H60 Series Clutch Type, Ratchet Wrenches

Size: px
Start display at page:

Download "H60 Series Clutch Type, Ratchet Wrenches"

Transcription

1 Parts Manual Ersatzteil Liste PL17-60NDR H60 Series Clutch Type, Ratchet Wrenches Model Number Free Maximum Maximum Speed Torque Socket Size Length Weight RPM ft. lbs. Nm in. mm in mm lbs. kg 60NDR092HD / NDR092HD / NDR092HD / NDR092HD / NDR092HD / For additional product information visit our website at CooperTools P.O. Box 1410 Lexington, SC

2 60 Series Ratchet Wrench Handle Assembly Page 2

3 Index Best Nr. Reference Núm. Pleza Service Repair Parts for 60 Series Handle Assembly GB D F Description Benennung Designation Descripcíon PL17-60NDR E # Inlet Fitting Einlaßpaßstück Monture d entrée Accesorio de entrada Sleeve Hülse Manchon Manguito O Ring O-Ring Anneau "O" Anillo O" 4 A23593 Screen Assembly Spring Druckfeder Ressort Resorte Throttle Sleeve Valve Seat Ventilsitz Siège de soupape Asiento de la válvula O Ring O-Ring Anneau "O" Anillo O" Motor Housing Motorgehäuse Cage de moteur Caja del motor 10 B139T Screw (2) Gewindestift Vis Tornillo Lever Hebel Levier Palanca Valve Stem Ventilstößel 13 RP103P Pin (2) Stift Goujon Pasador Page 3

4 60 Series Ratchet Wrench Motor Assembly Page 4

5 Index Best Nr. Reference Núm. Pleza Service Repair Parts for 60 Series Ratchet Wrench Motor Assembly GB D F Description Benennung Designation Descripcíon PL17-60NDR E # Cap Kappe Chapeau Tapa O Ring O-Ring Anneau "O" Anillo O" Upper End Plate Oberer Plaque d extrémité Placa de extremo Abschlußdeckel supérieure superior Rotor Rotor Rotor Rotor Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Bearing Lager Coussinet Cojinete Rotor Blade (5) Rotorblatt Pale de rotor Alabe del rotor 8 RP5119 Pin (2) Stift Goujon Pasador Cylinder Zylinder Cylindre Cilindro Bearing Lager Coussinet Cojinete Lower End Plate Unterer Plaque d extrémité Placa de extremo Abschlußdeckel inférieure inferior 12 RPS106 Pin Stift Goujon Pasador Thrust Washer (2) Druckscheibe Rondelle de butée Arandela de empuje Stack-Up Nut Gewindemutter Ecrou d empilement Tuerca de escalonamiento Bearing Lager Coussinet Cojinete Upper Clutch Block O Ring O-Ring Anneau "O" Anillo O" Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Page 5

6 60 Series Ratchet Wrench Torque Control Air Shut-Off Assembly Page 6

7 Index Best Nr. Reference Núm. Pleza Service Repair Parts for 60 Series Ratchet Wrench Torque Control Air Shut-Off Assembly GB D F Description Benennung Designation Descripcíon PL17-60NDR E # Lower Clutch Box Thrust Race Drucklager Butée à billes Canal de empuje Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Thrust Washer (3) Druckscheibe Rondelle de butée Arandela de empuje Thrust Bearing (2) Drucklager Palier de butée Cojinete de empuje 6 9D1617 Ball (12) Kugel Bille Balín Spindle Gear Spindelgetriebe Engrenage de broche Engranaje de husillo Spring Druckfeder Ressort Resorte Thrust Washer Druckscheibe Rondelle de butée Arandela de empuje 10 DP125 Pin (2) Stift Goujon Pasador 11 RP101Z Pin Stift Goujon Pasador Housing Gehäuse Cage Caja Ball (4) Kugel Bille Balín Spring (4) Druckfeder Ressort Resorte 15 B102A Screw (4) Gewindestift Vis Tornillo Bearing Lager Coussinet Cojinete Needle Bearing Nadellager Roulement à aiguilles Cojinete de agujas Ball Race Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Clutch Housing Cap Adapter Nut Torque Nut 23 RP101G Pin Stift Goujon Pasador Pawl Spring Druckfeder Ressort Resorte Page 7

8 60 Series Ratchet Wrench Gearing Page 8

9 Index Best Nr. Reference Núm. Pleza Service Repair Parts for 60 Series Ratchet Wrench Gearing GB D F Description Benennung Designation Descripcíon PL17-60NDR E # Bearing Lager Coussinet Cojinete Thrust Washer Druckscheibe Rondelle de butée Arandela de empuje Idler Pin (3) Zwischenradbolzen Broche pour Piñon loco roue intermédiaire Upper Idler Gear (3) Oberes Roue intermédiaire Engranaje secundario Zwischenzahnrad supérieure superior Upper Gear Cage Short Spindle Gear Ritzel Engrenage de Engranaje de husillo corto broche court Idler Pin (3) Zwischenradbolzen Broche pour Piñon loco roue intermédiaire Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Lower idler Gear (3) Unteres Engrenage Engranaje Zwischenzahnrad secondaire inférieur secundario inferior Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Bearing Lager Coussinet Cojinete Muffler Auspufftopf Gear Cage Planetenradträger Cage d engrenage Jaula de engranajes Nut Mutter Ecrou Tuerca O Ring (2) O-Ring Anneau "O" Anillo O" Retaining Ring Sicherungsring Anneau de fixation Anillo de retención Slip-On Gear Steckritzel Engrenage glissant Engranaje de deslizamiento Key Schlüssel Clé Llave Lower Gear Cage Thrust Washer (2) Druckscheibe Rondelle de butée Arandela de empuje 21 B151P Shoulder Screw Schulterschraube Vis à épaulement Tornill de resalto 22 B110D Screw Gewindestift Vis Tornillo 23 3/4 Hex Reaction Bar Collar O Ring O-Ring Anneau "O" Anillo O" Bearing Lager Coussinet Cojinete Cam Nocken Came Leva Page 9

10 REPAIR INSTRUCTIONS: Motor repair and disassembly is accomplished in the following manner (refer to parts list page): Retain motor housing in smooth-jawed vise by clamping on motor housing flats. CAUTION: Do not over-tighten vise. Remove gear lock nut using a box chain or wench (right hand thread). CAUTION: Care should be taken when removing gear case from motor housing since planetary gearing is not retained in the gear case. Refer to Disassembly Of Torque Control Air Shut-Off With motor assembly in vertical position, remove stack up nut (right hand thread) using a wrench. On reversible units remove o-ring, reverse actuating ring, and threaded pin. Remove motor package from housing. Disassemble motor package by removing retaining rings from both ends of the rotor. Remove gearing from gear cage.on some double geared tools it will be necessary to remove the thrust washer and at least one idler gear pin from the lower gear stage to provide clearance for the lower gear stage to pass through the upper ring gear. CAUTION: Hold housing in vertical position with handle up to prevent loss of ball. Use extreme care not to bend valve stem when removing pilot valve assembly from handle. In BB model tools, the bleed adjustment screw can be removed for cleaning. DISASSEMBLY OF TORQUE CONTROL AIR SHUT- OFF ASSEMBLY: To disassemble the torque control air shut-off assembly use the following procedure: Hold motor housing by flats in a smooth-jawed vise. CAUTION: Do not over-tighten vise. Using a spanner wrench, turn adapter nut counterclockwise(right hand thread). Continue to un-thread adapter nut until free from motor housing. After cleaning and replacing worn parts, coat parts with a light film of Gardner-Denver oil. If needle bearings or roller bearings have been washed, a thin coat of Gardner-Denver grease should be applied to the rollers or balls. o-rings should be coated with a light film of Parker O-Ring Lube Remove lower clutch block assembly race, and thrust bearing. Remove four screws. Clutch housing cap and adapter nut are then loose. Turn adjusting ring so that arrow on O.D. registers with pawl slot in clutch housing. remove adjustment ring. CAUTION: care should be taken not to lose springs and balls held captive under adjustment ring and pawl. The removal of the adjustment ring will release ball race from clutch housing. Spring and washer can then be removed. Remove retaining ring from inside lower clutch block and remove output from gear spindle. CAUTION: When output gear spindle is removed from lower clutch block, twelve balls will drop out. Remove retaining ring from O.D. of lower clutch block and remove thrust bearing and thrust race. Page

11 ASSEMBLY INSTRUCTIONS: To reassemble basic tool, use the following instructions: Reassemble motor package, including retaining rings and insert into motor housing. Add stack-up nut, using wrench to tighten down. Check motor manually to determine that the motor is free to turn. CAUTION: This motor is designed in such a manner that back pressure from the exhaust system is used to balance axial forces on the rotor. If the motor is run above 30psig. without any portion of the exhaust system, the lower end of the rotor and the lower end plate will suffer excessive wear. Reassemble gearing. Holding gear case vertically, place idler gears and idler gear pins in gear cage and and insert into gear case. CAUTION: Maintain gear assembly in the vertical position until assembly to motor unit has been completed. When the upper stage of gearing in a double geared tool includes a slip-on sun gear, it will be necessary to use alignment gage when placing the upper stage of gearing in the gear case. NOTE: On some double geared tools it will be necessary to leave out one idler gear pin in the lower stage until it has been positioned in the lower ring gear. Slide upper lock nut over the O.D. of the gear case and thread onto the motor handle assembly, using a box or a chain wrench. Tighten to 75 ft.-lbs. minimum. AIR SHUT-OFF TORQUE CONTROL AIR SHUT-OFF CLUTCH: Slide retaining ring over end of output spindle having three grooves and place against shoulder on output spindle. Replace balls in grooves of output spindle (4 per groove). By placing small amount Gardner-Denver grease in each groove, the balls can easily be kept in proper position. Insert output spindle with balls into lower clutch block and assemble retaining ring. To O.D. of lower clutch block, add thrust bearing, thrust race, and retaining ring. NOTE: Thrust race includes o-ring. To lower clutch block assembly add thrust race, thrust bearing, and thrust race in the order indicated. Place washer, spring, and lower clutch block assembly in clutch housing in the order indicated. CAUTION: Small diameter of spring must bear against thrust race of lower clutch block assembly. Insert balls and adjustment springs into bushings of clutch housing. Place spring under pawl. Depress lower clutch block assembly as far as possible, compress two opposite adjustment springs, and release lower clutch block assembly. Maintaining compressive loading on adjustment springs, slide adjustment ring over clutch housing and adjustment springs so that index arrow registers with pawl slot. Depress pawl and rotate adjustment ring to the maximum setting. Slip clutch housing cap through adapter nut. Insert four screws through clutch housing and tighten to clutch housing cap NOTE: When clutch is assembled to tool, tighten adapter nut to 75 ft.-lbs. minimum. ADJUSTMENT OF AIR SHUT-OFF HANDLE: After complete tool has been assembled, adjust mechanism in the following manner: Adjust line pressure to 60 psig. Page 11

12 Turn adjustment screw clockwise against seat. DO NOT OVER-TIGHTEN. Turn adjustment screw4-1/4 revolutions counterclockwise. Depress trigger button. Screw bleed screw in clockwise, using 1/8 turn increments until the tool continuesto run when started. CAUTION: Further closing of bleed screw may cause shut-off feature to be inoperative and tool may stall. ADJUSTMENT OF TORQUE CONTROL AIR SHUT- OFF CLUTCH: With clutch assembled in the tool, adjustment for desired torque should be done on the job which the tool will be used on, or a test fixture simulating the actual job. Viewing the tool from the handle end, depress pawl and turn adjustment ring clockwise to a point where the arrow on the adjustment ring registers with the pawl slot. Clutch is now adjusted to the minimum setting. Measure output torque applied to test fixture, or to job application and turn adjustment ring counterclockwise until desired torque is obtained. CAUTION: If not properly adjusted for application conditions, tool may stall or fail to start. Page 12

136GLF-2125 Right Angle Grinder

136GLF-2125 Right Angle Grinder Parts Manual Ersatzteil Liste 82067-1 16GLF-2125 Right Angle Grinder For additional product information visit our website at www.cooperpowertools.com N O R T H A M E R I C A Cooper Power Tools P.O. Box

More information

Pistol Grip Screwdriver Models MP2460-C, MP2460-M, MP2461-C, MP2461-M, MP2462-C, MP2462-M (Type 4) Reversible

Pistol Grip Screwdriver Models MP2460-C, MP2460-M, MP2461-C, MP2461-M, MP2462-C, MP2462-M (Type 4) Reversible Parts Manual Ersatzteil Liste Pistol Grip Screwdriver Models MP2460-C, MP2460-M, MP2461-C, MP2461-M, MP2462-C, MP2462-M (Type 4) Reversible Model Number 1/4" Hex Quick Change Chuck Wood (in oak) Fastener

More information

10K27..,10L27.., 15K27.., & 15L27.. Series Pneumatic Right Angle Buffers & Drills

10K27..,10L27.., 15K27.., & 15L27.. Series Pneumatic Right Angle Buffers & Drills Parts Manual Ersatzteil Liste PL-30-1027-3 10K27..,10L27.., 15K27.., & 15L27.. Series 45-8027 Throttle Type Free Speed (RPM) Terminations Grinders/Sanders Grinders/Sanders 850 1,250 1,500 1,800 2,200 200

More information

64TT Series Pistol Grip Stall Bar Nutrunners

64TT Series Pistol Grip Stall Bar Nutrunners Parts Manual PL-64TT 04/07/0 64TT Series Pistol Grip Stall Bar Nutrunners For additional product information visit our website at http://www.apextoolgroup.com PL-64TT Cleco A 64TT... D4 Series Assembly

More information

Parts Manual PL /21/ Series Right Angle Grinders, Sanders & Drills

Parts Manual PL /21/ Series Right Angle Grinders, Sanders & Drills Parts Manual 45-8008 PL30-1012 04/21/2011 10-12 Series Right Angle Grinders, Sanders & Drills Throttle Type Free Speed (RPM) Grinders/Sanders Drills Terminations Grinders/Sanders Drills (Chuck) 12,000

More information

Parts Manual Ersatzeil-Liste

Parts Manual Ersatzeil-Liste Parts Manual Ersatzeil-Liste K1 Series Rotary Vane Hoist K1HA Hook Mounted K1TA Trolley Mounted i Table of Contents Motor Assembly... 1 Motor Assembly (parts)... 2 Brake Assembly... 3 Brake Assembly (parts)...

More information

OPERATING INSTRUCTIONS AND SERVICE MANUAL

OPERATING INSTRUCTIONS AND SERVICE MANUAL OPERATING INSTRUCTIONS AND SERVICE MANUAL 55NAL--270-4 55NL--724-4 55RNL-2-LS-4- COMPLETE TOOL MODEL NO. CODE NO. 55NAL--270-4 20270 55NL--724-4 220724 READ SAFETY RECOMMENDATIONS 55RNL-2-LS-4-24089 BEFORE

More information

35 Series Screwdrivers

35 Series Screwdrivers Parts Manual Ersatzteil Liste 35 Series Screwdrivers 35 RS A XX - XX D X Tool Series: Output Square Drive Size 35 3 = 3/8" Square Drive Q = Quick Change Generation D = th Tool Type: Gear Train Designation

More information

Parts Manual PL /25/ Series Inline Extended Grinders

Parts Manual PL /25/ Series Inline Extended Grinders Parts Manual 45-8006 PL30-1011 04/25/2011 10-11 Series Inline Extended Grinders Throttle Type Free Speed (RPM) 3" Extension 5" Extension 28,000 25,000 28,000 25,000 Termination 300 Collet Button 10B1100

More information

Parts Manual. K1CA Series Hoist/Hoistractor Combination Units. PL86-K1CA December 12, Additional Parts Manuals Required: Hoist: PL86-K1

Parts Manual. K1CA Series Hoist/Hoistractor Combination Units. PL86-K1CA December 12, Additional Parts Manuals Required: Hoist: PL86-K1 December 12, 2015 Parts Manual K1CA Series Hoist/Hoistractor Combination Units Additional Parts Manuals Required: Hoist: PL86-K1 Hoistractor: PL86-TRACTOR i December 12, 2015 Table of Contents K1CA Hoist/Hoistractor

More information

17 E S XX XX. Series / Serie 17 Attachment / Kopfstuck. Motor Style / Type D2 = 1/4" Square Drive (Inline models)

17 E S XX XX. Series / Serie 17 Attachment / Kopfstuck. Motor Style / Type D2 = 1/4 Square Drive (Inline models) Parts Manual Ersatzteil Liste PL2-7ES April, 2006 7ES...Series (EN) Electronically Controlled Nutsetters, with brushless dc electric motor, tool memory, resolver, transducer (DE) Elektronisch gesteuerter

More information

Your contact person Mr Tim Snyder. Technical Data

Your contact person Mr Tim Snyder. Technical Data Inclusive adapter DIN M10 30 to connect to felxible shafts Inclusive rebuild set to G 16000 H Powerful machine with centrifugal governor extensions up to 1000 mm Your contact person Mr Tim Snyder 586-776-1480

More information

Parts Manual Ersatzteil Liste

Parts Manual Ersatzteil Liste Parts Manual Ersatzteil Liste P2CA Series Hoist/Hoistractor Combination Units Additional Parts Manuals Required: Hoist: PL86-P2 Hoistractor: PL86-TRACTOR i Table of Contents P2CA Hoist/Hoistractor Combination...

More information

Parts Manual Ersatzteil Liste

Parts Manual Ersatzteil Liste Parts Manual Ersatzteil Liste Hoistractor: Drive Wheel & Drive Sprocket Models used with Hoist/Hoistractor Combination and Low Headroom Units Model Speed Drive Type 513208 Standard Sprocket 513209 High

More information

Parts Manual PL /25/ Series Inline Grinders

Parts Manual PL /25/ Series Inline Grinders Parts Manual 45-8015 PL30-1025-1 04/25/2011 10-25 Series Inline Grinders Throttle Type Free Speed (RPM) Terminations 23,000 18,000 200 Collet 300 Collet Cone & Plug Type 1 Button 10B2580 10B2582-01 -36-77

More information

Parts Manual PL /21/ Series Right Angle Grinders & Sanders

Parts Manual PL /21/ Series Right Angle Grinders & Sanders Parts Manual 45-8025 PL30-1027-1 04/21/2011 10-27 Series Right Angle Grinders & Sanders Throttle Type Free Speed (RPM) Terminations 6,000 9,000 11,000 200 Collet 3/8"-24 Ext. Type 27 (mm) 5/8"-11 Ext.

More information

R4040/R4040S FIGURE A / FIGURA A

R4040/R4040S FIGURE A / FIGURA A R00/R00S FIGURE A / FIGURA A 0 0 0 0 0 0 0 0 R00/R00S FIGURE A KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY 0000 Screw (M)... 0000 Splash Guard... 0000 Outer Blade Guard... 0000

More information

Parts Manual Ersatzteil Liste

Parts Manual Ersatzteil Liste Parts Manual Ersatzteil Liste P3 Series Piston Hoist i Table of Contents Head & Piston Assembly... 1 Head & Piston Assembly (parts)... 2 Motor Assembly... 3 Motor Assembly (parts)... 4 Upper Hook Assembly...

More information

24 Series Tube Nut Wrenches

24 Series Tube Nut Wrenches Parts Manual PL12-24RTA 04/07/2011 24 Series Tube Nut Wrenches For additional product information visit our website at http://www.apextoolgroup.com PL12-24RTA Cleco Motor Assembly A 9 10 11 12 24 Off Aus

More information

17 E S XX XX. Series / Serie 17 Attachment / Kopfstuck (x, xx) - (Select one / eine Auswahl) ZA = 1/4" Square Drive Floating Spindle

17 E S XX XX. Series / Serie 17 Attachment / Kopfstuck (x, xx) - (Select one / eine Auswahl) ZA = 1/4 Square Drive Floating Spindle Parts Manual Ersatzteil Liste PL-7ES-ZA 7ES(..)ZA Series (EN) Electronically Controlled Nutsetters, with brushless dc electric motor, tool memory, resolver, transducer (DE) Elektronisch gesteuerter Elktro-Schrauber,

More information

Maintenance Information

Maintenance Information 16575219 Edition 4 October 2013 Air Screwdrivers QP1P, QP1S and QP1T Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,

More information

Your contact person Mr Tim Snyder. Technical Data

Your contact person Mr Tim Snyder. Technical Data Comfortable use by a safety valve embedded into the hand grip Ideally for internal grinding, deburring of hollow spaces (e.g. motor blocks, tubes, turbine blades) and for finishing welding lines Robust

More information

Parts Manual PL /17/ Series Right Angle Buffers & Drills

Parts Manual PL /17/ Series Right Angle Buffers & Drills Parts Manual 45-8027 PL30-1027-3 05/17/2011 10-27 Series Right Angle Buffers & Drills Free Speed (RPM Terminations Throttle Type Grinders/Sanders Grinders/Sanders 850 1,250 1,500 1,800 2,200 200 Collet

More information

14RAA-2126 Special Screwdriver

14RAA-2126 Special Screwdriver Parts Manual PL12-14RAA-2126 08/09/2011 14RAA-2126 Special Screwdriver Tool Series 14 Tool Style R = Reversible Right Angle A = Trigger Torque Control Mechanism A = Clecomatic 14 R A A - 2126 For additional

More information

Maintenance Information

Maintenance Information 16575243 Edition 2 October 2013 Air Screwdrivers 1R Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these

More information

Maintenance Information

Maintenance Information 16584062 Edition 3 December 2013 High Torque Reversible Angle Screwdrivers and Angle Wrenches QA1L High Torque Series Maintenance Information Save These Instructions Product Safety Information WARNING

More information

Parts Manual Ersatzteil Liste

Parts Manual Ersatzteil Liste Parts Manual Ersatzteil Liste P3 Series Hoist/Hoistractor Low Headroom i Table of Contents Low Headroom Hoist/Hoistractor Combination A... 1 Low Headroom Hoist/Hoistractor Combination A (parts)... 2 Low

More information

18CS Series Current Control Inline Nutrunner

18CS Series Current Control Inline Nutrunner Parts Manual PL2-8CS-PTS 04/0/20 8CS Series Current Control Inline Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2-8CS-PTS Cleco Model Nomenclature A

More information

GARDNER--DENVER 16BL.. Parts Manual Ersatzteil--Liste 16 BL P PL12--16BL

GARDNER--DENVER 16BL.. Parts Manual Ersatzteil--Liste 16 BL P PL12--16BL Parts Manual Ersatzteil--Liste PL2--6BL GARDNER--DENVER 6BL.. GB D F E Electronically Controlled Nutsetters, with brushless dc electric motor, tool memory, angle encoder and transducer Elektronisch gesteuerter

More information

Maintenance Information

Maintenance Information 16606022 Edition 3 May 2014 Air Drill 728 Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially

More information

FIGURE A R

FIGURE A R FIGURE A 8 7 78 7 8 0 9 7 70 7 8 78 78 9 0 8 7 0 9 7 8 8 9 8 7 0 9 7 0 7 0 9 8 9 7 7 7 7 77 R007 PARTS LIST FOR FIGURE A KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY 0800090079 Miter Guide Assembly

More information

Disassembly Instructions hp. Dynafile II Models: 40352, 40353

Disassembly Instructions hp. Dynafile II Models: 40352, 40353 Disassembly Instructions - 0.4 hp. Dynafile II Models: 40352, 40353 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever

More information

14CN Series Rivet Shaver

14CN Series Rivet Shaver Parts Manual 45-8453 04/21/2011 14CN Series Rivet Shaver For additional product information visit our website at http://www.apextoolgroup.com Cleco Nomenclature 45-8453 A 14 C N L 60-95 Tool Classification

More information

12 L * OH**

12 L * OH** Parts Manual Ersatzteil--Liste 12L27.. series 0.9 hp ERGO Short Coupled Low Profile Grinders & Sanders 45--8175 TOOL CLASSIFICATION 12 = ERGO Grinder/Sander 12 L 2 7 12 27 08* OH** -- TYPICAL MODEL THROTTLE

More information

1700 & 1900 Series Vertical Grinders

1700 & 1900 Series Vertical Grinders Parts Manual 82008 0/10/2011 1700 & 1900 Series Vertical Grinders For additional product information visit our website at http://www.apextoolgroup.com Cleco Nomenclature 82008 XX XX B V X - XX Tool Series

More information

18CS Series Current Control Inline Nutrunner. Parts Manual PL12-18CS 04/23/2009

18CS Series Current Control Inline Nutrunner. Parts Manual PL12-18CS 04/23/2009 Parts Manual PL2-8CS 0/23/2009 8CS Series Current Control Inline Nutrunner For additional product information visit our website at http://www.cooperpowertools.com PL2-8CS 0/23/2009 Cleco Model Nomenclature

More information

17 E A 30 F1 XX X X = Standard 1 = Fast Lead

17 E A 30 F1 XX X X = Standard 1 = Fast Lead Parts Manual Ersatzteil Liste 7EA(..)F... Series with Flush Socket (EN) Electronically Controlled Nutsetters, with brushless dc electric motor, tool memory, resolver, transducer (DE) Elektronisch gesteuerter

More information

Maintenance Information

Maintenance Information 16573347 Edition 2 February 2014 Air Grinder Series 88H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these

More information

EDR-210 Engine Drill PARTS CATALOG LISTA DE PIEZAS ECHO, INCORPORATED SERIAL NUMBER NÚMERO DE SERIE

EDR-210 Engine Drill PARTS CATALOG LISTA DE PIEZAS ECHO, INCORPORATED SERIAL NUMBER NÚMERO DE SERIE PARTS CATALOG LISTA DE PIEZAS EDR-210 SERIAL NUMBER NÚMERO DE SERIE E01305001001-E01305999999 E01407001001-E01407999999 ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois 60047 WWW.ECHO-USA.COM

More information

Disassembly Instructions hp. Mini-Dynafile II

Disassembly Instructions hp. Mini-Dynafile II Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the

More information

UOW Series Repair Manual UOW-11 & UOW-T60 Series

UOW Series Repair Manual UOW-11 & UOW-T60 Series UOW Series Repair Manual UOW-11 & UOW-T60 Series 100000 SE Pine St., Portland, OR 97216 800-852-1368 503-254-6600 www.aimco-global.com Contents Page 1. Tools Needed for Repair 2 2. Disassembly and Reassembly

More information

Shindaiwa Illustrated Parts List

Shindaiwa Illustrated Parts List Shindaiwa Illustrated Parts List EPA/CARB Emission- Certification Components This manual provides information on carburetors, fuel systems and components related to EPA/CARB emission certified models ONLY.

More information

Maintenance Information

Maintenance Information Form 16575334 Edition 1 April 2005 Electric Screwdrivers EL, EP and ET 34V DC Series Maintenance Information Save These Instructions WARNING Maintenance procedures have the potential for severe shock hazard

More information

Maintenance Information

Maintenance Information 04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,

More information

Maintenance Information

Maintenance Information 16572679 Edition 2 May 2014 Air Drill QP Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially

More information

12-27 Series Right Angle Saw

12-27 Series Right Angle Saw Parts Manual 45-8183 04/27/2011 12-27 Series Right Angle Saw 12 X 2 7 XX - 01 Tool Series 12 = Ergo Handle Throttle Type L = Locking Lever S = Locking Lever Motor Size 2 = 0.9 Horsepower Handle Style 7

More information

Maintenance Information

Maintenance Information 80234313 Edition 2 May 2014 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the

More information

Maintenance Information

Maintenance Information 45761848 Edition 3 February 2014 Air Die Grinder AC4A, SC4A and XC4A Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,

More information

Maintenance Information

Maintenance Information 16573370 Edition 2 February 2014 Air Grinder 99V Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these

More information

Maintenance Information

Maintenance Information 80234313 Edition 1 June 2006 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing

More information

Disassembly Instructions hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335

Disassembly Instructions hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335 Disassembly Instructions - 0.5 hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply

More information

Illustrated Parts List Lista de Piezas

Illustrated Parts List Lista de Piezas EB Power Blower EB Sopladore de Portátil Illustrated Parts List Lista de Piezas SERIAL NUMBERS / NÚMEROS DE SERIE P0000 - P Accessories for Shindaiwa products can be found at: Los accesorios para los productos

More information

* TOOLBANK * ENSAMBLADORA * JOINER MACHINE * ASSEMBLEUSE * FPPBJ FPPBJL LISTA DE RECAMBIOS / SPARE PARTS LIST / LISTE PIECES DETACHEES VERSION: 9

* TOOLBANK * ENSAMBLADORA * JOINER MACHINE * ASSEMBLEUSE * FPPBJ FPPBJL LISTA DE RECAMBIOS / SPARE PARTS LIST / LISTE PIECES DETACHEES VERSION: 9 * TOOLBNK * ENSMBLDOR * JOINER MCINE * SSEMBLEUSE * FPPBJ FPPBJL LIST DE RECMBIOS / SPRE PRTS LIST / LISTE PIECES DETCEES VERSION: 9 POS CODIGO VERS DENOMINCION DESCRIPTION DENOMINTION 1 13434.8107 Cubierta

More information

SW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner

SW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Parts Manual PL2-029EN Formerly: PC-468-5080 SW00PRY220 (4685080) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Caterpillar # 8T-590 For additional product information visit our website at http://www.apextoolgroup.com

More information

UAN Series Pneumatic Nutrunner Repair Manual

UAN Series Pneumatic Nutrunner Repair Manual UAN Series Pneumatic Nutrunner Repair Manual PO Box 16460, Portland, OR 97292-0460 503-254-6600 Fax 503-255-2615 www.aimco-global.com Contents Page 1. Tools Needed for Repair of UAN Series Pneumatic Nutrunner

More information

12-27 Series Right Angle Sanders

12-27 Series Right Angle Sanders Parts Manual 45-8178 04/21/2011 12-27 Series Right Angle Sanders 12 X 2 7 XX - XX XX OH Product Classification 12 = Ergo Grinder/Sander Trottle Type L = Locking Lever S = Locking Lever Motor Size 2 = 0.9

More information

9. DRIVE AND DRIVEN PULLEYS/ KICK STARTER AGILITY ~6.0kg-m g-m g-m 9-0

9. DRIVE AND DRIVEN PULLEYS/ KICK STARTER AGILITY ~6.0kg-m g-m g-m 9-0 9 5.0~6.0kg-m 3.5-4.5g-m 9 3.5-4.0g-m 9-0 SERVICE INFORMATION...9-1 DRIVE BELT...9-5 TROUBLESHOOTING...9-1 DRIVE PULLEY...9-6 LEFT CRANKCASE COVER...9-2 CLUTCH/DRIVEN PULLEY...9-9...9-2 SERVICE INFORMATION

More information

TC-210 Tiller/Cultivator

TC-210 Tiller/Cultivator Accessories for ECHO products can be found at: Los accesorios para los productos ECHO se pueden encontrar en: www.echo-usa.com/products/catalogs PARTS CATALOG LISTA DE PIEZAS TC-0 Tiller/Cultivator TC-0

More information

C24 CS30EC(S) Serial No.

C24 CS30EC(S) Serial No. C24 CS30EC(S) Serial No. October, 11, 2007 #978-82006-100 (CE25ECS) MPREFMPHIN 001 157-01570-90 668-7468 SPARK PLUG CAP ASS'Y SET PIPA BUJIA 1 002 018-00546-21 668-5767 SPARK PLUG BMR6A BUJIA ENCENDIDO

More information

Shindaiwa Illustrated Parts List

Shindaiwa Illustrated Parts List Shindaiwa Illustrated Parts List T0, C0 Trimmer/Brushcutter CYLINDER, CILENDRO, CYLINDRE... FAN COVER, TAPA, COUVERCLE... CRANKCASE, CARTER, CARTER DE MANIVELLE... PISTON /CLUTCH SHOE, PISTON/EMBRAGUE,

More information

Maintenance Information

Maintenance Information 45530136 Edition 1 July 2008 Electric Screwdrivers EL 24V DC Series Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing maintenance on this tool.

More information

Disassembly Instructions hp Dynafile

Disassembly Instructions hp Dynafile Disassembly Instructions - 0.5 hp. 14000 Dynafile Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to dissipate the

More information

Boston Gear LOR Series

Boston Gear LOR Series Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD

More information

3M Overhaul Service Kit

3M Overhaul Service Kit SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 3 in. (77 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20346, 3M Overhaul Service Kit, contains all the replacement parts that naturally wear

More information

Maintenance Information

Maintenance Information 16596199 Edition 2 May 2014 Air Drill 33 Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially

More information

HENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC

HENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.

More information

SERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.

SERVICE PARTS LIST 1-1/8 ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg. 00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.

More information

Maintenance Information

Maintenance Information 16572554 Edition 2 May 2014 Air Drill 44SMA, 44SMA-EU Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially

More information

0.4 hp. Right Angle Tools

0.4 hp. Right Angle Tools 0.4 hp. Right Angle Tools Models: 50210, 50211, 50561, 50570 Lubricants: 95842 Dynabrade Air Lube 10W/NR 95848 Gear Oil Lubricant Gun: 95541 Push-Type Gun 0.4 hp. Right Angle Tools Models: 50210, 50211,

More information

ASSEMBLY. Transmission Automatic Transmission 5R44E and 5R55E. Special Tool(s)

ASSEMBLY. Transmission Automatic Transmission 5R44E and 5R55E. Special Tool(s) 307-01-1 Automatic Transmission 5R44E and 5R55E 307-01-1 ASSEMBLY Transmission Special Tool(s) Holding Fixture, Transmission 307-262 (T93T-77002-AH) Special Tool(s) Installer, Transmission Extension Housing

More information

EDR-260 Engine Drill EDR-260 Taladro Motorizado

EDR-260 Engine Drill EDR-260 Taladro Motorizado Accessories for ECHO products can be found at: Los accesorios para los productos ECHO se pueden encontrar en: www.echo-usa.com/products/catalogs PARTS CATALOG LISTA DE PIEZAS EDR-60 Engine Drill EDR-60

More information

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard)

Output 0.9 H.P. (675 W) 9000 to R.P.M (11000rpm is standard) HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual COLLET SPINDLE SHOWN Model Number Exhaust Direction Throttle Type 44RAE Side (L) Lever or (K) Safety Lever Speed 9000 to 11000

More information

3M Overhaul Service Kit

3M Overhaul Service Kit SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 5 in. (127 mm) and 6 in. (150 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20347, 3M Overhaul Service Kit, contains all the replacement parts

More information

CS-3000 Chain Saw MOTOSIERRA CS-3000

CS-3000 Chain Saw MOTOSIERRA CS-3000 AVAILABLE ACCESSORIES: ACCESORIOS DISPONIBLES CHAIN / CADENA 4" (5cm) VX5X " (40cm) VX5X GUIDE BAR / GUÍA DE BARRA (PRO ) 4" (5cm) 4A0ED5 " (40cm) A0ED5 PARTS CATALOG LISTA DE PIEZAS CS-000 Chain Saw MOTOSIERRA

More information

Transaxle. 1. Mount the transaxle to Bench Mounted Holding Fixture T57L-500-B.

Transaxle. 1. Mount the transaxle to Bench Mounted Holding Fixture T57L-500-B. «1997 Aspire Table of Contents» «Group 07: TRANSAXLE» «Section 07-01: Transaxle, Automatic» «DISASSEMBLY» Transaxle CAUTION: To prevent dirt from entering the transaxle, it should be disassembled and kept

More information

Transmission Overhaul Procedures-Bench Service

Transmission Overhaul Procedures-Bench Service How to Assemble the Lower Reverse Idler Gear Assembly Special Instructions In 1996 Eaton changed the reverse idler system design. In the nut design, the reverse idler bearing was lubricated through a hole

More information

KICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY SERVICE INFORMATION TROUBLESHOOTING KICK STARTER DRIVE BELT...

KICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY SERVICE INFORMATION TROUBLESHOOTING KICK STARTER DRIVE BELT... 8 KICK STARTER/DRIVE PULLEY/ 8 SERVICE INFORMATION... 8-2 TROUBLESHOOTING... 8-2 KICK STARTER... 8-3 DRIVE BELT... 8-7 DRIVE PULLEY... 8-9 STARTER ONE-WAY CLUTCH DRIVE GEAR... 8-11... 8-14 8-0 Torque:

More information

This file is available for free download at

This file is available for free download at This file is available for free download at http://www.iluvmyrx7.com This file is fully text-searchable select Edit and Find and type in what you re looking for. This file is intended more for online viewing

More information

rev 1_ MH-246.4DS

rev 1_ MH-246.4DS rev 1_02-10-15 MH-246.4DS 1 Shaft, Handle, Cutting Attachment 16 9 7 1 8 6 38 11 15 10 3 2 218 4 37 2 1 Shaft, Handle, Cutting Attachment 1 1 660195626 LOOP HANDLE SET POIGNÉE CPL. 1 INC. 6-9,16 1 2 326036-4

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for

More information

4405-RA 4405-R 4405-RA 4405-R S

4405-RA 4405-R 4405-RA 4405-R S ACCESSORIES Page 34 Master Parts Breakdowns Updated Feb. 1st 2006 Master Parts Breakdowns Updated Feb. 1st 2006 Page 35 This tool is designed to operate on 90 psig (6.2 bar) maximum air pressure with 1/4

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

MODELS 44 ARA 44 ARAC 44 RA4 44 RA2

MODELS 44 ARA 44 ARAC 44 RA4 44 RA2 General Safety and Maintenance Manual Model 44ARA Angle Grinder with 4 guard. Model 44ARAC Angle Grinder with built in 1/4 collet for use with carbide burrs. Model 44ARAZ Angle Grinder with spiral cool

More information

Illustrated Parts List Lista de Piezas

Illustrated Parts List Lista de Piezas Illustrated Parts List Lista de Piezas PS PowerBroom PS Barredora SERIAL NUMBERS / NÚMEROS DE SERIE T0000 - T Accessories for Shindaiwa products can be found at: Los accesorios para los productos Shindaiwa

More information

AUTOMATIC TRANSMISSIONS Mitsubishi F3A20 Series TRANSMISSION APPLICATION TABLE

AUTOMATIC TRANSMISSIONS Mitsubishi F3A20 Series TRANSMISSION APPLICATION TABLE Article Text ARTICLE BEGINNING AUTOMATIC TRANSMISSIONS Mitsubishi F3A20 Series APPLICATION TRANSMISSION APPLICATION TABLE Vehicle Application Transmission Model Colt 3-Speed (1990-94)... F3A21 Colt Vista

More information

Transfer Valve Actuator Overhaul Instructions

Transfer Valve Actuator Overhaul Instructions Rotary Style Transfer Valve Actuators Overhaul Instructions Form No. F-1031 Section 2315 Issue Date 12/10/99 Rev. Date 11/02/11 Table of Contents Introduction.................................. 1 Safety

More information

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring

More information

LOR Series Trig-O-Matic Lite Overload Release Clutch

LOR Series Trig-O-Matic Lite Overload Release Clutch LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...

More information

Epic Enterprises, Inc.

Epic Enterprises, Inc. 1.TIF R SPINDLE POSTERS (ASSEMBLED VIEW) CARTELES Del HUSO De R (VISIÓN MONTADA) -01 (151965A) EE302940 Axle, R Spindle Eje de Huso "R" -01A (151965A) EE302940-1 Axle, R Spindle, Hardened Spline Eje de

More information

Illustrated Parts List Lista de Piezas

Illustrated Parts List Lista de Piezas Illustrated Parts List Lista de Piezas T Trimmer T Podadora SERIAL NUMBERS / NÚMEROS DE SERIE T0000 - T Accessories for Shindaiwa products can be found at: Los accesorios para los productos Shindaiwa se

More information

SRM-3605U Brushcutter DESMALEZADORA

SRM-3605U Brushcutter DESMALEZADORA PARTS CATALOG LISTA DE PIEZAS SRM-0U Brushcutter DESMALEZADORA cc SERIAL NUMBER NÚMERO DE SERIE S/N: 0000-0 ECHO, INCORPORATED 00 Oakwood Road Lake Zurich, Illinois 00 WWW.ECHO-USA.COM P/N 0 0 ECHO, Incorporated.

More information

2005 Toyota RAV AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul

2005 Toyota RAV AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul 2001-05 AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul APPLICATION CAUTION: Flush oil cooler and oil cooler lines prior to transaxle installation. Oil cooling system contamination may cause premature transaxle

More information

Illustrated Parts List Nomenclature des Pièces

Illustrated Parts List Nomenclature des Pièces EBRT Backpack Blower EBRT Souffleur à dos Illustrated Parts List Nomenclature des Pièces SERIAL NUMBERS / NUMÉROS DE SÉRIE P0000 - P ENGINE... MOTEUR ENGINE... MOTEUR CARBURETOR... CARBURATEUR CARBURETOR...

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual MODEL 52H HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HG HORIZONTAL GRINDER WITH 6 GUARD MODEL 52HSJ HORIZONTAL GRINDER WITH CONE WHEEL INSTALLED. 2 H.P. HORIZONTAL GRINDERS

More information

BRAKE SYSTEM Toyota Celica DESCRIPTION DRUM BRAKES ADJUSTMENTS BRAKE PEDAL HEIGHT ADJUSTMENTS BRAKE PEDAL FREE PLAY ADJUSTMENTS

BRAKE SYSTEM Toyota Celica DESCRIPTION DRUM BRAKES ADJUSTMENTS BRAKE PEDAL HEIGHT ADJUSTMENTS BRAKE PEDAL FREE PLAY ADJUSTMENTS BRAKE SYSTEM 1988 Toyota Celica 1988-89 BRAKES Toyota Celica, Corolla, MR2, Tercel DESCRIPTION The hydraulic brake system uses a tandem master cylinder with a vacuum power assist servo. MR2 and some Celica

More information

TROUBLESHOOTING. Avoid getting grease and oil on the drive belt and pulley faces.

TROUBLESHOOTING. Avoid getting grease and oil on the drive belt and pulley faces. 8 KICK STARTER/DRIVE PULLEY/ SERVICE INFORMATION... 8-2 TROUBLESHOOTING... 8-2 LEFT CRANKCASE COVER... 8-3 DRIVE PULLEY... 8-3... 8-7 KICK STARTER... 8-14 0 1 SERVICE INFORMATION GENERAL INSTRUCTIONS Avoid

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).

More information

55407 Spring. 15 mm Pin Wrench

55407 Spring. 15 mm Pin Wrench Disassembly Instructions - Variable Speed Pencil Grinder, 60K MAX. Models: 52850, 52855 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply. Open 51665 ON/OFF

More information

CS-800P Chain Saw CS-800P MOTOSIERRA

CS-800P Chain Saw CS-800P MOTOSIERRA Accessories for ECHO products can be found in our Accessories Catalog at: Accesorios por productos ECHO se puede encontrar en: www.echo-usa.com/products/catalogs PARTS CATALOG LISTA DE PIEZAS Chain Saw

More information

Drive/Motor Disassembly: Assembly Instructions - Quick-Change Pencil Grinder. Header 1. xxxxxx

Drive/Motor Disassembly: Assembly Instructions - Quick-Change Pencil Grinder. Header 1. xxxxxx Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Drive & Motor Models: 60051, 60052 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply.

More information