Arrow Shark 2013 Outboard Dragon Drive Owner Manual. Introduction
|
|
- Emory O’Neal’
- 6 years ago
- Views:
Transcription
1 Arrow Shark 2013 Outboard Dragon Drive Owner Manual Introduction Our purpose in designing the Dragon Drive is to offer a high quality, sleek looking and durable outboard drive for the growing RC F1 (Formula One) gas tunnel market. Designed for realistic operation on boats such as F1 Tunnel Hulls, the Dragon Drive can be fitted with our XP254M series engine for outstanding performance, or alternatively just about any other 23cc 31cc Zenoah mount compatible type engine can be easily installed without modification. The greater the time you dedicate to details whilst creating and developing a new product, the more issues will be found that can be improved. The more such issues you can attend to before the product is released, the more successful will be the product, and the happier will be your customers using it. Arrow Shark acknowledges that any of our new products may not be totally flawless for its release, because all products can be improved from time to time, especially in the light of customer feedback from use of the product in the "real world". However, Arrow Shark can and does put timeless testing and evaluation into our new products before release, and we do the best we possibly can to make each new product as near to perfect as practical before release. We have followed this approach with our new outboard Dragon Drive. After completion of extensive testing on the Dragon Drive, which has been in progress for almost two years with consequent re designs and improvement, the performance of this great drive has finally reached our expectation and we are very proud to present it for you
2 Dragon Drive Dimensions
3 Dragon Drive Weight Dragon Drive Parts List ODD#0001 Billet Main Body ODD#0009 Square Insert Collet ODD#0002 Top Cover & O Ring Seal ODD#0010 Middle Gear Barrel ODD#0003 Steering Bracket Assembly ODD#0011 Hardened Drive Shaft ODD#0004 Billet Lower Unit ODD#0012 Throttle Adaptor ODD#0005 Riding Plate ODD#0013 M4x10mm Bolts ODD#0006 Prop Shaft Housing Assembly ODD#0014 M5x25mm Bolts
4 ODD#0007 Clutch Bell Assembly ODD#0015 M5x40 Bolts ODD#0008 Clutch Shoe Assembly Procedure Items Required: 5mm Socket Hex Wrench (short wrench head) 4mm Socket Hex Wrench (short Wrench head) 3mm Socket Hex Wrench 2mm Socket Hex Wrench 21mm Wrench Loctite Silicone Sealant Machine Oil Note: Loctite should be applied to all bolts in the following assembly.
5 Apply some sealant on the flat part of the steel prop shaft housing, and apply some Loctite on the thread part of the housing. Note: The above sealing procedure is very important; without properly sealing, water might get into the lower unit or oil might leak out. As well, the Loctite on the thread part of the steel housing is very import, especially for the Dragon Drive with counter rotation application; without Loctite on the thread, the housing might loosen during operation which could cause gears to become improperly engaged leading to wear and possible damage. However, when you plan to unscrew the housing for maintenance or changing the oil after having applied Loctite on the thread, you will first need to loosen the Loctite by heating the thread area from outside of the unit with a heat gun. This technique will avoid damaging the threads on the inside of the lower unit. Using the 21mm wrench, screw the prop shaft housing assembly into the lower unit; please keep the front side pointed down until the sealant is dry. Apply some sealant to the middle gear housing. Fill the lower unit with gear oil ensuring that the bottom prop shaft gear is completely immersed in oil. Insert the middle gear housing into the lower unit, and then put it to one side for the moment. The sealing O ring has been factory installed in the main body unit; check that it is seated correctly and make ready for the next step along with the riding plate.
6 Position the riding plate on the bottom of the main body and use M4x10mm bolts to tighten them together; make sure to apply Loctite on the bolts. Get the steering bracket assembly and steering pivot pin ready for the next step. Connect the steering pivot pin via the steering pin holes on the top unit and the bracket assembly as shown on the above left picture. Use an M4 hex nut to tighten via the thread on the lower section of the main body to hold the pivot pin in place as shown in the above right picture. Now get both upper and lower assembly units ready for the next step. Apply some sealant around the top edge of the lower unit as shown in the above right picture.
7 Connect these two parts together and make sure the water intake nipple on the lower unit is properly aligned into the matching hole on the riding plate. Using two M5x25mm bolts, tighten these two parts together as shown in the above right picture. Prepare the clutch system and drive shaft for the next step. There is a circle mark on the outside of the square end drive shaft; make sure this end is going to the engine side (to the clutch bell and collet insert hole). Insert the other end of the drive shaft into the 1/4 square insert on the top gear shaft as shown in the above left picture. Install the clutch bell into the top unit and match the drive shaft square end into the square insert on the clutch bell.
8 There are two M5 thread holes on both sides of the top main body as shown in the above left picture; using two M5 hex nuts, tighten via the holes till they gently touch the clutch bearing in order to hold the clutch bell in place. Note: when you try to take out the clutch bell and install the collet instead, you will need to first unscrew these two M5 hex nuts before you will be able to release the clutch bell from the top main unit. Attach the throttle cable adaptor into the top cover plate and tighten it with an M5 bolt. You can adjust its position by loosening the bolt. Set Up & Performance Tips Set Up Dragon Drive with Clutch Installing the Clutch into your Dragon Drive will make it easier to launch and operate your boat. You will also be able to idle and stop your boat in the water with the engine still running, but if you do this for more than a minute, you must provide a separate water pump in the boat to cool the engine.
9 *Take out the spark plug from your engine and screw a piston stopper into the spark plug hole. *Position the Billet Water Seal Front Plate on the drive shaft end of your engine and install the clutch shoe on the engine crankshaft. Use the bolt from the square shaft collet (that comes in the package), and tighten it into the crankshaft. *Install the square ended both ends drive shaft into the drive along with the clutch bell, then, tighten those two M5 hex nuts on both sides of the drive to hold the clutch bell in place. *Insert the clutch shoe and engine assembly into the clutch bell at the top of the Dragon Drive unit. Secure your engine and clutch shoe into the clutch bell and Dragon Drive with the M5x40mm bolts. Your engine, clutch and Dragon Drive installation is now complete.
10 Set up Dragon Drive Without Clutch CAUTION! If the clutch has been removed, EXTRA CARE must be taken as the prop will be spinning whenever the engine is running, even when only at idle revs. Be especially carefully when starting your boat without a clutch, and when moving it with the engine running such as taking it to the water for launching. Do not allow other people near the back of the boat at any time, and ensure you do not allow any part of yourself or your clothing to be near the prop. * Remove the spark plug and insert a piston stopper into the spark plug hole. Use a heat gun on the clutch shoe bolt for about 20 seconds, then use a 6mm hex drive to unscrew the bolt until it is extended about 10mm out of the crankshaft.
11 *Hold the clutch shoe with one hand and then gently use a hammer to tap the top of the bolt until the clutch shoe comes off the crankshaft. *Loosen the M5 hex nuts from both sides of the Dragon Drive; then use a rubber hammer to gently tap on the bottom of the clutch bell housing until the clutch bell and bearing assembly come off the drive. Install the square insert shaft collet onto the crankshaft.
12 *Install the square ended both ends drive shaft into the drive. * Align and insert the square head of the drive shaft at the top of the Dragon Drive into the square insert of the collet on your engine. Secure your engine and Dragon Drive with the M5x40mm bolts. Your engine, square insert collet and Dragon Drive installation is now complete. Dragon Drive & Hull Set Up When installing the Outboard Dragon Drive onto your F1 tunnel hull, it is recommended that the prop shaft centerline be approximately 15 to 20mm above the level of the bottom of the sponsons.
13 Throttle Linkage Setting The Dragon Drive is designed to work on Arrow Shark rotated carburetor blocks with either WT series or WYK series Walbro carburetors. However, it will also be easy to work on Zenoah standard carburetor blocks with any of the Walbro carburetors typically fitted to these engines. To connect the throttle arm of your engine s carby to your radio s servo, a flexible cable such as is used for bicycle brakes can be adapted and fitted. Various other RC hobby cables can be used too. The size of the flex cable would be around 1.5mm in diameter and the cover tube about 4.3mm diameter; also required is a cable adaptor of the type shown in the picture above. Remove the carburetor throttle adaptor from the WYK 33; fit the cable adaptor onto it, then re install the throttle adaptor back onto carburetor.
14 *The inner diameter of the CNC cable adaptor would be around 4.4mm, so a diameter of 4.3mm on the bicycle or other flexible cable cover tube would be a neat fit when inserted about 15mm, and it should stay firmly inside without needing to apply any glue. *Install the CNC cable adaptor back onto the drive cover plate and screw the bolt nut on the top but do not yet tighten it. *Run the inner flex cable through the outer tube and also through the cable adaptor on the carburetor; then tighten the 3mm hex nut on the adaptor to hold the cable in place. *Adjust the CNC cable adaptor position and make sure that the flex cable is straight when the carburetor barrel is in the fully open position. When the cable position is set, tighten the nut with an 8mm wrench; the installation is complete!
15 If you are using the Arrow Shark rotated isolation carburetor block with a WT series carburetor for your engine, you can connect them at same way we did on WYK 33 carb as shown in the above right picture. * If you are using a standard Zenoah carburetor isolation block on your engine, you can link the cable directly to the carby butterfly arm as shown in the above right picture. Water Cooling Connection
16 Functions You can adjust the height and prop angle of your Dragon Drive as follows. Apply Loctite to all bolts and re tighten after adjustment to keep them secure during operation. #1: These are the vertical height adjusting bolts. Loosen these 4 bolts to adjust the complete unit up or down. #2: This is the prop angle securing bolt. When you have set the prop angle at your preferred position, screw in this bolt against the base of the bracket to maintain the correct prop angle during operation even though the #3 adjusting bolts are loosened. #3: This is the prop angle adjusting bolt A. Loosen this bolt to slide the Drive in or out and so adjust the prop angle for optimum performance. #4: This is the prop angle adjusting bolt B. Loosen this bolt when adjusting the prop angle, and tighten it when finished. #5: Adjustable throttle cable adaptor makes it easy to link the flexible cable from your servo to the engine carburetor. #6: Water outlet nipples link to your engine water jacket with tubing for proper engine cooling.
17 Lower Unit Bearing Setting The bearing in the Dragon Drive lower unit (shown in the picture above) is designed to be a loose fit, so that it can be easy to take out when you need to replace it. It is held in place by some Loctite; therefore, every time when you change the gear oil and re install the prop shaft housing assembly, make sure this bearing is still correctly in place. Make sure there is enough gear oil in the lower every time you use the drive. Thank You! Enjoy your Outboard Dragon Drive!
Arrow Shark TS760-Marine Onboard E-Starter. Owner Manual
Arrow Shark TS760-Marine Onboard E-Starter Owner Manual The TS760-Marine Onboard E-Starter has concluded years of experience Arrow Shark has on RC boat onboard E-Starter, it will work for about all brands
More informationArrow Shark 2016 M8 II Sterndrive - Collector Edition Owner Manual. M8 II weight: 925 grams Dimensions
Arrow Shark 2016 M8 II Sterndrive - Collector Edition Owner Manual M8 II weight: 925 grams Dimensions Parts List M8V2#0001 Billet Lower Unit M8V2#0013 Steering Cable Assembly M8V2#0002 Steering Arm Housing
More informationArrow Shark 2015 E-Starter V4 Owner Manual
Arrow Shark 2015 E-Starter V4 Owner Manual The Arrow Shark E-Starter V3 has successfully been available in the market for over three years now. During that time, we have never stopped seeking ways to improve
More informationArrow Shark TS 760A E Starter for Gas Cars. Owner s Manual
Arrow Shark TS 760A E Starter for Gas Cars Starting a Gas Engine Has Never Been So Easy! Owner s Manual The TS 760A is heavy duty equipment with most main components being CNC billet finished and anodized
More informationGearbox assembly manual
There are no propellor forces (axial load) allowed to the output shafts, more informations at the end of this manual Gearbox assembly manual Dear friend of fast boats, you have bought a gearbox kit. With
More informationDA Engine Info; 50R, 60, 85, 100, 120, 150, 170
DA Engine Info; 50R, 60, 85, 100, 120, 150, 170 1815 S. Research Loop Tucson, AZ 85710 USA Ph 520 722 0607 Fax 520 722 5622 Email info@desertaircraft.com Web www.desertaircraft.com All DA motors take the
More informationv Porsche 928
1985-86 32v Porsche 928 Toll-Free Tech Hot Line: 877-FOR-928M 877-367-9286 Please do not copy this manual and give copies to your friends. Our ability to bring you this supercharger kit at this price relies
More informationNext, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles.
Next, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles. Now, apply some anti-seize to the threads of the pivot stud. Also put anti-seize inside the bore
More informationWARNING: the engine does not come with oil in it. Please fill the oil before starting. The 200cc hardknock requires 9/10 of a quart of oil.
WARNING: the engine does not come with oil in it. Please fill the oil before starting. The 200cc hardknock requires 9/10 of a quart of oil. Things needed for assembly. -2 tubes of blue loc-tite. I don
More informationPorsche 928 with 16v LH-Jetronic Fuel System
Porsche 928 with 16v LH-Jetronic Fuel System Toll-Free Tech Hot Line: 877-FOR-928M 877-367-9286 Please do not copy this manual and give copies to your friends. Our ability to bring you this supercharger
More informationGo-ped ESR750 / ESR750EX Rear Brake Installation Instructions
Go-ped ESR750 / ESR750EX Rear Brake Installation Instructions This kit provides all the parts you need to install a rear brake on your ESR750 or ESR750EX. It will not work on an ESR Sport, or other Go-ped
More informationGR 4.0 Liter To Chevy Trans Adapter Kit GR 4.0 Liter Bell Housing Adaptor GR 4.0 Liter Flexplate Adaptor
Revision 12/20/12 1033040 1GR 4.0 Liter To Chevy Trans Adapter Kit 1033039 1GR 4.0 Liter Bell Housing Adaptor 1052025 1GR 4.0 Liter Flexplate Adaptor 1033039 Kit Contents 1 Bell housing Adapter Plate 2
More informationRD St N West Palm Beach, FL (478)
14842 93 RD St N West Palm Beach, FL 33412 1-(478) 247 7275 www.ch-ignitions.com Saito 120/150/180 CH Ignition Glow CDI & Gasoline Conversions Kit Install Instructions By converting your engine you may
More informationThis is the Unpacking Guide for the Optibike Pioneer Allroad electric bicycle. The Guide provides information required to remove the Allroad from the
This is the Unpacking Guide for the Optibike Pioneer Allroad electric bicycle. The Guide provides information required to remove the Allroad from the box and assemble it. If you have not assembled a bicycle
More informationBA /02/03/04/06/07/08/13/13B/15 BIG AIR KIT (BAK) - Yamaha Road Star (99-07)
BA-2020-00/02/03/04/06/07/08/13/13B/15 BIG AIR KIT (BAK) - Yamaha Road Star (99-07) Page: 1 Revision: 6.2-02/23/2011 Install Time: 1.5 Hours We recommend a qualified Yamaha technician install this kit
More informationRD St N West Palm Beach, FL (478)
14842 93 RD St N West Palm Beach, FL 33412 1-(478) 247 7275 www.ch-ignitions.com Saito 450 R CH Ignition Glow CDI & Gasoline Conversions Kit Install Instructions By converting your engine you may void
More information1996+ Yamaha G16 / G22 Yamaha G29/YDRA Drive
Vegas Carts & Performance 2995 Coleman St North Las Vegas, NV 89032 702-530-7753 VegasCarts.com 625cc Big Block Installation Instructions 1996+ Yamaha G16 / G22 Yamaha G29/YDRA Drive Revised 8/6/2018 1
More informationVersion 1.4 Operating instructions Czech Republic
Version 1.4 Operating instructions Czech Republic Please check updates of operating instructions at www.rotomotor.cz, that your engine has still the best care. (can happen important changes that will lead
More informationThough Indian s 111-cubic-inch engine delivers a
TECH by Chris Maida Andrews Indian 111 Camshafts Part I: Removing the cams from the camshaft compartment Tools Needed Red Loctite Clean rags 6mm Allen 5/64" Allen 3/32" punch External circlip pliers Needlenose
More informationTwoStep linkage. Installation guide Read this first. 2. Tools required for installation WARNING!
TwoStep linkage Installation guide HOT ROD CARBURETION CLOTHING & COLLECTIBLES SERVICE PARTS LINKAGE & FUEL DELIVERY If you need further information or assistance, please contact your Genuine Stromberg
More informationrev 6_09/23/14 EK7651H EK7651HD
D , D 1 Fuel Tank, Handle 258 3 4 7 6 5 2 1 8 9 10 11 13 15 14 12 26 25 27 23 24 20 19 18 17 16 39 38 28 29 22 21 259 41 40 37 36 35 270 32 31 30 34 33 44 46 45 43 48 47 42 50 49 52 51 2 , D 1 Fuel Tank,
More information2101 NITRO PRO STOCK DRAG KIT 2104 NITRO PRO MOD DRAG KIT
2101 NITRO PRO STOCK DRAG KIT 2104 NITRO PRO MOD DRAG KIT THANKS FOR BUYING RJ SPEED S NITRO DRAG KIT. IT IS A LITEWEIGHT CAR MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS
More informationCK-5000T Metropolis Patterson Transmission Crankset Installation Instructions Published Jul, ZSP001.v3 Full Speed Ahead
CK-5000T Metropolis Patterson Transmission Crankset Installation Instructions Published Jul, 2011. ZSP001.v3 Full Speed Ahead Introduction Congratulations on your Full Speed Ahead product. Please read
More informationPRO MAC /83 to 06/89 IPL Page 1 of 13 Tools & Accessories
11-4000188 PRO MAC 690 01/83 to 06/89 IPL 217066 Page 1 of 13 Tools & Accessories 11-4000188 PRO MAC 690 01/83 to 06/89 IPL 217066 Page 2 of 13 Tools & Accessories 215432 Pressure Test Tool 63137 Adaptor
More informationTools Required. Metric Wrench Set Screwdriver Set Metric Socket Set Pliers Heavy duty hydraulic Jack and Car Stands Box knife or similar Hacksaw WD40
Subaru 2004+ Legacy GT & Outback XT For JDM 2.0 twinscroll turbo and USDM 2.5 turbo models Front Mount Intercooler Fitting Instructions PN# LEG-1348-000 You are now the proud owner of a highly tested and
More informationSE206 Installation & Removal Guide
SE206 Installation & Removal Guide Tools Needed: Sockets 5/8" socket 9/16" socket 1/2 socket 18mm 3/8 socket 1-1/16 socket Wrenches 5/8" wrench 1/2" wrench Sealers/ Lubricants Grease Silicone sealant Gear
More informationPARTS LIST. Models. 45cc UT10946, UT10942
PARTS LIST Models cc UT0, UT0 cc " UT0, MUFFLER UP0 Muffler Kit UP0 Muffler Gasket UP00 Screw-Square Hd. UP00 Nut-Locking Hex (0-) UP00 Screen, Spark UP00 Screen Retainer UP0 Plate-Muffler UP0 Deflector,
More informationE02 CYLINDER HEAD COVER ASSY
TNG 150cc ZT E01 FAN COVER ASSY 1 BN0061-1 Clip 1 2 150ZT-E01.02 BN0064 Fan Cover 1 3 BN0061-2 Bracket 1 4 150ZT-E01.04 BN0064-4 Carburetor Cooling Duct 1 5 150ZT-E01.05 BN0064-3 Decorative Cover 1 6 150ZT-E01.06
More informationSherco Setup and Lubrication Guide
Sherco Setup and This guide is designed to provide the Sherco owner with instructions on how to: Set up a new bike Clean and re-oil the air filter Change the transmission oil Change the fork oil Repack
More information245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump
245 Chain Saw UT-10631 Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 2 of 16 Air Filter & Handles & Oil Pump Ref # Part Number Qty Description 1 80870 1 SCREW- 10-32 x 3/8 2
More informationrev 1_09/20/2017 PS-35C EA3500SR
C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7
More informationModel No. EK8100 POWER CUTTER
1 / 7 2 / 7 3 / 7 4 / 7 5 / 7 6 / 7 7 / 7 1 / 5 Item Parts No. Description I/C Qty N/O Opt. 1 Opt. 2 Note 001 168507-3 TANK CAP COMPLETE 1 D10 INC. 2 002 213080-9 O RING 29.5 1 003 163499-1 SUCTION HEAD
More informationK&T Saw Shop or
11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 2 of 12 Carburetor Assembly 1 224142-03 1 Carburetor
More information1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES
1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are
More informationRTR Instruction Manual
OFNA Racing 22692 Granite Way, Ste. B Laguna Hills, Ca. 92653 (949) 586-2910 Www.ofna.com RTR Instruction Manual PURE COMPETITION... PRE-ASSEMBLED ASSEMBLED CHASSIS WITH RADIO AND ENGINE REQUIRED FOR OPERATION
More informationX 3mm Flat Head Screw. Adjustment Hole x15x4mm Ball bearing. M2x10mm Hex Screw. Spring. Clutch Shoe. Ball.
INSTRUCTIONS #35017 NITRO OB-4 1/10 SCALE 2-SPEED TRANSMISSION SET (Shoe Type) * This professional two speed transmission is only for Nitro OB-4 1/10 Scale OB4 Gas Car Kits. Nitro Ob4 ASSEMBLY OF THE TWO
More informationMake these adjustments before racing
FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these
More informationAvoid damage to the motorcycle. Protect painted surfaces with a soft cloth or blanket.
HOUSINGS 7808 Thank You For Choosing Küryakyn! Protect yourself and others from potential injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding
More informationK&T Saw Shop or
11-600118 B PRO MAC 655 06/82 to 11/83 IPL 216159-R1 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600118 B PRO MAC 655 06/82 to 11/83 IPL 216159-R1 Page 2 of 16 Tools & Accessories 215432 Pressure
More information928 Motorsports Supercharger Installation Copyright 2007, 928 Motorsports, LLC All Rights Reserved
For Porsche 928 equipped with K-Jetronic (CIS) Fuel System Toll-Free Tech Hot Line: 877-FOR-928M 877-367-9286 Please do not copy this manual and give copies to your friends. Our ability to bring you this
More information2005 Chrysler 300 C ENGINE Mechanical - 3.5L - Service Information & Magnum
1. Install camshaft sprockets onto the camshafts. Install NEW sprocket attaching bolts into place. The 255 mm (10 in.) bolt is to be installed in the left camshaft and the 213 mm (8 3/8 in.) bolt is to
More informationinstallation manual 123\TUNE+-2CV
installation manual 123\TUNE+-2CV Installation Instructions The 123\TUNE+-2CV is designed for the stock (BLACK) 2CV-coil STEP 1 Turn the ignition off. Remove the engine fan use a long 14 mm socket or
More informationW205 C63 Suspension Adjustable Suspension Installation Guide
W205 C63 Suspension Adjustable Suspension Installation Guide 2015+ C63 AMG Sedan 2015+ C63S AMG Sedan Thank you for your purchase of the Weistec W205 C63 Adjustable Suspension. Please follow all directions,
More informationBackwater Performance Systems Large Vanguard Mikuni Twin Carburetor Kit
Backwater Performance Systems Large Vanguard Mikuni Twin Carburetor Kit 1. Throttle Cable Twin (CKC-41) 2. Carburetor VM30mm (CKC-40) 3. Loctite 242.5mL (A-210) 4. Air Cleaner Filter 6000 (EC-86) 5. Rev
More informationCALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL
CALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL 2 Table of Contents Section 1: General Information Page Handle Assembly Instructions 4 Maintenance All Models 6 Oil Change Procedures All Models 9 Height Adjustment
More informationRTX 2000 Thomas Compressor TG-550 Graco PN
RTX 2000 Thomas Compressor TG-550 Graco PN 246888 Print of Complete Compressor--------------Page 2 Instruction for Kit 118628-------------------Page 3 Instruction for Kit 287845-------------------Page
More informationE03 CYLINDER HEAD ASSY 1 BN0030 Dowel Pin 4
E01 FAN COVER ASSY 1 BN0061-1 Clip 1 2 150ZT-E01.02 BN0064 Fan Cover 1 3 BN0061-2 Bracket 1 4 150ZT-E01.04 BN0064-4 Carburetor Cooling Duct 1 5 150ZT-E01.05 BN0064-3 Decorative Cover 1 6 150ZT-E01.06 BN0063-2
More informationBETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE
BETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE FOR THE FOLLOWING SERIES T3XX-SRX AND T4XX-SRX SPRING RETURN
More information330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop
330 Chain Saw UT-10609 Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 2 of 17 Chain Brake and Chain Stop 1 80983 3 SCREW- (8-32 x 1/2) 2 70705 1 STOP- Chain 3 88048 1 SCREW- (10-24
More information1200 Southeast Ave Tallmadge, Ohio to 2014 Mustang (V6 & V8) Summit Racing Roll Stop Install Instructions.
1200 Southeast Ave Tallmadge, Ohio 44278 2010 to 2014 Mustang (V6 & V8) Summit Racing Roll Stop Install Instructions Part # SUM-760005 Thank you for considering the Summit Racing Roll Stop. Summit Racing
More informationThe M7 Direct Flow Intercooler (DFIC) Installation Guide
The M7 Direct Flow Intercooler (DFIC) Installation Guide This information is meant only as a guide. The author of this information,, or any M7 Tuning employees assumes no liabilities for any outcomes resulting
More informationInstructions for changing bearings on all B&C Technologies SP and HP models
Instructions for changing bearings on all B&C Technologies SP and HP models Tools and material required: 30 mm socket Socket handle with extension or air impact wrench Regular Screwdriver Phillips head
More informationSIDI Camshaft Position Actuator Replacement
BLOCK AND WEDGE TIMING CHAIN RETAINER USER GUIDE SIDI Camshaft Position Actuator Replacement Removal Procedure 1. Remove the camshaft cover. 2. Remove the camshaft position actuator solenoid valve solenoid
More informationAudi-Larm TM Audible Alarm: AirHawk II Air Mask
Audi-Larm TM Audible Alarm: AirHawk II Air Mask MAINTENANCE AND REPAIR MSA 011 (L) Rev. 0 MSA 2010 Prnt. Spec. 10000005389(I) Mat. 10104323 Doc. 10104323 REPLACEMENT KITS AND PARTS LIST Item P/N Description
More informationHIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
More information00-36A-04 CS-350T, CS-350TES, CS-350WES 1
00-36A-04,, 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationGP1-R FULL EXHAUST SUZUKI GSX-R600 / GSX-R
THIS EXHAUST SYSTEM IS DESIGNED FOR USE IN CLOSED COURSE RACING ONLY, AND IS NOT INTENDED FOR PUBLIC HIGHWAY USE. IN THE STATE OF CALIFORNIA, IT IS ILLEGAL TO MODIFY THE EMISSION CONTROL SYSTEM ON ANY
More informationAamir_bt The legend..
Aamir_bt The legend.. How to do timing on a 4XE1-W (DOHC) engine. well i decided to to a write up for DOHC timing since there was only the SOHC written up, and i had to do a timing belt on my stylus anyways,
More informationNext, set the bar level and tighten it down. Do this on both the driver and passenger sides.
Next, set the bar level and tighten it down. Do this on both the driver and passenger sides. Using two tape measures, measure the outside width at the front and the rear of the tubes. The front dimension
More informationCorkSport ort Mazda 3 Adjustable Shifter Mazdaspeed 3, Mazda 3 6-speed and Mazda3 SkyActiv 6-speed
Part # Axl-6-963 CorkSport ort Mazda 3 Adjustable Shifter 2010-2013 Mazdaspeed 3, 2010-2013 Mazda 3 6-speed and 2012-2013 Mazda3 SkyActiv 6-speed Pre-Installation Notes: The CorkSport Adjustable Short
More informationHURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance
FORM 159 0205 07/15 HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog #391 0205 2015 by Hurst Performance Thank you for purchasing the Hurst Comp/Plus Shifter.
More informationCHAIN SAW PARTS CATALOG MODEL CS-6700 TYPE 1E SERIAL NUMBER & UP
CHAIN SAW PARTS CATALOG MODEL CS-00 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 999203008 0/03 CS-00 TYPE 1E ENGINE, CRANKCASE, CYLINDER, PISTON 20 1 2 38 39
More informationAlways wear safety glasses when working on your vehicle.
90-93 MAZDA MIATA SUPERCHARGER KIT The KraftWerks 90-93 Mazda Miata Supercharger Kit was designed for easy installation. Competent mechanics with the appropriate tools will find the process to be relatively
More informationGeared Drives 200Z PSRU Zero Offset Gearbox with Centrifugal Clutch Assembly
Instructions for Removing and replacing Gen X Gearbox with Geared Drives 200Z Prior to your gear box arriving: Using a strap or chain and an engine hoist to hold your engine up in the mount, remove your
More information1900E Page 1 of 24 Air Filter & Insulator
1900E Page 1 of 24 Air Filter & Insulator 1900E Page 2 of 24 Air Filter & Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) GM010120 1 SCREW, CHOKE COVER (21cc) 2
More informationEngine Removal / Installation Yamaha 800
Step 1 Battery Removal 2.2 (Below) Remove the two 10mm bolts from the temperature sensor mount at the bottom of the stinger pipe and remove the sensor. 2.4 (Below) Loosen the waterbox coupler with a screwdriver
More informationCONT ENTS 1 ABOUT THIS PARTS LIST CONTENTS-ENGINE GROUP CONTENTS-FRAME GROUP ENGINE PARTS LIST FRAME PARTS LIST...
CONT ENTS 1 ABOUT THIS PARTS LIST...... 2 2 CONTENTS-ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP... 5 4 ENGINE PARTS LIST...... 9 5 FRAME PARTS LIST...... 45 1 ABOUT THIS PARTS LIST THIS PARTS LIST IS COMPILED
More informationJEEP TJ & (XJ 84-01) ATLAS 2 SPEED CABLE SHIFTER units built before 4/30/12
KIT CONSISTS OF: No. Qty Part No. Description 4320 Aerotech Center Way, Page 1 of 6 1 1 302051-RLE BASE- TWIN STICK MOUNT 42RLE 2 1 302080 STUD BOLT 1/2"-13 X 7 (XJ) 3 1 303120 SERRATED LOCK NUT 1/2"-
More informationINSTALLATION GUIDE CRF150R Manual Revision:
REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE CRF150R 191-810 Manual Revision: 032508 2002 Rekluse Motor Sports Rekluse Motor Sports, Inc. 110 E. 43rd Street Boise, Idaho 83714 208-426-0659
More informationJEEP TJ & (XJ 84-01) ATLAS 2 SPEED CABLE SHIFTER units built before 4/30/12
Paso Robles, CA 93447 PAGE 1 OF 6 Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-12-15 KIT CONSISTS OF: No. Qty Part No. Description 1 1 302051-RLE BASE- TWIN STICK MOUNT 42RLE 2 1 302075
More information26 Hume Reserve Court, Nth. Geelong, 3215 Phone: (03) Fax: (03) INSTALLATION MANUAL. for
26 Hume Reserve Court, Nth. Geelong, 3215 Phone: (03) 5272 2844 Fax: (03) 5272 2633 GEARLESS CENTRE DIFFERENTIAL FULL-TIME 4X4 TRANSFER CASE CONVERSION DEDICATED LOW RANGE INSTALLATION MANUAL for TOYOTA
More informationEngine Removal / Installation Yamaha 650 / 701X
Step 1 Battery Removal 2.1 (Below) Remove the flame arrestor screen. 2.3 (Below) Loosen the gas tank cap to relieve pressure. Be sure the fuel switch is turned to the OFF position, and be aware of any
More informationMoped Hospital Racing. Installation of performance parts MANUAL. Tecnigas Extreme Super 9
Moped Hospital Racing Installation of performance parts MANUAL Tecnigas Extreme Super 9 Page 2 These pages are to help the shop/person installing the parts that we sell. It is a general explanation of
More informationPRO THE ULTIMATE RACING MACHINE
PRO1 2004 THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2004 PRO1 race car. All this data is based on what our factory engineers and drivers
More informationINSTALLATION GUIDE. Kawasaki KLR Manual Revision:
REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE Kawasaki KLR650 191-640 Manual Revision: 030308 2007 Rekluse Motor Sports Rekluse Motor Sports, Inc. 110 E. 43rd Street Boise, Idaho 83714
More informationService Information Chevrolet Camaro 3.6L LFX Engine. Camshaft Position Actuator Replacement - Bank 1. Document ID:
Service Information 2014 Chevrolet Camaro 3.6L LFX Engine Camshaft Position Actuator Replacement - Bank 1 Document ID: 2900815 Special Tools Removal Procedure EN49982-1 Timing Chain Retainer EN49982-2
More informationPLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.
INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items
More informationM MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or
11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester 91485 Wrench -
More information1. Get fork mounted in stand. You can leave it in the bike, but you must remove the wheel and front brake.
Tools Needed: Bike stand Lint free shop Towels 1.5mm Allen Key Pick Set Grease (We recommend Slick Honey) Oil Measuring Cup (with cc Scale) Small Metal Drift Shop Vise Oil Bucket 13mm Deep Socket (6 point)
More informationrev 8_ EK6101 PC-6114
1 Fuel Tank, Handle 1 14 13 12 15 22 2 3 4 11 6 10 23 16 8 174 7 24 25 28 USA CDN 180 26 31 29 21 30 20 32 9 33 33 17 19 18 2 1 Fuel Tank, Handle 1 1 315-114-640 FUEL TANK CPL. BLUE 1 MAKITA 1 1 315-114-601
More informationOIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335is (N54 engine) with BMW M-Technic bumper and with stock oil cooler
OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0923 APPLICATION: 2011 E92 335is (N54 engine) with BMW M-Technic bumper and with stock oil cooler Congratulations for being selective enough to
More informationInstallation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#
Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,
More informationPart Number : DDM-07-RIS
RACE INTAKE SYSTEM, R56 MINI Cooper S - 2007+ Part Number : DDM-07-RIS This kit includes: Part Number Description Qty DDM-07-006 DDMWorks PFB, Pressurized Filter Box 1 DDM-07-017 DDMWorks RAS, Ram Air
More informationPARTS LIST CHAIN SAW G415AVS
2869-93211 (709) (for Australia) PARTS LIST CHAIN SAW G415AVS : 1. Use ZENOAH genuine parts specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines, those which
More informationIAG Air / Oil Separator (AOS) For STi
IAG Air / Oil Separator (AOS) For 2008-14 STi Part# IAG-ENG-7000 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors Sockets: 10mm, 12mm 13mm Wrenches: 10mm,
More informationReady to Run Owner s Manual (Online Version)
Ready to Run Owner s Manual (Online Version) Thank you for choosing BONZÍ SPORTS. Please read the following instructions carefully before attempting to operate your Bonzi boat. Failure to do so could result
More informationFirst, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
More informationRepair Manual 11/99 PS-34. Page 1
Repair Manual /99 PS-4 Page Table of contents Index Technical Data page Special tools 4 Repair instructions, general 0 Chain brake 6 0 Centrifugal clutch 8 0 Oil pump 9-04 Ignition system - 0 Starting
More information26cc 4.5 KWA Marine Engine
26cc 4.5 KWA Marine Engine Thank you for purchasing your new Venom 26cc 4.5 KWA Marine Engine. Not only did you purchase a top of the line R/C Marine Engine but you have also joined the Venom Team and
More information10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:
10-25J-00 SRM-261T 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationGM 3000 AIRLESS PAINT SPRAYERS Drive Housing Replacement Kit Pinion Housing Replacement Kit
INSTRUCTIONS 08660 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. B GM 000 AIRLESS PAINT SPRAYERS Drive Housing Replacement Kit 869 Pinion Housing
More informationIntroduction Warning Suggested Field Equipment and Supplies Contents of Kit Section 1: Building the Boat Stand...
TM INSTRUCTION MANUAL Overall Length...................... 61 1 /2" Hull Length......................... 55" Beam............................ 14 3 /4" Weight.......................... 14.5 lb Speed..........................
More informationUser Manual. Please read this user manual before use Edition
User Manual Please read this user manual before use. 2015.7.9 Edition Information on how to use GT Roller Flex3 GT Roller Flex3 is a new type trainer that has unique structure and characters. Read this
More informationINTRODUCTION. Reference No L-01 R E V I SED :
10-25L-01 SRM-265ES 1 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL SURGE TANK INSTALL KIT Honda S2000 Document# 19-0063 Support: info@radiumauto.com WARNING: DO NOT SMOKE WHILE WORKING ON FUEL SYSTEMS. KEEP SPARKS AND OPEN FLAMES AWAY FROM
More informationINSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT
INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT Thank you for choosing the Motor Trike Cross Country / Cross Roads / Hard Ball rake kit. We ask that you read
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL PUMP SLEEVE INSTALLATION KIT 2001-2006 BMW E46 M3 Document# 19-0058 Customer Support: info@radiumauto.com 1. There are 2 common ways to relieve fuel pressure on the BMW.
More informationInstructions to install the early ( ) Limited Slip Differential in the Late-model ( ) G28 Transaxle
Instructions to install the early (1978-83) Limited Slip Differential in the Late-model (1985-1995) G28 Transaxle BACKGROUND: Most 928 owners know about the improvements to the 5- speed transaxle that
More informationManual GLOGO
Manual GLOGO 690 www.mikado-heli.de Mikado Model Helicopters GmbH Graf-von-Schwerin-Str. 40 14469 Potsdam Germany phone +49 (0)331 3749-0 fax +49 (0)331 3749-11 www.mikado-heli.de Mikado Model Helicopters
More informationDISASSEMBLY AND REASSEMBLY
24 01 DISASSEMBLY AND REASSEMBLY COMPONENTS AND SPECIAL TOOLS Injector Puller Y99220072B Glow Plug Wrench Y99220132B Fuel Pipe Wrench Sealing Caps 665 995 5844 Injector Copper Washer Puller Y99220022B
More information