MIL-DTL-22992, Class L

Size: px
Start display at page:

Download "MIL-DTL-22992, Class L"

Transcription

1 mphenol ML-DTL-22992, lass L TLE OF OTET HEVY DUTY, ML-DTL-22992, L L OETOR roduct Features, enefits and pecifications. 462 roduct ntroduction, Features. 463 nsert rrangements. 464, 465 lternate ing. 466 How to Order. 467 tyles: Wall Mount Receptacle (power source) M (L) traight lug M (L) able onnecting Receptacle without oupling Ring M (L) Wall Mount lug with oupling Ring (equipment end) M (L) ontacts, ccessories / nstallation nstructions ontacts, ontact ushings train Reliefs, ealing lands, rotection aps. 473 nstallation nstructions ML-DTL-22992, lass L onnector Typical Markets: ower enerators / ir onditioning Units round Missile ystems Military helters / Military ommunication enters Medical Units mphenol erospace ontact mphenol erospace for more information at

2 mphenol erospace Heavy Duty ML-DTL-22992, lass L Large ircular for Military & ndustrial ccessories quacon ontacts onnectors ables Options ack Others s lass L rimp Rear roduct Features, enefits and pecifications urrent apacity Rugged onstruction afety erviceability mphenol meets the demands for heavy duty & heavy power connectors with features that are critical to reliable interconnection in rugged environmental conditions. Heavy Duty lass L* connectors are highly suitable for industrial or military applications. Heavy electrical loads: current range from 40 to 200 amperes Direct current or single/three phase, 60/400 Hertz alternating current utomatic grounding for safety Meet ML-DTL qualification Resistance to the operating environments of heat, moisture, vibration, high impact and immersion - see chart below. Double stub coupling threads for faster connections; no cross threading, easy cleaning Left hand accessory threads to minimize cable twisting, wire breakage, accidental connector disassembly askets or O rings at appropriate surfaces for perfect weather tight connections Thermal hock ondition onfiguration Description Reference Moisture Resistance (able mounted connectors) Unmated Mated Five complete on hour temperature cycles of 55 to +125 Ten complete 24 hour cycles of +25 to +65 temperature at 90% to 98% humidity ML-TD-1344, method 1003, test condition ML-TD-202, method 106 Durability Mated 500 complete mating/unmating cycles ML-DTL alt pray (orrosion) Vibration mpact Heat Rise (lass L only) Fluid mmersion Water mmersion Unmated Mated Mated Mated Unmated Mated and Unmated 48 hour exposure to atomized 5% saline solution at to 55 Hz,.06 inch total excursion in 1 minute cycles for 6 hours, 55 to 2000 Hz, 10 peak amplitude sweep ine hammer blows from 1, 3 and 5 feet, three each in three axes on mounting panel Maximum rated D current for four hours at +25 in still air 20 hours immersion in hydraulic fluid and lubricating oil 4 hours immersion at 1 atmosphere pressure differential lass L onnectors on a ower Unit mphenol Heavy Duty lass L connectors have been exposed to the following environmental conditions, without compromise of mechanical integrity or degradation of electrical performance. ML-TD-1344, method 1001 ML-TD-1344, method 2005 ML-TD-202, method 207 ML-DTL ML-DTL ML-DTL mphenol also supplies other series of heavy duty cylindrical connectors: QWLD eries - Military ML-DTL qualified connectors and industrial equivalents. QWL eries - more compact heavy duty design for industrial power and control applications. tar-line, tar-line EX eries - ndustrial high power circulars. ee the Options/Others section of this catalog for more * mphenol lass L design is covered by one or more of the information on these series. following U.. atent umbers: 3,023,396, 3,221,292 lass L lug and Receptacle 462 ontact mphenol erospace for more information at

3 Heavy Duty ML-DTL-22992, lass L roduct ntroduction & Features mphenol erospace tyles Wall Mount Receptacle (power source) The mphenol lass L heavy duty connectors are the largest size cylindricals. They are available only in the specific configurations prescribed by ML-DTL for either military or industrial applications. This rigid configuration control assures correct interconnection of electrical circuits for maximum safety and reliability. ontrolled parameters include: onnector shell style and contact type - Wall mount and cable connecting receptacles are supplied with socket contacts only, and always lead from the power source. lugs (with coupling rings) have pin contacts only, and always lead to the equipment end. size - The direct relationship of shell size to current carrying capability reduces the possibility of inadequate wiring for heavy electrical loads. ccessories quacon traight lug able onnecting Receptacle without oupling Ring Wall Mount lug with oupling Ring (equipment end) urrent Rating (mperes) ontact / /0 Keyway - Four positions of the main keyway are used to discriminate between the following power sources: two wire D.. two wire single phase.. three wire single phase.. four wire three phase.. nsert rotation - When carrying alternating current (..), different angular rotations of the insert within the connector shell are used to distinguish between 60 Hertz and 400 Hertz circuits. Design features of mphenol lass L provide: reatest apacity - urrent ranges 40 to 200 amps, conductor sizes 6 to 4/0. afety - omplete protection of personnel and equipment if connectors are inadvertently disconnected under load. Foolproof Mating - Design incorporates voltage, current, frequency, phase and grounding requirements tandardization - ML-DTL lass L insert arrangements specify connector/cable combinations for maximum reliability. erviceable ontacts - ontacts are normally crimped to the cable before connector assembly. o insertion tools required. ushings are available to adapt smaller diameter wires to larger contacts. rc Quenching Design - Recessed socket contacts within the insert create an arc suppressing chamber which protects the user when connectors are separated under load. rogrammed oupling equence - rounding and neutral contacts engage before power contacts. Waterproof Design - unique combination of grommets and seals provides waterproofing in any condition - mated or unmated, capped or uncapped. Rugged onstruction - Machined from high strength aluminum. traight-line attachment of accessories eliminates possibility of cable twisting or misalignment. ccessories - upplied with all lass L connectors as indicated on the individual connector descriptions. Replacement accessories may be ordered separately. ee pages 472 and 473. ontacts onnectors ables rimp Rear lass L ack- s Options Others ontact mphenol erospace for more information at

4 mphenol erospace Heavy Duty ML-DTL-22992, lass L nsert rrangements ccessories quacon ontacts onnectors ables 2 28, 40 amp rating 28-12, Three phase, 4 wire, grounding 32, 60 amp rating , ingle phase, 2 wire, grounding 32, 60 amp rating able: ontacts: able: E, type, round, four #8 conductors O-04 F, (4-6-4/12R) 1090 per ML-DTL-3432 ontacts: able: in M39029/48 ocket M39029/49,, , E, type, round, two #6 conductors O-02 F, (2/4-2/8R) 1100 per ML-DTL-3432 in M39029/48 ocket M39029/ , E, type, round, four #6 conductors O-04 F, (4/4-4/12R) 1290 per ML-DTL Options ack Others s lass L rimp Rear 32-12, Three phase, 4 wire, grounding 44, 100 amp rating 44-02, Volts D, 2 wire ontacts: able: ontacts: in M39029/48 ocket M39029/49,, E, type W, round, two #2 conductors O-02 F, (2/1) 1385 per ML-DTL-3432 in M39029/48 ocket M39029/49 1/ / E nsulated ower able Engineers ssociation ontact Legend 6 4 1/0 4/0 464 ontact mphenol erospace for more information at

5 Heavy Duty ML-DTL-22992, lass L nsert rrangements mphenol erospace 44, 100 amp rating able: ontacts: E, type, round, four #2 conductors O-04 F, (4/1-4/8R) 1620 per ML-DTL-3432 in M39029/48 ocket M39029/49,, 1/ / , 2, 3, ccessories quacon 44-12, Three phase, 4 wire, grounding 44, 100 amp rating For avy round upport Equipment use only , 44-51, 44-52,44-56 Three phase, 3 wire, grounding able: ontacts: vailable in M90555 & M90558 only 4 each #1 conductors vailable in M90556 & M90557 only E, type W, round, four #1 conductors vailable in M90556 only E, type W, round, four #2 conductors vailable in M90556 only E, type W, round, four #6 conductors in M39029/48 ocket M39029/49,, 1/ / ontacts onnectors ables , 200 amp rating able: E, type, round, four #4/0 conductors O-04 E, (4/0000-4/4R) 2380 per ML-DTL rimp Rear 3 2 ontacts: in M39029/48 ocket M39029/49,, 4/ / , 2, 3, lass L ack- s 52-12, Three phase, 4 wire, grounding Options Others E nsulated ower able Engineers ssociation ontact Legend 6 4 1/0 4/0 ontact mphenol erospace for more information at

6 mphenol erospace Heavy Duty ML-DTL-22992, lass L lternate ing ccessories quacon ontacts onnectors ables lternate nsert Rotations To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate insert rotations are available. s shown in the diagrams below, position W, X, Y and Z are possible rotations of the insert within lass L connectors. The front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. ee how to order on next page; the keying position letter W, X, Y or Z goes at the end of the part number. W X Y Z Views looking into front face of pin insert or rear of socket insert. lass L nsert Rotations lternate Master Key/Keyway Rotations nother option for preventing cross-mating of incompatible connector voltages is to choose an alternate rotation of the key/keyway positions of the connector shell. The diagram below shows positions 1, 4, 5 and 6 for the master key/keyway. ee how to order on next page; the alternate master key/keyway position is tep 4 in building a part number. MTER KEYWY TYL OKET RREMET ormal 1 15 REF front face of receptacle shown ote that insert arrangement does not rotate with master key/keyway Options ack Others s lass L rimp Rear nsert rrangements D or 60 Hz ormal Keying (degrees from normal position) 400 Hz W X Y Z ontact mphenol erospace for more information at

7 Heavy Duty ML-DTL-22992, lass L How to Order Easy teps to build a part number... lass L eries M90555 M90556 M90557 M M umber Finish lternate Master Key/ Keyway nsert rrangement ontact Type mphenol erospace lternate nsert Rotation M Y ommercial umber Finish lternate Master Key/ Keyway nsert rrangement ontact Type lternate nsert Rotation L90555* Y tep 1. elect a M umber Designates Wall Mount Receptacle (ower ource) traight lug able onnecting Receptacle without oupling Ring Wall Mount lug with oupling Ring (Equipment End) tep 2. elect a Finish Designates onductive for circuits on-conductive for D circuits urrent Rating mps rounding ssemblies: Finish tep 3. elect a - (related directly to current carrying capability) Designates urrent arrying apability amperes amperes amperes amperes Master Key/Keyway 60Hz & 400 Hz 1 hase 3 hase 2 Wire 3 Wire 3 Wire 4 Wire 120 V 240 V 120/240 V 450/480 V 120/208 V L90555 L90556 L90557 L /416 V tep 4. elect an lternate Master Key/Keyway if needed designates normal position. s 1, 4, 5 and 6 of the master key/keyway prevent cross-mating of incompatible voltages. ee diagram on page /480 V (120 ) 5 (135 ) 4 (120 ) 4 (120 ) 5 (135 ) 6 (150 ) (120 ) 5 (135 ) 4 (120 ) 4 (120 ) 5 (135 ) 6 (150 ) (120 ) 4 (120 ) 1 (60 ) 4 (120 ) 5 (135 ) 6 (150 ) (120 ) 4 (120 ) 5 (135 ) 6 (150 ) tep 1. elect a ommercial umber Designates Wall Mount Receptacle (ower ource) traight lug able onnecting Receptacle without oupling Ring Wall Mount lug with oupling Ring (Equipment End) on-grounding ssemblies: Finish urrent Rating mps Master Key/Keyway D 2 Wire 28 VD (105 ) (105 ) (105 ) (105 ) ccessories quacon ontacts onnectors ables rimp Rear tep 5. elect an nsert rrangement ee pages for available insert arrangements for lass L connectors. nsert arrangements are determined by connector size (current carrying capability) and cable configuration to be accommodated. tep 6. elect a ontact Type Designates in ontacts ocket ontacts M90555/L90555 and M90557/L90557 are supplied with socket contacts only. M90556 /L90556 and M90558/L90558 are supplied with pin contacts only. tep 7. elect an lternate nsert Rotation if needed Used to prevent cross-mating of incompatible frequencies. bsence of a letter in this space indicates ormal (0 ) position of the insert. Refer to page lass L ack- s Options Others *ommercial umbers are supplied less protection caps and strain reliefs which can be added separately. mphenol Federal Vendor dentification FM77820 ontact mphenol erospace for more information at

8 mphenol erospace M (L) 90555, ML-DTL-22992, lass L Wall Mount Receptacle (power source) ccessories quacon ontacts onnectors ables RT # To complete, see how to order page 467. art umber Finish Master Key/Keyway nsert rrangement ontact Type lternate nsert Rotation M90555 or XX X XX or X L90555** or XX X XX or X R.531 M FULL T J F* T 4 HOLE H KET ROMMET Options ack Others s lass L rimp Rear Thread lass L Double tub F* ±.031 Dia H J Dia R () ll dimensions for reference only. rotective cover M90563 is supplied as part of this connector assembly. Refer to page 473 for dimensions. *F dimension applies only when rear nut is fully tightened. **ommercial umbers are supplied less protection caps and strain reliefs which can be added separately. T Dia. 468 ontact mphenol erospace for more information at

9 M (L) 90556, ML-DTL-22992, lass L traight lug mphenol erospace M LD RT # To complete, see how to order page 467. art umber Finish Master Key/Keyway nsert rrangement ontact Type lternate nsert Rotation M90556 or XX X XX or X L90556* or XX X XX or X L "O" R K M JOT KET ccessories quacon E Q ontacts onnectors ables and rrangement Thread lass L Double tub Dia. Max. E able Range K L Max. Free Length M pprox. Free Length , ll dimensions for reference only. rotective cover M90564 is supplied as part of this connector assembly. Refer to page 473 for dimensions. ontact bushings M3348 are supplied as part of connector as required. Refer to page 472 for dimensions. *ommercial umbers are supplied less protection caps and strain reliefs which can be added separately. Dia Q Dia. Max rimp Rear lass L ack- s Options Others ontact mphenol erospace for more information at

10 mphenol erospace M (L) 90557, ML-DTL-22992, lass L able onnecting Receptacle without coupling ring ccessories RT # To complete, see how to order page 467. art umber Finish Master Key/Keyway nsert rrangement ontact Type lternate nsert Rotation M90557 or XX X XX or X L90557* or XX X XX or X L M quacon.531 M FULL T E ontacts onnectors ables "O" R LD Options ack Others s lass L rimp Rear and rrangement Thread lass L Double tub Dia. Max. E able Range L Max. Free Length M pprox. Free Length , ll dimensions for reference only. rotective cover M90563 is supplied as part of this connector assembly. Refer to page 473 for dimensions. ontact bushings M3348 are supplied as part of connector as required. Refer to page 472 for dimensions. *ommercial umbers are supplied less protection caps and strain reliefs which can be added separately. Dia ontact mphenol erospace for more information at

11 M (L) 90558, ML-DTL-22992, lass L Wall Mount lug with oupling Ring (equipment end) mphenol erospace KET ROMMET J.031 F K RT # To complete, see how to order page 467. art umber Finish Master Key/Keyway nsert rrangement ontact Type lternate nsert Rotation M90558 or XX X XX or X L90558** or XX X XX or X M JOT KET R ccessories quacon Q ontacts onnectors ables TERFL EL T 4 HOLE Thread lass L Double tub F* Dia J ±.031 K Dia Q Dia. Max. R () ll dimensions for reference only. rotective cover M90564 is supplied as part of this connector assembly. Refer to page 473 for dimensions. *F dimension applies only when rear nut is fully tightened. **ommercial umbers are supplied less protection caps and strain reliefs which can be added separately. T Dia rimp Rear lass L ack- s Options Others ontact mphenol erospace for more information at

12 mphenol erospace ML-DTL-22992, lass L ccessories ontacts, ontact ushings ccessories M39029/48 in ontact H REF D quacon M39029/49 ocket ontact K REF J ontacts onnectors ables H Order Replacement ontacts by M part number listed below for either ocket or in: ocket M art umber in M art umber ontact Wire Well Ref. Dia. D Dia. ±.001 Dia. H Dia. J K Ref Options ack Others s lass L rimp Rear M39029/ M39029/ /0 4/ ± M39029/ /0 4/ ± M39029/ M39029/ / ± M39029/ / ± M39029/ M39029/ ± ± ± M39029/ ± ± ±.002 M39029/ M39029/ ± ± ± M39029/ ± ± ±.002 M39029/ M39029/ ± ± ± M39029/ M39029/ ± ± ± M3348 ontact ushing Order ontact ushings by M part number listed below: M art umber ontact Wire arrel (Ref) Wire (Ref) Dia Dia M L M L M L M L M L M L M L M L M3348-4/0-2/0L 4/0 2/ ee page 476 and 477 for information on ontact Removal Tools for lass L connectors. ll dimensions for reference only. 472 ontact mphenol erospace for more information at

13 ML-DTL-22992, lass L ccessories train Reliefs, ealing lands, rotection aps mphenol erospace H M90561 able train Relief M23747 able ealing land rotection aps L Order rotection aps by M part number listed in charts below. To complete the M part number add letter (onductive) for or (on-onductive) for D connector assemblies. Order train Reliefs by M part number listed below: M art umber rrangement umber Dia H Dia. able Range Max. Min. L pprox. M , M , M M M M M M M M M Order able ealing lands by M part number listed below: M art umber rrangement umber Dia Dia ±.010 Min able Dia. Ref. M , 32-05, M M M M M M M M M M ll dimensions for reference only. ccessories quacon ontacts onnectors ables M90563 rotection aps used with M90555 Wall Mount Receptacle, M90557 able onnecting Receptacle M art umber Use with Thread lass L Double tub For M90555 Dia. Ref. For M90557 pprox. M ( ) M ( ) M ( ) M ( ) M ( ) J RVET rimp Rear lass L M art umber M90564 rotection aps used with M90556 traight lug, M90558 Wall Mount lug Use with Thread lass L Double tub For M90556 Dia. Ref. For M90558 pprox. J Max. M ( ) M ( ) M ( ) M ( ) M ( ) KET.969 MX ack- s Options Others ontact mphenol erospace for more information at

14 mphenol erospace ML-DTL-22992, lass L nstallation nstructions ccessories quacon ontacts onnectors ables 2 omplete installation instructions (L-1014) for lass L connectors are available online at The following pages are condensed assembly instructions to familiarize the user with the installation procedure and tooling required. able reparation (M90556 and M90557 connectors only) The following table shows the standard wire color coding, generator terminal markings, and connector contact identification used with lass L connectors. enerator Terminal Marking + (O) (E) ground L 1 L 2 L 3 L 0 (or nd) tandardized enerator Wiring and onnections urrent 28Vdc 28Vdc ontact Designation onductor ircuit ositive egative hase hase hase eutral afety grounding tep 1) Determine cable lay to facilitate alignment of contacts and insert holes without wire crossing. tep 2) trip cable jacket to dimension shown. void cutting or nicking individual conductor insulation. onnector D nches pprox OUTER JKET D Wire olor lack White lack Red lue (ommercial may be orange) White reen (ommercial may be bare) EE OTE OTE: ome insert arrangements require that two or more ground wires are terminated into one contact. Dimension D must therefore be increased to permit routing these wires around the larger conductors Options ack Others s lass L rimp Rear tep 3) nstall connector components in the order shown in the applicable assembly view illustrated on pages 475 and 476. tep 4) trip insulation of individual conductors to 3/4 inch from end of connector. 474 ontact mphenol erospace for more information at

15 ML-DTL-22992, lass L nstallation nstructions, cont. mphenol erospace M90555 Wall Mount Receptacle Wall Mount Receptacle omponents: nsert ssembly, ocket 3. ontact, ocket 4. rommet ssembly, ocket 5. ut, Retaining 6. rotective ap ssembly (not shown) 7. Flange asket (not shown) ccessories quacon ontacts onnectors ables M90556 traight lug traight lug omponents: 1. & oupling ut ssembly 2. nsert ssembly, in 3. ontact, in 4. pacer ssembly, in 5. ack dapter 6. land Washer 7. land 8. able rip 9. land ut 10. Lockwasher (3 each) 11. crew (3 each) 12. rotective ap ssembly (not shown) rimp Rear lass L OTE: On shell size 32 connectors, item #6 (gland washer) is contained within item #5 (back adapter). ack- s Options Others ontact mphenol erospace for more information at

16 mphenol erospace ML-DTL-22992, lass L nstallation nstructions, cont. ccessories quacon ontacts onnectors ables M90557 able onnecting Receptacle able onnecting Receptacle omponents: nsert ssembly, ocket 3. ontact, ocket 4. pacer ssembly, ocket 5. ack dapter 6. land Washer 7. land 8. able rip 9. land ut 10. Lockwasher (3 each) 11. crew (3 each) 12. rotective ap ssembly (not shown) 2 OTE: On shell size 32 connectors, item #6 (gland washer) is contained within item #5 (back adapter) Options ack Others s lass L rimp Rear M90558 Wall Mount lug Wall Mount lug omponents: 1. & oupling ut ssembly 2. nsert ssembly, ocket 3. ontact, in 4. rommet ssembly, in 5. ut, Retaining 6. rotective ap ssembly (not shown) 7. Flange asket (not shown) 476 ontact mphenol erospace for more information at

17 ML-DTL-22992, lass L nstallation nstructions, cont. mphenol erospace ontact nstallation tep 1) nsert stripped conductors in contact wirewells. f contact bushing is used, insert conductor in bushing and bushing in contact wirewell. f two or more ground wires are inserted into a single contact, make sure all wires are fully seated in wirewell. tep 2) elect correct crimping tool, locator and die combination from the table for contacts to be installed. With conductor or contact bushing in place, insert contact into tool. lose crimping die fully to form a uniform crimp. ontact art umber M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ M39029/ /0 4/0 4/0 1/0 1/0 1/ Type rimping Tool* ico Model 400 or ico Model 400 or ico Model 400 or ico Model 400 or f crimping tools are available, contacts may be affixed to conductors by soldering. Use rosin-alcohol solder flux, a good grade of 60/40 solder and a 500 watt soldering iron or probe type resistance soldering equipment. re-tin conductors before soldering. older must not be present on shoulder or retention area of contact. onnector ssembly tep 1) f inserts are not already positioned in the connector shell, align large tab on insert with large slot in shell and push insert in until it bottoms in shell. tep 2) pply a thin coating of Dow orning D-4 lubricant to the periphery of contact holes in spacer or grommet assembly. ush contacts into rear of spacer or grommet assembly until locked into contact retainer bushing. tep 3) lign contacts with proper holes in insert. mall key of insert must be aligned with appropriate keyway in spacer or grommet assembly. lide contacts into insert holes until spacer or grommet assembly butts against insert. thin film of Dow orning D-4 lubricant applied to the periphery of insert contact holes will provide maximum sealing efficiency. tep 4) ssemble accessories to connector. The back adapter O ring should have a very thin film of Dow orning D-4 lubricant applied. Outer surfaces only of gland should be lubricated with a thin film of UniTemp rease E. void getting grease on inside surfaces of gland and on cable jacket. tep 5) Tighten retaining nut or gland nut on shell or adapter. metal-to-metal seating condition is desirable, but may not be attainable with maximum cable diameters. Locator* Die* Removal Tool D-4/0-1 M D-1/0 M D-4 M D-6 M * vailable from ico rimping Tools o., 9832 Jersey ve., anta Fe prings, a hone: ontact Removal tep 1) Loosen all rear accessories and slide back along cable. tep 2) Remove spacer or grommet assembly with contacts from connector insert. tep 3) Using the appropriate size contact removal tool, push tool over front of contact until it bottoms in spacer or grommet assembly hole. This will open contact retaining bushing and allow contact to be removed from the spacer or grommet assembly from the rear. When using jacketed cable, all contacts should be released from contact retention bushings before removal from spacer or grommet assembly is accomplished. M90562 ontact Removal Tool Order M90562 contact Removal Tool by M part number listed below: M art umber ±.016 ontact Dia M81969/ /0.790 M81969/ /0.696 M81969/ /0.558 M81969/ M81969/ M81969/ ll dimensions for reference only. ccessories quacon ontacts onnectors ables rimp Rear lass L ack- s Options Others ontact mphenol erospace for more information at

Amphenol Heavy Duty Cylindrical Connectors

Amphenol Heavy Duty Cylindrical Connectors mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands

More information

Amphenol Heavy Duty Cylindrical Connectors

Amphenol Heavy Duty Cylindrical Connectors mphenol eavy uty ylindrical onnectors 12-052-9 mphenol Inside over is lank able of ontents age mphenol eavy uty ylindrical onnectors, I--22992/roprietary esign haracteristics, nvironmental esting................................................................

More information

QPL Qualified Product CATALOG

QPL Qualified Product CATALOG Q Qualified roduct TO ext3 eavy uty ylindrical onnectors I-T-22992, ext3 lass eavy uty onnectors are ruggedly constructed and tested to stand up to the rigors of unforgiving environments. This class represents

More information

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts

More information

Amphenol QWL Series Cylindrical Connectors Amphenol

Amphenol QWL Series Cylindrical Connectors Amphenol mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,

More information

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors

More information

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission

More information

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3

More information

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors IOUIO etronics India, established as manufacturers of connectors in, has grown into a leading producer and exporter of I grade electrical connectors and related accessories. etronics India's continuing

More information

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet

More information

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20

More information

MIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol

MIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol mphenol --5015, atrix O O --5015, atrix esign haracteristics, ustomer Options. 433 nsert vailability and dentification. 434, 435 nsert rrangement rawings. 436-444 lass escriptions, erformance pecifications.

More information

Amphenol. AC and SAE AS50151 Threaded Standard Cylindrical Connectors.

Amphenol. AC and SAE AS50151 Threaded Standard Cylindrical Connectors. mphenol and 50151 ed tandard ylindrical onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. able of ontents age mphenol eries onnectors Introduction/eneral

More information

Heavy Duty Cylindrical MIL-C QWLD

Heavy Duty Cylindrical MIL-C QWLD 20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle

More information

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31. L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting

More information

MIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol. New Featured

MIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol. New Featured mphenol --5015, atrix ew eatured O O --5015, atrix able of ontents. 170 esign haracteristics, ustomer Options. 171 nsert vailability and dentification. 172, 173 nsert rrangement rawings. 174-182 lass escriptions,

More information

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors. mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,

More information

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2 RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14

More information

Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol

Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol mphenol iniature ylindrical onnectors 12-070-15 eets I--26482, eries 1 pecifications mphenol Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility...................1,

More information

Amphenol Amphe-Armor Series Rugged Over-molded Connectors

Amphenol Amphe-Armor Series Rugged Over-molded Connectors mphenol mphermor eries ugged Overmolded onnectors rugged connector originally designed for the geophysical industry and the exploration of natural resources, where connectors are needed to withstand the

More information

SJT Series. Amphenol. Aerospace. Amphenol

SJT Series. Amphenol. Aerospace. Amphenol eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............

More information

Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol

Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol W. WWW.100Y.O WWW.100Y.O. WWW.100Y.O. WWW mphenol iniature ylindrical onnectors 12-070-15 W WWW.100Y.O. WWW.100Y.O eets I--26482, eries 1 pecifications.t.t.t O. WWW.100Y.O. WWW.100Y.O.T O. WWW.100Y.O.

More information

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed

More information

MIL-DTL-83723, Series III, Matrix

MIL-DTL-83723, Series III, Matrix MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert

More information

Amphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder

Amphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder mphenol J/J ubminiature ylindrical onnectors 2-090-7 mphenol J onnectors I--38999 eries II rimp and I--27599 eries II older mphenol J onnectors I--38999 eries I rimp and I--27599 eries I older mphenol

More information

Features and Application

Features and Application ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly

More information

Reverse Bayonet Coupling Connectors

Reverse Bayonet Coupling Connectors Reverse ayonet oupling onnectors Series RoS ompliant onforming Standard -T-5015 Wa t e r p r o o f P67 P55 ock Type ayonet OUT series is a bayonet coupling connector which utilizes -T-5015 insert arrangements

More information

Low Mating Force how to order (military types)

Low Mating Force how to order (military types) how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail

More information

Heating Cable. Ordering Information SRL-C SRL-CR, CT SRP-C, SRP-CT CWM-C CWM-CT SRL-MC SRL-MCR, MCT SRM/E-C SRM/E-CT SRL-C SRL-CR, CT SRP-C, SRP-CT

Heating Cable. Ordering Information SRL-C SRL-CR, CT SRP-C, SRP-CT CWM-C CWM-CT SRL-MC SRL-MCR, MCT SRM/E-C SRM/E-CT SRL-C SRL-CR, CT SRP-C, SRP-CT L & L eries onnection ccessories L eries Re-usable omponents Through-the-nsulation Mounting Provides High Visibility asy ccess for Maintenance RTP RTT RT L eries Low Profile Provides asy nstallation of

More information

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

DEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS

DEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements

More information

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer. This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the

More information

KPSE High performance crimp contact connectors. 1 Standard MIL-C mates with any connector designed to MIL-C and VG

KPSE High performance crimp contact connectors. 1 Standard MIL-C mates with any connector designed to MIL-C and VG 26482 eries onnectors igh performance crimp contact connectors igh performance crimp contact connectors igh performance rimp termination losed entry socket contacts eries environmental, miniature circular,

More information

KDB / VG Series

KDB / VG Series / V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................

More information

MS/Standard DL-Class Pre-Earth type

MS/Standard DL-Class Pre-Earth type MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety

More information

AMPHENOL CORPORATION Amphenol Industrial. Phone: Delaware Avenue Sidney, NY

AMPHENOL CORPORATION Amphenol Industrial. Phone: Delaware Avenue Sidney, NY O OOIO mphenol Industrial hone: -364-9011 191 elaware venue idney, Y 133-1395 www.amphenol-industrial.com otice: pecifications are subject to change without notice. ontact your nearest mphenol orporation

More information

ca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular

ca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include

More information

MIL-C-5015 Bulkhead Receptacles

MIL-C-5015 Bulkhead Receptacles I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series

More information

High Density Interconnects

High Density Interconnects Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc

More information

Connectors Conforming to European Safety Standards

Connectors Conforming to European Safety Standards Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety

More information

Please visit our Website at

Please visit our Website at able of ontents age o. mphe-ite* eries - mphenol s ltimate ommercial ubminiature onnector.......... 1 erformance riteria, pecifications............................ 2 Insert vailability and Identification............................

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference

More information

Military Specification Cross Reference

Military Specification Cross Reference --26482, eries 2 onnectors ntermatable with --26482 eries Operating temperature 55 to + 200 The onnector is designed to meet the rugged requirements o --26482, eries 2/--83723 eries *, the speciication

More information

Waterproof Circular Connectors

Waterproof Circular Connectors Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16

More information

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets Pin & Sleeve Heavy Duty Industrial Wiring Devices for North merican and European Markets Pin & Sleeve SFETY, PERFORMNE ND DURILITY...IN SNP! Extensive Product Family: - Safe and reliable, portable electrical

More information

Waterproof Circular Connectors

Waterproof Circular Connectors Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth

More information

Amphenol 67 and 165 Series Miniaturized Standard Connectors

Amphenol 67 and 165 Series Miniaturized Standard Connectors Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet

More information

Amphenol MIL-DTL-83723, Series III, Pyle

Amphenol MIL-DTL-83723, Series III, Pyle Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded

More information

HD30 & HDP20 Series. Contents. Mounting 88. Overview. Dimensions 80. How To Instructions Part Numbering System 81. Configurations 82-83

HD30 & HDP20 Series. Contents. Mounting 88. Overview. Dimensions 80. How To Instructions Part Numbering System 81. Configurations 82-83 HD30 & HDP20 Series Contents HD30 & HDP20 Series Overview 80 Mounting 88 Dimensions 80 How To Instructions 89-90 Part umbering System 81 Configurations 82-83 Wire Insulation 83 Special Modifications 84-85

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle ML-DTL-83723, Series, TLE OF CONTENTS ML-DTL-83723, Series, : Design Features, Customer Options, Manufacturer s Specifications.... 363, 364 Quick Reference of Choices - Threaded Styles............... 365-367

More information

Terminal Block Box (Spring Type) SY3000/5000/7000 Series

Terminal Block Box (Spring Type) SY3000/5000/7000 Series INFORMATION 5 ort olenoid alve Terminal lock ox (pring Type) Y3000/5000/7000 eries Compact RoH Height 6.7 mm shorter (Approx. 9% reduction) Installation area of the terminal block box Reduced by approx.

More information

The Centi Line -.075" Contact Spacing

The Centi Line -.075 Contact Spacing The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

DT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30

DT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30 ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories

More information

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed) 2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification 80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26

More information

Contact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω

Contact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω 8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable

More information

Amphenol Amphenol Pcd Terminal Junction Systems

Amphenol Amphenol Pcd Terminal Junction Systems igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved

More information

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-

More information

ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H

ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8 Port zpv02 A B C D E F G H. Section H X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /

More information

DT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW

DT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

DEUTSCH DBAS Series Connectors

DEUTSCH DBAS Series Connectors DEUTSH DS Series onnectors Standards SE/S81703 Series III, UTE 93422 Model HE 311 Extreme Reliability in Harsh erospace and Military pplications EROSPE, DEENSE & MRINE /// DEUTSH DS SERIES ONNETORS DEUTSH

More information

ADEX Series. Air Control Valves. Section D

ADEX Series. Air Control Valves. Section D X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

MIL Class M Series D*M D*MA connectors and crimp contacts

MIL Class M Series D*M D*MA connectors and crimp contacts eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic

More information

The Amphe-Power Family of Connectors For High Power Applications

The Amphe-Power Family of Connectors For High Power Applications The mphe-ower amily of onnectors or igh ower pplications The mphe-ower Series consists of three of the time-tested and reliable families of mphenol Industrial onnectors, all of which are MI-5015 styles,

More information

MIL-DTL-38999, Series III TV, Configurator Online at

MIL-DTL-38999, Series III TV, Configurator Online at ML-TL-, TV, onfigurat Online at www.amphenol-aerospace.com Now you can build a part number f Military ommercial ML-TL- through our online configurat, located on the home page of www.amphenol-aerospace.com.

More information

Amphenol. Amphenol Amphe-Lite Subminiature Cylindrical Connector

Amphenol. Amphenol Amphe-Lite Subminiature Cylindrical Connector mphenol mphenol mphe-ite ubminiature ylindrical onnector 12-094-6 www.amphenol-industrial.com mphenol 97 eries onnectors are recognized and recognized. or additional information on the mphenol mphe-ite

More information

Midwest Electric Products. Temporary Power

Midwest Electric Products. Temporary Power Midwest Electric roducts Temporary ower Midwest Electric roducts Temporary ower Midwest Electric provides the temporary power needed by construction trades prior to permanent service equipment installation.

More information

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D

Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

2M Series Contacts and Tools

2M Series Contacts and Tools Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*

More information

HIGH DENSITY INTERCONNECTS HD38999

HIGH DENSITY INTERCONNECTS HD38999 HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors

More information

MIL-DTL-26500, Pyle. Amphenol. Aerospace. Amphenol

MIL-DTL-26500, Pyle. Amphenol. Aerospace. Amphenol ML-DL-, New/Featured LE OF CONEN ML-DL-, Product ntroduction and.................... 396 Descriptions, Features, pecifications............. 397, 398 nsert s, lternate................ 399, 400 ML-DL- luminum/tainless

More information

MIL-C Series 4 PART NUMBER CONSTRUCTION

MIL-C Series 4 PART NUMBER CONSTRUCTION MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle

More information

QO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers

QO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers QO and Miniature ircuit reakers Miniature ircuit reakers lass 720 / Refer to atalog 0730T9801 Low mpere Miniature ircuit reakers unit mount miniature circuit breakers (cable-in/cable-out) are ideal for

More information

VEAM PT. VEAM PT Connectors VEAM PT. Series PT CPT. Military Spec Mil-DTL Series 1 Mil-DTL Series 1

VEAM PT. VEAM PT Connectors VEAM PT. Series PT CPT. Military Spec Mil-DTL Series 1 Mil-DTL Series 1 eatures elector and uide enefits V PT eries PT PT ilitary pec il-t-26482 eries il-t-26482 eries arket ilitary/erospace ilitary/erospace oupling ayonet ayonet ax Temperature 25 25 ardware luminum luminum

More information

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The

More information

MMC RTX series EN3716

MMC RTX series EN3716 MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

More information

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA 17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

Contact resistance : environmental class hermetic class

Contact resistance : environmental class hermetic class 525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable

More information

Product Services Information

Product Services Information Product Services nformation STLLTO STRUTOS 156837 K7 Lawn and arden Tractors X300 and X500 40 H TRTOR SHOVL Parts in Kit - ontrols, rackets and lectrical Litho in U.S.. LS PROUT - 40 H TRTOR SHOVL odel

More information

INSTRUCTION SHEET

INSTRUCTION SHEET 330086-000 INSTRUTION SHEET Instruction for Installation and Maintenance of Powertite Series: Pin and Sleeve Receptacles, Plugs and able onnectors (30, 60, 100 and 150 mpere) For Use With opper onductors

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1 MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications

More information

Micro-D TwistPin Connectors and Accessories Product Selection Guide

Micro-D TwistPin Connectors and Accessories Product Selection Guide Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and

More information

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure

More information

Allen Electric Connector Sales, Inc. (AECS, Inc.)

Allen Electric Connector Sales, Inc. (AECS, Inc.) Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom

More information

3 Terminals, Kits and Tools

3 Terminals, Kits and Tools 3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 5 Butt onnectors 5 Disconnects 11 Female 11 Male 17 Multi-Stack 22 Ring Tongue Terminals 23 For more than 30 years, 3M has been a

More information

Rotations. FPT MIL-DTL Series FPT EMI/EMP. Circular Filter Connectors Features, Alternate Rotations. Filter. FPT Alternate Positions

Rotations. FPT MIL-DTL Series FPT EMI/EMP. Circular Filter Connectors Features, Alternate Rotations. Filter. FPT Alternate Positions FPT I-DT-26482 eries ircular onnectors Features, Alternate otations The Amphenol FPT eries combines the unique design features of the miniature PT eries with an EI filter. Intermateable with I-DT-26482

More information

MIL-DTL Series I, II, III Connectors

MIL-DTL Series I, II, III Connectors LTL38 Series,, onnects Perfmance and aterial Specifications TRLS FSHS luminum Receptacle Grounded Plug luminum alloy luminum alloy* nsulat High grade plastic High grade plastic ontacts opper alloy, gold

More information

Mil-Spec Backshells and Connector Accessories

Mil-Spec Backshells and Connector Accessories Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical

More information