Ignition Controllers MIC3 MIC4 MIC5 MOTORTECH. MIC Series. reliable efficient worldwide MOTORTECH IGNITION CONTROLLER MOTORTECH IGNITION CONTROLLER

Size: px
Start display at page:

Download "Ignition Controllers MIC3 MIC4 MIC5 MOTORTECH. MIC Series. reliable efficient worldwide MOTORTECH IGNITION CONTROLLER MOTORTECH IGNITION CONTROLLER"

Transcription

1 MOTORTECH Ignition Controllers MIC3 MOTORTECH IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER MIC5 MOTORTECH IGNITION CONTROLLER REV. 09/ /2013 MIC Series reliable efficient worldwide 1

2 MIC Series MOTORTECH Ignition Controllers MOTORTECH has developed into one of the leading manufacturers of ignition controllers in the global market for industrial gas engines. The MOTORTECH ignition controller series now provides solutions for virtually all gas types and engine sizes. Cooperation with leading engine manufacturers, packagers and operators has resulted in specific designs of equipment. The result is the ability to maintain ideal engine performance across a variety of applications. As the Biogas market continues to grow the need to ignite various gasses like mine gas and drilling gas effectively grows. MOTORTECH meets these needs by offering products that provide increased ignition energy, long duration spark control while maintaining precise ignition timing. Efficiency and device availability drive MOTORTECH to devote its efforts to peak technology for the future. 2

3 MIC3 MOTORTECH IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER MIC5 MOTORTECH IGNITION CONTROLLER Characteristics MIC Series General For 2- and 4-stroke enginers Ignition technology pulse width modulated Technical restriction to 6000 rpm Max. trigger impulses or 500 teeth on the flywheel CSA certified (Class I, Div. 2, Group C, D; T4) Technical data & functions Ignition timing to 0.1 crankshaft Magnetic, Hall effect- or inductive pickup Control of ignition timing optional by - potentiometer - Speed curve ma analog input V analog input Control of the ignition energy by the patented MOST (MOTORTECH Output Stage Technology) Ignition sequence in device programmable Safety shutdown during overspeed Access control via password Programmable spark duration Ignition energy regulation 2 programmable speed curves with max. 8 speed points (speed/ignition timing) Diagnosis memory System status display Error memory Ignition diagnosis Runtime data Alarm and error messages Data logging Primary, secondary misfire recognition Individual cylinder voltage calculation (kv) Interfaces CAN Bus 2.0b interface (CANopen-/SAE J1939 protocol) RS485 interface (Modbus RTU) USB 2.0-interface Inputs Digital ignition impulse input (start/stop) configurable digital input (GPI) Digital input for parameter set conversion (schedule A/B) Outputs 1 angle-dependent synchronization output (ASO), e.g. to connect a detonation control system (e.g. DetCon) or for injection systems 1 multi-function output (GPO) Ignition confirmation (Go/NoGo) Configuration With the assistance of the graphic user interface MICT (MOTORTECH Integrated Configuration Tool, see page 10) 3

4 System Overview MIC Series 1 DetCon20 MOTORTECH DETONATION CONTROL SYSTEM PowerView3 MOTORTECH ENGINE INFORMATION MONITOR MIC MOTORTECH IGNITION CONTROLLER C D CAN CAN 0 5 V/4 20 ma 24 VDC Power Supply 6 A V 2 X Z ) 7 W B Y 8 1) In combination with the MIC3 only a crank shaft sensor is possible. 4

5 Legend Neccessary components 1 MIC Ignition Controller 2 Pickup cable* 3 Pickup* 4 Trigger pins/magnets alternative 5 Trigger disc alternative Trigger drive 6 Output cable harness* 7 Ignition coil* 8 1 Primary cable/ignition lead per ignition coil Accessories A Junction box B AlphaRail-/ LiteRail ignition wiring rail* System enhancement C DetCon20 Detonation contoller D PowerView3 HMI module Description V Camshaft W Crankshaft X Engine Y Cylinder Z Harness to connect the ignition wiring rails and the junction box * Shielded and unshielded versions available. Common versions for pickup arrangement Pickup arrangement with 3 pickups in 4 stroke engines 1) Reset (crankshaft) Magnetic pickup (holes, pins, teeth, screws) 2) Speed (crankshaft) Magnetic pickup (holes, pins, teeth, screws) 3) Camshaft Hall effect pickup (magnets) alternative 3) Camshaft Inductive pickup (Pins, screws, grooves) Pickup arrangement with 1 with pickup in four stroke engines 1) Camshaft Hall effect pickup (disc with magnets) alternative 1) Camshaft Inductive pickup (disk with pins, screws, grooves) Pickup arrangement with 2 pickup in 2 stroke engines 1) Reset Magnetic pickup (holes, pins, teeth, screws) 2) Speed (crankshaft) Magnetic pickup (holes, pins, teeth, screws) 5

6 Technical Data MIC Series Feature MIC3 series MIC4 series MIC5 series Max. number ignition outputs 6/12 8/16 20 General Max. number pickups 1, 2 1, 2, 3 1, 2, 3 Voltage supply VDC VDC VDC permitted ambient temperature 40 C to +60 C 40 C to +60 C (LD) 40 C to +70 C (HD) 40 C to +60 C Max. primary voltage 250 VDC 250 VDC 250 VDC Power Max. ignition energy 200 mj (300 mj boost for start phase) 300 mj (500 mj boost for start phase) 500 mj (700 mj boost for start phase) Max. programmable spark duration µsec µsec µsec Available housing versions 1) Light Duty (LD) Panel Mount (PM), Light Duty (LD), Heavy Duty (HD) Heavy Duty (HD) Dimensions 250 mm x 240 mm x 89.5 mm 304 mm x 240 mm x 97.5 mm (LD) 371 mm x 240 mm x mm Protection class IP54 IP20, IP54, IP65 IP65 Housing Engine installation not permitted not permitted not permitted Potentiometer number for manual speed adjustment Input cabling O 2 (continuously variable) 2 (continuously variable) 35-pin, pin (MIL) Multi-point connector (Optional 2 MIL Version) Multi-point connector Output cabling 17-pin, socket (MIL) 17-pin, socket (MIL) 35-pin, socket (MIL) Status LEDs number ) Please contact your MOTORTECH partner for information on the availability of housing versions

7 Possible MIC4 housing versions Housing version LD (Light Duty)* Standard configuration for applications in direct vicinity of gas engines in protected environment. The electronic system is integrated in a solid aluminum housing. 17 pole military style connector (socket) for 8 and 16 outputs Plug connectors for input wiring Optional 2 MIL version for fast installation For ambient temperatures from -40 C to +60 C (-40 F to +140 F) Protection rating IP54 CSA Class I, Division 2, Group C, D; T4 304 mm x 240 mm x 97.5 mm (L x B x H) Optionally as 2-MIL version Housing version PM (Panel Mount switch cabinet installation)* Device configuration for assembly in control panels. Equipped with plug connectors for simple integration into the wiring system. Plug connectors for input and output wiring (8 and 16 outputs) For ambient temperatures from -20 C to +50 C (-4 F to +122 F) Protection rating IP20 CSA Class I, Division 2, Group C, D; T4 (within a control panel) 304 mm x 240 mm x mm (L x B x H) Back Housing version HD (Heavy Duty)* When it s time to really get down to business. The Heavy Duty housing is 100 % reliable whether in hot desert sand or perpetual ice! 17 pole military style connector (socket) for 8 and 16 outputs Plug connectors for input wiring Optional as 2 MIL version for fast installation For ambient temperatures from -40 C to +70 C (-40 F to +158 F) Integrated cooling element for optimal heat dissipation Protection rating IP65 CSA Class I, Division 2, Group C, D; T4 304 x 240 x mm (L x B x H) * ATEX versions available. 7

8 MOTORTECH Output Stage Technology Patented Technology for MIC3/MIC4/MIC5* MOST MOTORTECH OUTPUT STAGE TECHNOLOGY Efficiency-enhanced engines, highly compressed mixtures, as well as the use of a great variety of gas types are putting greater demands on the entire ignition system, including: reliable ignition even with weak or fluctuating calorific values of the gas compliance with the strictest emission regulations eliminates knocking and misfiring reduction of maintenance through longer spark plug runtimes These requirements can only be met by precision ignition behavior and efficient control of the ignition spark. MOTORTECH Output Stage Technology* (MOST) was developed by MOTORTECH for this. MOST works with the following principles: adjustable ignition spark duration with different available ignition voltages constant spark intensity via adjusted ignition spark duration 200 to 700 mj of primary energy (device dependent) are available Settings for MOST in MICT The settings for MOST are made using the MICT configuration software. On the configuration side Timing Schedule A/B Energy, you can define different values for the spark duration, spark intensity, breakdown voltage and energy limit for the start phase and normal operation. That way starting difficulties of the engine can be caught. Different energy settings for the two schedules A and B support, for example, optimally matched two gas operations. The settings are dependent on the ignition coils that are used, among other things. They must be suitable for MOST and set correctly on the configuration side Engine Ignition Coils. To optimize the energy settings for an engine, the ignition behavior must be observed and analyzed (misfiring, knock behavior, emission values, etc.). The secondary side diagnosis with MICT, among other things, can help here. *Patent No.: US 8,893,692 BS. 8

9 The graphic compares the behavior of a conventional capacitor discharge ignition system (CDI) and ignition system with MOST. Capacitor discharge ignition system (CDI) The red curve shows that a high peak current is reached during ignition. Afterwards, the current decreases sharply. To achieve longer spark duration, the energy supply must be increased. The result of this is a higher peak current. Ignition system with MOST The blue curve shows that a lower peak current is reached during ignition with MOST. The current remains at a constant level until the energy supply ends. Thereafter, the current drops. In this case as well, more energy is supplied for a longer spark duration, however the peak current is not increased in the process. 100 Capacitor Discharge Ignition System (CDI) MOTORTECH Output Stage Technology (MOST) Secondary Current [ma] 50 variable variable Spark Duration [µs] 9

10 MICT MOTORTECH Integrated Configuration Tool The MICT2.0 is the graphic user interface for the controllers of the MIC3, MIC4 und MIC5 series. Configurations can be performed and the operating data of the engine seen and adjusted using a laptop. Language selectable (German/English/Chinese) Compatible with Microsoft Windows XP/Vista/7 Print function of a runtime data snapshop for external problem analysis, etc. MICT MOTORTECH INTEGRATED CONFIGURATION TOOL Context-independent online help Different access levels to avoid unintended incorrect entries Example pages configuration Parameter set The database included provides engine information such as ignition order, ignition sequence, number of ignition coils per cylinder and typical number of teeth on the flywheel for easy engine configuration. Other configurations can be entered manually. Engine selection and user-defined cabling When selecting an engine from the engine database, user-defined direct cabling can also be configured. As a result it is possible to define the orientation of the cable tracks mounted on the engine and define the output cable harness in the ignition controller. 10

11 Parameter set The MIC ignition controllers offer two parameter sets for the inputs needed to calculate ignition timing, which for example can be used for two-gas engine operation. In addition, the parameter sets can be represented graphically. Parameter set Presentation of the configuration Graphic presentation of parameter sets A and B facilitates rapid visual checking of the values configured. Parameter set Energy settings The ignition spark duration and ignition spark intensity can be set at different ignition voltages with the assistance of the extended energy settings for the start-up phase and normal operation of the engine. 11

12 Example pages run time data Overview You can see the most important current run time data such as speed, ignition timing or system status at a glance in the overview presentation. Breakdown voltage The MICT provides a lot of current and detailed information on the status of every single ignition output. Important data is optically processed, ensuring that irregularities show up immediately; e.g. the secondary voltage is in addition shown as a bar diagram and the type of a misfire is symbolized by a warning light. Warning, error and alarm list The MICT shows a summary of all information, warnings, errors and alarms in a list. Apart from the alarm list and detailed reports, the precise date and time at which a report was included in the list is shown in addition to the operating hours. 12

13 Ignition timing On the left side of the display you see all values and settings that influence the ignition timing. In addition the values are shown and presented as a bar diagram on the right that are pending on the three inputs (potentiometer, analog current and voltage input) and in this way lead to the changes in ignition timing indicated. The value for the speed curve is shown by curve progression set in the configuration. Diagnosis The status display indicates the current error handling condition of the device for CAN bus communication. Example pages self-test Self-test You can carry out a self-test via the MICT to check the sequence of the cabling and connection between the outputs of the ignition controller to the spark plugs. 13

14 Components for MIC Ignition Systems High Tension Leads for NON Shielded Applications PolyMot patented spark plug leads are the most reliable high tension leads in the industry. Made from a combination of Ceramic, Teflon and Silicone they transfer nearly any rate of high energy spark from the coil to the spark plug. Variations for nearly all engine models in combination to spark plugs are available. Extended Spark Plugs For engine applications equipped with extreme tight spark plug well, conventional ignition leads show its limits. The solution is specially designed spark plugs with extended metal housing. XTLPlugs are manufactured with an integrated 7 mm spark plug lead, which allows a direct connection to an externally mounted ignition coil. It can be ordered with different barrel and lead lengths, different lead outputs from the barrel and a wide range of ignition coil connectors. XTL-Plugs are designed for unshielded applications and offer long runtimes. Industrial Spark Plugs Today the industrial gas engine market requests Platinum and Iridium tip electrodes for long spark plug life. High energy coils Ignition coils are becoming steadily more important in modern ignition systems. MOTORTECH provides high energy coils adjusted to controllers. New modern design Use of high quality materials Ideal for the ignition of alternative fuels like biogas Compatible with MOST MOT- Coils MOTORTECH IGNITION COILS 14

15 MOTORTECH LiteRail Wiring Systems The MOTORTECH LiteRail system aluminium profile is delivered pre-assembled for your engine design. Appropriate and pre-fitted ignition coils and the cabling needed via an exchangeable cable distributor simplify the assembly and exchangeability in the event of service. The MOTORTECH Lite Rail is available as a compound system with the MIC3, MIC4 and MIC5. Lite Rail cabling tracks are only available for use in rooms not at risk of explosion (non CSA). DetCon20 MOTORTECH DETONATION CONTROL SYSTEM DetCon20 The DetCon20 control unit offers full protection for gas, diesel and dual fuel engines from 2 to 20 cylinders. Microprocessor controlled, it will detect any detonation in the early stage and will send an analog signal (4-20mA/0-5V) out to the ignition system to retard in a linear function. If detonation cannot be cured a signal will be sent for load reduction and finally an engine STOP signal. CAN Bus interface included. PowerView3 HMI-Module PowerView3 is a compact and flexible HMI module (Human-Machine-Interface) for visualization and operation of MOTORTECHs new generation control units. On more than 25 screens the 7 color display supports the full visualization of the most important operating data of ignition and detonation control as well as the adjustment of various parameters. Error diagnostics can be executed easily on-site without requiring a laptop. The touchscreen guarantees an intuitive navigation through different display pages and menus. The relevant operating data can be easily recorded and stored via USB mass storage device or SD card. The visualization functions have to be activated for every single device. Additional activations or firmware updates are possible at any time. Magnetic Pickup (MPU) Reliable design in a variety of different lengths. Available in standard or CSA certified versions. Hall-Effect Pickup High temperature resistant pickup. Triggers off any magnet. Available in standard or CSA certified versions and both possible polarities. Inductive Pickup Small sensor (M12 thread) for use in applications where there is not much available installation space. It can operate in oil. High temperature resistance. Available in standard or CSA certified versions. 15

16 We aim at your problems! Regardless of which part of the globe we need to travel to. We know that the stakes are high, and therefore we outperform the others. That is because we want everything to run smoothly at your site, everywhere and at any time. This is entirely in keeping up with our motto: Let us drop everything and work on your problem! Distribution partner for DENSO spark plugs MOTORTECH GmbH Hogrevestr Celle, Germany Phone: Fax: motortech@motortech.de Headquarter Office Sales Partner MOTORTECH Americas, LLC 1400 Dealers Avenue, Suite A New Orleans, LA Phone: Fax: info@motortechamericas.com Distributed by: Copyright The copyright for all materials used in this MOTORTECH publication is reserved. Any kind of duplication or use of objects such as pictures or texts in other electronic or printed publications without approval by MOTORTECH is not permitted. 16 P/N EN Rev.08/2015 MOTORTECH SalesFlyer MIC Series Trademark Information MOTORTECH products and the MOTORTECH logo are registered and/or common law trademarks of MOTOR- TECH Holding GmbH. All OEM names and part numbers shown are for reference purposes only. All trademarks, logos and symbols used or shown in this MOTORTECH publication are exclusive objects to the right of their owners and are used for reference purposes only.

MIC4 IGNITION CONTROLLER

MIC4 IGNITION CONTROLLER MIC4 IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.02/2015 MIC4 IGNITION CONTROLLER The economically attractive

More information

MOTORTECH. Ignition Controllers. MIC Series. reliable efficient worldwide

MOTORTECH. Ignition Controllers. MIC Series. reliable efficient worldwide MOTORTECH Ignition Controllers MIC Series reliable efficient worldwide MOTORTECH Ignition Controllers MIC MOTORTECH has developed into one of the leading manufacturers of ignition controllers in the global

More information

DetCon20. DetCon20. Detonation Control System MOTORTECH DETONATION CONTROL SYSTEM

DetCon20. DetCon20. Detonation Control System MOTORTECH DETONATION CONTROL SYSTEM DetCon20 Detonation Control System DetCon20 MOTORTECH DETONATION CONTROL SYSTEM Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.10/2013 DetCon20 MOTORTECH DETONATION

More information

VariStep3 MOTORTECH Stepper Motor Driver Control

VariStep3 MOTORTECH Stepper Motor Driver Control VariStep3 MOTORTECH Stepper Motor Driver Control VariStep3 MOTORTECH STEPPER MOTOR DRIVER CONTROL Join the market leader in industrial ignition. Call the nearest MOTORTECH sales partner for more information.

More information

WAUKESHA VHP P9390 GL

WAUKESHA VHP P9390 GL WAUKESHA VHP P9390 GL Repowering MOTORTECH System Upgrade REV. 06/2013 MOTORTECH System Upgrades reliable efficient worldwide Try the alternative. Call the nearest MOTORTECH sales partner for more information.

More information

Compact Product Guide

Compact Product Guide Compact Product Guide 2012 High Quality Parts and Accessories for Gas Engines REV. 05/2012 P/N 01.00.003-EN IGNITION CONTROLLER MIC4 Motortech Ignition controller The new economically attractive MOTORTECH

More information

MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems

MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems MIC4-ZS Ignition Controller For MWM /DEUTZ Gas Engines with TEM-ZS1 and TEM-ZS3 Ignition Systems MIC4-ZS MOTORTECH IGNITION CONTROLLER Ignition Controller MIC4-ZS MOTORTECH IGNITION CONTROLLER Based on

More information

IGNITION TOOLS & TEST EQUIPMENT

IGNITION TOOLS & TEST EQUIPMENT PRODUCT GUIDE 07 REV. 06/2013 IGNITION TOOLS & TEST EQUIPMENT Chapter 07 07/1 IGNITION TOOLS & TEST EQUIPMENT SparkView MOTORTECH HIGH VOLTAGE INDICATOR The SparkView is a handheld device developed by

More information

APPLICATION GUIDE For CATERPILLAR G3500 Series

APPLICATION GUIDE For CATERPILLAR G3500 Series APPLICATION GUIDE For CATERPILLAR G3500 Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Coils Ignition Coils Flange ignition coil For unshielded and shielded applications For G3508,

More information

COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines

COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines COMPACT PRODUCT GUIDE High Quality Parts and Accessories for Gas Engines GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Systems The MOTORTECH Ignition Controller Platform MOTORTECH has devolved

More information

Ignition Coils. Ignition Coils. For CATERPILLAR Gas Engines G3400, G3500, G3600 & GCM34 Series. reliable efficient worldwide

Ignition Coils. Ignition Coils. For CATERPILLAR Gas Engines G3400, G3500, G3600 & GCM34 Series. reliable efficient worldwide Ignition Coils For CATERPILLAR Gas Engines G00, G500, G600 & GCM Series Ignition Coils reliable efficient worldwide G00 & G500 Series Engines Ignition Coils Features For Non CSA Applications 1 Reinforced

More information

MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines

MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines MOTORTECH Throttle Bodies For WAUKESHA VHP G/ GSI/ LT 6 & 12 Cylinder Engines Join the market leader in industrial ignition. Call the nearest MOTORTECH sales partner for more information. MOTORTECH Throttle

More information

Integral Ignition Coils For Shielded Applications

Integral Ignition Coils For Shielded Applications Integral Ignition Coils For Shielded Applications GAS ENGINE TECHNOLOGY reliable efficient worldwide Integral Ignition Coils Slim Design General Features Primary connector pole for ALTRONIC compatibility

More information

SCOPELITE TIMING LIGHT OPERATING MANUAL

SCOPELITE TIMING LIGHT OPERATING MANUAL SCOPELITE TIMING LIGHT OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.020-EN Rev. 11/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and

More information

VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer. VariFuel2 MOTORTECH AIR/GAS MIXER

VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer. VariFuel2 MOTORTECH AIR/GAS MIXER VariFuel2/VariFuel2+ MOTORTECH Air/Gas Mixer VariFuel2 MOTORTECH AIR/GAS MIXER General Information VariFuel2 MOTORTECH AIR/GAS MIXER MOTORTECH s VariFuel2 is a high-tech variable Venturi type air/gas mixer

More information

APPLICATION GUIDE For CATERPILLAR G3400 Series

APPLICATION GUIDE For CATERPILLAR G3400 Series APPLICATION GUIDE For CATERPILLAR G3400 Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Controllers MIC3+ Series Ignition Controllers High energy ignition controller for retrofits Plug

More information

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing PHLOX II Ignition Control Systems Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Increased spark plug durability Easy integration via CAN On-board

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 140-65 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-140-65-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 200-120 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-200-120-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines Features VariSpark Spark Profile Control Users can select from one of six VariSpark spark energy profiles embedded within the

More information

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES n State-of-the-art, crankshaft-referenced digital ignition system for natural-gas fueled integral compressor engines n Innovative

More information

MIC4 IGNITION CONTROLLER OPERATING MANUAL

MIC4 IGNITION CONTROLLER OPERATING MANUAL MIC4 IGNITION CONTROLLER OPERATING MANUAL MOTORTECH Ignition Controllers P/N 01.10.010-EN Rev. 04/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

APPLICATION GUIDE For WAUKESHA VHP Series

APPLICATION GUIDE For WAUKESHA VHP Series APPLICATION GUIDE For WAUKESHA VHP Series GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Controllers & Harnesses MIC3+CEC Ignition Controllers High energy retrofit ignition controller 1) More

More information

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES New Backward-Compatible Enhanced CPU-95 Display Now Available CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES Microprocessor-based, crankshaft referenced digital ignition system for medium-sized

More information

MIC5 IGNITION CONTROLLER OPERATING MANUAL

MIC5 IGNITION CONTROLLER OPERATING MANUAL MIC5 IGNITION CONTROLLER OPERATING MANUAL MOTORTECH Ignition Controllers P/N 01.10.023-EN Rev. 04/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL

SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL SPARKSCAN1 HIGH VOLTAGE CLAMP OPERATING MANUAL MOTORTECH Tools & Test Equipment for Ignition Systems P/N 01.10.019 Rev. 01/2013 Copyright Copyright 2012 MOTORTECH GmbH. All rights reserved. Distribution

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS WARNING: WARNING: www.altronicinc.com DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY TO LEAD IMPROPER TO IMPROPER OP- ERATION OF ENGINE THE MACHINE

More information

Catalysts For Efficient and Reliable Emission Reduction

Catalysts For Efficient and Reliable Emission Reduction Catalysts For Efficient and Reliable Emission Reduction Exhaust Gas Aftertreatment reliable efficient worldwide General Information Catalysts For Efficient and Reliable Emission Reduction Increasingly

More information

APPLICATION GUIDE For MWM /DEUTZ Gas Engines

APPLICATION GUIDE For MWM /DEUTZ Gas Engines APPLICATION GUIDE For MWM /DEUTZ Gas Engines GAS ENGINE TECHNOLOGY reliable efficient worldwide Ignition Coils Ignition Coils ALTRONIC Style ignition coil (+) ground For use with D.I.S. ignition controllers

More information

Sensors & Controls. Everything you wanted to know about gas engine ignition technology but were too afraid to ask.

Sensors & Controls. Everything you wanted to know about gas engine ignition technology but were too afraid to ask. Everything you wanted to know about gas engine ignition technology but were too afraid to ask. Contents 1. Introducing Electronic Ignition 2. Inductive Ignition 3. Capacitor Discharge Ignition 4. CDI vs

More information

Installation Instructions

Installation Instructions Installation Instructions CD200EVS Digital Ignition System Form CD200EVS II 8-14 1.0 DESCRIPTION 1.1 This manual provides installation and operating instructions for the Altronic CD200EVS ignition system.

More information

DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL

DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL MOTORTECH Gas Engine Control P/N 01.30.002 Rev. 11/2011 Copyright Copyright 2011 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of

More information

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing

PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing PHLOX II Ignition Control Systems Certified Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Adjustable ignition energy reduces spark plug wear

More information

SPARK PLUG CLEANING KIT OPERATING MANUAL

SPARK PLUG CLEANING KIT OPERATING MANUAL SPARK PLUG CLEANING KIT OPERATING MANUAL Spark Plugs - Tools & Accessories P/N 01.20.002 Rev. 08/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction of this

More information

Installation and Operating Manual

Installation and Operating Manual Installation and Operating Manual NGI-1000 Digital Ignition System Form NGI-1000 IOM 10-17 1.0 DESCRIPTION 1.1 This manual provides installation and operating instructions for the Altronic NGI- 1000 ignition

More information

DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL

DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL DETCON DETONATION CONTROL SYSTEM OPERATING MANUAL MOTORTECH Gas Engine Management P/N 01.30.002 Rev. 07/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

SECTION 2.10 IGNITION SYSTEM DESCRIPTION CEC IGNITION MODULE SYSTEM MAGNETO IGNITION SYSTEM

SECTION 2.10 IGNITION SYSTEM DESCRIPTION CEC IGNITION MODULE SYSTEM MAGNETO IGNITION SYSTEM SECTION 2.10 SYSTEM DESCRIPTION CEC SYSTEM The Custom Engine Control (CEC) Ignition Module is located on the engine's left side (see Figure 2.10-1 and Figure 2.10-2). The CEC Ignition Module system consists

More information

Installation Instructions

Installation Instructions Installation Instructions CD200D Digital Ignition System Form CD200D II 8-14 1.0 DESCRIPTION 1.1 This manual provides installation and operating instructions for the Altronic CD200D ignition system. It

More information

PowerCommand 3300 Control Panel. Our Energy Is Working For You.

PowerCommand 3300 Control Panel. Our Energy Is Working For You. PowerCommand 3300 Control Panel. Our Energy Is Working For You. PowerCommand Control Panel. The PowerCommand Control Panel (PCC 3300) is a microprocessor-based Drilling Power Module (DPM) monitoring, metering

More information

IGNITION SYSTEM COMPONENTS AND OPERATION

IGNITION SYSTEM COMPONENTS AND OPERATION 69 IGNITION SYSTEM COMPONENTS AND OPERATION Figure 69-1 A point-type distributor from a hot rod being tested on a distributor machine. WARNING: The spark from an ignition coil is strong enough to cause

More information

Unidrive M600 High performance drive for induction and sensorless permanent magnet motors

Unidrive M600 High performance drive for induction and sensorless permanent magnet motors Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad

More information

Installation Instructions

Installation Instructions Installation Instructions CD200D Digital Ignition System Form CD200D II 4-17 1.0 DESCRIPTION 1.1 This manual provides installation and operating instructions for the Altronic CD200D ignition system. It

More information

Ignition System Fundamentals

Ignition System Fundamentals Ignition System Fundamentals Chapter 37 Objectives Describe the functions of ignition system parts Explain the operation of points, electronic, and computer ignition systems Give an overview of the different

More information

Welcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module.

Welcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module. Welcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module. 1 Upon the completion of this module, you will be able to describe the

More information

AC Induction Motor Controller with VCL

AC Induction Motor Controller with VCL Motor Controllers AC Induction Motor Controller with VCL www.curtisinstruments.com 1 The Ultimate Class III Truck Control System: Superb Performance and Value This new AC induction motor controller (inverter)

More information

Energy, the Environment and Transportation Natural Gas Reciprocating Engine Technolgy July 24, 2012

Energy, the Environment and Transportation Natural Gas Reciprocating Engine Technolgy July 24, 2012 Energy, the Environment and Transportation Natural Gas Reciprocating Engine Technolgy July 24, 2012 Introduction 2 Dave Petruska Engineering Manager at Woodward Licensed Professional Engineer (PE) BS and

More information

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System Table of contents 1. WARNINGS AND LEGAL INFORMATION... 3 3.5 LEGAL INFORMATION AND RESPONSIBILITY... 3 3.6 ELECTROSTATIC DISCHARGE AWARENESS... 3 3.7 SAFETY ISSUES... DELOMATIC 400 GAS 3 3.8 DISCLAIMER...

More information

INTELLITROL. scully. Scully s Intellitrol System. Intellitrol is a state of the art microprocessor based system that provides:

INTELLITROL. scully. Scully s Intellitrol System. Intellitrol is a state of the art microprocessor based system that provides: INTELLITROL Overfill Prevention Control Unit with Optional Ground Verification and Vehicle Identification Features. Scully s Intellitrol System is the most advanced terminal overfill prevention and ground

More information

Diesel generator set B3.3 series engine 44 kva - 66 kva 50 Hz 40 kw - 60 kw 60 Hz

Diesel generator set B3.3 series engine 44 kva - 66 kva 50 Hz 40 kw - 60 kw 60 Hz Specification sheet Diesel generator set B3.3 series engine 44 kva - 66 kva 50 Hz 40 kw - 60 kw 60 Hz Description This Cummins Power Generation commercial generator set is a fully integrated power generation

More information

MAGNA T SERVO. 500 to 5,500 kn

MAGNA T SERVO. 500 to 5,500 kn MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable

More information

SINAMICS GM150 IGCT version

SINAMICS GM150 IGCT version /2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions

More information

ATOTH-G Series BLDC Motor Controller. User s Manual

ATOTH-G Series BLDC Motor Controller. User s Manual ATOTH-G Series BLDC Motor Controller User s Manual Contents Chapter One Summary...1 Chapter Two Main Features and Specifications.2 2.1 Basic Functions...2 2.2 Features... 5 2.3 Specifications...6 Chapter

More information

MAX-FIRE AND E-FIRE ELECTRONIC DISTRIBUTORS

MAX-FIRE AND E-FIRE ELECTRONIC DISTRIBUTORS INSTALLATION INSTRUCTIONS MAX-FIRE AND E-FIRE ELECTRONIC DISTRIBUTORS NOTE: This product is applicable to pre-1966 California and pre-1968 federally certified passenger cars. It is also applicable to non-emission

More information

Kelly HSR Series Motor Controller with Regen User s Manual V 3.3. Kelly HSR Opto-Isolated Series Motor Controller with Regen.

Kelly HSR Series Motor Controller with Regen User s Manual V 3.3. Kelly HSR Opto-Isolated Series Motor Controller with Regen. Kelly HSR Opto-Isolated Series Motor Controller with Regen User s Manual HSR72601 HSR72801 HSR12401 HSR12601 HSR12901 HSR14301 HSR14501 HSR14701 Rev.3.3 Dec. 2011 Contents Chapter 1 Introduction... 2 1.1

More information

SECTION 4.10 IGNITION SYSTEM MAINTENANCE IGNITION SYSTEM MAINTENANCE

SECTION 4.10 IGNITION SYSTEM MAINTENANCE IGNITION SYSTEM MAINTENANCE SECTION 4.10 IGNITION SYSTEM MAINTENANCE IGNITION SYSTEM MAINTENANCE Inspect and test ignition coils once each year. Remove all oil, grease and dirt from the ignition coils. Pay particular attention to

More information

Diesel Generator Set S3.8 Series Engine

Diesel Generator Set S3.8 Series Engine Diesel Generator Set S3.8 Series Engine > Specification Sheet 44 kva 66 kva 50Hz 40 kw 60 kw 60Hz Description This Cummins Power Generation commercial generator set is a fully integrated power generation

More information

UAV engine EFI components Specifications Manual

UAV engine EFI components Specifications Manual UAV engine EFI components Specifications Manual -In miniature sizes - For 20cc to 300cc engines V1.7 COPY RIGHTS ECOTRONS LLC ALL RIGHTS RESERVED Http://www.ecotrons.com Note: If you are not sure about

More information

DTC P0341 Camshaft Position (CMP) Sensor Performance

DTC P0341 Camshaft Position (CMP) Sensor Performance Page 1 of 5 1999 Buick Century Century, Regal VIN W Service Manual Document ID: 345654 DTC P0341 Camshaft Position (CMP) Sensor Performance Circuit Description During cranking, the Ignition Control Module

More information

True Fail-Safe Technology and Precision Control for Reliable Shutdown

True Fail-Safe Technology and Precision Control for Reliable Shutdown True Fail-Safe Technology and Precision Control for Reliable Shutdown RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation Technology for Critical Fail-Safe and

More information

Operating Instructions

Operating Instructions Operating Instructions CPU-XL VariSpark Digital Ignition System with Enhanced Display Form 1.0 OVERVIEW 1.1 The Altronic CPU-XL VariSpark Digital Ignition with enhanced display is a DCpowered, microprocessor-based,

More information

HGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION...

HGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION... CONTENT 1. SUMMARY...4 2. PERFORMANCE AND CHARACTERISTICS...4 3. SPECIFICATION...5 4. OPERATION...6 4.1. DISPLAY PANEL...6 4.2. LCD ICON INSTRUCTION...7 4.3. DISPLAY INSTRUCTIONS...7 4.4. DISPLAY DESCRIPTION...8

More information

CPi. CoiL PACK IGNiTioN FOR AViATiON. For 4,6 and 8 cylinder 4 stroke applications. Please read the entire manual before beginning installation.

CPi. CoiL PACK IGNiTioN FOR AViATiON. For 4,6 and 8 cylinder 4 stroke applications. Please read the entire manual before beginning installation. 1 CPi CoiL PACK IGNiTioN FOR AViATiON Coil pack (4 cylinder) Coil pack (6 cylinder) For 4,6 and 8 cylinder 4 stroke applications. Please read the entire manual before beginning installation. Software version

More information

Automatic DC Power Supply/Battery Charger

Automatic DC Power Supply/Battery Charger Automatic DC Power Supply/Battery Charger PATENTED U.S. 9,270,140; 9,385,556; 9,413,186; 9,509,164 NEW in 2015: Field selectable AC input voltage in high-powered units Automatic battery commissioning mode

More information

HGM1780. Automatic Genset Controller USER MANUAL. Smartgen Technology

HGM1780. Automatic Genset Controller USER MANUAL. Smartgen Technology HGM1780 Automatic Genset Controller USER MANUAL Smartgen Technology Smartgen Technology Co., Ltd No. 28 Jinsuo Road Zhengzhou Henan Province P. R. China Tel: 0086-371-67988888/67981888 0086-371-67991553/67992951

More information

EVO AT SERIES BATTERY CHARGER

EVO AT SERIES BATTERY CHARGER EVO AT SERIES BATTERY CHARGER AT SERIES BATTERY CHARGER P R O D U C T PATENT PENDING hindlepowerinc.com 610-330-9000 Evo AT Series battery charger designed with YOU in mind. Evo AT Series battery charger

More information

Digital Engine Tachometer

Digital Engine Tachometer Digital Engine Tachometer CT-6700 Compact and portable design Compact Tachometer for various engine measurement The CT-6700 is a digital engine tachometer to measure rotation speed of gasoline/diesel engines,

More information

Symmetra PX. Industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments

Symmetra PX. Industry-leading efficiency, availability, and performance for small, medium, and large data centers and mission critical environments Symmetra PX Scalable from 10 kw to 500 kw Parallel-capable up to 2,000 kw High performance, right-sized, modular, scalable, three-phase power protection with ultra high availability and efficiency for

More information

Innovative product solutions for vehicle automation applications

Innovative product solutions for vehicle automation applications Innovative product solutions for vehicle automation applications R www.ifmefector.com fluid and diagnostic sensors networking and controls position sensors and object evaluation ifm efector close to you!

More information

HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic

HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 4 3. SPECIFICATIONS... 5 4. OPERATION... 6 5. PROTECTION...

More information

ARCAPRO positioner. Positioner customized for specific tasks

ARCAPRO positioner. Positioner customized for specific tasks ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,

More information

THYRO-PX SERIES DIGITAL THYRISTOR SCR POWER CONTROLLER UP TO 2900 AMPS

THYRO-PX SERIES DIGITAL THYRISTOR SCR POWER CONTROLLER UP TO 2900 AMPS DIGITAL THYRISTOR SCR POWER CONTROLLER UP TO 2900 AMPS The Thyro-PX series are modular, easy-to-use premier performance SCR power controllers for heating elements, resistive loads and transformer loads,

More information

Electronic Park Brake, Service & Reset Tool. User Guide

Electronic Park Brake, Service & Reset Tool. User Guide 30662000 Electronic Park Brake, Service & Reset Tool User Guide Produced by the Manufacturer All rights reserved. This publication may not be reproduced, in full or in part, without the express written

More information

GEISLINGER MONITORING

GEISLINGER MONITORING GEISLINGER MONITORING GEISLINGER MONITORING The Geislinger Monitoring System (GMS) is a continuous monitoring and measuring system for rotating components. It is intended for use in a wide range of applications,

More information

DISTRIBUTORLESS IGNITION SYSTEM Installation and Adjustment Instructions

DISTRIBUTORLESS IGNITION SYSTEM Installation and Adjustment Instructions DISTRIBUTORLESS IGNITION SYSTEM Installation and Adjustment Instructions 1.0 INTRODUCTION: Congratulations on your purchase of a Holley Distributorless Ignition System! Holley cannot and will not be responsible

More information

INSTALLATION INSTRUCTIONS. Revision 4.0.3

INSTALLATION INSTRUCTIONS. Revision 4.0.3 INSTALLATION INSTRUCTIONS Revision 4.0.3 Table of Contents INTRODUCTION... 3 INSTALLATION OVERVIEW... 4 Included Parts... 5 DEVICE WIRING... 6 Required Parts... 6 Guidelines... 6 Wiring Diagram... 7 Engine

More information

Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids

Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement

More information

User Manual Solar Charge Controller 3KW

User Manual Solar Charge Controller 3KW User Manual Solar Charge Controller 3KW Version: 1.3 CONTENTS 1 ABOUT THIS MANUAL... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 SAFETY INSTRUCTIONS... 1 2 INTRODUCTION... 2 2.1 Features... 2 2.2 Product Overview...

More information

Spark-ignited generator set

Spark-ignited generator set Specification sheet Spark-ignited generator set 20-40 kw EPA emissions Description Cummins generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 10.570 TECHNISCHE HANDELSONDERNEMING BV INSTALLATION INSTRUCTIONS RAIL INSTALLATION AND APPLICATION MANUAL * SPARE PARTS OVERVIEW * ALTRONIC CD200 IGNITION INSTALLATION INSTRUCTIONS HATRACO IGNITION PACKAGES

More information

Engine Management and Data Acquisition Systems

Engine Management and Data Acquisition Systems Engine Management and Data Acquisition Systems In 2013 FuelTech celebrates ten years of innovative success and, although young, it has become a synonym of quality high performance. The company was created

More information

INSTALLATION INSTRUCTIONS. Revision 3.1.1

INSTALLATION INSTRUCTIONS. Revision 3.1.1 INSTALLATION INSTRUCTIONS Revision 3.1.1 Table of Contents INTRODUCTION... 4 INSTALLATION OVERVIEW... 5 Included Parts... 6 DEVICE WIRING... 7 Required Parts... 7 Guidelines... 7 Wiring Diagram... 8 Compatible

More information

Solenoid interlock AZM 200 The non-contact interlock.

Solenoid interlock AZM 200 The non-contact interlock. Solenoid interlock AZM 200 The non-contact interlock. Solenoid interlock AZM 200 The non-contact Solenoid interlocks demand accurate alignment of actuator and device. This requirement is met on new machinery.

More information

PowerCommand 500/550 Remote Monitoring System

PowerCommand 500/550 Remote Monitoring System PowerCommand 500/550 Remote Monitoring System Complete remote monitoring of your power system The PowerCommand 500 series provides a convenient means of remotely monitoring generator sets, transfer switches,

More information

Kelly KDHA High Voltage Series/PM Motor Controller User s Manual

Kelly KDHA High Voltage Series/PM Motor Controller User s Manual Kelly KDHA High Voltage Series/PM Motor Controller User s Manual KDH07500A KDH07501A KDH07700A KDH07701A KDH09400A KDH09401A KDH09500A KDH09501A KDH12400A KDH12401A KDH12500A KDH12501A KDH14300A KDH14301A

More information

Level Measurement Point level measurement - RF Capacitance switches

Level Measurement Point level measurement - RF Capacitance switches Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable

More information

PRODUCT GUIDE CMVWXA0

PRODUCT GUIDE CMVWXA0 PRODUCT GUIDE DOCUMENT NUMBER REVISION DATE 20181116 NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either

More information

AT SERIES EVO BATTERY CHARGER

AT SERIES EVO BATTERY CHARGER AT SERIES EVO BATTERY CHARGER AT SERIES BATTERY CHARGER P R O D U C T hindlepowerinc.com 610-330-9000 AT Series evo. A battery charger designed with YOU in mind. AT Series evo is HindlePower s next generation

More information

Fixed Right First Time. Volvo Technicians, Service and Parts Managers

Fixed Right First Time. Volvo Technicians, Service and Parts Managers Tech-Net Notes Fixed Right First Time Volvo Technicians, Service and Parts Managers NO: 25-19 DATE: 6-30-2004 MODEL: 960-S/V90/850/S70/V70/C70 M. YEAR: 1996-1998 SUBJECT: Establishing Readiness for OBD

More information

SmartON / SmartON+ Installation and Use Manual

SmartON / SmartON+ Installation and Use Manual SmartON / SmartON+ Installation and Use Manual Rev. Date Ver. Ver. Notes document document SmartON SmartViewII 1.0 06/04/2007 3.08 2.30 Pre-release 1.01 10/04/2007 3.08 2.30 Release 1.02 04/10/2007 3.09

More information

Original Operating Manual

Original Operating Manual 2010-10-29 Original Operating Manual Control Panel Comfort for Pedelecs Series 4313 Save for future use! Marquardt GmbH Schlossstraße 16 78604 Rietheim-Weilheim E-mail: marquardt@marquardt.de Website:

More information

EZECU - EzFi Starter ECU Standalone 3D Programmable Fuel Injection Computer for BOSCH Compliant EFI Systems

EZECU - EzFi Starter ECU Standalone 3D Programmable Fuel Injection Computer for BOSCH Compliant EFI Systems EZECU - EzFi Starter ECU Standalone 3D Programmable Fuel Injection Computer for BOSCH Compliant EFI Systems User s Manual January, 2012 Version 2.00 Copyright Copyright IC Leader Technology Corporation,

More information

ATASA 5 th. ATASA 5 TH Study Guide Chapter 27 Pages Ignition Systems 68 Points. Please Read the Summary

ATASA 5 th. ATASA 5 TH Study Guide Chapter 27 Pages Ignition Systems 68 Points. Please Read the Summary ATASA 5 TH Study Guide Chapter 27 Pages 810 835 68 Points Please Read the Summary Before We Begin Keeping in mind the Career Cluster of Transportation, Distribution & Logistics Ask yourself: What careers

More information

Industrial Diesel Generator Set KD3500-F 50 Hz Fuel Consumption Optimized

Industrial Diesel Generator Set KD3500-F 50 Hz Fuel Consumption Optimized RATINGS 400 V - 50 Hz Standby kva 3500 KWe 2800 Prime kva 3182 KWe 2546 Benefits & features premium quality provides one source responsibility for the generating system and accessories The generator set,

More information

E-124. Electric Cylinders EAC Series. AZ/AR Equipped. Features Compact and Powerful! E-124

E-124. Electric Cylinders EAC Series. AZ/AR Equipped. Features Compact and Powerful! E-124 E-14 Cylinders Technical reference Page H-1 Regulations & Standards Page I- AR The motor component incorporates a high-efficiency, energy-saving Series electric cylinder. In addition

More information

info The intelligent control concept W-FM 100 and W-FM 200 combustion managers Information on digital combustion management

info The intelligent control concept W-FM 100 and W-FM 200 combustion managers Information on digital combustion management info Information on digital combustion management The intelligent control concept W-FM 100 and W-FM 200 combustion managers 2 Digital combustion management Modern gas, oil and dual fuel burners use combustion

More information

Spark-ignited generator set

Spark-ignited generator set Specification sheet Spark-ignited generator set 20 40 kw standby EPA emissions Description Cummins Power Generation generator sets are fully integrated power generation systems providing optimum performance,

More information

DGC-2020 DIGITAL GENSET CONTROLLER

DGC-2020 DIGITAL GENSET CONTROLLER DIGITAL GENSET CONTROLLER Basler Electric s Digital Genset Controller (DGC-2020) is a highly advanced integrated genset control system. The DGC-2020 is perfectly focused, combining rugged construction

More information

More Precision. mainsensor Magneto-inductive displacement sensor

More Precision. mainsensor Magneto-inductive displacement sensor More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative

More information

The engine is running. DTC P0351, P0352, P0353, and P0354 run continuously once the above condition has been met.

The engine is running. DTC P0351, P0352, P0353, and P0354 run continuously once the above condition has been met. Page 1 of 6 DTC P0351-P0354 Circuit Description DTCs P0351 through P0354 Ignition Coil Primary/Secondary Feedback Circuit diagnostic monitors the primary circuitry of individual ignition coils for the

More information

Diesel generator set. 20 kw EPA emissions stationary Standby. Specification sheet. Description. Features

Diesel generator set. 20 kw EPA emissions stationary Standby. Specification sheet. Description. Features Specification sheet Diesel generator set 20 kw EPA emissions stationary Standby Description Cummins generator sets are fully integrated power generation systems providing optimum performance, reliability

More information