GROW TO THE MAX. Gromax Enterprises Corporation (800) CAT. 0116

Size: px
Start display at page:

Download "GROW TO THE MAX. Gromax Enterprises Corporation (800) CAT. 0116"

Transcription

1 GROW TO THE MAX Gromax Enterprises Corporation (800) CAT. 0116

2 GROMAX CNC EDM Gromax Enterprises Corporation offers you optimum reliability & performance that has been gained through 20-year experience MACHINES CNC P55+E90 CNC P64+E90 CNC P147+E120 CNC P188+E120 CNC301+E120 CNC301+E120-2H TABLE Dimensions 32 X x24 67 x37 73 x x43 Longitudinal & Traversal Travel 19.6 X 15.7 NA NA NA NA Column Travel NA 24 x18 55 x28 71 x x40 Max. Work Piece WT lb 4400 lb 8360 lb lb lb WORK TANK (LxWxH) Inside Dimension 46 X 27 X x37 x20 87 x52 x x52 x x67 x32 WORKHEAD Quill Travel / 39 optional 39 Distance Table Top to Electrode Plate Surface 11 ~26 12 ~28 22 ~41 18 ~41 ~53 Max Electrode Wt (lbs) 500 lb 550 lb 990 lb 1100 lb 1100 lb PACKING DIMENSION (LxWxH) Machine Base 53 x65 x93 68 x71 x x138 x x142 x X 181 X Net Weight 4200 lb 7920 lb lb lb 36,000 lb 40,000 lb DIELECTRIC RESERVOIR 137 Gallons 254 Gallons 540 Gallons 717 Gallons 1730 Gallons GENERATOR Max. Machining 90A 90A 120A 120A 120A/ 180A 120A (x2) Price Optional Accessories: 1) 3R C Axis EROWA C Axis Hirschmann C Axis $POR 2) 3R ATC EROWA Atc Hirschmann ATC $POR page 8 3)4th Axis (refer to Yuasa Programmable Rotary Table with UDNC-M1 controller DMNC 170 $POR center ht:5.12 DMNC 220 $POR center ht:6.30 DMNC 280 $POR center ht:7.48 DMNC 5C $POR center ht: Shown 5C Shown For AC & DC Servo Model

3 GROMAX ZNC EDM Z-axis programmable EDM See page 4 & 5 for ZNC EDM prices. Fuzzy Logic Control EDM & ACCESSORIES LINEAR GUIDE WAY and BALL SCREWS are used on Gromax column type & all CNC EDM machines Model (column type) Price ZNC110+E300 $176, Machine Base Ball screw standard on all 3-axis X, Y, and Z. For extra smooth movement. Meehanite casting, V-fl at turcite coated ways. DC Servo motor drive. Max workpiece from 1,500 ~ 22,000 lbs. ZNC Power Generator Heavy Duty 50~300 Amp. power supplies Standard 3-Axes Digital Readout System built-in Auto depth control Memory capacities store up to 100 sets of EDM parameters. Each consists of 10 steps. Computer shift from one step to the next automatically to eliminate operator stand-by. Fuzzy Logic System offers the ultimate security by monitoring machining condition to prevent workpiece from arcing. Self adjusting parameters compensate machining condition automatically to bring out the best possible fi nish. Both copper and graphite electrode materials cut fast and accurate Deep hole machining on-screen programming Low electrode wear; maintenance free Other Custom-Made EDM Models Available Long X-axis Travel Type Professional EDM Machine Tool Repair/Services Picture shows OLD Cincinnati EDMs retrofitted with brand new Gromax power supply. More than 25 years experience in service and rebuilding of EDM equipment such as ELOX, Cincinnati, Hansvedt, Eltee Pulsitron, Japax, Charmilles, and most Taiwanese imports. As well as many other types of Industrial Machinery & Control Systems. Basic labor charges start at reasonable rate and all work is fully guaranteed. Now, for a limited time only, we are offering 10% off our already low price for the first-time customers. Other services available include: *Design + prototyping of specialized machinery & Sensing devices for custom applications. *Replacement of OBSOLETE EDM power supplies. *Custom + Turnkey Systems. *Service Area: Unites States, Mexico, Central America, and Canada. TWIN-HEAD EDM Twin Z-Axis Type Call us at or for a free evaluation and consultation. References available to serious inquirers. page 9

4 GROMAX ZNC EDM / Conventional EDM (Ram Type) Ball screws are standard features from model P26+E75 and up! Reliability Begins with Quality All Gromax machine frames are made of MEEHANITE casting for maximum rigidity & accuracy X-Y slideways are hardened and ground. V-Flat design and faced with " TURCITE-B" for smooth sliding and wear resistance Table locks for X-Y are of the non-distortion type Fuzzy Logic Control Model (ram type) Price P26+E75 $28, page 10 Model (ram type) Price ZNC46+E100 $42, MACHINES ZNC26/P26 ZNC46/P46 ZNC56/P56 TABLE Dimensions x x x19.69 Longitudinal & Traversal Travel x x x19.69 Max. Work Piece (LxWxH) 30 x 19 x x 24 x x 35 x 23 Max. Work Piece WT Lbs 3300 Lbs 8800 Lbs WORK TANK (LxWxH) Inside Dimension 31 x 20 x x 25 x x 36 x 24 WORKHEAD Backslide Travel Quill Travel /13.78 * Max. Distance Table Top to Electrode Plate Surface Max Electrode Wt (lbs) PACKING DIMENSION (LxWxH) 57 x58 x87 58 X 57 X x70 x110 Net Weight 2424 Lbs 3520 Lbs 6900 Lbs DIELECTRIC RESERVOIR Outside Dimension (LxWxH) N/A x x x71 x24 Capacity 53 Gal 79 Gal 262 Gal Cartridge Filter Net Weight N/A 200 Lbs 660 Lbs Packing Dimension (LxWxH) N/A x39.37 x x79 x32 GENERATOR E75 E100 E150 Maximum Machining 75A 100A 100A Current Power Input 9KVA 10KVA 10KVA Practical Material 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H Removal Rate W/O Wear Maximum Material Removal Rate 2.1In 3 /H 2.9In 3 /H 2.9In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% Best Surface Finishing U/Rmax Generator Net Weight 500 Lbs 550 Lbs 550 Lbs Packing Dimension (LxWxH) 35x29x79 Conventional EDM P26+E75 P46+E100 P56+E100 Price $28, $31, NA ZNC ZNC26+E75 ZNC46+E100 ZNC56+E150 Price $34, $42, $63, All Gromax Conventional EDM machines are equipped with 3 axis DRO.

5 GROMAX ZNC EDM / Conventional EDM (Column Type) Ball screws are standard features from model P26+E75 and up! Fuzzy Logic Control Fuzzy Logic Control Model (column type) Price ZNC60+E100 $98, Model (column type) Price ZNC110+E300 $176, MACHINES ZNC60/P60 ZNC70/P70 (ZNC62/P62) ZNC80/P80 (ZNC66/P66) ZNC110/P110 (ZNC76/P76) ZNC130/P130 (ZNC86/P86) TABLE Dimensions x x x x x39.37 Longitudinal & Traversal Travel x x x x x39.37 Max. Work Piece (LxWxH) 57 x 34 x x 42 x x 45 x x 58 x x 60 x27 Max. Work Piece WT Lbs Lbs 13000Lbs 22000Lbs Lbs WORK TANK (LxWxH) Inside Dimension 58 x 35 x x 43 x x 46 x x 59 x x 61 x 28 WORKHEAD Quill Travel / * 17.7 /23.62 * Max. Distance Table Top to Electrode Plate Surface /38.58 */48.42 * /34.64 */ * page /43.7 */49.6 * Max Electrode Wt (lbs) PACKING DIMENSION (LxWxH) Machine Base 81 x70 x x92 x x98 x x90 x x 89 x 107 Head & Shoulder - 90 x40 x x46 x x36 x x41 x100 Work tank x72 x x85 x79 Net Weight 7700 Lbs Lbs Lbs Lbs Lbs DIELECTRIC RESERVOIR Outside Dimension Tank x54.2 x x74 x x50 x x61 x x65 x72 Tank x54.2 x x 76 x x50 x x61 x x 71 x 77 Capacity 413 Gal 490 Gal 529 Gal 792 Gal 910 Gal Cartridge Filter Net Weight 660 Lbs 990 Lbs Lbs 1100 Lbs Lbs 1760 Lbs+1760 Lbs 2200 Lbs Lbs Packing Dimension (LxWxH) 64.5 x62.2 x x76 x43 (x2pcs) 123 x57 x82 (x2pcs) 129 x69 x89 (x2pcs) 142 x 78 x 85 (x2pcs) GENERATOR E100 E150 E150 E300 E300 Maximum Machining 100A 150A 150A 300A 300A Current Power Input 10KVA 15 KVA 15 KVA 30KVA 30KVA Practical Material Removal Rate 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H 0.5In 3 /H W/O Wear Maximum Material Removal Rate 2.9In 3 /H 5.12In 3 /H 5.12In 3 /H 7.68In 3 /H 7.68In 3 /H Max. Electrode Wear 0.5% 0.5% 0.5% 0.7% 0.7% Best Surface Finishing U/Rmax ~ ~ ~ ~0.5 Generator Net Weight 550 Lbs 650 Lbs 650 Lbs 1450 Lbs 1450 Lbs Packing Dimension (LxWxH) 47 x32 x79 68 x 40 x88 68 x 40 x88 68 x 40 x90 68 x 40 x90 Conventional EDM P60+E100 P70+E150 P80+E150 P110+E300 P130+E300 Price NA NA NA NA NA ZNC EDM ZNC60+E100 ZNC70+E150 ZNC80+E150 ZNC110+E300 ZNC130+E300 Price $98, $106, $151, $176, $198,000.00

6 GROMAX Super Drill EDM Please visit for used EDM and great saving EDM. (SD-32) Maximum stability of workhead feed 60 Amps. maximum machining current Heavy duty stainless work table Auto depth control Super fast speed; low electrode wear One V one flat, Turcite B coated slide ways Micro computer control, MOS-FET special circuit design Maximum distance between table surface and electrode holder: SD-32Y shown Fast and accurate deep hole drilling application with capacity from " " (0.2 mm mm) in diameter or bigger capacity with 120amp power supply Specifications SD-32Y SD-35Y SD-45Y Drilling Capacity Work Table Size (L x W) x x x 11.8 Maximum Work Piece (L x W x H) x x Maximum Travel (X x Y) x x X Quill Servo Travel Z Backslide Travel Z Manual Guide Holder Travel Dielectric Capacity 5.26 Gal. x Gallons x Gallons x 2 Dielectric Ionized Water Ionized Water Ionized Water Maximum Workpiece Weight 1320 lbs. 880 lb. 1,100 lb Machine Dimensions (L x W x H) x x x 42.5 x x 55.1 x 86.6 Power Power input 3 KVA Supply Max. Machining Current 50A On Time 12 Steps Off Time 10 Steps Peak Current Setting 16 Steps Price $25, $29, $33, Test Burn Table (through hole): Depth Workpiece Electrode Tube Machine Time Brass Tubing 1 Steel 1.0mm SD32 33 sec 0.5 Steel 3.0mm SD32 58 sec Steel 0.7mm SD20P/ 16P 40 sec Aluminum 0.7mm SD20P/ 16P 30 sec Steel 0.2mm SD20P/ 16P 90 sec 0.79 Steel 0.4mm SD20P/ 16P 34 sec 1 Steel 1.0mm SD20P/ 16P 35 sec page 12 SD-45Y shown Micro computer Control New Panel Fully Digital Panel 3-Axis DRO & Auto Depth Control EDM Parameters Save & Read Can Be Mounted on Column Control Panel Multiple display functions for Dimension, EDM parameter and machining depth setting Machining stability adjustment: Fine tune and stabilize machining conditions result in finer surface finish Inch/metric conversion " resolution Auto quill retract Center positioning Machining time timer EDM parameters recall Edge find EDM parameter memory bank stores up to 480 different settings for steel, carbide, and aluminum. Some parameters are preloaded in memory, user can use these parameters as reference for testing, editing, and recording new data accordingly.

7 GROMAX Micro Drill EDM Save & recall machining data: steel, carbide & aluminum. Ball screws and slide way on X, Y & Z axis, Manual back slide Table type EDM drill for small work pieces. Newest power supply allows for small holes. Drilling capacity:from 0.03mm to 1.5mm ( ~0.059 ). (0.0012, carbide electrode.) MD20 is good for R&D laboratory. Inch/ Metric conversion, 1/2 function & machining timer, Edge finder, Auto depth control and retrace. 3 axes DRO GROMAX Portable Drill EDM PD-16Y (PD-16Y) Maximum stability of workhead feed 120 Amps. Max. machining current Super fast speed; low electrode wear Can be moved to location for difficult application Micro computer control, MOS-FET special circuit design Distance between table surface and electrode holder: Standard Accessories: 3-axes Digital Readout System Auto-Depth Control 50 Amps. Power Current Use distilled water as dielectric 1.0 MM Ceramic Guide (1 pc) 1.0 MM Brass Tubing (10 pcs) Work Lamp (1 pc) Tool Box & Tools (1 set) Coolant Pump & Tank (1 set) Plastic Shield (1 set) Model MD20 Capacity of drilling 0.03mm~1.5mm Table size 8.8 x 8.8 Max. workpiece size 12 x 12 x 6 Table travel (X, Y) 8 x 4 RAM backslide 5.3 Quill servo travel 10.2 Dielectric capacity 7 Gallon + 7Gallon Max. power rating 1.5 KVA Max. Current 15 amp Work load 110 LB Layout (LxWxH) 56 x56 x79 Gross weight 1,500 LB Price $40, Machining Time: 15 min. Workpiece: Carbide CD650 76mm (2.99 ) Electrode Dia:.5mm (0.019 ) Copper Tube Hole Dia.: Top.58mm Bottom.56mm (0.023 / ) Workpiece: Carbide VD 20 11mm (0.43 ) Electrode Dia:.2mm ( ) Copper Tube Hole dia.: Top.28mm Bottom.27mm / ) Machining Time: 6 min. Machining Time: sec. Workpiece: Electrode Dia: Hole dia. Model Price MD20 $40, EDM & ACCESSORIES Stainless steel, 0.3mm (0.012 ).05mm( ) Copper Tube.07mm( ) Model Price PD-16Y (50amp.) $17, High pressure pump included A: EDC30K B: EDC65K C: EDC15 High Pressure Pump Model: HPP.CK $2, High Pressure Rotary Spindle (Drill Chuck Type) Model: HPRS $1, ~0.5/0.5~1 1~2/ 2~3/ 3~4 4~5/5~6mm High Pressure Rotary Spindle (ER Collet Chuck Type with ER16 collet set of 7) Model: HPRS.C $1, Drill EDM Filter Model: FLT-SD $15.00 High Pressure Pump Model: HPP.FT $1, page 13 D: EDC30 E: EDC30U F: EDC60U GROMAX Drill Chuck (optional) A B C D E F Price Key Type (0.3mm~3.0mm) $ Model: EDC30K Key Type (0.3mm~6.5mm) $ Model: EDC65K Keyless Type (0mm~1.5mm) $ Model: EDC15 Keyless Type (0.3mm~3.0mm) $ Model: EDC30 $ Keyless Type (0.3mm~3.0mm) Model: EDC30U *For any Taiwanese Drill EDM Keyless Type (0.3mm~6.0mm) JT1 $ Model: EDC60U

8 SDNC16P with Tool Changer Shown SDNC60P $87, SDNC16P $ Machine Only $ w/ auto tool changer $ w/ 4th axis Machine can be programmed for circular arrays, rectangles and has a fourth axis for drilling metal sections such as robs, tubes and other shapes ; Addition of rotary indexer is necessary for this operation Auto Edge fi nder is standard with this machine Can do drill production quickly CAD/CAM generated programs can be downloaded, by Ethernet work, RS232 or Floppy disk De-ionized water should be used With on line help, it s easy to do programming by G/M code Linear scale, enhances long term operation and excellent accuracy EDM parameters stored and recall by: type of electrode, size of electrode & material of work piece Auto Electrode Change (AEC) is possible to adapt on this machine. (optional) Multiple coordinate display, and full screen display of machining monitor and position Auto program restart function, middle start, Program graphic check function, with graphic and machine bounded Auto electrode wear compensation, do not need to program with electrode wear and guess how much electrode wear is. It automatically measures the electrode wear and compensates into the program Manual Data Input (MDI) function, after tested the program may save the program as a regular fi le Protection function while electrode touch work piece machine will stop There are 6 coordinates in this system, as work piece reference position page 14 Standard Accessories: Paper filter 10μm (1pc) Ceramic guide 0.5mm, 1.0mm (1ea) Electrode tubes 0.5mm, 1.0mm (40ea) Electrode holder 0.3~3.0mm (1pc) Work light (1pc) Tool kit and tool box (1set) Back up program (1 CD-ROM) Optional Accessories: Auto filtering system Electrode tubes Guides Keyless chuck 0~1.5mm Keyless chuck 0~3.0mm DRAM memory IC Auto electrode changer 16pcs 4th axis with linear motion 4th axis with rotate function Specifications: Model SDNC30P SDNC16P SDNC60P SDNC80P Price $64, $54, $87, $99, Table size 20 x x9 28 x x35.4 Servo travel (X,Y) 16 x12 12 x8 24 x x31.5 Servo travel Z Back slide travel C null Manual move by motor drive /Program by servo (optional) Distance between 1.57 ~ ~ guide & table Table load 1100lbs 440 Lbs. 660 Lbs. 660 Lbs Max. work piece size 27.6 x23.6 x x16.4 x x24 x12 32 x24 x12 Net weight 3300 Lbs Lbs Lbs Lbs Lay out (WxDxH) 67 x55 x82 48 x44 x92 84 x64 x92 84 x78 x90 Capacity of fl uid 7.96Gal 5.3 Gal 13.2 Gal (26.4 Gal optional) Packing size 86 x17 x86 56 x56 x x72 x x90 x83 Electrical Power input 200,220,380,415,440(575) V,3 Phase, 50/60 Hz Max. power ration 4KVA (6 KVA) Max. EDM current 25+25(optional) Amperes Min. command unit (0.001mm) (0.001mm) (0.005mm) (0.005mm) Resolution (0.001mm) (0.001mm) (0.005mm) (0.005mm) Feed back unit 1μ Linear scale 1μ Linear scale 5μ (with 1μ Linear scale) 5μ (with 1μ Linear scale) Manual speed 4 speed (Slow, Middle, High, Rapid) by parameter setting Program axis 3 axis 3 axis stand/ 4 axis (optional) EDM parameter By selection work piece, electrode material & size of EDM parameter On line help Standard Graphic function Standard Monitor 10.4 inch TFT or 14 Inch color CRT SDNC16P $ Machine Only $ w/ auto tool changer $ w/ 4th axis Automatic Electrode Changer (16 station Changer) for model SDNC16P. Controller Specifications: CPU Pentium Monitor 14 CRT or LCD FDD 3.5 Floppy Disk HDD Suitable size Port RS-232 standard Keyboard Keypad, Ext. keypad socket DRAM Suitable for system running ICON Edit Standard On-Line Help Standard Auto-Restart Standard Edge Finder Standard EDM Parameters 600 Linear Motion Interpolation Rapid Feed Standard Circle Motion Interpolation Sub-program Call Call sub in fi le Print Program Printer port Network (Ethernet) Optional Workpiece Rotate Standard Program Rotate Standard Graphic with Bounded Standard Touch Protection Standard Coordinates G54 to G59

9 CNC CONTROL SYSTEM ( Resolution with Auto Depth Control). 50 Amp. Max. Machining Current. High Pressurize Pump. C-5 Grade Ball Screws. Motorized Backslide. Stainless Steel Work Table. Main Specifications : Drilling Capacity Table Size 20.6 x 12.8 Max. Work Piece Weight 500 lb. Max workpiece size: ( L X W X H ) 32 X 25.5 X 27.5 Table Travel X Quill Servo Travel (Z1) 14.7 Motorized Backslide (Z2) Max distance from guide to tabletop 16 Packing Dimension 2 PCS. Weight (APPROX.) 3,300 lb. SDNC4030 $86, SDNC6040 Shown GROMAX Chiller -OIL Series Oil Cooler for Wire EDM Application: CNC wire cutting machine High speed spindle Laser cutting machine PCB drilling machine Electrode cooling of spot welder Plastic injection molding machine Printing machines Semiconductor manufacturing equipment Medical instrument Feature: Precisely control temperature of industrial machines, improve production efficiency and reduce cost. Uses stainless steel for water circuit. Multi-safe devices are equipped to secure the operator and cooler safety. No need for cooling water tower. Item/Model HWV-250PS HWV-400PS HWV-600PS HWV-750PS HWV-1000PS HWV-2RPS HWV-3RPS HWV-4RPS HWV-5RPS Price $Call $Call $Call $Call $Call $Call $Call $Call $Call Coolingcapacity KCAL/H 50/60 Hz 840/ / / / / / / / /15000 W 50/60Hz 980/ / / / / / / / /17500 BTU/H 50/60Hz 3300/ / / / / / / / /60000 Temp. A Fixed temperature control type (setting range 10~40 o C) controller B Differential temperature control type (tracing room/machine body temperature, setting range -10 ~ +10 o C) Use Ambiet temp.xc 10 ~ 40 o C range Oil temp.xc 10 ~ 30 o C Power source 3X 200 ~ 230V 50/60 Hz Motor W 500/50 820/ / / / / / /750 Compressor/Pum/Fan Heat dissipation Air cooled Pump W Max. Flow Rate 27/31 32/38 58/75 58/75 100/150 L/min Max. Liquid Lift M 3.1/ /5.4 28/40 28/40 28/40 Inlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Outlet pipe diameter PT 1/2" 3/4" 1" 1-1/4" Dimension WDH mm 360x440x x520x x520x x450x x750x x735x1400 page 15

10 GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine Special Precisely fi t for ceramic guide Less Electrode ware, cut faster 16 (400mm) tubing is more economical than 12 (300mm) OD Tolerance:+0, mm (+0, ) TUBING & WIRE Tubing & Guide Ultra Precise Electrode Tubes: 400mm/ length OD Tolerance: +0, mm (+0, ) Available in brass & copper Thick-wall design provides complete counter boring for deep hole drilling Capillary Extrusion- Special manufacturing technology offers excellent straightness & concentricity ID Tolerance: , -0 mm ( , -0) GROMAX Precision Ceramic Guide and Tubing Spare Parts for EDM Drilling Machine D 1.22 Hole pattern for CG010 ~ CG350 D=5.98mm/ CG360 ~ CG600 D=8.98mm/ Long Version Ceramic Guide Overall Length: 50mm, 75mm, 80mm Type A Type B CODE SIZE (mm) INCH Equivalent Ceramic Guide Model: CG Brass Tubiing Model: BR Copper Tubing Model: CP Multi-Channel Brass Tubing Model: MCBR Multi-Channel Copper Tubing Model: MCCP Micro EDM Tubing Thick Wall Tubing $ $180.00* $180.00* $ $140.00* $140.00* $ $120.00* $120.00* $ $100.00* $100.00* $ $100.00* $100.00* $ $100.00* $100.00* $ $100.00* $100.00* $ $95 / $70** $95 / $70** $ $95 / $70** $95 / $70** $ $95 / $70** $95 / $70** $ $95 / $70** $95 / $70** $ $95 / $70** $95 / $70** $ $90 / $65** $90 / $65** $ $90 / $65** $90 / $65** $ $90 / $65** $90 / $65** $ $90 / $65** $90 / $65** $ $90 / $65** $90 / $65** $ $50 / $42** $50 / $42** $ $50 / $42** $50 / $42** $ $50 / $42** $50 / $42** $ $ $ $50 / $42** $50 / $42** $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ page 16 10pcs /pack 20pcs /pack 40pcs /pack 20pcs /pack * 200mm Length **300mm Length 10pcs /pack

11 TUBING & WIRE Tubing & Guide EDM & ACCESSORIES Copper Tungsten Rod CODE SIZE (mm) INCH Equivalent Ceramic Guide Model: CG Brass Tubing Model: BR Copper Tubing Model: CP Multi-Channel Brass Tubing Model: MCBR Multi-Channel CopperTubing Model: MCCP $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Ceramic Guide and Collet for Sodick Machine Spare Parts for EDM Drilling Machine Code unit:mm SRK (K1C GUIDE) SRKC (COLLET) GOMS (GROMMET) SRKS (Spacer) $ $85.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $1.50 $ $ $65.00 $2.00 $ pcs /pack 10pcs /pack 10pcs /pack We have: OD( 1 ~ 30mm ) x LENGTH( 100mm, 175mm & 200mm ) Tungsten copper rod only. * Composition : CU:W = 25 ~ 30 : 70 ~ 75 * Specific gravity : 14.2g/cm3 * Hardness : 91 HRB * Electrical conductivity (IACS) 45% Metric size: 200mm length Diameter Model Price/ EACH Size (mm) 1 CTR100 $ CTR200 $ CTR300 $ CTR400 $ CTR500 $ CTR600 $ CTR700 $ CTR800 $ CTR900 $ CTR1000 $ CTR1100 $ CTR1200 $ CTR1300 $ CTR1400 $ CTR1500 $ CTR1600 $ CTR1700 $ CTR1800 $ CTR1900 $ CTR2000 $ CTR2100 $ CTR2200 $ CTR2300 $ CTR2400 $ CTR2500 $ CTR2600 $ CTR2700 $ CTR2800 $ CTR2900 $ CTR3000 $ Inch size: 8 length Diameter Model Price/ EACH Size (inch) 1/8 CTR1/8 $ /16 CTR3/16 $ /4 CTR1/4 $ /16 CTR5/16 $ /8 CTR3/8 $ /16 CTR7/16 $ /2 CTR1/2 $ page 17

12 Spare Parts for Wire EDM WIRE EDM Parts Wire EDM Spare Parts Diamond Guide Power Feed Flushing Cup Connected Parts GROMAX Wire EDM Parts are made of the highest quality materials to assure consistent and lasting wear Exact tolerances are reached by each dimension finish ground Wire surfaces are polished for smoother movements These parts are for wire EDM from MITSUBISHI, FANUC, BROTHER, CHARMILLES, & JAPAX For Diamond Guide for MITSUBISHI WM101-1 WM102 WM104 WM107 WM109 WM111 WM113 WM117 WM122 WM101-2 WM103 WM106 WM108 WM110 WM112 WM114 WM120 WM124 Model WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM WM108 Size (mm) ø, L=11 Description Wire Guide Wire Guide Position Machine Model Original P/No. Price New SU, DWC-N, F (Manual) DWC-F1, G (Manual) X053C082G51 X053C082G56 X053C082G65 X052B040G64 X052B040G65 X052B040G66 Wire Guide DWC-F, F1, G, H, H (SK2/AF) X053C188G54 X053C188G55 X053C188G56 Wire Guide DWC-HA, H, H, H1, HA, C (Manual) X052B054G51 X052B054G52 X052B054G53 X052B054G54 X052B054G (NVT) Wire Guide DWC-H, H, H1 (SK3/AF) X052B092G54 X052B092G55 X052B092G (NVT) Wire Guide Upper DWC-H, H, G (SK1, SK2, SK3/AF) Wire Guide Upper DWC-H, HA, SA, SB, SZ, AF-1 (SK/AF) -ceramic on coolant hole- X052B102G53 X052B102G54 X052B102G (NVT) X052B240G50 X052B240G51 X052B240G52 (X052B123G53) X052B240G53 (X052B123G54) X052B240G54 (X052B123G56) (NVT) $ $ $ $ $ $ $ Set Screw Upper DWC-N, F, F1, G (Manual/AF) X054D162G54 $ WM ø Die Guide A Upper DWC-G, F, F1, H, H (SK1, X054D171G54 $ SK2, SK3/AF) WM Eccentric Upper DWC-F, F1, G (SK1/AF) X053C136G52 $ WM Die X053C136G54 WM111 Die Holder DWC-G, H, H, H1, C, SA, SB, X053C245H (NVT) $66.00 SZ (SK3/AF, AF1; Maunal) WM112 Center Die Upper DWC-G, H, H (SK1, SK2, X053C229G51 $ SK3/AF) WM ø, Set Screw DWC-H1, HA, SA, SB, SZ X053C628G51 $ L=2.5 (AF1) WM Set Screw DWC-H, H, H1, HA, SA, SB, X053C241G (NVT) $ SZ, C (Manual) -ceramic- WM WM Wire Guide DWC-H1, HA, C, CR, SA, SB, SZ, (AF1) -ceramic on coolant X052B241G51 X052B241G52 $ WM hole- X052B241G53 (X052B176G53) X052B241G54 (X052B176G54) WM X052B241G55 (X052B176G55) WM (NVT) WM Set Screw Upper DWC-H1, HA, SB, SZ (AF1) -inner side ceramic- X053C524G (NVT) $ WM WM WM WM WM WM Wire Guide DWC-70, 90, 110, 200 (Old machine, Manual/AF) X053C012G54 X053C012G56 X053C012G57 $ Wire Guide New SU, DWC-F (SK1/AF) X053C104G54 X053C104G55 X053C104G56 $ X053C153G55 $ SK3/AF) Die Guide B Upper DWC-H1, HA, SA, SB, SZ X053C508G51 $ (AF1) X053C508G WM Sub Guide Upper DWC-F, F1, G, H (SK1, SK2, WM WM WM129C-05 WM129C-10 WM129C Jet Upper DWC-HA, SA, SB, SZ, SX, CX, FX, QA, RA,FA, P (AF2, AF3, AT) -ceramic- X054D826H06 X054D826H08 X058D054H (NVT) $ WM129A 0.75mm Jet w/stainless housing and ceramic insert X054D826H07 $ WM125 WM126 page 18

13 WM129C WM131 WM133 WM130C WM132 WM134 Wire EDM Spare Parts WIRE EDM Parts WM WM WM WM WM WM WM WM WM WM WM Wire Guide Upper DWC-RA, FA (AT) X056C833G51 X056C833G52 X053C833G (NVT) Wire Guide DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X056C426G51 X052B243G62 X052B243G63 X052B243G64 X052B243G (NVT) Wire Guide DWC-RA, FA (AT) X052B387G51 X052B387G52 X052B387G (NVT) WM134 Ring DWC-HA, SA, SB, SZ, CX, FX, SX, QA (AF2, AF3) EDM & ACCESSORIES $ $ $ X204D293H02 $30.00 Power Feed for MITSUBISHI WM001 WM003 WM005 WMT005 WM009 WM002 WM004 WM005 WM008 Model Size (mm) Description Position Machine Model Original P/No. Price WM001 7x22x0.7 Power Feed DWC-G, H, N,C, CR, CS, X054D125H03 $14.00 F, F1, G, H, H, H1, HA, SB, SZ (Manual) WM001S 7x22x0.7 Power Feed Upgraded WM001 X054D125H03 $20.00 WM x22, ID:1.0 Power Feed Upper DWC-HA, SB, SZ (AF1) X054D476H (NVT) $22.00 WM002 7x22 Power Feed WM002S 7x22 Power Feed WM x16 Power Feed WM x16 Power Feed WM x3x27.5 Power Feed WM005G 2.5x3x27.5 Power Feed WM005L 2.5x3x27.5 Power Feed WM006 16x9x7 Power Feed WM007 16x17x7 Power Feed WM008 10x6x8 Power Feed WM x20 Power Feed WM009G 24.5x20 Power Feed WM010 Model Size Description Position Machine Model Original P/No. Price (mm) WM130C Jet Upper DWC-H1, HA, SA, SB, SZ (AF1) S684D898P14 $ WM130C-10 WM130C ceramic- S684D823P14 S684D898P61 WM131 Die Holder Upper DWC-H1, HA, SA, SB, SZ (AF1) X177B558H02 $65.00 WM WM WM WM WM Wire Guide Upper DWC-HA, SA, SB, SX, SZ, CX, FX, QA, RA, FA (AF2, AF3) X053C834G51 X053C834G52 X053C834G53 X053C834G54 X053C834G (NVT) $ DWC-F, G, H, HA, SA, SB, SZ (SK/AF, AF1) -auto connection- X054D129H (NVT) $14.00 Upgraded WM002 X054D129H (NVT) $20.00 Upper DWC-F, F1, G, H (SK/AF) X054D199H01 $20.00 Upper-A for auto connection Upper DWC-F, F1, G, H (SK/AF) X054D216H01 $20.00 Upper-B for auto connection Upper DWC-G, H, H, H1, HA, SA, X054D345H01 $23.00 SB, SZ (SK/AF, AF1) auto (NVT) connection (standard) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (tin coated: for good current flow rate) Upper DWC-G, H, H, H1, HA, SA, SB, SZ (SK/AF, AF1) auto connection (long straight) DWC70, 75, 80, 90, 100, 110, 200 N (Manual) Upper DWC70, 75, 80, 90, 100, 110, 200 N (Manual) DWC-H1, HA (Manual, for thin wire) DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -tin coated: for good curent fl ow rate- X054D345H (NVT) X054D345H (NVT) $29.00 $23.00 X054D024H01 $8.00 X054D020H01 $AUR X054D186H02 $55.00 X056C075H04 $90.00 X056C075H04 $ X088D493H02 X054D990H01 $92.00 page 19

14 WIRE EDM Parts Wire EDM Spare Parts Flushing Cup for MITSUBISHI WM200 WM201-2 WM202B WM207 WM209 WM2101 WM211 WM203 WM201-1 WM202A WM205SET WM208 WM210 WM2102 WM212 WM215 Model Size (mm) Description Position Machine Model Original P/No. Price WM ø Water DWC-H. H. H1. HA. C X183C443H01 $19.00 (Manual/AF) WM202A-4 WM202A-8 4.5ø 8ø Water Upper DWC-G. H. H. C. H1. HA -with groove- X183C439H01 X183C439H (NVT) $15.00 WM202B 4ø Water Upper DWC-G. H. H. C. H1. HA (Manual/AF) WM203-4 WM203-6 WM203-8 =WM202B 6ø =WM204 Water Upper DWC-G. H. H. C. CA. H1. HA (Manual/AF) WM204 8ø Water Upper DWC-H. H. C. H1. HA (Manual/AF) -plastic for G, H Series- WM205SET L=10, 20, 30, 50 Water Upper (Set) DWC-G. H. H. C. H1. HA -long nozzle- WM207 4ø Water DWC-F1. G. H. H1. HA. C (Manual) -ditch acrylic- WM ø Water DWC-F1. G. H. H1. HA. C (Manual) -ditch brass- WM WM WM208-4 WM208-6 WM ø 6ø 4ø 6ø 8ø Water DWC-F1. G. H. H1. HA. C (Manual) -ceramic- Water DWC-F1. G. H. H (Manual/ SK1, SK2, SK3/AF) WM209 8ø Water DWC-F1. G. H. H. H1. HA.C (Manual/AF) WM210-4 WM210-8 WM WM WM WM WM211-4 WM211-6 WM211-8 WM212-4 WM212-8 WM WM WM WM WM215-4 WM215-8 WM WM216 WM217-4 WM217-6 WM ø 8ø 4ø 8ø 4ø 8ø 4ø, L=8 8ø, L=8 4ø 8ø 4ø 8ø 4ø 8ø 4ø 8ø OD: 65ø ID: 15.5ø 4ø 6ø 8ø Water DWC-H1. HA. SA. SB. SZ (AF1) -cut ceramic- Water Upper DWC-H1. HA. SA. SB. SZ (AF1) Water DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -acrylic- Water DWC-HA. SA. SB. SZ. CX. SX. FX. QA. RA. FA (AF2, AF3, AT) -brass- Water DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) -ceramic- Water Upper DWC-HA. SA. SB. SZ. SX. CX. FX30. FX-K, QA, RA, FA (AF2, AF3, AT) Holder Upper DWC-HA. SA. SB. SZ. SX. CX (AF2, AF3, AT) X183C439H01 $ (NVT) X183C439H01 $15.00 X183C439H02 X183C439H03 X183C439H03 $15.00 $65.00 X053C491H01 $10.00 X053C491H01 $15.00 X054D209H11 $80.00 X054D209H12 X054D209H11 $15.00 X054D209H12 X054D209H13 X053C491H03 $15.00 Water DWC-H1. HA. SA. SB. SZ (AF1) -cut acrylic- Water DWC-H1. HA. SA. SB. SZ (AF1) -cut brass (NVT) (NVT) $15.00 $20.00 X053C621H01 $80.00 X053C621H (NVT) X183C378H01 $19.00 X183C378H02 X183C378H (NVT) (NVT) $ (NVT) $25.00 X054D881H03 $80.00 X054D881H (NVT) X186C793H01 $19.00 X186C793H (NVT) X186C793H03 X182B458H02 $60.00 Water Upper FX10. FX20 (AF3) X196C45AH01 X196C45AH02 X196C45AH03 $20.00 WM216 WM217 WM204 WM2103 page 20

15 Connected Parts for MITSUBISHI For WM301 WM303 WM305 WM307 WM401C WM403C WM405C WM407C WM409C WM302 WM304 WM306 WM400 WM402C WM404C WM406C WM408C WM410C Wire EDM Spare Parts WIRE EDM Parts Model Size (mm) WM301 Isolator Plate Upper DWC-F1. G. H. H. H1. HA. C (Manual) -taper cut- Description Position Machine Model Original P/No. Price X053C162H (NVT) $ WM302 Isolator Plate Upper DWC-F1. G. H. H (Manual) X054D185G51 $ WM303 Isolator Plate DWC-F1. G. H. H (SK1/AF) X053C228G52 $ WM304 Isolator Plate DWC-SA. SB. SZ (AF1/AF2) X053B166G51 $ WM305 Isolator Plate DWC-110H1, 200H1, 110HA, 200HA (Manual/AF) WM306 Isolator Plate DWC-90H1, 90HA. 90C (Manual/AF) X053C443H (NVT) X053C314H (NVT) $ $ WM307 Isolator Plate CX. SX (AF2, AF3) X056C110G51 $ WM308 Isolator Plate FX10 (Manual/AF), FX1 X056C273G51 $ WM309 Isolator Plate FX20. FX30 (Manual/AF) X056C356G51 $ WM310 Isolator Plate FA10 (AT) X056C968G51 $ WM400 Aspirator DWC-H1. HA. C. SA. SB. SZ X198D838H01 $25.00 (AF1, AF2/Manual) -brass- WM400-1 Rectifi er Ring DWC-H. H1. HA. SZ. C. SB. SA. SX. CX. FX. QA. RA. FA (AF1, AF2, SK3, AT, Manual) X194D998H02 $19.00 WM401C 18x57 Pinch Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM402C 18x57 Capstan Roller Feed Section DWC-F. F1. G. H. H (SK1, SK2) CX: beginning period (AF3) -ceramic- WM403C 25x57 Pinch Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) (Ceramic) WM404C 25x57 Capstan Roller Feed Section DWC-H. H1. HA. SZ. C. SB. SA (SK3/AF1, AF2) -ceramic- WM405C 32x57 Pinch Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- WM406C 32x57 Capstan Roller Feed Section DWC-H1. C. HA. SA. SB. SZ. SX (Manual/AF) Gear Type -ceramic- EDM & ACCESSORIES X054D257G51 X058D078G51 X054D256G51 X058D077G51 $ $ X054D413G51 $ X054D412G51 $ X053C779G51 $ X053C778G51 $ WM407C 18x57 Pinch Roller Feed Section FX (Manual/AF) -ceramic- X058D340G51 $ WM408C 18x57 Capstan Feed Section FX. QA (Manual/AF) X058D339G51 $ Roller -ceramic- WM409C 25x57 Pinch Roller Feed Section FA (AT) -ceramic- X055C008G51 $ WM410C 25x57 Capstan Feed Section FA (AT) -ceramic- X055C009G51 $ Roller WM420 Gear Feed Section DWC-C, H1, HA, SA, SB, X058D501H01 $36.00 SZ, SX, FX, RA, FA (AF1, AF2, AF3, AT) -for WM405C & WM406C- WM420-1 Gear Feed Section for WM407C & WM408C X054D744H02 $37.00 WM421C Roller FX. QA. RA. FA (AF3, AT) -ceramic- X203C607H03 $ WM420 WM421C WM445 WM452 WM423 WM425 WM451 WM452-1 WM423 Aspirator DWC-HA. SA. SB. SZ. SX. CX. FX. QA. RA. FA (AF2, AF3, AT) WM425 Urethane Roller WM445 60ø Water Cover Upper DWC-H. H. C. H1. HA. SA. SB. SZ (for WM202, WM211) WM451 Cap Screw DWC-N. F. F1. G. H. H. H1. C. HA (Manual) -for power supply block- WM452 Die Block Upper DWC-F1. G. H. H. H1. C. HA (Manual) -including WM451 and connector- WM452-1 Die Block Upper DWC-F1. G. H. H. H1. C. HA, CR, CA (Manual) WMS x 10 x16(thick) Urethane Roller for Tension Brake page 21 X053C920G51A (X053C829G54) $70.00 Upper RA, FA (AT) X058D912G51 $95.00 X199D297H02 $20.00 X179D323H02 $9.00 X176C706H02 $ X176C706H02 $ DWC - F, G, H, HA series X053C175G51 $148.00

16 WIRE EDM Parts Wire EDM Spare Parts Connected Parts for MITSUBISHI For WM453 WM453-2 WM454 WM456 WM458 WM460 WM501 WM453-1 WM453-3 WM455 WM457 WM459 WM470 Model Size Description Position Machine Model Original P/No. Price (mm) WM453 Die Block $ WM453-1 Die Block DWC-F1. G. H. H (Manual/ X176C610H01 $ AF) WM453-2 Stopper DWC-G.H (Manual/AF) X184D271H06 $73.00 WM453-3 Die Block DWC-G. H (Manual/AF) -for $73.00 arm parts- WM454 Die Block DWC-H1. HA (Manual/AF) X177B046H03 $ WM455 Pulley B DWC-F. F1. G. H. H (Manual) -including shaft, brass cover, bearing and screw- X602B845G51 $88.00 WM456 Roller DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -with retaining ring- WM457 7ø Bearing DWC-H1. HA. SA. SB. SZ. SX. C.X (Manual/AF) -for WM456 R WM458 8ø Bearing DWC-F. F1. G. H. H. H1. HA. C. SA. SB. SZ. SX. CX. QA. FA. RA (Manual/AF) -for WM401C, WM403C, WM405C, WM407C R X183C442H01 $ (NVT)+ S922N040P07 S859N319P33 $15.00 S859N319P31 $11.00 WM459 Die Block DWC-90C (Manual) X177B713H02 $1, WM459-1 Plastic Cover DWC-H1. HA (AF1) X198D777H01 $43.00 WM459-2 Fixing Plate DWC-H1. HA (Manual/AF) $29.00 WM459-3 Cover DWC-H1. HA (Manual/AF) X198D776H01 $43.00 WM459-4 Wave Washer DWC-H1. HA. SA. SB. SZ. S913N313P11 $5.00 SX. CX (Manual/AF) -for WM456- WM459-5 Spacer DWC-H1. HA. SA. SB. SZ. SX. CX (Manual/AF) -for WM456- X194D873H01 $6.00 WM459-6 Retaining Ring DWC-H1, HA, SA, SB, SZ, SX, CX (Manual/AF) -for WM456- WM460 Clamping (Manual/AF) -for WM stainless- WM470 WM470-1 Power Feed Holder Power Feed Holder Upper DWC-HA. SA. SB. SZ. CX. FX. RA. FA (AF2, AF3, AT) -for WM009- DWC-HA, SZ, SB, SA, SX, CX (AF2, AF3) S922N040P07 $5.00 X189D690H04 $38.00 X209D212H01 $54.00 X208D405H01 $54.00 WM501 Cutter Unit Cutter CX: end period. FX (AF3) X056C326G51 $ WM501-1 Fixed Plate Cutter CX: end period. FX (AF3) X058D376H01 $96.00 WM501-2 Aspirator Cutter CX: end period. FX (AF3) X203C145H04 $ WM501-3 Detecting Cutter CX: end period. FX (AF3) X258D350H01 $15.00 WM502 Cutter Unit Cutter CX: beginning period. (AF3) X058D186G51 $ WM502F Fixed Blade Cutter CX (M/C) (=M502-1) $ WM502.MB Main Blade Main Blade for WM502 $ WM608V Bearing FX, QA, RA, FA (AF3/AT) -for P840F000P67 $15.00 =WF501 WM421C- P840F000P69 (=M422) WMCT421 Insulator Tip for limit switch -ceramic- Switch Patent No. P421A030P000 $32.00 WM502 WM501-1 WM501-2 WM501-3 WM502F WM608V page 22

17 Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Diamond Guide for SODICK Model Size (mm) Description Position Machine Model Original P/No. Price WS WS WS Wire Guide AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) - diamond $2, WS100 WS101 WS WS WS Wire Guide AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) (dia: 0.22, 0.27, 0.32mm also available) -sapphire-(made in Japan) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) $ WS102 WS103 WS WS WS Wire Guide 150W. AP150. AW Series. EPOC BF250. BF275 (Manual) (dia:0.22, 0.27, 0.32mm also available) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) $ WS WS WS Wire Guide AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (Manual: U&L/ AF: L)(dia: 0.22, 0.27, 0.32mm also available) (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) $ WS103L WS104 WS103L-08 WS103L-10 WS103L Wire Guide A280L. 320L. AW. EPOC Series (dia: 0.32mm also available) -3mmø 87-3L long type (0.21) (0.26) (0.31) (0.32) $ WS105 WS WS WS Wire Guide AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AWT Die A)AWT Die A (dia: 0.22, 0.27, 0.32, 0.35, 0.4, 0.6mm also available) -sapphire (0.21) (0.22) (0.26) (0.27) (0.31) (0.32) (0.35) (0.4) (0.6) $ WS WS WS Wire Guide AP150 (Manual) -long type) $ WS106 (0.8mm) 0.21 Sapphire Guide Guide C (Sapphire) ID=0.8mm $86.00 Power Feed for SODICK WS001 WS003S WS005LS WS002 WS004S Model Size (mm) Description Position Machine Model Original P/No. Price WS001 18x10 Power Feed Upper 1W. 150W. 330W. 453W. 654W. AP150. BF250. BF275. EPOC300. AW Series. (Manual) $35.00 WS002 18x14 Power Feed WS003S 16x10 Power Feed WS004S 14x11x12 Power Feed WS005LS 12.5x14x11.7 Power Feed WS005LT 12.5x14x11.7 Power Feed page W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC301. AW Series. (Manual) Upper 150W. 330W. 453W. 654W. 1WH. AP150. BF250. BF275. G3A. EPOC (Manual) -silver tungsten- Upper 150W. AP150. BF250. BF275. EPOC303. AW Series. E3 WS. BF250. E (Manual) -silver tungsten- Upper, Left Upper, Left AW BF250. BF275. EPOC E3WS (Manual) -silver tungsten- AW BF250. BF275. EPOC E3WS (Manual) -tungsten carbide (NVT) (NVT) $95.00 $ $ (NVT) (NVT) $ $108.00

18 WIRE EDM Parts Wire EDM Spare Parts WS005RS WS007S WS009S WS006S WS008S WS010 Model Size (mm) Description Position Machine Model Original P/No. Price WS005RS 12.5x14x11.7 Power Feed Upper, Right AW BF250. BF275. EPOC E3WS (Manual) -silver tungsten (NVT) $ WS005RT 12.5x14x11.7 Power Feed WS006S 12.5x19x11.6 Power Feed WS007S 10x10x20 Power Feed WS008S 12x20.6 Power Feed WS009S 10x8x30 Power Feed WS x40x20 Power Feed Upper, Right AW BF250. BF275. EPOC E3WS (Manual) -tungsten carbide- AW BF250. BF275. EPOC Series. E3WS -silver tungsten (NVT) (NVT) 150W -silver tungsten $ $ $ $ (NVT) (new#), (old#), (old#) $ $61.00 Flush Cup for SODICK WS201 WS203 WS206 WS208 WS209L WS209W2 WS202 SET WS205 WS207 WS209 WS209W WS209WS Model Size (mm) 150W. AP150 -silver tungsten- A. AW. EPOC Series. BF250. BF275. AP300~AP550. -silver tungsten- AQ. AW. A. AP200~AP550. PGW200. EXC100. BF. JL Series. EPOC Series (Manual/AF) Description WS201 5ø NE WS202 5ø Rectifi er WS202SET Water Guide WS203 6ø Water WS204 5ø Water WS205 10ø Water WS206 5ø Water WS207-3 WS207-4 WS207-6 WS WS WS208-3 WS208-6 WS209-3 WS209-4 WS209-6 WS WS ø 4ø 6ø 10ø 12ø 3ø 6ø 3ø 4ø 6ø 10ø 12ø C G3 G4 H2 T2 Water E3 E4 A H1 T1 Position Machine Model Original P/No. Price Upper 330W. 453W. 654W. EPOC3W (Manual) -for 84 type SUS assy- E3WS, BF250, BF275, EPOC302, EPOC300, AW330,453 (Manual) -water guide 3WS assy- BF250. BF275. EPOC Series. E3WS. AW (Manual) -3WS assy- AP150. PGW150 (Manual) -water guide P- 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW EPOC (Manual) 150W. 330W. 453W. AP150. AW150. AW EPOC (Manual) 150W. 330W. 453W. 654W. G3A. AP150. AW150. AW EPOC (Manual) -with nose- AQ. A. EPCO Series. AP200~AP550. PGW200. EXC110. BF. JL Series AW (AWT) A AW BF Series A. AQ. EPOC Series. AP200~AP550. AW PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L) $ $ ( ) (NVT) $42.00 $ $ $ $ (3mm) (4mm) (6mm) (10mm) (12mm) $ $ (3mm) (4mm) (6mm) (10mm) (12mm) $11.00 WS209L L=4 A Series, PGW, AP -long head- $14.00 WS209W 6ø AQ. A Series. AP300~AP $12.00 S87-3 (AWT) -float nozzle S87-3 WS209W2 6ø AQ330W -float nozzle- $18.00 WS209WS Spring Ring AQ, A Series, AP300~550 (AWT) -for float nozzle $10.00 WS210 3ø Water A280L, 500L, AW320, AW350, L Series (AWT) $16.00 WS210 page 24

19 For Connected Parts for SODICK WS399 WS400C WS405 WS408 WS411 WS413 WS415 WS417 WS5047 WS5051 WS5055 WF101 WF103 WF102 WF105 WS400 WS401 WS407 WS409 WS412 WS414 WS416 WS417A WS5034 WS5048 WS5053 Wire EDM Spare Parts WIRE EDM Parts WS407 WS408 Holder Holder WS409 Holder WS411 Urethane Roller WS412 10ø Urethane Roller WS413 7ø + M5 Urethane Roller Upper AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series (Manual: U&L/AF: L for WS209) AQ. A. EPOC Series. AP200~AP550. PGW200. EXC100. BF. JL Series Upper (AWT for WS207) $ $ $ Upper A, AP, BF, EPOC Series $ Upper A350D. A320. BF. AP. EPOC (M/C Type) $ Upper BF275, Old (M/C Type) $ WS414 70x20 Roller B Feed A500W, BF $ Section WS415 70x20 Roller C Feed A500W, BF $ Section WS416 Tension Upper A530D, AQ325, AQ325L $ Urethane Roller WS x19x22 Urethane AQ325L, 535L, AQ SERIES AP , $ Roller WS417A 100x10x22 Urethane A320, AQ530, (AQ325-OLD TYPE) $ Roller WS500 AWT Cutter Upper (for AWT) (=S035W) $ , WS x12 Roller B Feed A Series $ Section WS5048 Roller B BF275 $ WS5051 Roller C A Series -ceramic $ WS5053 Roller C A $97.00 WS5013 Die Block Only $ WS5013SET.U Die Block Upper $ WS5013SET.L Die Block $ WS5031 Pully V Ceramic w/ $ Shaft WS5032 Pully V Ceramic Only $ WS x58x25 AQ325m Ceramic Pulley Base,72x58x25mm (t) $ Diamond Guide for FANUC Model WF WF WF WF WF WF WF WF WF WF Size (mm) Model Size (mm) Description Position Machine Model Original P/No. Price WS399 Pulley B A Series - ceramic $ WS Pulley E EPOC, BF, A Series (Manual, for AF $82.00 Belt/SUS) WS400C 25 Pulley E EPOC, BF, A Series (Manual, for AF $ Belt/Ceramic) -w/ 2mm groove- WS401 Bearing -for Pully 626LLB- 626RS (LLB) $9.00 WS405 Wire Roller Upper AP $55.00 Description Position Wire Guide Upper O. P. Q. R. T. Mate. W Series (Manual) Machine Model Original P/No. Price Wire Guide O. P. Q. R. T. Mate. W Series (Manual) EDM & ACCESSORIES A X765 A X766 A X (NVT) A X775 A X776 A X (NVT) Wire Guide Upper O. P. Q. R. T. W Series (AWF) A X774 A X775 A X776 A X (NVT) $ $ $ WF Wire Guide A X734 $ WF WF WF Wire Guide K. M. N. L Series (AWF) A X443 A X444 A X445 $ WF106 page 25

20 For Model Size (mm) WF107 WF110 WF112 WF113L WF125-1 WF108 WF111 WF113 WF124 WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF WF113L-08 WF113L-10 WF113L-12 Description Wire Guide Position Machine Model Original P/No. Price K. M. N. L Series (Manual, 300A power supply) A X833 A X834 A X835 Wire Guide Upper K. M. N. L Series (AWF) 60C A X463 A X464 A X (NVT) Wire Guide K. M. N. L Series (Manual, 60C power supply) A X753 A X754 A X (NVT) Wire Guide Upper a -0A, 0B, 0C, ia, ib Series (Manual) A X733 A X734 A X (NVT) Wire Guide a -0A, 0B, 0C, ia, ib Series (Manual) A X743 A X744 A X (NVT) Wire Guide Upper a -1A, 1B, 1C, ia, ib (AWF) A X705 A X706 A X (NVT) Wire Guide a -1A, 1B, 1C, ia, ib Series (AWF) A X715 A X716 A X (NVT) $ $ $ $ $ $ $ Wire Guide For big angle a -1B (Length: 19mm) $ WF Die Guide Upper A X645 $ WF ø 30x12 Jet a -A, B, C, ia, ib Series (AWF) A Y774 $ WF Jet Upper a -A, B, C, ia, ib Series (AWF) A Y756 $ WF mm Sub Die Guide Upper DWC-A,B,C,iA,iB (AWF) A X620 $ WF mm A X620 WF-Y726 WIRE EDM Parts Wire EDM Spare Parts Sub Die Guide Upper A Y726 or A Y726 $ Power Feed for FANUC WF001 WF003 WF005 WF007 WF201 WF204 WF206 WF002 WF004 WF006 WF202 WF205 WF206S Model Size (mm) Description Position Machine Model Original P/No. Price WF001 25x9x10 Power Feed H. L. E. M. K A97L $44.00 /25S1P WF002 16X6X6.3 Power Feed WF003 8x4x10 Power Feed WF004 16x6.3x6 Power Feed WF x7.7x23 Power Feed WF006 4x12x23 Power Feed WF006L 4x12x30 Power Feed WF007 15x6x6 Power Feed WF201-3 WF201-4 WF201-5 WF202-3 WF202-4 WF ø 4ø 5.5ø 3ø 4ø 5.5ø Water page 26 O. P. Q. R. T. Mate. W A97L /15S1P $11.00 K. N. M A X107 $13.00 AF, W-1, 2, 3, 4 (AWF) a-0a, 0B, 1A, 1B (Manual/ AWF) (polished) a-0c, 1C, ia, ib (Manual/ AWF, standard type) a-0c, 1C, ia, ib (Manual/ AWF, long type) A Z882 $ (NVT) A X750 $ (NVT) A X750 $36.00 A X750 $40.00 Upper W-0 A X759 $40.00 O. P. Q. R. W. T Series (Manual) Water O. P. Q. R. W. T. Mate Series (Manual) A Y745 $11.00 A Y705 (Y755) $11.00 WF ø Water AF, W-1, 2, 3, 4 (AWF) A X879 $10.00 WF ø Water Upper AF, W-1, 2, 3, 4 (AWF) A Y611 $10.00 (Y745) (NVT) WF206 Cap O. P. Q. R. T. Mate W Series (for WF201/WF202, Brass) A V722 $60.00 WF206S Cap O. P. Q. R. T. W Series (for WF201/WF202, Stainless) A V722 $75.00

21 Flushing Cup for FANUC WF207 WF209 WF211 WF213 WF215 WF217 WF208 WF210 WF212 WF214 WF218 Model Size (mm) Wire EDM Spare Parts WIRE EDM Parts Description WF207 24x17x7 Water WF208 26x17x7 Water WF209-6 WF Connected Parts for FANUC WF301 WF303 WF305 WF305-2 WF307 WF307-2 WF401 WF401S SET WF403 WF408 WF409 WF216 WF302 WF304 WF305-1 WF306 WF307-1 WF400 WF401-1 WF402 WF404 WF409W 6.5ø 11ø Water WF210 16ø Holder WF ø Water WF ø Water WF ø Water WF214 4ø Water WF215 4ø Water WF216 12ø Water WF217 12ø Water WF ø Water Position Machine Model Original P/No. Price W-0 (Manual) A X (NVT) W-0 (Manaul) A X (NVT) Upper Upper Upper Upper a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-0a, 0B, 0C, ia, ib Series (Manual) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) a-1a, 1B, 1C, ia, ib Series (AWF) A X776 (A X776 for C) A X776 A X (NVT) A X (NVT) A X (NVT) A X (NVT) $10.00 $10.00 $14.00 $11.00 $13.00 $11.00 A X771 $11.00 A X752 (775) $14.00 A X774 $14.00 A X752 $13.00 A X772 $13.00 Upper a-0c, 1C Series (Manual)wf A X776 $12.00 WF275 base Upper D=58mmx19mmL-5 screw holes A Y723 $72.00 Model Size (mm) Description Position Machine Model Original P/No. Price WF x62.5x10 Isolator Plate L, H (Manual) -ceramic- A X722 $ WF302 75x63x10 Isolator Plate O, P, Q, R, T, Mate A X709 $75.00 WF303 73x39x12 Isolator Plate AF, W Series (AWT) -ceramic- A X334 $70.00 WF304 51x33x29 Isolator Plate Upper O, P, Q, T, Mate, W A X602 $72.00 WF305 40x40x34 Isolator Plate Upper a-a, B Series A X509 $ WF x27x35 Isolator Plate Upper a-ib (AWF) A X600 $ WF x27x48 Isolator Plate Upper a-b (AWF) $ WF306 72øx15 Isolator Plate a-a.b.c Series A X312 $ WF307 75x56x66 Isolator Plate a-a, B Series A X761 $ WF x66x56 Isolator Plate a-c Series (F318) $ WF x66x56 Isolator Plate a-c Series (F317) $ WF400 12x6x4 Bearing SS1260(Z) for WF401 & WF402 $9.00 WF401 49x6.5x6 Wire Roller E, K, O, P, Q, T Mate, W A X713 $35.00 (plastic+brass) WF401S 49x6.5x6 Wire Roller E, K, O, P, Q, T Mate, W A X713-S $68.00 (plastic+stainless) WF401-1 L=26 Shaft E, K, O, P, Q, T Mate, W (for A X254 $15.00 WF401/WF401S) WF402 64x6.5x6 Wire Roller L, H, M, W (plastic+brass) A X707 $40.00 WF402S 64x6.5x6 Wire Roller L, H, M, W (plastic+stainless) A X707-S $68.00 WF403 40x40x25 Guide Base a-a.b Series (stainless) A X762 $ WF x49x20 Guide Block A a-a Series (Manual/AWF) -stainless- A X770 $ WF x22x12 Roller a -A, B, C, ia, ib Series (Manual/ AWF) -ceramic- WF406 40x20x18 Pinch Roller a-a.b Series (Manual/AWF) -ceramic- WF407 40x20x19 Feed Roller a-a.b Series (Manual/AWF) -ceramic- WF408 57x20x20 Feed Wire Guide Feed Section a -A, B, C Series (Manual/AWF) -plastic- EDM & ACCESSORIES A X765 $ (A97L ) A Z382 $ A97L A Z383 $ A X393 $ WF øx22 Brake Shoe Upper a-a.b.c.ia.ib Series (Manual/ A X371 $ AWF) WF409W Brake Shoe Upper O, P, Q, T, W A V352 $ WF-Y x 8mm Sapphire Roller A Y701 $ page 27

22 WIRE EDM Parts Wire EDM Spare Parts Connected Parts for FANUC WF411 WF413 WF502 WF503 WF721 WF410 WF412 WF414 WF502 WF503 Model Size (mm) Description Position Machine Model Original P/No. Price WF409W0 Brake Shoe Upper W0 Series (AWF) A V352 $ WF410 40x12x30 Pinch Roller Feed a-c (Manaul/AWF) -ceramic- A X382 $ Section WF411 40x12x30 Feed Roller Feed a-c (Manual/AWF) -ceramic- A X383 $ Section WF412 46x40x24.5 Guide Base a-c.ia.ib Series (Manual/AWF) -stainless- A Y762 $ WF413 80øx22 Pinch Roller Feed Section WF414 80øx22 Feed Roller Feed Section WF501 =WM608V a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) a-0ia, 1iA, 0iB, 1iB (Manual/ AWF) 22x8x7mm Bearing a-a.b.c.ia.ib Series (Manual/ AWF) -for WF404-1 WF502 Bearing a-a.b.c Series (Manual/AWF) -for WF406, WF410- A X382 $ A X383 $ A97L / DRF2280H A97L / 6001LLU $15.00 $10.00 WF503 Bearing a-a.b Series (Manual/AWF) A97L / 6203LLU $26.00 WF514 = WF721 Guide Block Upper A X721 $ WF516 Die Guide Base A Y722 $ A X751 Electrod Pin A X751 $15.00 Cap Screw WFVP V-Packing A97L $88.00 WF721 Guide Block Upper A X721 $ For Wire Guide for BROTHER WB101 WB103 WB102 WB104 Model Size (mm) Description Position Machine Model Original P/No. Price WB WB WB Wire Guide HS-300, 350, $ WB WB WB WB WB WB WB WB WB Wire Guide Upper HS-3100, 3600, HS-50A (AWT) Wire Guide HS-3100, 3600, HS-50A (AWT) Wire Guide HS-3100, 3600, HS-50A (STD, Manual) ( ) ( ) ( ) $ $ $ Power Feed for BROTHER WB001 WB002 Model Size (mm) Description Position Machine Model Original P/No. Price WB001 14x14x9 Power Feed HS-300, $55.00 WB002 4x10x19 Power Feed HS-3100, 3600, $40.00 Flushing Cup for BROTHER Model Size (mm) Description Position Machine Model Original P/No. Price WB201 4ø Water HS-300, 350 (-100) $5.00 WB202 4ø Water Upper LS, HS-3100, 3600, HS-50A (AWT/ Manual, 1506) $28.00 WF201 WB202 WB203 WB203 4ø Water Upper LS, HS-3100, 3600, HS-50A $14.00 (AWT/1506) WB205 4ø Water $28.00 page 28

23 Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES Connected Parts for BROTHER For WF301 WF402 WF401C Model Size (mm) Description Position Machine Model Original P/No. Price WB301 57x46x9 Isolator Plate HS ceramic $ WB401C Guide Pulley HS-300 (Wire Guide Roller 300) -ceramic $72.00 WB402 Bearing HS-300 (SSLF 1260ZZ) -for WB (NVT) $15.00 WB302 Arm Insulation HS-50A $ Wire Guide for HITACHI Model Size (mm) Description Position Machine Model Original P/No. Price WH WH WH Wire Guide Upper Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1846 Q1846(C206) Q1846 $ WH101 WH102 WH WH WH Wire Guide Hi-Cut 203, 304, 345, 460, Q Series (Manual) Q1848 Q1848(C207) Q1848 $ WH103 WH WH WH Wire Guide H-Cut Series (Manual) $ Power Feed for HITACHI WH002 WH001 WH005 Model Size (mm) Description Position Machine Model Original P/No. Price WH øx32 Power Feed 203, 304, 345, 460, 580, 610 S1325(C202) $ WH002 11øx32 Power Feed H-CUT 203M, 304P, 406P, 508R, Q Series (AWT) (Q1825)Q6172 (C297) $90.00 WH005 9x18x18 Power Feed WH005G 9x18x18 Power Feed H-CUT 254Y, 355Y, 203R, 203F -standard type- H-CUT 254RS, 355RS (Tin Coating) -gold type (C850) $ (C016) $88.00 Power Feed for HITACHI WH201 WH203 WH202 WH204 Model Size (mm) Description Position Machine Model Original P/No. Price WH201 Water HI-CUT 203, 304, 345, 460 $8.00 WH202 Water HI-CUT 203, 304, 345, 460 $8.00 WH203-4 WH ø 6ø Water HI-CUT 203M, Q Series -high speed- C261 C260 $20.00 WH204 Support HI-CUT 203M, Q Series (AWT) Q6205(C372) $73.00 (C327) WH205 Support Upper HI-CUT 203M, Q Series (AWT) Q6201(C494) $73.00 WH205 For Wire Guide for CHARMILLES Model Size (mm) Description Position Machine Model Original P/No. Price WC101 WC WC WC Wire Guide Upper ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 6x4mm) , , PG , 02PG ( , ), 02PG (NVT) $ WC102 WC WC WC Wire Guide ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (WxH: 5x4mm) (Nirosta) , , , 02PG , 02PG ( ), 02PG (NVT) $ page 29

24 For Power Feed for CHARMILLES WIRE EDM Parts Wire EDM Spare Parts WC001 WC002 WC004 WC005-1 WC006 WC001G WC003 WC005 WC005 WC006-1 WC109 Model Size (mm) Description Position Machine Model Original P/No. Price WC001 12x12x5 Power Feed $27.00 WC001G 12x12x5 Power Feed WC002 25x6x6.4 Power Feed WC x3.8x3 Power Feed WC x19x10 Centering Eye WC005 WC005-1 WC006 WC006-1 OD=50 ID=8 L=24 OD=50 ID=14 L=14 OD=50 ID=8 L=24 OD=50 OD=14 L=14 ROBOFIL 100, 200, 230, 290, 300, 310, 330, 400, 500, 510, 600 X020, X030 (Tungsten Carbide) ROBOFIL 100, 200, 330, 400, 600 (w/o fast cut); 1000, 2000, 4000, 6000 (including micro cut) (WC001 w/ Tin Coated: same conductivity with Pure Tungsten) PO ( ) (NVT) PO ( ) (NVT) $41.00 ROBOFIL 100, 200, 400, $46.00 EF-320, 330, 630, $27.00 ROBOFIL 100, 200, 290, 300, 310, 400, 500, 510, 600, 1000, 2000, 4000, 6000 Pulley ROBOFIL 290, 300, 310, 500, 510 (w/o groove) Pulley ROBOFIL 290, 300, 310, 500, 510, 690 (w/o groove) Pulley ROBOFIL 290, 300, 310, 500, 510 (w/ 4 grooves) Pulley ROBOFIL 290, 300, 310, 500, 510, 690 (w/ 2 grooves) (NVT) $ ( ) $ (NVT) $ ( ) $ (NVT) $ WC109 Tungsten Carbide $40.00 Flushing Cup for CHARMILLES Model Size (mm) Description Position Machine Model Original P/No. Price WC ø Water $15.00 WC201 WC202 WC202 ID=6.8 OD=33.5 L=15.5 Water ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (United 3 parts to one nozzle: Cap with 7mm + Middle Cap + Base ) (Novotec) $33.00 WC203 WC205 WC ø Water $15.00 WC204 7ø Flat $15.00 WC205 6ø Water ROBOFIL 230, $23.00 WC20X 6ø Ceramic nozzle RFI/100/200/400/ $ Connected Parts for CHARMILLES WC501 WC503 WC505 WC506L WC502 WC504 WC506 WC601 Model Size (mm) Description WC501 45ø Plastic Nut L=11 page 30 Position Machine Model Original P/No. Price ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC502 Spring Upper ROBOFIL 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 WC503 WC504 WC505 WC506 WC506L 45ø L=19 OD=20 L=16 OD=20 L=24 Brush ROBOFIL 290, 300, 310, 500, 510, 2030SI $ $ (NVT) $18.00 Plastic Nut Upper ROBOFIL 290, 300, 310, 500, $23.00 Ground ROBOFIL 290, 300, 310, 500, $21.00 Cable Sleeve ROBOFIL 290, 300, 310, 500, $9.00 Sleeve $12.00 WC601 30ø Knife ROBOFIL 230, $ WC ø Threading Upper ROBOFIL 100, 200, 300, 310, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic) $125.00

25 Connected Parts for CHARMILLES WC602-2 WC604 WC605-1 WC608S For Wire Guide for JAPAX WJ102 WJ104A WJ108 WC602 WC605 WC605-2 WC608RS MISC. Parts for CHARMILLES WJ101 WJ103 WJ104B Model Size (mm) Description WC ø Threading WC604 WC605 Power Feed for JAPAX WC Thick=17 L=24 WC Thick=15 L=24 WC608S OD=22 ID=8 Thick=7 WC608RS OD=22 ID=8 Thick=7 Driving Roller Holder Holder Holder Wire EDM Spare Parts WIRE EDM Parts Position Machine Model Original P/No. Price Upper ROBOFIL 100, 200, 300, 310, 330, 400, 500, 510, 600, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (Ceramic) $ ROBOFIL 230, $80.00 ROBOFIL 230, $57.00 Upper ROBOFIL 230, 290, 300, 310, 330, 500, $60.00 ROBOFIL 1020, 2020, 4020, $60.00 Bearing stainless steel w/o rubber seal SS608 ZZ $10.00 Bearing stainless steel w/ rubber seal SS608 2RS $10.00 Model Size (mm) Description Position Machine Model Original P/No. Price WJ WJ Wire Guide Upper EXP.LUB. LS-S. LS-X. LV. LUX. SSZ1106 SSZ1107 $ WJ LXE. LXR. LDM. SSZ1108 ELVY (Manual/ WJ WJ WJ WJ WJ WJ WJ104A-08 WJ104A-10 WJ104A-12 WJ104B-08 WJ104B-10 WJ104B-12 WJ WJ WJ AF) Wire Guide EXP.LUB. LS-S. LS-X. LV. LUX. LXE. LXR. LDM. ELVY (Manual/ AF) Wire Guide Upper LS-A, LU3B (Manual) Wire Guide LS-A (Manual, Float Type) L=44mm Wire Guide LS-A (Manual) L=28mm EDM & ACCESSORIES Model Description Position Machine Model Original P/No. Price WC Current Transmitter Upper $85.00 WC Ground Cable for Charmilles $ EDM WC Machining Cable for Charmilles EDM $ SSZ2106 SSZ2107 SSZ2108 SSZ1006 SSZ1007 SSZ1008 SSZ3006 SSZ3007 SSZ3008 SSZ2006 SSZ2007 SSZ2008 $ $ $ $ Wire Guide AMADA Japax SSZ0010 $ WJ001 WJ002 Model Size (mm) Description Position Machine Model Original P/No. Price WJ001 10x4x7 Power Feed LS-A, L, LXR (AF3) MGK0001 $11.00 WJ x10.5x7 Power Feed LS-A (Float Type), LS-S, LS-X, MGS1122 $28.00 LU3B, LUX-3, LV-3, LX, LX-S, LXE, LXRLDM, ELVY, EXP20, LDM, FA, FAS WJ003 20x20x7 Power Feed LDM (AF-4), LXR-S, EXP, LUX, LXR, LV, LXE AF4G003 $62.00 WJ004 12X6X6 Power Feed Upper LS-A, LS-S, LS-X, LU3B, LUX-3, LV- 3, LXE, LXR, LDM, ELVY, LDM-S MGK0101 $26.00 WJ003 WJ004 Connected Parts for JAPAX WJ301-1 WJ302 Model Size (mm) Description Position Machine Model Original P/No. Price WJ x24x20 Urethane Roller 30RL-B-103 (bearing not included) $ steel- WJ302 Flange 80AR-LDM-100 $ page 31

26 Flushing Cup for JAPAX WIRE EDM Parts Wire EDM Spare Parts WJ201 WJ203 WJ206 WJ208 WJ210 WJ212 WJ202 WJ205 WJ207 WJ209 WJ211 WJ214 WJ2421 Model Size (mm) Description Position Machine Model Original P/No. Price WJ201 6ø Water LS-S, LS-X, LU, LD MGS $15.00 WJ202 6ø Water LS-S, LU, LD MGS1121 $12.00 WJ203 6ø Water LS, LU, LD 111G054 $8.00 WJ205-4 WJ205-5 WJ205-7 WJ206-3 WJ206-4 WJ206-6 WJ ø 5ø 7ø 3ø 4ø 6ø 9ø Water LUX-3 (New Type), LV-3, LXE, EXP, LXR (Manaul), LU, LD Water Upper LUX-3 (New Type), LV-3, LXE, LDM, LXR (Manual/AF), LS-A MGX5003 $9.00 MGX5013 $9.00 WJ207 6ø Water Upper LXE (Manual, Old Type), LS, LD, MGX $13.00 LU, LV WJ208 4ø Water LS-A, LS, LD, LU, LV (Long Type) MGX5014 $14.00 WJ209 8ø Water LS, LD, LU, LV $14.00 WJ210 8ø Water LS-A, LS, LD, LU, LV (Long ) $14.00 L=51x31ømm WJ211 4ø Water AF-4 A4G0001 $9.00 WJ212 6ø Water LDM (AF-4) L=13.5x32mm A4G0002 $9.00 WJ213-4 WJ213-6 WJ214 4ø 6ø Water LUX, LDM LDM2306 $6.00 Adjustment Nut LUX, LDM (Long Type) L=10mm $14.00 WJ2421 WJ2421 WJ2421 WJ2421 LDM Upper LDM2010 $27.00 Filter for Wire EDM/ MITSUBISHI NW-12N NW-20 Model Machine Specifications IN/EX Fit to Models Price (QxQIxH) NW-12A MITSUBISHI 300x29x500mm IN/EX DWC-70, 90, 110, 200 $99.00 N Series NW-12AS MITSUBISHI 300x29x250mm IN/EX DWC-70, 90, 110, 200 $52.00 N Series NW-12N MITSUBISHI 300x29x500mm IN DWC-F, PF, G, PG, H, U, C, HA, PH, HP, HS, $85.00 H31.967/20 PA, P, SX Series H31.967/20 MANN Filter $95.00 NW-20 MITSUBISHI 300x58x500mm IN/EX w/ DWC90B, DWC90SB, DWC110A, DWC- $85.00 nipple 110SA, DWC-90, 110, Z, SZ, SZP Series H /20 MANN Filter $95.00 NW-21 MITSUBISHI 340x46x300mm IN/EX w/ DWC-FX-10FX-2K, CX Series $85.00 nipple H MANN Filter $95.00 H /20 NW-21 Filter for Wire EDM/ SODICK NW-17 NW-18N NW-18H NW-11 H /20 Model Machine Specifications (QxQIxH) NW-18H SODICK 340x46x450mm Depth: 130mm page 32 IN/EX Fit to Models Price IN A(350, 500, 600, 750), A350SSW A(300, 350, 500, 750, 1000)W A500MARK II(20, 21), A500P, BF(250, 275), BF280L, A350SS, A(320, 350)D, A350S $65.00 H /20 MANN Filter $85.00 NW-18N SODICK 340x46x300mm IN/EX A(300, 350, 350W, 500, 500W, 600, 600W, 750, 750W, 1000W, 500P, 500WP, 600P, 600WP) $85.00 H /20 MANN Filter $90.00 NW-17 SODICK 260x46x280mm EX 87 /7~... A(350, 500), EPOC(300, 500, 600, 800, 1100), A350S, A350SSW, AP(150, 200, 300, 330, 450), A(350, 500)W, 87/7~ SCG-150, AW(330, 453)W $42.00 H26.644/20 MANN Filter $55.00 NW-11 SODICK 150x33x345mm 150x33x350mm $17.00 EX GOW(3, 5), EPOC3WS, C(2, 3, 4, 5)F, AP(150, 300), G3A, EPOC(3, 5, 40)W ~ 87/6..., C(2, 3, 4, 5)P, EPOC(300, 500, 600, 800), ~ 87/6 SCG AW(330, 453), AW(330, 453, 654)W NW-01 SODICK 150x72x450mm EX AP $34.00 NW-25N SODICK 340x46x450mm Inside In/ A320D & A530D... $85.00 Outside out H /20

27 Filter for Wire EDM/ FANUC, ALPHA Wire EDM Spare Parts WIRE EDM Parts EDM & ACCESSORIES NW-18N NW-18H H /20 Model Machine Specifications (QxQIxH) NW-18H FANUC, ALPHA 340x46x450mm Depth: 130mm IN/EX Fit to Models Price IN Model O, P, Q, R, S, V, T CUTMATE TAPECUT W(0, 1, 2, 3, 4), FW340 ALPHA0(A, B, C), ALPHA1(A, B, C) $65.00 H /20 MANN+HUMMEL $85.00 NW-18N FANUC, ALPHA 340x46x300mm IN/EX Model O, P, Q, R, S, V, T $85.00 MATE: W(0, 1, 2, 3, 4), ALPHA0(A, B, C), ALPHA1(A, B, C) H /20 MANN+HUMMEL NW-21A FANUC 340x46x300mm IN/EX w/ nipple New Model 180W $ H /20 Filter for Wire EDM/ BROTHER NW-12N H31.967/20 Model Machine Specifications IN/EX Fit to Models Price (QxQIxH) NW-12N BROTHER 300x29x500mm IN HS(300, 350), HSC300 $85.00 H31.967/20 MANN+HUMMEL $95.00 Filter for Wire EDM/ HITACHI NW-20 H /20 Model Machine Specifications IN/EX Fit to Models Price (QxQIxH) NW-20 HITACHI 300x58x500mm IN/EX w/ nipple H-CUT(3, 4, 5, 6, 8, 203)Q, H-CUT3HP $85.00 H /20 MANN+HUMMEL $95.00 NW-15 HITACHI 300x46x340mm IN H-CUT(304, 406)N, H-CUT(304, 406)P, $65.00 H-CUT(304, 406)S, H-CUT304HP, H- CUT304NP, H-CUT406B, H-CUT406AWF NW-14 HITACHI 260x37x340mm EX H-CUT 304 $72.00 Filter for Wire EDM/ CHARMILLES, AGIE, AMADA NW-19 Model Machine Specifications IN/EX Fit to Models Price (QxQIxH) NW-19 CHARMILLES 150x33x345mm EX ROBOFIL Series AM370 $19.00 AGIE 150x33x375mm AC200, AGICUT(100, 200, 300), AGICUT(100, 200, 300)D DEM(215, 250, 315, 700) AMADA WP(AW1, AW2, AW3) Filter for Wire EDM/ JAPAX NW-17 H26.644/20 NW-11 Model Machine Specifications (QxQIxH) IN/ EX Fit to Models NW-17 JAPAX 260x46x280mm EX D100M DC500NC, DH150PSR, DH300B, DP40, DX85NC, DX80, JL85, LH3A $42.00 H26.644/20 MANN+HUMMEL $60.00 NW-11 JAPAX 150x33x345mm 150x33x350mm EX AT50, ELVY, EXP, EXP20, L300A, LDM35, LDM50, LDMFA, LF3A, LH3A, LL13B, LP3A, LT3A, LPA3A, LSP3A, LS(250, 350, 500, 800, 1000)/A, S, X, LX600M/4, LXEFA, LXE(35, 50) Price $17.00 Filter for Wire EDM/ MAKINO NW-17 Model Machine Specifications IN/EX Fit to Models Price (QxQIxH) NW-13 MAKINO 190x110x550mm EX EC-3025, 3040, 7050(old) Call NW-17 MAKINO 260x46x280mm EX EC-3025, 3040, 3141, 7050, 3141S, 3046N $42.00 H26.644/20 MANN+HUMMEL $60.0 H26.644/20 page 33

28 Filter for Wire EDM/ SEIBU Model Machine Specifications (QxQIxH) IN/EX Fit to Models Price NW-20 NW-11 NW-20 SEIBU 300x58x500mm IN/EX w/ EW-300K1, EWA(5, 7)S, EWA-C3 $85.00 nipple H /20 MANN Filter $95.00 H /20 NW-11 SEIBU 150x33x345mm 150x33x350mm EX EW(25, 30, 35, 250, 300, 400,450, 600, 700, 1000), EW25C, EW300P, EW(300, 450, 600, 700, 1000)K, EW600F2, EW(450, 700)K1, EW(30, 35)N, EWP300A/B $17.00 Filter for Wire EDM/ WASHINO MANN FILTER EDM FILTERS Model Machine Specifications (QxQIxH) IN/EX Fit to Models Price NW-24 WASHINO 260x50x400mm EX $50.00 eline M+H Model Dimension in mm Application Compare to Price d1 x d2 x h d1=od, d2=id, h=ht H /8 340 x 45.5 x 450 OE Filter Charmilles Robofil 240/440 Charmilles & $98.35 H x - x 450 OE Filter Charmilles Unique Long Life Filter, $ New Generation System NW-20 Will fit Mits platforms H /2 340 x - x 450 Multi Mach. Platforms Char. Mitts Unique Long Life Filter, NW-20 Will fit Mits platforms $ H31 967/1 302 x 29 x 507 Mitts DWC, F, G, H, C Brother Machines NW-12N A150 or 1220B-3 $73.10 H /1 302 x - x 507 Mitts, SB, SA, SZ NW-20 $ A244 or 12205QC H /4 340 x - x 328 Multi Mach. Platforms Fanuc ib ic, char. Mitts., makino Unique Long Life Filter NW-21, NW-21A $93.50 H /5 340 x 45.5 x 450 Sodic, Fanuc/ Alpha NW-18H, 1318 B3 and B5 $98.35 Sodick HF-25, HF-25A, KH-25A H15 190/ x 32 x 375 OE Charmilles/ Agie NW-19, NW-11 Japax $19.81 * Use on Wire or Sinker DF100 df H15 475/1 * 150 x 32 x 375 OE Agie Sinker Use on Wire or Sinker Premium OE Filter DF100 DF $25.50 eline * 150 x 32 x 375 Charmilles/ Agie Use on Wire or Sinker Starting Price Point DF100 DF $18.11 GROMAX Special stainless Wire Cut Vise DV053G5 DV150G5 DV520F3-1 DV524C05 Model Dimensions/Description Max. Fit to Machine Price (WxLxThickness+Height) Load DV053G3 2 x4.8 x for clamping and leveling 3.3 Lbs. All brands $ DV053G5 2 x4.8 x for clamping and leveling 3.3 Lbs. All brands $ DV150G3 6 x4.8 x two slots for clamping and leveling 8.8 Lbs. All brands $ DV150G5 6 x4.8 x two slots for clamping and leveling 8.8 Lbs. All brands $ DV500G x3 x (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu $1, DV500G x3 x (1.32 /1.52 /1.72 ) 33 Lbs. Mitsubishi, Seibu $1, DV500F x3 x (13 /17 ) 33 Lbs. Fanuc $1, DV500F x3 x (13 /17 ) 33 Lbs. Fanuc $1, DV520F (18 )x3 x Lbs. Fanuc alpha 1C $1, DV524C (18 )x3 x Lbs. Fanuc $1, DV520F (18 )x3 x increase height on both ends 33 Lbs. Fanuc alpha 1C $1, DVSX1G x3.7 x increase height on both ends 33 Lbs. Mitsubishi, Seibu $1, DV720K x3.2 x Lbs. Sodick AQ535 $1, GROMAX Double-sided Clamping Beam(Ruler) Set of 2 pieces Item No. Dimensions/Description Max. Machine Price (WxLxThickness+Height) Load Set of 2pcs WGC x15.4 x x390x18+5mm 44.4Lbs. 20Kg Any Machine $3, WGC x20 x x510x18+5mm 48.9Lbs. 22Kg Any Machine $3, WGC x25.98 x x660x20+5mm 77.8Lbs. 35Kg Any Machine $3, WGC x27.56 x x700x20+5mm 93.3Lbs. 42Kg Any Machine $3, WGC x29.13 x x740x20+5mm 106.7Lbs. 48Kg Any Machine $3, WGC x34.64 x x880x24+5mm 120Lbs. 54Kg Any Machine $6, WGC x37.8 x x960x26+5mm 128.9Lbs. 58Kg Any Machine $7, Application Wire EDM page 34

29 GROMAX Special stainless Wire Cut Vise Item No. Price WZC-1550 $2, WZC-2250 $2, WZC-3550 $2, WZC-1550 Shown Item No. Dimensions (WxLxTh.) Max. Load Square Workpiece WZC x5.9 x Lbs. 70mm 135x150x15mm 4Kg WZC x5.9 x Lbs. 70mm 135x150x22mm 6Kg WZC x5.9 x Lbs. 70mm 135x150x35mm 8Kg Application Wire EDM GROMAX WTC-45-P WTC-145 WTC-170 WTC-265 WTC-60 WTC-220 Stainless Double Sided Clamping WTC-45 WTC-065 WTC-260 WTC-50 WTC-120 STAINLESS SIDED CLAMPING FOR WIRE EDM Item No. Dimensions/Description Max. Price (WxLxTh.+Height) Load WTC-45-P 2.36 x8.66 x Lbs $ Set of 2 60x220x20+5mm 8Kg WTC x8.66 x Lbs $ set of 2 60x220x20+5mm 8Kg WTC x8.66 x Lbs $ set of 2 100x220x20+5mm 12Kg WTC x4.72 x Lbs $ piece 65x120x15+5mm 8Kg WTC x6.7 x Lbs $ piece 65x170x15+5mm 8Kg WTC x8.66 x Lbs $ piece 60x220x22+5mm 12Kg WTC x8.66 x Lbs $ set of 4 65x220x15mm+5mm 10Kg WTC x4.72 x Lbs $ piece 50x120x15+5mm 8Kg WTC x4.72 x Lbs $ piece 60x120x15+5mm 8Kg WTC x5.9 x Lbs $ piece 120x150x15+5mm 15Kg WTC x8.66 x Lbs $ piece 120x220x15+5mm 20Kg Machine Any Machine GROMAX Special stainless Wire Cut Jig Holder Model DV41D Dimensions/ Description (WxLxThickness) 55x23x12mm flat top 40x23x10mm flat/small 70x23x12mm sharp top 70x23x8mm thin sharp/thin 95x23x12mm Long Type page 35 Fit to Machine Price DVS31 Fanuc, $32.00 Seibu DVS32 Fanuc, $32.00 Seibu DV41D Mitsubishi, $22.00 Sodick DV42D Mitsubishi, $22.00 Sodick DV43D Mitsubishi, $30.00 Sodick DVSDK1 80x24x12mm Sodick $42.00 DU41 70x20x10mm M6 Charmilles $40.00 DU42 70x20x8mm M6 Charmilles $40.00 DU43 D 95x20x10mm Long Type M6 GROMAX Stainless Wire Cut Vise 2 & 4 (WST50, WST100) vises shown D DVSDK1 Charmilles $46.00 Made of stainless steel to resist erosion One piece body construction Hardness: HRC 55 Parallelism & squareness within Precision ground and hardened throughout 1.14 DV43D DV42D 6 vise (WST150) shown Stainless Vise DVS Whole pattern for 4 vises 8 vise (WST200) shown Model WST50 WST100 WST150 WST200 (2 ) (4 ) (6 ) (8 ) Length(inch) Width(inch) Jaw Opening Jaw Depth D Height Weight(lbs) Price $ $ $ $ For horizontal mounting of square workpiece Model 292.3k 292.6HPK Clamping range Max. wt 15.4 lbs 33 lbs of workpiece Weight 3 Lbs 6 Lbs Price $3, $5, EDM & ACCESSORIES The Ultimate Work Holding System Wire EDM Tooling Package 3R-282 $Call Magnum levelling adaptor for mounting a supervise. Just 2 set screws gives extremely quick setting. * Recommand weight of workpiece: 33 lbs 3R HP $3, (Fitted on 3R-282) Holer magnuom, holds up to 7 3/4 workpieces * Max. weight of workpiece: 33 lbs 3R-239.1K Ruler Vise $2, Movable jaws of supervice design provide a wide clamping range for squareworkpieces. * Max. weight of workpiece with one vise: 33 lbs * Max. weight of workpiece with two vise: 440 lbs Wire EDM Tooling Package Have problem locating and holding small workpieces in your wire EDM machine? Starter Kit 3R contains: (A)3R-200.1J-U $ A universal reference element 140 mm long with oval holes, for all machines that have M8 holes spaced at 50 mm in the machine table, 30 to 40 mm from table edge (B)3R-272HP $2, A leveling adaptor providing presetting in three axes outside the machine. And this with a precision that is within thousandths of a millimeter. (C)3R $3, A universal holder for rapid and exact clamping of round workpiece mm dia or square workpieces up to 100 mm. Model (package) Price 3R-249.1HP CALL

30 GROMAX Stainless Vise 1 & 3 VBST30 VIRGIN RESIN REGENERATE RESIN resins for water and wastewater treatment, including deionization Model/ Virgin Resin Price RESIN301 5 lbs $46.00 RESIN lbs $76.00 RESIN lbs $ RESINV010 1C.F. $ Model / Regenerate Resin Price RESINR010 1C.F. $88.00 EDM Wire Neo Power Magnets for Wire EDM Extremely powerful and compact Made of Neody mium-iron-boron Rare Earth magnets Strong enough to hold very large core pieces during EDM operation 3/4 diameter MODEL Price (per box) NPM6(box of 6) $ H 2 O PLUS BLUE Wire EDM Corrosion Inhibitor & Cleaner For use in Wire EDM machines to prevent undesirable corrosion of work pieces and to continuously help keep the machine clean. Once added to the system, H 2 O Plus Blue allows more dirt and waste products to be captured by the fi ltration system, this helps keep the entire machine cleaner. Recommended for new machine installations where tank walls, fi lters, hoses, etc, are free of contamination. A concentration ratio of 0.5 to 100 guarantees optimal rust proofi ng and cleaning. Model Description Price CIC1 1 Gal. Container $ CIC5 5 Gal. Container $ FAST CUTTING / COMPETITIVE PRICE No Acid-Corrosion and No Damage to Resins: The special treatment avoids acid-corrosion on machine and work piece. Filtered water and ph will not be damaged. Thus lengthens the life span of the ion resins. High Surface Quality: The special treatment makes wire surface smooth, free from dirt, rust and grease that causes ineffi cient electric discharge. Standard Weight Control: By perfect control in process, we obtain the standard weight per coil that enables us to maintain the processing time stability and the drawing accuracy, this ensures the stable quality of wire. No Weldment: The rough surface caused by welding could affect the quality and accuracy of performance. The welded wire tends to break which results in lost time to re-thread. High-Dimensional Precision: Due to the control system of diamond dies and lubricant, wire diameter tolerance and roundness tolerance are both limited to 1/μm. No scratch, cracking, twisting and deformation can be found on our wire. Outstanding Straightness: The outstanding straightness and quality of NEW Gromax Zinc Coated wire ensures smooth automatic threading. Specifi cations: Zinc Coated Wire: CU 65% / ZN 35% Brass Wire, Zinc Enriched: CU 60% / ZN 40% NATURE OF WORK SOFT WIRE MEDIUM WIRE HARD WIRE Straight 1 pass cutting x good excellent WIRE DIAMETER DIAMETER BREAKING TENSILE ELONGATION Cutting TYPE TOLERANCE LOAD (N/MM²) STRENGTH % 2 pass cutting (rough and x x excellent finish) Hard 0.10mm (0.004 ) ±0.001mm 1.7 Lbs. 980> 0.4< 3 pass cutting (rough, x x excellent 0.15mm (0.006 ) ( ) 3.8 Lbs. (142,137 psi) finish and re-finish 0.20mm (0.008 ) 6.9 Lbs. Relief 1 pass cutting (relief x good excellent 0.25mm (0.010 ) 10.8 Lbs. Cutting under 10 ) 0.30mm (0.012 ) 15.6 Lbs. 1 pass cutting (relief good excellent x 0.33mm (0.013 ) 18.8 Lbs ) Soft 0.20mm (0.008 ) ±0.001mm 3.1 Lbs. 441> 15< 1 pass cutting (relief over 20 ) VST10 This STAINLESS VISE is suitable for workholding under water. Ideal for wire-cut & drill type EDM where tap water is used as dielectric fluid. Squareness and parallelism within Material: 440 stainless steel. Hardness: HRC 56 Model Length Width Jaw Jaw Price Opening Height VST10 2-9/ /8 $68.00 VBST20 5-1/ $ VBST30 7-1/16 2-7/ /8 $ excellent good x GROMAX Stainless Vise Good for Small Hole EDM!! Specifications: Length: 6.3 Model Price Width: 2.75 Jaw Opening: 3.15 VST25 $ Jaw Height: 1.18 Weight: 10 Lbs VST30 $ Opening:3.74 Made of stainless steel, hardened and precision ground HRC 56 squareness and parallelism within " Good for operation under water GROMAX Adjustable Precision Vise for EDM Top View Parallelism is within /3.94 (0.003mm/ 100mm); squareness is within /3.94 (0.005mm/100mm). Harden treatment is up to HRC 50 ~55. This vise can be adjusted up and down, left and right, forth and back to make parallelism. Strong clamping can stand high water pressure. Model Description Price PV320 Stainless Vise $ mm (0.010 ) ( ) 4.9 Lbs. (63,961 psi) 0.30mm (0.012 ) 7.0 Lbs. x: not recommended page 36

31 EDM Wire EDM & ACCESSORIES Spool Dimensions: Spool Type Lbs. Kg. A B C D P-1R P-3R P-5R P P P DIN DIN DIN A B C Approximate Length of Wire Per Spool in Yards: Wire Dia. P-3R P-5R DIN-160 P-10R DIN-200 P-15R / 22,000 36,500 NA NA NA NA 0.15mm / 12,500 20,800 25,000 41,600 62,400 83, mm / 7,900 13,100 15,800 26,200 39,300 52, mm / 0.30mm 5,400 9,000 10,800 18,000 27,000 36,000 Prices may be changed from London Metal Exchange without notice. Wire for Japanese Models (P Series) ZINC Coated Hard Wire Brass Hard Wire ZINC Coated Soft Wire Brass Soft Wire Spool Type Dia. Model Price/Lbs. Model Price/Lbs. Model Price/Lbs. Model Price/Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-1R 0.10mm (0.004 ) ZP0110 BP0110 $Call $Call BP0110S $Call $Call (3.3 Lbs./1.5 Kg) 0.15mm (0.006 ) ZP0115 BP0115 $Call $Call BP0115 S $Call $Call Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-3R 0.10mm (0.004 ) ZP0310 BP0310 $Call $Call BP0310S $Call $Call (6.6 Lbs./3 Kg) 0.15mm (0.006 ) ZP0315 BP0315 $Call $Call BP0315S $Call $Call 0.20mm (0.008 ) ZP0320 $Call $Call BP0320 $Call $Call ZP0320S $Call $Call BP0320S $Call $Call 0.25mm (0.010 ) ZP0325 $Call $Call BP0325 $Call $Call ZP0325S $Call $Call BP0325S $Call $Call Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 P-5R 0.20mm (0.008 ) ZP0520 $Call $Call BP0520 $Call $Call ZP0520S $Call $Call BP0520S $Call $Call (11 Lbs./5 Kg) 0.25mm (0.010 ) ZP0525 $Call $Call BP0525 $Call $Call ZP0525S $Call $Call BP0525S $Call $Call 0.30mm (0.012 ) ZP0530 $Call $Call BP0530 $Call $Call ZP0530S $Call $Call BP0530S $Call $Call 0.33mm (0.013 ) ZP0533 $Call $Call BP0533 $Call $Call ZP0533S $Call $Call BP0533S $Call $Call Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 20 and up 1~19 30 and up 1~29 P mm (0.008 ) ZP05206 $Call $Call BP05206 $Call $Call ZP05206S $Call $Call BP05206S $Call $Call (13.2 Lbs./6 Kg) 0.25mm (0.010 ) ZP05256 $Call $Call BP05256 $Call $Call ZP05256S $Call $Call BP05256S $Call $Call 0.30mm (0.012 ) ZP05306 $Call $Call BP05306 $Call $Call ZP05306S $Call $Call BP05306S $Call $Call 0.33mm (0.013 ) ZP05336 $Call $Call BP05336 $Call $Call ZP05336S $Call $Call BP05336S $Call $Call Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 10 and up 1~9 20 and up 1~19 P mm (0.008 ) ZP1020 $Call $Call BP1020 $Call $Call ZP1020S $Call $Call BP1020S $Call $Call (22 Lbs./10 Kg) 0.25mm (0.010 ) ZP1025 $Call $Call BP1025 $Call $Call ZP1025S $Call $Call BP1025S $Call $Call 0.30mm (0.012 ) ZP1030 $Call $Call BP1030 $Call $Call ZP1030S $Call $Call BP1030S $Call $Call 0.33mm (0.013 ) ZP1033 $Call $Call BP1033 $Call $Call ZP1033S $Call $Call BP1033S $Call $Call Quantity of Order (Spool) 10 and up 1~9 10 and up 1~9 10 and up 1~9 10 and up 1~9 P mm (0.008 ) ZP1520 $Call $Call BP1520 $Call $Call ZP1520S $Call $Call BP1520S $Call $Call (44 Lbs./20 Kg) 0.25mm (0.010 ) ZP1525 $Call $Call BP1525 $Call $Call ZP1525S $Call $Call BP1525S $Call $Call 0.30mm (0.012 ) ZP1530 $Call $Call BP1530 $Call $Call ZP1530S $Call $Call BP1530S $Call $Call 0.33mm (0.013 ) ZP1533 $Call $Call BP1533 $Call $Call ZP1533S $Call $Call BP1533S $Call $Call Wire for European Models (DIN Series) ZINC Coated Hard Wire BRASS Hard Wire ZINC Coated Soft Wire BRASS Soft Wire Spool Type Dia. Model Price/Lbs. Model Price/Lbs. Model Price/Lbs. Model Price/Lbs. Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN mm (0.004 ) ZD1210 BD1210 $Call $Call ZD1210S BD1210S $Call $Call (7.7 Lbs./3.5 Kg) 0.15mm (0.006 ) ZD1215 BD1215 $Call $Call ZD1215S BD1215S $Call $Call 0.20mm (0.008 ) ZD1220 $Call $Call BD1220 $Call $Call ZD1220S $Call $Call BD1220S $Call $Call 0.25mm (0.010 ) ZD1225 $Call $Call BD1225 $Call $Call ZD1225S $Call $Call BD1225S $Call $Call Quantity of Order (Spool) 30 and up 1~29 30 and up 1~29 30 and up 1~29 30 and up 1~29 DIN mm (0.008 ) ZD1620 $Call $Call BD1620 $Call $Call ZD1620S $Call $Call BD1620S $Call $Call (17.6 Lbs./8 Kg) 0.25mm (0.010 ) ZD1625 $Call $Call BD1625 $Call $Call ZD1625S $Call $Call BD1625S $Call $Call 0.30mm (0.012 ) ZD1630 $Call $Call BD1630 $Call $Call ZD1630S $Call $Call BD1630S $Call $Call 0.33mm (0.013 ) ZD1633 $Call $Call BD1633 $Call $Call ZD1633S $Call $Call BD1633S $Call $Call Quantity of Order (Spool) 20 and up 1~19 20 and up 1~19 20 and up 1~19 20 and up 1~19 DIN mm (0.008 ) ZD2020 $Call $Call BD2020 $Call $Call ZD2020S $Call $Call BD2020S $Call $Call (35.2 Lbs./16 Kg) 0.25mm (0.010 ) ZD2025 $Call $Call BD2025 $Call $Call ZD2025S $Call $Call BD2025S $Call $Call 0.30mm (0.012 ) ZD2030 $Call $Call BD2030 $Call $Call ZD2030S $Call $Call BD2030S $Call $Call 0.33mm (0.013 ) ZD2033 $Call $Call BD2033 $Call $Call ZD2033S $Call $Call BD2033S $Call $Call page 37

32 GROMAX CNC Orbiting-Cut System GROMAX EDM RAM (A) V-Block Type Adapter 3R-A3620 (3R) $ T-3620 (Taiwan) $ R Adapter 3R-A11489 $ This part can be replaced by 3R or EROWA Tooling system EROWA Adapter Hirschmann Adapter Computer Control Specification: Feature Membrane keyboard over 30 operation tracks Z-lock and LORAN mode control Motion Direct Circle, Square, Hexagon X Indicator and + available Power AC 110 V, 0.4KVA Dimension Setting Orbit Speed /Sec. in 10 Steps Dimension 16.5 x 13.8 x 11.1 (WxDxH) Weight 42 LBS. for: 3R TOOLING EDM-MARCO EDM-MINI etc. for: 3R S EROWA Tooling Set Hirschmann Tooling Set Upgrade manual EDM up to 80% CNC functions; Reduce machining time 100% & electrode wear 30%; Improves surface fi nish 50% (A) Orbit-Cut Head Specification Feature Suitable for any EDM Model (A) Price Max. Electrode Wt. ORBIT15C (controller) +ORBIT15H (head) $9, LBS. Size (LxWxH) 7.87 x 7.87 x 8.66 Weight 30 LBS. X, Y Travel ± Repeat Accuracy Cuts at 45 0 for corner sharpening Hexagon machining Makes it easy to engrave a T-type channel Screw mold function Preventing buildups of debris and deformation in boring a deep hole & big plane Different sizes of cavity machining can be done using just one size of electrode. GROMAX Rotating Spindles 1/15 Horsepower Weight: 9 lbs HARIG EDM Roto-Spindle Model Price E-5 ( ) $1, E-20 ( ) $1, shank sizes: 1/2 (for E-5) 20mm (for E-20) Flush-Chuck For Roto-Spindle & other EDM rotating spindles Speeds hole-making up to 50% faster while improving accuracy & reducing electrode wear Variable speed motor operates rpm on 110V Current through spindle 10amp max. Spindle Accuracy Two Models: E-5: ER-20 or RD-20 collets up to 1/2 E-20 holds 20mm holder Optional Accessories: Price ER20 or RD20 collets set of 12 $ Flush-Chuck for E-5 with 1/2 shank $ Flush-Chuck for E-20 with 20 mm shank using ROHM chuck (capacity 0~1/8 ) $ Model Price RS200 Set $3, RS200 $2, Spindel Only RS200.CRT $ Controller Flush hole Model Price 3R-1.6S $18, R Rotating Spindle Electrically-driven Rotating Spindle for electrode on Mini Holders rpm 3R Hi-Speed Rotating Spindle Complete Set Model: HS (High Speed) page rpm Model Wt. Price per set 1.321HS 6Lbs $11, ~16mm 15 pcs collet set Specifications: Weight/spindle: 9 Lbs controller: 3 Lbs collet set: 4 Lbs Speed range: 0~250 rpm Control Unit: 110 VAC Collet: 1~16mm, 15 pcs set ER25 Rotating spindles designed for small hole operation with tubular electrodes; Side fl ush hole design allow to flush through the electrodes; Higher metal removal rate for deep hole operations (fl ushing + rotating = less machining time); Reduce electrode wear & improve fi nish with straighter hole.

33 New Harig Ultra-Grind No. 5C-V An Advanced Combination 5C Collet/V-Block System Long-life tool steel body Advanced ball and curved race ultra-precise, pre-loaded bearing Precision 24 division index (15 ) Stop pin and adjustable stops with sine arrangement for other angles plus handy lock 360 graduated dial & purge system $3, Ultra-Grind No. 5C-V (w/ 1/2 5C collet, v-block & carrying case) Front View The Harig Ultra-Grind No. 5C-V is the version of the popular combination 5C Collet/V-Block fixture. The Harig unit offers long-life, high accuracy, reliability and many features. Quick, easy change over from Collet to V-Block. The advanced bearing is ideal for motorizing. Lube Port and Purge Line permits more EDM applications; includes 1/2 5C Collet center height enhances modular system. Harig Large Capacity Grind-All Fixture No.2 Model Price $4, For large capacity work including punch grinding 2 dia. V-block capacity Large face-plate area Horizontal mounting arrangement Optional rotary table mechanism High quality tool steel construction for tenths accuracy and long life EDM & ACCESSORIES HARIG Uni-Dex Ultra Precision Collet Fixture 2 mounting holes for easy set-up 24 divisions allows positioning in every seconds accuracy 2.2" diameter hub for quick interchange of accessories 5C collet confi guration, holder ground in assembly to under " runout Tool steel housing w/ intergral ball & race bearing for highest accuracy Dial graduation 360 o ; Complete w/ 1/2" 5C collet Model Price Weight: 11 Lbs $2, Optional Accessories: Model Price Face Plate (5 dia. w/ adapter shank) $ Jaw Chuck (w/ adapter shank) $ Magnetic Chuck (w/ adapter shank) $ Accessories No. 5C-V Specifications: Center Height Graduations Collet... 5C & 5ST V-Block Attachment / 4 dia. Purge Port... 1/8-NPT tapped entry Index Divisions... 24, every sec. Weight lbs $ Ultra-Grind Motor (variable speed w/ control, bracket & belt) Rough turn, cylindrical grind, grind rectangular and radii with ± accuracy 24 Index division & 360º graduation Comes with carrying case Specifications: V- Block capacity: 1-1/4 Center height:3 Model Price HARIG Grind-All Fixture Model No $2, Back View Optional Accessories: Ultra-Grind Motor Attachment (50-550rpm) $ Face Plate (5 dia. w/ adapter shank) $ Jaw Chuck (w/ adapter shank) $ Magnetic Chuck (4-3/4 dia. 2-1/4 thick) $ Optional Accessories: Super Wee-Blocks (holding ~9/32 ) $ Ball-Seat Punch Adapter $ Face Plate (6 dia.) $ Magnetic Chuck (4 dia.) $ Hite-Angle Plate (9-1/2 x5 x4 wide) $ Grind-All No.2 w/ standard face-plate & v-block $ Radius Dresser Arm Specifications: Grind-All No.2 w/ V-Block Capacity... 2 standard face-plate, Face-Plate Diameter 6 7 / 8 v-block & rotary table Center Height Index Divisions Graduation Net Weight lbs. Graduated in 360 V-BLOCK slides in face-plate and is also easily removable FACE PLATE is 6 7 / 8 in diameter and has tapped holes for mounting purposes. Adjustable Stops and PIN to permit stopping of swing at any desired angle. Use spacer to set at any desired angle using the sine principle. Index & Rotary Table Work Face Plate Work page 39 HAND CRANK for easy rotation and is removable when mounting unit horizontally. LOCKING SCREW to lock plate at any angle. OPTIONAL ROTARY TABLE MECHANISM Handwheel easily removed when not in use. Optional Rotary Table Mechanism available providing a geared arrangement for rotating face-plate. This rotary table arrangement is ideal for light milling and for rotary grinding. 24 division index allows for index table work. Plate is 6 7 / 8 dia. Easily mounts on Surface Grinder, Milling Machine, Jig Borer, etc., for precision face plate work. Use for generating a radius or for indexing with 24 division index. Also can be set to any angle with built-in sine arrangement. Face-plate has tapped holes for easy mounting. Submersible Spin-Grinding Fixture With the Imperial Newbould Grindit Spin Fixture you are able to: spin grind, install radii and angles, use on a milling machine, submerge in EDM fluid, and inspect angles or roundness. Model Wt. Price IM lbs $call Motorized Spin-Grinding Fixture for Installing Radii and Angles Includes: #300 GRINDIT with 5-C insert, collet nut & 2 stops V-Block Package with clamp, screws & rails Motor Package with mount, screws & 3 drive belts Partstop for use with V-Block Partstop for use with collet Wooden Case include with complete package Specifications: Spindle Roundness 50 millionth TIR Deflection +/ /4 Out Topside Shotpin 10 arc-second repeatability Center Height /-.002 from bottom Thru Hole 1-1/4 plus Weight 14 lbs Base Size 3-1/2 x 4 Height 5 Bottom Holes 2-1/2 centers Material Available in A-2 or 440C Stainless Steel V-Block Capacity 1-1/2 Distance Between V-Block Keys V-Block Width HARIG Twin Angle Holding Fixture For holding electrodes on an EDM machine Hardened & Ground to a tenth s accuracy Two models available with removable ground shanks, 2 long, in two diameters: 3/4 or 20mm. Complete with Shank & Clamp Model V size Price /8 x2 7/8 and 1 3/8 x1 7/8 $ /4 x 2 1/4 and 2 1/4 x 2 $649.00

34 Ultra precision collet chucks made of special tool steel, hardened & ground to assure maximum accuracy. (concentricity at 2 from collet) Mini design allow access to otherwise hard to reach spots and help to reduce small tool breakages Self-releasing eliminated tools sticking in collets. O.S. WALKER EDM Workholding Chucks O.S. WALKER Ceramax Permanent Magnetic Chuck O.S. WALKER Fine Division Long Bar Pole Electromagnetic Chuck Sets include: 20mm shank chuck-holder spanner & fi tted case ER16 10pcs set: 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8 ER20 12pcs set: 1/16, 3/32,1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2 Model Gromax ER Collet ER11 $16.00/ each ER16 $16.00/ each ER20 $17.00/ each ER25 $19.00/ each ER32 $19.00/ each ER40 $24.00/ each EDM & ACCESSORIES 20mm ER Collet- Chuck Set Description #of colletchuck per set Shank length 3R Precision Electrode Former FC750 with 3R Manual Chuck (3R S) Model Price FC750 $3, Weight Wt lbs 16 lbs Price 5010 ER16 10 PCS 50mm 2 $ ER16 10 PCS 100mm 2 $ ER16 10 PCS 150mm 3 $ ER20 12 PCS 60mm 3 $ ER20 12 PCS 120mm 3 $ ER20 12 PCS 180mm 3 $ One piece body construction; Hardened tool steel throughour; 3R Manual Chuck in Places; Revolving type handle for easy rotation. Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Simple and inexpensive tooling designs Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any electric chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation No complicated set-ups Accurate repeatability Model Size Height Watt. Wt. (lbs.) Automatic Release Control page 40 Touch pad control allows easy selection of full, residual, variable, and release positions Automatic release cycle assures workpiece release, freeing machine operator from manual operation Input 115VAC/ Output 0-110VDC Manual Release Control Maximum reliability - Printed circuit boards plug in for ease of service Conveniently located control dial and switch simplify adjustment 0-100% variable holding power adjustment Easily mounted with external tab Input 115VAC/ Output 0-110VDC Price LBP48 4 x8 2-7/ $1, LBP410 4 x10 2-7/ $1, LBP510 5 x10 2-7/ $1, LBP512 5 x12 2-7/ $1, LBP610 6 x10 2-7/ $1, LBP612 6 x12 2-7/ $1, LBP614 6 x14 2-7/ $1, LBP618 6 x18 2-7/ $1, LBP815 8 x15 2-7/ $2, LBP818 8 x18 2-7/ $2, LBP820 8 x20 2-7/ $2, LBP824 8 x24 2-7/ $3, LBP x15 2-7/ $3, LBP x18 2-7/ $3, LBP x20 2-7/ $4, LBP x24 2-7/ $4, LBP x18 3-1/ $4, LBP x24 3-1/ $4, LBP x32 3-1/8 281 $11, Model Watt. Wt. Price SMART-1B lbs $1, SMART-3B lbs $1, SMART-5B lbs $1, Model Watt. Wt Price SCV lbs $ Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions - for more uniform magnetic holding of small parts Solid construction top plate - protects permanent magnetic pack from penetration of EDM fl uids. Provides stronger, more rigid work surface Lowest height of any permanent chuck - for added clearance on larger workpieces Magnetic fi eld does not affect EDM operation Can be used inverted for holding electrode ram Easily installed and operated No complicated set-ups Accurate repeatability * Two handles Model Size Height Wt. Price (lbs) CER44 4 x4 2-3/8 13 $1, CER48 4 x8 2-3/8 25 $2, CER510 5 x10 2-5/8 36 $2, CER512 5 x12 2-5/8 45 $2, CER x /8 33 $call CER610 6 x10 2-5/8 45 $2, CER612 6 x12 2-3/4 56 $2, CER614 6 x14 2-3/4 66 $2, CER618 6 x18 2-3/4 84 $2, CER815 8 x15 2-3/4 94 $3, CER818 8 x18 2-3/4 113 $3, CER820 8 x20 2-3/4 131 $3, CER824 8 x24 2-3/4 150 $4, CER x15 2-3/4 118 $4, CER x18 2-3/4 131 $4, CER x20 2-3/4 163 $4, CER x24 3-5/8 175 $7, CER1030* 10 x30 3-3/4 306 $call CER x18 3-5/8 206 $6, CER x24 3-5/8 250 $7, CER1236* 12 x36 4-5/8 563 $Call CER1248* 12 x48 4-5/8 630 $Call O.S. WALKER Magnetic Fixture/ Sinker EDM Made of Neodymium-Iron-Boron rare earth magnet Can be immersed in dielectric fluid Precision ground fl at, square and parallel to an accuracy of.0005 ON/OFF switch with removable handle Model Size(inch) Price WML 2 1/2 x2 1/2 x5 1/8 Call

35 GROMAX Permanent Magnetic Chuck for EDM and Surface Grinder Micro pitch pole spacing Low profi le & strong rare-earth magnet Variable holding position with removable on/off activation handle Ultra thin chuck only 1.77 thick Thin & light weight work piece are ideally suitable because of fi ne-pitched magnetic poles KRTW Series 10 Pole per inch Oil-proof type is specially designed for EDM Double-Face Attracting Permanent Magnetic Block [Model KPB] EDM Low Profile Oil Proof Oil Proof Type RMWH-3060A Shown Micropitch Permanent Magneic chuck Application: The double-face attraction can fix work in any location on the table with switch operation. Mounting position can be easily adjusted and any work can be held precisely by using 3 blocks of large, middle and small sizes. Widely usable as a holding fixture of any type of work, not only for electro-discharging work. KPB-2F15B KRTW: Fine pole Permanent Magnetic Chuck RMWH: Micropitch Permanent Magneic Chuck Nominal Wt. Model Price Model Price Dimension LBS 3 X5 7 RMWH-713B $ X 7 12 KRTW1018A $ RMWH-1018B $ X10 18 RMWH-1025B $ X12 21 RMWH-1030B $ X10 22 RMWH-1325B $ X 6 15 KRTW1515A $ RMWH-1515B $ X KRTW1530A $ RMWH-1530B $1, X KRTW1535A $1, RMWH-1535B $1, X KRTW1540A $1, X KRTW1545A $1, RMWH-1545B $1, X KRTW2035A $1, RMWH-2035B $1, X KRTW2040A $1, RMWH-2040B $1, X KRTW2045A $1, X KRTW2050A $2, RMWH-2050B $2, X KRTW2060A $2, RMWH-2060B $2, X KRTW2525A $1, RMWH-2525B $1, X KRTW2530A $1, RMWH-2530B $1, X KRTW3050A $2, RMWH-3050B $3, X KRTW3060A $3, RMWH-3060B $3, Double-Face Attracting Permanent Magnetic Chuck [Model: RMWH-2F] EDM & ACCESSORIES Magnetic force of work face (top) and mounting face (bottom) is controlled individually with the removable ON/OFF handle. Constructed for water proffness. Precision: Flatness in (0.015mm), Parallelism in (0.03mm) The work can be attracted in any size by combining the magnetic block. Powerful magnetic block never disturbs the operation and the magnetic force can switch ON/OFF by a turn of the removable handle. The set includes one pair of blocks. (Parallelism is within ) Water-proof constructed. Double-face attraction permits the setting of the work freely, at any position on the machine table. Model Nominal Dimension Holding Power Dimension Mass Price Width Length Height KPB-2F15B 2.0 x N lbs.x2 $1, KPB-2F20B 2.0 x N lbs.x2 $1, KPB-2F30B 2.0 x N lbs.x2 $1, Model Nominal Dimension Mass Price Dimension Width Length Height RMWH-2F.1530A 6 x LBS $2, GREEN Synthetic EDM Fluid The Only EDM Dielectric With Chemical Satellite Electrodes, Putting The Green In Your Machines Cut Faster & Less Electrode Wear What Makes Green Different? Faster finishing rates, a result of even spark distribution Pure synthetic product eliminates frequent oil changes Eliminates DC arcing & dead zones Ends Skin Irritation No hazardous ingredients - safe for environment and your skin 99.99% Odorless Reduce Electrode Wear Increase Metal Removal Rate of 15% Reduces electrode wear up to 30% Improve Surface Quality. Model Description Price GSEF55 55 Gallon Drum $ GSEF5 5 Gallon Container $ Shipping from east or west coast warehouse. Please call for more details! IonoPlus IME-MH page 41 Royal Flush Semi-Synthetic EDM Fluid Low viscosity with excellent non-clogging fl ow and backwash characteristics due to highly refi ned base stock Superior resistance to ultraviolet light (will not discolor) Much more stable fl uid, higher fl ash point, pour point of -54 C EPA tests on all components show non-sensitizing, non-toxic, and non-irritating High dielectric strength Non-detectable odor 3~4 times the oxidation stability Model Description Price RFEF55 55 Gallon Drum $ RFEF5 5 Gallon Pail $ GROMAX 5 Micron Filter 2 1 / 8 ID 6 OD 18 FLT-FT can be used for Easco, Sparcatron, Elox, Eltee, Gromax, Maximart, Sodick, Xermac FLT-FT $35.00/ea FLT-SUTE $35.00/ea IonoPlus vs. Royal Flush IonoPlus Appearance Fluorescent green Royal Flush Clear bright Specifi c Gravity 0.79 g/ml 0.83 g/ml Vapor Density 6.0 Lbs./gal. 6.9 Lbs./gal. Flash Point (c.o.c) 243 F 266 F Pour Point -15 C -54 C 5 Micron, pleated paper media, Buna grommet seal, service handle, wire mesh outer body 1 1 / 4 ID FLT-SUTE can be used for Agie-Mondo Series, Charmilles Roboform Series, Chevalier, CHMR, 14 Hansvedt, Pacifi c Controls, Santec/Sharp 6 OD

36 EROWA EDM Basic Tooling ITS Repeatability: 2 m Owing to the combination of flexing and rigid components patented wordwise. Set A: ER Set C: ER ER ITS Basic chuck 50 1 ER Spigot LC Manual 1 ER Prisround 1 Plastic Packing Box 1 Price $ Set B: ER ER ITS Basic chuck 50 1 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, 105mm 1 Plastic Packing Box 1 Price $1, EROWA EDM Compact Tooling The small, accurate, automatic tooling system for Micromechanics and EDM ER The standard mechanical interface between milling, grinding, turning, drilling, EDM die-sinking centers and measuring or presetting stations. The economical tooling system with a high degree of precision and repeatability for flexible production. The correct procedure to benefit from the EROWA Tooling Sets: Drill holes and cut threads as required to mount electrode onto ITS electrode holder Clamp into lathe chuck or mill chuck and machine Clamp into EDM chuck and start EDMing The center point stays with the electrode, as long as it is kept on the holder Every tooling set is compatible and will fit into later investment ER ITS Basic chuck 50 Model Wt. Price Lbs $ Set D: ER ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, 105mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 Price $2, Centering Plate 50 ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet 120x170mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 Price $3, Version: Set of 50 plates, rust-resistant, including 4 supporting feet each Application: small electrode weight Fixation: Mounted directly on plane surface of blank Model Price $1, Set E: ER ER ITS Basic chuck 50 2 ER Spigot LC Manual 2 ER Prisround 1 ER Uniplate 1 ER Uniholder 1 ER Uniblank 1 ER ITS Basic Pallet, 105mm 1 ER ITS Basic Pallet 120x170mm 1 ER ITS Basic Plate 1 Plastic Packing Box 1 Price $2, Accuracy: 0.002mm ( ) guaranteed through flexible centering Store capacity: 900 electrodes per square meter 4 x 90 indexable Parts size up to 50 x 50 x 100mm Designed for automation ER Compact-ITS adaper chuck $2, ER Compact chuck $2, ER Table pneumatically activated Compack chuck PA $3, ER Compact checking pin $ ER Compact uniholder $ ER Compact- prisround 15mm $ ER Compact electrode holder 16mm $ ER Compact collet chuck holder $ ER Compact standard holder $ ER ER High Performance Compact Design Economical Price ER ER ER ER ER ER ER Compact Electrode Holder Set $ Article no. Description No. of unit Stud bolt M5x Stud bole M5x Stud bolt M5 x 6 16 ER Compact Prisround 10mm 4 ER Compact Prisround 15mm 4 ER Compact Uniholder ER ER Compact Electrode holder 8mm 2ER ER ER Compact Electrode Holder 12mm 2 ER Compact Electrode Holder 16mm 2 ER Compact standard Holder 6 ER ER ER ER page 42

37 3R Macro Combi Macro Combi provides simutaneous access to Macro and Macro Junior Systems 2 sizes of electrode holder in the same chuck! Macro - With the highest accuracy on the market for large electrodes Macro Junior - Large enough for the majority of all electrodes. The small size permits Macrojunior to machine very deep cavities. Starter Kit US S Includes: Description qty 3R manual combi machining block 1 3R Macro control rule 1 3R Macro combi drawbar 5 3R Junior combi drawbar 5 3R S Pallet Macro 54x54mm 6 3R-491 Junior electrode holder 30 3R-P14.5x14 self-threading screw for R-465-L Holder, macro Junior 2 3R-465-V Holder, macro Junior 2 3R S Intermediate plate, Macro 54x54mm 2 3R S Holder, Macro 54x54mm 2 3R S Holder, Macro 54x54mm 2 3R-333-T20 Screwdriver, TORX 1 3R Torque wrench, 4Nm 1 Price $7, Systems, One Chuck, No Adaptor Manual Combi Starter Kit contains the necessary tooling to get started with system 3R s New Combi System. Electrode Holder with 50 mm long, unhardened electrode-mounting part Manual chuck for vertical or horizontal mounting on machine table. Electrode can be indexed 4x90 Model Price 3R $2, Designed for use in turning electrodes. Comes with set screws for mounting on a lathe taper and centering adjustment. Electrode can be indexed 4x90 EDM & ACCESSORIES EDM Electrode Shanks Model Price per set 3R-322/50S (set of 30) $ R-322/50E (set of 30) $ Quality imiport 2050 (set of 10) $ E (set of 30) $ Mini Block 322/50E 322/50S Manual Chuck 4x90 Electrode Holders EHV10 with 3R Reference Element Can be attached on to 3R Chuck; Vise mounted on 3R Reference Element (54x54mm). Model Length Width Jaw Opening Jaw Ht. WT. lbs EHV /16 2 3/16 1 1/ Model 3R R R-491 3R R Manual Combi Macro Control Rule Junior Electrode Marco Combi Juniro Combi Machining block Holder Drawbar Drawbar Price EHV10 $ Electrode Holders (Can fit to 3R Mini Block) EH20: with 20mm shank EH20S: Stainless holder Can be attached on to 3R Mini Block & other tooling; 1 mini vise can be mounted horizon-tally or vertically for different needs; HRC 60 Tollarance: Parallelism and Squareness are with / 4 Model Length Width Jaw Jaw WT. Opening Height lbs EH20 2-9/ /16 13/ EH20S 2-9/ /16 13/ Model Price EH20 $98.00 EH20S $ page 43 GROMAX Electrode Holders EH25: with 20mm shank EH25S: Stainless Holder Precision vise mounted on a 20mm shank larger capacity. Model Price EH25 $ EH25S $ Model Length Width Jaw Jaw Wt Opening Height EH /16 1 7/ /16 5 Lbs EH25S 3 15/16 1 7/ /16 5 Lbs Tollarance: Parallelism and Squareness are with / 4 Model Price 3R x90 $1, Manual Mini Chuck For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Quick and exact mounting of electrode with accuracy of repetition inch/mm: / mm Indexing 4x90. Intermediate angle set with Vernier scale Connection for pressure/suction fl ushing through the electrode Hydraulic clamping of electrode For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620. Manual C-Axis Mini Chuck Quick and exact mounting of electrode with accuracy of repetition inch/mm: / mm Indexing 24x15. Intermediate angle set with Vernier scale Connection for pressure/ suction fl ushing through the electrode Hydraulic clamping of electrode Model Price 3R $1, R-A3620 $ Model Price 3R $call 3R-A3620 $825.00

GROW TO THE MAX. Gromax Enterprises Corporation. Page 58 Lathe & Accessories. Page 4 EDM & Accessories. Page 87. Page 113. Page 66 Machine Shop Supply

GROW TO THE MAX. Gromax Enterprises Corporation. Page 58 Lathe & Accessories. Page 4 EDM & Accessories. Page 87. Page 113. Page 66 Machine Shop Supply GROW TO THE MAX Page 4 EDM & Accessories Page 12 Wire EDM Parts/ Tubing Page 40 Grinder & Accessories Page 58 Lathe & Accessories Page 66 Machine Shop Supply Page 77 Milling Machine & Accessories Page

More information

Table of Contents. Laser Marker, Welder, Cutter Page Laser Marker 4 Laser Welder 6 Laser Cutter 7

Table of Contents. Laser Marker, Welder, Cutter Page Laser Marker 4 Laser Welder 6 Laser Cutter 7 Table of Contents Laser Marker, Welder, Cutter Page Laser Marker 4 Laser Welder 6 Laser Cutter 7 Sinker EDM Page CNC EDM 8 Conventional/ ZNC EDM 9 Small Hole EDM 12 Chiller 15 Tubing/ Ceramic Guide 16

More information

CNC Vertical Machining Centers

CNC Vertical Machining Centers CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers

More information

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range

More information

Performance LargeSeries

Performance LargeSeries Performance LargeSeries Vertical Machining Centers jyoti.co.in Performance Large Series Vertical Machining Center OVERVIEW VMC Large Series have versatility and capacity to carryout maximum range of jobs,

More information

BARON-MAX VL Range Vertical Machining Centers

BARON-MAX VL Range Vertical Machining Centers BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance

More information

BARON-MAX VB Series Vertical Machining Centers

BARON-MAX VB Series Vertical Machining Centers BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow

More information

Centers. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine

Centers. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining

More information

NXV1020A. High Performance Vertical Machining Center

NXV1020A. High Performance Vertical Machining Center STANDARD FEATURES POWERFUL 25 HP IDD SPINDLE BBT TYPE HIGH SPEED 24 TOOL SWING-ARM ATC SYSTEM MXP 200FA WITH MANUAL GUIDE I 60 DEGREE CHIP AUGER 12,000 RPM MAXIMUM SPINDLE SPEED 40mm THK NR TYPE LINEAR

More information

The Storm Range Vertical Machining Centres

The Storm Range Vertical Machining Centres www.colchester-harrison.com The Storm Range Vertical Machining Centres Heavy cast iron base, saddle and table minimise vibration during heavy cutting. 40mm pre-tensioned ballscrews, directly coupled to

More information

The Finest Spindle speed

The Finest Spindle speed DESCRIPTION MODEL Distance between centers UNIT G5P-50M/NC 500(0 ) G3P/G38P(M&NC) 60M / NC 100M / 100NC 150M / 150NC 00M / 00NC 600(4 ) 1000(40 ) 1500(60 ) 000(80 ) SUPERTEC Since 1954 GENERAL Swing over

More information

w w w. j y o t i. c o. i n Performance Series Vertical Machining Center

w w w. j y o t i. c o. i n Performance Series Vertical Machining Center w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds

More information

HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER

HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER Micro-drill HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER The YEONG CHIN FV-Series High-Speed, High-Power Vertical Machining Centers are specially

More information

U3 CNC Wire EDM For reference only Please request an official quotation

U3 CNC Wire EDM For reference only Please request an official quotation U3 U3 CNC Wire EDM For reference only Please request an official quotation GENERAL SPECIFICATIONS METRIC ENGLISH X, Y Axis Travel... 370 mm x 270 mm... 14.56" x 10.63" Z Axis Travel... 220 mm... 8.66"

More information

YCM NH450A MAIN FEATURES

YCM NH450A MAIN FEATURES YCM NH450A MAIN FEATURES POWERFUL 15,000 RPM 30HP (BIG-PLUS SPINDLE) BBT-40 TAPER SPINDLE DELIVERS 148FT/LBS [200NM] OF TORQUE, WITH 430PSI THROUGH SPINDLE COOLANT SYSTEM MICRO OIL-AIR LUBRICATION FOR

More information

MTAB. MACHINING CENTERS

MTAB.   MACHINING CENTERS MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,

More information

AP1L AP3L. Nano&Solution. Linear Motor Drive High Precision Die Sinking EDM. Picture shows non-ce machine

AP1L AP3L. Nano&Solution. Linear Motor Drive High Precision Die Sinking EDM. Picture shows non-ce machine Picture shows non-ce machine AP1L AP3L Linear Motor Drive High Precision Die Sinking EDM Nano&Solution The World's First 10-Year Positioning Accuracy Guarantee Utilising the linear motor drive system,

More information

DUGARD. HMCs. DUGARD Machine DUGARD. H3XP / H5XP / SH500 Dugard Horizontal Machining Centres. Machine Tools That Create Solutions Since 1939.

DUGARD. HMCs. DUGARD Machine DUGARD. H3XP / H5XP / SH500 Dugard Horizontal Machining Centres. Machine Tools That Create Solutions Since 1939. DUGARD Machine Tools That Create Solutions Since 1939 DUGARD HMCs H3XP / H5XP / SH500 Dugard Horizontal Machining Centres Maximise loading capacity, minimise floor space DUGARD Machine Tools www.dugard.com

More information

Copyright EXTRON All rights reserved E-M-EN EXTRONCNC.com

Copyright EXTRON All rights reserved E-M-EN EXTRONCNC.com YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN

More information

SERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling

SERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012

More information

V E R T I C A L MACHINING CENTERS

V E R T I C A L MACHINING CENTERS MC machinery systems, inc. A subsidiary of mitsubishi corporation Edm laser waterjet milling high-speed Vmc PrEss brake AutomAtioN consumables PrE-owNEd service FiNANciNG V E R T I C A L MACHINING CENTERS

More information

EM-2033L CNC VERTICAL MACHINING CENTER

EM-2033L CNC VERTICAL MACHINING CENTER Page 1 of 11 Quote No. 021315-5 EM-2033L EM-2033L CNC VERTICAL MACHINING CENTER Page 2 of 11 Quote No. 021315-5 EM-2033L CHEVALIER s EM series VMCs are designed for high precision, productivity, and high

More information

CNC Tool Room Milling Center MODEL: VM-760

CNC Tool Room Milling Center MODEL: VM-760 CNC Tool Room Milling Center MODEL: VM-760 MACHINE FEATURES 7.5HP high torque spindle motor, low noise and vibration BT40/CAT40/DIN40 6000 rpm spindle speed, ( Optional 8,000, 10,00, 12,000 or 15,000rpm

More information

id Series offers performance without the fuss!

id Series offers performance without the fuss! id SERIES WIRE EDM FANUC FANUC i D Series Wire EDM machines have been completely re-engineered from the ground up for superior cutting speed and accuracy, surface finishes, economy of operation and ease

More information

Moving Cross-Rail Double Columns Machining Center

Moving Cross-Rail Double Columns Machining Center Quality, Credibility, Innovation, Service Moving Cross-Rail Double Columns Machining Center 5 Face milling head 5 Axis Simultaneous milling head ( 000~000mm ) 5A head machining TEL : +886-4-565-98 FAX

More information

Vertical Machining Centers

Vertical Machining Centers Vertical Machining Centers Offering a Full Line of Vertical Machining Centers About Morrison Machine Tool Group The Morrison Machine Tool Group is dedicated to the success of our Manufacturing Customers

More information

MSeries. High Rigidity Vertical Machining Centers

MSeries. High Rigidity Vertical Machining Centers MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

GENERAL SPECIFICATION

GENERAL SPECIFICATION GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)

More information

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER

FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches

More information

Product Catalog. EDM Performance Accessories Fax. LOCATIONS NATIONWIDE To order Call

Product Catalog.   EDM Performance Accessories Fax. LOCATIONS NATIONWIDE To order Call Product Catalog SINCE 1989 EDM Performance Accessories LOCATIONS NATIONWIDE To order Call West Coast 800-336-2946 800-511-5532 562-694-6228 Fax Midwest/East Coast 562-694-6228 Fax Table of Contents TABLE

More information

VictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel

VictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel R VictorTaichung Art of Smooth Performance Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel Victor Taichung an established ISO 91 & 141 company Smooth

More information

we cut faster Vertical Machining Center MV204II series

we cut faster Vertical Machining Center MV204II series we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

HIT-400 / 400L / 360D. High Rigid Tapping & Drilling Center

HIT-400 / 400L / 360D. High Rigid Tapping & Drilling Center HIT-400 / 400L / 360D High Rigid Tapping & Drilling Center 2 HWACHEON CATALOG 1 Auto Mobile Transmission Cover High-speed Tapping Center : HIT series 3 PRODUCTIVE RIGID TAPPING & DRILLING CENTER Tapping

More information

DUGARD. DUGARD Machine. Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre. Machine Tools That Create Solutions Since 1939.

DUGARD. DUGARD Machine. Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre. Machine Tools That Create Solutions Since 1939. DUGARD Machine Tools That Create Solutions Since 1939 Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Model V20/5 is a

More information

QP-L Series. High Speed Vertical Machining Center QP1620-L 2033-L 2040-L QP2440-L 2560-L

QP-L Series. High Speed Vertical Machining Center QP1620-L 2033-L 2040-L QP2440-L 2560-L QP-L Series High Speed Vertical Machining Center QP16-L 33-L 40-L QP2440-L 2560-L QP-L Series High-Speed Vertical Machining Center Engineered for Precision, High Accuracy and Efficiency. Machine Features

More information

High Productivity Vertical Machining Center

High Productivity Vertical Machining Center High Productivity Vertical Machining Center VC 430 / VC 510 is designed for high-speed and superior precision machining in a production environment. VC430/ VC510's powerful drives, heavy cutting, column-moving,

More information

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001 SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191

More information

JTEKT Toyoda Americas Corporation

JTEKT Toyoda Americas Corporation JTEKT Toyoda Americas Corporation 316 W. University Drive, Arlington Heights, IL 60004 Toll Free: 800-257-2985 Main: 847-253-0340 Fax: 847-253-0540 www.toyoda.com JTEKT Toyoda Americas Corporation Designed

More information

MV Series. Wire-cut EDM Systems. Debut! Series

MV Series. Wire-cut EDM Systems. Debut! Series Wire-cut EDM Systems MV Series Series Debut! New generation makes it's mark in a continuously updated lineage. 1972 DWC50S-LT1 DWC50H-DNC2 FX10 PX05 FX20K DWC100H-CNC2 QA20 DWC90PA RA90AT 1980 DWC90-CNC1

More information

VMC series. Vertical Machining Center. Standard Features. Optional Features

VMC series. Vertical Machining Center. Standard Features. Optional Features Standard Features CNC control Z axis with upgraded motor & built-in brake High speed precision spindle at rpm For ISO, 6rpm for ISO Rigid tapping function Arm type ATC Box sliding way for axes Telescopic

More information

structure and components

structure and components HSP 643 WAVE structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic

More information

Large Capacity Linear Motor Driven CNC Wire EDM AQ750L AQ750LH AQ900L AQ1200L. create your future

Large Capacity Linear Motor Driven CNC Wire EDM AQ750L AQ750LH AQ900L AQ1200L. create your future Large Capacity Linear Motor Driven CNC Wire EDM AQ750L AQ750LH AQ900L AQ1200L create your future Standard Features - Ensure Continuous and Unattended Production The design of the machine compliments the

More information

PERFORMANCE : VALUE PRODUCT CATALOG

PERFORMANCE : VALUE PRODUCT CATALOG PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools

More information

High Speed and High Precision AI Wire-cut Electric Discharge Machine

High Speed and High Precision AI Wire-cut Electric Discharge Machine High Speed and High Precision AI Wire-cut Electric Discharge Machine State-of-the-art wire EDM, exhibiting the comprehensive strength of FANUC High-performance CNC coupled with digital servo technology

More information

BNA42MSY Fixed Headstock Type CNC Automatic Lathe

BNA42MSY Fixed Headstock Type CNC Automatic Lathe BNA42MSY Fixed Headstock Type CNC Automatic Lathe 2 BNA-42MSY Citizen MSY With two spindles, the subspindle having an additional X axis, a Y axis turret and the latest Mitsubishi control, the BNA-42MSY

More information

Wherever you are there is a qualified service engineer available to meet your service needs.

Wherever you are there is a qualified service engineer available to meet your service needs. Amera-Seiki service is begins with its nationwide chain of dealers, factory trained and well educated in its machine tools. As well, Amera Seiki fields a full complement of factory direct engineers covering

More information

GTZ-2000 SERIES. Multi-tasking Turning Centers

GTZ-2000 SERIES. Multi-tasking Turning Centers GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining

More information

CNC Double Column Machining Center. SDV-H Series SDV Series.

CNC Double Column Machining Center. SDV-H Series SDV Series. CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear

More information

GTX Multi-tasking Turning Centers SERIES

GTX Multi-tasking Turning Centers SERIES GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining

More information

GTZ SERIES. Multi-tasking Turning Centers

GTZ SERIES. Multi-tasking Turning Centers GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements

More information

GMS SERIES Tool Spindle Type 5-axis Turning Centers

GMS SERIES Tool Spindle Type 5-axis Turning Centers GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide

More information

VERTICAL KNEE MILLS. MACHINERY & TOOLS CO South Ave. *Toledo, OH / *fax 419/

VERTICAL KNEE MILLS. MACHINERY & TOOLS CO South Ave. *Toledo, OH / *fax 419/ VERTICAL KNEE MILLS MACHINERY & TOOLS CO. 4545 South Ave. *Toledo, OH 43615 419/537-1717 *fax 419/537-1719 Email:sales@willismachinery.com www.willismachinery.com WM3VS AND 1050 MILLING MACHINES 3HP spindle

More information

LSeries. High Speed Vertical Machining Center

LSeries. High Speed Vertical Machining Center LSeries High Speed Vertical Machining Center L Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.

More information

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES: SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact

More information

Centerless Grinders. ECG series

Centerless Grinders. ECG series Centerless Grinders ECG series COMPANY PROFILE GRINDING APPLICATIONS e-tech Machinery is a world class machine tool builder that strives to produce and service various kinds of grinding machines, with

More information

PROFIMAT MT. Profile grinding with increased profitability. More than Precision

PROFIMAT MT. Profile grinding with increased profitability. More than Precision PROFIMAT MT Profile grinding with increased profitability More than Precision PROFIMAT MT Universal state of the art grinding technology for profile grinding applications The multi-talent in profile grinding

More information

VERTICAL MACHINING CENTER

VERTICAL MACHINING CENTER VERTICAL MACHINING CENTER Vertical Machining Center Rigid Construction for Heavy Duty Cutting Capability High-power and heavy duty cutting main spindle (4,500rpm/8,000rpm) 4 ways, 8 surfaces restraint

More information

MULTITURRET BAR TURNING B436Y2

MULTITURRET BAR TURNING B436Y2 MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model

More information

JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders

JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders GRINDING JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders www.jonesshipman.com Touchscreen controlled Easy or full CNC cylindrical grinding machines ULTRAM

More information

U1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE

U1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm

More information

GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER

GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER PARALLEL TWIN-SPINDLE CNC TURNING CENTER With leading technology and high quality components, the GTH series is particularly developed for automobile

More information

BT50 AWEA MECHANTRONIC CO., LTD.

BT50 AWEA MECHANTRONIC CO., LTD. Dimensions Table Dimensions Boring Concentricity 0.025 mm / 1,500 mm 700 700 1,600 A 0.025 1500 0.030 A 1,800 T T-slot 型槽尺寸圖 Dimensions A 100 7x @ 200 = 1,400 "A" 45 22 H9 16 + 2 16 37+3 1.5 Tool Shank

More information

Southwestern Industries, Inc. TRAK TRL 2460SX Lathe with the ProtoTRAK SLX CNC. TRAK TRL 2460SX Machine Specifications

Southwestern Industries, Inc. TRAK TRL 2460SX Lathe with the ProtoTRAK SLX CNC. TRAK TRL 2460SX Machine Specifications Southwestern Industries, Inc. TRAK TRL 2460SX Lathe with the ProtoTRAK SLX CNC TRAK TRL 2460SX Machine Specifications Height of Centers- 12 Distance between centers- 60 Swing over bed 24 Swing over saddle

More information

AWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001

AWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE

More information

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE

More information

Charmilles - Consumable & Wear Parts

Charmilles - Consumable & Wear Parts Charmilles-1/9 C003 106462 106.462 Current supply upper & lower OD9.5 x id3.8 mm x 3.0 mm EF-320/330/630/930 249246 249.246 Oil filter cartridge for Erosion EDM Layer type Roboform series C002 806549 806.549

More information

The leader of CNC-technology and services worldwide

The leader of CNC-technology and services worldwide Line UP The leader of CNC-technology and services worldwide Introduction MOTEC also offers all kinds of industrial services including the distribution of spare parts, consultation for engineering applications

More information

Teile- und Preisliste Charmilles

Teile- und Preisliste Charmilles Teile- und Preisliste Charmilles bes Funkenerosion GmbH Hafnerweg 3 D 78737 Fluorn-Winzeln Tel.: 07402/9309-17 H. Stängel Fax.: 07402/9309-20 E-mail: rainer.staengel@bes-edm.de Drahtführungen C102/25 100430586

More information

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,

More information

MB SERIES High Precision Horizontal Boring Mills

MB SERIES High Precision Horizontal Boring Mills MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com

More information

PERFORMANCE : VALUE V M P S E R I E S

PERFORMANCE : VALUE V M P S E R I E S PERFORMANCE : VALUE by VMP SERIES PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools that has been recognized for its excellent specifications

More information

KF5600. HYUNDAI WIA Vertical Machining Center

KF5600. HYUNDAI WIA Vertical Machining Center HYUNDAI WIA Vertical Machining Center Technical Leader The Vertical Machining Center, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining

More information

HMC SERIES HORIZONTAL MACHINING CENTER KAO FONG MACHINERY CO., LTD. Since 1968

HMC SERIES HORIZONTAL MACHINING CENTER KAO FONG MACHINERY CO., LTD. Since 1968 HMC SERIES HORIZONTAL MACHINING CENTER KAO FONG MACHINERY CO., LTD. Since 1968 HMC SERIES HORIZONTAL MACHINING CENTER HMC-500 Axes travel (X,Y,Z) Maximum pallet load Spindle nose 720 x 650 x 650 mm 800

More information

Edm laser waterjet milling high-speed Vmc PrESS brake AutomAtioN consumables PrE-owNEd SErVicE FiNANciNG F R O M M I T S U B I S H I L A S E R

Edm laser waterjet milling high-speed Vmc PrESS brake AutomAtioN consumables PrE-owNEd SErVicE FiNANciNG F R O M M I T S U B I S H I L A S E R MC machinery SYStEmS, inc. A Subsidiary of mitsubishi corporation Edm laser waterjet milling high-speed Vmc PrESS brake AutomAtioN consumables PrE-owNEd SErVicE FiNANciNG F R O M M I T S U B I S H I L

More information

High Rigid CNC Lathe

High Rigid CNC Lathe High Rigid CNC Lathe Machine specifications Machine specifications Capacity pindle Turret Feed Tail stock Coolant ETC. Items wing over bed Max. turning dia td. turning dia Max. turning length Chuck size

More information

EM2040L High-Speed CNC Vertical Machining Center

EM2040L High-Speed CNC Vertical Machining Center Page 1 of 8 8-180063 EM2040L High-Speed CNC Vertical Machining Center MACHINE FEATURES CHEVALIER s EM series VMCs are designed for high precision, productivity, and high speed machining in different industries,

More information

High Performance Vertical Turning Center

High Performance Vertical Turning Center High Performance Vertical Turning Center The vertical turning center is designed for long term accuracy, heavy duty cutting and to minimize floor space. Its powerful spindle drives, meehanite casting and

More information

MILLING Bridgeport GX 300 Machining Center

MILLING Bridgeport GX 300 Machining Center MILLING Bridgeport GX 300 Machining Center Quotation to: Quotation Number: Contact: Address: ABMNameAlpha SOHDocumentOrderInvoice Contact Name ShipToAddressLine1 ShipToAddressLine4 ShipToCity1, ShipToState,

More information

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models

MILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523

More information

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with

More information

SL 2500/3000 series CNC TURNING CENTER

SL 2500/3000 series CNC TURNING CENTER 본사및공장 SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea Tel +82 55 3 4800 Fax +82 55 3 47 http://www.esmec.com Design and specifications subject to change without notice.

More information

ZNC drilling EDM OPERATION MANUAL EDZNCOMV08UK

ZNC drilling EDM OPERATION MANUAL EDZNCOMV08UK OPERATION MANUAL ZNC drilling EDM Unit 3, Hollingdon Depot, Stewkley Road, Soulbury, Nr. Leighton Buzzard, Beds., LU7 0DF. England. Telephone +44 (01525) 270261 Fax +44 (01525) 270235 E-Mail sales@anotronic.com

More information

Double Column Vertical Machining Centers

Double Column Vertical Machining Centers Double Column Vertical Machining Centers Double Column Vertical Machining Centers www.toyoda.com Your local distributor is: Corporate Headquarters 316 West University Drive Arlington Heights, IL 60004

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

Vturn-NP16. VictorTaichung. New & Narrow Lathe with High Performance. Art of recision & erformance

Vturn-NP16. VictorTaichung. New & Narrow Lathe with High Performance. Art of recision & erformance R VictorTaichung Art of recision & erformance Vturn-NP6 New & Narrow Lathe with High Performance Machine width.5 meters Turning length 50 mm Rapid feeds 30/30 m/min Roller guideways Servo turret One-piece

More information

PUNCH PRESS. ermaksan.com.tr

PUNCH PRESS. ermaksan.com.tr PUNCH PRESS ermaksan.com.tr PUNCH PRESS PUNCH PRESSES CNC SERVO & ELECTRIC TURRET PUNCH PRESS ETP-S Faster, More Precise, More Environment Friendly... 4 Servo-Electric punching system 20 tons and 0 tons

More information

VMC-7833B Quotation

VMC-7833B Quotation VMC-7833B Quotation HIGH PEFORMANCE VERTICAL MACHINING CENTER MACHINE FEATURES: Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and

More information

PL 250V(VM) VERTICAL TURNING CENTER

PL 250V(VM) VERTICAL TURNING CENTER VERTICAL TURNING CENTER MACHINE CNSTRUCTIN / FEATURES BED The main spindle body of PL250V is consisted of one piece meehanite cast Iron bed, wide column, anti heat displacement spindle and head stock.

More information

CNC Ultra High Precision. UHP-Turn 450. High precision spindle precision of = <0.8 µm

CNC Ultra High Precision. UHP-Turn 450. High precision spindle precision of = <0.8 µm CNC Ultra High Precision UHP-Turn 45 High precision spindle precision of =

More information

GTS SERIES. Twin Spindles & Turrets CNC Turning Centers

GTS SERIES. Twin Spindles & Turrets CNC Turning Centers GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous

More information

5-Axis & 5-Face High Speed Machining Center

5-Axis & 5-Face High Speed Machining Center TM TM 5-Axis & 5-Face High Speed Machining Center BUFFALO MACHINERY CO., LTD. 5, Lane 31, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: -4-37

More information

[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer

[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer [ E[M]CONOMY] means: Standing up to any challenge. FAMUP MC and MCP Vertical CNC machining centers with and without pallet changer MC 120-60 and MC 75-50 The EMCO FAMUP MC series. One of the most advanced

More information

Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2

Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2 TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

Copyright EXTRON All rights reserved E-EH-EN EXTRONCNC.com

Copyright EXTRON All rights reserved E-EH-EN EXTRONCNC.com YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN

More information

Vertical Machining Center. Vertical Machining Center.

Vertical Machining Center. Vertical Machining Center. Vertical Machining Center www.toyoda.com Corporate Headquarters 316 W. University Drive Arlington Heights, IL 60004 Tel: (847) 253-0340 Fax: (847) 253-0540 E-mail: info@toyoda.com Toyoda Northeast Tech

More information

Trust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.

Trust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. Trust And Reliability Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. V33/V43 FEED SYSTEM Heavy duty linear ways are imported from Germany, which are well balanced,

More information

AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001

AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK

More information