INSTALLATION & OWNER S MANUAL

Size: px
Start display at page:

Download "INSTALLATION & OWNER S MANUAL"

Transcription

1 INDUSTRIES, LLC. INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 40 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KGL4AS) This Curtis Cab is designed and manufactured for use only as reasonable weather protection. This cab is not applicable, Nor should the cab be considered as protection against roll over, collision or other accidents that may result. This cab is NOT a R.O.P.S. cab. Extreme care should be taken when operating and by qualified, experienced operators only. The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete. Exposure to Carbon Monoxide can Cause illness, serious injury or death. Never operate vehicle if suspicious of Carbon Monoxide. Inspect exhaust system for leaks monthly. Leaks can result from loose connections, corrosion, cracks or other damage to the exhaust manifold. If leaks are found, repair or replace exhaust system. Do not use vehicle until repair or replacement is complete. ADDED WEIGHT Curtis Cabs, blades and general accessories add additional weight to the base vehicle. All Curtis accessory weights are listed in product brochures. Deduct the accessories total weight from the vehicles rated capacity and never exceed the vehicles rated capacity including driver and passenger. Rev. F, p. 1 of 11

2 DESIGN CONCEPT Curtis Cabs feature an assembly of parts designed for your vehicle which require adjustment and alignment of components to accommodate vehicle variations and provide proper weather protection. For accurate installation, proper operation, and years of satisfaction, please read and understand the installation instructions. From all of us at Curtis, we thank you for choosing our product. ADDED WEIGHT Curtis Cabs, blades and general accessories add additional weight to the base vehicle. All Curtis accessory weights are listed in product brochures. Deduct the accessories total weight from the vehicles rated capacity and never exceed the vehicles rated capacity including driver and passenger. This Curtis Cab is designed and manufactured for use only as reasonable weather protection. This cab is not applicable, nor should the cab be considered as protection against roll over, collision or other accidents that may result. This cabs is NOT a R.O.P.S. cab. Extreme care should be taken when operating and by qualified, experienced operators only. Exposure to Carbon Monoxide can Cause illness, serious injury or death. Never operate vehicle if suspicious of Carbon Monoxide. Inspect exhaust system for leaks monthly. Leaks can result from loose connections, corrosion, cracks or other damage to the exhaust manifold. If leaks are found, repair or replace exhaust system. Do not use vehicle until repair or replacement is complete. CAB INSTALLATION BEFORE YOU START HELPFUL REMINDERS: A. Refer to parts diagram toward the back of this manual to help identify parts during the assembly process. B. Leave all bolts loose for later adjustment unless otherwise specified. C. Read and understand all instructions before beginning. D. Plastic washers have been supplied to provide a weather seal around all exterior fasteners. The plastic washer should be installed under each bolt or nut head directly against the outside cab surface. Care should be taken not to over tighten the fasteners and damage the plastic washer. Also use metal washers as required under bolt heads and nuts. E. Apply a clear silicone sealant to seal any minor gaps that may occur due to vehicle variances. For example, windshield cowl to unitized frames. TOOLS REQUIRED: NO. 2 MEDIUM PHILLIPS HEAD SCREWDRIVER 3/8 IN. DRILL BIT 12 MM SOCKET 1/2 IN. SOCKET 14 MM SOCKET 19 MM DEEP SOCKET 3/16 INCH ALLEN DRIVE 3/8 DRIVE 7/16" SOCKET 3/8 IN. ELECTRIC HAND DRILL RATCHE 12 MM, (TWO) 19 MM, AND 21MM OPEN END WRENCH 7/16" AND 1/2" OPEN END WRENCH Rev. F, p. 2 of 11

3 1. VEHICLE PREP - MOUNTS INDUSTRIES, LLC. MODEL: KUBOTA GRAND L 40 SERIES HARD SIDED CAB 1.1 Remove grab handles from left and right fenders. Remove and save SMV sign. 1.2 Pull rubber floor mat up along front and side edges. Once unsnapped, fold back toward center of tractor and temporarily tuck out of the way. 1.3 Remove nuts and lock washers from the left and right tractor floor board mounts with 19 mm deep socket and wrench. Install cab mounts from hardware box with nuts and lock washers. REMINDER: Do not tighten any bolts during installation unless instructed to do so. 1.4 Lower 3 point hitch, remove storage hanger for center link, and remove the nuts, lock washers, and large flat washers from the tractor body mounts with 19 mm wrench and socket. Also remove the rear hydraulic control valves from behind the tool box with a 12 mm socket and let it hang by the hydraulic hoses.. Retain all hardware for later use. NOTE: Rear hydraulic control valves are optional on 40 series tractors. 1.5 Position the large flat washers, removed in step 1.4 on top of the rear mount as shown. TIP: A dab of grease is a good way to keep the washers in position during assembly. FIG 1.3 Right side shown. MOUNTS FIG 1.4 Rear Body Mounts 1.6 Tuck the top of the rear mount under the roll bar cross tube and into position over the tractor body mounts as shown. Have an assistant place the lock washers, and nuts, removed in step 1.4 onto the mounts. 1.7 Tighten the mounts, and install the rear hydraulic control valves using the hardware removed in step 1.4. Install the storage hanger for the 3 point hitch center link using the 8mm x 30mm bolt provided in the hardware kit and the nuts and washers removed in Step 1.4. The original bolt can be discarded. 1.8 If tractor is equipped with leg protectors, unbolt them from the cowl and floorboard. They will not be used with the cab installed. FIG 1.5 Rear Mount prep FIG 1.8 Leg protectors Rev. F, p. 3 of 11

4 INDUSTRIES, LLC. 2. BOTTOM REAR PANEL 2.1 Install bottom rear panel to the rear mount with three 1" long allen head bolts as shown, locknuts to be on outside surface. (Reminder use nylon washers against the outside painted surface of all cab parts on all exterior hardware.) NOTE: Position 1" flat bulb as shown, facing forward onto fenders. FIG 1.6 Position Rear Mount 3. COWL FIG 1.7 Install Rear Mount FIG 2.1 Install Rear Panel 3.1 Remove the protective film from the cowl windows. Position the cowl over the hood of the vehicle with the 1" flat bulb pointing forward towards the front of the tractor as shown. 4. SIDE FRAMES 4.1 Remove doors from side frames (for easier handling) by unlatching and sliding up and off the hinge pins Have an assistant hold the left side frame in place, positioning the 1" flat bulb facing in along the rear fender. Bolt to the front mount with 1 long allen head bolt. Attach to the cowl with a 3/4 long allen head bolt in the top hole only. Attach to the bottom rear panel with two 1" long allen head bolts. Fig. 3.1 Position Cowl 4.3 Repeat steps 4.1 and 4.2 for right side frame. Fig Side frame to mount Fig Front Cowl Bolt Fig Bottom Rear Panel bolts Rev. F, p. 4 of 11

5 5. TOP REAR PANEL INDUSTRIES, LLC. 111 HIGGINS STREET, WORCESTER, MA 5.1 Install top rear panel to side frames with four 3/4" long allen bolts. Tighten the top bolt on each side. 6. WINDSHIELD SUPPORT 6.1 Install the windshield support to the left and right side frames with 3/4 long allen head bolts in the bottom holes only. Bolts will be installed in the top two holes during roof installation. Push frames against the flange at the bottom of the windshield support and tighten bolts. Fig. 5.1 Top Rear Panel 7. WINDSHIELD Fig. 6.1 Windshield support 7.1 Install 3/4 thick spacers from hardware box onto windshield hinges and insert flat head bolts. Have an assistant help lift the windshield in to place and install flat washers and nuts. Attach windshield latches to windshield latch receivers on the cowl by squeezing tabs to retract spring loaded pins. Lift up on bottom of windshield while closing latches. Check alignment of windshield with side frames and tighten hinge hardware. NOTE: Hinges are plastic do not over tighten hardware. Maximum torque 7 ft. Lbs. Fig Install Windshield. Fig Windshield Hinges Fig Windshield Latches 8. REAR WINDOW 8.1 Line up the edges of the top and bottom rear panel with the edges of the side frames and tighten rear panel hardware. 8.2 Install 3/4 thick spacers from hardware box onto windshield hinges and insert flat head bolts. Have an assistant help lift the windshield in to place and install flat washers and nuts. Hold in position and turn release latches to latch window in place. Adjust alignment of windshield with side frames and tighten hinge hardware. NOTE: Hinges are plastic do not over tighten hardware. Maximum torque 7 ft. Lbs. Fig. 8.2 Side Windows Rev. F, p. 5 of 11

6 9. ROOF 9.1 Use a phillips head screwdriver or other pointed instrument to poke holes in the roof headliner at each of the bolt holes. Puncture the headliner from the inside to the outsidehave an assistant help lift the roof into place. Install roof with 1 long allen head bolts in the front corners. Use 3/4 long allen bolts in all remaining locations (7 places). Tighten all roof hardware. 10. Roll Bar Attachment INDUSTRIES, LLC Install roll bar mounts to bottom rear panel with four 1 long carriage bolts (2 per side). Bolt heads should be on the outside of the cab. Nylon washers are not required. Install the roll bar brackets to the roll bar mounts with 1 long carriage bolts as shown (2 per side). Again nylon washers are not required. Fig Roll Bar Attachment 11. FINISHING TOUCHES 10.1 Tighten the bolts between the bottom of the side frames and the mounts. Tighten floorboard mounts loosened in Step 1.3 Cut notch out of rubber floor mat as shown and reinstall. CUT 10.2 Position the bottom flanges of the cowl on top of the rubber floor mat and install to remaining inserts in side frame with 3/4 long hex head bolts Using the slots in the bottom flanges of the cowl as a guide, drill a 3/8 diameter hole in the tractor floor mat and floor board. Install a 1 long allen head bolt in each hole and tighten Tighten all remaining hardware. Install plastic nut covers on all exposed nuts on the interior of the cab. Fig Install floor mat Remove protective film from lower door windows. Apply grease to the pin hinges if desired. With assistance, re-install the doors onto the pin hinges. Work the doors back and forth until the hinges are completely seated. Note: the hinges, inside latch, and striker bolt can also be adjusted for proper engagement. Install gas springs from hardware kit with the rod end on the door side Re-install SMV sign to rear cross bar Install wiper motor and any other accessories according to the instructions included with the kits. Fig Cowl flanges CARE & MAINTENANCE INSTRUCTIONS Check and tighten hardware after 40 hours of operation. Periodically inspect and tighten hardware for the remainder of the unit s life. Wash the painted surfaces of the unit with commercial automotive cleaning products. Clean windows with glass cleaner. Rev. F, p. 6 of 11

7 INDUSTRIES, LLC. THIS PAGE INTENTIONALLY LEFT BLANK Rev. F, p. 7 of 11

8

9 HEATER INSTALLATION: INDUSTRIES, LLC. MODEL: CURTIS - KUBOTA GRAND L 30 and 40 SERIES OPTIONAL AUXILIARY HEATER INSTALLATION (p/n 9PH20S23) A. Install the 20,000 BTU MEGA BURNER heater to the heater bracket, using two of the 1/4 bolts on the side of the heater. B. The location for the heater unit is on the left unitized side frame. C. Remove plugs (if equipped) from heater inlet and outlet tubes. D. Remove plugs in bottom left side of cowl and install plastic bushings from the heater kit by pushing into the holes from the inside of the cab. HEATER PLUMBING: *** CAUTION *** To avoid injury caused by hot engine coolant, make sure the engine is completely cooled down before beginning installation of auxiliary heater. A. Drain the cooling system. For the supply line to the heater, remove the sending unit. Install the sending unit in the hex bushing of the sending unit adaptor. Install the hex bushing into the end of the adaptor with a large plastic washer from the hardware kit. Install a small plastic washer onto the end of the sending unit adaptor and install into the engine block where the sending unit was removed. If the sending unit adaptor does not tighten so that the port on the side for the 3/8 NPT nipple points toward the rear of the tractor as shown then re move it and install another small plastic washer and try again. Install the nipple into the side port of the adaptor. B. For the return line from the heater, cut the lower radiator hose in the location shown and install the enclosed T fitting with large hose clamps provided. FIG. A C. Run the supplied heater hose from the T fitting along the side of the engine compartment and through one of the holes in the cowl, cut to length and attach to heater and T fitting with small hose clamps. CAUTION: Make sure hose does not rub against the exhaust. Cut hose & install T fitting here D. Use the remaining hose to run from the sending unit adaptor to the heater as shown and attach with small hose clamps. Refer to figures C and D. FIG. B FIG. C FIG. D Rev. F, p. 9 of 11

10 HEATER PLUMBING (cont d.): INDUSTRIES, LLC. E. Splice into the heater supply line and install the in-line shut-off valve. NOTE: The in-line shut-off valve quickly converts the heater into a summer time blower by preventing hot water from flowing to the heater core. Make sure the hoses will not interfere with the hood or touch the exhaust system. Secure hoses with the P clip and self-drilling screw as shown. DANGER: Use caution when installing screw into fuel tank shroud so that screw does not contact the fuel tank. Secure the rest of the hoses with large wire ties provided. Refill the cooling system. Start the tractor and inspect system for leaks. P Clip ELECTRICAL CONNECTIONS: Fig E A. At the installer s discretion, mount the two speed rotary heater switch in desired location. B. Using the bullet connectors on the supplied 18 gauge wires, connect the wires to the orange and red wires on the heater. Route the wires to the switch location and cut to length. Connect the lead from the orange motor wire to the H terminal of the switch and the lead from the red motor wire to the L terminal using female push-on connectors. Connect the black wire from the motor to ground. C. Install a female push-on connector to one end of the remaining 18 gauge red wire. Connect to the B terminal on the back of the rotary switch. Route the other end of this wire to a positive feed (through the ignition or fuse box is recommended). Attach to the in-line fuse with a butt connector. Attach the other end of the in-line fuse to the power source. WARNING *** LEAVE the C switch terminal OPEN. This is NOT a ground connection. ROTARY HEATER SWITCH SWITCH KNOB HOUSING NUT TERMINALS SIDE VIEW B H L C HEATER BACK VIEW FRONT VIEW FINISHING TOUCHES: Check heater hoses and make sure they get warm. If not, remove the heater from its mount and let hang from hoses as low as possible. Temporarily put a clamp on the upper radiator hose to force coolant through the heater. As soon as heater gets warm remove the clamp. HEATER COMPONENTS: 1 20,000 BTU MEGA BURNER HEATER 9PH20 1 HEATER MANUAL N/A 1 Rotary Heater Switch 9HR Heater wire kit N/A 1 12 ft heater hose 9HR Hose clamps 9HR /2 Hose Clamps 9HR /4 TEE 9HR Universal Sending unit adaptor 9HR0051A 1 In-Line Shut-off valve 9HR mm nylon washer N/A 2 12 mm nylon washers N/A 2 Large wire ties N/A 3 Small wire ties N/A 1 7/8 P CLIP N/A 1 Self-drilling screw N/A 1 3/8 NPT nipple 9HR0045 Rev. F, p. 10 of 11

11 INDUSTRIES, LLC. 20,000 BTU MEGA BURNER HEATER SERVICE PARTS ITEM NO. DESCRIPTION CODE NO. 1 HEATER CORE - 20,000 BTU 9PH FAN/MOTOR - 20,000 BTU 9PH VENT/LOUVER RECTANGLE 9HR-L 4 FAN GUARD - 20,000 BTU 9PH20-4 Rev. F, p. 11 of 11

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON TGX SERIES SOFT SIDED CAB ENCLOSURE (p/n MFTGXSS) This Curtis Cab is designed and manufactured for use only as reasonable weather

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 3000 SERIES (4200/4300/4400) (4210/4310/4410) & (3120/3320/3520/3720) HARD SIDED CAB ENCLOSURE (p/n 1JD3520AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 30 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KU3AS) SOFT SIDED CAB ENCLOSURE (p/n 1KU3SS) This Curtis Cab is designed and manufactured

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR E-Z-GO MPT BALL CAGE (p/n 72685-G01) The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS MASSEY FERGUSON THX FOR MASSEY FERGUSON 528, 53, AGCO ST28A, ST33A, CHALLENGER MT255B SOFT SIDED CAB ENCLOSURE (p/n MFTHXSS) This Curtis Cab

More information

KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS)

KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS) TRACTOR CAB INC. 111 HIGGINS STREET, WORCESTER, MA 01606 KUBOTA BX-1500/1800/2200 HARD SIDED CAB (p/n 1KBXAS) SOFT SIDED CAB (p/n 1KBXSS) INSTALLATION AND OWNER S MANUAL The contents of this envelope are

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. of 0 INSTALLATION & OWNER S MANUAL MASSEY FERGUSON GC2400 cab kit p/n MFGC2400 Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS FOR MASSEY FERGUSON 233, 428v (gear), 428v (hydro) SOFT SIDED CAB ENCLOSURE (p/n: MF233SS) This Curtis Cab is designed and manufactured for use

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL This Curtis Cab is designed and manufactured for use only as reasonable weather protection. This cab is not applicable, Nor should the cab be considered as protection against

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE GATOR HPX and/or XUV HARD SIDED CAB ENCLOSURE (p/n: 1GTR44AS) SOFT SIDED CAB ENCLOSURE (p/n: 1GTR44SS) 111 HIGGINS STREET, WORCESTER,

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. 1 of 6 INSTALLATION & OWNER S MANUAL YANMAR SA-424 WINDSHIELD KIT P/N 1CYSA4WS FITS SA-424 TRACTORS WITH 4 POST ROPS The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. R p. 1 of 16 INSTALLATION & OWNER S MANUAL V4211 HARD SIDED CAB KIT and/or V4275 CAMO HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. L p. 1 of 16 INSTALLATION & OWNER S MANUAL V4262 CAMO (SOFT SIDED) CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 TRANS 4 FRONT CAB KIT (p/n: KAF40T-001WA and p/n: KAF40T-001BA) NOTE: Hard sided doors, soft sided doors, and rear cab are sold

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C p. 1 of 21 INSTALLATION & OWNER S MANUAL F5205 HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner when

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. of 2 INSTALLATION & OWNER S MANUAL KUBOTA B2650/3350 Hard Sided Cab p/n KB33AS Soft Sided Cab p/n KB33SS Installation Instructions The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL INSTALLATION INSTRUCTIONS KAWASAKI MULE 4000 CAB KIT (p/n: KAF40-005WA and KAF40-005BA) NOTE: Hard sided doors are sold separately. This manual is the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. D, p. 1 of 14 INSTALLATION & OWNER S MANUAL Bobcat CT 230 and KIOTI CK30 cab kit with hard doors and soft rear curtain p/n 1BCT230 & 1KTCK30 The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. B, p. 1 of 25 INSTALLATION & OWNER S MANUAL POLARIS RANGER RCS (for models XP or HD) (for model years 2009-) cab without doors kit (p/n 1POLRCWD) cab with doors kit (p/n 1POLRC) doors only kit (p/n

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. E p. of 3 INSTALLATION & OWNER S MANUAL V446 Front Cab Kit and V446 Rear Cab Kit for RTV 40 INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. G, p. 1 of 19 INSTALLATION & OWNER S MANUAL YANMAR Sc SERIES cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC1AS Yanmar p/n: 59A40056727 Optional Hard Rear Panel Curtis p/n: SC100-06A

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL YANMAR Sc2450 cab kit with hard doors and soft rear curtain Curtis p/n: 1CYSC2450AS The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Pg. 1 of 14 INSTALLATION & OWNER S MANUAL John Deere Gator XUV 825i S4 Cab (p/n: 1GTRXUV4 Steel Cab with Doors) The contents of this envelope are the property of the owner. Be sure to leave with the owner

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 13 INSTLLTION & OWNER S MNUL Kubota X 70 Series Cab (fits X2370, X2670, and X25D) (p/n: 1KX70S Steel Cab) (p/n: 1KX70SS Vinyl Cab) The contents of this envelope are the property of the owner. e

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL Polaris Ranger 500-800 PathPro SS Cab (fits 2010 - current) (p/n: 1POLRFS1) The contents of this envelope are the property of the owner. Be sure to leave with the

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 18 INSTALLATION & OWNER S MANUAL John Deere 3 Family Premium Cab p/n: 1JD3FPR Standard Cab p/n: 1JD3FST Fits Tractor Models: 3033R, 3039R, 3046R Premium Cab Shown with Optional Front LED Work

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 13 INSTALLATION & OWNER S MANUAL Polaris Ranger 400-EV PathPro SS Cab (fits 2010 - current) (p/n: 1PRG400FS) The contents of this envelope are the property of the owner. Be sure to leave with the

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-049 Cab Enclosure MULE SX 3-4 Hours WARNING Improper installation of this accessory could result in an accident causing serious

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. L, p. 1 of 18 INSTALLATION & OWNER S MANUAL KUBOTA L3200, L3800, and L2501 WorkPro Hard Sided Cab (p/n: 1KL38AS) WorkPro Soft Sided Cab (p/n: 1KL38SS) An optional Hard Rear Panel can be purchased

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 16 INSTALLATION & OWNER S MANUAL YAMAHA VIKING CAB KIT WITH HARD DOORS p/n: 1YAMVK fits model years 2014- (fits Yanmar Bull model years 2017-) NOTE: By design, the doors are made to not be removable!

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 18 INSTALLATION & OWNER S MANUAL KUBOTA RTV 400 CAB (Not for use on RTV 500) These instructions are for installation of the complete cab as well as the modular components. DESCRIPTION:

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL p. 1 of 15 INSTALLATION & OWNER S MANUAL John Deere Gator PathPro SS Cab (fits all HPX and XUV models with the O.P.S. system installed) (p/n: 1GTRXUV) (O.P.S. = Operator Protective Structure) The contents

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 12 INSTALLATION & OWNER S MANUAL KAWASAKI MULE Pro FX-FXT CORNER FLASHER KIT p/n: 1KAPFXCFL Required Accessories: Fuse Panel: Kawasaki P/N: KAF080-076 Or Curtis P/N: 1KAPFXFP Approximate Installation

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. K, p. 1 of 19 INSTALLATION & OWNER S MANUAL V4210 CAB KIT (color: orange) and/or V4220 CAB KIT (color: camo) INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 24 INSTALLATION & OWNER S MANUAL Kubota BX80 Cab with Heater (p/n: 1KBX80CA) fits tractor models: BX1880, 2380 & 2680 Shown with front windshield wiper (comes standard with cab) Available Options:

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. K, p. 1 of 11 INSTALLATION & OWNER S MANUAL POLARIS FREEDOM CAB INSTALLATION INSTRUCTIONS FOR THE POLARIS RANGER (p/n 2876196-067) IMPORTANT: THIS ACCESSORY WEIGHS 340 POUNDS. PLEASE ADJUST THE VEHICLE

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 24 INSTALLATION & OWNER S MANUAL HONDA PIONEER 700-2 ClearView Cab p/n: 1HONP7002CV This cab fits model years up thru 2016. The contents of this envelope are the property of the owner.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL 1 of 24 John Deere 2 Family Cab p/n: 1JD2FCA Fits Tractor Models: 2032 & 2038R Available Options: 1. Front LED Work Lights (P/N: 9LEDW4) 2. Rear LED Work Lights (P/N: 9LEDW3)

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. C, p. 1 of 24 INSTALLATION & OWNER S MANUAL HONDA PIONEER 700-4 ClearView Cab p/n: 1HONP7004CV fits model years up thru 2017 The contents of this envelope are the property of the owner. Be sure to

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 22 INSTALLATION & OWNER S MANUAL Kawasaki Mule PRO-FXT p/n s: 1KAPFXTCA & 1KAPFXTCAS1 fits all Mule Pro 6-Passenger Models Cab Shown with Optional Front Wiper, Lights, and Side View Mirrors Available

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. B, p. 1 of 18 INSTALLATION & OWNER S MANUAL KAWASAKI TERYX ClearView Cab p/n: 1KAWT8002CV This cab fits model years: 2014- The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. D, p. 1 of 29 INSTALLATION & OWNER S MANUAL YAMAHA VIKING YXM 700 ClearView Cab p/n: 1YAMVKCV fits model years up thru 2018 (fits Yanmar Bull model years up thru 2018) The contents of this envelope

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-0903 Windshield Wiper Kit Mule SX 1 Hour WARNING Improper installation of this accessory could result in an accident causing

More information

SERVICE & OWNER S MANUAL

SERVICE & OWNER S MANUAL 1 of 10 SERVICE & OWNER S MANUAL Product Specifications 25 x 36 x 7 Weight: 47 lbs. Air Flow: 260 CFM Air Conditioner p/n: 1ACUNIT-G1 Fits with Curtis Roof Kit: Contact Curtis for Details. Fits with Curtis

More information

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE

JODALE PERRY. Parts List & Mounting Instructions. Jacobsen HR9016 JDP BUILT FOR LIFE JODALE PERRY Parts List & Mounting Instructions Jacobsen HR9016 JDP BUILT FOR LIFE Jacobsen HR9016 Mounting Instructions Standard Parts 1 - LH Rear Mounting Bracket 1 - RH Rear Mounting Bracket 1 - Front

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 30 INSTALLATION & OWNER S MANUAL John Deere 1 Family Premium Cab p/n: 1JD1FPR Standard Cab p/n: 1JD1FST Fits Tractor Models: 1023E and 1025R Premium Cab Shown with Optional Front LED Work Lights.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 21 INSTALLATION & OWNER S MANUAL A/C Drive Kit for KUBOTA BX2670-1 and BX2680 p/n: 1ACBX2680DRK (Note: the alternator is supplied with a new pulley) Must be installed with one of the following three

More information

Cab Kit Installation Instructions

Cab Kit Installation Instructions Low Speed Vehicles (LSV) Electric Vehicles: Carryall Carryall 6 Cab Kit Installation Instructions Publication 050770 These instructions apply to the following kit: 0670 Edition Code 008E09D GENERAL INFORMATION

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 20 INSTALLATION & OWNER S MANUAL John Deere 4 Family Premium Cab p/n: 1JD4FPR Fits Tractor Models: 4044R, 4052R, 4066R Premium Cab Shown with Optional Front Work Lights. Available Options: 1.

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Page 1 of 20 INSTALLATION & OWNER S MANUAL Massey Ferguson GC1700 Series All Steel Cab p/n: 1MFGC1700AS1 Soft Side Cab p/n: 1MFGC1700SS1 Fits Tractor Models: GC1705, GC1710, GC1715, GC1720 All Steel Cab

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL INSTALLATION & OWNER S MANUAL V5008 Kubota RTV 72 Snow Blade The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete. IMPORTANT: Please

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL P. 1 of 14 INSTALLATION & OWNER S MANUAL CAB INSTALLATION BEFORE YOU START HELPFUL REMINDERS: KUBOTA F-SERIES CAB p/n: F5206 The contents of this envelope are the property of the owner. Be sure to leave

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 18 INSTALLATION & OWNER S MANUAL (*Not including cab & other accessories) A/C Alternator Kit: Yamaha Drive & Drive2 P/N: 1ACYDR2DRK Recommended it be installed with Curtis Cab: Sandstone (p/n 1GCYD1-A,

More information

Instructions for 2-row monitoring only

Instructions for 2-row monitoring only Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect installation

More information

Instructions for 2-row monitoring only

Instructions for 2-row monitoring only Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect

More information

Kubota B2910, B7800 Boxer

Kubota B2910, B7800 Boxer Kubota B2910, B7800 Boxer Parts List & Mounting Instructions Jodale Perry Printed: 2004/12 Standard Parts List Qty Description Photo L&R Rear Brackets L&R Front Brackets 2 Front Bracket Spacers (No-Loader)

More information

DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. DOOR KIT P/N 2882561, 2882562 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these

More information

INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1. Sept 07

INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1. Sept 07 INSTALLATION GUIDE FOR THE MULE 3000 TRANS ENCLOSURE P. 1 INSTALLATION OF THE ENCLOSURE FOR THE MULE 3010 TRANS Sept 07 www.essexmfg.com PO Box 92864 Southlake, TX 76092 Ph:888-643-7739 INSTALLATION GUIDE

More information

New Holland Workmaster 25s

New Holland Workmaster 25s New Holland Workmaster 25s ROPS Cab ** Shown with optional equipment New Holland Workmaster 25s ROPS Cab This ROPS cab is designed and built to fit the New Holland Workmaster 25s tractor. Designed and

More information

WOC & WOC Top & Back Installation Instructions

WOC & WOC Top & Back Installation Instructions Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16

More information

Installation Instructions

Installation Instructions Installation Instructions Automatic Retracting Running Board Vehicle Application Ford F150 Supercrew 2001-2003 (2004 Heritage) Part Number: 75111-01 www.bestop.com - We re here to help! Visit our web site

More information

POLY TIP-DOWN WINDSHIELD KIT

POLY TIP-DOWN WINDSHIELD KIT POLY TIP-DOWN WINDSHIELD KIT P/N 2883261 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST MUSTANG

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST MUSTANG specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969-70 MUSTANG CONTROL & OPERATING INSTRUCTIONS The controls on your new Perfect

More information

INSTALLATION INSTRUCTIONS DRAWERS #240

INSTALLATION INSTRUCTIONS DRAWERS #240 INSTALLATION INSTRUCTIONS DRAWERS #240 Please read and fill out the enclosed warranty registration card to activate your warranty. SHIPMENT CONTENTS #1 Lid #2 Rear #3 Left side panel #4 Right side panel

More information

Rzr Heater System Part #

Rzr Heater System Part # Rzr Heater System Part # 2878135 NOTE: This heater unit installs below the center of the dash. If you have a radio mount kit (Polaris Part # 2876897) you may need to cut the top front corner off the mount

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS NEW HOLLAND MODELS T1530 CNH Original Parts INSTALLATION INSTRUCTIONS #710660156 ALL WEATHER CAB COMPACT TRACTORS 40273809 1 CARTON CONTENTS: ALL WEATHER CAB #710660156 Key# Part# Qty. Description 1 40274

More information

MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB

MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB MOUNTING INSTRUCTIONS JOHN DEERE GATOR NON-ROPS CAB FITS 4X2 & 6X4 GATORS A-11112, A-11224, A-11225, A-11226 MANUFACTURED BY: BOX 70 LITCHFIELD, MINNESOTA 55355-0070 (320) 693-3221 Fax: (320) 693-7252

More information

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969 CHEVROLET CAMARO/ FIREBIRD NOTE: INSTRUCTIONS DEPICT CAMARO

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969 CHEVROLET CAMARO/ FIREBIRD NOTE: INSTRUCTIONS DEPICT CAMARO specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969 CHEVROLET CAMARO/ FIREBIRD NOTE: INSTRUCTIONS DEPICT CAMARO CONTROL & OPERATING

More information

JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP)

JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP) P. 1 of 5 JOHN DEERE GATOR SWITCH PANEL INSTRUCTIONS FITS 1GTRXUV2 AND 1GTRXUV4 CABS (p/n: 1XUVSP) Note: Harness Extension Kit Required for 4 Passenger (p/n: 1XUV4WHEK) This manual is the property of the

More information

For Kioti Mechron Caution: Before using this product, read this manual and follow all safety instruction. Defender Cab Owner s Manual.

For Kioti Mechron Caution: Before using this product, read this manual and follow all safety instruction. Defender Cab Owner s Manual. ` Defender Cab Owner s Manual Model: Kioti Mechron 2200 Caution: Before using this product, read this manual and follow all safety instruction For Kioti Mechron 2200 Safety Instructions Kit Contents Tool

More information

Air Conditioner for M915 A0/A1 Truck

Air Conditioner for M915 A0/A1 Truck RD-2-4530-0 Air Conditioner for M915 A0/A1 Truck INSTALLATION INSTRUCTIONS Install refrigerant compressor per instructions provided with compressor mount kit. CAUTION: Edges of sheet metal can be sharp!

More information

SHELBY GT500

SHELBY GT500 2007-2009 SHELBY GT500 Removal of Factory Unit WARNING: 1. Radiator fluid must be handled properly. Please observe local ordinances with regards to handling and disposal. 2. Allow vehicle and components

More information

C15C C15C. Page 1 of 20

C15C C15C. Page 1 of 20 2 x Lid Front Hinge 1135 8 x M8 Bolt 8 x M8 Washer (3mm Thick) 4 x M6 Large washers 4 x M6 Spring washers 4 x M6 x 40mm Bolts 6 x M6 20mm Bolts 6 x M6 Washers 20 x Screws 2 x Lid mount gas strut bracket

More information

Jacobsen 600 Series Ransomes 700 Series

Jacobsen 600 Series Ransomes 700 Series Jacobsen 600 Series Ransomes 700 Series Parts List & Mounting Instructions Jodale Perry Printed: 2004/01 Standard Parts List Qty Description Photo L&R Rear Mounting Brackets L&R Front Mounting Brackets

More information

John Deere 4510, 4610, 4710 Boxer

John Deere 4510, 4610, 4710 Boxer John Deere 4510, 4610, 4710 Boxer Parts List & Mounting Instructions Jodale Perry Printed: 2004/02 Standard Parts List Qty Description Photo L&R Rear Mounting Brackets (Upper&Lower) L&R Front Mounting

More information

Includes: 1. High Flow Turbo Up-Pipe 1. J-Hook Block Off / Coolant Reroute 1. Coolant Hose 1. EGR Valve Block Off Plate 2. Hose Clamps 4.

Includes: 1. High Flow Turbo Up-Pipe 1. J-Hook Block Off / Coolant Reroute 1. Coolant Hose 1. EGR Valve Block Off Plate 2. Hose Clamps 4. Includes: 1. High Flow Turbo Up-Pipe 1. J-Hook Block Off / Coolant Reroute 1. Coolant Hose 1. EGR Valve Block Off Plate 2. Hose Clamps 4. Bolts & Nuts WARNING: This product is not legal for sale or use

More information

John Deere 1420, 1435, 1445 Soft Side

John Deere 1420, 1435, 1445 Soft Side John Deere 1420, 1435, 1445 Soft Side Parts List & Mounting Instructions Jodale Perry Printed: 2003/07 Standard Parts List Qty Description Photo L&R L&R Rear Cab Brackets Rear Cab Side Panels (Plastic)

More information

SCION xa 2004 SATELLITE RADIO TUNER Section I Installation Preparation

SCION xa 2004 SATELLITE RADIO TUNER Section I Installation Preparation Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner

More information

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

CANVAS DOOR KIT P/N , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. CANVAS DOOR KIT P/N 2882902, 2882903 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

Jacobsen 600, Ransomes 700 Series

Jacobsen 600, Ransomes 700 Series Jacobsen 600, Ransomes 700 Series Soft Side/ROPS Parts List & Mounting Instructions Jodale Perry Printed: 2001/11 Standard Parts List Qty Description Photo L&R Rear Mounting Brackets L&R Front Mounting

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL 1 of 37 INSTALLATION & OWNER S MANUAL Available Options: Kubota M62 TLB Cab P/N: 1KTLBM62 M62 Cab Shown 1. Rear Closeout Panel for Operation When Backhoe is Removed (P/N: 1KTLBM62RP) 2. Optional Rear Hydraulics

More information

WOC-364 Installation Instructions Ranger XP Heater System

WOC-364 Installation Instructions Ranger XP Heater System WOC-364 Installation Instructions Ranger 2011-12 XP Heater System Order of installation for a Complete Enclosure Always install the Heater System first if possible NOTE: If installing the Heater System

More information

RH INSTALL INSTRUCTIONS 2008 MODEL

RH INSTALL INSTRUCTIONS 2008 MODEL RH-800-2 INSTALL INSTRUCTIONS 2008 MODEL 1 Tips for Installing Rhinogear Products The recommended sequence for installing our Rhinogear line of products on your Rhino. This sequence will help with ease

More information

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or

P/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware

2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware Owner s Manual Model: Polaris RZR * 2008~2010 Polaris RZR 800* Cab Enclosure Kit Slam latch hardware Caution: Before using this product, read this manual and follow all safety instructions. Safety Instructions

More information

Parts List & Mounting Instructions Kubota F2260, F2560, F3060

Parts List & Mounting Instructions Kubota F2260, F2560, F3060 JODALE PERRY Parts List & Mounting Instructions Kubota F2260, F2560, F3060 JDP BUILT FOR LIFE BRACKETS, SHIELDS, ETC.: Qty Description 1 Front bracket 6 Front bracket spacers 1 Fuel spout (w/cap) 1 4 x

More information

SCION xb 2004 SATELLITE RADIO TUNER Section I Installation Preparation

SCION xb 2004 SATELLITE RADIO TUNER Section I Installation Preparation Section I Installation Preparation Part Number: PT546 52040 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Satellite Tuner 2 1 Ground Cable 3 1 Tuner Cable 4 2 Tuner

More information

& 76 CHEVROLET NOVA HEATER ONLY

& 76 CHEVROLET NOVA HEATER ONLY specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic hi l PERFECT FIT IN-DASH HEAT/ COOL/ DEFROST 1969-74 & 76 CHEVROLET NOVA HEATER ONLY CONTROL & OPERATING INSTRUCTIONS The controls on

More information

JBR MAZDASPEED

JBR MAZDASPEED Page1 james Barone Racing Aftermarket Parts and Accessories JBR 2007 2009 MAZDASPEED 3 Front Mount Intercooler Piping Kit Installation Instructions for TR8 Intercooler Tooling: o Jack, Jack Stands, Ramps

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. A, p. 1 of 13 INSTALLATION & OWNER S MANUAL Polaris Ranger (2009-) Straight UTV Steel Plow with Vehicle Mount Kit 6 Wide Snow Plow (p/n: 1POLSP) (fits the 500 H.O., 700 & 800 HD & XP) The contents

More information

Ford F-150 Supercrew A (2004 Heritage) Ford F-150 Super Cab A

Ford F-150 Supercrew A (2004 Heritage) Ford F-150 Super Cab A INSTALLATION GUIDE APPLICATION LENGTH MODEL YR PART # Ford F-150 Supercrew 79 1999-2004 75111-01A (2004 Heritage) Ford F-150 Super Cab 72 1999-2003 75111-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2

More information

RIM Hood For Aeromaster Bodies

RIM Hood For Aeromaster Bodies RIM Hood For Aeromaster Bodies Service Guide WARNING: Hood should be opened by releasing the hold-down straps, lifting the hood, and engaging the prop rod. Be sure prop rod is properly engaged before working

More information

New Holland TC 29DA, 33DA Boxer

New Holland TC 29DA, 33DA Boxer New Holland TC 29DA, 33DA Boxer Parts List & Mounting Instructions Jodale Perry Printed: 2004/10 Standard Parts List Qty Description Photo L&R Front Bracket Weldment L&R Rear Bracket Weldment 4 No-Loader

More information

INSTALLATION INSTRUCTIONS FOR COZY CAB A-1 AIR CONDITIONING KIT

INSTALLATION INSTRUCTIONS FOR COZY CAB A-1 AIR CONDITIONING KIT INSTALLATION INSTRUCTIONS FOR COZY CAB A-1 AIR CONDITIONING KIT 05-11 INSTALLATION INSTRUCTIONS A-12235 Air Conditioner Kit Cab set up instructions; This air conditioning kit is designed to be used with

More information

Mega-Flow External Damper Fans

Mega-Flow External Damper Fans Mega-Flow External Damper Fans With Cone Owner s Manual Hired-Hand, Mfg., Inc. PO Box 140 1733 County Road 68 Bremen, Alabama 35033 Part No. 4801-5402 Rev 4/08 Owners Manual Mega-Flow External Damper Fans

More information

2-row and All-row systems included.

2-row and All-row systems included. Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown above correspond

More information

Read and understand all instructions and warnings prior to installation of product and operation of vehicle.

Read and understand all instructions and warnings prior to installation of product and operation of vehicle. #F9378 Installation Instructions 1998-2000 Ford Ranger 3" Body Lift Kit Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products

More information

RH INSTALL INSTRUCTIONS

RH INSTALL INSTRUCTIONS Tips for Installing Rhinogear Products The recommended sequence for installing our Rhinogear line of products on your Rhino. This sequence will help with ease of installation and help save time by eliminating

More information