EMC Filter FC-CxxD Series

Transcription

1 EMC Filter FEATURES Meet IEC/EN series standard and CISPR22/EN55022 Meets requirements of railway standard EN50155 Reverse input voltage protection High efficiency up to 98% Mounting: PCB mounting, Chassis mounting, DIN-Rail mounting available Patent Protection RoHS This model applies to analog circuit which is noise-sensitive. Put on to the input of DC/DC module can ensure the module meet the EMC request of EN50155 standard. FC-CXXD is used with the MORNSUN DC/DC railway module of which rated power is less than 20W. DC/DC railway module s max. Input voltage must less than FC-CXXD s max. Voltage. Selection Guide Model Input Voltage Range (VDC) Max. output power(w) FC-1D FC-CX1D FC-3D Note: series with suffix A2S are chassis mounting, with suffix A4S are DIN-Rail mounting, for example FC-1DA4S. Input Specifications Input Voltage Operating temperature range VDC No-load Current Output Specifications FC-1D & FC-CX1D No-load FC-3D Efficiency FC-1D FC-CX1D FC-3D Max. Output Voltage Limit* Input voltage is not more than 175V VDC Note: * Products continue to work in the Max. Output Voltage Limit will be failures and damage. General Specifications Operating Temperature Storage Temperature Casing Temperature Rise load, Ta= Storage Humidity %RH Insulation Voltage -, -, leakage current<5ma, with the test time of 1 minute FC-3D Others MTBF MIL-HDBK-217F@ K hours Vibration 10 cycles in each axis, Test time in each axis: 3 minute, Frequency: 5-150Hz, amplitude: 7.5mm, acceleration: 10g IEC/EN61373 ma % VAC B/2 Page 1 of 5

2 General Specifications Casing Material Dimensions Weight FC-1D FC-CX1D & FC-3D FC-1D FC-CX1D & FC-3D Black flame-retardant heat-proof epoxy resin (UL94 V-0) Horizontal package A2S wiring package Horizontal package A2S wiring package Horizontal package/a2s wiring package/ 50.80*25.40*15.16mm 76.00*31.50*24.96mm 76.00*31.50*28.56mm 53.80*28.80*19.00mm 76.00*31.50*27.80mm 76.00*31.50*32.40mm 35g/55g/75g(Typ) 50g/70g/90g(Typ) EMC Specifications EMI CE CISPR22/EN KHz-30MHz Class B (With MORNSUN s Module) RE CISPR22/EN MHz-1GHz Class B (With MORNSUN s Module) ESD IEC/EN , GB/T Contact ±6KV/Air ±8KV perf. Criteria B RS IEC/EN , GB/T /m (With MORNSUN s Module) perf. Criteria A EMS EFT IEC/EN , GB/T ±4KV (5KHz,100KHz) perf. Criteria B Surge IEC/EN , GB/T ±2KV(1.2µs/50µs 2Ω)/±4KV(1.2µs/50µs 12Ω) perf. Criteria B CS IEC/EN , GB/T r.m.s (With MORNSUN s Module) perf. Criteria A Note: The EMC specifications test above are all tested according to the circuit of typical application. Product Characteristic Curve Design Reference 1. Typical application CY1 FC-xxxD Model CY1, CY2 FC-1D&FC-CX1D FC-3D CY2 Recommended external circuit parameters Recommend to use 100uF/20 electrolytic capacitor Recommended to use 200uF/40 electrolytic capacitors in parallel 1nF/200 Due to the difference of the power module input current, the fuse of the recommended values, please refer to the Technical Manual for the power module B/2 Page 2 of 5

3 CY Note: These applications is not supported for this model. 2. For more information Please find the application notes on FC-1D Dimensions and Recommended Layout FC-1DA2S Dimensions B/2 Page 3 of 5

4 FC-1DA4S Dimensions FC-CX1D&FC-3D Dimensions and Recommended Layout B/2 Page 4 of 5

5 FC-1DA2S & FC-B02DA2S Dimensions FC-1DA4S & FC-B02DA4S Dimensions Note: 1. Packing information please refer to Product Packing Information which can be downloaded from Packing bag number: (FC-1D), ( FC-CX1D&FC-3D), the Packing bag number of A2S/ A4S package: ; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%rh with nominal input voltage and rated output load; 3. All index testing methods in this datasheet are based on Company s corporate standards; 4. We can provide product customization service, please contact our technicians directly for specific information; 5. Specifications are subject to change without prior notice. MORNSUN Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: Fax: info@mornsun.cn B/2 Page 5 of 5