MVN Rotary Valve Actuators FOR CONTROL BALL VALVES VBG (DN15 TO DN32)

Transcription

1 MV Rotary Valve ctuators FOR COTROL LL VLVES VG (D5 TO D) PPLICTIO MV m Control Valve Rotary Valve ctuators are used with the VG -way and the VG -way Control all Valves to control hot and chilled water with glycol solutions up to 50% in heating, ventilating, and air conditioning (HVC) systems to provide two-position or modulating functions. FETURES on-spring return Floating and modulating Space saving, click-on installation no tool required Extendable position indicator for easy commissioning vailable with.5-m cable Compatible with VG control ball valves from D5 to D. ctuator can be mounted on the valve in any of four positions. SPECIFICTIOS ctuator type SPECIFICTIO DT Control ball valve rotary actuator Rotational stroke 90 ±. Fail-safe mode on-spring return, Fail in place Torque m Supply voltage 0 Vac, 50 Hz +0%/-5%; 4 Vac ±0%, 4 Vdc ±0% Environmental rating EM Mounting Click-on installation no tool required oise rating at m 5 d() max. at m. Materials Plenum-rated plastic housing Operating humidity range 5 95% RH, non-condensing mbient temp. range C Storage temp. range C Dimensions See Fig. and Fig. Weight 0. kg Electrical connections Field wiring 0 to 8 WG to screw terminals, located under the removable access cover Cable specification 0.8 to.0 mm (0 to 8 WG), Plenum-rated, 00 V, 0,.5 m (4.5 ft.) length from end of access cover Protection rating IP40 pprovals CE 7 CLERCE OVE CTUTOR 95 9 Fig.. MV dimensions, in mm U.S. Registered Trademark Copyright 07 Honeywell Inc. ll Rights Reserved E0-07GE5 R067

2 MV ROTRY VLVE CTUTORS SPECIFICTIO DT O.S. no. MV64500 C Power supply 4 Vac -5%, +0%; 50 Hz ±0% / 60 Hz DC Table. ctuators -Position (SPDT) Floating (SPDT) Control signal Modulating 0() 0 V / 0 0() V, < 0. m Power consumption Driving Holding W V W Cable length (m) Runtime (sec) 4 Vdc ±0% X X MV Vac ±0%; 50 Hz X X MV Vac +0% / -5%; 50 Hz X X MV Vac ±0%; 50 Hz 4 Vdc ±0% X MVT O.S. no. Table. ctuator accessories and replacement parts Description Replacement screw terminal block, pluggable CLERCE OVE CTUTOR CLERCE OVE CTUTOR K K D D G G O O C Fig.. MV with -way ball valve (see also Table ) Fig.. MV with -way ball valve (see also Table 4) Table. MV dimensions (in mm) with VG valves D D G K O G" G¼" G½" G" Table 4. MV dimensions (in mm) with VG valves D C D G K O G" G¼" G½" G" E0-07GE5 R067

3 MV ROTRY VLVE CTUTORS SPECIFICTIO DT MOUTIG For more-detailed information on mounting, see the Mounting Instructions (Product Literature o.: MU-049GE5) supplied with each actuator. Orientation of all in Valve The valve and actuator are delivered in the CLOSED positions by default. See Fig. 4 and Fig. 5. TYPICL OPERTIO OUTLET OUTLET OPE CLOSE FLOW -WY: CLOSED -WY: - OPE Fig. 7. Two-way valve operation Fig. 4. Two-way closed / -way open OPE CLOSE FLOW -WY: OPE -WY: - OPE Fig. 8. Three-way mixing valve operation Fig. 5. Two-way open / -way open Mounting Position To achieve the desired control performance, the actuator must be mounted on the valve in one of the permitted orientations shown in Fig. 6. IP40 Fig. 6. Permitted orientations Fig. 9. Three-way diverting valve operation WIRIG The actuators are pre-wired with.5-m cable with colors corresponding to the given model. Replacement cabling with the same technical specifications as listed in section "Specifications" on pg. may be used (preferably with the same cable colors). MV66 EUTRL 0 VC, CCW 0 VC, CW L L 4 MV6 / MV64 COMMO 4 VC, CCW 4 VC, CW MV7 ~ ~ ~/+ 4 LUE 4 V RED COMMO /- 0()... 0 V 4 4 Y Fig. 0. ccessing wiring and (MV7) DIP switch E0-07GE5 R067

4 MV ROTRY VLVE CTUTORS SPECIFICTIO DT Electrical Installation FLOTIG CTUTOR! MV6: 4 VC MV64: 4 VC/DC FLOTIG CTUTOR LUE 0 VC L 4 COTROLLER 4 -POS. / FLOTIG COTROLLER Fig.. MV6 / MV64 floating actuator with controller FLOTIG CTUTOR 4! MV6: 4 VC MV64: 4 VC/DC -POS. / FLOTIG COTROLLER Fig.. MV6 / MV64 floating actuator with - position / floating controller FLOTIG CTUTOR LUE 0 VC L Fig. 4. Wiring of MV66 floating actuator with - position / floating controller PROPORTIOL/MODULTIG: 0()...0 VDC OR 0...(0() VDC COTROLLER OUTPUT PROPORTIOL CTUTOR DIP SWITCH POSITIO MODE OFF OFF 0...0V OFF O...0V O OFF 0...V O O 0...0V RED 4 V Y OFF O O 4 VC/DC 0()...0 VDC COTROLLER 4 COTROLLER Fig. 5. MV7 proportional/modulating actuator with 0() 0 VDC controller Power supply. Provide means for disconnecting and for overload protection, as required. Fig.. Wiring of MV66 floating actuator with controller Safety isolating transformer ( ) is required. LIE VOLTGE power supply. Provide means for disconnecting and for overload protection, as required. E0-07GE5 R067 4

5 MV ROTRY VLVE CTUTORS SPECIFICTIO DT EVIROMETL DT Environmental conditions Pollution degree Protection class Table 5. Information as per E 6070 Rated impulse voltage For use in home (residential, commercial, and light-industrial) environments (MV66) (MV6 + MV7) Class II (MV66) Class III (MV6 + MV7).5 kv Mode of operation Type DISPOSL WEEE: Waste Electrical and Electronic Equipment Directive t the end of the product life, dispose of the packaging and product in an appropriate recycling center. Do not dispose of the device with the usual domestic refuse. Do not burn the device. Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.. La Pièce 6, Switzerland by its uthorized Representative: Home and uilding Technologies Honeywell GmbH öblinger Strasse 7 70 Schönaich, Germany Phone +49 (0) Fax +49 (0) E0-07GE5 R067 Subject to change without notice