Power Clear Snowthrower

Transcription

1 Form Number Rev A Power Clear Snowthrower Model No and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and the description of each part desired. Understanding Reference Numbers Each Identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration. Service Assembly Reference Numbers Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustrations and in part lists. Reference Numbers Indicating Quantity In an illustration, if a reference number indicates more than one part, the reference number has the form nx y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated. Register your product at The Toro Company All Rights Reserved

2 Contents Description Page Rotor Housing and Scraper Assembly Rotor Drive Assembly Chute Assembly Rotor Assembly Engine, Frame and Wheel Assembly Shroud, Control Panel and Gas Tank Assembly Handle Assembly Part Description Abbreviations Part descriptions in this catalog may include the following abbreviations. AR as required ASM assembly BBC blade brake clutch CARR carriage DEG degrees EXT external FH flat head GA gauge HD heavy-duty HF hex flange HH hex head HHF hex head flange HHFTF hex head flange thread forming HJ hex jam HLH hex lag head HOC height-of-cut HSBH hex socket button head HSFH hex socket flat head HSH hex socket head HWH hex washer head HWHTF hex washer head thread forming Footnotes Not illustrated Obtain from your local Tecumseh dealer Description Quick Turn Assembly Carburetor Assembly No B Tecumseh LH195SP-67529D Engine Assembly No. 1 Tecumseh LH195SP D Engine Assembly No. 2 Tecumseh LH195SP D Recoil Starter No Tecumseh LH195SP-67529D HYD hydraulic LH left hand NI nylon insert NPTF national pipe thread fine PFH phillips flat head PPH phillips pan head PPHTF phillips pan head thread forming PRH phillips round head PTH phillips truss head PTO power-take-off RH right hand ROPS roll-over protection system SFH slotted fillister head SHH slotted hex head SHWH slotted hex washer head SPH slotted pan head SQH square head SRH slotted round head STD standard TAP self tapping TTH torx truss head Not serviced separately Included in Repair Kit B Page

3 Rev A Clip Screw-HWHTF Screw-HWHTF Flange-Bearing Screw-HWH Bolt-Wheel Nut-Lock, NI Blade-Scraper Spacer-Bearing, RH Washer-Rubber Bearing-Ball Washer-Thrust Screw-HWH Housing-Auger Screw-PPH Brace-Frame Guide-Cable, Clutch Spring-Extension Screw-HWH Chute-Lower Rotor Housing and Scraper Assembly 3

4 Rev A Screw-HHF Clip-Spring, Brake Washer Bushing-Pivot Nut-Lock, NI Rotor Pulley ASM Washer-Belleville Screw-HH Screw-HWH Cover-Belt Belt-Drive Screw-HH Pulley-Idler Cable-Clutch Arm-Idler Nut-Lock, Cone Spring-Extension Rotor Drive Assembly 4

5 Rev A Trigger-Deflector Deflector Screw-HWH Hinge-Ratchet, Deflector Seal-Deflector Pin-Hinge, Deflector Chute Screw-HH Spacer-Sleeve, Pinion Pinion-Gear Bracket-Pinion Retainer-Cable Nut-Lock, NI Ring-Support, Chute Ring-Chute, Gear Retainer-Ring, Chute Screw-HWH Screw-Plastite Spring-Compression Chute Assembly 5

6 Rev A Spacer-Blade, Rotor Half-Rotor Screw-HH Nut-Lock, NI Screw-HH Blade-Rotor Screw Rotor Rotor Assembly 6

7 Rev A 1 1 Engine-Tecumseh, LH195Sp67529D Screw-HH Plate-Engine, PTO Washer-Belleville Screw-HH Support-Engine, Side Screw-HWHTF Pulley-Engine, 4 Cycle Wheel Nut-Push Screw-HSH Screw-SQH Nut-HF Support-Engine Bellcrank-Choke, 4 Stroke Link-Choke Knob, L-Head Strap-Tie Engine, Frame and Wheel Assembly 7

8 Rev A 9 Shroud, Control Panel and Gas Tank Assembly Cycle Gas Cap ASM Screw-PPH, Sems Shroud ASM 3: Baffle-Heat, 4-Cycle 3: Screw-PPH Screw-Plastite Seal-Tank Tank-Gas Clamp Hose-Fuel Screw-HWH Clip-Shroud Shroud-Lower Clip Screw-PPH Washer-Flat Knob-Choke Switch Body-Primer Key-Ignition Bulb-Primer Seal-Ring, Chute Screw-PPH 8

9 Rev A Upper Handle ASM 1: Decal-Drive, Rotor Bail-Control Cover-Spring Spring-Extension Adjuster-Cable, Clutch Lock-Handle Handle-Lower Washer Knob-Handle Nut-Lock NI Guide-Rope Recoil-Handle Handle Assembly 9

10 Rev A Screw-HWH Clamp-Cable Handle-Slider, RH Cable-Chute, Short Cable-Chute, Long Cover-Pulley Screw-HWH Pulley-Slider Screw-Handle Track-Slider Washer Nut-Lock, NI Spring Plate-Lock, Chute Handle-Slider, LH Screw-PPH Trigger Bracket-Cable Quick Turn Assembly 10

11 E Rev A Carburetor Assembly No B Tecumseh LH195SP-67529D B 1 Carburetor Throttle Shaft And Lever ASM Spring-Return, Throttle Shutter-Throttle Screw-Shutter Choke Shaft And Lever ASM Shutter-Choke Spring-Positioning, Choke Fitting-Inlet, Fuel Screw-Throttle Crack And Idle Speed Spring-Tension Screw-Restrictor, Idle 20A Cap-Screw, Idle Restrictor Bowl-Float (No Drain) Float Bowl ASM Shaft-Float Float (Plastic) O Ring-Bowl, Float A 1 Inlet Needle, Seat And Clip ASM (Includes 31) Clip-Spring A 1 Bowl Drain ASM (Before 1/1/2006) Gasket-Plunger, Drain (Before 1/1/2006) Tube-Nozzle, Main O-Ring Nut-Bowl, High Speed A 1 Washer-Nut, Bowl Plug-Welch, Idle Mixture Well Plug-Welch, Atmospheric Vent B 1 Carburetor Repair Kit Gasket 11

12 Rev A Engine Assembly No. 1 Tecumseh LH195SP-67529D E1 12

13 A 1 Cylinder ASM (Includes 2, 20, 72, 125) Pin-Dowel Washer-Flat Rod-Governor Chute Idler Arm ASM Clamp-Lever, Governor Screw (T-15, 8-32 X 19/64) Spring-Extension Seal-Oil Baffle-Housing, Blower 25A Extension-Baffle Crankshaft Piston, Pin And Ring Set (.010 O S) (Includes 41-43) Piston, Pin And Ring Set (STD) (Includes 41-43) Ring Set (.010 O S) Ring Set (STD) Ring-Retaining, Piston Pin A 1 Connecting Rod ASM (Includes 46, 49) A 2 Bolt-Rod, Connecting Lifter-Valve Dipper-Oil Camshaft (M C R) 64A Washer Screw (10-24 X 9/16) A 1 Gasket-Cover, Cylinder B 1 Cover-Cylinder (Includes 75-83, 311) Plug-Drain, Oil (SQH 1/4-18) 72A Plug-Pipe (Internal Hex, 1/4-18) Seal-Oil A 1 Shaft-Governor A 1 Washer-Flat Governor Gear ASM A 1 Spool-Governor Ring-Retaining Screw (1/4-20 X 1-1/4) Key-Flywheel Flywheel Washer-Belleville Nut-Flywheel Nut (10-32) A 1 Bolt-Adjusting, R.P.M C 1 Ignition-State, Solid Cover-Spark Plug Stud-Mounting, Solid State Screw (T-15, X 15/16) 103A Screw (10-32 X 1/2) Wire-Ground Gasket-Head, Cylinder Engine Assembly No. 1 Tecumseh LH195SP-67529D Head-Cylinder (Includes 130A) Valve-Exhaust (1/32 O S) (Includes 151) Valve-Exhaust (STD) (Includes 151) A 1 Valve-Intake (1/32 O S) (Includes 151) A 1 Valve-Intake (STD) (Includes 151) Washer-Flat A 2 Screw (5/16-18X1-1/2) 130A A 5 Screw (5/16-18 X 2) 130B Screw (1/4-20 X 1/2) Spark Plug-Resistor (R J19 L M) 13

14 Rev A Engine Assembly No. 2 Tecumseh LH195SP-67529D E2 14

15 Spring-Valve Cap-Valve, Spring Screw (T-30, 1/4-20X1/2) A 2 Gasket-Cover, Valve Body-Breather Element-Breather Cover-Breather Tube-Breather Nut And Lock Washer (1/4-28) Screw (1/4-28 X 1-11/16) Screw (1/4-28 X 7/8) A 1 Bracket-Choke Gasket (Carburetor To Intake Pipe) Pipe-Intake Link-Governor To Throttle 200A Bracket-Adjusting Bolt, Governor Spring 209C Washer-Lock Rod-Choke Screw (10-32 X 15/32) Screw (1/4-20 X 1-19/32) A 1 Gasket-Intake Weight-Release, Compression Spring-Release, Compression A 1 Housing-Blower 264A Screw (1/2-20X5/8) Gasket-Exhaust Muffler (Includes 274) Screw (1/4-20 X 2-1/2) B 1 Cup-Starter Screw (8-32 X 21/64) Line-Fuel, Low Permeation (16.0) Clamp-Line, Fuel Filter-Fuel (Includes 292) 309A Screw (10-24 X 3/4) 310A Dipstick (Includes 312) Plug-Fill, Oil (Includes 312) Gasket-Plug, Oil Fill Spacer Screw (10-24 X 3/8) B 1 Cover-Carburetor Screw (8-32 X 5/16) Bracket-Cover, Carburetor 364A Plate-Locking Decal-Tecumseh Logo For Top Of Recoil Starter B 1 Carburetor Starter-Recoil Gasket Set A 1 Oil-Engine, S A E 5W Washer Screw ( 5/16-18 X 1-1/2) Engine Assembly No. 2 Tecumseh LH195SP-67529D Winter Maintenance Kit (Includes S A E 5W30 Engine Oil) A 1 Replacement-Block, Short 15

16 Rev A E Starter-Recoil (Winter Pulley, Handle Not Included) Pulley And Rewind Spring ASM Repair Kit Rope-Starter (98 Cut To Length) Recoil Starter No Tecumseh LH195SP-67529D 16

17 NOTES

18 NOTES

19 NOTES

20