by manual ball valve on discharge plumbing. 0. Electric shutoff will enable and disable flow as desired. 6.9

68 SECTION 6 - OPTION NOTES AND INSTRUCTIONS 6.4. REMOTE PILOT OPERATED CHECK VALVE PACKAGE For option # 8L430 (JIC) & 8L43 (NPT). Locate hydraulic lines coming from ports I and F on hydraulic block.. Trace lines back to just behind the slow moving emblem where the lines tee off. 3. Install pilot check valve (8L0036) in those lines. Lines coming from summers block will attach to ports v and v. 4. The lines coming from cylinders will route to c and c and will attach to block with tee. 5. Care must be maintained to insure that the I hose will still route to the rod side of the cylinders through the V-C or V-C path. The other F hose will go to the remaining port series either or so we don t have hose crossing. 6. Tighten all fittings and reinstall the slow moving emblem. 7. Locate the pressure relief cartridge in the summer s hydraulic block and replace it with new one from package. 8. Locate cartridge F and replace it with one of the new cartridges in the kit. 9. Replace the original coil on F with one of the new e coils in the package. 0. Hook up coil to original wire using wetherpack to deutsch adapter harness if required.. Locate cartridge I and replace it with remaining new cartridges from the kit.. Use care when removing existing cartridge because there is an orifice under the cartridge that can fall out. Replace the original orifice with an offset orifice from the package. 3. Reinstall the I cartridge and replace coil with new e coil. 4. Hook up coil using wiring adaptor. 5. Test the system for proper operation in full extension or full retraction of part cylinders. 6. Inspect for hydraulic leaks 7. Verify the boom drift to forward position is gone and boom remains where it was left by operator. These instructions should help you install the pilot operated check valve package. The pilot check valve will prevent the booms from moving forward while sprayer is in use. They will also permit the relief valve to function properly if the booms have not been lifted from the transport cradle prior to any unfolding operations. The relief valve will protect the eye bolts from being broken during unfolding. The relief valve will be isolated from the rest of the circuit during spraying operations and boom drift should be eliminated. 6.0

69 SECTION 7 - SPECIFICATIONS 7.. SPRAYER SIZES AND NOZZLE QUANTITY ACTUAL SPRAYING TOTAL PART PART EXTENSION WIDTH NOZZLES (6) (6) - 8 () (6) 3-4 (4) () () - 8 () (30) () 3-4 (4) () () - 8 () () 3-4 (4) () () - 8 () () 3-4 (4) () (36) () - 9 () () 3-4 (4) (5) OVERALL WIDTH AND LENGTH DIMENSIONS ACTUAL SPRAYING WIDTH TOTAL LENGTH IN FIELD TRANSPORT WIDTH WO/ WINDSHIELDS 7. TRANSPORT WIDTH W/ WINDSHIELDS TRANSPORT LENGTH NA 9-4

70 SECTION 7 - SPECIFICATIONS 7.3. TIRE PRESSURE SPECIFICATIONS AND CART WHEEL SPACING TIRE SIZE (BRAND) LOAD INDEX RECOMMENDED AIR MODEL PRESSURE (MAX) 480/80R38 (GOODYEAR) (35) 000/650 ULT 380/90R46 (GOODYEAR) * (58) 000/650 ULT CENTER TO CENTER SPACING NARROW AXLE 8, 88, 96, 0, 09, 4, 0 *76 Spacing also possible with this tire WIDE AXLE 09, 0, 3, 44, 5 BEET AXLE 88, 96, 09, 0, 3 NARROW CART NARROW AXLE 7, 76, 80, 89, 60-0 Duals NARROW CART WIDE AXLE 76, 80, 89, 99, 09, 3, 60-0, 80-0, 88-3 Duals *60 Spacing also possible with this tire 7.4. TANK SPECIFICATIONS CAPACITY ULTRAVIOLET JET FILL WELL STRAINER TANK (U.S. GALLONS) PROTECTED AGITATORS DIAMETER BASKET POLYTHYLENE MAIN 000 CROP CARE SINGLE 6 MESH 500 CROP CARE SINGLE CROP CARE SINGLE 6 RINSE 7 SINGLE YES - 0 INDUCTOR 6.5 JUG RINSE & CONE SPRAY BALL CLEAN 5-5 WATER INDUCTOR 6.5 JUG RINSE & CONE SPRAY BALL 7.5. OVERALL HEIGHT AND CLEARANCE DIMENSIONS MODEL OVERALL CART AXLE HEIGHT CLEARANCE CLEARANCE * * ULTIMATE TIRES ULTIMATE TIRES *MEASURED ON CONCRETE SURFACE WITH FULL TANK 7.

71 SECTION 7 - SPECIFICATIONS 7.6. MISCELLANEOUS COMPONENT SPECIFICATIONS COMPONENT PUMP LINE STRAINER FLOW METER BALL VALVES REGULATOR VALVE ELECTRIC BALL VALVES NOZZLES TIPS CAPS SCREENS RAVEN 05 CONTROL RAVEN 450 CONTROL RAVEN 4400 CONTROL SPECIFICATIONS See Hydraulic or PTO pump manual. -/ Flange, 0 or 80 mesh heavy-duty screen. -/ Flange, 60 GPM (000 GPM optional). Quarter turn on/off. Flange, electronic. Flange, electronic. See Electric Ball Valves manual. Single, dual or triple split eyelet type with diaphragm check valve. 80 or 0, Extended Range (XR), color-coded, stainless steel. Quarter turn, color coded, self-aligning. 00 or 50 mesh. See Raven Sprayer Control Systems manual. See Raven SCS-450 manual. See Raven SCS-4400 manual PLUMBING SPECIFICATIONS PLUMBING HOSE SIZE PLUMBING HOSE SIZE SUPPLY SIDE 3 WET BOOM BOTTOM FILL or 3 SIGHT TUBE 3/4 INDUCTION CONE -/ TANK DRAIN 3/4 PRESSURE SIDE -/ HYDRAULIC PUMP / AGITATOR HYDRAULIC CYLINDERS /4 & 3/8 BOOM FEED LINE HYDRAULIC CONTROL BLOCK 3/8 7.3

72 SECTION 7 - SPECIFICATIONS 7.8 BOLT TORQUE SPECIFICATIONS BOLT SIZE TORQUE /4 7 ft-lbs 5/6 5 ft-lbs 3/8 30 ft-lbs 7/6 45 ft-lbs / 70 ft-lbs 9/6 wheel bolts ft-lbs 5/8 wheel bolts & bolts 70 ft-lbs 3/4 wheel bolts & bolts 50 ft-lbs 7/8 350 ft-lbs 450 ft-lbs -/4 500 ft-lbs -/ 570 ft-lbs 00 ft-lbs NOTES 7.4

73 REMEMBER TO BRING OWNER REGISTER INFORMATION LOCATED AT THE BEGINNING OF THIS MANUAL WHEN ORDERING PARTS (SERIAL NUMBER IS LOCATED BY THE HITCH PIECE). 8.

74 4 X 8 CART PACKAGE GAL TANK 8S5857 8X00 3/4 X -/4" 8S407A 8X038 3/4" FW 8D8490 8D8500 8X0303 /" LW 8X040 X 7" 8X036 " FW 8X040 /" N 8D460 8X040 8D853 8S00 #3 X 4 LINK CHAIN 8X0309 " LW 8X080 " N 8A030 8L475 8K555 3/4 X 4-/6 X 6" 8L470L 8X060 3/4" N 8X0306 3/4" LW 8X05A 3/4 X 3.5" 8C760 3/4 X 8-/6 X 6" 8X003 3/8" FN 8X060 3/4" N 8X007 3/4 X " 8X0306 3/4" LW 8S039 3/8X3X4-/8" 8S0330 /X3X4-/4" 8S496 8X0505 /8"X-3/8" S-HOOK PAGE OF 3 7/8/03 8S9370.iam/000 GAL ULT NT CART PKG 8.

75 4 X 8 CART PACKAGE GAL TANK 8S447 8X0303 /" LW 8X006 /" X " 8S448 8L4666 8S445 8X003 /4" X -/" 8A30 4" PNL MNT GAGE 8T574 CLAMP.5" 8S4463 8X03 /4" FN 8S44 8S4435 8S446 8X0303 /" LW 8X0063 / X -/" 8X060 3/4" N 8X03 /4" FN 8S440 8X0306 3/4" LW 8S0360 5/8 X 6-/6 X 4-/" 8X0330 /" FW 8X0303 /" LW 8X0063 / X -/" 8X0009 /4" X " 8S44 8S440 8S4305 8T574 CLAMP.5" 8G008 8C760 3/4 X 8-/6 X 6" 8S44 8X003 3/8" FN 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8L065 8S4440 8X003 3/8" FN 8X0 CRG 3/8"x" 8S443 8L4660 8X050 5/8" N 8X0304 5/8" LW 8C755 3/4 X 6 X 6" 8X0560 8X06 3/4" LN 8D0350 3/4"X4-/6"X0" 8S4434 8X060 3/4" N 8A007 3/4" HC 8A009 3/4"HB & 3/4"FPT E 8L06 5/6XX" 8S445 8X006 /" X " 8X0306 3/4" LW 8S308 SPIGOT 8S4433 8X0 5/6 LN 8S4554 8S4435 8X003 3/8" FN PAGE OF 3 7/8/03 8S9370.iam/000 GAL ULT NT CART PKG 8.3

76 4 X 8 CART PACKAGE GAL TANK 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A4005 (TO PUMP VENT) 8A000 /4" HC 8F397A /4"HB X /8"MPT E, BR 8A007 3/4"HB X 3/4"MPT 8A000 /4" HC 8F397A /4"HB X /8"MPT E, BR 8A007 3/4" HC 8A4005 8A05 3/4" HB E 8A405 TUBING 3/4" CLR-57-/" 8A007 3/4" HC 8A3 3/4" HB E 8A007 3/4" HC 8A400 8A007 3/4" HC 8A300 9/6"X" FLOAT 8F940 APPLCTR HOSE 3/8" 8A50 3/4" BV 8A007 3/4" HC 8A007 3/4" HC 8S308 SPIGOT 8A05 3/4" HB E 8A007 3/4"HB X 3/4"MPT 8A400 8A007 3/4"HB X 3/4"MPT 8A009 3/4"HB & 3/4"FPT E 8A4037 8A7 3/4" HB T 8A007 3/4" HC 8A005 4" HC 8A400 3/4" BH 8A063 3" 45 SE 8A33T 8A06 JA ASSY 8A44 3" BH 8A35 FC 300 8A4 3" GSKT 8A6 3" 90 FE 8A73 3/4 JA MPT 8A008 3/4" SE 8A400 3/4" BH 8A07 "HB X 3/4"MPT E 8A009 " HC 8S3 8A446 8A445 8A448 8A447B 8A450 8A400 8A06 8S34 8A033B 3/4" AT EXT PAGE 3 OF 3 7/8/03 8S9370.iam/000 GAL ULT NT CART PKG 8.4

77 4 X 8 CART PACKAGE GAL TANK 8X038 3/4" FW 8X007 3/4 X " 8S438 8X0306 3/4" LW 8S5857 8S407A 8X00 3/4 X -/4" 8D8500 8X038 3/4" FW 8D8490 8X040 /" N 8D470 8X040 X 7" 8X0309 " LW 8D853 8X040 8S00 #3 X 4 LINK CHAIN 8X036 " FW 8X080 " N 8A050 8A054 8K555 3/4 X 4-/6 X 6" 8L475 8L470L 8X060 3/4" N 8X05A 3/4 X 3.5" 8X007 3/4 X " 8X0306 3/4" LW 8C760 3/4 X 8-/6 X 6" 8X003 3/8" FN 8X060 3/4" N 8X0306 3/4" LW 8X0303 /" LW 8S039 3/8X3X4-/8" 8S0330 /X3X4-/4" 8S496 8X0505 /8"X-3/8" S-HOOK PAGE OF 3 7/8/03 8S9374.iam/500 GAL ULT NT CART PKG 8.5

78 4 X 8 CART PACKAGE GAL TANK 8S447 8X0303 /" LW 8X006 /" X " 8S448 8S446 8X0 CRG 3/8"x" 8X003 3/8" FN 8X003 /4" X -/" 8T574 CLAMP.5" 8S440 8X0330 /" FW 8X0009 /4" X " 8S440 8S44 8X03 /4" FN 8X03 /4" FN 8X060 3/4" N 8X0303 /" LW 8X0306 3/4" LW 8X0063 / X -/" 8X0303 /" LW 8S4430 8S440 8A30 4" PNL MNT GAGE 8S4308 8S4435 8S443 8G008 8X0063 / X -/" 8S44 8X003 3/8" FN 8C760 3/4 X 8-/6 X 6" 8X04 NY-LOCK /" N 8X0 CRG 3/8"x" 8L065 8X0560 8S4440 8X003 3/8" FN 8X0 CRG 3/8"x" 8S443 8L4660 8C755 3/4 X 6 X 6" 8X06 3/4" LN 8S4434 8D0350 3/4"X4-/6"X0" 8X006 /" X " 8S445 8S4433 8X060 3/4" N 8X0306 3/4" LW 8A007 3/4" HC 8X0 5/6 LN 8A009 3/4"HB & 3/4"FPT E 8S308 SPIGOT 8S4554 8L06 5/6XX" 8S4435 8X003 3/8" FN PAGE OF 3 7/8/03 8S9374.iam/500 GAL ULT NT CART PKG 8.6

79 4 X 8 CART PACKAGE GAL TANK 8A06 JA ASSY 8A447B 8A450 8A400 3/4" BH 8A07 "HB X 3/4"MPT E 8S3 8A446 8A448 8S34 8F397A /4"HB X /8"MPT E, BR 8A73 3/4 JA MPT 8A06 8A008 3/4" SE 8A033B 3/4" AT EXT 8A000 /4" HC 8A334 8A009 " HC 8A400 PAGE 3 OF 3 7/8/03 8S9374.iam/500 GAL ULT NT CART PKG 8A4005 (TO PUMP VENT) 8F397A /4"HB X /8"MPT E, BR 8A445 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8A4005 8A05 3/4" HB E 8A007 3/4" HC 8A405 TUBING 3/4" CLR-76" 8.7 8A063 3" 45 SE 8A44 3" BH 8A300 9/6"X" FLOAT 8A007 3/4" HC 8F940 APPLCTR HOSE 3/8" 8A007 3/4" HC 8A009 3/4"HB & 3/4"FPT E 8S308 SPIGOT 8A35 FC 300 8A4 3" GSKT 8A6 3" 90 FE 8A3 3/4" HB E 8A4037 8A007 3/4" HC 8A400 8A007 3/4" HC 8A005 4" HC 8A007 3/4" HC 8A400 3/4" BH 8A50 3/4" BV 8A05 3/4" HB E 8A7 3/4" HB T 8A400 8A007 3/4"HB X 3/4"MPT 8A007 3/4"HB X 3/4"MPT

80 4 X 8 CART PACKAGE GAL TANK 8A05 8A054 8K555 3/4 X 4-/6 X 6" 8L475 8X007 3/4 X " 8X038 3/4" FW 8X0306 3/4" LW 8S438 8L470L 8X0306 3/4" LW 8X060 3/4" N 8D470 8X040 X 7" 8X038 3/4" FW 8X00 3/4 X -/4" 8D8490 8S407A 8D8500 8X0309 " LW 8S5857 8D853 8X040 8X040 /" N 8S00 #3 X 4 LINK CHAIN 8X0303 /" LW 8X003 3/8" FN 8S039 3/8X3X4-/8" 8S0330 /X3X4-/4" 8S496 8X0505 /8"X-3/8" S-HOOK 8X060 3/4" N 8X05A 3/4 X 3.5" 8X0306 3/4" LW 8X007 3/4 X " 8C760 3/4 X 8-/6 X 6" 8X036 " FW 8X080 " N PAGE OF 3 7/8/03 8S9376.iam/650 GAL ULT NT CART PKG 8.8

81 4 X 8 CART PACKAGE GAL TANK 8S447 8X0303 /" LW 8X006 /" X " 8S448 8X0 CRG 3/8"x" 8S446 8T574 CLAMP.5" 8S440 8X003 /4" X -/" 8X0330 /" FW 8X0009 /4" X " 8S440 8S44 8X03 /4" FN 8X003 3/8" FN 8X03 /4" FN 8X0303 /" LW 8X060 3/4" N 8X0063 / X -/" 8X0306 3/4" LW 8X0303 /" LW 8X0063 / X -/" 8S4430 8S4435 8S443 8S44 8X003 3/8" FN 8A30 4" PNL MNT GAGE 8S440 8C760 3/4 X 8-/6 X 6" 8G008 8S4308 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8L065 8S4440 8X003 3/8" FN 8X0 CRG 3/8"x" 8S443 8L4660 8C755 3/4 X 6 X 6" 8X0560 8X06 3/4" LN 8S4434 8D0350 3/4"X4-/6"X0" 8S445 8X060 3/4" N 8A007 3/4" HC 8A009 3/4"HB & 3/4"FPT E 8L06 5/6XX" 8S308 SPIGOT 8S4554 8X006 /" X " 8X0306 3/4" LW 8X0 5/6 LN 8S4433 8S4435 8X003 3/8" FN PAGE OF 3 7/8/03 8S9376.iam/650 GAL ULT NT CART PKG 8.9

82 4 X 8 CART PACKAGE GAL TANK 8A4005 (TO PUMP VENT) 8A000 /4" HC 8F397A /4"HB X /8"MPT E, BR 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8F397A /4"HB X /8"MPT E, BR 8A007 3/4" HC 8A4005 8A007 3/4"HB X 3/4"MPT 8A05 3/4" HB E 8A007 3/4" HC 8A405 TUBING 3/4" CLR-76" 8A06 JA ASSY 8A007 3/4" HC 8A3 3/4" HB E 8A007 3/4" HC 8A300 9/6"X" FLOAT 8A400 8F940 APPLCTR HOSE 3/8" 8A50 3/4" BV 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8S308 SPIGOT 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8A009 3/4"HB & 3/4"FPT E 8A7 3/4" HB T 8A4037 8A005 4" HC 8A400 3/4" BH 8A05 3/4" HB E 8A400 8A063 3" 45 SE 8A44 3" BH 8A35 FC 300 8A4 3" GSKT 8A6 3" 90 FE 8A73 3/4 JA MPT 8A008 3/4" SE 8A06 8A033B 3/4" AT EXT 8A336 8A447B 8A450 8A400 3/4" BH 8A07 "HB X 3/4"MPT E 8S3 8A446 8A445 8A448 8S34 8A009 " HC 8A400 PAGE 3 OF 3 7/8/03 8S9376.iam/650 GAL ULT NT CART PKG 8.0

83 NARROW CART PACKAGE GAL TANK 8A030 8A06 8K555 3/4 X 4-/6 X 6" 8L465L 8A030 8X059 3/4" JN 8L470L 8X060 3/4" N 8X05A 3/4 X 3.5" 8X0306 3/4" LW 8X00 3/4 X -/4" 8S403 8D8500 8X060 3/4" N 8X0306 3/4" LW 8X007 3/4 X " 8C760 3/4 X 8-/6 X 6" 8X038 3/4" FW 8D8490 8S5857 8X0303 /" LW 8S0330 /X3X4-/4" 8X040 X 7" 8X040 /" N 8X040 8S496 8D460 8X036 " FW 8X080 " N 8S00 #3 X 4 LINK CHAIN 8D853 8X0505 /8"X-3/8" S-HOOK 8X0309 " LW PAGE OF 3 7/8/03 8S933.iam/000 GAL NARROW CART PKG 8.

84 NARROW CART PACKAGE GAL TANK 8S4454 8S4454 8S447 8X0303 /" LW 8X006 /" X " 8X003 /4" X -/" 8T574 CLAMP.5" 8L035 CAPLUG 8X0 CRG 3/8"x" 8S440 8S448 8X0330 /" FW 8X0303 /" LW 8X0063 / X -/" 8S0360 5/8 X 6-/6 X 4-/" 8S4305 8A30 4" PNL MNT GAGE 8S44 8S4465 8X03 /4" FN 8S44 8S440 8T574 CLAMP.5" 8X003 3/8" FN 8S4464 8X0303 /" LW 8X060 3/4" N 8X0063 / X -/" 8X0306 3/4" LW 8S4464 8X007 3/4 X " 8L4665 8S44 8C760 3/4 X 8-/6 X 6" 8X0304 5/8" LW 8X050 5/8" N 8X0009 /4" X " 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8X0 CRG 3/8"x" 8S4440 8X003 3/8" FN 8S443 8X0 CRG 3/8"x" 8L4658R 8L466 8D350 /X3/7-/4" 8X040 /" N 8X0303 /" LW 8L4658L 8X06 3/4" LN 8A009 3/4"HB & 3/4"FPT E 8L065 8X0560 8C760 3/4 X 8-/6 X 6" 8S445 8S4434 8S4554 8X0 5/6 LN 8A007 3/4" HC 8X0306 3/4" LW 8X006 /" X " 8S308 SPIGOT 8L06 5/6XX" 8X060 3/4" N 8S4433 8X003 3/8" FN 8S4435 PAGE OF 3 7/8/03 8S933.iam/000 GAL NARROW CART PKG 8.

85 NARROW CART PACKAGE GAL TANK 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8F397A /4"HB X /8"MPT E, BR 8A000 /4" HC 8A4005 8A4005 (TO PUMP VENT) 8F397A /4"HB X /8"MPT E, BR 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8A000 /4" HC 8A405 TUBING 3/4" CLR-57-/" 8A05 3/4" HB E 8A007 3/4" HC 8A300 9/6"X" FLOAT 8F940 APPLCTR HOSE 3/8" 8A3 3/4" HB E 8A400 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8A400 8A50 3/4" BV 8A007 3/4" HC 8S308 SPIGOT 8A7 3/4" HB T 8A007 3/4"HB X 3/4"MPT 8A009 3/4"HB & 3/4"FPT E 8A007 3/4" HC 8A4037 8A05 3/4" HB E 8A400 3/4" BH 8A009 " HC 8A07 "HB X 3/4"MPT E 8A063 3" 45 SE 8A44 3" BH 8A35 FC 300 8A4 3" GSKT 8A6 3" 90 FE 8A005 4" HC 8A06 8A08 3/4"MPT X () "HB T 8A400 8A73 3/4" JA MPT 8A008 3/4" SE 8A033B 3/4" AT EXT 8A33N 8A447B 8A450 8A446 8A400 3/4" BH 8S35 8S3 8A445 8A448 8A009 " HC 8A400 PAGE 3 OF 3 7/8/03 8S933.iam/000 GAL NARROW CART PKG 8.3

86 NARROW CART PACKAGE - 50 GAL TANK 8A030 8A08 8A030 8K555 3/4 X 4-/6 X 6" 8L465L 8X0850 3/4 X.5" STUD 8X059 3/4" JN 8L470L 8A066 8X05A 3/4 X 3.5" 8X0306 3/4" LW 8X060 3/4" N 8X00 3/4 X -/4" 8S403 8D8500 8X060 3/4" N 8X007 3/4 X " 8X0306 3/4" LW 8C760 3/4 X 8-/6 X 6" 8S5857 8X038 3/4" FW 8X0303 /" LW 8X040 X 7" 8D8490 8X040 /" N 8X040 8S0330 /X3X4-/4" 8S496 8D470 8S00 #3 X 4 LINK CHAIN 8X0505 /8"X-3/8" S-HOOK 8X036 " FW 8X0309 " LW 8X080 " N 8D853 PAGE OF 3 7/8/03 8S9334.iam/50 GAL NARROW CART PKG 8.4

87 NARROW CART PACKAGE - 50 GAL TANK 8S4450 8S447 8X006 /" X " 8X003 /4" X -/" 8T574 CLAMP.5" 8L035 CAPLUG 8S4450 8X0 CRG 3/8"x" 8X003 3/8" FN 8S440 8X0303 /" LW 8S448 8X0330 /" FW 8X0303 /" LW 8X0063 / X -/" 8S0360 5/8 X 6-/6 X 4-/" 8X050 5/8" N 8X0009 /4" X " 8S4308 8S440 8S44 8X03 /4" FN 8S446 8S4460 8X060 3/4" N 8X0306 3/4" LW 8X007 3/4 X " 8L4665 8X0304 5/8" LW 8S44 8S440 8C760 3/4 X 8-/6 X 6" 8A30 4" PNL MNT GAGE 8G008 8X0 CRG 3/8"x" 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8S4440 8X003 3/8" FN 8S443 8X0 CRG 3/8"x" 8L4658R 8L4658L 8A009 3/4"HB & 3/4"FPT E 8L065 8X0560 8X06 3/4" LN 8C760 3/4 X 8-/6 X 6" 8S445 8S4554 8X0 5/6 LN 8A007 3/4" HC 8X0306 3/4" LW 8X006 /" X " 8S4434 8S308 SPIGOT 8L06 5/6XX" 8X060 3/4" N 8S4433 8X003 3/8" FN 8S4435 PAGE OF 3 7/8/03 8S9334.iam/50 GAL NARROW CART PKG 8.5

88 NARROW CART PACKAGE - 50 GAL TANK 8F397A /4"HB X /8"MPT E, BR 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8A000 /4" HC 8A4005 8A4005 (TO PUMP VENT) 8A339 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8F397A /4"HB X /8"MPT E, BR 8A000 /4" HC 8A405 TUBING 3/4" CLR-76" 8A05 3/4" HB E 8A447B 8A450 8A007 3/4" HC 8A446 8A300 9/6"X" FLOAT 8A3 3/4" HB E 8F940 APPLCTR HOSE 3/8" 8A400 8A400 8A007 3/4" HC 8A007 3/4" HC 8S308 SPIGOT 8A7 3/4" HB T 8A009 3/4"HB & 3/4"FPT E 8A400 3/4" BH 8A4037 8A063 3" 45 SE 8A44 3" BH 8A35 FC 300 8A4 3" GSKT 8A07 "HB X 3/4"MPT E 8A6 3" 90 FE 8A009 " HC 8A73 3/4" JA MPT 8A400 3/4" BH 8S35 8S3 8A445 8A448 8A007 3/4"HB X 3/4"MPT 8A50 3/4" BV 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8A05 3/4" HB E 8A005 4" HC 8A009 " HC 8A08 3/4"MPT X () "HB T 8A400 8A06 8A008 3/4" SE 8A033B 3/4" AT EXT 8A400 PAGE 3 OF 3 7/8/03 8S9334.iam/50 GAL NARROW CART PKG 8.6

89 NARROW CART PACKAGE GAL TANK 8A050 8A030 8A050 8X0850 3/4 X.5" STUD 8K555 3/4 X 4-/6 X 6" 8A054 8A064 8L465L 8X059 3/4" JN 8L470L 8X038 3/4" FW 8X007 3/4 X " 8X0306 3/4" LW 8S438 8X05A 3/4 X 3.5" 8X0306 3/4" LW 8X060 3/4" N 8S403H 8X060 3/4" N 8X0306 3/4" LW 8X007 3/4 X " 8C760 3/4 X 8-/6 X 6" 8X040 X 7" 8X00 3/4 X -/4" 8X038 3/4" FW 8D8490 8D8500 8S5857 8X040 /" N 8X040 8X0303 /" LW 8S0330 /X3X4-/4" 8S496 8D470 8X036 " FW 8X0309 " LW 8X080 " N 8S00 #3 X 4 LINK CHAIN 8D853 8X0505 /8"X-3/8" S-HOOK PAGE OF 3 7/8/03 8S9336.iam/500 GAL NARROW CART PKG 8.7

90 NARROW CART PACKAGE GAL TANK 8S4450 8S447 8X006 /" X " 8S4450 8X0303 /" LW 8X003 /4" X -/" 8S4308 8S440 8X0009 /4" X " 8T574 CLAMP.5" 8L035 CAPLUG 8X0 CRG 3/8"x" 8S44 8S446 8X03 /4" FN 8X003 3/8" FN 8X060 3/4" N 8X0306 3/4" LW 8S440 8L4665 8S448 8X0330 /" FW 8X0304 5/8" LW 8X0303 /" LW 8X0063 / X -/" 8S0360 5/8 X 6-/6 X 4-/" 8X050 5/8" N 8X007 3/4 X " 8S44 8S440 8S4460 8C760 3/4 X 8-/6 X 6" 8A30 4" PNL MNT GAGE 8G008 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8X0 CRG 3/8"x" 8S4440 8X003 3/8" FN 8S443 8X0 CRG 3/8"x" 8L4658R 8L4658L 8X06 3/4" LN 8A009 3/4"HB & 3/4"FPT E 8L065 8X0560 8C760 3/4 X 8-/6 X 6" 8S445 8S4554 8X0 5/6 LN 8A007 3/4" HC 8X0306 3/4" LW 8X006 /" X " 8S4434 8S308 SPIGOT 8L06 5/6XX" 8X060 3/4" N 8S4433 8X003 3/8" FN 8S4435 PAGE OF 3 7/8/03 8S9336.iam/500 GAL NARROW CART PKG 8.8

91 NARROW CART PACKAGE GAL TANK 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8A000 /4" HC 8A4005 8F397A /4"HB X /8"MPT E, BR 8A4005 (TO PUMP VENT) 8F397A /4"HB X /8"MPT E, BR 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8A000 /4" HC 8A405 TUBING 3/4" CLR-76" 8A05 3/4" HB E 8A007 3/4" HC 8A300 9/6"X" FLOAT 8A3 3/4" HB E 8F940 APPLCTR HOSE 3/8" 8A400 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8A400 8S308 SPIGOT 8A50 3/4" BV 8A007 3/4" HC 8A7 3/4" HB T 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8A009 3/4"HB & 3/4"FPT E 8A4037 8A400 3/4" BH 8A05 3/4" HB E 8A063 3" 45 SE 8A44 3" BH 8A005 4" HC 8A009 " HC 8A07 "HB X 3/4"MPT E 8A35 FC 300 8A6 3" 90 FE 8A008 3/4" SE 8A4 3" GSKT 8A73 3/4" JA MPT 8A06 8A08 3/4"MPT X () "HB T 8A009 " HC 8A033B 3/4" AT EXT 8A400 8A335 8A447B 8A450 8A446 8S3 8A445 8S35 8A448 8A400 3/4" BH 8A400 PAGE 3 OF 3 7/8/03 8S9336.iam/500 GAL NARROW CART PKG 8.9

92 NARROW CART PACKAGE GAL TANK 8A048 8A058 8K555 3/4 X 4-/6 X 6" 8A054 8L465L 8A058 8X059 3/4" JN 8L470L 8X038 3/4" FW 8X007 3/4 X " 8X0306 3/4" LW 8S438 8X05A 3/4 X 3.5" 8X0306 3/4" LW 8X060 3/4" N 8S403H 8X060 3/4" N 8X0306 3/4" LW 8X007 3/4 X " 8C760 3/4 X 8-/6 X 6" 8X040 X 7" 8X00 3/4 X -/4" 8X038 3/4" FW 8D8490 8D8500 8S5857 8X040 /" N 8X040 8X0303 /" LW 8S0330 /X3X4-/4" 8S496 8D470 8X036 " FW 8X0309 " LW 8X080 " N 8S00 #3 X 4 LINK CHAIN 8D853 8X0505 /8"X-3/8" S-HOOK PAGE OF 3 7/8/03 8S9338.iam/650 GAL NARROW CART PKG 8.0

93 NARROW CART PACKAGE GAL TANK 8S4450 8X006 /" X " 8S447 8S4450 8X0303 /" LW 8S448 8X003 /4" X -/" 8T574 CLAMP.5" 8L035 CAPLUG 8X0 CRG 3/8"x" 8X003 3/8" FN 8S440 8X0330 /" FW 8X0303 /" LW 8X0063 / X -/" 8S0360 5/8 X 6-/6 X 4-/" 8X0009 /4" X " 8S4308 8S440 8S44 8S446 8X03 /4" FN 8S4460 8X060 3/4" N 8X0306 3/4" LW 8X007 3/4 X " 8L4665 8S44 8X0304 5/8" LW 8X050 5/8" N 8A30 4" PNL MNT GAGE 8S440 8C760 3/4 X 8-/6 X 6" 8G008 8X0 CRG 3/8"x" 8X04 NY-LOCK /" N 8X0 CRG 3/8"x" 8S4440 8X003 3/8" FN 8S443 8X0 CRG 3/8"x" 8L4658R 8L4658L 8X06 3/4" LN 8A009 3/4"HB & 3/4"FPT E 8L065 8X0560 8C760 3/4 X 8-/6 X 6" 8S4554 8A007 3/4" HC 8X0306 3/4" LW 8S445 8X0 5/6 LN 8X006 /" X " 8S4434 8S308 SPIGOT 8L06 5/6XX" 8X060 3/4" N 8S4433 8X003 3/8" FN 8S4435 PAGE OF 3 7/8/03 8S9338.iam/650 GAL NARROW CART PKG 8.

94 NARROW CART PACKAGE GAL TANK 8F397A /4"HB X /8"MPT E, BR 8A37 3/4" PIPE CAP 8A000 /4" HC 8A000 /4" HC 8A4005 8F397A /4"HB X /8"MPT E, BR 8F397A /4"HB X /8"MPT E, BR 8A4005 (TO PUMP VENT) 8A007 3/4"HB X 3/4"MPT 8A007 3/4" HC 8A000 /4" HC 8A05 3/4" HB E 8A405 TUBING 3/4" CLR-76" 8A007 3/4" HC 8A400 8A300 9/6"X" FLOAT 8A3 3/4" HB E 8F940 APPLCTR HOSE 3/8" 8A400 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8S308 SPIGOT 8A50 3/4" BV 8A007 3/4" HC 8A7 3/4" HB T 8A007 3/4" HC 8A007 3/4"HB X 3/4"MPT 8A009 3/4"HB & 3/4"FPT E 8A400 3/4" BH 8A4037 8A05 3/4" HB E 8A07 "HB X 3/4"MPT E 8A063 3" 45 SE 8A44 3" BH 8A35 FC 300 8A4 3" GSKT 8A005 4" HC 8A009 " HC 8A6 3" 90 FE 8A008 3/4" SE 8A08 3/4"MPT X () "HB T 8A009 " HC 8A73 3/4" JA MPT 8A06 8A033B 3/4" AT EXT 8A400 8A335N 8A335N 8A335N 8A335N 8S3 8A335N 8A335N 8A335N 8A400 3/4" BH 8A400 PAGE 3 OF 3 7/8/03 8S9338.iam/650 GAL NARROW CART PKG 8.

95 8Z084 ADHERES TO FRAME 8S4049A 8X06 3/4" LN 8S4036 8X07 3/4 X 7" 8X00 5/8-NC X 9" 8S404 PN QTY 8S4036 8S4037 8S404 8S4048A 8S4049A 8X00 8X07 4 8X03 4 8X053 8X06 8 8Z084 8X053 NY-LOCK 5/8"-NC 8X06 3/4" LN 8S4048A 8S4037 8X03 3/4" X 5.5" /3/03 8S9398A.iam/STANDARD AXLE PKG

96 8S4059A 8S4036 8Z084 ADHERES TO FRAME 8S405 8X07 3/4 X 7" PN 8S4036 8S4037 8S405 8S4058A 8S4059A 8X00 8X07 8X03 8X053 8X06 8Z084 8X06 3/4" LN 8X053 NY-LOCK 5/8"-NC 8X06 3/4" LN 8S4058A 8S4037 8X00 5/8-NC X 9" 8X03 3/4" X 5.5" //04 8S9399A.iam/WIDE AXLE PKG. 0 - QTY

97 8Z084 ADHERES TO FRAME 8S4059A 8S4036 8X07 3/4 X 7" 8S4047 8X06 3/4" LN 8X053 NY-LOCK 5/8"-NC 8X06 3/4" LN 8X06 3/4" LN 8S4058A 8S4037 8X00 5/8-NC X 9" 8X03 3/4" X 5.5" //04 8S9400A.iam/ BEET AXLE 0 - PN 8S4036 8S4037 8S4047 8S4058A 8S4059A 8X00 8X07 8X03 8X053 8X06 8Z084 QTY

98 WIDE AXLE PACKAGE FOR NARROW CART 8S406A 8X06 3/4" LN 8X03 3/4" X 5.5" 8S4037 8X053 NY-LOCK 5/8"-NC 8S4036 8Z086 8X07 3/4 X 7" USE WITH DUALS PN 8S4036 8S4037 8S404 8S4060A 8S406A 8X00 8X07 8X03 8X053 8X06 8Z086 8X00 5/8-NC X 9" 8X06 3/4" LN 8S404 8S4060A //04 8S940A/WIDE AXLE PKG NRRW 0 - QTY

99 NARROW AXLE PACKAGE FOR NARROW CART PN QTY 8S4036 8S4037 8S4043 8S406A 8S4063A 8S4063A 8X00 8X07 4 8X03 4 8X053 8X06 3/4" LN 8X06 8Z X00 5/8-NC X 9" 8S4037 8X06 3/4" LN 8S4043 8X03 3/4" X 5.5" 8S406A 8X053 NY-LOCK 5/8"-NC 8S4036 8Z086 8X07 3/4 X 7" USE WITH SINGLE TIRES 0/0/04 8S940A/ NRRW AXLE PKG NRRW CART 0-8.7

100 5,000 LB HUB PACKAGE 8X039 X 3" 8S4083A 8X0303 /" LW LEFT SIDE SHOWN 8X0309 " LW 8X040 /" N 8X080 " N 8X0075 / X 6" PN QTY 8K09 8K750 8K75 8S4083A 8X0075 8X X040 8X X0303 8X K750 K (3X.3") 8K75 5K (3.38X.3") 8K09 FOR H00 LT SEE HUB BREAKDOWN CHECK INDEX FOR PAGE NO.) 8/8/05 8S953A.iam/5K SPINDLE/HUB 0-8.8

101 5,000 LB HUB PACKAGE 8S4084R 8X080 " N 8X060 3/4" N 8X0306 3/4" LW 8K0A SEE HUB BREAKDOWN (CHECK INDEX FOR PAGE NO.) PN QTY 8K0A 8K75 8X0309 " LW 8X039 X 3" 8K75B 8S4084L 8X08 8X039 8X060 8X080 8X0306 8X0309 8X08 3/4" X 8-/"GR8 8K75A (4.5X.84") 8K75 (4.5X.") 8/8/05 8S9534B.iam/ 5K SPINDLE/HUB 0-8.9

102 SINGLE 480/80R38 TRACTOR TIRE/RIM PACKAGE (ULTIMATE) 8Z078 DECAL X 8S70G OR 8S70 8S75 8S80 YELLOW 8S80G GRAY *SET AXLE TO 88" WHEEL SPACING. *TIGHTEN WHEEL NUTS TO 0 FT. LBS. //03 8S9393U.iam/480/80R38 TIRE/RIM PKG ULT/RA 8.30

103 SINGLE 380/90R46 TRACTOR TIRE/RIM PACKAGE (ULTIMATE) 8Z078 8S90G OR 8S90 8S95 8S300 YELLOW 8S300G GRAY *SET AXLE TO 88" WHEEL SPACING. *TIGHTEN WHEEL NUTS TO 0 FT. LBS. //03 8S9397.iam/380/90R46 TIRE/RIM PKG ULT/RA 8.3

104 DUAL 380/90R46 TRACTOR TIRE/RIM PACKAGE ("SPACING) 8S95 8S9 OR 8S99G 8S30 OR 8S30G 8K75B 8S400 8Z078 8K7 8K73 8S95 8S300 OR 8S300G 8S90 OR 8S90G TIGHTEN WHEEL NUTS TO 0 FT-LBS. /3/03 8S9397D.idw/DUAL 380/90R46 - " SPACING 8.3

105 DUAL 380/90R46 TRACTOR TIRE/RIM PACKAGE (30"SPACING) 8S95 8S94 OR 8S94G 8S30 OR 8S30G 8K75B 8S40 8Z078 8K7 8K73 8S300 OR 8S300G 8S95 8S90 OR 8S90G TIGHTEN WHEEL NUTS TO 0 FT-LBS. /6/03 8S9397E.idw/DUAL 380/90R46-30" SPACING 8.33

106 QT PN 8A006 SINGLE RINSE TANK PACKAGE 4 8A007 8A009 8L07 5/6 X 3 X 7" 8A5 8A007 3/4" HC (NARROW CART ONLY) 8A3 8A400 3/4" HOSE 8A3A 8A05 3/4" HB E 8A400 8A4048 " TIE 8A /8" TIE 8A40 8A007 3/4" HC 8A405 TIE 8A43 8A005G 8A0 8A005G 3/4"MPT X () 3/4"HB TEE 8Z088A 8A03B 8A05 8A400 3/4" BH 8A0 8A0 3/4"X4" NPL 8Z054 RINSE TANK TAG 8Z058 TANK NOZZLE TAG 8A0 8A4 8F30 "FPT SPRAY NOZ 8A33 8A53 8A55 6 8A A4050 8A3A 8A C760 8F30 8L068 5/6 X 3 X 4" 8A0 3/4"HB X "MPT E 8G0030 8L068 8G0030 8A007 3/4" HC 8L07 8A5 " BV 3WAY 8L0309 8A3G-GRAY 8A3-YELLOW 8L0309 CAPLUG 8S039 3/8X3X4-/8" 8L400 8L400 8L4003 8C760 3/4 X 8-/6 X 6" 8X003 3/8" FN 8X0 5/6" FN 8S039 8A03B " PLUG 8A400 3/4" HOSE 8X0067 8X060 3/4" N 8L4003 8A009 " HC 8X003 8X0306 3/4" LW 8X0 8X0303 /" LW 8A43 " ANTI-VORTEX 8A006.5" HC 8 8X060 8A4 "X" BTM DRN 8A403.5" FERT HOSE 8X0303 8X0330 /" FW 8A53 "X" HB, E 8 8X0306 8X0067 /-3NCX-/4" 8A0 E " HB X " MPT 8A009 " HC 8X0330 8A40 GSKT 8A400 " HOSE 8Z088A 8A33 " FLNG CLMP TO MAIN TANK 8Z054 8Z058 8A55 FLNG 90 X.5"HB E COMMON PLUMBING SUCTION SIDE TO COMMON PLUMBING PRESSURE SIDE 8A006.5" HC /0/03 8S9945.iam/SINGLE SIDE MNTD RNSE TANK

107 DUAL RINSE TANK PACKAGE 8L07 5/6 X 3 X 7" (NARROW CENTER ONLY) 8A4048 " TIE 8A /8" TIE 8A405 TIE 8A400 3/4" HOSE 8A007 3/4" HC 8Z088A 8Z054 RINSE TANK TAG 8Z058 TANK NOZZLE TAG 8A005G 3/4"MPT X () 3/4"HB TEE 8A0 3/4"X4" NPL 8A400 3/4" BH 8F30 "FPT SPRAY NOZ 8L068 5/6 X 3 X 4" 8A400 3/4" HOSE 8A53 "X" HB, E 8A009 " HC 8S039 3/8X3X4-/8" 8A007 3/4" HC 8A0 3/4"HB X "MPT E 8A400 " HOSE 8A009 " HC 8A5 " BV 3WAY 8A0 E " HB X " MPT 8X003 3/8" FN 8A03B " PLUG 8G0030 8X0 5/6" FN 8A006.5" HC 8L0309 CAPLUG 8A00 TEE.5 HB 8C760 3/4 X 8-/6 X 6" 8X0306 3/4" LW 8X060 3/4" N 8A403.5" FERT HOSE TO COMMON PLUMBING PRESSURE SIDE COMMON PLUMBING SUCTION SIDE TO MAIN TANK PN QTY 8A A A009 8A007 3/4" HC 8A05 3/4" HB E 8A5 8A3 8A3A 8A400 8A40 8A43 8A005G 8A0 8A03B 8A05 8A00 8A0 8A0 8A4 8A33 8A34 8A53 8A3A 8A55 8A A A405 8C A3G-GRAY 8A3-YELLOW 8F30 8G0030 8L068 8L07 8L L400 8L400 8L4003 8A43 " ANTI-VORTEX 8X0303 /" LW 8L4003 8S039 8X0067 8X A4 "X" BTM DRN 8X0330 /" FW 8X0067 /-3NCX-/4" 8X0 8X060 8X A006.5" HC 8A40 GSKT 8A33 " FLNG CLMP 8A55 FLNG 90 X.5"HB E 8X0306 8X0330 8Z088A 8Z054 8Z /0/03 8S9946.iam/DUAL SIDE MNTD RNSE TANK 8.35

108 3" COMMON PLUMBING PACKAGE 8A33A " FLNG PLUG X /4" FPT 8A40 GSKT 8A33 " FLNG CLMP 8A40 GSKT 8A33 " PLUG 8A40 GSKT 8A3A FLNG ELBW 90 8A40 GSKT 8A33 " FLNG CLMP 8A33 " FLNG CLMP 8A38 GASKET 8A33 " FLNG CLMP 8A40 GSKT 8A33 " FLNG CLMP 8A96 " FLNG T 8A96 " FLNG T 8A3 " CLAMP 8A38 GASKET 8A33 " FLNG CLMP 8A40 GSKT 8A33 " FLNG CLMP 8A40 GSKT 8A5 "FLNG X " HB E 8A350 " BV 8A3 " CLAMP 8A4 3" GSKT 8A405 -/4" X " GSKT 8A330 FLNG PLUG 8A300C 8A300E 8A304 8A34 " CLMP 8A300B 8A38 8A38 GASKET 8A96 " FLNG T 8X060 3/4" N 8A3 " CLAMP 8A40 GSKT 8A95 FLNG TEE 8A35 FC 300 8A300 8A300A 8A34 8A40 GSKT 8A76 8A35 FC 300 8A4 3" GSKT 8A33 " PLUG 8A33 " FLNG CLMP 8A33 " FLNG CLMP 8A34 " CLMP 8A40 GSKT 8A33 " FLNG CLMP 8A600 8X003 3/8" FN 8A40 GSKT 8A333 8A4 3" GSKT 8A35 FC 300 8A4 3" GSKT 8A35 FC 300 8A4 3" GSKT 8S480 8A4 3" GSKT 8A33 8A35 FC 300 8S037 8A99 8A4 3" GSKT 8A35 FC 300 8A35 FC 300 8A57.5"HBX"FLNG 8A35 FC 300 8A4 3" GSKT 8A405 -/4" X " GSKT 8A333 8A74 3" BALL VALVE 8A35 FC 300 8A495 8A4 3" GSKT 8A37 3" FLNG MALE QUICK CPLR 8A74 3" BV 8Z05 MN TANK SUCTION TAG 8A4 3" GSKT 8A35 FC 300 8A4 3" GSKT 8A34 8A33 " FLNG CLMP 8A35 FC 300 8A99 8A35 FC 300 8A4048 " TIE 8A38 8A4 3" GSKT 8A35 FC 300 8A4 3" GSKT 8A37A 8Z053 MN TANK VENT TAG 8Z058 MN TANK AGITATOR TAG 8A35 FC 300 8A4 3" GSKT 8A35 FC 300 8A4 3" GSKT 8A738 8A35 FC 300 8A4 3" GSKT 8A37 3" FLNG MALE QUICK CPLR 8A765 8A6 3" 90 FE 8A760 " COUPLER END CAP PN QTY 8A40 8A405 8A4 6 8A495 8A600 8A738 8A74 8A760 8A76 8A765 8A3 3 8A33 8A34 8A35 6 8A38 3 8A5 8A57 8A6 8A95 8A96 3 8A99 8A300 8A36 8A37A 8A3A 8A33 8A38 8A330 8A33 8A33A 8A333 8A34 8A350 8A37 8A G S095 8S037 8S S480 8S476 8S478 8S3054 /4" CAPLUG 8S478 8S476 8X003 3/8" FN 8G800 3/8 X -5/6 X -/4" 8S480 8S48 8S48 8X X Z05 8Z058 8Z053 5//04 8S945.iam/3" COMMON PLUMBING PACKAGE 8.36

109 8A54 E "FLNGX.5"HB 8A33 " FLNG CLMP 8A40 GSKT 8S989 8S989 8S9893 8S9894 8S9895 8S9898 8S994 8S995 8S996 8S997 8S998 8S999 8S99 8A38 GASKET 8A3 " CLAMP 8F393 E /4" BRASS 8A008.5" HC 8L0630 /8/00 8S995.iam/TRIPL ELECTRIC BVLV PKG ULT 8A308 8G00 8A600 (SINGLE REPLACEMENT VALVE) 8X040 /" N 8X0303 /" LW 8X033 5/6" ID FW 8X0308 /4" LW 8X0000 /4 X 3/4" 8S0330 /X3X4-/4" A38 GASKET 8A3 " CLAMP 8A5 "FLNG X " HB E 8S995 TRIPLE ELECTRIC BALLVALVE PACKAGE SHOWN. ASSEMBLY IS SIMILAR FOR ALL BALLVALVE PACKAGES LISTED IN TABLE ABOVE.

110 OPTIONAL HMC STAINLESS STEEL HYDRAULIC PUMP PACKAGE 8F397 /8" MPT X /4" HB 8A S-HMC 8F399F VALVE /8" FPT X /8" MPT 8J550 3/4" ORB X #0 STR 8N44 /" X 4" 8X0007 3/8" X -/" 8F399F VALVE /8" FPT X /8" MPT 8X003 3/8" FN 8J550 3/4" ORB X #0 STR 8A040 7/8 X 4 ORB CHECK VALVE 8S3095 HYD CAPLUG 8D3 3/4" ORB TIP ISO 8J5540 7/8" ORB X #0 STR CHK *APPLY TEFLON TAPE TO ALL MPT/FPT CONNECTIONS *SEALANT IS NOT REQUIRED FOR O-RING OR FLARE TYPE CONNECTIONS //05 8S9463/HMS STD CAP/STAINLESS PMP PKG 8.38

111 STANDARD CAP/PRESSURE HYDRAULIC FLANGED PUMP PACKAGE PN QTY 8A056A 8D3 8D34 8F397 8F399F 8G8 6 8J504 8J504 #4 ORB X #6 JIC ELBOW 8F397 /8" MPT X /4" HB 8J550 8J550 8J S3095 8F399F VALVE /8" FPT X /8" MPT 8X0007 8X003 8N336 3/8" X 36" 8J550 3/4" ORB X #0 STR 8F399F VALVE /8" FPT X /8" MPT 8J550 3/4" ORB X #6 JIC(M) SEE PAGE 8.68 FOR BREAKDOWN 8D34 3/4"-6 ORB FLT FACE 8N40 /" X 0" 8J5540 7/8" ORB X #0 STR CHK 8X0007 3/8" X -/" 8X003 3/8" FN 8A056A 9303C-HMC 8S3095 HYD CAPLUG 8N438 /" X 38" 8J550 3/4" ORB X #0 STR 8D3 3/4" ORB TIP ISO *APPLY TEFLON TAPE TO ALL MPT/FPT CONNECTIONS *SEALANT IS NOT REQUIRED FOR O-RING OR FLARE TYPE CONNECTIONS 7/6/03 8S9453A.iam/HMC STD CAP/PRESSURE PUMP PKG 8.39

112 OPTIONAL PTO STD CAP/PRESSURE PUMP PACKAGES 8A006.5" HC 8A89 X /" HB FLNG 8A9 " X " HB FP FLNG 8A095 /" CPLR HB EL 8A006 8A406.5" HC /" X 96" RH 8L470 8A7 /4" HM 8A098 /" FPT ADPTR 8A4005 /4" 96" VLH 8F397D /4"HB X QK DSC 8A4035 " X 96" FH 8A3 /" X /4" RN 8A000 /4" HC 8A78 MNTG CLIP KIT 8F397C /8" MP CPLR 8A00 " HC 8S080 5/6 X X 3/4" 8A75 " CPLR HB OR 8A753 " CPLR HB EL 8X0 5/6 LN 8A757 " FPT ADPTR 8S095 3/8 X 5/8 X 4 /4" 8S47 8A35 " X /" RN 8X0007 3/8" X -/" 8X00 3/8" LN 8A80 LOCKING COLLAR KIT 8A050 C RPM PUMP OR 8A05 C RPM PUMP OR 8A053 C RPM 8-SPLINE *APPLY TEFLON TAPE TO ALL MPT/FPT CONNECTIONS. *SEALANT IS NOT REQUIRED FOR O-RING OR FLARE TYPE CONNECTIONS 8S RPM PKG 8S RPM PKG 8X003 3/8" FN 8S946/PTO PUMP PKG 000RPM 8 SPLINE 8S9458/PTO PUMP PKG 540RPM ULT 4/6/00 8S9460/PTO PUMP PKG 000RPM ULT 8.40

113 BELT DRIVE PTO STD CAP/PRESSURE PUMP PACKAGES 8A095 /" CPLR HB EL 8A006.5" HC 8A7 /4" HM 8A406 /" X 96" RH 8A4005 /4" 96" VLH 8A006.5" HC 8A89 X /" HB FLNG 8L470 8A9 " X " HB FP FLNG 8A098 /" FPT ADPTR 8A3 /" X /4" RN 8F397D /4"HB X QK DSC 8A000 /4" HC 8A4035 " X 96" FH 8S080 5/6 X X 3/4" 8F397C /8" MP CPLR 8A757 " FPT ADPTR 8A75 " CPLR HB OR 8A753 " CPLR HB EL 8A00 " HC 8S095 3/8 X 5/8 X 4 /4" 8X0 5/6 LN 8S47 8A35 " X /" RN 8X0007 3/8" X -/" 8X00 3/8" LN 8A054 *APPLY TEFLON TAPE TO ALL MPT/FPT CONNECTIONS. *SEALANT IS NOT REQUIRED FOR O-RING OR FLARE TYPE CONNECTIONS 8X003 3/8" FN 8S RPM PKG 8S RPM PKG /7/0 8S946/PTO PUMP PKG 000RPM ULT 8.4

114 8.4

115 05 CONTROL PLUMBING PACKAGE 8A88 "FLNG X -/4"HB 8A69 " FLNG RV 360 8A33 " FLNG CLMP 8A335 FLNG CPLG 8A40 GSKT 8A954 8A8B 8A00 " HC 8X0000 /4 X 3/4" 8A447 8X03 /4" FN 8S488 8S3054 8X060 3/4" N 8S486 8A8 8S476 8G800 3/8 X -5/6 X -/4" 8X003 3/8" FN /0/008 8S947/05 CONTROL PLUMBNG PKG ULT/RA 8.43

116 450 CONTROL PUMBING PACKAGE 8A405 TIE 8A830 " FLNG RV 8A847 SENSOR ONLY 8A846 60GPM FM 8A88 "FLNG X -/4"HB 8A33 " FLNG CLMP 8A00 " HC 8A447 8A40 GSKT 8X0000 /4 X 3/4" 8X03 /4" FN 8S3054 /4" CAPLUG 8X060 3/4" N 8S488 8S486 8G800 3/8 X -5/6 X -/4" 8S476 8X003 3/8" FN /7/03 8S9474/450 PLUMBING PKG ULTRA 8.44 PN 8A00 8A40 8A830 8A846 8A33 8A88 8A447 8G800 8S3054 8S476 8S486 8S488 8X0000 8X003 8X03 8X060 QTY 3 3 4

117 8A03 RAVEN SCS-05 CONTROL KIT (BV) 8A79C ' CABLE ASSY (BV) 05 CONTROL SYSTEM PACKAGE 8A74 CONSOLE ONLY (BV) 8A8 GAUGE LINE UNION 8A8 /4" MPT 8L0050A SWITCH BOX 8Z07 APPL RATE CHART 8A85 ' CABLE EXT. (BV) 8A8 GAUGE LINE UNION 8A404 //5 8S9475U 8A87 8Z006S OPER MANUAL 450 CONTROL SYSTEM PACKAGE 8L06S OPER MANUAL 8A85 GPS SPEED SENSOR 8L0050A SWITCH BOX 8A4335 0' CONSOLE CABLE ASSY (BV) 8A4340 ' CABLE EXT. (BV) 8A4345 6' FLOW CABLE ASSY (BV) 8A /8" TIE 8Z07 APPL RATE CHART 8Z (450) CONSOLE MANUAL 8A4350P 450 CONSOLE ONLY //5 8S9478A 8L0050A SWITCH BOX 4400 CONTROL SYSTEM PACKAGE 8A4336 5' CONSOLE CABLE ASSY (BV) 8Z07 APPL RATE CHART 8A85 GPS SPEED SENSOR 8A4348 ' FLOW CABLE ASSY (BV) 8Z06S OPER MANUAL 8A /8" TIE 8A CONSOLE //5 8S9479V /9/0 CONTROL SYSTEM PACKAGES

118 8.46

119 50' CENTER BOOM PACKAGE 60' - 90' ULTIMATE 8L4775 8L475 8L4734 8L475 8X0303 /" LW 8L473 8L473 8X040 /" N 8X08 NY-LOCK " 8S0330 /X3X4-/4" 8X040 X 7" 8.47 WIRING PART NUMBERS 8L SWITCH SPRING TOGGLE 8L006 - CART WIRNG HARNESS 8L007A - VALVE WIRNG HARNESS 8L008 - BOOM WIRING HARNESS 8K8030A - LIGHT MODULE 5/9/06 8L705/BOOM PKG 50'PRT&CNTR ULTIMATE

120 50' CENTER BOOM PACKAGE 60' - 90' ULTIMATE 8L4775 8L470 8L4779 8L470A 8S0330 /X3X4-/4" 8X003 /4" X -/" 8X04 NY-LOCK /" N 8L05 8L4550 8X00 3/8" LN 8X0 /4" LN 8L470A 8X0303 /" LW 8X0083 / X 8" 8L4705 8L4704 8X0098 5/8 X 3.5" 8L477 LH 8L478 RH 8X040 /" N 8X05 8L460 8X037 /4" FW 8L476A 8G055 8X083 /4" JN 8L4735R 8X08 NY-LOCK " 8X036 " FW 8L4709 8L4745 8L4703 8L056 8X038 X 5-/" 8S0074 /4" PC 8L474 8L4746 8L4737 8L460 x 4.9" PIN 8X084 /4" N 8S6 8L4770 8L4735L 8S0 8X00 3/8" N 8X030 3/8" LW 8G800 3/8 X -5/6 X -/4" 8S305 " CAPLUG 8D908 /4 X " RP 8X085 /" N 8X086 /" JN 8X03 /4" LW 8X00 3/8" LN 8S980 8T988 8X00 5/6" N 8L474 8S3054 /4" CAPLUG 8X059 3/4" JN 8X0300 5/6" LW 8L476 8X059 3/4" JN 8L4736A 8L0030 (MOUNTED ON RIGHT BOOM) 8S4030 8X039 X 3" 8X0309 " LW 8X080 " N 7L98 8L4785A LH (SHOWN) 8L4786A RH 8X08 NY-LOCK " 8L055 8X080 # X " 8X077 " JN 8L473 8X08 NY-LOCK " 8L05 8X038 X 5-/" 8L06 8D074 OPTIONAL 8D070 STD 8D07 OPTIONAL 8X036 " FW 8H304 " ID X.75" 8L479 8X000 3/8 X " 8X030 3/8" LW 8X030 3/8" FW 8L00 BUMPER 8X043 X5" 5/9/06 8L705/BOOM PKG 50'PRT&CNTR ULTIMATE 8.48

121 50' CENTER BOOM PACKAGE 60' - 90' ULTIMATE 8J5300 #6 JIC(M) TEE 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8D9 SEAL KIT 8D9 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8J560 3/4" X #6 JIC (F-SW) 8W588 3/4" RESTRICTOR 8L003 8J5300 #6 JIC(M) TEE 8C0600 8D9 8D95 8D93 SEAL KIT 8N336 3/8" x 36" 8D9 SEAL KIT 8N3348 3/8" x 348" 8J5500 8N360 /4 x 360" 8J550 3/4" ORB X #6 JIC(M) 8W589 RESTRICTOR A 8D9090 8D3 3/4" ORB TIP ISO 8L455 SEAL KIT 8J5300 8D909 SEAL KIT 8L004 8L030 8L45 BLOCK 8L459 CARTRIDGE 8L004 DETAIL A 8L466 NUT 8L473 COIL 5/9/06 8L705/BOOM PKG 50'PRT&CNTR ULTIMATE 8.49

122 60' CENTER BOOM PACKAGE 93' - 0' ULTIMATE 8L4734A 8L475 8L4775 8X050 5/8" N 8L473A 8X0304 5/8" LW 8X08 NY-LOCK " 8S0358 5/8 x 3-/6 x 4-/" 8X040 X 7" WIRING PART NUMBERS 8L SWITCH SPRING TOGGLE 8L006 - CART WIRING HARNESS 8L006 - CART HARNESS EXTENSION 8L007A - VALVE WIRING HARNESS 8L008 - BOOM WIRING HARNESS 8K8030A - LIGHT MODULE 5/3/06 8L706/ BOOM PKG 60'PRT&CNTR ULTIMATE 8.50

123 60' CENTER BOOM PACKAGE 93-0' ULTIMATE 8X04 NY-LOCK /" N 8L470 8L4775 8L4779 8L05 8L4704 8X003 /4" X -/" 8L4705 8L4550 8X0083 / X 8" 8X00 3/8" LN 8S0330 /X3X4-/4" 8X0 /4" LN 8L470A 8L470A 8X05 8X0098 5/8 X 3.5" 8L460 8X037 /4" FW 8L477 LH 8L478 RH 8L4745 8X0303 /" LW 8X040 /" N 7L98 8L056 8S0074 /4" PC 8L4746 8L4737 8L476A 8X084 /4" N 8L474 8G055 8X03 /4" LW 8L4736A 8L4735R 8X083 /4" JN 8X08 NY-LOCK " 8L4709 8X036 " FW 8X038 X 5-/" 8L460 x 4.9" PIN 8S6 8L4770 8L4735L 8G800 3/8 X -5/6 X -/4" 8D908 /4 X " RP 8L4703 8X085 /" N 8X00 3/8" LN 8X086 /" JN 8S0 8X00 3/8" N 8T988 8S980 8X030 3/8" LW 8S3054 /4" CAPLUG 8S305 " CAPLUG 8L0030 (MOUNTED ON RIGHT BOOM) 8X059 3/4" JN 8L473A 8L474A 8L476A 8X059 3/4" JN 8X059 3/4" JN 8X0300 5/6" LW 8L058 5/6X-/X-/" 8L478 LH (SHOWN) 8L4783 RH 8X043 X5" 8X038 X 5-/" 8L05 8D07 OPTIONAL 8D074 OPTIONAL 8D070 STD 8S408A 8X039 X 3" 8X0309 " LW 8X080 " N 8X08 NY-LOCK " 8X036 " FW 8H304 " ID X.75" 8L479 8X077 " JN 8X000 3/8 X " 8X030 3/8" LW 8X030 3/8" FW 8L00 BUMPER 8L06 8X08 NY-LOCK " 5/3/06 8L706/ BOOM PKG 60'PRT&CNTR ULTIMATE 8.5

124 60' CENTER BOOM PACKAGE 93' - 0' ULTIMATE 8J5300 #6 JIC(M) TEE 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8D9 SEAL KIT 8D9 8J560 3/4" X #6 JIC (F-SW) 8C0600 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8W588 3/4" RESTRICTOR 8D9 8D95 8L00 8D93 SEAL KIT 8L003 8J5300 #6 JIC(M) TEE 8J5500 8D9 SEAL KIT 8J550 3/4" ORB X #6 JIC(M) 8W589 8D3 3/4" ORB TIP ISO 8L004 8L473 COIL 8L466 NUT 8L455 SEAL KIT 8L459 CARTRIDGE 8L45 BLOCK 8J5300 8J560 8L004 8J6000 8J5600 DETAIL A 8D909 SEAL KIT 8D9090 A 8L030 5/3/06 8L706/ BOOM PKG 60'PRT&CNTR ULTIMATE 8.5

125 00' CENTER BOOM PACKAGE 0' - 33' ULTRA 8L4660 8S0360 5/8 X 6-/6 X 4-/" 8X0304 5/8" LW 8X050 5/8" N 8S0358 5/8 x 3-/6 x 4-/" 8L475 8L4675 8X060 3/4" N 8L4663 8L4734A 8D0350 3/4"X4-/6"X0" 8L4667 8L473A 8X0306 3/4" LW 8S400 8X0304 5/8" LW 8X040 X 7" 8X050 5/8" N 8X0306 3/4" LW 8X08 NY-LOCK " 8L465 8D0350 3/4"X4-/6"X0" 8X060 3/4" N WIRING PART NUMBERS 8L006 - CART WIRING HARNESS 8L007A - VALVE WIRING HARNESS 8L TRI-FOLD BOOM WIRING HARNESS 8L SWITCH SPRING TOGGLE 8K8030A - LIGHT MODULE 5/3/06 8L70/ BOOM PKG 00'PT--CNTR ULTRA 8.53

126 8L4675 8X04 NY-LOCK /" N 8X086 /" JN 8X00 3/8" LN 8L470A 8D07 OPTIONAL 8D074 OPTIONAL 8L466 8L4679 8X003 /4" X -/" 8L056 DETAIL A 8L4704 8L4705 TOP PLATE 8D070 8X0 /4" LN 8X04 " X 7-/" BTM PLATE 8S409A 8L048 8L4605 8X0080 / X " 8X007 3/4 X " 8S0330 /X3X4-/4" 8X0306 3/4" LW 8S0330 /X3X4-/4" 8L4550 8G004 8L4635L 8L4635R 8X085 /" N 8X036 " FW 8X08 NY-LOCK " 8L4746 7L99 8L4679 8X007 3/4 X " 8X053 ROLL PIN 8X039 X 3" 8L4670 8L4735R 8L4630 RH LH 8L056 8L05 8L4596 A /4" FW 8X080 " N 8L4608L 8X0309 8L4608R " LW 8S6 8L469 8D95_PIN 8L4736D 8X037 8X08 NY-LOCK " 8X036 " FW 8L066 8X00 5/6 X " 8L4735L SIMILAR TO 8D908 8X0007 3/8" X -/" 8L460 SECTION 8 - PARTS 8S0 8X00 3/8" N 8L4607 8X00 5/6" N 8X030 3/8" LW 8L474 8L466 8L460 x 4.9" PIN 8H304 " ID X.75" 8X077 8X0300 5/6" LW DETAIL D G800 3/8 X -5/6 X -/4" 8S305 " CAPLUG 8D908 /4 X " RP 8X030 3/8" LW 8X080 " N 8X086 /" JN 8X080 # X " 8L479 8L06 8X043 X5" 8S3054 /4" CAPLUG 8X06 3/4" LN 8L478 8X00 3/8" N 8L4683A RH 8L468A LH 8X08 8X085 /" N D DETAIL C 8X040 /" N C 8L05 8X036 " FW 00' CENTER BOOM PACKAGE 0' - 33' ULTRA 8X000 3/8 X " 7L347 8L070 8L4609 DETAIL B 8L060 8L055 8S0330 8X0303 /X3X4-/4" /" LW 8D908 /4 X " RP 8L46L B 8L4736A 8L00 BUMPER 8X05 3/4 X 3-/" 8X040 /" N 8X0303 /" LW 8W00 / X X 3-/4" 8X0309 " LW 8X0004 3/8 X.5" 8L45 8L467 8L4594 7S4698 8D54 /" WHEEL BOLT 8D30 8L043 8X05 3/4 X 3-/" 8X039 X 3" 8L4988 8X0063 / X -/" 8X036 " FW 8X08 NY-LOCK " 8X080 " N 8L4693 RH 8L469 LH 8L06 5/6XX" 8X0300 5/6" LW 8X040 /" N 8W00 / X X 3-/4" 8X00 3/8" N 8H304 " ID X.75" 8X0303 /" LW 8X030 3/8" LW 8X039 -/" FW DETAIL H 8L4640 LH 8L464 RH 5/3/06 8L70/ BOOM PKG 00'PT--CNTR ULTRA H 8X00 5/6" N 8X036 " FW 8X080 " N 8X077 " JN 8L479 8L308

127 8N096 /4 X 96" 8J598 #6 JIC(M+M+F-SW) TEE 8N036 /4" X 36" E 8J5300 #6 JIC(M) TEE 8X003 /4" X -/" 8L07 8L005 CHECK VLV 00' CENTER BOOM PACKAGE 0' - 33' ULTRA 8L004 8J560 3/4" X #6 JIC (F-SW) 8D9 SEAL KIT 8N07 /4 X 7" 8X003 3/8" FN 8L070 8X0 /4" LN 8L00 8L005 8N3035 3/8 X 35" 8D9 8J5300 #6 JIC(M) TEE 8N308 3/8 X 8" 8N054 /4 X 54" 8C0600 8S039 3/8X3X4-/8" 8W588 3/4" RESTRICTOR DETAIL E 8D95 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8D909 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8D93 SEAL KIT 8D907 SEAL KIT 8J5500 9/6" X #6 JIC(M) 8J5300 #6 JIC(M) TEE 8L0036 8J5600 9/6" X #6 JIC (F-SW) 8D9095 8N3390 3/8 X 390" 8J5500 8N050 /4" X 50" 8N04 /4 X 4" 8N036 /4 X 36" DETAIL F 8J6000 9/6ORB X #6JIC(M) 90 8J5700 #6 JIC(F-SW) X #6 JIC(M) 90 ADP 8D3 3/4" ORB TIP ISO 8J550 3/4" ORB X #6 JIC(M) 8N40 /4" X 40" F 8N400 /4 X 400" 8N0 8J5300 8J6000 8J600 3/4-6ORB X #6JIC(M) 90 ADP 8L004 8J5600 8D9094 SEAL KIT 8D9093 8L030 G 8L004 8L455 SEAL KIT 8J560 8J5300 8D9090 8L466 NUT 8L473 COIL 8L459 CARTRIDGE 8L45 BLOCK 8W589 DETAIL G 8J560 8D909 SEAL KIT 5/3/06 8L70/ BOOM PKG 00'PT--CNTR ULTRA 8.55

128 SECTION 8 - PARTS 5 FUNCTION MANIFOLD VALVE - 60' THRU 0' ULTIMATE 8L48 PLUG 8L460 8L455 SEALS 8L450B CART 8L473 COIL 8L455 SEALS 8L48 PLUG 8L450B CART 8L473 COIL 8L455 SEALS 8L479 ORIFACE INSTALLED WITH SLOT DOWN 8L478 ORIFACE INSTALLED IN HOSE PORT. 8L450B CART 8L473 COIL 8L455 SEALS 8L463 CV 8L504 SEALS 8L467 PISTON 8L454A CART 8L504 SEALS 8L463 CV 8L504 SEALS 8L467 PISTON 8L477 DISC INSTALLED UNDER CART. 8L450B CART 8L473 COIL 8L455 SEALS 8L478 ORIFACE INSTALLED IN HOSE PORT. 8L48 PLUG 8L480 PLUG 8L450B CART 8L473 COIL 8L455 SEALS 8L476B DISC INSTALLED UNDER CART 8L46 CV 8L504 SEALS PN QTY 8J5700 8J J6004 8J600 8L00 8/4/009 8L003/ MANIFOLD VLVE W/FITTINGS 05-6 FUNCTION MANIFOLD VALVE 0' THRU 33' ULTRA 8L450B CART 8L473 COIL 8L455 SEALS 8L450B CART 8L473 COIL 8L455 SEALS 8L479 ORIFACE INSTALLED WITH SLOT DOWN 8L478A ORIFACE INSTALLED IN HOSE PORT. 8L450B CART 8L473 COIL 8L455 SEALS 8L463 CV 8L504 SEALS 8L467 PISTON 8L460 8L455 SEALS 8L466 CV 8L504 SEALS 8L467 PISTON 8L477A DISC INSTALLED UNDER CART. 8L450B CART 8L473 COIL 8L455 SEALS 8L478A ORIFACE INSTALLED IN HOSE PORT. 8L450B CART 8L473 COIL 8L455 SEALS 8L476A DISC INSTALLED UNDER CART. 8L454A CART 8L504 SEALS 8L46 CV 8L504 SEALS PN QTY 8J J J600 8J J600 8L004 8/4/009 8L005/MANIFOLD VLVE W/FITTINGS

129 8X040 /" N 8X0303 /" LW 8L478 8S0330 /X3X4-/4" 8X04 NY-LOCK /" N 8L47 LH 8L47 RH 8X004 3/8" N 8L070 8L060 8X00 5/6" N 7L345 8L4609 BOOM PACKAGE 50' PART 0' ULTIMATE 8X0067 /-3NCX-/4" 8S060 8X0300 5/6" LW 8L058 5/6X-/X-/" 8D908 /4 X " RP 8L50 8L4788 LH 8L4789 RH LEFT SIDE SHOWN PN QTY 7L345 8D908 8L030 8L L06 4 8L050 8L060 8L070 8L50 8L4609 8L47 8L47 8L477 8L478 8L4788 8L4789 8S S060 8S X0067 8X00 5/6" N 8X0300 5/6" LW 8L477 8X078 8X004 8X00 8X0 8X040 8X04 8X0300 8X L058 5/6X-/X-/" 8L050 8X0 5/6" FN 8L06 5/6XX" 8L030 8X078 SELF-DRILL SCREW 8S305 " CAPLUG 5/4/00 8L704/ BOOM PKG 50' PART ULTIMATE 8.58

130 8X040 /" N 8X0303 /" LW 8L478 8S0330 /X3X4-/4" 8X04 NY-LOCK /" N 8L47 LH 8L47 RH 8X004 3/8" N 8L070 8X00 5/6" N 7L345 8L4609 8L060 8X0067 /-3NCX-/4" 8S060 8X0300 5/6" LW 8D908 /4 X " RP BOOM PACKAGE 40' PART 90' - 06'8" ULTIMATE 8L058 5/6X-/X-/" 8L45 8L4790 LH 8L479 RH LEFT SIDE SHOWN PN QTY 7L345 8D908 8L030 8L L06 4 8L050 8L060 8L070 8L45 8L4609 8L47 8L47 8L477 8L478 8L4790 8L479 8S S060 8X00 5/6" N 8X0300 5/6" LW 8L477 8S305 8X0067 8X078 8X004 8X00 8X0 8X040 8X04 8X X L058 5/6X-/X-/" 8L050 8X0 5/6" FN 8L06 5/6XX" 8X078 SELF-DRILL SCREW 8S305 " CAPLUG 8L030 5/4/00 8L7040/ BOOM PKG 40' PART ULTIMATE 8.59

131 8X0303 /" LW 8X040 /" N 8L478 8S0330 /X3X4-/4" 8X04 NY-LOCK /" N 8L47 LH 8L47 RH 8X004 3/8" N 8L060 8L070 8X00 5/6" N 7L345 8L4609 BOOM PACKAGE 30' PART 80' - 86'8" ULTIMATE PN 7L345 8D908 8L030 8L058 8X0067 /-3NCX-/4" 8L06 8L050 8L060 8L070 8L45 8S060 8L4609 8L47 8D908 /4 X " RP 8X0300 5/6" LW 8L058 5/6X-/X-/" 8L45 8L47 8L477 8L478 8L479 8L4793 8S0330 8S060 8S305 8X0067 8X078 8X00 5/6" N 8X004 8X00 8X0 8X0300 5/6" LW 8X040 8X04 8X0300 8X0303 8L477 8L058 5/6X-/X-/" 8L479 LH 8L4793 RH 8L050 8X0 5/6" FN 8L06 5/6XX" 8L030 LEFT SIDE SHOWN 8X078 SELF-DRILL SCREW 8S305 " CAPLUG 5/4/00 8L7030/ BOOM PKG 30' PART ULTIMATE QTY

132 8X040 /" N 8X0303 /" LW 8L478 8S0330 /X3X4-/4" 8X004 3/8" N 8L070 8L060 BOOM PACKAGE 0' PART 70' - 76'8" ULTIMATE PN 7L345 8D908 8L030 8L058 8L06 8X0067 /-3NCX-/4" 8L050 8L060 8L070 8L45 8X04 NY-LOCK /" N 8S060 8L47 LH 8L47 RH 8X00 5/6" N 7L345 8X0300 5/6" LW 8D908 /4 X " RP 8L058 5/6X-/X-/" 8L45 8L4609 8L47 8L47 8L477 8L478 8L4794 8L4795 8S0330 8S060 8S305 8X0067 8X078 8X004 8X00 8X0 8X040 8X00 5/6" N 8X0300 5/6" LW 8X04 8X0300 8X0303 8L4609 8L477 8L058 5/6X-/X-/" 8L050 8L4794 LH 8L4795 RH 8X0 5/6" FN 8L030 LEFT SIDE SHOWN 8L06 5/6XX" 8X078 SELF-DRILL SCREW 8S305 " CAPLUG 5/4/00 8L700/ BOOM PKG 0' PART ULTIMATE QTY

133 8L47 (LEFT) 8L47 (RIGHT) 7L345 8L4609 8X00 5/6" N 8X0300 5/6" LW 8L058 5/6X-/X-/" 8D908 /4 X " RP 8X0 5/6" FN 8L06 5/6XX" 8L050 8X034 7/6" LNUT BOOM PACKAGE 0' PART 60' - 66'8" ULTIMATE PN 7L345 8D908 8F80 8G004 8L030 8L058 8L06 8L050 8L4609 8L47 8L47 8X030 3/8" LW 8L4798 LH 8L4799 RH 8S039 3/8X3X4-/8" 8X00 3/8" N 8X039 -/" FW 8X030 3/8" LW 8X00 3/8" N 8L4990 8L4987 8F80 8L4798 8L4799 8L4987 8L4990 8S039 8S305 8X0008 8X0044 8X078 8X00 8X00 8X0 8X034 8X0300 8X033.5X5/3"ID 8X0044 7/6" X 3-/" 8X030 8X039 8X033 8G004 8X0008 3/8 X " 8L030 8S305 " CAPLUG 8X078 SELF-DRILL SCREW LEFT SIDE SHOWN //00 8L700/ BOOM PKG 0' PART ULTIMATE QTY

134 BOOM PACKAGE 33'4" PART 3 33'4" ULTRA PN 7L346 8F80 8L058 8L06 8L066 8L463L 8L4694 8L498 8L4987 8S0003 8S305 8S456 8X00 8X0047 8X043 8X00 8X0 8X034 8X08 8X0300 8X0308 8X039 8X033 //00 8L7033/ BOOM PKG 33'4" PART 3 ULTRA QTY 8X0047 7/6X6" 8F80 8X033.5X5/3"ID 8X034 7/6" LNUT 8L463L 8L463R 7L346 8X00 5/6" N 8X0300 5/6" LW 8L058 5/6X-/X-/" 8X043 X5" 8X08 NY-LOCK " 8L06 5/6XX" 8L498 (L - SHOWN) 8L4984 (R) 8X0308 /4" LW 8X039 -/" FW 8L4694 (L - SHOWN) 8L4695 (R) 8X0300 5/6" LW 8X00 5/6" N 8X00 5/6 X " 8S456 8L066 8L06 5/6XX" 8S305 " CAPLUG 6 8A4030 3" EA SIDE 8X0 5/6" FN 8S0003 8L06 5/6XX" 8L498 8L X00 5/6" N

135 8L498 8X0047 7/6X6" 8L4987 8A4030 3" EA. SIDE 8F80 8X033.5X5/3"ID 8X034 7/6" LNUT 8X00 5/6" N 8X043 X5" 8X039 -/" FW 8X0308 /4" LW 8L463L 8L463R 7L346 8X00 5/6" N 8X0300 5/6" LW 8L058 5/6X-/X-/" 8X08 NY-LOCK " 8L06 5/6XX" 8L498 (L - SHOWN) 8L4984 (R) BOOM PACKAGE 0' PART 3 0' ULTRA PN 7L346 8F80 8L058 8L06 8L066 8L463L 8L4684 8L498 8L4987 8S0003 8S305 8S456 8X00 8X0047 8X043 8L4684 (L - SHOWN) 8L4685 (R) 8X00 8X0 8X034 8X08 8X0300 8X0308 8X039 8X033 8X00 5/6" N 8X0300 5/6" LW 8X00 5/6 X " 8L066 8S456 8X0 5/6" FN 8L06 5/6XX" 8S0003 8L06 5/6XX" 8S305 " CAPLUG /4/03 8L703/BOOM PKG 0' PART 3 ULTRA QTY

136 8X04 NY-LOCK /" N 8X0069 /X3" BOOM PACKAGE 6' 8" EXT 66'8", 76'8", 86'8", 96'8", 06'8" ULTIMATE PN 8L4796 8X0069 8X04 8L4796 //005 8L7006/ BOOM PKG 6'8" EXT ULTIMATE QTY

137 8X04 NY-LOCK /" N BOOM PACKAGE 3' 4" EXT 63'4", 73'4", 83'4", 93'4", 03'4" ULTIMATE PN 8L4797 8X0069 8X04 8X0069 /X3" 8L4797 //005 8L7003/ BOOM PKG 3'4" EXT ULTIMATE QTY

138 EQUAL BOOM WIDTH OPTION 8A004 " T 8A0 E " HB X " MPT 8A009 " HC 8A06 E " 90 8A05 ' HB X " MPT TO BOOM VALVE 8A05 ' HB X " MPT 8A5 " BV 3WAY 8A009 " HC 8A05 ' HB X " MPT 8A06 E " 90 8A4 " HOSE MENDER 8A400 8A009 " HC 8A0 E " HB X " MPT 8L0630 PN 8A009 8A5 8A004 8A05 8A0 8A4 8A400 8A405 8L0630 8A400 8A400 /6/008 8L4957/ EQUAL BM WIDTH OPT ULT QTY 8 3 0'

139 00' CENTER WET BOOM PACKAGES 0'-33'4" ULTRA 8A06 E " 90 8A05 ' HB X " MPT 8A05 ' HB X " MPT 8A004 " T OPT. 8A00 " NIPPLE 8A009 " HC REAR CENTER 8L09 8X004 /4 X 3" 8S300 8L0944 8S3038 CVR PLT 8A06 E " 90 8A05 ' HB X " MPT LEFT PART 8A009 " HC LEFT PART 8A00 " NIPPLE 8A38 " CAP (OPT.) 8A06 E " 90 8A093 8A009 " HC 8S00 #3 X 4 LINK CHAIN OPT. 8A0 E " HB X " MPT PN 8A009 8A00 8A004 8A05 8A048A 8A079 8A079 QTY 9 7 8A093 8A38 " CAP 8A05 ' HB X " MPT 8S4560 8X0 /4" LN 8A009 " HC 8L0940 8A093 8A06 8A0 8A38 8L06 8L0306 8L A079 8S00 #3 X 4 LINK CHAIN 8A06 E " 90 8L06 5/6XX" 8X0300 5/6" LW 8X00 5/6" N 8A06 E " 90 8A05 ' HB X " MPT 8A048A " SWVL CPLNG FOR " SPACING CUT BULK AL TO LENGTH CENTER AND LEFT SIDE ONLY SHOWN 8L0940 8L0944 8S00 8S300 8S3038 8S4560 8X004 8X00 8X0 8X //0 8L770/ AL WTBM PKG00'(--CNTR)ULTRA 8.68

140 60' CENTER WET BOOM PACKAGES 93'4"-0' ULTIMATE OPT. 8A05 ' HB X " MPT 8A38 " CAP 8A06 E " 90 8A03 " SE 8L090 05" AL 8L093 05" SS 8A06 E " 90 8A05 ' HB X " MPT 8L09 4" AL BEET SPECIAL 8L094 85" AL OPT. 8A093 8S00 #3 X 4 LINK CHAIN REAR CENTER 8A079 8A05 ' HB X " MPT 8A06 E " 90 8S00 #3 X 4 LINK CHAIN 8A38 " CAP 8A004 " T 8A009 " HC 8A05 ' HB X " MPT 8X0 /4" LN 8A00 " NIPPLE 8A093 8A079 8X004 /4 X 3" 8S300 8S3038 CVR PLT 8A009 " HC LEFT PART 8L " SS 8L0973 BEET SP 8L0975 BEET SP PN 8A009 8A00 8A004 8A05 8A03 8A079 8A093 8A06 8A38 8A400 8A4050 8A405 8L0306 8L090 8L094 8S00 8S300 8S3038 8X004 8X0 FOR " SPACING CUT BULK TO LENGTH QTY ' OPT. CENTER AND LEFT SIDE ONLY SHOWN 6/9/0 8L760/AL WET BM PKG 60'PRT&CNTR ULT 8.69

141 50' CENTER WET BOOM PACKAGES 60'-90' ULTIMATE 8L090 05" AL 8L093 05" SS 8L09 5" AL BEET SP 8A06 E " 90 8A05 ' HB X " MPT REAR CENTER 8A009 " HC 8A093 OPT. 8A079 8S00 #3 X 4 LINK CHAIN 8X004 /4 X 3" 8A38 " CAP 8A05 ' HB X " MPT 8A004 " T 8A06 E " 90 8A009 " HC 8A00 " NIPPLE 8S00 #3 X 4 LINK CHAIN OPT. 8A093 8A079 8S300 8A05 ' HB X " MPT 8S3038 CVR PLT 8X0 /4" LN PN QTY 8A A00 8A004 8A05 5 8A03 8A079 8A38 " CAP 8A05 ' HB X " MPT OPT. 8A093 8A06 8A38 8A400 8A4050 8A405 8L0306 8L ' 30 8L0940 8A06 E " 90 8S00 8S300 8S3038 8X LEFT PART 8X0 30 8A03 " SE 8L0940 5" AL 8L0943 5" SS 8L " AL BEET SP 8L " AL BEET SP FOR " SPACING CUT BULK TO LENGTH CENTER AND LEFT SIDE ONLY SHOWN 8L750/SS WET BM PKG 50'PRT&CNTR ULT 6/9/0 8L750/AL WET BM PKG 50'PRT&CNTR ULT 8.70

142 50' PART WET BOOM PACKAGES 0' ULTIMATE 8A048A " SWVL CPLNG 8A05 8A009 ' HB X " MPT 8A009 " HC 8X004 /4 X 3" 8X0 /4" LN 8S300 8S3038 CVR PLT 8A06 E " 90 OPT. 8A079 8A38 " CAP 8A093 8S00 #3 X 4 LINK CHAIN OPT. TO END NOZZLE 8A004 " T 8A00 " NIPPLE 8L0306 CAPLUG 8S00 #3 X 4 LINK CHAIN 8A093 8A079 PN QTY 8L094 85" AL 8L " SS 8L " BEET SP 8L " BEET SP 8A009 8A00 8A004 8A05 8A048A 8A A093 8A06 8A38 8A ' 8L L094 8S00 8S S X004 3 FOR " SPACING CUT BULK TO LENGTH 8X0 3 8L74/SS WET BM PKG 50' PRT ULT 6/9/0 8L74/AL WET BM PKG 50' PRT ULT 8.7

143 40' PART WET BOOM PACKAGES 90'-06'8" ULTIMATE 8A38 " CAP OPT. 8A079 PN 8A009 8A00 8A004 8A05 8A048A 8A079 8A093 QTY 4 8A06 8A093 8A38 8A ' 8L S00 #3 X 4 LINK CHAIN 8L0940 8S00 8S300 8S3038 8X X0 4 8A048A " SWVL CPLNG 8A004 " T 8L0306 CAPLUG 8S00 #3 X 4 LINK CHAIN 8A079 TO END NOZZLE 8A00 " NIPPLE 8A093 OPT. 8A05 ' HB X " MPT 8A009 " HC 8X004 /4 X 3" 8L0940 5" AL 8L0943 5" SS 8L0964 7" AL BEET SP 8L " AL BEET SP 8S300 8A06 E " 90 8X0 /4" LN 8S3038 CVR PLT FOR " ALUMINUM CUT BULK TO LENGTH 8L740/SS WET BM PKG 40' PRT ULT 6/9/0 8L740/AL WET BM PKG 40' PRT ULT 8.7

144 30' PART WET BOOM PACKAGES 80'-86'8" ULTIMATE PN 8A009 8A00 8A004 8A05 8A048A 8A079 OPT. 8A079 8A38 " CAP 8A093 8A06 8A38 8A400 8L0306 8L0930 8S00 8A093 8S300 8S3038 8X004 8S00 #3 X 4 LINK CHAIN 8X0 TO END NOZZLE 8A004 " T 8A00 " NIPPLE 8A048A " SWVL CPLNG 8L0306 CAPLUG 8A093 8A05 ' HB X " MPT 8A009 " HC 8X004 /4 X 3" 8L " AL 8L " SS 8S00 #3 X 4 LINK CHAIN 8A079 OPT. 8S300 8X0 /4" LN 8S3038 CVR PLT 8A06 E " 90 8L730/SS WET BM PKG 30' PRT ULT 6/9/0 8L730/AL WET BM PKG 30' PRT ULT QTY 4 6.7'

145 0' PART WET BOOM PACKAGES 70'-76'8" ULTIMATE OPT. 8A079 PN 8A009 8A00 8A004 8A05 8A048A 8A079 QTY 4 8A093 8A093 8A38 " CAP 8A06 8A38 8A400 8L ' 8L090 8S00 8S S00 #3 X 4 LINK CHAIN 8S3038 8X004 8X0 6 8A004 " T TO END NOZZLE 8L0306 CAPLUG 8A00 " NIPPLE 8A05 ' HB X " MPT 8A009 " HC 8X004 /4 X 3" 8L090 05" AL 8L093 05" SS 8A093 8S00 #3 X 4 LINK CHAIN 8A079 OPT. 8S300 8X0 /4" LN 8S3038 CVR PLT 8A06 E " 90 8A048A " SWVL CPLNG 8L70/SS WET BM PKG 0' PRT ULT 6/9/0 8L70/AL WET BM PKG 0' PRT ULT 8.74

146 0' PART WET BOOM PACKAGES 60'-66'8" ULTIMATE 8A004 " T OPT. 8X004 /4 X 3" 8A009 " HC 8A05 ' HB X " MPT 8A048A " SWVL CPLNG 8L0306 CAPLUG 8S300 8X0 /4" LN 8S3038 CVR PLT 8A06 E " 90 PN 8S00 #3 X 4 LINK CHAIN 8A009 8A05 8A048A 8A06 8A00 " NIPPLE 8A079 8A38 8L0306 8L0908U 8S300 8S3038 8A093 8X004 8X0 8A093 8A079 8S00 8A38 " CAP 8A004 8A00 OPT. 8A093 8L0908U 45" AL 8L09 45" SS 8A079 8S00 #3 X 4 LINK CHAIN 8L70/SS WET BM PKG 0' PRT ULT 6/8/0 8L70/AL WET BM PKG 0' PRT ULT QTY

147 33'4" PART 3 WET BOOM PACKAGES 33'4" ULTRA PN 8A009 8A004 8A048 8A048A 8A079 8A087 QTY 8A38 " CAP 8A03 8A06 8A38 8A ' 8L A048 " CPLG 8L0906 8L0930 8S300 8S X X0 0 8L0306 CAPLUG 8L0906 (-3/8" ALUM) 8L0903 (-3/8" SS) 8A03 3/4"HB X "MPT 8A004 " T 8A009 " HC 8A03 3/4"HB X "MPT 8X004 /4 X 3" 8L0930 (65" ALUM) 8L0933 (65" SS) 8S300 8A087 8X0 /4" LN 8S3038 CVR PLT OPT. 8A079 8A06 E " 90 8A048A " SWVL CPLNG FOR " SPACING CUT BULK TO LENGTH 8L733/SS WET BM PKG 33'4" PRT3 ULTRA 6/8/0 8L733/AL WET BM PKG 33'4" PRT3 ULTRA 8.76

148 0' PART 3 WET BOOM PACKAGES 0' ULTRA 8X004 /4 X 3" 8A03 3/4"HB X "MPT 8A009 " HC 8A03 3/4"HB X "MPT 8A004 " T 8S300 8A087 OPT. 8S00 #3 X 4 LINK CHAIN 8A079 8A06 E " 90 8A048A " SWVL CPLNG 8X0 /4" LN 8S3038 CVR PLT PN 8A009 8A004 8A048A 8A079 8A087 8A03 8A06 8A38 " CAP 8A38 8A400 8L0306 8L090 8S00 8S300 8S3038 8X004 8X0 8L0306 CAPLUG 8L090 (05" ALUM) 8L093 (05" SS) 8L73/SS WET BM PKG 0' PRT3 ULTRA 6/8/0 8L73/AL WET BM PKG 0' PRT3 ULTRA QTY 4 6.7'

149 6' 8" PART EXTENSION WET BOOM PACKAGES 66'8", 76'8", 86'8", 96'8", 06'8" ULTIMATE 8A048 " CPLG PN 8A048 8L0306 8L0908 8S300 8S3038 8X004 8X0 8X004 /4 X 3" 8S300 8L /8" AL 8L0908S 4-3/8" SS 8L0306 CAPLUG 8S3038 CVR PLT 8X0 /4" LN 8L706/SS WET BM PKG 6'8" EXT ULT 6/8/0 8L706/AL WET BM PKG 6'8" EXT ULT QTY

150 3' 4" PART EXTENSION WET BOOM PACKAGES 63'4", 73' 4", 83'4", 93'4", 03'4" ULTIMATE PN 8A048 8L0306 8L0906 8S300 8S3038 8X004 8A048 " CPLG 8X0 8X004 /4 X 3" 8S300 8L0906-3/8" AL 8L0903-3/8" SS 8L0306 CAPLUG 8S3038 CVR PLT 8X0 /4" LN 8L703/SS WET BM PKG 3'4" EXT ULT 6/8/0 8L703/AL WET BM PKG 3'4" EXT ULT QTY

151 8X030 8X030 8X00 8L4984 8L487* 8X08 8X099 8X066 8L0400 S58 8X03 8X078 8X065 8X0 8G800 8L4987 8X033 8X0047 8F80 8A4030 8L498 8F80 8X033 8X034 *LATCH KIT USED ON 70' THROUGH 0' ONLY S56 8L660 60' 8L663 63' 8L666 66' *8L670 70' *8L673 73' *8L676 76' *8L680 80' *8L683 83' *8L686 86' *8L690 90' *8L693 93' *8L696 96' *8L ' *8L ' *8L ' *8L630 0' //00 8L660/ WINDSHIELD PACKAGES - ULTIMATE 8.80

152 8.8

153 8F9754 8A54 E "FLNGX.5"HB 8A008.5" HC 8A405.5" X 36" HOSE 50PSI 8A40 GSKT 8A35 REDUCER 8A405 -/4" X " GSKT 8A008.5" HC 8A54 E "FLNGX.5"HB 8A33 " FLNG CLMP 8A40 GSKT CHEMICAL EDUCTOR PACKAGE PN QTY 8A00 8A006 8A008 8A40 3 8A405 8A40 8A06 8A5 8A33 3 8A34 8A54 8A9 8A35 8A354 8X003 3/8" FN 8X000 3/8 X 3/4" 8S497 BRKT ASSEMBLY 8A405 8A406 8A408 8A4048 8C760 8F9754 8S0006 8S497 3' 4' 3' 8A33 " FLNG CLMP 8A34 " CLMP 8X003 3/8" FN 8C760 3/4 X 8-/6 X 6" 8X000 8X003 8X060 8X0306 8X36 8Z Z056 8S0006 BRKT 8A354 " FLNG BV 8A33 " FLNG CLMP 8A40 GSKT 8A405 -/4" X " GSKT 8A34 " CLMP 8X000 3/8 X 3/4" 8A9 8A006.5" HC 8A406.5" X 68" HOSE 00PSI 8X060 3/4" N 8A006.5" HC 8A408 " X 36" HOSE 00PSI 8X0306 3/4" LW 8A5.5X" MPT E 8A40 " BH 8A06 "HB X "MPT 8A00 " HC 09/05/03 8S999/ CHEMICAL INDUCTR PKG ULT/RA 8.8

154 CROSS OVER PLUMBING PACKAGE 3" COMMON PN QTY 8A00 8A40 4 8A4 8A33 4 8A35 8A56 8A6 8A96 8A33 MOVE FROM 4 WAY CROSS AND INSTALL ON TOP OF TEE ON CROSS OVER PLUMBING KIT. TO 3 WAY TEE ON SUCTION SIDE OF PUMP. WOULD BE ST TEE ON 3" HOSE COMING FROM TANK. 8A35 FC 300 8A354 8A4048 8Z0530 8A4 3" GSKT 8A33 " PLUG 8A33 " FLNG CLMP 8A40 GSKT8A96 " FLNG T 8A40 GSKT 8A33 " FLNG CLMP 8A4048 " TIE 8Z0530 MN TANK PMP FILL TAG 8A00 " HC 8A40 GSKT 8A408 (33") 8A6 90 " X 300 FE 8A33 " FLNG CLMP 8A354 " FLNG BV 8A33 " FLNG CLMP 8A40 GSKT 8A56 "X" HB, E 8A00 " HC 9/4/03 8S9939.iam/CROSS OVER PLUMBING PACKAGE 3" COMMON 8.83

155 RINSE NOZ MN TANK W/O RINSE TANK 8A05 3/4" HB E PN 8A007 8A400 8A005G 8A0 QTY 4 8Z058 TANK NOZZLE TAG 8A405 TIE 8A400 8A007 3/4" HC 8A05 8A3 8A38 8A84 8A38 8A34 8A A007 3/4" HC 8A400 3/4" BH 8A400 8A4048 8A405 8F30 6' 4 8A4048 " TIE 8A38 GASKET 8A3 " CLAMP 8A350 " BV 8A007 3/4" HC 8A3 " CLAMP 8A38 GASKET 8A400 8A84 " FLNG X 3/4" HB 8A005G 3/4"MPT X () 3/4"HB TEE 8A400 3/4" BH 8A0 3/4"X4" NPL 8F30 "FPT SPRAY NOZ 8A0 3/4"X4" NPL 8F30 "FPT SPRAY NOZ 8Z058 8A38 " E 8A34 "X" REDUCER *CENTER ONE 8A400 BULKHEAD IN TOP OF TANK 8" BEHIND CENTER TANK HOOP AND ON AHEAD OF FILL WELL SLIGHTLY RIGHT OF CENTER. /0/008 8S9956/ RINSE NOZ MN TANK W/O RINS TNK 8.84

156 WASH WAND PACKAGE WO / TANK 8F87 8X0306 3/4" LW 8X060 3/4" N 8F879 /"MXF SWVL CONN 8F39 /"HB X /" MPT BR 8L3374 8C760 3/4 X 8 X 6" 8A006 /"HB X 3/4"MPT 8A3 " CLAMP 8A003 /" HC 8A3 " CLAMP 8A38 GASKET 8A350 " BV 8A340 8A38 GASKET 8A38 " E 8A38 GASKET 8A3 " CLAMP 8A34 "X" REDUCER PN 8A003 8A006 8A3 8A38 8A38 8A34 8A340 8A350 8A4008 8A4048 8A405 8C760 8D0350 8F39 8F87 8F879 8G0007 8L3374 8X060 8X0306 8Z050 QTY ' A003 /" HC 8A4008 8X060 3/4" N 8A4048 " TIE 8G0007 8X0306 3/4" LW 8D0350 3/4"X4"X0" 8A405 TIE 8Z050 RINSE WAND TAG //008 8S9954A/WASH WAND PKG WO/RINS TANK 8.85

157 MANUAL END NOZZLE 8F389 8F360 8F398A 8A 8A40A 8F390 3/9/05 8F390.iam/ MANUAL END NOZZLE 8.86

158 8A004 " T 8A40A " THREADED PIPE (CUT TO LENGTH) 8F390 8L904 8A07 8F395 /4"NPT NPL PN QTY S0-4" 8A 8A07 8A004 8A40A 8F360 8F389 8A4048 " TIE 8F395 8F390 8F360 8A 8F389 0/7/0 8F3903.iam/ULTIMATE SNGL ELEC ENDNOZ

159 8A40A 8F390 8A07 8L90 8F395 /4"NPT NPL 8A PN QTY 8A 8A07 8A40A 8F360 8F389 8F395 8F390 8A4048 " TIE 8F360 8F389 0/7/0 8F3904.iam/ULTRA SNGL ELEC END NZZL

160 8.89

161 8.90

162 8.9

163 8.9

164 8.93

165 8.94

166 8.95

167 8.96

168 All 9303C and 9303S Series Pumps A Drain/Vent Plug (9303C) Drain/Vent Plug (9303S) C Pump Casing (Model 9303C) S Pump Casing (Model 9303S) A C Pump Casing (Universal Flange) Impeller Nut (9303C) Impeller Nut (Model 9303S) P Impeller (Nyglass, std.)(9303c) P Impeller (Optional Polypropylene) (Std 9303S) O-ring Rubber Gasket (9303C) Mechanical Seal (Viton) (Std 9303C) Mechanical Seal (Silicon Carbide) (Std 9303S) C Mounting Flange S Mounting Flange (Model 9303S) Hex Head Cap Screw (9303C) Hex Head Cap Screw (Model 9303S) Slinger Ring Retaining Ring Snap Ring Ball Bearing Spacer Shaft Seal Seal Spacer Thrust Bearing Assembly Consists of: () Thrust Bearing & () Thrust Brg. Races Snap Ring Shaft (HMC & HM4C Models) 6-3/4" Long Shaft (HMC & HM5C Models) 7" Long Shaft (HM3C Models) 7 -/" Long C Motor Body (Includes Main Bearing) Hex Head Cap Screw O-ring C Gerotor Housing (HMC Models) /4" Wide 6 Repair Parts Kit No Contains: One o-ring (Ref. 5), one rubber gasket (Ref. 6), and one mechanical seal (Ref. 7). 3 Source: Form # L-035C (0/05) Silicon Seal Kit No Contains one each: o-ring (Ref. 5) and one mechanical seal (silicon carbide) (Ref.7). Ref. Qty. Part No. Req'd. No. Description Adapter Kit No (HM and HM4 Models Only): Contains one each: No Pressure Port Adapter No (Size #) No (Size #) No (Size #3). No Adapter O-ring and No Orifice O-ring (Qty 3). Ref. Qty. Part NOTE: When ordering parts, give QUANTITY, PART NUMBER, DESCRIPTION, and COMPLETE MODEL NUMBER. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers. Parts Kit No Contains: One each ball bearing (Ref. 3), motor shaft seal (Ref. 5), thread seal gasket (Ref. 36), and washer (Ref. 37); two each motor housing o-rings (Ref. ), and port adapter o-rings (Ref. 30). Hydraulic Motor Part Nos C (HMC Models) C (HMC Models) C (HM3C Models) C (HM4C Models) C (HM5C Models) No. Req'd. No. Description C Gerotor Housing (HMC Models) /" Wide C Gerotor Housing (HM4C Models) 5/6" Wide C Gerotor Housing (HM3C Models) " Wide C Gerotor Housing (HM5C Models) 5/8" Wide Dowel Pin (HMC & HM4C Models) Dowel Pin (HMC & HM5CModels) Dowel Pin (HM3C Models) Dowel Pin (HMC & HM4C Models) Dowel Pin (HMC & HM5C Models) Dowel Pin (HM3C Models) Gerotor (HMC Models) Gerotor (HMC Models) Gerotor (HM3C Models) Gerotor (HM4C Models) Gerotor (HM5C Models) C Motor End Plate (Includes Main Bearing) Washer Cap Screw (HMC & HM4C Models) Cap Screw (HMC) Cap Screw (HM3C Models) Cap Screw (HM5C) O-ring Pressure Port Adapter Poppet Retaining Ring Tank Port Adapter Bypass Adjusting Screw Gasket Washer Lock Nut Roll Pin (HMC & HM4C Models) Roll Pin (HMC & HM5C Models) Roll Pin (HM3C) Woodruff Key (9303C) S.S. Woodruff Key (Model 9303S)

169 SECTION 8 - PARTS 8.98

170 HUB AND AXLE COMPONENTS Assembly Notes: A. Before towing machine, pack wheel bearings and fill / of hub cavity with high quality bearing grease. B. Tighten axle nut to 50 ft.-lbs, loosen nut until first slot is aligned with hole in axle, install cotter pin and bend to retain. Legend: SMC Part Number INDUSTRY Part Number or Size HUB. SEAL. INNER BEARING 3. INNER RACE 4. OUTER RACE 5. HUB ASSY 6. WHEEL STUD 7. WHEEL NUT 8. WHEEL BOLT 9. HUB ZERK 0. OUTER BEARING. AXLE WASHER. AXLE NUT 3. COTTER PIN 4. HUB CAP GASKET 5. HUB CAP 6. HUB CAP BOLT 8G80 8G87 8G830 8G830 8G8 8D54 8X0708 8G87 8D59 8D5 8X040 8G83 N/A H N/A N/A N/A SE0 L L4460 L4460 HDA WB0 /4-8NF L /4" I.D. 3/4"-6 3/6X" DC H57 H6 8D534 8D536 8D538 8D57 8D533 8D5336 8D50 8D55 8D54 8X0708 8D57 8D59 8D5 8X045 8D53 N/A N/A N/A LM48548 LM4850 LM6700 H57 WB6 /-0UNF /4-8NF LM /8" I.D. 7/8"-4 3/6X-/" DC3 8D5 8D537 8D5334 8D5336 8D D SE3 LM9749 LM970 LM6700 H6 N/A N/A 8D54 WB0-09 8X0708 8D57 8D539 8D53 8X045 8D53 8R694 WB 0- /4-8NF LM67048 " I.D. "-4 3/6X-/" DC3 N/A N/A H64 8R69** 8R697 8R695 8D533 8R69 8R694 8X0708 8D57 8D539 8D53 8X045 8R693 N/A N/A N/A SEE GBGI INSTRUCTIONS LM LM6030 LM4850 H64 WB /4-8NF LM48548 " I.D. "-4 3/6X-/" DC5 N/A HD8 8K77*** SEAL SE77 8K78*** SLEEVE SE77-8K77 LM3780 8K730 LM370 8K73 LM70 8K7 HD8 8K75-9/6"* 8K76-9/6"* 8K7-5/8" 8K73-5/8" WB4 WB40 WB46 WB8 N/A 8X0708 /4-8NF 8K78 LM790 8D539 " I.D. 8D53 "-4 8X045 3/6X-/" N/A 8K73 DC7 N/A HD87 8K7344 7K734 8K7346 8K7347 8K7340 8K7-5/8" 8K73-5/8" N/A 8X0708 8K7343 8X038 8D534 8X044 N/A 8K734 N/A SE4 LM387AS 38A LM5030 HD87 WB46 WB8 /4-8NF LM I.D. -/4"- /4X" DC6 H00 LT 8K70 7K77 8K730 8K73 8K7 8K75 8K76 N/A 8X0708 8K78 8X038 8D534 8X044 8K7 8K73 8K74 SE A H00-9 WB5 WB5 /4-8NF I.D. -/4"- /4X" SE49 DC7 WB53 H00 HVY 8K7 8K79 8K73 8K73 8K70 8K75 8K76 N/A 8X0708 8K78 8X038 8D534 8X044 8K7 8K73 8K74 SE A H00- WB5 WB5 /4-8NF I.D. -/4"- /4X" SE49 DC7 WB53 H00 8K730 8K737 8K7330 8K733 8K709 8K75 8K76 N/A 8X0708 8K738 8X0366 8D538 8X048 8K73 8K733 8K74 SE55 HM848 HM80 HM00 HDA00 WB5 WB5 /4-8NF HM049.03" ID " - WB65 5/6 X -/" SE59 DC8 WB53 * Pre 000 ** GBGI (Not Shown), 8R69 Triple Lip (Shown) CD\MANUALS\0-6 HUB-AXLE COMPONENTS LAST REVISION: /7/0 *** Pre 006 8K70 (SE7) 8.99

171 SECTION 8 - PARTS SMC PART # 8A600A 8A600B 8A40 8A33A 8A33 8A600C 8A600D 8A600E 8.00

172 RFM 60 P FLOWMETER REPLACEMENT PARTS ITEM DESCRIPTION RAVEN PART # Body, RFM 60 P Flowmeter Rotor/Magnet Assembly Hub/Bearing Assy, Upstream Hub assembly, Downstream Ring, Retaining, Internal Stud Bearing Clamp, Cable Screw, Thread Forming Sensor, assembly, External

173 Stock # Description Stock # Description S56 POLY 6 WIDE PER/FT 8A0868 O-RING HYPRO GEAR CASING S58 PERFORATED POLY 8 WIDE PER/FT 8A0900 DRAIN/VENT PLUG 7L035 STIFFENER 3 RDPT A0903 PUMP CASTING BODY 0X00FLNGD 7L035A STIFFENER 3 RDPT A0904 IMPELLER NUT 7L0360 STL 4.3X8X0GA BOOM GST 8A0906 IMPELLER HM-4 7L50 STL / X 7-/ OD X -9/6 ID 8A0907 MOUNTING FLANGE 7L795 RND CR.65X /8 8A0908 SLINGER RING 7L797 RND CR.65X.35--3/8 W/ZRK 8A09 WOODRUFF KEY 7L88 TUBE.875X.75 ID A094 SCREW HEX HEAD CAP 7L98 SHAFT.5 X 45 YZ PLT 99-8A09 RETAINING RING 7L99 SHAFT.5 X 49.3 YZ PLT 05-8A094 SNAP RING 7L345 PIN PART BOOM HINGE ULTIMATE 8A098 SPACER -0 7L346 PIN PART 3 BOOM HINGE ULTRA 8A0930A SHAFT SEAL REPAIR KIT HM-4 7L347 PIN PART BOOM HINGE ULTRA 8A093 THRUST BEARING ASSEMBLY 7L390 STL /4 STIFFNR FLAT - 8A0934 SNAP RING 7S4698 LXX3/8 W/HLS LTCH ANGLBRKT 8A0938 ROLL PIN HM4 8A06 HOOP REAR 000 GAL NARROW P/C 8A0939 ROLL PIN HM & HM5 8A030 HOOP 000GAL CRPCARE P/C 03-8A096 SCREW BYPASS ADJUSTING 8A048 HOOP REAR 650 NRRW PTD - 8A0968 LOCK NUT 8A050 HOOP 500GAL CRPCARE P/C 03-8A000 CLAMP HOSE /4 MINI 8A05 HOOP 650GAL CRPCARE P/C 0-8A00 CLAMP HOSE #36 8A054 AXIAL TANK SPRT TUBE P/C 03-8A003 CLAMP HOSE / MINI 8A058 HOOP 650 NRW CRPCR PTD - 8A004 CLAMP HOSE 5 #7 8A060 SPACER 000 NRRW TNK HP.5 8A005 CLAMP HOSE 4 #60 8A06 SPACER 500 NRRW TNK HP 3.5 8A006 CLAMP HOSE -/ #4 8A064 SPACER 500 NRRW TNK HP A007 CLAMP HOSE 3/4 # 8A0804 IMPELLER (PLASTIC) 8A008 CLAMP HOSE -/4 #0 8A0805 IMPELLER 55 HYPRO PUMP 8A009 CLAMP HOSE #6 8A0806 MECHANICAL SEAL VITON 8A07 CLAMP HOSE SIZE J A0809 GASKET 55 HYPRO PUMP 8A04 CHECK VLV ASSY TNK 3/4X6ORB 8A080 BEARING RETAINER RING 8A044 PORT ADAPTER HYPRO PUMP 8A08 O-RING HYPRO 55 PUMP 8A046 O-RING (BUNA-N) HM-4/PTO 8A08 BALL BEARING 8A047 MECHANICAL SEAL (VITON) HM-4 8A083 SEAL VITON 55 HYPRO PUMP 8A048 MECHANICAL SEAL SILICON CARBID 8A084 RETAINING RING 8A050 C RPM CENT PUMP VITON 8A086 LIP SEAL BEARING 9006C/9008C 8A05 C RPM CENT PUMP VITON 8A080 THRUSTWASHER 8A RPM 8-SPLN PTO VITON 8A08 BEARING INNER RACE 8A BLT DRV 000RPM PTO PUMP 8A084 DRIVER GEAR W/BEARING 9006C 8A056A 9303C-HMC FLGD HYDPMP W/DRAIN 8A086 DRIVER GEAR W/BEARING 9008C 8A056F 9303C-HMC FLNGD HYDPMP -4 8A088 OIL SEAL DRIVER 9006C/9008C 8A S-HMC CNTRFGL PUMP HYDDRV 8A0830 SHAFT PINION GEARED IMPELLER 8A C-HM3C CNTRFGL PUMP HYDDRV 8A0834 SUN GEAR 8A06F 9303C-HM4C CNTRFGL FLGD HYDPMP 8A0836 RETAINING RING(FOR SUN GEAR) 8A C-HM5C CNTRFGL FLGD HYDPMP 8A0838 DRIVER HUB 9006C 8A SCREEN 50 MESH DRIPLESS 8A0840 DRIVER HUB 9008C 8A55 U-BOLT 3/8 X 6-/6 X 5 SQ 8A084 DRIVER HUB 9008C 8SPLINE 08-8A56 U-BOLT 3/8 X 4-/6 X 5 SQ 8A0847 RETAINING RING 8A57 U-BOLT 3/8 X 4-/6 X 7 SQ 8A0848 BALL BEARING 8A78 MOUNTING CLIP HYPRO PTO PUMP 8A0850 SLINGER 8A80 LOCKING COLLAR KIT PTO PUMP 8A085 RETAINING RING 8A90 ELEC END NOZZLE COIL WP 8A0854 RING GEAR 8A9 ELEC END NOZZLE SPRING 8A0856 CUSHION BUMPER 8A9 ELEC END NOZZLE PLUNGR VITON 8A086 IMPELLER 538 HYPRO PUMP 8A93 ELEC END NOZZLE VITON O-RING 8A086 GASKET 538 HYPRO PUMP IMPELR 8A0864 BOLT SEAL HYPRO 538 PUMP 8A0865 BOLT HYPRO 538 FLANGE-CASING 8A0867 BEARING SHIELD HYPRO A94 ELEC END NOZZLE VALVE BODY 8A98A BODY ELEC BALL VALVE MANIFLD 8A00 DIRECTOVALVE SPRAY SYSTM 44 8A03F FUSE HOLDER W/FUSE CLIPS

174 Stock # Description Stock # Description 8A04 VALVE ELECTRIC BALL 8A04A TEEJET ELEC MOTOR FILTER W/RES 8A05 MOTOR ONLY 344 BVLVE RPM 8A07 VALVE END NOZZLE SOLENOID 8A08B INNER CONNECTOR BVALV MANIFLD 8A08C 0-RING BODY TO BODY BVLV MANIF 8A50 BALL VALVE 3/4 UNION 8A5 BALL VALVE 3WAY BOTTMLOAD 8A55B BALL VALVE FPT BOLTED 8A57 BALL VALVE.5 3WAY BOTMLOAD 8A58 END CAP.5 UVBANJO-00 8A60 STRAINER -T THREADED W/00M 8A6 BODY -T STRAINER THREADED 8A6 SCREEN 80 MESH HD -T THREADD 8A6B SCREEN 00 MESH HD -T THRDD 8A63 GASKET VITON /.5/.5 THRDD 8A65 BOWL BLACK /.5/.5 THRDD 8A69 REG VALVE POLY FLNGD 360DEG 8A7 JET AGITATOR 3/4 MPT BLUE 8A73 JET AGITATOR 3/4 MPT HYPRO 8A74 CONSOLE ONLY RAVEN SCS-05 8A79C HOOKUP CABLE 05 3-WIRE 8A8 GAUGE LINE FITTING /4 MPT 8A8B GAUGE LINE FITTING /4 FPT 8A8 GAUGE LINE UNION RAVEN 8A85 CABLE EXT MECH 05 RAVEN 8A86 GAUGE ONLY RVN SCS-05 00PSI 8A86R O-RING RVN SCS-05 LIQUID GAGE 8A87 GAUGE ONLY RAVEN SCS-03 8A97 MNT BRCKT RAVEN SCS-05 8A99B PRESSURE GAUGE 0-00 PSI GLY 8A300A PRESSURE GAUGE 0-00PSI 4 GLY 8A30 PRSSR CG 0-00PSICLY PNLMNT 4 8A309 TANK CLEAN HO W/TOP BIN 95-8A3 TANK 70 GAL SDMNT YEL PLY W/SM 8A3A 8 PROCAP TANK LID 8A3G TANK 70 GAL SDMNT GRY PLY W/SM 8A33 TANK 50GAL POLY YELW/SUMP ACE 8A35 TANK 00 GAL POLY RINSE -08 8A35A TANK 00GL POLYYLW/SMP ACE 08-8A35 TANK 500 GAL 48 RND 3 PNT 8A38 TANK 500 GAL ELLIPTICAL PNT 8A39 TANK 750 GAL ELLIPTICAL PNT 8A33 TANK 000GAL CROPCARE A33N TANK NARROW 000 GAL CROPCARE 8A33NG TANK NARROW 000 CROPCARE GRY 8A33T TANK TAPERED 000 GAL CROPCARE 8A33TG TANK TAPERED 000 CROPCARE GRY 8A33 TANK 000 GAL ELLIPTICAL -0 8A333 TANK 500 GAL WILGER A334 TANK TAPERED 500 GAL CROPCARE 8A334G TANK TAPERED 500 CROPCARE GRY 8A335 TANK NARROW 500 GAL CROPCARE 8A335G TANK NARROW 500 CROPCARE GRY 8A335N TANK NARROW 650 GAL CROPCARE 8A335NG TANK NARROW 650 CROPCARE GRY 8A336 TANK TAPERED 650GAL CROPCARE 8A336G TANK TAPERED 650 CROPCARE GRY 9. 8A337B COVER 0 W/VENT 8A337C VENT 0 8A337D FILLWELL RING 0 8A338 COVER W/VENT & RING 08-8A346 STRAINER BASKET 6 8A400 BANJO 3/4 FITTING COMPLETE 8A40 FLANGE GASKET M00 EPDM 8A404 BANJO -/4 FITTING COMPLETE 8A405 FLANGE GASKET M0 EPDM 8A40 BANJO FITTING COMPLETE 8A4 FLANGE GASKET M300 EPDM 8A43 BANJO ANTI-VORTEX NO SCREEN 8A44 BANJO 3 FITTING COMPLETE 8A445 SEAL 6 ARAG HINGED COVER 8A445A SEAL ARAG HINGED COVER 8A446 6 HINGD CVR LESS HANDL HYPRO 8A447 6 HINGED LID COMPLETE 8A447A O-RING FOR ARAG ARM 8A447B ARM RED 6 ARAG HINGED COVER 8A447C FLYNUT ARAG 8A447D ARM RED ARAG COVER 8A447E BAFFLE 6 ARAG HINGED COVER 8A448 RING 6 HINGD FILLWELL HYPRO 8A450 PIN HINGED COVER 8A45 HANDLE (BANJO) BLTD BV03-8A45 STEM (BANJO) BLTD BV 03-8A453 BODY (BANJO) BLTD BV 03-8A455 VALVE KIT (BANJO) BLTDBV03-8A456 STEM O-RING (BANJO) 03-8A457 VLV BALL(BANJO) BLTDBV03-8A458 BDY ORING BANJO BLTDBV03-8A460 HANDLE (BANJO)3/4& 3W BV98-8A46 BODY (BANJO) 3/4 3WAY BV98-8A464 BLLSEAT(BANJO)3/4& 3W BV98-8A467 BODY (BANJO) 3/4 BLTD BV98-8A469 VLV KIT(BANJO)3/4 BLTD BV98-8A47 BODY (BANJO) 3-WAY BV98-8A479 SPARE PARTS KIT BLTD BV95-8A480 HANDLE (BANJO)-/4 3W BV98-8A48 BODY (BANJO) -/4 3W BV98-8A483 END CAP(BANJO)-/4 3W BV98-8A494 HANDLE (BANJO) 3 3-WAY BV4-8A495 HANDLE (BANJO) 3-WAY BV98-8A496 STEM (BANJO) 3-WAY BV98-8A497 BODY (BANJO) 3-WAY BV98-8A499 BLLSEAT(BANJO) 3-WAY BV98-8A50 BODY (BANJO) BLTD BV 8A503 END CAP(BANJO) BLTD BV 8A504 VLV KIT(BANJO) BLTD BV 8A600 VALVE ELEC BOOM FLNGD RAVEN 8A600A MOTOR ASSY RAVEN MANIFOLD VLV 8A600B BODY RAVEN MANIFOLD VLV 8A600C O-RING RAVEN MANIFOLD VLV OTLT 8A600D OUTLET RAVEN MANIFOLD VLV 8A600E SEAT KIT RAVEN MANIFOLD VLV 8A60 RAVEN TRPL BM VALVE W/CON 8A60 RAVEN FIVE BM VALVE W/CON 8A79 MOUNTING BRCKT BALL VLV 90

175 Stock # Description Stock # Description 8A733 HANDLE(BANJO) BLTD BV 8A735 BALL VALVE 3WAY SIDELOAD 8A738 BALL VALVE 3 BTTM LD BLD 8A740 BALL VALVE 3 STUBBY 8A74 BALL VALVE 3 STUBBY DBLFLNG 8A75 COUPLER CAMLOCK X HB 8A753 COUPLER CAMLOCK X 90*HB 8A756 ADAPTER CAMLOCK X MPT 8A757 ADAPTER CAMLOCK X FPT 8A760 CAP COUPLER CAMLOCK 8A76 CAP COUPLER 3 CAMLOCK 8A765 3 FEMALE CPLR MALE ADPTR 8A83 SPEED SENSOR EXTENSION 4 8A85 GPS SPEED SENSOR 4 HERTZ 8A88 GEARTOOTH SPEED SENSOR RAVEN 8A89 CABLE GPS SPEED RS3 9PIN 3 8A830 REG VALVE POLY FLANGED 8A83 REG VALVE.5 POLY FLANGED 8A846 FLOWMETER 60GPM POLY 8A847 SENSOR ASSY EXTRNL 60P FLWMTR 8A848 FLOWMETER 00GPM POLY 8A89 ISO-BODY KIT 8A893 ISO-BODY KIT -/ 8A904 NORTH MAGNET ASSY RED 8A905 SOUTH MAGNET ASSY BLACK 8A94 SWITCH ASSY MAGNET RAVEN 8A90 SWITCH BOOM 03/05 8A9 SWITCH MASTER 03/05 8A93 SWITCH MASTER 440/450 8A94 SWITCH BOOM 450 ONLY 8A95 SWITCH POWER 440/450 8A96 SWITCH MAN/AUTO 440/450 8A98 SWITCH PRESSURE ADJUST 03/05 8A99 SWITCH PRESSURE ADJUST 440/450 8A930 MOUNTING BRACKET 4400/VIPER 8A93 MOUNTING BRACKET 440/450 8A93 KNOB 03/05 8A933 KNOB 440/450 8A934 KNOB TIPLFT TRUCKSPRYR - 8A935 FUSE HOLDER 440/450 8A94 FUSE AGC 0 AMP 8A949 CABLE FLOWMETER/PRESSURE 6 8A954 TUBING GAGE LINE /4 OD PER FT 8A964 OUTER CASE SCS-05 8A000 NIPPLE -/4 8A00 NIPPLE 8A00B BUSHING X / 8A003 NIPPLE 3/4 8A004 TEE 8A005G TEE 3/4 MPT X 3/4 HB X 3/4 HB 8A006 BARB HOSE / X 3/4 MPT 8A007 BARB HOSE 3/4 X 3/4 MPT 8A008 STREET ELBOW 3/4 8A009 ELBOW 3/4 HB X 3/4 FPT 8A00 ELBOW / HB X 3/4 FPT 8A0 NIPPLE 3/4 X 4 8A03B PLUG 8A05 ELBOW 3/4 HB X 3/4 MPT 9.3 8A07 ELBOW HB X 3/4 MPT 8A08 TEE 3/4 MPT X HB X HB A&M 8A00 TEE.5HBX.5HBX.5HB A&M 8A0 ELBOW 3/4 HB X MPT 8A05 BARB HOSE X MPT 8A03 BARB HOSE -/4 X -/4 MPT 8A03 STREET ELBOW 8A033 AGITATOR TEE 99-8A033B AGITATOR TEE EXTENSION 8A037 BARB HOSE X 3/4 MPT 8A039 TEE -/4 8A043 PLUG /4 (A&M) 8A045 PLUG -/4 8A047 REDUCING COUPLING X 3/4 8A048 PIPE COUPLING 8A048A PIPE COUPLING SWIVEL 99-8A048B PIPE COUPLING.5 8A048C PIPE COUPLING.5 8A049 PIPE COUPLING SS 96-8A05 NIPPLE 8A053 STREET ELBOW -/4 8A058 BUSHING X -/ 8A059 STREET ELBOW 45*X 8A060 BARB HOSE -/ 8A06 BARB HOSE 8A063 STREET ELBOW 45*X 3 8A066 BARB HOSE -/4 X MPT 8A079 PLUG ADAPTER CAMLOCK 8A084 COUPLER 3/4 CAMLOCK X 3/4 MPT 8A085 GASKET 3/4 COUPLER 8A086 ADAPTER 3/4 CAMLOCK X 3/4 MPT 8A087 COUPLER CAMLOCK X MPT 8A088X GASKET CAMLOCK COUPLER 8A093 COUPLER CAMLOCK X FPT 8A095 COUPLER.5 CAMLOCKX.5 90*HB 8A098 ADAPTER.5 CAMLOCK X.5 FPT 8A03 BARB HOSE 3/4 X MPT 8A06 ELBOW 90* 8A0 ELBOW HB X MPT 8A ELBOW -/4 HB X -/4 MPT 8A4 ELBOW -/ HB X -/ MPT 8A5 ELBOW -/ HB X MPT 8A6 ELBOW HB X MPT 8A7 MENDER HOSE /4 8A MENDER HOSE 3/4 8A3 MENDER HOSE ELBOW 3/4 (A&M) 8A4 MENDER HOSE 8A7 TEE HOSE BARB 3/4 8A8 REDUCING NIPPLE X 3/4 8A30 REDUCING NIPPLE -/4 X 8A3 REDUCING NIPPLE -/ X 8A3 REDUCING NIPPLE -/ X -/4 8A35 REDUCING NIPPLE X -/ 8A37 PIPE CAP 3/4 FPT 8A38 PIPE CAP FPT 8A40 PIPE CAP FPT + /4 MPT 8A40A PIPE CAP AL FPTX/4MPT 8A5 EXPRSS CLAMP, HRDWR, & O-RINGS

176 Stock # Description Stock # Description 8A54 EXPRSS END BODY W/PLUG 8A56 EXPRSS UNVRSL FLNG STRT 8A58 EXPRSS HB STRAIGHT 8A60 EXPRSS HB ELBOW 8A6 EXPRSS MALE CAM LOCK 8A03 RAVEN SCS-05 CONTROL L/VALV 8A8 FLANGE GASKET DRAIN M00 EPDM 8A9 FLANGE FOOT GSKT M00EDPM 8A0 FITTING.5X.5 POLY BTMDRAIN 8A4 FLANGE DRAIN MBF00 BOTTOMTANK 8A6 FLANGE DRAIN MBF300 BOTTOMTANK 8A3 FLANGE CLAMP FC00 WORM SCREW 8A33 FLANGE CLAMP FC00 WORMSCRW 5 8A34 FLANGE CLAMP FC0 WORMSCRW 56 8A35 FLANGE CLAMP FC300 WORM SCREW 8A38 FLANGE GASKET M00 EPDM 8A49 FLANGE ELBOW 45 M300 X 3 HB 8A50 FLANGE ELBOW 90 M00 X 3/4 HB 8A5 FLANGE ELBOW 90 M00 X HB 8A53 FLANGE ELBOW 90 M00 X HB 8A54 FLANGE ELBOW 90 M00 X.5 HB 8A55 FLANGE ELBOW 90M00X.5 HB 8A56 FLANGE ELBOW 90 M00 X HB 8A57 FLANGE ELBOW 90 M0 X.5 HB 8A58 FLANGE ELBOW 90 M0 X HB 8A59 FLNG ELBOW 0BRB SWP A60 FLANGE ELBOW 90 M300 X 3 HB 8A6 FLNG ELBOW 300BRB SWP A6 FLANGE ELBOW 90M300X HB 8A69 FLANGE M00 X -/4 MPT SS 8A7 FLANGE M00 X -/ MPT SS 8A84 FLANGE M00 X 3/4 HB 8A85 FLANGE M00 X HB 8A88 FLANGE M00 X -/4 HB 8A89 FLANGE M00 X -/ HB 8A90 FLANGE M00 X HB 8A9 FLANGE M0 X HB FULL PORT 8A9 FLANGE M0 X.5 HB 8A93 FLANGE M300 X 3 HB FULL PORT 8A94 FLANGE TEE M00 8A95 FLANGE TEE M00 X M00 X M00 8A96 FLANGE TEE M00 8A97 FLANGE TEE M0 FULL PORT 8A98 FLANGE TEE M0 X M0 X M00 8A300 STRAINER Y FLANGE W/00MESH 8A300A CAP FLANGE Y-STRAINER 8A300B GASKET FLANGE Y-STRAINER 8A300C BODY FLANGE Y-STRAINER 8A300D O-RING STRAINER DRN PLG.5-8A300E O-RING STRAINER SCREN.5-8A30A SCREEN 0 MESH FLNGD Y STRNR 8A303 SCREEN 50 MESH RED FLNGD Y 8A304 SCREEN 00 MESH GREEN FLNGD Y 8A308 STRAINER -T FLNGD W/00 MESH 8A308D HEAD -T FLNGD STRNR TJET 04-8A308E GASKET T FLNG STRNR TJET 04-8A308F BOWL -T FLNGD STRNR TJET 04-8A308G GASKET -T FLNG STRNR TJET A308H CAP -T FLNGD STRNR TJET 04-8A309 SCREEN 00 MESH GREEN FLNGD T 8A30 SCREEN 50 MESH RED FLNGD T 8A3 FLANGE CROSS M00 8A34 FLANGE CROSS M0 FULL PORT 8A36 FLANGE CROSS M300 8A37 FLANGE ELBOW 45 M0 8A37A FLANGE ELBOW 45 M300 8A38 FLANGE ELBOW 90 M00 8A39 FLNG ELBOW 0FP SWP A30 FLANGE ELBOW 90 M0 FULL PORT 8A3 FLANGE ELBOW 90 SHORT M00 8A3A FLANGE ELBOW 90 SWEEP M00 8A3 FLANGE ELBOW A33 FLANGE SWEEP ELBOW A34 FLANGE REDUCER M00 X M00 8A35 FLANGE REDUCER M0 X M00 8A38 FLANGE REDUCER M300 X M0 8A330 FLANGE PLUG M00 8A33 FLANGE PLUG M00 8A33A FLANGE PLUG M00 W//4 FPT 8A33 FLANGE PLUG M0 FULL PORT 8A333 FLANGE PLUG M300 8A335 FLANGE COUPLING M00 8A336 FLANGE PLUG M00 W/3/4 FPT 8A337 FLANGE COUPLING M0 FULL PORT 8A338 FLANGE COUPLING M0 6 8A339 FLANGE COUPLING M A340 FLANGE M00 X 3/4 FPT 8A34 FLANGE COUPLING M A350 BALL VALVE FLANGE M00 ( ) 8A354 BALL VALVE FLANGE M00 ( ) 8A356 BALL VALVE FLANGE M0 ( FP) 8A367 BALL VLV FLNG3WAY FULLPORT SL 8A370 FLANGE QUICK COUPLER MALE M0 8A37 FLANGE QUICK COUPLER MALE M300 8A50 TEE / MP X / HB CLN LOAD 8A503B BALL VALVE M&F CLN LOAD 0-8A504 GASKET BSP CLN LOAD 8A505 DRAIN HEAD CLN LOAD 8A506 GASKET CLN LOAD 8A507 LOCKING RING CLN LOAD 8A508 BOTTLE RINSE HEAD CLN LOAD -0 8A508A BOTTLE RINSE PLUNGER HYPRO 8A508B BOTTLE RINSE NOZZLE HYPRO 8A509 GASKET CLEAN LOAD -0 8A50 LID CLEAN LOAD TANK -0 8A50A LID HYPRO CLNLOAD TANK 0-8A5 RINSE ASSY TANK CLN LOAD -0 8A5 VALVE / SS CLEAN LOAD 8A53A GASKET FOR PROCAP LID 8A3000 SKID 5GAL MIX&FILLTNK 3PT&SKD 8A300 BAND 5GAL MIX&FILL TNK 8A300 FLOAT 9/6 X SIGHT TUBE 8A4005 HOSE /4 EPDM AG 00PSI BLACK 8A4008 HOSE / EPDM AG 00PSI BLACK 8A400 HOSE 3/4 EPDM AG 00PSI BLACK 8A404 HOSE 3/4 PVC YELLOW 600#SPRAY

177 Stock # Description Stock # Description 8A405 TUBING 3/4 CLEAR VINYL 8A400 HOSE EPDM AG 00PSI BLACK 8A405 HOSE.5 EPDM AG 50PSI BLCK 8A406 HOSE.5 EPDM AG 00PSI BLACK 8A408 HOSE EPDM AG 00PSI BLACK 8A4030 HOSE.5 FERTILIZER 8A403 HOSE.5 FERTILIZER 8A4035 HOSE FERTILIZER 8A4037 HOSE 3 FERTILIZER 8A404 ADHESIVE BACKED CLAMP 5/8 8A4044 CABLE CLAMP BLACK NYLON 7/8 8A4046 ID RUBBER GROMMET.4 OD 8A4048 NYLON TIE.8 X 8A4050 NYLON TIE.30 X 8-7/8 8A405 NYLON TIE.30 X 5.5 8A4054 NYLON TIE.30 X 4 BLK 8A /RADAR INTERFACE DICKEYJOHN 8A47 440/RADAR INTERFACE CASE-IH 8A474 RADAR INTERFACE JD SER 8A476 RADAR INTERFACE JD 30 SERIES 8A4335 CABLE CONSOLE SCS A4336 CABLE CONSOLE SCS A4340 CABLE EXTENSION SCS A4345 CABLE FLOW 6 SCS A4347 CABLE FLOW SCS BOOM 8A4348 CABLE FLOW SCS BOOM 8A4350C VALVE ADVANCE CHIP FOR 450 8A4350P CONSOLE RAVEN SCS-450 GPS97-8A435 CONSOLE RAVEN SCS A4355 TRANSDUCER CABLE 44 8A4356 CONSOLE TO TRANSDUCER CABL 0 8A4358 ELECTRONIC PRESSURE TRANSDUCER 8A4400 SMARTBOOM CONTROLLER PKG - 8A440 SMARTBOOM CABLE KIT A4404 SMARTBOOM CABLE KIT 450-8A447 MOUNTING BRCKT FLOWMETER 8A4480 ULTRAGLIDE CONTROL NODE 8A486 PHOENIX 50 GPS RCVR W/PWR CBL 8C070 SPLITSTEELBUSH.375X ID- 8C0600 BREATHER BRONZE / NPT 8C700 U-BOLT 3/8 X X 4-7/8 SQ 8C70 U-BOLT 3/8 X 8 X 9 SQ 8C78 U-BOLT / X -5/8 X -5/8 SQ 8C70 U-BOLT / X -5/8 X 3-3/4 SQ 8C736 U-BOLT / X 4-/4 X 5-/4 RND 8C740 U-BOLT / X 4-/4 X 7-/4 RND 8C75 U-BOLT 3/4 X 3-/6 X 6 SQ 8C75 U-BOLT 3/4 X 3-/6 X 7-/ SQ 8C755 U-BOLT 3/4 X 6-/6 X 6 SQ 8C760 U-BOLT 3/4 X 8-/6 X 6 SQ 8C780 U-BOLT 7/8 X 8-/6 X 0 SQ 8C900 CLAMP / WIRE ROPE 8D0330 U-BOLT 5/8 X 6-/6 X 5-5/8 SQ 8D0340 U-BOLT 3/4 X 4-/6 X 7-3/4 SQ 8D0350 U-BOLT 3/4 X 4-/6 X 0 SQ 8D070 HITCH PIECE CAST CAT.3CTD PNTD 8D07 PERFECT HTCH BACKSTOP W/HDWE 8D074 CLEVIS OPT.HITCH CAT.3CTD D0730 URETHANE CUSHION PERFCTHTCH 8D0745B HITCH PC WELDD W/BSH CAT.5 4-8D460 SAFETY CHAIN 000# 3/8 X 4 8D470 SAFETY CHAIN 30400# 7/6 X 5 8D350 U-BOLT / X 3 X 7-/4 SQ 8D35 U-BOLT / X 3-3/8 X 7-/4 SQ 8D3 MALE TIP 3/4-6 ORB ISO 8D34 MALE TIP 3/4-6 ORB FLT FACE 8D404 CLAMP CABLE /4 MALLEABLE 84-8D406 THIMBLE CABLE /4 HVYDUTY 84-8D8490 PIONEER/ISO TIP HLDR BNT 97-8D8500 HYD HOSE HOLDER PNTD BLK 9-8D85U JACK SPOOL 3 X.56- -/ 00-8D853 JACK 8000# DROPLEG 5/8X4.5PIN 8D9090 HYD CYL.5 X 4 ULT PRNC 99-8D909 SEAL KIT PRINCE 8D9090/BA-067 8D9093 HYD CYL 3 X 4 ULTRA PRINCE 8D9094 SEAL KIT PRINCE 8D9093/BE D9095 HYD CYL.5 X 4 ULTRA/LR PRNC 8D907 SEAL KIT PRINCE 8D909/BG-034 8D908 ROLL PIN /4 X ZINC 8D909 HYD CYL 4 X 6 BLK ULTRA 8D90 HAIRPIN CLIP LARGE ( CYL PIN) 8D9 SEAL KIT PRINCE 8D9/BA D9 HYD CYL 3 X 6 ULT 99-8D9 HYD CYL.5 X 30 ULT 99-8D9 SEAL KIT PRINCE 8D9/BA D93 SEAL KIT PRINCE 8D95/BA-067 8D95 HYD CYL 3 X C-C ULT 8D95A CYLINDER CLEVIS FOR 8D95 8D95B PISTON ROD BA X7 8F0540 TANK 350 GAL LOPRO-REAR SUMP 8F0570 TANK 500 GAL LOPRO-CNTR SUMP 8F80 SPRING CONTROL SWNG ARM PNTD 8F36 O-RING SPRAYBALL SEAL 8F37 EXTENSION -/ SPRAYBALL 8F38 SPRAY BALL TANK RINSE FPT 8F30 SPRAY NOZ TANK RINSE 3/4 8F3305 CLAMP NOZZLE -/4 SQUARE 8F3308 BLANK PLUG TIP BRASS 8F334 SCREEN 50 MESH TEEJET RED POLY 8F336 SCREEN 00MESH TJET GREEN POLY 8F34X TIP TEEJET XR 800VS ORANGE 8F343A TIP/CAP COMBO AIC005VS GRN 8F343C TIP/CAP COMBO XRC8005VS GRN 8F345A TIP/CAP COMBO AIC00VS YLLW 8F345C TIP/CAP COMBO XRC800VS YLLW 8F347C TIP/CAP COMBO XRC8003VS BLUE 8F349C TIP/CAP COMBO XRC8004VS RED 8F34C TIP/CAP COMBO XRC8005VS BRWN 8F343C TIP/CAP COMBO XRC8006VS GRAY 8F345X TIP TEEJET XR 8008VS WHITE 8F35T TIP TEEJET TT 00VP ORANGE 8F35X TIP TEEJET XR 00VS ORANGE 8F353T TIP TEEJET TT 005VP GREEN 8F353X TIP TEEJET XR 005VS GREEN 8F355T TIP TEEJET TT 00VP YELLOW 8F355X TIP TEEJET XR 00VS YELLOW

178 Stock # Description Stock # Description 8F356A TIP/CAP COMBO AIC005VS PURP 8F356C TIP/CAP COMBO XRC005VS PURP 8F357A TIP/CAP COMBO AIC003VS BLUE 8F357C TIP/CAP COMBO XRC003VS BLUE 8F357T TIP TEEJET TT 003VP BLUE 8F359C TIP/CAP COMBO XRC004VS RED 8F359T TIP TEEJET TT 004VP RED 8F35C TIP/CAP COMBO XRC005VS BRWN 8F35T TIP TEEJET TT 005VP BROWN 8F360 CAP BLACK FLOODJET Q-JET 8F389 NOZZLE INLET EXTENSION 8F380 NOZZLE 3 HEAD PIN WHEEL PIPE 8F38 NOZZLE 5 HEAD PIN WHEEL PIPE 8F386 NOZZLE 3 HEAD TURRET PIPE 8F3830 NOZZLE HEAD QUICKJET PIPE 8F3860 NOZZLE BLOCK OFF COVER HYPRO 8F386 CAP BLACK TEEJET Q-JET 8F3887A O-RING HYPRO PIN WHEEL NOZZLE 8F3887C CLIP HYPRO PIN WHEEL NOZZLE 8F3887D SEAL KIT INTRNL HYPRO PNWHL 8F3888B SHUT OFF CAP NW HYPRO 0PSI 8F3888C SHUT OFF CAP NW HYPRO 0PSI 8F3888D SHUT OFF CAP NW HYPRO 5PSI 8F3890 DIAPHRAGM EPDM HYPRO SHUTOFF 8F389 SCREW&NUT CLMP HYPRO PNWNZ 8F389 GASKET EPDM Q-JET TIP SEAT 8F3896 DIAPHRAGM EPDM RUBBER Q-JET 8F393 STREET ELBOW /4 BRASS 8F393A STREET TEE /4 BRASS 8F394 FEMALE ELBOW /4 BRASS 8F395 NIPPLE /4 BRASS 9-8F395A NIPPLE /8 BRASS 8F397 BARB HOSE /4 X /8 MPT BRASS 8F397A ELBOW /4 HB X/8 MPT BRASS 8F397C QUICK DISCONNECT COUPLER /4HB 8F397D QUICK DISCONNECT ADAPTER /8MP 8F398 VALVE /4 M-NPT BRASS 8F398A VALVE /4 FPT X /4 MPT BRASS 8F399 VALVE /8 F-NPT CHROMD BRASS 8F399A DRAIN COCK /8 MPT BRASS 8F399D VALVE / MPT X / FPT CHROME 8F399F VALVE /8 FPT X /8 MPT CHROME 8F390 SWIVEL NOZZLE SINGLE Q-JET 8F39 BUSHING BRASS/8 FPT X /4 MPT 8F39 BARB HOSE / X/ MPT BRASS 8F393 ELBOW / HB X / MPT BRASS 8F3930 TIP TEEJET OFF-CNTR OC0 BR 8F393 TIP TEEJET OFF-CNTR OC03 BR 8F3934 TIP TEEJET OFF-CNTR OC04 BR 8F3936 TIP TEEJET OFF-CNTR OC06 BR 8F3938 TIP TEEJET OFF-CNTR OC08 BR 8F3940 TIP TEEJET OFF-CNTR OC BR 8F394 TIP TEEJET OFF-CNTR OC6 BR 8F5360 PUMP ONLY.5 X.5 GAS ENG 8F536 PUMP ONLY.5 X.5 GAS ENG 8F5364 PUMP ONLY X.5 GAS ENGINE 8F5366 PUMP ONLY X SP GAS ENGINE 8F5374 SEAL VITON FG460V5 SCOT 9.6 8F5376 O-RING CASING 40&460 SCOT 8F5378 FLINGER FG460V5 SCOT 8F538 SHAFT SLEEVE FG460V5 SCOT 8F5386 IMPELLER FG460V5 SCOT 8F5390 REPAIR KIT VITON FG40V8 SCOT 8F539 SEAL ONLY VITON FG40V8 SCOT 8F539 IMPELLER FG40V8 SCOT 8F5393 CASING FG40V5 SCOT 8F5394 ADAPTER FG40V5 SCOT 8F5756 ENGINE 5.5HP HONDA ROPE START 8F5756E ENGINE 5.5HP HONDA ELEC START 8F5760 ENGINE 8HP HONDA ROPE START 8F576 ENGINE 9HP HONDA W/CYCLONE 8F576E ENGINE 9HP HONDA ELEC START 8F870 SPRAY GUN GUNJET #-45-BR 8F87 RINSE GUN GUNJET 43L-AL-8 8F87A ALUMINUM INLET BODY WASH GUN 8F8754 ORIFICE DISK(AY-HSS 45)HANDGUN 8F8790 SWIVEL CONNECTOR 3/4 GHT 8F879 SWIVEL CONNECTOR / MXF-NPT 8F974N FITTING / HB X GHT M POLY 8F940 HOSE APPLICATOR 3/8 PER FT 8F980 TANK 5 GALLON FOAM 8F98 PUMP FOAM MARKER 8F984 COMPRESSOR HIGH VOLUME 8F986 COLLECTOR BOOT FOAM MARKR 8F988 COLLECTOR SOCK FOAM MARKR 8F980 FOAM CHAMBER FOAM MARKER 8F98 CHAMBER MOUNTING BRACKET 8F986 FILTER WHITE COMPRESSOR 8F SQUARE COMPRESSOR FILTER 8F983 NEEDLE VALVE FOAM MARKER 8F9834 HOSE /4 CLEAR 8F9836 FILTER IN TANK SUCTION 8F9838 SOLENOID 3-WAY FOAM MARKER 8F9840 HARNESS W/SWITCH FOAM MARKR 8F984 CABLE 5 EXTENSION FOAM MRKR 8F984 SWITCH ONLY FOAM MARKER 8F9844 Y HOSE ASSY FOAM MARKER 8F9850 MNT BRCKT SWTCH FOAM/REMOTE0-8G0007 FLAT 3/8X L ULT 05-8G00 BRACKET SPRAYER BV MNT 07-8G003 FLAT.38X.5-0 SNSRBRKT 08-8G004 STRIKER ROD.5X7.5 PNTD99-8G005 COVER NORAC SENSOR BLK 08-8G004 TUBE X ID-.56 SPACER 08-8G008 FLAT.3 X X 0.75 SPACR- 8G0030 L SHAPED HOSE BRACKET 3-8G830 HOOK HOSE HAND GUN / X 3.5 8G06 BREAKAWAY BOOM W/TUBE GREEN 8G03 BREAKAWAY CAST CNTR W/FLAT4.5 8G07 BRKAWAY CAST CNT W/FLT ADJ4.5 8G04 SPRING BFSA HD.6 X 6 GALV 8G050 SPRING.6 ID X 4.4 COMP PNTD 8G055 SPRING.6 ID X 6 COMP PNTD 8G060 WASHERGUIDE SPRING.75 ID 84-8G080 RUBBER ENGINE MNT.5 OD W/HL 8G60 SWING ARM (3/4 ID) 83-

179 Stock # Description Stock # Description 8G00 JACK LEG SKID SPRAYER 83-8G40 SPACER BLOCK SKID KNOCKON89-8G80 VALVE BRCKT SKID BTTMFLL 85-8G8 NYLON TIE.87 X 7-/ BROWN 8G8 NYLON TIE.87 X 7-/ RED 8G83 NYLON TIE.87 X 7-/ ORANGE 8G84 NYLON TIE.87 X 7-/ YELLOW 8G85 NYLON TIE.87 X 7-/ GREEN 8G86 NYLON TIE.87 X 7-/ BLUE 8G380 CONTROL BOX LESS COVER TL/EEN 8G384 COVER TIPLIFT CONTROL BOX 8G390 MNTNG BRCKT TIPLIFT CONTRL BOX 8G540 CORRUGATED LOOM.50 ID 8G54 CLIP CORRUGATED LOOM 8G544 OUTLET CORRUGATED LOOM 8G44 SWINGARM CNTRL.5 SQ 83-8G430 TEE HANDLE 7/6 NC 83-8G480 END STOP TUBE ASSY 83-8G560 BASE CNTRL SWNGARM MIDMNT90-8G585 VERTICAL UPRIGHT ASSY LT 95-8G595 VERTICAL UPRIGHT ASSY RT 95-8G500 BRCKT TRNS ADJ W/JCKATTCH 83-8G7390 BRACKET TRUCK CLEAN H0 95-8G8000 POLY BOOM PROTECTR FOR SQ-6 8G800 U-BOLT 3/8 X -5/6 X -/4 SQ 8G800 U-BOLT 3/8 X -9/6 X 3-/ SQ 8G8 HUB HDA W/CUPS&ZRK 4BLT 8G83 DUST CAP H 8G87 BEARING INNER & OUTER HDA 8G80 SEAL H 8G830 RACE INNER & OUTER H L4460 8G90 BRACKET DIRECTO/RADAR MNT93-8H304 SPRING HVY.9 ID-.88 PNTD 8J500 #6 JIC(M) X #6 JIC(M) UNION 8J50 #6 ORB TO 3/8 FPT ADAPTR SWVL 8J504 #4 ORB(M) X #6 JIC(M) ELBOW 8J506 #4 HEX SOCKET ORB PLUG 8J50 #0 JIC(M) X #0 JIC(M) UNION 8J550 3/8 MPT X #6JIC(M)STR ADPTR 8J55 #8 JIC(F) X #6 JIC(M) RDCR 8J570 / MPT X #0 JIC(M)STR ADPTR 8J500 #0 JIC(F) X #6 JIC(M)HEX BUSH 8J598 TEE #6 SWIVELNUTRUN(M+M+F-SW) 8J5300 TEE #6 JIC (MALE) 3X 8J53 TEE #0JIC(MX)X3/4-6ORBBRNCH 8J5500 9/6-8 ORB X #6 JIC(M) STR 8J550 3/4-6 ORB X #6 JIC(M) STR 8J550 3/4-6 ORB X #0 JIC(M) STR 8J55 3/4MPT X #0JIC(M) STR 8J5540 7/8-4 ORB X #0 JIC(M) STR 8J5550 -/6 - ORBX#0JIC(M)STR 8J5600 9/6-8 ORB X #6 JIC(F-SW)STR 8J560 3/4-6 ORB X #6 JIC(F-SW)STR 8J5680 3/4-6 ORB X 3/4-6ORB UNION 8J568 3/4-6ORB(X)ADJUSTABLE UNION 8J5690 3/4-6X3/4-6 ORB M-SW90*UNION 8J5700 #6 JIC(F-SW) X #6 JIC(M)90*ADP 8J570 #0 JIC(F-SW)X#0 JIC(M)90*ADP 9.7 8J5800 3/8 FPT X #6 JIC (F-SW) STR 8J580 / FPT X #0 JIC(F-SW) STR 8J5980 9/6-8ORB M X 3/4-6ORB F 8J6000 9/6-8 ORB X #6 JIC(M)90*ADP 8J600 9/6-8ORB X #6 JIC(M)BRNCH T 8J6004 9/6-8ORB X #6 JIC(M)RUN TEE 8J600 3/4-6 ORB X #6 JIC(M)90*ADP 8J600 3/4-6 ORB X #0 JIC(M)90*ADP 8J6030 7/8-4 ORB X #0 JIC(M)90*ADP 8J6060 3/4-6ORB X #6JIC(F-SW)90*ADP 8J7000 BALL VALVE HYD 9/6-8ORB(X) 8J7040 THERMAL RELIEF MANIFLD 4000PSI 8J70 CHECKVLV TNK 7/8-4ORB ML/FML 8J76 3/4-6 ORB(X)WAY /6 RESTR 8J76 #6JIC(M)X6JIC(F)/6 RSTR BLKZ 8J750 RELIEF VLV 50PSI 9/6-8ORB 8K09 SPINDLE W/H00 5K K0A SPINDLE W/H00 5K BLK 3-8K5350 SPLITSTEELBUSH X.5 ID- 8K5400 SPLITSTEELBUSH 4 X 3.5ID-.5 8K5505 U-BOLT 3/4 X -/8 X 4-/4 SQ 8K555 U-BOLT 3/4 X 4-/6 X 6 SQ 8K550 U-BOLT 3/4 X 6-/8 X 7-/ SQ 8K709 HUB H00 W/CUPS&ZERK 0BLT5K 8K70 HUB H00 W/CUPS&ZRK 0BLT 5K 8K7 HUB H00 W/CUPS&ZRK 0BLT K 8K7 GASKET HUB CAP H00 8K73 HUB CAP H00 DC7 8K74 BOLT HUB CAP H00 8K75 STUD WHEEL 3/4-6 UNF X -5/8 8K75B STUD WHEEL 3/4-6UNF X 3.3 8K76 NUT 3/4-6UNF FLANGE 8K77 BEARING INNER K H K78 BEARING OUTER &5K H K79 BEARING INNER 5K H K70 SEAL 3 ID K H00 SE48 8K7 SEAL 3.3 ID 5K H00 SE67 8K7 NUT 3/4-6UNF INNER BUDD 8K73 NUT -/8-6UNF OUTER BUDD 8K730 RACE INNER K H K73 RACE INNER 5K H K73 RACE OUTER K&5K H00 453A 8K750 AXLE K X -/8 96-8K75 AXLE 5K X K75 AXLE 5K 4.5 X K75A AXLE 5K 4.5 X K73 GASKET HUB CAP H K733 HUB CAP HDA K737 BEARING INNER HDA00 5K 8K738 BEARING OUTER HDA00 5K 8K730 SEAL 4.37 ID 5K H K7330 RACE INNER HDA00 5K 06-8K733 RACE OUTER HDA00 5K 06-8K8000 STL 7K045 3/8X3.5 PNTDLGHT09-8K8005 TUBE LGHT BRKT SHRT.5SQ PNTD 8K800 TUBE LGHT BRCKT.5SQ PNTD 00-8K805 TUBE LGHTBRKT.5SQ STR PTD- 8K800 STL GA MNTNG BRCKT LIGHT 00-

180 Stock # Description Stock # Description 8K8030 MODULE AG ENHNCD LGHT4PIN K8030A MODULE AG ENHNCDW/BRAKE6PIN08-8K8060B EXT HRNSS 6PIN DEUTSCH09-8K8067 DUST CAP FOR 7PIN CONNECT00-8K8070B MAIN HRNSS 7PNLNG W/BRAKE 09-8K8074 ND IMP JUMP HARNESS 09-8K8075A EXT HRNSS NONDRAWBR DTSCH 07-8K8080A EXT HRNSS DRAWBAR DEUTSCH 07-8K8088 LENS ONLY AMBER GROTE LGHT 00-8K8090B LIGHT LED AMBER WR DTSCH - 8K809 LENS ONLY RED GROTE LGHT K8095B LIGHT LED RED 3WIRE DTSCH - 8K805A EXT HARNESS 6 WIRE DTSCH 07-8K800 BRCKT SMV ATTCH 4-8 FRAME98-8K80 BRCKT SMV ATTCH BNT45* LR 05-8K80 BRCKT W/SCKT SMV ATCH K80 BRCKT LGHT.5X K90 PIN X 4 CYL-FOR/4 ROLL PIN 8K906 PIN -/4 X 4-3/8 HRDND /4HL 8K908 PIN -/4 X 5-/8 HRDND 3/8HL 8L000 TORX DRIVER BIT #40 TAMPROOF 8L00 SWITCH ORANGE CONTROL GRIP 8L00 SWITCH BLUE CONTROL GRIP 8L003 SWITCH YELLOW CONTROL GRIP 8L00 MANIFOLD VALVE BLK 5-BANK 05-8L004 MANIFOLD VALVE BLK 6-BANK 05-8L0030 SWITCH SPRING TOGGL NORM-OPEN 8L0036 DOUBLE PILOT OPERATED CHECK 8L004 VALVE ELEC/HYD 9/ L0050A SWITCH BOX W/HRNSS ULT/RA 05-8L005 SWITCH NEON RED SPST 99-8L005 SWITCH NEON ORANGE SPST 99-8L0053 SUCTION CUP CONTROL BOX MNT 8L0054 POWER CONNECTOR W/LEADS 99-8L0055 BREAKER 5 AMP RESETABLE 99-8L0056 CAP W/STRAP CNTRL GRIP PORT 8L0060 WIRING HARNESS- CART ULT 99-8L006 CART HARNESS W/ENHNCD LTG07-8L0070 WIRING HARNESS-VALVE ULT 07-8L007A VLVE HARNESS W/ENHNCD BRKLTG08 8L0075 HARNESS ADAPTOR WP TO DEUTSCH 8L008 HARNESS BOOM ULT W/ENHNCD 07-8L008 WIRE HARNESS BOOM ULTRA 05-8L0083 HARNESS BOOM ULTRA W/EHNCD 07-8L000 ACCUMULATOR PISTON TYPE 8L004 ACCUMULATOR INNER CUSHION 8L005 CHECK VALVE W.05 ORF #8 8L00 CUSHION BUMPER.5 DIA.RED 8L030 WELD ASSY TOUCH DOWN CRUTCH 8L048 STL 8L046 SAFETY LNK PNTD 07-8L05 STL 8L050 3/8 FOLDLNK PNTD99-8L06 STL 8L060 3/4 FOLDLNK PNTD99-8L070 ACCUMULATOR SADDLE 08-8L07 ACCUMULATOR RETAINER 08-8L04 SAFETY CHAIN 6400# 7MM X 4 8L043 SPINDLE W/ HUB TOUCHDWN 07-8L046 BUSHING.875X.5ID L047 BUSHING.65X.5ID L048 BUSHING.5X.765ID L050 BOLT 3/4-0NC X 4 WELDASSY 8L05 WASHER 3/4 ID X 3-/6 ODX /4 8L05 WASHER.8 IDX4.5ODX /4 YZ 8L058 U-BOLT 5/6 X -/ X -/ SQ 8L060 U-BOLT 3/8 X -3/4 X 3 SQ 8L06 U-BOLT 5/6 X X SQ 8L066 U-BOLT / X 3-/ X 5 SQ 8L068 U-BOLT 5/6 X 3 X 4 SQ 8L070 SLIDE BOLT LATCH ZNC PLTD 96-8L07 U-BOLT 5/6 X 3 X 7 SQ 8L0300 EYEBOLT / -3NC X EYE X 4 8L030 PROTECTOR WETBOOM -/4 X 0 8L030 PLATE PNT&LR CASTER WEAR 96-8L0400 WINDSHIELD SQ MNTG BRCKT 96-8L040 WINDSHIELD RD MNTG BRCKT 96-8L050 FLAT /4 X HNDL 3-8L050 STL 0GA BOOMBRACE FINSHD 99-8L05 STL 0GA PT & REAR BMBRC09-8L065 BUMPER THERMOPLASTIC 8L066 BUMPER NEOPRENE 80DURO W/PLT 8L0630 SADDLE DBL HOSE ULT/RA 0-8L0650 SPRING BOOM SUSPEN LT BLK 8L065 SPRING BOOM SUSPEN HVY GRN 8L0660 SPRING CABLE TENSION / X 4 8L0903 TUBE EXT X -3/8 SSTEEL 8L0906 TUBE EXT X -3/8 ALUM 93-8L0908 TUBE EXT X 4-3/8 ALUM 93-8L0908S TUBE EXT X 4-3/8 SSTEEL 8L0908U TUBE PRT WTBM X 45 ULT99-8L090 TUBE EXT WB X 59 ALUM 93-8L090B TUBE WB X 49 SPC 3NOZ 8L09 TUBE EXT WB X 45 SSTEEL 8L093 TUBE WB X 8.5 SPCG 4NOZ 8L090 TUBE MID WETBOOM X 05 8L09 TUBE WB X 45 0 SPC 8N0Z 8L09A TUBE WB X 59 SPC 8NOZ 8L09 TUBE MID WTBOOM X5 SP 8L093 TUBE MID WB X 05 SSTEEL 8L095 TUBE WB X 45 0 SP SS 8NOZ 8L0930 TUBE PART WETBOOM X 65 8L093 TUBE WB X 43.5 SPC 7NOZ 8L093 TUBE WB X 67.8 SPC 8NOZ 8L0933 TUBE PT WB X 65 SSTEEL 8L0940 TUBE PART WETBOOM X 5 8L094 TUBE PRT& AL WTBOOM X 85 8L0943 TUBE PT WB X 5 SSTEEL 8L0944 TUBE WB X 65 0 SP 4NOZ 8L095 TUBE WB X 64 0 SP SS 4NZ 8L0953 TUBE PT WB X 85 SSTEEL 8L096 TUBE WB 39-3/8 NZ SP 03-8L0964 TUBE WB 7 4NZ SP 03-8L0966 TUBE WB 4-/ 6NZ SP 03-8L0968 TUBE WB X 90 SPC 9NOZ 8L0969 TUBE WB 85-/ 9NZ SP 03-8L097 TUBE WB 9-3/4 SP NZ 04-8L0973 TUBE WB 63-/8 3NZ SP 04-8L0975 TUBE WB 5-/8 0NZ SP04-

181 Stock # Description Stock # Description 8L0977 TUBE WB 5-/4 NZ SP 04-8L05 SHOCK ABSORBER PAINTED 95-8L045 UHMW FLAT /4X5- CNTR 95-8L046 UHMW FLAT /4X5- W/NTCH95-8L05 TIVAR WEAR STRIP W/HLS 99-8L053 UHMW ANGL 3/8X3X3-7-/ R99-8L054 UHMW ANGL 3/8X3X3-7-/ L99-8L055 UHMW FLAT /4X-/ L056 UHMW DISK 3.5 ODX.8 ID 99-8L060 QUICKLINK 3/8 YEL ZINC 8L070 TURNBUCKLE 3/8 X 6 TAKE-UP 8L0 CHAIN 5/6 GR30 PROOF Z 8.5 8L45 CABLE /4 X 6.5 SPRING 96-8L50 CABLE /4 X 9.5 SPRING 93-8L55 CABLE /4 X 34 SPRING 96-8L60 CABLE /4 X SPRING 93-8L430 KIT RETROFIT PT PILOT CHK JIC 8L43 KIT RETROFIT PT PILOT CHK NPT 8L450A DBL BLCKNG VLV WAY NC 8L450B DBL BLCKNG VLV WAY NC SMLLCOL 8L45 BODY ONLY -8CAVITY Z-6 PORTS 8L45B POPPET WAY NC 5K DEUTSCH 8L453 RELIEF VALVE CAVITY PLUG WAY 8L454A POPPET WAY NO 8L455 SEAL KIT FOR 8L454 & 8L456 8L456 SPOOL WAY NORMALLY OPEN PT 8L457 CART WATERPRF SEAL KIT METLCAP 8L459 SPOOL WY NRMLLY OPN FOR ECOIL 8L460 RELIEF DIFFERETIAL AREA POPPET 8L46 CHECK VALVE HYD MANIFOLD ULT 8L463 CHECK VALVE FOR BLOCKING CIRCT 8L464 SEAL KIT FOR 8L45A/B 8L465 COIL NUT NOT WEATHERPROOF 8L466 COIL NUT NOT WEATHERPROOF 8L467 #8 PILOT PISTON W/SEALS 8L468 SMALL CART WATERPRF SEAL KIT 8L469 LARGE CART WATERPRF SEAL KIT 8L470 LARGE COIL W/WPAC V.67AMPS 8L47 #0 E-COIL VDC DEUTSCH.6A 8L47 SMALL COIL W/WPAC V.AMPS 8L473 #07 E-COIL VDC DEUTSCH.4A 8L475 MANIFOLD VALVE BLOCK BARE 5BNK 8L476 ORFICE DISC.5OD X.060 DROPIN 8L476A ORIFICE DSC.5OD X.05 OFFSET 8L476B ORIFICE DISC.5OD X.06 OFFSET 8L477 ORFICE DISC.5OD X.03 DROPIN 8L477A ORIFICE DSC.5OD X.04 OFFSET 8L478 ORIFICE DISC.5OD X.03 THREAD 8L478A ORIFICE DSC.5OD X.06 THREAD 8L479 ORIFICE DISC ONE WAY DROP IN 8L480 #6 SAE PLUG 8L48 #8 SAE PLUG 8L50 SPOOL VALVE 4WAY POSITION 8L50 SEAL KIT FOR 8L50 8L503 POPPET VALVE WAY NC 8L504 SEAL KIT FOR 8L456/46/503 8L505 SPOOL VALVE 4WAY 3POS MOTOR 8L508 SCREW /4-0X SOCKETHEADCAP 9.9 8L509 O-RINGS MANIFLD TO POWER UNIT 8L59 FENNER PLASTIC RESERVOIR 8L50 FILL CAP HYDRAULIC POWER UNIT 8L5 SOLENOID POWER UNIT MOTOR 8L5 MOTOR ONLY FENNER POWER UNIT 8L53 FENNER UNIT TANK O-RING 8L603 HYD POWER UNIT W/CNTL & E-COIL 8L70 WP CABLE SEAL GRAY 8L80 GROUND CABLE ASSY BLACK 8L84 HONDA ENGINE STARTER CABLE RED 8L85 POWER CABLE ASSY RED 8L90 HARNESS 77 ELEC ENDNOZ WETB9-8L904 HARNESS 6 ELECENDNOZ WET09-8L907A HARNESS UPPER PLUGIN DTSH - 8L908 HARNESS LOWER WIRE DTSH 08-8L909 BRKT TIPLIFT CNTRL BOX 0-8L90A TIPLIFT CNTRL BOX WO/HRNS 0-8L9 HARNESS 4.5 AGITATOR EXT09-8L99 HARNESS 0 BV EXTENSION 04-8L00 LEG SQ X 43.5 SCLTR&PT 96-8L9 CLEANOUT PKG QUICK SINGL WETBM 8L305 WELD ASSY CROSS BRACE SKID 95-8L30 VERTICAL SLIDE WETBM TRCK 95-8L308 TOUCHDOWN WHEEL BRCKT ULTRA07-8L3035 PUSH BRCKT BOOM WNDSHLD 96-8L304 WELD ASSY CNTR BEAM TRCK 95-8L3050 WELD ASSY LEFT CABLE YOKE 93-8L3055 WELD ASSY RGHT CABLE YOKE 93-8L3060 WELD ASSY LEFT BOOM PIVOT 93-8L3065 WELD ASSY RGHT BOOM PIVOT 93-8L3070 WELD ASSY INNER HINGE 93-8L3075 JACK ATTCH BLT-ON WS TRCK 96-8L3080 WELD ASSY 0 PRT LEFT N9-8L3083 WELD ASSY 5 PRT LEFT 9N 96-8L3090 WELD ASSY 0 PRT RGHT N9-8L3093 WELD ASSY 5 PRT RGHT 9N 96-8L300 WELD ASSY LEFT MIDHING PT&SKD 8L30 WELD ASSY RGHT MIDHING PT&SKD 8L37 WELD ASSY 0 PRT LEFT 6N 93-8L30 WELD ASSY 5 PRT LEFT 9N 93-8L37 WELD ASSY 0 PRT RGHT 6N 93-8L330 WELD ASSY 5 PRT RGHT 9N 93-8L333 WELD ASSY BOOM EXT LEFT N 93-8L337 WELD ASSY BOOM EXT LEFT N 93-8L340 WELD ASSY BOOM EXT LEFT 3N 9-8L343 WELD ASSY BOOM EXT RGHT N 93-8L347 WELD ASSY BOOM EXT RGHT N 93-8L350 WELD ASSY BOOM EXT RGHT 3N 9-8L360 TRANSPRT LOCK LEFT TRUCK 93-8L370 TRANSPRT LOCK RGHT TRUCK 93-8L39 PUMP MNT FLAT.5X L300 WELD ASSY LEFT BOOM LATCH 93-8L30 WELD ASSY RGHT BOOM LATCH 93-8L30 LEFT BOTTOM BREAKAWAY ASSY 93-8L330 RGHT BOTTOM BREAKAWAY ASSY 93-8L340 BRCKT SKID HOLD DOWN 9-8L380 WELD ASSY LEFT BOX LOCK 93-8L385 WELD ASSY RGHT BOX LOCK 93-

182 Stock # Description Stock # Description 8L390 WELD ASSY TRNSPRT LOCK EXT 93-8L3300 WELD ASSY LEFT REARBOOM ADJ93-8L330 WELD ASSY RGHT REARBOOM ADJ93-8L330 STOP ASSY LEFT BOOM PVT 93-8L3330 STOP ASSY RGHTBOOM PVT 93-8L335 LDDR ASSY NRRW CART L3353 LDDR ASSY NRRW CART L3355 LDDR ASSY NRRW CART L3359 LADDER ULTIMATE (30 ) 99-8L3374 WELD ASSY RNSGUN HOLSTR 05-8L4000 SUPERSKID 350/500 GAL MM 8L400 CRADLE 70GAL RINSE TNK 0-8L4003 RETAIN STRP 70GAL RNS CRADL0-8L4550 PIN SWING ARM GREASE 07-8L4594 PIN MID BOOM LOCK ULTRA YZ 08-8L4596 TOP SWIVEL ASSY HVYDUTY 08-8L460 ROD SPRING CLEVIS GUIDE YZ 8L460 PIN X 4.9 PLTD YZ 07-8L4605 SWING GLIDE STRAP REINFRCD 05-8L4607 FOLD BRCKT ADJSTBL BOOM 06-8L4608L BRACKET LEFT BOOM FOLD L 06-8L4608R BRACKET RGHT BOOM FOLD L 06-8L4609 PIN X.38 PLTD YZ 08-8L46L WELD ASSY LFT MIDBM PIN BRKT 8L46R WELD ASSY RGT MIDBM PIN BRKT 8L463L WELD ASSY LFT OTR BM PIN BRKT 8L463R WELD ASSY RGT OTR BM PIN BRKT 8L465 PARALLEL LNK ANGLE BRACE 05-8L466 CYL MNTG CLEVIS HVY DUTY 08-8L467 ULTRA PART CABLE ANCHOR 08-8L460 SPACER PRT EYEBOLT ULTRA P/C 8L465L CYLINDER MNTNG BRKT LEFT 09-8L465R CYLINDER MNTNG BRKT RGHT 09-8L466 EYEBOLT.5 DIAX EYE YZ 07-8L468 EYEBOLT.5 DIAX.6 EYE YZ07-8L469 LEFT REAR CYLINDER ATTCH 08-8L4630 RGHT REAR CYLINDER ATTCH 08-8L4635L LEFT KNUCKL HINGE ULTRA 06-8L4635R RGHT KNUCKL HINGE ULTRA 06-8L4636 LEFT PT3 INNR HINGE ASSY 05-8L4637 RGHT PT3 INNR HINGE ASSY 05-8L4640 LEFT PT INNR HINGE ASSY 05-8L464 RGHT PT INNR HINGE ASSY 05-8L4646 LEFT PT OUTR HINGE ASSY 05-8L4647 RGHT PT OUTR HINGE ASSY 05-8L4650 LEFT PT OUTR HINGE ASSY 05-8L465 RGHT PT OUTR HINGE ASSY 05-8L4658L TRANSPORT REST LFT VRTCL 08-8L4658R TRANSPORT REST RGT VRTCL 08-8L4660L TRANSPORT REST LFT VRTCL 05-8L4660R TRANSPORT REST RGT VRTCL 05-8L466 TRANSPORT CROSS BRACE 05-8L466 FLAT 3/8 X3-70 TRNSBRACE 07-8L4663 TRANSPORT REST TRIFOLD 05-8L4667 TRANS CROSS BRACE ULTRA - 8L4670 WIDE REAR BOOM ASSY ULTRA 05-8L4675 WIDE FIXED CNTR MNT ULTRA 05-8L4676 PART 3 RDBOOM 0 LEFT L4677 PART 3 RDBOOM 0 RGHT 07-8L4679 WIDE SWNGNG CNTR WLDMNT 05-8L468A PT RDBOOM 3 LFT RVSD 08-8L468B PT LFT 3 RVSD ERLY DSN -08 8L4683A PT RDBOOM 3 RGT RVSD 08-8L4683B PT RGT 3 RVSD ERLY DSN -08 8L4684 PART 3 RDBOOM 0 LEFT 05-8L4685 PART 3 RDBOOM 0 RGHT 05-8L4687 LEFT SNGL NOZ ULTRA EXT 07-8L4688 RGHT SNGL NOZ ULTRA EXT 07-8L469 PART RDBOOM 0 LEFT 05-8L4693 PART RDBOOM 0 RGHT 05-8L4694 PART 3 RDBOOM 6 8 LEFT 05-8L4695 PART 3 RDBOOM 6 8 RGHT 05-8L4697 LEFT DBL NOZ ULTRA EXT 07-8L4698 RGHT DBL NOZ ULTRA EXT 07-8L470 HOSE PROTECTOR BRACKET 99-8L470A CENTER HOSE PROTECTR BRKT05-8L4703 CYLINDER MOUNTING CLEVIS 99-8L4704 TUBE ODX.56 IDX3-5/8 99-8L4705 SWING GLIDE STRAP ULT/RA 99-8L4706 ACCUMULATOR BRACKET 99-8L4707 REAR JACK ATTCH ULT/ULTRA 99-8L4709 CLEVIS SPRING CUSHION ULT 99-8L470A SWING ARM CAST PNTD 08-8L47 WELD ASSY LEFT HNG PIN BRK 00-8L47 WELD ASSY RGHT HNG PIN BRK 00-8L473 PT TRNSPT REST PIN SHORT 99-8L473A LG PT TRNSPT PIN SHORT 0-8L474 PT TRNSPT REST PIN LONG 99-8L474A LG PT TRNSPT PIN LONG 0-8L475 LINK ARM ASSY ULT/ULTRA 99-8L476 PT TRNSPT REST SUPPORT 99-8L476A LG PT TRANS REST SUPPORT0-8L477 CABLE ANCHOR BOTTOM PT 99-8L478 CABLE ANCHOR TOP PT 99-8L470L LEFT PIVOT MNTNG ASSY ULT 99-8L470R RGHT PIVOT MNTNG ASSY ULT 99-8L474 TOP ATTACH BOLT ZINC PL 99-8L475 MOUNTNG BRCKT CYL ULT/RA 99-8L476A EYEBOLT.5DIAX EYE PCYZ06-8L477 LEFT REAR CYLINDER ATTCH 99-8L478 RGHT REAR CYLINDER ATTCH 99-8L479 EYEBOLT DIAX EYE PT YZ99-8L4730 SHOCK MNTNG BRCKT LEFT ULT 99-8L473 SHOCK MNTNG BRCKT RGHT ULT 99-8L473 CROSS SUPPORT ULTIMATE 99-8L473A CROSS SUPPORT W/LRG UBOLTS 8L4734 CROSS SUPPORT W/BRKT 99-8L4734A CROSS SUPPORT W/BRKT & LRG BLT 8L4735L LEFT REAR BOOM ATCH ULT/RA 04-8L4735R RGHT REAR BOOM ATCH ULT/RA 04-8L4736A PIN KNUCKLE HINGE ULT YZ 0-8L4736C PIN KNUCKLE HINGE ULT YZ- 8L4736D PIN KNUCKLE HINGE ULTRAYZ- 8L4737 KNUCKLE CAST HINGE ULT FINISHD 8L4745 TOP SWIVEL ASSY ULT 99-8L4746 PIVOT BUSHING ASSY ULT 99-

183 Stock # Description Stock # Description 8L4760L TRANSPORT REST LFT VRTCL 99-8L4760R TRANSPORT REST RGT VRTCL 99-8L476L TRANS REST ULTIMATE LEFT 0-8L476R TRANS REST ULTIMATE RGHT 0-8L4763 TRANSPORT REST ULTIMATE 99-8L4764L TRANSPORT REST LFT ULT NRWCRT 8L4764R TRANSPORT REST RGT ULT NRWCRT 8L4765 TRNSPRT REST BOTM SUPPORT99-8L4770 REAR BOOM ASSY ULT 99-8L4775 STATIONARY CENTER ULT 99-8L4779 SWINGING CNTR WELD ASSY 99-8L478 PART BOOM 5 LEFT ULT 0-8L4783 PART BOOM 5 RGHT ULT 0-8L4785A PART BOOM 0 LEFT ULT 0-8L4786A PART BOOM 0 RGHT ULT 0-8L4788 PART BOOM 5 LEFT ULT 0-8L4789 PART BOOM 5 RGHT ULT 0-8L4790 PART BOOM 0 LEFT ULT 99-8L479 PART BOOM 0 RGHT ULT 99-8L479 PART BOOM 5 LEFT ULT 99-8L4793 PART BOOM 5 RGHT ULT 99-8L4794 PART BOOM 0 LEFT ULT 99-8L4795 PART BOOM 0 RGHT ULT 99-8L4796 NOZZLE BOOM EXT ULT 99-8L4797 NOZZLE BOOM EXT ULT 99-8L4798 PART BOOM 5 LEFT ULT 99-8L4799 PART BOOM 5 RGHT ULT 99-8L NOZZLE BOOM EXT ULT 8L487 KIT PRT LATCH HYDFLDBOOM ULT 8L4969 WELD ASSY ULT REAR BTTMFL05-8L4970 WELD ASSY ND ULT BTTMFLL07-8L497 STABILIZR LEFT BOOM PT&SKD96-8L4974 STABILIZR RGHT BOOM PT&SKD96-8L4978 STABILIZR LTCH ASSY LT TRCK96-8L4979 STABILIZR LTCH ASSY RT TRCK96-8L498 BRCKT PT3 LATCH POST ULTRA 05-8L498 BRACKET LEFT PRT LATCH 96-8L4984 BRACKET RGHT PRT LATCH 96-8L4987 CAST LATCH CLIP CASTDESIGN 09-8L4988 MIDDLE BOOM LOCK CNTR PC 08-8L PART LATCH BRCKT ULT 99-8L499 MIDDLE BOOM NORAC SNSR BRCKT 8L6400 CABLE KIT ULTRA PT-PT RETRO 8L999 NORAC RETRO UPGRADE PKG OPT F 8L9998 SAFETY LINK UPDATE PKG 8N00 NORAC VALVE PKG STATION 8N003 NORAC FOAM SENSOR DISK 8N005 NORAC ORING 06-8N009 NORAC BOOM SENSOR REBUILT 8N00 NORAC BOOM SENSOR NEW UC4+ 8N0 NORAC BOOM SENSOR NEW UC5+ 8N03 NORAC ELEC COIL DEUTSCH 09-8N05 NORAC MOUNTING BRKT BRKWY BASE 8N06 NORAC SENSOR MOUNT BRACKET 8N0 SEVERE TERRAIN PKG UC5 09-8N0 NORAC CABLE BOOM SENSOR 06-8N09 NORAC CABLE VALVE EXT SM 09-8N034 NORAC CABLE SEVR TERN 4& N037 ECHO DISPLAY ONLY W/SWITCH 8N038 PULSE DISPLAY TRML KIT UC5 0-8N039 CABLE UC5 BAT PIGTAIL 5A FUSED 8N040 PANEL NORAC BOOM CONTROL 08-8N04 NORAC RAM MOUNT PANAL UC4 08-8N043 UC4+ ROLL SNSW/TMP PRB 0-8N045 UC4+ ROLL SENSOR 0-8N046 UC5 ROLL SENSOR 0-8N050 NORAC SEAL KIT CHECK VALVE 06-8N05 NORAC SEAL KIT PILOP CKVLV 06-8N054 NORAC O-RING - FILTER CAP 06-8N057 NORAC CNTR LIFT CNTRL UC5 8N060 NORAC SENSOR TEST KIT 8N06 UC4+ ENHANCED STABILTY 8N064 UC5 ENHANCED STABILITY 8N068 NORAC TRANSDUCER FOR SNSR 06-8N070 NORAC CBLE PWR BM CNTL SM 09-8N07 NORAC CBLINRFC UC4 PWRAMPT 09-8N074 NORAC CBLINTRFC UC4 ROL DT 09-8N076 NORAC CBLINTFC UC4 RMT MAN 09-8N078 NORAC CBLVLV UC4 BC MNLIFT 09-8N080 UC5-GRNSR INTERFACE CBLE0-8N08 UC5-PR0600 INTERFACE CBLE - 8N0 /4X HYD HOSE #6FJX3000PSI 8N04 /4X 4 HYD HOSE #6FJX3000PSI 8N036 /4X 36 HYD HOSE #6FJX3000PSI 8N050 /4X 50 HYD HOSE #6FJX3000PSI 8N054 /4X 54 HYD HOSE #6FJX3000PSI 8N060 /4X 60 HYD HOSE #6FJX3000PSI 8N07 /4X 7 HYD HOSE #6FJX3000PSI 8N076 /4X 76 HYD HOSE #6FJX3000PSI 8N088 /4X 88 HYD HOSE #6FJX3000PSI 8N096 /4X 96 HYD HOSE #6FJX3000PSI 8N0 /4X 0 HYD HOSE #6FJX3000PSI 8N0 /4X 0 HYD HOSE #6FJX3000PSI 8N35 /4X 35 HYD HOSE #6FJX3000PSI 8N60 /4X 60 HYD HOSE #6FJX3000PSI 8N90 /4X 90 HYD HOSE #6FJX3000PSI 8N0 /4X 0 HYD HOSE #6FJX3000PSI 8N48 /4X 48 HYD HOSE #6FJX3000PSI 8N50 /4X 50 HYD HOSE #6FJX3000PSI 8N360 /4X 360 HYD HOSE #6FJX3000PSI 8N400 /4X 400 HYD HOSE #6FJX3000PSI 8N40 /4X 40 HYD HOSE #6FJX3000PSI 8N308 3/8X 8 HYD HOSE #6FJX3000PSI 8N308 3/8X 8 HYD HOSE #6FJX3000PSI 8N3035 3/8X 35 HYD HOSE #6FJX3000PSI 8N3048 3/8X 48 HYD HOSE #6FJX3000PSI 8N3060 3/8X 60 HYD HOSE #6FJX3000PSI 8N3070 3/8X 70 HYD HOSE #6FJX3000PSI 8N3084 3/8X 84 HYD HOSE #6FJX3000PSI 8N3096 3/8X 96 HYD HOSE #6FJX3000PSI 8N308 3/8X 08 HYD HOSE #6FJX3000PSI 8N34 3/8X 4 HYD HOSE #6FJX3000PSI 8N336 3/8X 36 HYD HOSE #6FJX3000PSI 8N350 3/8X 50 HYD HOSE #6FJX3000PSI 8N356 3/8X 56 HYD HOSE #6FJX3000PSI 8N360 3/8X 60 HYD HOSE #6FJX3000PSI

184 Stock # Description Stock # Description 8N380 3/8X 80 HYD HOSE #6FJX3000PSI 8N304 3/8X 04 HYD HOSE #6FJX3000PSI 8N36 3/8X 6 HYD HOSE #6FJX3000PSI 8N38 3/8X 8 HYD HOSE #6FJX3000PSI 8N35 3/8X 5 HYD HOSE #6FJX3000PSI 8N376 3/8X 76 HYD HOSE #6FJX3000PSI 8N388 3/8X 88 HYD HOSE #6FJX3000PSI 8N33 3/8X 3 HYD HOSE #6FJX3000PSI 8N3330 3/8X 330 HYD HOSE #6FJX3000PSI 8N3348 3/8X 348 HYD HOSE #6FJX3000PSI 8N3360 3/8X 360 HYD HOSE #6FJX3000PSI 8N3390 3/8X 390 HYD HOSE #6FJX3000PSI 8N3408 3/8X 408 HYD HOSE #6FJX3000PSI 8N343 3/8X 43 HYD HOSE #6FJX3000PSI 8N346 3/8X 46 HYD HOSE #6FJX3000PSI 8N3534 3/8X 534 HYD HOSE #6FJX3000PSI 8N3570 3/8X 570 HYD HOSE #6FJX3000PSI 8N3606 3/8X 606 HYD HOSE #6FJX3000PSI 8N406 /X 6 HYD HOSE#0FJX3000PSI 8N4060 /X 60 HYD HOSE#0FJX3000PSI 8N44 /X 4 HYD HOSE#0FJX3000PSI 8N40 /X 0 HYD HOSE#0FJX3000PSI 8N438 /X 38 HYD HOSE#0FJX3000PSI 8N460 /X 60 HYD HOSE#0FJX3000PSI 8N498 /X 98 HYD HOSE#0FJX3000PSI 8N46 /X 6 HYD HOSE#0FJX3000PSI 8N48 /X 8 HYD HOSE#0FJX3000PSI 8N4546 /X 546 HYD HOSE#0FJX3000PSI 8N464 /X 64 HYD HOSE#0FJX3000PSI 8N54 5/8X 4 HYD HOSE#0FJX3000PSI 8N50 5/8X 0 HYD HOSE#0FJX3000PSI 8N538 5/8X 38 HYD HOSE#0FJX3000PSI 8S0003 SEPARATOR BRACE FORMED&P/C D 8S0005 TCHDWN BRACE ULTRA FRMED&PNTD 8S0006 STL GA FORMED CLEANLOAD BRC 8S0074 MUFFLER CLAMP HD -/8 PLATED 8S0080 PIPE CLAMP.90 ID PLATED YZ 8S000 BUCKLE TANK STRAP 9-8S08 POLYESTER STRAP X 4 BLK 8S00 POLYESTER STRAP X 40 BLK 8S080 U-BOLT 5/6 X X -3/4 RND 8S095 U-BOLT 3/8 X -5/8 X 4-/4 RND 8S035 U-BOLT 3/8 X 3 X 4-/8 RND 8S037 U-BOLT 3/8 X 3.63 X 5.88 RND 8S039 U-BOLT 3/8 X 3 X 4-/8 SQ 8S0330 U-BOLT / X 3 X 4-/4 SQ 8S0340 U-BOLT / X 4 X 5-/4 SQ 8S0345 U-BOLT / X 5 X 6-/4 SQ 8S0358 U-BOLT 5/8X3.06X 4.5 SQ.5 T 8S0360 U-BOLT 5/8 X 6-/6 X 4-/ SQ 8S0660 SPRING.4 ODX 7.8 EXT PNTD 8S0684 SPRING SHOCK ABSORBER SSV96-0 8S080 SIDE RAILING BOTTOM PEG 03-8S000 SHOCK ABSORBER 9-0 8S00 SHOCK ABSORBER ULTIM 99-8S00 ADJUSTING CAM 9-0 8S004 UPPER SPRING RETAINER 9-0 8S060 STEEL PULLEY DIA / ID S076 QUICKLINK /4 YELLOW ZINC 8S08 CABLE CLAMP 3/6 MALLEABLE YZ 8S00 CHAIN #3 X 4 LINK (6 ) 9-8S0 SIGN SLOW MOVING VEHICLE(SMV) 8S4 MOUNTING SOCKET SMV SIGN 8S6 MNT SPADE W/HRDWR SMV SIGN 8S70 WHEEL 38 X 6 0 BOLT YLW 8S70G WHEEL 38 X 6 0 BOLT GRY 8S75 TIRE 480/80R38 55B TL TRACTOR 8S80L WHLW-480/80R38-55 ULTRTORQ LH 8S80R WHLW-480/80R38-55 ULTRTORQ RH 8S88 WHEEL 38X6 0BLT 3 OFFSET 8S88G WHEEL 38X6 0BLT 3 OFFST GRA 8S89 WHEEL 50 X0 0 BLT 0 OFFSET 8S89G WHEEL 50X0 0BLT 0 OFFST GRA 8S89ZG WHEEL 46X0 0BLT 0 OFFST GRAY 8S90 WHEEL 46 X 0 BLT 0 OFFSET 8S9 WHEEL 50 X0 0 BLT 0 OFFSET 8S9G WHEEL 50X0 0BLT 0 OFFST GRAY 8S9 WHEEL 46 X 0 BLT OFFSET 8S9G WHEEL 46X 0BLT OFFST GRAY 8S93 WHEEL 50 X0 0 BLT OFFSET 8S93G WHEEL 50X0 0BLT OFFST GRA 8S94 WHEEL 46 X 0 BLT 5 OFFSET 8S94G WHEEL 46 X 0 BLT 5OFFST G 8S95 TIRE 380/90R46 59A8 TL TRACTR 8S98 TIRE 30/90R50 59 TL TRACTOR 8S300L WHL-380/90R46 59A ULTTOR TLLH 8S300R WHL-380/90R46 59A ULTTOR TLRH 8S980 HYD HOSE CLAMP-SMALL-NYLON 8S990 HYD HOSE CLAMP-LARGE-NYLON 8S300 CLAMP RIBBED-BLACK-PAIR9-8S305 CLAMP.375 ID PAIR 9-8S3038 CVR PLT -3/6X-3/4 (-.5ID) 8S3043 CVR PLT X 4-5/8 (.4ID)PUNCH 8S3059 CAPLUG FITS.067 ID TUBE96-8S304 CAP CLEAN HO TANK 8S308 SPIGOT ONLY CLEAN HO TANK 8S3 TANK 5 GAL HO SAFETY-NT TNK 8S34 COVER MARKER/5GLCLEAN H0 96-8S35 COVER CROPCARE CLEAN H S330 CHEMICAL GOGGLE 8S340 VINYL COATED GLOVES 8S4008 SPACER 0 FOR ULT DUALS 07-8S400 SPACER FOR ULT DUALS 06-8S40 SPACER 5 FOR ULT DUALS 06-8S400 CART TRUSS ULTRA 0-8S40 CART TRUSS NRRW ULTRA 0-8S408A CART HITCH EXT BLTON LONG08-8S409A CART HITCH EXT BLTON SHRT08-8S4030 CART HITCH BOLT ON RECEIVR 07-8S4036 RETAINER LWR CAST AXL PTD03-8S4037 RETAINER FRT SLIDING AXL 03-8S404 WIDE AXLE WELD ASSY NRRW CART 8S404 AXLE WELD ASSY NARROW NT 03-8S4043 NRRW AXLE WELD ASSY NRRWCART 8S4047 AXLE WELD ASSY BEET SPCL 03-8S4048A AXLE SLIDE LFT NRW HVYAXL0-

185 Stock # Description Stock # Description 8S4049A AXLE SLIDE RGT NRW HVYAXL0-8S405 AXLE WELD ASSY WIDE NT 03-8S4058A AXLE SLIDE LFT WIDEAXL NT06-8S4059A AXLE SLIDE RGT WIDEAXL NT06-8S4060 AXLE SLIDE LFT NRW DUALS S4060A AXLE SLIDE LFT NRW DUALS 0-8S406 AXLE SLIDE RGT NRW DUALS S406A AXLE SLIDE RGT NRW DUALS 0-8S406 AXLE SLIDE LFT NRW SINGL S406A AXLE SLIDE LFT NRW SING 0-8S4063 AXLE SLIDE RGT NRW SINGL S4063A AXLE SLIDE RGT NRW SING 0-8S408B K SPNDL HLDR 00 LGBLT0-8S4083A 5K SPNDL HLDR 00 LGBLT0-8S4083L LEFT SPNDL HLDR 00 5K S4083R RGHT SPNDL HLDR 00 5K S4084L LEFT SPNDL HLDR 00 5K 0-8S4084R RGHT SPNDL HLDR 00 5K 0-8S438 STRAP 500GAL NT TANK END03-8S49 SPACER TUBE FOAM.5X3X7 99-8S493 SPACER TUBE FOAM 3SQ X S495 PLATFORM FOAM MARKER MNT 99-8S40 HANDLE SIDE RAILING LTCH 03-8S40 RETAINER SIDE RAILNG HNDL03-8S406 LADDER ASSY FLIPOVRFRNTPLFM3-8S408L PIVOT LEFT FLIP OVER LADDR 3-8S408R PIVOT RGHT FLIP OVER LADDR 3-8S40L SIDE LEFT FOLD OVER LADDER 3-8S40R SIDE RGHT FOLD OVER LADDER 3-8S46L SUPPORT LFT500GALSIDEPLTFM- 8S46R SUPPORT RGT500GALSIDEPLTFM- 8S47 HAND RAIL 500NT FAR END 03-8S49 HAND RAIL 500NT BIG SIDE03-8S40 LADDER STRUT 500GAL ULTRA 05-8S4A HANDRAIL SHORT ALUM SIDE 0-8S4 PLATFORM SIDE000ULT/NRW 07-8S430A PLATFORM 500CC SIDE P/C 07-8S43A SKID 00 RINSE ACE TANK 08-8S435 BRKT REMOTE GAUGE MNT ULT 03-8S437 FLAT /4 X GA MNT05-8S47 PTO PLUMBING BRKT SUC/DIS00-8S476 BOLT FLAT UNVRSL.5X4X S478 THREADED BRKT SUCTION 96-8S480 3 MANIFLD BRKT FLNGD UNIV - 8S48 MANIFLD BRKT FLNGD UNIVRSL 99-8S48 THREADED BRKT PRESSURE 96-8S486 BUSHING BRKT FLOWMETER 96-8S488 THREADED BRKT FLOWMETER 96-8S489 BOLT PLATE HONDA TO ULT 05-8S49 BOLT PLATE BOTTOM FILLPTD0-8S496 DRAIN BRACKET ULT/ULTRA 96-8S497 CHEMICAL INDUCTOR BRCKT 03-8S430A SIGHT TUBE BRKT ULTRA 0-8S4305 SIGHT TUBE BRKT 000 GAL 0-8S4308 SIGHT TUBE BRKT S440 PLTFRM FRT UPPER 0-8S44 PLTFRM FRONT LOWER 0-8S445 RAIL STAIR LOWER PTD 0-8S446 RAIL STAIR UPPR PTD 0-8S447 RAIL UPPER RGHT PTD 0-8S448 RAIL UPPER LFT PTD 0-8S4430 UPPR STAIR BRKT RIGHT PTD 0-8S443 UPPR STAIR BRKT LEFT PTD 0-8S443 PT STAIR BRKT BNT-LEFT 0-8S4433 PT STAIR BRKT BNT-RGHT 0-8S4434 STAIR LOWER PT 0-8S4435 STAIR TREAD 6-3/8X6 PTD 0-8S4440 LOWER STAIR HINGE PIVOT 0-8S4450 RAIL STAIR UPPER NRRW PTD0-8S445 RAIL STAIR UPR 000GAL PTD0-8S4460 UPPR STAIR BRKT NRRW PTD-L 0-8S446 UPPR STAIR BRKT NRRW PTD-R 0-8S446 UPPR STAIR BRKT 000 PTD-L 0-8S4463 UPPR STAIR BRKT 000 PTD-R 0-8S4464 UPPR STAIR BRKT 000N PTD-L0-8S4465 UPPR STAIR BRKT 000N PTD-R0-8S4554 BRCKT SAFETY HO FAUCET 03-8S4560 BRACKET NOZZLE MNTNG PLTD 05-8S456 BRCKT RUBBER BOOMSTOP PLTD 05-8S550.5 SPINDLE FOR HUB 07-8S5857 DECAL BRACKET 500NT SING03-8S9398 AXLE PKG ULT/RA NARROW S9399 AXLE PKG ULT/RA WIDE S9400 AXLE PKG BEETSPL S940 WIDE AXLE PKG NRRW CART S946 BELT DRV PTO PUMP PKG 8-SPLNE 8S SMARTBM PKG WO/ANT - 8S SMARTBM PKG W/ANT - 8S SMARTBM PKG WO/ ANT - 8S SMARTBM PKG W/ ANT - 8S99 INTEGRAL ELEC AGITATOR RETRO 8S9970 NORAC UPDATE PKG UC4-4+ 3SNS 8S997 NORAC UPDATE PKG UC4-4+ 5SNS 8T986 CLAMP / (-8)WRNG RUBBERBACK 8T988 CLAMP 3/8 (-6)WRNG RUBBERBACK 8T990 HYD HOSE CLAMP MTL/RUB BACK 8W00 U-BOLT / X X 3-/4 SQ 8W04 U-BOLT / X 3 X 3 SQ 8W05 U-BOLT 5/8 X 3.06 X 3.5 SQ 8W588 3/4-6ORB PORT RESTRICTR.03 8W589 3/4-6ORB PORT WAYRESTR/6 8X0000 BOLT /4-0X3/4 FLLTHD GR5 YZ 8X0000B BOLT /4-0NC X GR5 YZ 8X000 BOLT 3/8-6NC X 3/4 GR5 YZ 8X000 BOLT 3/8-6NC X GR5 YZ 8X0004 BOLT 3/8-6NC X -/4 GR5 YZ 8X0005 BOLT /4-0NC X 3-3/4 GR5 YZ 8X0006 BOLT 3/8-6NC X -/ GR5 YZ 8X0007 BOLT 3/8-6NC X -/ GR5 YZ 8X0008 BOLT 3/8-6NC X GR5 YZ 8X0009 BOLT /4-0NC X GR5 YZ 8X000 BOLT /4-0NC X -/4 GR5 YZ 8X00 SCREW RDHD SLOT/4-0X.5 YZ 8X00 BOLT /4-0NC X 5 GR5 YZ 8X003 BOLT /4-0NC X -/ GR5 YZ 8X004 BOLT /4-0 X 3 GR5 ZNCOAT 9.3

186 Stock # Description Stock # Description 8X005 BOLT 3/8-6NC X 3-3/4 GR5 YZ 8X006 BOLT 3/4X.75 W/.38THD GR8 YZ 8X006 BOLT 3/8-6NC X 3 GR5 YZ 8X007 BOLT 3/4-0NC X GR5 YZ 8X007 BOLT 3/8-6NC X 5 GR5 YZ 8X00 BOLT 3/4-0NC X -/4 GR5 YZ 8X009 BOLT 3/8-6NC X 4-/ GR5 YZ 8X0 BOLT 3/4-0NC X -/ GR5 YZ 8X000 BOLT 3/8-6X3.5 FULLTHDGR5 YZ 8X0A BOLT 3/4-0NC X -3/4 GR5 YZ 8X00 BOLT 5/6-8NC X 3/4 GR5 YZ 8X0 BOLT 3/4-0NC X -/4 GR5 YZ 8X00A BOLT 5/6-8NC X GR5 YZ 8X03 BOLT 3/4-0NC X 5 GR5 YZ 8X00B BOLT 5/6-8NC X -/4 GR5 YZ 8X04 BOLT 3/4-0NC X 3 GR5 YZ 8X00 SCKT CAP 5/6-8 X GR5 YZ 8X05 BOLT 3/4-0NC X 3-/ GR5 YZ 8X003 BOLT 5/6-8NC X GR5 YZ 8X05A BOLT 3/4NCX 3.5 FULLTHD GR5 YZ 8X0030 BOLT 5/6-8NC X 5 GR5 YZ 8X05B BOLT 3/4-0NC X 3-/ GR8 YZ 8X003 BOLT 7/6-4NC X GR5 YZ 8X06 BOLT 3/4-0NC X 6 GR5 YZ 8X0033 BOLT 7/6X.5 5/8 THD GR5 YZ 8X07 BOLT 3/4-0NC X 7 GR5 YZ 8X0034 BOLT 7/6-4NC X.75 GR5 YZ 8X08 BOLT 3/4-0NC X 4 GR5 YZ 8X0036 BOLT 7/6-4NC X GR5 YZ 8X08A BOLT 3/4-0NC X 4-/4 GR5 YZ 8X0037 PLOWBOLT /-3NC X GR5 YZ 8X09 BOLT 3/4-0NC X 7-/ GR5 YZ 8X0037A PLOWBOLT /-3NCX.5 GR5 YZ 8X00 BOLT 3/4-0NC X 9 GR5 YZ 8X0038 BOLT 7/6-4NC X -/ GR5 YZ 8X0 BOLT 3/4-0NC X 6-/ GR5 YZ 8X004 BOLT 7/6-4NC X 3 GR5 YZ 8X0 BOLT 3/4-0NC X 4-/ GR5 YZ 8X0044 BOLT 7/6-4NC X 3-/ GR5 YZ 8X03 BOLT 3/4-0NC X 5-/ GR5 YZ 8X0045 BOLT 7/6-4NC X 4-/ GR5 YZ 8X05 BOLT 3/4-0NC X 0 GR5 YZ 8X0046 BOLT 7/6-4NC X 7-/4 GR5 YZ 8X06 BOLT 3/4-0NC X 7-/ GR8 YZ 8X0047 BOLT 7/6-4NC X 6 GR5 YZ 8X08 BOLT 3/4-0NC X 8-/ GR8 YZ 8X0048 CRG 7/6-4NC X 3-/ GR5 YZ 8X030 BOLT 7/8-9NC X GR5 YZ 8X006 BOLT /-3NC X -/4 GR5 YZ 8X03 BOLT 7/8-9NC X -/ GR5 YZ 8X006 BOLT /-3NC X GR5 YZ 8X033 BOLT 7/8-9NC X 3 GR5 YZ 8X0063 BOLT /-3NC X -/ GR5 YZ 8X033A BOLT 7/8-9NCX3 GR5 FULL THD 8X0064 CRG /-3NC X -/ GR5 YZ 8X034 BOLT 7/8-9NC X 4 GR5 YZ 8X0065 CRG /-3NC X GR5 YZ 8X038 BOLT -8NC X 5-/ GR5 YZ 8X0065L CRG /-3NC X 3 GR5 ZINC 8X039 BOLT -8NC X 3 GR5 YZ 8X0065S SCKT CAP /-3 X.6 GR8 PLN 8X040 BOLT -8NCX7 W/.5 THDGR5 YZ 8X0066 BOLT /-3NC X -3/4 GR5 YZ 8X04 BOLT -8NC X 7.5 GR5 YZ 8X0067 BOLT /-3NC X -/4 GR5 YZ 8X04 BOLT -8NC X 3.5 GR5 YZ 8X0068 BOLT /-3NC X -/ GR5 YZ 8X043 BOLT -8NC X 5 GR5 YZ 8X0069 BOLT /-3NC X 3 GR5 YZ 8X045 BOLT -8NC X 0-/ GR5 YZ 8X0070 BOLT /-3NC X 3-/4 GR5 YZ 8X046 BOLT -8NC X 8-/ GR5 YZ 8X007 BOLT /-3X 3 SHOULDR GR YZ 8X049 BOLT -8NC X 8 GR5 YZ 8X007 BOLT /-3NC X 3-3/4 GR5 YZ 8X050 BOLT -8NC X 0 GR5 YZ 8X0073 BOLT /-3NC X 5 GR5 YZ 8X058 SCREW SS SQDRV SMS 8X 8X0074 BOLT /-3NC X 4-/ GR5 YZ 8X060 SCREW NO. 0 X 4-5/8 8X0075 BOLT /-3NC X 6 GR5 YZ 8X064 SCRW TRSS HD SLOT#0X4-3 YZ 8X0077 BOLT /-3NC X 7-/ GR5 YZ 8X065 SCRW TRSS HD PHPLS/4-0-3/4SS 8X0078 BOLT /-3X3.6 SHLDR GR YZ 8X066 SCREW PAN HD PHLPS /4X0X SS 8X0080 BOLT /-3NC X GR5 YZ 8X068 SCRW TORXTAMPPRF 5/6-8X YZ 8X008 BOLT /-3NC X 6-/ GR5 YZ 8X069 SCREW FLOORING /4 X.5 PLN 8X0083 BOLT /-3NC X 8 GR5 YZ 8X076 SELF-DRILL SCRW 0-6X/ RUB 8X0084 BOLT /-3NC X 9 GR5 YZ 8X078 SELF-DRL SCRW -4X3/4 RUB YZ 8X0087 BOLT 5/8-NC X -/ GR5 YZ 8X080 SELF-DRL SCRW -4 X RUB YZ 8X0090 BOLT 5/8-NC X -/4 GR5 YZ 8X08 SELF-DRL SCRW -4X.5 RUB YZ 8X009 BOLT 5/8-NC X -3/4 GR5 YZ 8X00 NUT 3/8-6NC HEX GR YZ 8X009 BOLT 5/8-NC X -3/4 GR5 YZ 8X00 NUT 3/8-6NC NY-LOCK GR YZ 8X0093 BOLT 5/8-NC X GR5 YZ 8X003 NUT 3/8-6NC SERFLANG GR YZ 8X0095 BOLT 5/8-NC X 5 GR5 YZ 8X004 NUT 3/8-6NC HEX GR GALV 8X0096 BOLT 5/8-NC X 4 GR5 YZ 8X005 NUT 0-4 HEX YZ 8X0098 BOLT 5/8-X 3.5 FULLTHDGR5 YZ 8X00 NUT 5/6-8NC HEX GR YZ 8X0099 BOLT 5/8-X6.75 W/3.5THDGR5YZ 8X0 NUT 5/6-8NC SERFLANG GR YZ 8X000 BOLT 5/8-NC X 8 GR8 YZ 8X0 NUT 5/6-8NC NY-LOCK GR YZ 8X00 BOLT 5/8-NC X 8 GR5 YZ 8X08 NUT /4-0NC SQ GR SS 8X00 BOLT 5/8-NC X 9 GR5 YZ 8X NUT /4-0NC HEX GR YZ

187 Stock # Description Stock # Description 8X0 NUT /4-0NC NY-LOCK GR YZ 8X03 NUT /4-0NC SERFLANG GR YZ 8X03 NUT 7/6-4NC HEX GR YZ 8X034 NUT 7/6-4NC NY-LOCK GR YZ 8X040 NUT / -3NC HEX GR YZ 8X04 NUT / -3NC NY-LOCK GR YZ 8X044 NUT / -3NC FLANG TOP LOCK Z 8X046 NUT / -3NC SERFLANG GR YZ 8X049 NUT, H-PILOT WELD 5/8 -NC 8X050 NUT 5/8 -NC HEX GR YZ 8X05 NUT 5/8 -NC JAM GR YZ 8X053 NUT 5/8 -NC NY-LOCK GR YZ 8X056 NUT 5/8 -NC SERFLANG GR YZ 8X059 NUT 3/4-0NC JAM GR YZ 8X060 NUT 3/4-0NC HEX GR YZ 8X06 NUT 3/4-0NC NY-LOCK GR YZ 8X064 NUT 3/4-0NC BEVL CNTRLCK YZ 8X065 NUT 3/4-0NC CNTRLOCK GR YZ 8X066 NUT 3/4-0NC SERFLANG GR YZ 8X068 NUT 7/8-9NC HEX GR YZ 8X069 NUT 7/8-9NC JAM GR YZ 8X070 NUT 7/8-9NC CNTRLOCK GR YZ 8X074 NUT 7/8-9NC FLNG GRF YZ 8X077 NUT -8NC JAM GR YZ 8X078 NUT -8NC JAM TOPLOCK GR YZ 8X080 NUT -8NC HEX GR YZ 8X08 NUT -8NC NY-LOCK GR YZ 8X08 NUT -4TPI TOPLOCK GR B Z 8X083 NUT -/4-7NC JAM GR YZ 8X084 NUT -/4-7NC HEX GR YZ 8X085 NUT -/ -6NC HEX GR YZ 8X086 NUT -/ -6NC JAM GR YZ 8X090 NUT -/4-7NC HEXSLOT GR YZ 8X09 NUT -4.5 HVY HEXSLOT GR PLN 8X09S NUT NC HEXSLOT MACHIND.75 8X099 LOCKWASHER /4 EXT TOOTH SS 8X0300 LOCKWASHER 5/6 YLW ZNC 8X030 LOCKWASHER 3/8 YLW ZNC 8X030 LOCKWASHER 7/6 YLW ZNC 8X0303 LOCKWASHER / YLW ZNC 8X0304 LOCKWASHER 5/8 YLW ZNC 8X0306 LOCKWASHER 3/4 YLW ZNC 8X0307 LOCKWASHER 7/8 YLW ZNC 8X0308 LOCKWASHER /4 YLW ZNC 8X0309 LOCKWASHER YLW ZNC 8X03 LOCKWASHER -/4 YLW ZNC 8X03 WASHER /4 X -/4 FENDER SS 8X035 LOCKWASHER -/ YLW ZNC 8X036 WASHER SAE FLAT YZ 8X037 WASHER 3/4 SAE FLAT YZ 8X038 WASHER 3/4 (3/6 ID)FLAT YZ 8X039 WASHER 7/3 IDX7/8ODX6GA YZ 8X030 WASHER 3/8 (7/6 ID)FLAT YZ 8X033 WASHER 5/8 SAE FLAT YZ 8X035 WASHER 3/4 (3/6 ID)FLAT PLN 8X036 WASHER.57 IDX.75 OD PLN 8X037 WASHER -/4 SAE FLAT YZ 8X038 WASHER.3 IDX.5 OD-/4 BL 8X039 WASHER 5/6 (3/8 ID)FLAT YZ 8X0330 WASHER 7/3 ID X.5 OD YZ 8X033 WASHER 5/3 ID X.5 OD YZ 8X033 WASHER /4 (5/6 ID) FLAT YZ 8X0333 WASHER HARROW TOOTH YZ 8X0354 WASHER -/ IDX.5 X4GA YZ 8X0355 WASHER -/ IDX.5 X0GA PLN 8X036 WASHER.03IDX-7/8ODX 9GA PLN 8X0364 WASHER.5 IDX3.5 ODX 4GA YZ 8X0366 WASHER.03IDX-7/8ODX /4 PLN 8X0367 WASHER -3/4 IDX3.5 X4GA PLN 8X0368 WASHER -/ SAE FLAT PLN 8X0370 WASHER 3.06 IDX 3.93 ODX 4GA 8X0380 WASHER 3.06 IDX4.5 X 3/6 8X0400 HAIRPIN CLIP /8 X -5/6 8X040 HAIRPIN CLIP /8 X -9/6 8X0405 SNAPPER PIN /4 X.75 8X040 COTTER PIN 3/6 X YZ 8X044 COTTER PIN /4 X YZ 8X045 COTTER PIN 3/6 X -/ 8X048 COTTER PIN 5/6 X -/ YZ 8X040 CLEVIS PIN 7/6 X -3/4 YZ 8X04 CLEVIS PIN / X -/4 YZ 8X045 CLEVIS PIN / X 3 YZ 8X048 CLEVIS PIN / X 5-/4 YZ 8X043 CLEVIS PIN / X 6 YZ 8X0440 CLEVIS PIN 5/8 X 3-7/8 YZ 8X046 CLEVIS PIN 3/8 X 3 W/HL YZ 8X0480 HITCH PIN W/LYNCH 5/8X4 YZ 8X049 LYNCH PIN 3/6 X -/4 YZ 8X0505 S-HOOK.5 X -3/8 ZINC 8X050 ROLL PIN 3/6 X ZINC CLEAR 8X053 ROLL PIN 5/6 X -/ PLN 8X058 ROLL PIN 3/8 X -/ ZINC 8X0560 RIVET 3/6 SML FLNG.700 8X0605 SET SCRW SQ HD 7/6-4X YZ 8X063 SET SCRW SCKT 7/6-4X.5 PLN 8X0665 SET SCRW SQ HD 3/4-0X4.5 YZ 8X0708 ZERK /4-8 NF STR YZ 8X070 ZERK /4-8 NF 90 DEG YZ 8X07 ZERK 5/6-4 NF STR YZ 8X075 ZERK /8 MPT STR YZ 8X077 ZERK /8 MPT 90 DEG YZ 8X0850 STUD 3/4-0 X.5 B7 YZ 8X0 CRG 3/8-6NC X GR ZN 8X5 CRG 3/8-6NC X -/ GR ZN 8X0 CRG 3/8-6NC X GR ZN 8X30 CRG 3/8-6NC X 3 GR ZN 8X35 CRG 3/8-6NC X 3-/ GR ZN 8X40 CRG 3/8-6NC X 4 GR ZN 8Z0070 DECAL SUMMERS.5 X 6 8Z0079 DECAL SUMMERS 5 X 0 8Z0080 DECAL BOOM RELEASE NOTICE 95-8Z008 DECAL SPRYR PARKNG WARNNG 97-8Z0086 DECAL ELECTROCUTN DANGER SPRYR 8Z0087 DECAL WARNING PINCH POINT03-8Z0089 DECAL DANGER CONFINED SPACE 8Z00 SUMMERS DECAL 8Z043 DECAL ID ULTIMATE NT 03-8Z DECAL ID ULTRA SPRAYER 05-

188 Stock # Description Stock # Description 8Z SUMMERS DECAL 4-8Z076 DECAL GENERAL CAUTION 9-8Z078 DECAL WHEEL TIGHTENING 96-8Z084 DECAL NT TELESCOPE AXLE 03-8Z086 DECAL NARROW CART ADJAXLE07-8Z088 DECAL RNS TNK PLMBNG TRLR99-8Z088A TRAILR RINS SYS DECAL MOLDON 8Z090 DECAL SINGLE TANK PLUMBING 96-8Z090A DECAL SNGL TANK PLBNG MOLDON 8Z09 DECAL DUAL TANK PLUMBING 96-8Z096 DECAL 500NW SIGHT TUBE - 8Z097 DECAL 000NT SIGHT TUBE 03-8Z098 DECAL 650NW SIGHT TUBE - 8Z099 DECAL 500NT SIGHT TUBE 03-8Z0300 DECAL 650NT SIGHT TUBE 0-8Z0450 DECAL MONOGRAM FOR RAVEN CONSL 8Z0500 DECAL GAUGE PANEL - 8Z054 TAG RINSE TANK ID X 98-8Z058 TAG TANK NOZZLE ID X 98-8Z050 TAG RINSE WAND ID X 98-8Z05 TAG MN TANK SUCTION ID 03-8Z054 TAG MN TANK BOTTOM FILL 03-8Z056 TAG MN TANK CHEMICAL FIL 03-8Z058 TAG MN TANK AGITATOR ID 03-8Z0530 TAG MN TANK PUMP FILL ID 03-8Z053 TAG MN TANK VENT ID 03-8Z054 TAG FRNT TANK SUCTION ID 03-8Z0544 TAG FNT TANK BOTTOM FILL 03-8Z0546 TAG FNT TANK CHEMICAL FL 03-8Z0548 TAG FNT TANK AGITATOR ID 03-8Z0550 TAG FNT TANK PUMP FILL ID 03-8Z055 TAG FRNT TANK VENT ID 03-8Z0800 REFLECTOR AMBER ADHSVBCK98-8Z0805 REFLCTR REDORANGE ADHSVBK99-8Z080 REFLECTOR RED ADHSV-BACK 98-8Z000 MANUAL-PAK 3DIA X Z06S OPERATORS MANUAL ULT/ULTRA 8Z07 APPLICATION RATE CARD TEEJET 8Z SCS450 INSTLLN&SERVICE MANUAL 8ZR SCS450 RSSN INST&SRVC MANUAL 9.6

189 History of Summers Manufacturing Co., Inc. 965 Summers Manufacturing is founded by Harley Summers, who purchases patent rights for Goebel truck and pickup hoists from the Goebel Brothers of Lehr, ND. These hoists, produced in Harley Summers blacksmith shop the first year, were distributed nationwide by a Cincinnati, Ohio, dealer. With increasing sales, the company soon outgrows the small shop. Summers wins the Herman harrow contract, beginning the company s Herman culti-harrow line. Summers builds a 7,00 square-foot factory in Maddock to meet the demand for truck and pickup hoists, as well as Herman harrows. 969 Firm incorporates and becomes officially known as Summers Manufacturing Company, Inc. 970 Summers purchases rights to manufacture/market the Herman Harrow. 973 Company builds new 0,000 square-foot plant and offices in Maddock, adding a 0,000 square-foot assembly plant in the fall of 975 (completed in January 976), bringing total square footage of Maddock factories to 47, Summers introduces the Agri-sprayer, used in conjunction with the Herman culti-harrow to incorporate herbicides and liquid fertilizer. 980 Company purchases manufacturing and distributing rights to Crown rockpickers from Crown Manufacturers of Regina, Saskatchewan. This forces another expansion project a 6,000 square foot factory on a 4 acre site in Devils Lake, ND Industrial Park. 98 Company establishes a branch facility in Regina, Saskatchewan. 98 Devils Lake plant begins operations in January, manufacturing supersprayers and rockpickers. The Maddock factory begins producing the Superweeder, a combination cultivator and harrow. 983 Summers buys manufacturing and distributing rights to the Fargo Field Sprayer line from Mid America Steel (formerly Fargo Foundry), Fargo. This field sprayer line is manufactured at the Devils Lake plant. Harley Summers is selected North Dakota s small-businessman of the year by the Small Business Administration. 984 Herman Diamond Disk, a disk harrow made in a diamond shape to reduce blade breakage from rocks, comes off the assembly line. 985 Summers signs a contract with Melroe Company of Bismarck to obtain exclusive manufacturing rights to the Melroe harrow line. 989 Summers purchases TorMaster Company of Hordean, Manitoba, giving the company a line of rolling packer equipment, comprised of harrow packers and hydraulic fold coil packers. 99 A new engineering office/parts department is added to the Devils Lake factory. 993 Company adds two new products: a pickup-mounted sprayer with booms of 80 and 90 feet, and the Summers Superharrow, an extra-heavyduty residue-management tool designed for the minimum and no-till farmer. 994 a 50 by 5 foot addition to the Maddock factory is completed. Construction begins on a 4,576 square-foot addition to the Devils Lake factory, which enables the company to increase production of truck-mounted and pull-type supersprayers and rockpickers square foot office area added to the Maddock plant. Company introduces Chisel Plow with floating hitch and 700# trip assembly ,800 square foot warehouse in Maddock purchased from local business Company introduces the Ultimate suspended boom trailer sprayer with hydraulic folding booms. Additional sizes added to the Chisel Plow line, now ranging from 8 to Company introduces the Supercoulter, the innovative solution for excessive field residue management on no-till, minimum-till, and conventional-till farming operations Cold storage building completed at Devils Lake. Company extends boom lengths up to 0 feet on the Ultimate Supersprayer Company adds a warehouse and service man in Aberdeen, SD Company introduces the Ultimate NT Supersprayer featuring a bolt on axle for easier adjustment, and a new family of tanks that feature a drainable sump and a common width dimension A 4 ft. x 30 ft. addition is added onto the current Devils Lake plant The Summers Superroller is added to the Field Tested Tough product line. Additional sizes of 56, 58 and 60 are added to the Superchisel line. Ultimate-Ultra NT Supersprayer introduced featuring 0 & 33 booms The Summers Coulter-Chisel, Rolling Choppers and 30 Superroller were included in product line & 84 5 Section Landrollers and a 0 Coulter-Chisel were introduced Disk-Chisels, ranging from 6 to 40 widths, are added to product line. 009 M05 and M08 Mounted Harrows added to selection of Mounted Attachments. SuperHarrow 650, 50 SuperCoulter, Hydraulic Fold Rolling Chopper and 36 diameter Landrollers introduced. 00 Rolling Basket and 47 Diamond Disk added to product line. A 4 ft. x 30 ft. addition to Devils Lake factory built for a state of the art paint system. 0 Additional Supercoulter sizes were added along with larger tires for tillage implements. Ultimate and Ultra Supersprayers received an additional tank size of 650 gallons. Front Caster Wheel option was made available for chisel implements. 0 4, 46 & 53 Trail Type Landroller added to product line. Additional Superchisel sizes of 6 & 0 were added. 03 DT9530 added to product line. Internal Scraper in Rolling Baskets introduced. Finishing Coulter Gang becomes standard on the Diamond Disk and 50 DT. Corporate offices opened at Devils Lake plant. New building and location for the Aberdeen warehouse. Summers distributes on a wholesale level to dealers and distributors throughout markets in North Dakota, South Dakota, Minnesota, Montana, Iowa, Washington, Idaho, Oregon, Utah, Colorado, Kansas, Nebraska, Oklahoma, Texas, Manitoba, Saskatchewan, Alberta, British Columbia, Kazakhstan, Russia and Australia, making it an international company.

190 Tillage Cultivators/Harrows Rock Picker Mounted Attachments Land Rollers/Packers Sprayers