PARTS MANUAL SECTION 111

Transcription

1 P - SERIES ZERO TURN MOWER MODELS P5525CT, P6124FS, P6126KP, P6127CT Published 11/15 S MANUAL SECTION 111 An Operator's Manual was shipped with the equipment. The Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Bush Hog to obtain a Free copy before operating the equipment. BUSH HOG 2501 Griffin Ave. Selma, AL Parts Ordering

2 ALPHABETICAL INDEX CONTENT PAGE NUMBER Blades, Belts, Pulleys and Puller Bars , Canopy Kit Clutch, Pulleys and Pump Belts - Kohler, Briggs & Stratton Engine Clutch, Pulleys and Pump Belt - Kawasaki Engine Control Panel and Related Parts Decal Kit Deck Lift Repair Parts , Deck, Shielding and Related Parts Electrical Wiring and Related Parts Front Caster Wheels Front Rollers, Caster Style for 61" Deck Front Rollers, Standard Fuel System and Related Parts Hitch, Rear Hydraulic Tank and Hoses - Transaxle Kawasaki Engine Service Parts Kohler Engine Service Parts Briggs & Stratton Engine Service Parts Light Kit Mainframe and Related Parts , Mulching Kits Parking Brake and Related Parts Seats, Operator Spindle Assembly Steering Controls , Tires and Wheels, Drive Transaxle Mount and Related Parts Transaxle Assy L.H Transaxle Assy R.H

3 Bush Hog Land Maintenance Repair Parts Manual November, 2015 DECK, SHIELDING and DECALS for 55 and 61 DECKS QTY. DESCRIPTION Deck Weldment 55 w/ Decals Deck Weldment 61 w/ Decals Deck Shield, L.H. 55 Deck Deck Shield, L.H. 61 Deck Deck Shield, R.H. 55 Deck Deck Shield, R.H. 61 Deck BH 7 Capscrew, 5/16 x 3/4 Gr Decal, Warning Decal, Danger Decal, Belt Installation Model Decal, 55 Deck Model Decal, 61 Deck Decal, Danger Decal, Warning Decal, Warning Non-Skid Surface Discharge Chute Assembly Discharge Chute Inner Band BH 2 Flatwasher, 7/ BH 2 Carriage Bolt, 3/8 x Outer Band Decal, Danger Discharge Chute Lockwasher, 3/ Hex Nut, 3/ BH 2 Carriage Bolt, 3/8 x 1-1/ Flatwasher, 3/ Pin, Discharge Chute Cotter Pin, 1/8 x 3/4 YZ BH 7 Flatwasher, 5/ Lockwasher, 5/ BH 2 Flatwasher, 3/8 SAE YZ

4 BELTS, BLADES, PULLEYS and PULLER BARS FOR 55 and 61 DECKS

5 BELTS, BLADES, PULLEYS and PULLER BARS FOR 55 and 61 DECKS QTY. DESCRIPTION Spindle Assembly BH 18 Carriage Bolt, 1/2 x 1-1/4 Gr. 5 YZ (61 Deck) Carriage Bolt, 1/2 x 1-1/2 Gr. 5 YZ (55 Deck) BH 18 Lockwasher, 1/2 (61 Deck) 45111BH 9 Lockwasher, 1/2 (55 Deck) BH 18 Hex Nut, 1/2 (61 Deck) 45070BH 9 Hex Nut, 1/2 (55 Deck) Idler Weldment BH 1 Carriage Bolt, 5/8 x 3-1/ Spacer Idler Deck Idler Pulley BH 6 Locknut, 5/8 Flanged Flanged Bushing BH 1 Flatwasher, 3/4 YZ BH 1 Locknut, 3/4 NF YZ Tension Rod Hex Nut, 3/ Spring, Extension BH 1 Carriage Bolt, 5/8 x 3 Gr. 5 YZ Spacer Idler Blade Washer Sheave, 6.00 for 61 Mower Deck Sheave, 5.50 for 55 Mower Deck Woodruff Key 22 Blades for 55 Deck Blade, 19 CW Parallel Uplift w/ Cut-out for 55 Mower Deck Blade, 19 CW Parallel Uplift (Opt.) for 55 Mower Deck Blade, 19 CW Mulching (Opt.) for 55 Mower Deck Blade, 19 Corner Uplift (Opt.) for 55 Mower Deck Blade, 19 Hi-Corner Uplift (Opt.) for 55 Deck Blades for 61 Deck Blade, 21 CW Parallel Uplift w/ Cut-out for 61 Mower Deck Blade, 21 CW Parallel Uplift (Opt.) for 61 Mower Deck Blade, 21 CW Mulching (Opt.) for 61 Mower Deck Blade, 21 Corner Uplift (Opt.) for 61 Mower Deck Blade, 21 Hi-Corner Uplift (Opt.) for 61 Mower Deck BH 3 Capscrew, 1/2 x 1-1/2 Gr. 8 NF BH 3 Safety Washer BH 7 Grease Fitting Drive Belt, for 55 Mower Deck Drive Belt, for 61 Mower Deck Mounting Plate (61 Deck) BH 9 Flatwasher, 1/2 YZ (61 Deck) Puller Bar Assy Pivot Weldment BH 2 Capscrew, 5/8 x 5 Gr.5 YZ BH 2 Locknut, Flanged 5/8 YZ BH 2 Capscrew 1/4 x 7/8 Gr.5 yz Locknut 1/4 YZ

6 DECK LIFT REPAIR S

7 DECK LIFT REPAIR S QTY. DESCRIPTION Mounting Bracket, Pivot Rod Front Deck Lift Weldment Foot Pedal Assembly Flange Bushing Non Skid Surface BH 1 Capscrew, 1/2 x 2-1/4 YZ Locknut, 1/2 Flanged YZ Deck Lift Weldment, Rear R.H Rod Mounting Boss Deck Lift Weldment, Rear L.H BH 6 Flatwasher, 7/ E-Ring BH 8 Hex Nut, 1/2 Flanged Deck Lift Chain, 5 Links Height Adjustment Stop Weldment BH 2 Hex Nut, 5/8 YZ BH 4 Capscrew, 3/8 x 1 YZ Flatwasher, 3/8 YZ Lockwasher, 3/8 YZ BH 4 Locknut, 3/8 YZ BH 2 Grease Fitting BH 1 Roll Pin, 1/4 x BH 4 Capscrew, 1/2 x Rod, Deck Lift Assist BH 10 Hex Nut, 5/8 YZ Oil Filled Washer Spring, Deck Lift Assist BH 2 Flatwasher, 5/8 YZ Capscrew, 1/2 x 1-1/2 YZ Bushing, Flanged, Super Oilite BH 2 Flatwasher, 3/4 YZ E-Ring, 3/ Bracket, Height Adjustment Decal, Height Adjustment Pin, Height Adjustment Capscrew, 5/16 x 3/4, Washer Hd. YZ

8 SPINDLE ASSEMBLY Spindle Housing Greasable Shaft Blade Washer Bearing Retaining Ring BH 1 Pivot Tube BH 1 Hex Nut, 5/8 YZ BH 1 Safety Washer, Heavy Duty BH 1 Capscrew, 1/2 x 1-1/2 Gr.8 NF BH 1 Grease Fitting Spindle Assy

9 FRONT ROLLER ASSEMBLY, 55 AND 61 DECK Bushing Roller, Anti-Scalp BH 1 Capscrew, 3/8 x BH 3 Locknut, 3/8 Flanged YZ Front Roller Bracket, L.H Bushing BH 2 Capscrew, 3/8 x BH 4 Capscrew, 3/8 x Lockwasher, 3/ Front Roller Bracket, R.H

10 FRONT ROLLER ASSEMBLY WITH CASTERS 61 DECK ONLY (OPTIONAL) BH 8 Carriage Bolt, 3/8 x 1 Gr.5 YZ Lockwasher, 3/8 YZ Hex Nut, 3/8 YZ Roller, Anti-Scalp Bushing, Anti-Scalp BH 1 Capscrew, 3/8 x 7 Gr.5 YZ BH 1 Locknut, 3/8 Flanged YZ Caster Arm Weldment Caster Fork Weldment Tailwheel Spacer, Short Lynch Pin, 1/4 x 1-3/ Bushing, Anti-Scalp Roller BH 1 Capscrew, 3/8 x 4 Gr.5 YZ BH 1 Locknut, 3/8 YZ BH 1 Grease Fitting Caster Assembly

11 SEATS 1 NON SUSPENSION SEAT 3 4, 5 QTY. DESCRIPTION Seat Assy. Non-Suspension Caution Decal Seat Belt Assy Armrest Kit, RH & LH Arm Pad Delta Switch 2 6 FULL SUSPENSION SEAT Seat Assy. Full-Suspension Seat Bushing Seat Belt & Strap Assy BH 2 Lockwasher, 7/16 YZ BH 2 Capscrew, 7/16 x 1 YZ Caution Decal

12 MAINFRAME and RELATED S ,

13 MAINFRAME and RELATED S Ref. Part Qty. Description No. No Platform, Assy Decal, Warning Non Skid Surface Pin, Height Adjust Decal, Height Adjust Bracket, Height Adjust Capscrew, Washerhead, 5/16-18 x 3/ Seat Platform Lynch Pin Seat Lock Pin Seat Spring BH 2 Flatwasher, 5/ ROPS Assembly Hitch Pin Assy Stop Knob Decal Warning BH 1 Capscrew, 1/2 x 3-1/2 Gr BH 5 Capscrew, 1/2 x 3-1/4 Gr BH 6 Locknut, 1/ Seat Stop Rod BH 1 Cotter Pin, 1/16 x 1/ Rear Support Decal, Bush Hog Emblem BH 4 Capscrew, 3/8 x 2-1/4 Gr BH 6 Capscrew, 3/8 x 7/8 Gr BH 4 Locknut, 3/ BH 6 Locknut, 3/8 Gr.C Faspin Grommet Decal, Bush Hog Fuel Valve Decal Model Decal P Model Decal P Model Decal P Model Decal P Frame Weldment w/safety Decal Decal, Warning Decal, Warning Battery Control Decal Rear Tube Weldment BH 4 Locknut, 5/ BH 2 Capscrew, 5/16 x 3/4 G

14

15 PARKING BRAKE and RELATED S , 5, Brake Lever Weldment Retaining Ring Double Pole Switch BH 2 Slt Pn Hd Machine Screw, #10 x 3/ Flatwasher, # Locknut, # Handle Grip Brake Cover Decal, Parking Brake Capscrew, 5/16 x 3/4 Washer Head Brake Cable, R.H. (Long) Brake Cable, L.H. (Short) BH 2 Locknut, 5/ BH 1 Flatwasher, 5/

16 STEERING CONTROLS

17 STEERING CONTROLS QTY. DESCRIPTION Flanged Mounting Bearing L.H. Pivot Weldment R.H. Pivot Weldment Damper BH 4 Locknut, M8 YZ BH 8 Capscrew, 3/8 x 3/4 YZ Handle Linkage BH 4 Capscrew, 1/4 x 1-1/ Locknut, 1/ BH 12 Locknut, 3/ BH 4 Capscrew, 3/8 x Handle Assembly, L.H Handle Assembly, R.H Flatwasher, 3/8 YZ Lockwasher, 3/8 YZ Lever BH 4 Capscrew, 3/8 x 1-3/4 YZ BH 4 Capscrew, #10 Hex Soc. Hd Locknut, # Double Pole Switch BH 2 Jam Nut, 1/4 L.H. NF BH 2 Jam Nut, 1/4 NF Spherical Rod End, R.H Linkage Rod (Order Item 7 Handle Linkage Assy.) Spherical Rod End, L.H Handle Plug Handle Grip Kit (Two Grips) Switch Mount Clevis Pin Cotter Pin, 1/8 x 3/ BH 6 Setscrew, 1/4 x 3/ BH 4 Hex Nut, 1/

18

19 FRONT CASTER WHEEL and RELATED S QTY. DESCRIPTION Ball Bearing, Flanged Radial, BH 2 Grease Fitting Sealed Ball Bearing BH 2 Locknut 5/8 Flanged Grease Cap Wheel & Tire Assembly Caster Fork Weldment BH 1 Capscrew, 5/8 x 7 Gr. 5 YZ BH 1 Locknut, 5/8 Flanged YZ

20 TIRE and WHEEL ASSEMBLIES TURF TIRE ASSEMBLIES QTY. DESCRIPTION Turf Tire 23, x 10.5 x Wheel, 12 x 8.50,.094 Negative Offset Tire and Wheel Assy BAR TIRE ASSEMBLIES QTY. DESCRIPTION Bar Tire, 23 x 10.5 x Wheel, 12 x 8.50,.094 Negative Offset Bar Tire Assy. L.H Bar Tire Assy. R.H

21 KOHLER, BRIGGS & STRATTON ENGINE CLUTCH, PULLEYS, and PUMP BELT MODELS: P5525CT, P6126KP & P6127CT Belt, Pump Drive Idler Pulley, Pump Drive Clutch Assy Sheave, engine Key,.25 x.25 x Bolt, Clutch Locking, 7/16 x 2 Gr Lockwasher, 7/16 Hi-Collar Spacer Washer Idler Spacer Clutch Stop Locknut, Flanged 1/2 Gr. C YZ BH 2 Capscrew, 5/16 x 3/4 Gr. 5 YZ BH 2 Locknut, 5/ Capscrew, 3/8 x 1-3/8 Washer Hd BH 1 Carriage Bolt, 1/2 x 3 Gr. 5 YZ Bushing, Flanged, 1/2 x 3/4 x 1-1/ Arm Weldment, Pump Idler BH 1 Flatwasher, 1/2 YZ BH 1 Capscrew, 1/2 x 2-1/4 Gr. 5 YZ Tension Spring Hex Nut, 3/8 YZ BH 1 Jam Nut, 3/8 YZ Tension Rod Clutch Washer

22 KAWASAKI ENGINE CLUTCH, PULLEYS, and PUMP BELT MODEL: P6124FS Belt, Pump Drive Idler Pulley, Pump Drive Clutch Assy Sheave, Engine Key,.25 x.25 x Bolt, Clutch Locking, 7/16 x 2-1/4 Gr Lockwasher, 7/16 Hi-Collar Clutch Washer Spacer Washer Spacer, Idler Clutch Stop Locknut, 1/2 Gr. C Flanged YZ BH 2 Capscrew, 5/16 x 3/4 Gr. 5 YZ BH 2 Locknut, 5/16 YZ BH 4 Capscrew, 3/8 x 1-1/4 YZ Lockwasher, 3/8 YZ BH 1 Carriage Bolt, 1/2 x 3 Gr. 5 YZ Bushing, Flanged, 1/2 x 3/4 x 1-1/ Arm Weldment, Pump Idler BH 1 Flatwasher, 1/2 YZ BH 1 Capscrew, 1/2 x 2-1/4 Gr. 5 YZ Tension Spring Hex Nut, 3/8 YZ BH 1 Jam Nut, 3/8 YZ Tension Rod

23 Bush Hog Land Maintenance Repair Parts Manual KOHLER ENGINE P6126KP ZERO TURN MOWERS ENGINE MODEL KT745-26HP PRO FILTRATION SPEC PS-KT November, FOR COMPLETE ENGINE REPLACEMENT OR ENGINE REPAIR S SEE YOUR NEAREST KOHLER ENGINE DEALER. QTY. DESCRIPTION Oil Filter Fuel Filter Spark Plug Air Cleaner Connector, Male Drain Tube Plug Muffler BH 4 Lockwasher, 1/4 YZ Bolt, Hex Flng M6 x 1 x 25 G 8.8 YZ Flatwasher, 1/4 YZ

24 BRIGGS & STRATTON ENGINE P5525CT ZERO TURN MOWERS ENGINE MODEL 44T G1-VERTICAL SHAFT 724CC - 25 HP COMMERCIAL TURF - 1-1/8 P6127CT ZERO TURN MOWERS ENGINE MODEL 49T G1-VERTICAL SHAFT 810CC - 27 HP COMMERCIAL TURF - 1-1/ FOR COMPLETE ENGINE REPLACEMENT OR ENGINE REPAIR S SEE YOUR NEAREST BRIGGS AND STRATTON DEALER. QTY. DESCRIPTION Oil Filter Fuel Filter Spark Plug Air Cleaner Connector, Male Drain Tube Plug Muffler BH 4 Lockwasher, 1/4 YZ Bolt, Hex Flng, M6 x 1 x 25 G 8.8 YZ Flatwasher, 1/4 YZ

25 KAWASAKI ENGINE P6124FS ZERO TURN MOWERS ENGINE MODEL FS730V-FS00-S-VERTICAL SHAFT 726CC - 24 HP - 1-1/8 FOR COMPLETE ENGINE REPLACEMENT OR ENGINE REPAIR S SEE YOUR NEAREST KAWASAKI ENGINE SERVICE DEALER Oil Filter Spark Plug Fuel Filter Pre Filter (Outer) Primary Filter (Inner) 6 N/A 1 Oil Drain Adaptor (See Kawasaki Dealer) 7 N/A 1 O-Ring (See Kawasaki Dealer) Connector, Male Drain Tube Assy Plug Muffler Assy

26

27 TRANSAXLE MOUNT and RELATED S 25, 21, L.H. Transaxle Assy, R.H. Transaxle Assy BH 2 Capscrew, 5/16 x 1 YZ Lockwasher, 5/16 YZ BH 14 Locknut, 5/16 YZ BH 2 Capscrew, 5/16 x 2-3/4 G8 YZ BH 4 Flatwasher, 5/16 YZ BH 8 Capscrew, 5/16 x 2-3/4 YZ Transaxle Spacer, Short BH 2 Capscrew, 5/16 x 4-1/4 YZ Jam Nut, 5/16 YZ Torsion Rod Transaxle Release Rod Knob BH 4 Hex Nut, 5/16 YZ BH 2 Cotter Pin, 3/32 x 1/2 YZ Transaxle Support Weldment BH 10 Hex Nut, Beveled Fan Shield Capscrew, 5/16 x 3/4 Wsh. Hd. Type YZ Locknut, 1/4 YZ BH 4 Lockwasher, 1/4 YZ Mounting Plate Flatwasher, 5/16 SAE YZ BH 4 Capscrew, 1/4 x 3/4 Gr. 5 YZ

28 TRANSAXLE ASSEMBLY R.H Transaxle Assembly R.H Hub Kit (Hub & 5 Bolts) Fan Kit (Fan & Pulley) Retaining Ring Seal, Lip 17 x 40 x Washer Bearing, Ball Seal, Lip TC4, 1 x 2.06 x Retaining Ring Kit, Charge Pump Handle, Actuating Kit, Rotation, CW QTY. DESCRIPTION Arm, Neutral Right Spring, Extension Filter, Oil Capscrew, 5/16 x 1 TW (Patch Capscrew, 5/16 x 1 SH (Patch) Washer,.343 x 1.5 x Washer,.34 x.85 x Spacer Clip, Retaining Seal, Lip.375 x.75 x Spring, Torsion Hub Puller

29 TRANSAXLE ASSEMBLY L.H Transaxle Assembly L.H Hub Kit (Hub & 5 Bolts) Fan Kit (Fan & Pulley) Retaining Ring Seal, Lip 17 x 40 x Washer Bearing, Ball Seal, Lip TC4, 1 x 2.06 x Retaining Ring Kit, Charge Pump Handle, Actuating Kit, Rotation, CW QTY. DESCRIPTION Arm, Neutral Left Spring, Extension Filter, Oil Capscrew, 5/16 x 1 TW (Patch Capscrew, 5/16 x 1 SH (Patch) Washer,.343 x 1.5 x Washer,.34 x.85 x Spacer Clip, Retaining Seal, Lip.375 x.75 x Spring, Torsion

30 HYDRAULIC TANK and HOSES QTY. DESCRIPTION Tank Assy Hydraulic Hose, Long Hydraulic Hose, Short Hose Clamp BH 2 Pan Hd. Screw, #10 x 3/4 YZ Locknut, #10 YZ

31 FUEL SYSTEM 1/4 Vent Lines and Fittings Fuel Cap, Tethered and Ratcheted Reflector Reflector Mount Plate BH 4 Pan Hd. Screw, #10 x 1/ Locwasher, # Flatwasher, 3/8 YZ Lockwasher, 3/8 YZ BH 8 Capscrew, 3/8 x 3/4 Gr.5 YZ T Fitting w / 1/4 Nipples Vacuum Break w/filter Fir Tree Mount QTY. DESCRIPTION Valve, 3 Way Fuel Line to Engine, 1/4 x Vent Line, Fuel 3/16 x Vent Line, Fuel 1/4 x Vent Line, Fuel 1/4 x Hose Clamp Fuel Line, 1/4 x Fuel Tank Assy. R.H. w/ Fittings Fuel Tank Assy. L.H. w/ Fittings Fitting w/ Screen Vent Plug Assy. w / 1/4 Nipples Grommet

32

33 CONTROL PANEL Control Panel Plate Decal, Lower Control Panel Decal, Upper Control Panel Ignition Switch Throttle Control Assy BH 6 Pan Hd. Screw, #10 x 1/2 YZ Locknut, #10 YZ Push-Pull Control PTO Switch Warning Light, Oil Pressure Plastic Plug Hourmeter Lead, Hour Meter Key Set Lockwasher, #10 YZ Flatwasher, #10 YZ Lead, Oil Pressure (Kawasaki Engines)

34 ELECTRICAL WIRING Battery, 12 Volt (Purchase Locally) Battery Hold Down Capscrew, 1/4 x 5/8 YZ BH 4 Capscrew, 1/4 x 3/4 YZ Flatwasher, 1/4 YZ BH 6 Lockwasher, 1/4 YZ BH 6 Hex Nut, 1/4 YZ Solenoid BH 1 Capscrew, 5/16 x 5-1/2 YZ BH 1 Capscrew, 5/16 x 3/4 YZ BH 1 Flatwasher, 5/16 YZ Lockwasher, 5/16 YZ Wiring Harness Assembly Battery Ground Cable Battery/Solenoid Cable Solenoid/Starter Cable Fuse Holder Bracket Harness Adaptor (Kohler/B & S Engine) Harness Adaptor (Kawasaki Engine)

35 MULCHING KIT (OPTIONAL) MULCHING KIT - 55 DECK MULCHING KIT - 61 DECK Baffle Weldment, R.H., 55 Deck Baffle Weldment, R.H., 61 Deck Baffle Weldment, L.H., 55 Deck Baffle Weldment, L.H., 61 Deck Side Plate Blade, 19 CW Mulching, 55 Deck Blade, 21 CW Mulching, 61 Deck BH 4 Capscrew, 1/4 x 3/4 YZ Carriage Bolt, 1/4 x 3/4 YZ Flatwasher, 1/4 YZ Locknut, 1/4 YZ BH 1 Capscrew, 5/16 x 3/4 YZ BH 1 Locknut, 5/16 YZ Instruction Sheet

36 WORK LIGHT KIT (Optional) Oval Working Lamp Assembly, R.H Oval Working Lamp Assembly, L.H Bulb, Halogen 12V Jumper Cord Light Mounting Bracket BH 2 Capscrew, 3/8 x 1 YZ Flatwasher, 3/8 YZ Capscrew, 5/16 x 3/4 Washer Head Rocker Switch Instruction Sheet

37 REAR HITCH ASSEMBLY (OPTIONAL) Rear Hitch Bundle Warning Decal Capscrew, 3/8 x 2-3/4 Gr. 5 YZ Flatwasher, 3/8 YZ BH 4 Locknut, 3/8 YZ BH 2 Capscrew, 3/8 x 1-1/4 Gr.5 YZ

38 Bush Hog Land Maintenance Repair Parts Manual CANOPY KIT (Optional) November, Canopy Kit, Folding Rops Note: Order Through Whole Goods

39 SERIOUS INJURY OR DEATH MAY RESULT FROM MACHINE ROLLOVER Failure to follow these instructions could result in serious injury or death. Do not operate machine on steep slopes or near drop offs. Avoid sharp and/or quick turns. Do not exceed the machine weight rating of the rops. Always use seat belt. Do not jump if machine tips. If ROPS is foldable Always keep the ROPS fully extended. WHEN ROPS MUST BE DOWN- Do not use seat belt. Drive with extra care. If equipped with seat platform, Do not operate machine without seat platform pins in place READ OPERATORS MANUAL BEFORE OPERATING & FOLLOW ALL PRECAUTIONS. (CONTACT DEALER FOR MANUAL) LOWER IMPLEMENT, STOP ENGINE AND REMOVE KEY BEFORE DISMOUNTING. NO RIDERS. DO NOT OPERATE MOWER IN VICINITY OF OTHER PERSONS. ALLOW NO CHILDREN OR UNQUALIFIED PERSONS TO OPERATE EQUIPMENT. CLEAR MOWING AREA OF DEBRIS. KEEP SHIELDS AND GUARDS IN PLACE. KEEP CLEAR OF DRIVES AND BELTS SECURELY SUPPORT MOWER & REMOVE KEY BEFORE WORKING UNDERNEATH. KNOW HOW TO STOP TRACTOR AND EQUIPMENT QUICKLY IN AN EMERGENCY. BE CAREFUL ON UNEVEN TERRAIN DECREASE SPEED WHEN TURNING DO NOT EXCEED 100 LBS. (45 KG) TONGUE WEIGHT. DO NOT EXCEED 350 LBS. (158 KG) TOWING WEIGHT. TOW ONLY ON LEVEL TERRAIN SHUT OFF ENGINE BEFORE REFUELING NEVER FILL FUEL TANK INDOORS OR WHEN ENGINE IS HOT. WIPE UP ALL SPILLED FUEL BEFORE STARTING ENGINE. DO NOT SMOKE WHILE REFUELING Bush Hog Land Maintenance Repair Parts Manual November, 2015 DECAL KIT Models: P5525CT, P6124FS, P6126KP, P6127CT WARNING TO AVOID SERIOUS INJURY OR DEATH FRONT Off Left Right Fuel Tank Selection HYDROSTATIC FLUID 20W - 50 MOTOR OIL ONLY BELT INSTALLATION GUIDE /2" 4 1/4" 4" 3 3/4" 3 1/2" 3 1/4" 3" 2 3/4" 2 1/2" 2 1/4" 2" 1 3/4" 1 1/2" TO AVOID SERIOUS INJURY OR DEATH WHEN TOWING: Ref. Part Description Qty. No. No. Req,d Decal Kit Decal, Danger Decal, Danger Decal, Warning Decal, Warning Decal, Warning Decal, Warning Decal, Warning Decal, Warning Decal, Belt Installation Decal, Caution Decal, Parking Brake Decal, Speed Control Decal, Fuel Decal, Bush Hog, Decal, Warning - Rops Decal, Fuel Valve Decal, Oil Decal, Discharge Chute 1 Ref. Part Description Qty. No. No. Req,d Reflector Decal, Control Panel-Upper Decal, Control Panel-Lower Decal, Hog Emblem Decal, Belt Installation Guide Decal, Pump Drive Belt Installation Decal, Fuel Valve Decal, Parking Brake Decal, Cut Height Decal, Speed Control 2 29 D859 Decal, Genuine Parts Warning Decal, Warning Decal, Model - P Decal, Model - P Decal, Model - P Decal, Model - P Decal, 55 Commercial Decal, 61 Commercial

40

41

42 2501 Griffin Ave. Selma, AL (334) (334) Parts Ordering Fax