HVAC System: Engine Cooling, Controls and Communication

Size: px
Start display at page:

Download "HVAC System: Engine Cooling, Controls and Communication"

Transcription

1 Course #S-AC VCT HVAC System: Engine Cooling, Controls and Communication Participant Guide Revised: 01/24/11 Copyright 2011, General Motors Company, All Rights Reserved

2 Caution Danger: In order to reduce the chance of death, personal injury and/or property damage, carefully observe the instructions that follow: The service manuals of General Motors Company are intended for use by professional, qualified technicians. Attempting repairs or service without the appropriate training, tools, and equipment could cause death or injury to you or others. This could also damage the vehicle, or cause the vehicle to operate improperly. Proper vehicle service and repair are important to the safety of the service technician and to the safe, reliable operation of all motor vehicles. If you need to replace a part, use the same part number or an equivalent part. Do not use a replacement part of lesser quality. The service procedures we recommend and describe in this service manual are effective methods of performing service and repair. Some of the procedures require the use of tools that are designed for specific purposes. Accordingly, any person who intends to use a replacement part, a service procedure, or a tool that is not recommended by General Motors, must first establish that there is no jeopardy to personal safety or the safe operation of the vehicle. This manual contains various "Dangers," "Warnings" and "Cautions" that you must observe carefully in order to reduce the risk of personal injury during service or repair. Improper service or repair may damage the vehicle or render the vehicle unsafe. These "Dangers," "Warnings" and "Cautions" are not exhaustive. General Motors cannot possibly warn of all the potentially hazardous consequences of your failure to follow these instructions. This manual covers service procedures to vehicles that are equipped with a Supplemental Inflatable Restraint. Refer to the "Warnings" in Dangers, Warnings and Cautions in Supplemental Inflatable Restraint. Refer to Supplemental Inflatable Restraint component and wiring location views in Supplemental Inflatable Restraint before performing a service on or around Supplemental Inflatable Restraint components or wiring. Failure to follow these "Dangers," Warnings" and "Cautions" could cause air bag deployment, personal injury, or otherwise unnecessary Supplemental Inflatable Restraint repairs. In order to help avoid accidental air bag deployment and personal injury, whenever you service a vehicle that requires repair of the Supplemental Inflatable Restraint and another vehicle system, we recommend that you first repair the Supplemental Inflatable Restraint, then go on to the other system. June 2008

3 How to Complete the Audio Setup Wizard How to Complete the Connect Audio Setup Wizard Participants AW-1

4 How to Complete the Audio Setup Wizard How to Complete the Connect Audio Setup Wizard Once you have launched the course, select Meetings > Manage My Settings > Audio Setup Wizard Click Next. Click Test. Follow the directions. Click Next. AW-2

5 How to Complete the Audio Setup Wizard Choose your microphone or sound card from the dropdown list. Click Next. Click Record. Follow the directions. Click Next. Click Test Silence. Stay silent until the test is finished. Click Next. AW-3

6 Click Finish. HVAC System: Engine Cooling, Controls and Communication How to Complete the Audio Setup Wizard AW-4

7 Table of Contents Table of Contents Introduction... i-1 Module 1: Engine Cooling System Components Module 2: Heating, Ventilation and Air Conditioning Air Flow Control Module 3: Communication Networks and Air Conditioning System Sensors Instructor Name: Help Number: , prompt 1 This manual contains information about service for the Heating, Ventilation and Air Conditioning (HVAC) System and its components. Always refer to applicable vehicle service information and appropriate Dealer Technical Service Bulletins for additional information regarding system operation and diagnostic/repair procedures. When this manual refers to a brand name, a number, or a specific tool, you may use an equivalent product in place of the recommended item. All information, illustrations and specifications in this manual are based on the latest product information available at the time of publication approval. General Motors reserves the right to make changes at any time without notice. No part of this book may be reproduced, stored in any retrieval system, or transmitted in any form or by any means (including but not limited to electronic, mechanical, photocopying, and recording) without prior written permission of General Motors Company. This applies to all text, illustrations, tables and charts TC-1

8

9 Introduction Introduction i-1

10 Introduction Welcome to HVAC System: Engine Cooling, Controls and Communication Course Goal Upon successful completion of this course you will be able to apply concepts and procedures to properly diagnose Heating, Ventilation and Air Conditioning (HVAC) Systems concerns. Session Objectives Describe the Operation of Engine Cooling Components for HVAC system Describe HVAC air flow control methods Describe HVAC Communication Networks and A/C System Sensors Strategy Based Diagnostics Step 1. Understand and verify the customer concerns Step 2. Check that the vehicle is operating as designed Step 3. Conduct the Preliminary Checks-visual and operational Step 4. Perform the Diagnostic System Check-Vehicle Step 5. Check the Bulletins, Recalls and Preliminary Information Step 6. Perform the Diagnostics Step 7. Re-examine the Concern Step 8. Repair and Verify the Fix Special Instructions The diagnostic charts in this courseware are for reference only. Refer to Service Information when servicing the HVAC system and its components. i-2

11 Module 1: Engine Cooling System Components MODULE 1 Engine Cooling System Components Copyright 2011, General Motors Company, All Rights Reserved 1-1

12 Module 1: Engine Cooling System Components Module 1 Objective At the end of this module, you will be able to describe the Operation of Engine Cooling Components for HVAC system. Engine Cooling System The engine cooling components include the: Radiator Water Pump Thermostat Heater Core Coolant Surge Tank Coolant Cooling Fan NOTES: 1-2

13 Module 1: Engine Cooling System Components Radiator Heat transfer is the foundation of a vehicle s climate control system The Radiator transfers heat out of the coolant via a heat exchange process It is important that the Radiator is in good condition. It needs to be clean and free of debris like leaves, paper, dirt and grime Heat Transfer While inspecting for debris, note the condition of the cooling fins on the Radiator they should not be bent or folded over Radiator 1-3

14 Module 1: Engine Cooling System Components J Fin Straightening Tool Use fin straightening tool to correct damaged cooling fins Be sure to use the proper comb that matches the fin width of the Radiator that is being serviced This tool can also be used to straighten fins on Condensers, as well as, radiators J Fin Straightening Tool Water Pump Water Pump 1-4

15 Module 1: Engine Cooling System Components Thermostat Thermostat Thermostat placement varies according to the Engine and its design Thermostats located in the upper intake tend to allow temperatures to fluctuate more, plus or minus 6 C. (±10 F) Thermostats placed at the Radiator outlet hose or Water Pump inlet, results is tighter control, with less temperature fluctuation, plus or minus 3 C (±5 F) Heater Core The Heater Core is a heat exchanger Like the Radiator, it facilitates the heat transfer process The Heater Core transfers heat from coolant to the air entering the passenger compartment The Heater Core is located inside the HVAC housing Heater Core 1-5

16 Module 1: Engine Cooling System Components Coolant Surge Tank/Reservoir Coolant Surge Tank Some vehicles use a Coolant Surge Tank that is part of the pressurized cooling system Other vehicles have a reservoir, which is not part of the pressurized cooling system Since coolant expands and contracts when the engine fluctuates in temperature, both the Coolant Surge Tank and Reservoir can store excess coolant NOTE: Refer to Service Information (SI) for proper coolant type and fill procedures. Air Bleed During service, be aware that some engines contain an air bleed that must be opened when the system is refilled The air bleed helps prevent air from being trapped in the Engine Cooling System Air Bleed 1-6

17 Module 1: Engine Cooling System Components Coolant Coolant is used to lubricate the Water Pump shaft seal The majority of GM vehicles use DEX- Cool extended-life Coolant Extended-life Coolant contains anticorrosion properties and it prevents the water-coolant mix from freezing All GM cooling systems are sealed. A sealed system will pressurize as the engine warms the coolant. A pressurized system increases the boiling point of the coolant and water mixture DEX-COOL Antifreeze A typical mixture is 50/50 of water and coolant Some vehicles use a non-extended-life coolant; it is usually green or pink in color NOTE: Do NOT mix different types of coolants. That could lead to gelling. Cooling Fans Cooling fans facilitate the Heat Transfer process by providing air flow that moves through the Radiator and Condenser This action helps maintain proper engine temperature and supports the A/C system There are three type of cooling fans to be aware of: - Electric - Mechanical - Electro-viscous (EV) 1-7

18 Module 1: Engine Cooling System Components Electric Cooling Fan An Electric Cooling Fan usually has a relay that controls the current to the motor Electrical Cooling fans can also be controlled with Pulse Width Modulation or PWM Electric Cooling Fan Mechanical Cooling Fan Mechanical Cooling Fans are driven by a serpentine belt They are used in conjunction with the viscous clutch The clutch regulates fan speed based on engine compartment heat load Mechanical Cooling Fan 1-8

19 Module 1: Engine Cooling System Components Electro-Viscous Cooling Fan With an electro-viscous fan clutch, the Powertrain Control Module (PCM) sends a 5-volt PWM signal to a solid state relay The relay converts the 5-volt signal to a 12-volt PWM signal The PWM signal directly affects the amount of time the solenoid is energized The solenoid is internal to the fan clutch Electro-Viscous Cooling Fan When the solenoid in the fan clutch is energized, it opens the spring-loaded valve allowing fluid to flow from the storage chamber to the apply chamber of the Cooling Fan clutch When the solenoid is de-energized, the spring-loaded valve closes, blocking the path of the fluid to the coupling of the fan clutch, thus reducing fan speed NOTES: 1-9

20 Module 1: Engine Cooling System Components Video Outline: Coolant Flow The engine cooling system is designed to remove heat from engine components, while also allowing heat to travel to the passenger compartment When the vehicle starts, the Water Pump begins to circulate coolant through the engine, the cylinder head, and the heater core. As combustion starts to warm the coolant, heat is carried away through the coolant. After the temperature reaches approximately 88 degrees Celsius (190 degrees Fahrenheit), the thermostat starts to open (See Figure 1-1). This allows the hot coolant to flow through the radiator, releasing heat to the ambient air. As the coolant temperature decreases, the thermostat begins to close, and the coolant flow through the radiator is reduced. The thermostat regulates coolant flow through the radiator in order to maintain proper engine temperature. Engine Cooling System Figure 1-1 Thermostat opening 1-10

21 Module 1: Engine Cooling System Components Module 1 Summary We described the Engine Cooling System Components for the HVAC system, including the: Radiator Water Pump Thermostat Heater Core Coolant Surge Tank Coolant Cooling Fans 1-11

22

23 Module 2: HVAC Air Flow Control MODULE 2 HVAC Air Flow Control Copyright 2011, General Motors Company, All Rights Reserved 2-1

24 Module 2: HVAC Air Flow Control Module 2 Objective At the end of this module, you will be able to describe Heating, Ventilation and Air Conditioning (HVAC) air flow control methods Air Flow Through the HVAC Housing The air distribution system is comprised of passages and doors These doors control the flow of air through the Evaporator Core, Heater Core, and into the passenger compartment HVAC Housing 2-2

25 Module 2: HVAC Air Flow Control Adjusting Temperature Temperature Blend Door When the temperature setting is changed, the temperature or blend door moves inside the HVAC housing When the temperature is increased to the hot setting, the door moves, allowing more air to flow through the Heater Core When the temperature setting is colder, the door moves, decreasing the amount of air flow over the Heater Core 2-3

26 Module 2: HVAC Air Flow Control Adjusting Modes Selecting vent mode moves the door into a position that directs air out of the dash vents Vent Mode Bi-level mode changes the door position to direct air out of the floor and dash vents Bi-Level Mode Floor mode moves the door, directing air flow down through the floor vent This mode is more commonly used with heat setting Floor Mode 2-4

27 Module 2: HVAC Air Flow Control Adjusting Modes, Continued Defrost and Floor mode moves the doors into a position that directs air flow up to the windshield and down through the floor vents Defrost and Floor Mode In Defrost mode, the door moves directing all of the air flow up and out toward the windshield Defrost Mode 2-5

28 Module 2: HVAC Air Flow Control Fresh and Recirculation Modes Recirculation Modes Fresh/RECIRC modes may be one or two separate buttons depending on the vehicle They can be automatically controlled by the control head Fresh moves the recirculation door into a position that draws air from outside the vehicle into the passenger compartment Pressing the RECIRC button moves the recirculation door into a position that draws air that has already been cooled and dehumidified within the interior NOTES: 2-6

29 Module 2: HVAC Air Flow Control Film Valve Recirculation Modes The film valve contains slits that match up to openings within the HVAC housing to direct air flow One spool is driven by a motor, and the other spool is spring loaded in the opposite direction To change the mode, the motor operates to move the film to a different position, exposing other slits in the film Temperature is still controlled by a blend or temperature door Vehicles with film valves will also have cabin filters On this system, these filters must be inspected and replaced as indicated in Service Information (SI) or the Owner s Manual Cable Controlled Systems Cable-controlled systems are uncommon, but you may still see them on some vehicles These systems are mechanically actuated They use a cable that connects between the control head and the HVAC housing door A cable controlled system is usually adjustable 2-7

30 Module 2: HVAC Air Flow Control Vacuum Actuator Systems Another method used to control the movement of HVAC doors is a Vacuum Actuator System, which is used on some vehicles With this system, a rotary vacuum valve is used to direct vacuum to one of several vacuum actuators Vacuum Actuator Electric Actuators There are three types of electrical actuators: Two-Wire Three-Wire Five-Wire Two-Wire Actuator Two-Wire Actuator The Two-Wire Actuator is commonly found on RECIRC doors, they move from one extreme to the other The polarity of each wire can be reversed by the module to drive the actuator in the opposite direction Systems that use a two-wire actuator generally perform a calibration on these Actuators upon every key ON cycle 2-8

31 Module 2: HVAC Air Flow Control Electric Actuators, Continued Three-Wire Actuator A Three-Wire Actuator is typically found on temperature blend doors This actuator requires a power, a ground, and a signal wire Based on the voltage from the module, the actuator responds by moving to the commanded position A three-wire actuator cannot be calibrated Three-Wire Actuator Five-Wire Actuator Five-Wire Actuator Five-Wire actuators can come in several designs On the first design, two of the five wires supply power and ground The polarity of each of these wires can be changed to drive the actuator in either direction The remaining three wires make up a potentiometer circuit, which operates similarly to a throttle position sensor We get much more precise position information out of this type of fivewire actuator This is because it has its own internal position sensor, which provides feedback allowing the control module to monitor its position 2-9

32 Module 2: HVAC Air Flow Control Electric Actuators, Continued Stepper Motor Five-Wire Actuator Schematic Another type of Five-Wire Actuator is a Stepper Motor In this design, the HVAC control module supplies a 12-volt reference to the stepper motor Each of the four stepper motor coils is supplied a pulse width modulated signal on the low reference side by the HVAC module The motor can move the door to the requested position. Five-wire stepper motor actuators can be calibrated Tech Tip Never attempt to operate an actuator once it is removed from the HVAC housing If you do, the internal acutator gears will go beyond their designed travel limit, rendering the actuator inoperative 2-10

33 Module 2: HVAC Air Flow Control Climate Control Systems There are three types of Climate Control Systems: Single-zone Dual-zone Tri-zone Single-zone Climate Control Single-Zone Systems The Single-zone system receives inputs from various sensors and can automatically adjust blower speeds, air temperature and mode to maintain passenger comfort The control head has the Auto setting on it Dual-zone Climate Control Dual-Zone Systems This system can independently control the temperature for both the driver and the front seat passenger Some Dual-zone systems may not always display both temperatures on the control head Sometimes it is necessary to press the PASS button in order to check both the driver and front passenger temperature settings 2-11

34 Module 2: HVAC Air Flow Control Climate Control Systems, Continued Front Seat Control Rear Seat Control Tri-Zone Systems A Tri-Zone climate control system uses a self-contained rear unit with a separate evaporator, heater core and blower motor When enabled, they are controlled by either the front or rear control head Typically, the output circuits from the rear control head are sent directly to the front control head The front control head directly acts on requests from either the back or front, and it sends the request to the appropriate HVAC control module A separate blend door provides a separate control for rear seat passengers This allows adjustment of the temperature and rear blower speed separately from the front The rear module also has a separate mode control 2-12

35 Module 2: HVAC Air Flow Control Module 2 Summary In this module, we described: Heating, Ventilation and Air Conditioning (HVAC) airflow control methods, including: Vacuum Actuators Cable Controlled Film Valve Electric Actuators - Two-Wire actuators - Three-Wire actuators - Five-wire actuators Automatic climate control systems, including: Single-Zone Dual-Zone Tri-Zone 2-13

36

37 Module 3: Communication Networks and A/C System Sensors MODULE 3 Communication Networks and A/C System Sensors Copyright 2011, General Motors Company, All Rights Reserved 3-1

38 Module 3: Communication Networks and A/C System Sensors Module 3 Objective At the end of this module you will be able to: Describe Heating, Ventilation and Air Conditioning (HVAC) system communication networks and the operation of air conditioning system sensors that are used in automatic climate control systems Communication Networks There are three common communication networks found in today s vehicles: Class 2, which is being phased out High Speed, Mid Speed and Low Speed GM Local Area Networks (GMLAN) Local Interconnect Networks (LIN) A vehicle may have multiple communication networks. HVAC systems may use information from several modules to control various functions. These modules receive inputs from sensors around the vehicle to monitor the system s performance. The module, or modules, will use that information to control system functions. NOTES: 3-2

39 Module 3: Communication Networks and A/C System Sensors HVAC System Sensors System sensors for automatic HVAC operation are the: Ambient Air Temperature Sensor Inside Air Temperature Sensor Outlet Air Temperature Sensor Sunload Sensor Ambient Air Temperature Sensor Ambient Air Temperature Sensor The Ambient Air Temperature Sensor is located at the front of the vehicle, near the bumper or grille area This Sensor s input provides temperature display It also provides the HVAC controller with an input signal based on ambient air temperature A/C compressor clutch disables if temperature is at or below 0 C (32 F) The ambient air temperature sensor input also enables a more accurate temperature delivery 3-3

40 Module 3: Communication Networks and A/C System Sensors Inside Air Temperature Sensor Inside Air Temperature Sensor Typically, the Inside Air Temperature sensor is located in the dash panel or in the HVAC control The sensor has a small grille-like opening Depending on the vehicle, it can also be positioned in the headliner near the driver s door, or to the right of the steering column on the dash The Inside Air Temperature Sensor monitors the overall performance of the automatic HVAC system Outlet Air Temperature Sensor Outlet Air Temperature Sensor The Outlet Air Temperature sensor is typically located in left or right center vents or at floor vents Depending on the vehicle, it can be in various locations Outlet Air Temperature Sensors give us the immediate air temperature exiting the duct This allows the system to make adjustments to the temperature door to provide better temperature regulation 3-4

41 Module 3: Communication Networks and A/C System Sensors Tech Tip Be careful when installing ACR2000 temperature probes into these dash vents. The probes can dislodge the air temperature sensors, which could cause a customer concern ACR2000 Temperature Probes Sunload Sensor Sunload Sensor The Sunload sensor is located on upper dash near windshield It uses a photoconductive diode that provides current output It communicates with the controller, causing the controller to adjust the cooling requirement to enhance comfort This sensor also helps to control blower motor operation Sensors allow dual-zone systems to compensate for extra sunload 3-5

42 Module 3: Communication Networks and A/C System Sensors Module 3 Summary In this module, we described: Communication networks Air Conditioning System Sensors, including: - Ambient Air Temperature Sensor - Inside Air Temperature Sensor - Outlet Air Temperature Sensor - Sunload Sensor 3-6

DESCRIPTION AND OPERATION

DESCRIPTION AND OPERATION Page 1 of 10 DESCRIPTION AND OPERATION AIR DELIVERY DESCRIPTION AND OPERATION The air delivery description and operation is divided into five areas: HVAC Control Components Air Speed Air Delivery Recirculation

More information

DESCRIPTION AND OPERATION

DESCRIPTION AND OPERATION Your Current Vehicle: 1998 Ford Explorer Top / Heating, Ventilation, & Air Conditioning / Control Components / DESCRIPTION AND OPERATION DESCRIPTION AND OPERATION SECTION 412-04: Control Components 1998

More information

Different oils are used in automotive A/C systems, based on the type of refrigerant. Polyalkylene Glycol (PAG) oil is used for R-134a refrigerant.

Different oils are used in automotive A/C systems, based on the type of refrigerant. Polyalkylene Glycol (PAG) oil is used for R-134a refrigerant. Lubricants Automotive air conditioning lubricants are specially formulated because of how and where they operate. Air conditioning oils must be dry (having little or no water content) and mix with the

More information

5/12/2018 Climate Control - Control Components - Description and Operation 2009 Ford F-150 MotoLogic

5/12/2018 Climate Control - Control Components - Description and Operation 2009 Ford F-150 MotoLogic 2009 F-150 Subarticles Report a problem with this article Electronic Manual Temperature Control (EMTC) Dual-Zone Electronic Automatic Temperature Control (EATC) SECTION 412-01: Climate Control 2009 F-150

More information

Module 4: Climate Control

Module 4: Climate Control ÂÂ ÂÂ Air-Conditioning Electronic Control Unit (ECU) Â Controlling Cabin Air Temperature Servo Motors Electric Servo Motors ÂÂ Air-Conditioning Electronic Control Unit (ECU) Automatic Climate Control Sensors

More information

2001 Dodge Caravan Sport MANUAL A/C-HEATER SYSTEMS Caravan, Town & Country, & Voyager

2001 Dodge Caravan Sport MANUAL A/C-HEATER SYSTEMS Caravan, Town & Country, & Voyager SPECIFICATIONS NOTE: Information for Caravan includes the Grand Caravan. SPECIFICATIONS Application Specification Compressor Type Nippondenso 10S20H Compressor Belt Tension (1) System Oil Capacity (2)

More information

DIAGNOSIS AND TESTING

DIAGNOSIS AND TESTING 412-00-1 Climate Control System - General Information 412-00-1 DIAGNOSIS AND TESTING Climate Control System Refer to Wiring Diagrams Cell 54, Air Conditioner/Heater for schematic and connector information.

More information

Cooling System. Table of Contents

Cooling System. Table of Contents Sub-Headings Safety 2 s 2 Cautions 2 Notes 2 Introduction 2 General Specifications 2 Engine 2 Coolant 2 Routine Maintenance 2 Hose Connections 4 Radiator, Charge Air and Heater Cores 4 Cooling System Leaks

More information

SECTION Climate Control System - General Information

SECTION Climate Control System - General Information 412-00-i Climate Control System - General Information 412-00-i SECTION 412-00 Climate Control System - General Information CONTENTS PAGE DIAGNOSIS AND TESTING Climate Control System... 412-00-2 Inspection

More information

ARTICLE BEGINNING * PLEASE READ THIS FIRST * DESCRIPTION OPERATION ATC COMPUTER BLEND-AIR DOOR ACTUATOR CONTROL PANEL

ARTICLE BEGINNING * PLEASE READ THIS FIRST * DESCRIPTION OPERATION ATC COMPUTER BLEND-AIR DOOR ACTUATOR CONTROL PANEL A/C-HEATER SYSTEM - AUTOMATIC Article Text 1989 Chrysler LeBaron Sedan For m m m m m Copyright 1998 Mitchell Repair Information Company, LLC Thursday, July 03, 2003 10:15AM ARTICLE BEGINNING 1989 AUTOMATIC

More information

A/C-HEATER SYSTEM - AUTOMATIC

A/C-HEATER SYSTEM - AUTOMATIC A/C-HEATER SYSTEM - AUTOMATIC 1996 Subaru SVX 1995-96 AUTOMATIC A/C-HEATER SYSTEMS Subaru SVX * PLEASE READ THIS FIRST * WARNING: To avoid injury from accidental air bag deployment, read and carefully

More information

ASE 7 - Heating, Ventilation & Air Conditioning. Module 5 Automatic HVAC Systems

ASE 7 - Heating, Ventilation & Air Conditioning. Module 5 Automatic HVAC Systems ASE 7 - Heating, Ventilation & Air Conditioning Module 5 Acknowledgements General Motors, the IAGMASEP Association Board of Directors, and Raytheon Professional Services, GM's training partner for GM's

More information

Page 1 of 50 Section 412-00: Climate Control System General Information DIAGSIS AND TESTING 1997 Mark VIII Workshop Manual Climate Control System Special Service Tool(s) 73 Digital Multimeter 105-R0051

More information

TABLE OF CONTENTS Subject Page

TABLE OF CONTENTS Subject Page TABLE OF CONTENTS Subject Page Control Panel................................................2 Control Module..............................................6 Substitute Value Operation......................................7

More information

TC Series Cooling Systems

TC Series Cooling Systems TC Series Cooling Systems Table of Contents Table of Contents...1 List of Figures...1 Safety...2 Introduction...2 General Specifications...2 Types of Coolant...2 Routine Maintenance...2 Surge Tank Coolant

More information

2015 F-250, 350, 450, 550 Super Duty DESCRIPTION AND OPERATION Procedure revision date: 04/28/2016. Climate Control System

2015 F-250, 350, 450, 550 Super Duty DESCRIPTION AND OPERATION Procedure revision date: 04/28/2016. Climate Control System Page 1 of 9 412-00 Climate Control System General Information and Diagnostics Climate Control System 2015 F-250, 350, 450, 550 Super Duty DESCRIPTION AND OPERATION Procedure revision date: 04/28/2016 WARNING:

More information

COOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION

COOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION Cooling system component layout 26-2-2 DESCRIPTION AND OPERATION 1 Heater matrix 2 Heater return hose 3 Heater inlet hose 4 Heater inlet pipe 5 Throttle housing 6 Connecting hose 7 Throttle housing inlet

More information

A/C-HEATER SYSTEM - AUTOMATIC

A/C-HEATER SYSTEM - AUTOMATIC A/C-HEATER SYSTEM - AUTOMATIC 1993 Toyota Celica 1993 Automatic A/C-Heater Systems Celica SPECIFICATIONS SPECIFICATIONS TABLE Application Specification Compressor Type 1.6L... Nippondenso 10PA15C 10-Cyl.

More information

Program IV: ProStar TM. Performance A/C International. Series. Study Guide Performance A/C Program IV: International ProStar Series TMT

Program IV: ProStar TM. Performance A/C International. Series. Study Guide Performance A/C Program IV: International ProStar Series TMT Performance A/C International A N AV I S TA R C O M PA N Y Program IV: ProStar TM Study Guide TMT-160701 Series Study Guide Performance A/C Program IV: International ProStar Series TMT-160701 2007 International

More information

A/C-HEATER SYSTEM - AUTOMATIC

A/C-HEATER SYSTEM - AUTOMATIC A/C-HEATER SYSTEM - AUTOMATIC 1994 Volvo 960 1994 Auto. A/C-Heater System Volvo 960 A/C SYSTEM SPECIFICATIONS AUTOMATIC A/C SYSTEM SPECIFICATIONS TABLE Application Specification Compressor Type... Sanden

More information

211 Climate Control 219 PP HVAC (TWK)

211 Climate Control 219 PP HVAC (TWK) 211 Climate Control 219 PP HVAC (TWK) 8-30-02 1 These technical training materials are current as of the date noted on the materials, and may be revised or updated without notice. Always check for revised

More information

Page 1 of 54 412-00 Climate Control System General Information and Diagnostics 2006 Crown Victoria/Grand Marquis DIAGNOSIS AND TESTING Procedure revision date: 12/23/2008 Climate Control System Printable

More information

Wiring diagrams on page 29 are for reference only. For detailed vehicle wiring refer to Navistar documents.

Wiring diagrams on page 29 are for reference only. For detailed vehicle wiring refer to Navistar documents. 1 10/2014 REV 7 !!Attention!! Before performing diagnostics: Wiring diagrams on page 29 are for reference only. For detailed vehicle wiring refer to Navistar documents. Check for Fault Codes using the

More information

26 - COOLING SYSTEM CONTENTS ENGINE COOLING - DESCRIPTION... 3 ENGINE COOLING - OPERATION... 9 COOLING SYSTEM FAULTS... 1

26 - COOLING SYSTEM CONTENTS ENGINE COOLING - DESCRIPTION... 3 ENGINE COOLING - OPERATION... 9 COOLING SYSTEM FAULTS... 1 26 - COOLING SYSTEM CONTENTS Page LAND ROVER V8 DESCRIPTION AND OPERATION ENGINE COOLING - DESCRIPTION... 3 ENGINE COOLING - OPERATION... 9 FAULT DIAGNOSIS COOLING SYSTEM FAULTS... 1 REPAIR COOLANT - DRAIN

More information

2002 Taurus/Sable Workshop Manual

2002 Taurus/Sable Workshop Manual Page 1 of 69 SECTION 412-00: Climate Control System - General Information 2002 Taurus/Sable Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 02/05/2005 Climate Control System Refer to Wiring

More information

HEATING & AIR CONDITIONING

HEATING & AIR CONDITIONING VA HEATING & AIR CONDITIONING 24-1 HEATING & AIR CONDITIONING TABLE OF CONTENTS page HEATING & AIR CONDITIONING DESCRIPTION...1 OPERATION...2 DIAGNOSIS AND TESTING A/C PERFORMANCE...3 HEATER PERFORMANCE

More information

Volkswagen Golf > VW Rabbit GTI 2006-> (A5)

Volkswagen Golf > VW Rabbit GTI 2006-> (A5) Volkswagen Golf 5 2004-> VW Rabbit GTI 2006-> (A5) A/C Refrigerant System General information Note: General A/C refrigerant system servicing procedures (e.g., component/system descriptions, extracting

More information

HVAC Compressor Clutch Does Not Engage

HVAC Compressor Clutch Does Not Engage Page 1 of 6 2004 Pontiac GTO GTO (VIN V) Service Manual HVAC HVAC Systems - Manual Diagnostic Information and Procedures Document ID: 1378425 HVAC Compressor Clutch Does Not Engage Test Description The

More information

DIM Heating and Air Conditioning

DIM Heating and Air Conditioning 2014 NATEF JOB TASKS COMPLETION REQUIREMENT: P1-95% P2-70% P3-25% Student Name: DETAILED COURSE CONTENT VI. HEATING, VENTILATION, & AIR CONDITIONING A. HVAC SYSTEMS -- The student will be able to: P1 P2

More information

Fuel Fired Booster Heater

Fuel Fired Booster Heater Page 1 of 15 Published: Mar 31, 2009 Fuel Fired Booster Heater COMPONENT LOCATION - VEHICLES WITHOUT FFBH REMOTE CONTROL Item Part Number Description 1 Automatic Temperature Control (ATC) module 2 Fuel

More information

DIAGNOSIS AND TESTING

DIAGNOSIS AND TESTING 412-00-1 Climate Control System - General Information 412-00-1 DIAGNOSIS AND TESTING Climate Control System Refer to Wiring Diagrams Cell 54, Air Conditioning/Heater for schematic and connector information.

More information

ASE 7 - Heating, Ventilation, & Air Conditioning. Module 3 AC Controls

ASE 7 - Heating, Ventilation, & Air Conditioning. Module 3 AC Controls ASE 7 - Heating, Ventilation, & Air Conditioning Module 3 AC Acknowledgements General Motors, the IAGMASEP Association Board of Directors, and Raytheon Professional Services, GM's training partner for

More information

AFC 12917: Deaeration Tank Hose Rerouting. Study Guide TMT Course Code: 8438

AFC 12917: Deaeration Tank Hose Rerouting. Study Guide TMT Course Code: 8438 AFC 12917: Deaeration Tank Hose Rerouting Study Guide TMT121373 Course Code: 8438 2013 Navistar, Inc. 2701 Navistar Drive, Lisle, IL 60532. All rights reserved. No part of this publication may be duplicated

More information

A/C SYSTEM GENERAL DIAGNOSTIC PROCEDURES

A/C SYSTEM GENERAL DIAGNOSTIC PROCEDURES Article Text ARTICLE BEGINNING 1993 AIR CONDITIONING & HEAT A/C General Diagnostic Procedures Diagnosis is an important first step in A/C system servicing. To save time and effort, systems should be carefully

More information

Information on Aluminum Heater Core and/or Radiator Replacement # (Feb 24, 2005)

Information on Aluminum Heater Core and/or Radiator Replacement # (Feb 24, 2005) Document ID# 1614922 2004 Cadillac CTS Information on Aluminum Heater Core and/or Radiator Replacement #05-06-02-001 - (Feb 24, 2005) Information On Aluminum Heater Core and/or Radiator Replacement 2005

More information

Operation of the FFBH is enabled and disabled by the Automatic Temperature Control Module (ATCM).

Operation of the FFBH is enabled and disabled by the Automatic Temperature Control Module (ATCM). Page 1 of 8 Published : Apr 22, 2004 Auxiliary Heater COMPONENT LOCATIONS Item Part Number Description 1 - Fuel line connection with fuel tank 2 - Auxiliary fuel pump 3 - Fuel fired booster heater GENERAL

More information

EXTERNAL CONTROL VALVE (ECV) EQUIPPED VARIABLE A/C COMPRESSOR DIAGNOSIS PROCEDURE

EXTERNAL CONTROL VALVE (ECV) EQUIPPED VARIABLE A/C COMPRESSOR DIAGNOSIS PROCEDURE Technical Service Bulletin GROUP DATE HVAC JUNE, 2017 NUMBER MODEL(S) 17-HA-002 Multiple Models EXTERNAL CONTROL VALVE (ECV) EQUIPPED VARIABLE A/C COMPRESSOR DIAGNOSIS PROCEDURE This bulletin supersedes

More information

TMT121336EN 8355 R EPA, 2013 N13 Engine Aftertreatment System Overview for Technicians Study Guide

TMT121336EN 8355 R EPA, 2013 N13 Engine Aftertreatment System Overview for Technicians Study Guide TMT121336EN 8355 R1 2010 EPA, 2013 N13 Engine Aftertreatment System Overview for Technicians Study Guide 2010 EPA, 2013 N13 Engine Aftertreatment System STUDY GUIDE 2014 Navistar, Inc. 2701 Navistar Drive,

More information

A/C-HEATER SYSTEM - AUTOMATIC

A/C-HEATER SYSTEM - AUTOMATIC A/C-HEATER SYSTEM - AUTOMATIC 1988 Toyota Celica 1988 Automatic A/C-Heater Systems Celica * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system, use only approved refrigerant recovery/recycling

More information

Electronic Refrigerator Diagnostics

Electronic Refrigerator Diagnostics Electronic Refrigerator Diagnostics IMPORTANT SAFETY NOTICE The information in this presentation is intended for use by individuals possessing adequate backgrounds of electrical, electronic, & mechanical

More information

AIR CONDITIONER SECTION AC CONTENTS AUTO

AIR CONDITIONER SECTION AC CONTENTS AUTO AIR CONDITIONER SECTION AC CONTENTS AUTO PRECAUTIONS AND PREPARATION SRS Airbag Pretensioner Seatbelt... 4 A/C Refrigerant HFC134a Handling... 4 Compressor Oil... 4 Tube Connection... 4 O-Ring Part Number...

More information

Module 7: Cooling System Components

Module 7: Cooling System Components  Â  Basic Cooling System Components Radiators Common Types of Radiators Coolant Hoses Water Pumps Centrifugal Force Types of Drives for Water Pumps Types of Drive Belts Basic Cooling System Components

More information

VENTILATION SYSTEM SECTION VTL CONTENTS VENTILATION, HEATER & AIR CONDITIONER VTL-1 PRECAUTION... 2 PREPARATION... 4 FUNCTION DIAGNOSIS...

VENTILATION SYSTEM SECTION VTL CONTENTS VENTILATION, HEATER & AIR CONDITIONER VTL-1 PRECAUTION... 2 PREPARATION... 4 FUNCTION DIAGNOSIS... VENTILATION, HEATER & AIR CONDITIONER SECTION VTL A VENTILATION SYSTEM B C D CONTENTS E PRECAUTION... 2 PRECAUTIONS... 2 Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-

More information

S E R V I C E M A N U A L C C 3 0. Cooling System Major Components

S E R V I C E M A N U A L C C 3 0. Cooling System Major Components C C 3 0 C O O I N G Overview The cooling system on the Blue Bird Vision is designed to maintain the temperature of the engine within the optimum operating range, throughout the conditions for which the

More information

1991 TOYOTA Electrical Components MR2. evaporator. compartment. ARTICLE BEGINNING BUZZERS, RELAYS & TIMERS

1991 TOYOTA Electrical Components MR2. evaporator. compartment. ARTICLE BEGINNING BUZZERS, RELAYS & TIMERS ELECTRICAL COMPONENT LOCATOR Article Text ARTICLE BEGINNING 1991 TOYOTA Electrical Components MR2 BUZZERS, RELAYS & TIMERS A/C Compressor Clutch Relay Under right side of dash, on evaporator. Circuit Opening

More information

Two temperature sensors to protect against freezing and high head pressure in both the indoor evaporator and the outdoor condenser

Two temperature sensors to protect against freezing and high head pressure in both the indoor evaporator and the outdoor condenser The ZC 107 Zone Control System was designed to provide the perfect comfort control within the home. At the same time it was designed to make an airconditioning system work more efficiently and thereby

More information

A/C SYSTEM SPECIFICATIONS

A/C SYSTEM SPECIFICATIONS A/C SYSTEM SPECIFICATIONS A/C-HEATER SYSTEM - MANUAL 1997 Manual A/C-Heater System WARNING: To avoid injury from accidental air bag deployment, read and follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING

More information

Service Manual. Liquefied Petroleum Gas (LPG) Fuel System For 1999 and 2000 GM 7.4L Medium Duty Chassis. Website 5/29/03

Service Manual. Liquefied Petroleum Gas (LPG) Fuel System For 1999 and 2000 GM 7.4L Medium Duty Chassis. Website 5/29/03 Service Manual Liquefied Petroleum Gas (LPG) Fuel System For 1999 and 2000 GM 7.4L Medium Duty Chassis Liquefied Petroleum Gas (LPG) Fuel System For 1999 and 2000 GM 7.4L Medium Duty Chassis This manual

More information

ENGINE COOLING SYSTEM GENERAL 1. GENERAL SPECIFICATIONS ENGINE COOLING SYSTEM. undefined

ENGINE COOLING SYSTEM GENERAL 1. GENERAL SPECIFICATIONS ENGINE COOLING SYSTEM. undefined 211001 043 GENERAL 1. GENERAL SPECIFICATIONS 211001 044 211001 2. FASTENER TIGHTENING SPECIFICATIONS 211001 045 OVERVIEW AND OPERATION PROCESS 1. COMPONENT LOCATOR 1. Reserver Tank 2. Deaeration Tube 3.

More information

Engine Cooling. Cooling System Component Layout. https://myvpn.dealerconnection.com/extdealerlrprod/xml/parsexml.jsp,danainfo=gtr.fran...

Engine Cooling. Cooling System Component Layout. https://myvpn.dealerconnection.com/extdealerlrprod/xml/parsexml.jsp,danainfo=gtr.fran... Page 1 of 5 Published : Apr 28, 2004 Engine Cooling Cooling System Component Layout Item Part Number Description 1 - Heater hose, inlet and outlet 2 - Heater hose, inlet and outlet for vehicles with rear

More information

3.10 Air Conditioning (A/C) Contents

3.10 Air Conditioning (A/C) Contents 3.10 Air Conditioning (A/C) Contents 3.10 Model 208 as of M.Y. 1998 Diagnosis Page Function Test................................... 11/1 Reading Actual Values............................ 12/1 Version Code...................................

More information

CONFIGURATION DIAGRAMS

CONFIGURATION DIAGRAMS 80A-1 GROUP 80A CONFIGURATION DIAGRAMS CONTENTS OVERALL CONFIGURATION DIAGRAM...................... 80A-2 HOW TO READ CONFIGURATION DIAGRAMS.................... 80A-3 ENGINE COMPARTMENT......... 80A-4

More information

1996 AUTOMATIC A/C-HEATER SYSTEMS Acura Automatic A/C Systems

1996 AUTOMATIC A/C-HEATER SYSTEMS Acura Automatic A/C Systems Article Text Saturday, January 23, 1999 06:32PM ARTICLE BEGINNING 1996 AUTOMATIC A/C-HEATER SYSTEMS Acura Automatic A/C Systems A4 * PLEASE READ THIS FIRST * WARNING: To avoid injury from accidental air

More information

ENGINE COOLING SECTION GENERAL DESCRIPTION / 1 ENGINE COOLING. Figure 1 - Cooling System Flow

ENGINE COOLING SECTION GENERAL DESCRIPTION / 1 ENGINE COOLING. Figure 1 - Cooling System Flow SECTION 09-302.03 09-302.03/ 1 2006JA26 1. COOLANT INLET FROM RADIATOR 2. WATER PUMP SUCTION 3. COOLANT FILTER INLET 4. COOLANT FILTER OUTLET 5. COOLANT SUPPLY TO CYLINDER HEAD 6. COOLANT RETURN FROM CYLINDER

More information

4.0L CEC SYSTEM Jeep Cherokee DESCRIPTION OPERATION FUEL CONTROL DATA SENSORS & SWITCHES

4.0L CEC SYSTEM Jeep Cherokee DESCRIPTION OPERATION FUEL CONTROL DATA SENSORS & SWITCHES 4.0L CEC SYSTEM 1988 Jeep Cherokee 1988 COMPUTERIZED ENGINE Controls ENGINE CONTROL SYSTEM JEEP 4.0L MPFI 6-CYLINDER Cherokee, Comanche & Wagoneer DESCRIPTION The 4.0L engine control system controls engine

More information

EDITOR'S NOTE: This article replaces "Use PGM FI Data List to Help Troubleshoot Inoperative A/C," issued in June 2012.

EDITOR'S NOTE: This article replaces Use PGM FI Data List to Help Troubleshoot Inoperative A/C, issued in June 2012. 2001 Honda Civic 1.7L Eng LX TROUBLESHOOTING AN INOPERATIVE A/C TECHNICAL SERVICE BULLETIN Reference Number(s): 13 080J, Date of Issue: August, 2013 HONDA: '00 and later models with A/C APPLIES TO: '00

More information

512 HO M285 Engine (FrechW) Maybach Engine M285

512 HO M285 Engine (FrechW) Maybach Engine M285 512 HO M285 Engine (FrechW) 08-06-03 Maybach Engine M285 These technical training materials are current as of the date noted on the materials, and may be revised or updated without notice. Always check

More information

HEATING & AIR CONDITIONING

HEATING & AIR CONDITIONING AN HEATING & AIR CONDITIONING 24-1 HEATING & AIR CONDITIONING TABLE OF CONTENTS page HEATING & AIR CONDITIONING DESCRIPTION...1 OPERATION...1 DIAGNOSIS AND TESTING...1 A/C PERFORMANCE...1 DIAGNOSIS AND

More information

FULL AUTOMATIC TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM

FULL AUTOMATIC TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM SECTION 7D FULL AUTOMATIC TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM FATC (Full Automatic Temperature Control) is full automatic heater and airconditioning system that detects

More information

10/20/ Ford E 250 Engine Mechanical > Engine, 4.6L and 5.4L > IN VEHICLE REPAIR > Intake Manifold 5.4L

10/20/ Ford E 250 Engine Mechanical > Engine, 4.6L and 5.4L > IN VEHICLE REPAIR > Intake Manifold 5.4L 2005 Ford E 250 : Engine Mechanical > Engine, 4.6L and 5.4L > IN VEHICLE REPAIR > Intake Manifold 5.4L Intake Manifold 5.4L Listen SECTION 303 01A: Engine 4.6L and 5.4L 2005 E Series Workshop Manual IN

More information

SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED

SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED CAUTION: This vehicle will be equipped with a Supplemental Restraint System (SRS). A SRS will consist of either seat belt pre-tensioners and a driver

More information

September 2010 Dealer Service Instructions for: Customer Satisfaction Notification K17 Reprogram HVAC Control Head and Inspect/Replace Actuators

September 2010 Dealer Service Instructions for: Customer Satisfaction Notification K17 Reprogram HVAC Control Head and Inspect/Replace Actuators September 2010 Dealer Service Instructions for: Customer Satisfaction Notification K17 Reprogram HVAC Control Head and Inspect/Replace Actuators Models 2009-2010 (DS) Ram Truck (1500 series) 2010 (DJ)

More information

Antifreeze Type SYC1025 (Long life coolant) Mixing ratio (water:antifreeze) Cooling fan module Type Electric Capacity

Antifreeze Type SYC1025 (Long life coolant) Mixing ratio (water:antifreeze) Cooling fan module Type Electric Capacity 152000 083 1. SPECIFICATION Unit Description Specification Cooling system Type Water cooling, forced circulation Coolant Capacity approx. 8.5 L Radiator Core size 555W x 582.4H x 27T (over 326,250mm2)

More information

Jeep Wrangler TJ 4.0 LITER Installation instructions

Jeep Wrangler TJ 4.0 LITER Installation instructions www.jeepair.com 2000-2001 Jeep Wrangler TJ 4.0 LITER Installation instructions Important information about your system, and warranty DO NOT ADD ANY OIL TO ANY PART OF THE SYSTEM. DO NOT USE THE SIGHT GLASS

More information

2015 PSI 8.8L LPG Engine Overview. Study Guide. Course Code: 8777

2015 PSI 8.8L LPG Engine Overview. Study Guide. Course Code: 8777 2015 PSI 8.8L LPG Engine Overview Study Guide Course Code: 8777 1 2015 PSI 8.8L LPG Engine Overview Study Guide 2015 Navistar, Inc. 2701 Navistar Drive, Lisle, IL 60532. All rights reserved. No part of

More information

FULL AUTO TEMPERATURE CONTROL GENERAL 1. SPECIFICATIONS FULL AUTO TEMPERTURE CONTROL REXTON

FULL AUTO TEMPERATURE CONTROL GENERAL 1. SPECIFICATIONS FULL AUTO TEMPERTURE CONTROL REXTON 02-3 FULL AUTO TEMPERATURE CONTROL GENERAL 1. SPECIFICATIONS 02-4 OVERVIEW AND OPERATION PROCESS 1. FATC SYSTEM LAYOUT Configuration and Characteristic of A/C Controller 02-5 A/C System Related Devices

More information

HEATER, AIR CONDITIONING AND VENTILATION

HEATER, AIR CONDITIONING AND VENTILATION 55-1 GROUP 55 HEATER, AIR CONDITIONING AND VENTILATION CONTENTS GENERAL INFORMATION 55-3 FASTENER TIGHTENING SPECIFICATIONS 55-5 GENERAL SPECIFICATIONS 55-5 SERVICE SPECIFICATIONS 55-5 LUBRICANTS 55-5

More information

SEASONAL MAINTENANCE CHECKLISTS Johnson Controls

SEASONAL MAINTENANCE CHECKLISTS Johnson Controls SPRING CHECK LIST ABSORPTION CHILLERS Check starter and control panel. Leak test. Check hand valve diaphragms and replace as required. Check operation of purge unit. Change oil in the purge pump. Lubricate

More information

HEATER & AIR CONDITIONING CONTROL SYSTEM

HEATER & AIR CONDITIONING CONTROL SYSTEM VENTILATION, HEATER & AIR CONDITIONER SECTION HAC A HEATER & AIR CONDITIONING CONTROL SYSTEM B C D CONTENTS E WITH COLOR DISPLAY BASIC INSPECTION... 5 INSPECTION AND ADJUSTMENT... 5 Operational Check (Front)...5

More information

Cooling System Description and Operation

Cooling System Description and Operation Page 1 of 5 2008 Holden VE Sedan VE, WM, Caprice, Statesman, Lumina, Omega, VXR8 Service Manual Engine Engine Cooling Description and Operation Document ID: 1990377 Cooling System Description and Operation

More information

SECOND GENERATION Use this guide with unit serial number prefix beginning with BWF using Terra Power separator.

SECOND GENERATION Use this guide with unit serial number prefix beginning with BWF using Terra Power separator. Technical Information and Diagnostic Guide for SECOND GENERATION Use this guide with unit serial number prefix beginning with BWF using Terra Power separator. This guide will assist you in becoming more

More information

3.5 Air Conditioning (A/C) Contents

3.5 Air Conditioning (A/C) Contents 3.5 Air Conditioning (A/C) Contents 3.5 Model 210 Diagnosis Page Function Test................................... 11/1 Reading Actual Values............................ 12/1 Individual Flap Test...............................

More information

SPEED CONTROL SYSTEM

SPEED CONTROL SYSTEM DN SPEED CONTROL SYSTEM 8H - 1 SPEED CONTROL SYSTEM TABLE OF CONTENTS page AND SPEED CONTROL SYSTEM...1 SPEED CONTROL SERVO....2 SPEED CONTROL SOLENOID CIRCUITS...2 SPEED CONTROL SWITCHES...2 BRAKE LAMP

More information

VALEO HEVAC (P38 NRR) - System Overview

VALEO HEVAC (P38 NRR) - System Overview VALEO HEVAC (P38 NRR) - System Overview Custom Manufactured by Valeo for the P38 Range Rover as an Air condition control module option on everything except the very base model, which has only 3 rotary

More information

HVAC HOUSING - REMOVAL AND INSTALLATION

HVAC HOUSING - REMOVAL AND INSTALLATION 2005 Jeep Truck Grand Cherokee 4WD V8-4.7L VIN N Vehicle > Heating and Air Conditioning > Housing Assembly HVAC > Service and Repair > Removal and Replacement HVAC HOUSING - REMOVAL AND INSTALLATION REMOVAL

More information

When Audi engineers were designing the

When Audi engineers were designing the Audi Climate Control Part One When Audi engineers were designing the 5000 sedan for the 1984 model year, they decided to upgrade the climate control system at the same time. The pre-1984 system was based

More information

Electric Rotary Knob BILLET CONTROLS INSTALLATION INSTRUCTIONS

Electric Rotary Knob BILLET CONTROLS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS THESE ARE THE PARTS YOU WILL FIND IN YOUR BILLET CONTROL BOX You will use these parts and hardware during the next series of installation steps. Pressure Switch (engine compartment)

More information

ENGINE AND EMISSION CONTROL

ENGINE AND EMISSION CONTROL 17-1 GROUP 17 ENGINE AND EMISSION CONTROL CONTENTS.......... 17-3 GENERAL INFORMATION...... 17-3 SERVICE SPECIFICATIONS..... 17-3 TROUBLESHOOTING.......... 17-3 INTRODUCTION TO SYSTEM DIAGNOSIS.............

More information

Mini Vehicle Controller (MVC)

Mini Vehicle Controller (MVC) Mini Vehicle Controller (MVC) Mini Vehicle Controller (MVC) The MCC Mini Vehicle Controller (MVC) was developed to meet the demanding requirements of the mass transit and off-road market. The MVC was designed

More information

#97-T-20A: MIL (Service Engine Soon Telltale Lamp) On and EGR DTCs P0401, P0404, P0405, P1404 and/or P1406 in PCM Memory - (Jan 6, 2003)

#97-T-20A: MIL (Service Engine Soon Telltale Lamp) On and EGR DTCs P0401, P0404, P0405, P1404 and/or P1406 in PCM Memory - (Jan 6, 2003) #97-T-20A: MIL (Service Engine Soon Telltale Lamp) On and EGR DTCs P0401, P0404, P0405, P1404 and/or P1406 in PCM Memory - (Jan 6, 2003) Subject: Malfunction Indicator Lamp (SERVICE ENGINE SOON Telltale

More information

R-4122 Sleeper Heater/ Air Conditioner Unit. R-2550 Heater/Air Conditioner Unit RED DOT UNITS HEATER-A/C RESCUE VEHICLES

R-4122 Sleeper Heater/ Air Conditioner Unit. R-2550 Heater/Air Conditioner Unit RED DOT UNITS HEATER-A/C RESCUE VEHICLES R-2550 Heater/Air Conditioner Unit RESCUE VEHICLES The R-2550 is specifically designed for ambulances and other lighter-duty vehicles with large interior spaces to heat and cool quickly. R-2550 SPECIFICATIONS

More information

Sturdy Truck Body Poultry Shipping Truck - Operations Manual August 2003

Sturdy Truck Body Poultry Shipping Truck - Operations Manual August 2003 1.0 Introduction The Sturdy ventilation controller is designed to automatically control indoor air quality including: temperature, relative humidity, carbon dioxide and oxygen in the interior of the vehicle

More information

2005 Chevrolet Equinox LS ENGINE Engine Cooling - Equinox

2005 Chevrolet Equinox LS ENGINE Engine Cooling - Equinox 2005 ENGINE Engine Cooling - Equinox SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Coolant Heater 50 N.m 37 lb ft Heater

More information

MANUAL CONTROL / SEMIAUTO TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM

MANUAL CONTROL / SEMIAUTO TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM SECTION 7C MANUAL CONTROL / SEMIAUTO TEMPERATURE CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM CAUTION: Disconnect the negative battery cable before removing or installing any electrical unit

More information

Audi A4 Current Flow Diagram No. 44 / 1 Edition

Audi A4 Current Flow Diagram No. 44 / 1 Edition Page 1 of 16 Audi A4 Current Flow Diagram No. 44 / 1 Edition 05.2003 1.8 l - Fuel injection engine (110 kw - Motronic - 4 cylinder), engine code AVJ from model year 2002 1.8 l - Fuel injection engine (120

More information

SVE BULLETIN F-Series Super Duty with Aftermarket Auxiliary AC System Control

SVE BULLETIN F-Series Super Duty with Aftermarket Auxiliary AC System Control Q-255 2017 F-Series Super Duty with Aftermarket Auxiliary AC System Control Models Affected 2017 F-350, F-450, F-550 Chassis Cab applications with the addition of auxiliary air conditioning systems beginning

More information

# Q: Car and Truck Fix it Right the First Time Issues - (May 15, 2012)

# Q: Car and Truck Fix it Right the First Time Issues - (May 15, 2012) Page 1 of 5 6/1/ Document ID: 2850146 #10-00-89-017Q: Car and Truck Fix it Right the First Time Issues - (May 15, ) Subject: Car and Truck Fix it Right the First Time Issues Models: and Prior GM Passenger

More information

Technical Information and Diagnostic Guide

Technical Information and Diagnostic Guide Technical Information and Diagnostic Guide This guide will assist you in becoming more familiar with the working components of the NITE System and the proper steps and procedures to completely diagnose

More information

HEATER, AIR CONDITIONING AND VENTILATION

HEATER, AIR CONDITIONING AND VENTILATION 55-1 GROUP 55 HEATER, AIR CONDITIONING AND VENTILATION CONTENTS GENERAL INFORMATION 55-3 FASTENER TIGHTENING SPECIFICATIONS 55-5 GENERAL SPECIFICATIONS 55-5 SERVICE SPECIFICATIONS 55-5 LUBRICANTS 55-5

More information

37. FATC (FULL AUTO TEMP. CONTROL) CIRCUIT 6810

37. FATC (FULL AUTO TEMP. CONTROL) CIRCUIT 6810 5156 6810 37. FATC (FULL AUTO TEMP. CONTROL) CIRCUIT 6810 1) CONDENSOR FAN, AIR MIX MOTOR, SUN SENSOR, WATER TEMP SENSOR A. CONNECTOR INFORMATION 6810 5157 Connector Number (Pin Number, Color) Connecting

More information

BUZZERS, RELAYS & TIMERS

BUZZERS, RELAYS & TIMERS ELECTRICAL COMPONENT LOCATOR 1994 ELECTRICAL COMPONENT LOCATION Mazda Electrical s BUZZERS, RELAYS & TIMERS BUZZERS, RELAYS & TIMERS LOCATION ABS s Motor Relay On top of ABS pump, on right rear corner

More information

SCHEDULE E: TRAINING AIDS

SCHEDULE E: TRAINING AIDS 1.0 CONTRACT FOR X# Buses, BASE ONLY Total Price No. Qty. Description of Item Unit Price U.S. Dollars 1 X# "Type X" Buses, Base Buy (From Schedule A, column H line 161) 2 X# Optional X# year/x# mile PPA

More information

Jeep Wrangler TJ 4.0 LITER Installation instructions

Jeep Wrangler TJ 4.0 LITER Installation instructions www.jeepair.com 2002-2004 Jeep Wrangler TJ 4.0 LITER Installation instructions Kit Information These directions are for 2002-2006 model Jeep Wranglers. After 1994 every vehicle was designed for R134a refrigerant.

More information

ENGINE COOLING GROUP CONTENTS RADIATOR GENERAL DESCRIPTION SPECIAL TOOLS THERMOSTAT

ENGINE COOLING GROUP CONTENTS RADIATOR GENERAL DESCRIPTION SPECIAL TOOLS THERMOSTAT 14-1 GROUP 14 CONTENTS GENERAL DESCRIPTION 14-2 SPECIAL TOOLS 14-3 DIAGNOSIS 14-3 INTRODUCTION 14-3 TROUBLESHOOTING STRATEGY 14-3 SYMPTOM CHART 14-4 SYMPTOM PROCEDURES 14-4 ON-VEHICLE SERVICE 14-17 ENGINE

More information

DESCRIPTION AND OPERATION

DESCRIPTION AND OPERATION 412-03-1 Air Conditioning 412-03-1 DESCRIPTION AND OPERATION Air Conditioning Refrigerant flow into the evaporator core is metered The air conditioning system components are: by an evaporator core orifice

More information

ENGINE COOLING GROUP CONTENTS GENERAL INFORMATION SERVICE SPECIFICATIONS COOLANT SEALANT THERMOSTAT...

ENGINE COOLING GROUP CONTENTS GENERAL INFORMATION SERVICE SPECIFICATIONS COOLANT SEALANT THERMOSTAT... 14-1 GROUP 14 CONTENTS GENERAL INFORMATION 14-2 SERVICE SPECIFICATIONS 14-2 COOLANT 14-3 SEALANT 14-3 DIAGNOSIS 14-3 INTRODUCTION 14-3 TROUBLESHOOTING STRATEGY 14-3 SYMPTOM CHART 14-3 SYMPTOM PROCEDURES

More information

GROUP 17 CONTENTS WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES

GROUP 17 CONTENTS WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES 17-1 GROUP 17 CONTENTS ENGINE CONTROL 17-4 GENERAL DESCRIPTION 17-4 ENGINE CONTROL SYSTEM DIAGNOSIS 17-4 INTRODUCTION TO ENGINE CONTROL SYSTEM DIAGNOSIS 17-4 ENGINE CONTROL SYSTEM DIAGNOSTIC TROUBLESHOOTING

More information

Applicable vehicles: 2007 Ford Fusion 2007 Ford Milan 2007 Ford MKZ. DIAGNOSIS AND TESTING Procedure revision date: 11/17/2006

Applicable vehicles: 2007 Ford Fusion 2007 Ford Milan 2007 Ford MKZ. DIAGNOSIS AND TESTING Procedure revision date: 11/17/2006 PATH: Diagnostics > Diagnostic Routines > Powertrain > Engine > Engine Cooling Engine Cooling NOTE Applicable vehicles: 2007 Ford Fusion 2007 Ford Milan 2007 Ford MKZ SECTION 303-03: Engine Cooling 2007

More information

Understanding the Modern Automotive Air Conditioning System. Trainer: Grant Hand

Understanding the Modern Automotive Air Conditioning System. Trainer: Grant Hand Understanding the Modern Automotive Air Conditioning System Trainer: Grant Hand AUTOMOTIVE TRAINING SOLUTIONS PTY LTD Training for the future... Automotive Training Solutions IMPORTANT NOTE Copyright The

More information

2002 Buick Rendezvous - AWD

2002 Buick Rendezvous - AWD 2002 Buick Rendezvous - AWD DTC P0410 Description The control module activates the secondary air injection (AIR) system by grounding both the pump relay and the vacuum control solenoid control circuits.

More information