Cylinders and Keys Cylindrical Locks Mortise Locks Exit Devices Door Closers

Transcription

1 Architectural Hardware Product Guide Condensed Catalog Cylinders and Keys Cylinders and Keys Cylindrical Locks Cylindrical Locks Mortise Locks Mortise Locks Exit Devices Exit Devices Door Closers Door Closers

2 Featured Products ML2000 Vandal Resistant Trim Page 14 Designed for high-traffic commercial, industrial, institutional and government buildings that require a greater degree of security and vandal resistance not found on other mortise trims. CL3352 Classroom Intruder Lock......Page 17 Improving upon standard classroom locksets, the CL3352 is keyed on both sides, allowing locking of the outside lever from either inside or out. Exit is always possible, and the "anti-panic" feature maintains safety and security by keeping the outside lever locked if the inside lever is activated. Delayed Egress Exit Device Page 53 The Corbin Russwin Delayed Egress Exit Device for the ED4000/ED5000 series provides access control, increased security and consistent aesthetics to rim, SecureBolt, concealed vertical rod and mortise exit devices. Corbin Russwin Product Guide.2

3 Index Since 1839, Corbin Russwin has manufactured safe, secure and durable hardware to meet America s building needs. In today s multi-room facilities, where security and code compliance hardware are foremost in the minds of architects and builders, Corbin Russwin continues to fulfill both the functional and aesthetic requirements of the construction industry. Architecturally, Corbin Russwin is advancing into the next century and beyond. The practical day-to-day workload that architectural hardware products must endure is the performance standard on which we ve built our reputation. Key Systems Page 4 Patented High Security Cylinders Pyramid Page 5 Mortise Locksets ML Page 6 Light/Medium Duty Knob Locksets CK4700 Series Page 26 Unit Locksets UT5200 Series Page 28 Padlocks, Deadlocks, Push-Pull Page 30 Mortise Lever Trims ML2000 Vandal Resistant Mortise Trim Page 14 Crossbar Exit Device ED6000 Series Page 32 Decorative Mortise Lever Trims Vineyard Collection Page 15 Crossbar Exit Device ED7000 Series Page 33 Extra Heavy Duty Cylindrical Lever CL Page 16 Pushbar Exit Device ED8000 Series Page 34 Heavy Duty Cylindrical Lever Locksets CL Page 17 Pushbar Exit Device ED5000 Series Page 35 Heavy Duty Cylindrical Lever Locksets CL Page 18 Pushbar Exit Device ED4000 Series Page 37 Standard Duty Key-In-Lever Locksets CL Page 19 Door Closers DC2000/DC3000 Series Page 38 Light/Medium Duty Lever Locksets CL Page 20 Door Closers DC4600 Series Page 40 Heavy Duty Cylindrical Knob Locksets CK Page 24 Electrified Products Page 44 Standard Duty Cylindrical Knob Locksets CK Page 25 Corbin Russwin Product Guide.3

4 Key Systems To provide the desired level of security, even the finest architectural hardware requires a properly designed and maintained master key system. The keying system is the software of a building's security. As shown in the schematic below, it turns each hardware product into an access control device. The choice of cylinder mechanism must be planned together with the keying system. The variety of mechanisms available from Corbin Russwin offers the right balance of security, convenience and expansion capability for every job. Corbin Russwin Product Guide.4

5 Functions Pyramid High Security Cylinders Especially recommended for installations requiring superior protection against picking, drilling and other surreptitious entry. Ideally suited for Educational and Healthcare facilities, Industrial and Commercial buildings. Without Key With Key Cylinder Feature ML2000 Mortise Locks ML2000HS Mortise Locks CL3200 Security Bolt CL3300 Lever Locks CL3600 Lever Locks CL3700 Lever Locks CL3900 Lever Locks CK4200 Knob Locks CK4400 Knob Locks CK4700 Knob Locks UT5200 Unit Locks Pushbar Exit Devices Crossbar Exit Devices Pyramid Cylinders Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes IC Visual Key Control Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Concealed Key Control Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes IC Construction MK Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 7-Pin Cylinder Yes Yes Yes Yes IC Yes Yes Yes Yes Yes Yes Security Cylinder Yes Yes IC Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Interchangeable Core Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Security IC Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Master Ring Cylinder Yes Yes Yes Yes Blockout Function Yes Yes Yes Yes Yes Yes Exclusions apply to certain functions and trims. Consult individual catalog sections for availability. DL2100 Deadlocks DL3000 Deadlocks DL3100 Deadlocks DL4000 Deadlocks PL5000 Padlocks Corbin Russwin Product Guide.5

6 ML2000 Series Designed for high-traffic commercial, institutional, industrial and government buildings where security is of the greatest concern. Advantages Patented (6,349,982) quick-reversible feature enables users to reverse hands without disassembling lock case. Meets or exceeds ANSI Operational & Security Grade 1 requirements. Provides life safety and security in a single door prep, saving the additional cost of a deadlock. Through-bolted trim designs for proper alignment and increased security. Trim designs compatible with other Corbin Russwin cylindrical, pre-assembled and exit device trims. Can be used with new or existing Corbin Russwin key systems and those of most other manufacturers. Patented (6,349,982) latchtail enables easy handing changes Heavy gauge internal parts provide security, reliability, and durability Armored front conceals lock mounting screws and one-piece heavy gauge steel front 1" throw, one-piece deadbolt meets security Grade 1 Heavy-duty 3/4" throw latchbolt with stainless steel insert provides positive secure latching Handing Handed; quick reversible. Door Thickness 1-3/4" (44mm)- standard. Backset 2-3/4" (70mm). Lock Case Heavy gauge chrome-plated steel, 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm). Front Heavy gauge steel, 8" (203mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt 2-piece mechanical with anti-friction insert, 5/8" (16mm) x 1" (25mm)x 3/4" (19mm) throw. Deadbolt One-piece stainless steel, 19/32" (15mm) x 1-1/4" (32mm) x 1" (25mm) throw. Strike Wrought brass or bronze, ANSI straight lip standard, 4-7/8" (124mm) x 1-1-1/4" (32mm) x 1-1/8" (29mm) lip to center. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Plug only to show (concealed shell) 7-pin Pyramid Security Interchangeable core (IC) Pyramid IC Security IC Master ring cylinder Blockout cylinder Flex head cylinder Keys Two nickel-silver standard. Warranty Five-year limited. One-year warranty on finish. Certification/Compliance ANSI Meets A Series 1000, Operational and Security Grade 1. Meets A117.1 Accessibility Code of the ADA. Federal Meets FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL / ULC All locks listed for A label and lesser class single doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629, 630. Corbin Russwin Product Guide.6

7 ML2000HS Series Designed for high-traffic commercial, industrial, institutional and government buildings that require a greater degree of security than traditional mortise locksets provide. Advantages Flush-mounted security cylinder with pick-resistant interlocking pins. Cast escutcheons and knobs double throughbolted. Security Torx screws, standard. Armored front to protect against tampering. One-piece, corrosionresistant heavy gauge steel front Stainless steel 1 (25mm) throw deadbolt meets Security Grade 1 Heavy duty antifriction latch standard Security torx screws standard, throughbolted from both sides Flush mounted 6- pin security cylinder standard Heavy gauge internal parts Cast knobs and escutcheons, tapered to deflect hammer blows Handing Handed; quick reversible. Door Thickness 1-3/4" (44mm)- standard. Backset 2-3/4" (70mm). Lock Case Heavy gauge chrome plated steel, 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm). Front Heavy gauge steel, 8" (203mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt 2-piece mechanical with anti-friction insert, 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw. Deadbolt One-piece stainless steel, 19/32" (15mm) x 1-1/4" (32mm) x 1" (25mm) throw. Hub Knob: stainless steel, 3/8" (9.5mm). Strike Wrought brass or bronze, ANSI straight lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8" (29mm) lip to center. Cylinder Brass, 6-pin security, L4 keyway standard. Keying Available Master keying Concealed key control 7-pin conventional cylinder Pyramid Security Interchangeable core (IC) Pyramid IC Security IC Blockout cylinder Keys Two nickel-silver standard. Warranty Five-year limited. One-year warranty on finish. Certification/Compliance ANSI Meets A Series 1000, Grade 1. Federal Meets FF-H-106C. UL/ULC All locks listed for A label and lesser class single doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Finishes BHMA 605, 606, 611, 612, 613, 625, 626. Corbin Russwin Product Guide.7

8 Lockset Functions ML2000 Series Series/ ANSI No. Outside Inside Function Type Series 1000 Function Description ML2011 VR Deadlock F18 - Deadbolt by key outside. - No inside operation. - Deadbolt by key either side. ML2012 VR Deadlock F16 - Deadbolt by key outside or by thumbturn lever inside. ML2013 HS Classroom F17 VR ML2017 VR Classroom Deadlock - Deadbolt by key outside. - Thumbturn lever inside retracts deadbolt only; will not project deadbolt. ML2010 HS Passage or Closet F01 - Latchbolt by grip either side. - Both grips always free. VR ML2020 HS Privacy Bedroom or Bathroom F02 - Latchbolt by grip* either side. - Deadbolt by thumbturn lever inside or by emergency release tool outside. VR - Latchbolt by grip* either side. - Deadbolt by key either side. ML2022 HS Store Door F14 VR ML2024 ML2029 Corbin Russwin Product Guide.8 HS VR HS VR Entrance or Storeroom Hotel or Motel F21 F15 - Latchbolt by grip* either side. - Deadbolt by key outside or by thumbturn lever inside. HS Indicates function availability in ML2000HS. VR Indicates function available in Vandal Resistant Trim (ML2000VR). * When lever handles are furnished, both outside and inside are locked when deadbolt is projected. - Latchbolt by grip inside and by guest key or master key outside. - Outside grip always rigid. - Deadbolt by thumbturn lever inside or by emergency key outside. (ML2029) - Inside grip simultaneously retracts latchbolt and deadbolt. (ML2029) - Emergency key shuts out all other keys. (ML2029) - Emergency key throws deadbolt, shutting out all other keys and preventing exit from inside. (ML2029HS) - Auxiliary latch deadlocks latchbolt. Indicates rigid grip.

9 Lockset Functions ML2000 Series Series/ ANSI No. Outside Inside Function Type Series 1000 Function Description ML2065 HS Dormitory, Entrance or Storeroom F13 - Latchbolt by grip either side. - Deadbolt by key outside or by thumbturn lever inside. - Inside grip simultaneously retracts latchbolt and deadbolt. VR ML2067 HS Apartment or Dormitory F12 - Latchbolt by grip either side, unless outside grip is locked by toggle-action stop or by projection of deadbolt. - Deadbolt by key outside or by thumbturn lever inside. - Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked. - Auxiliary latch deadlocks latchbolt. VR ML2069 HS Institutional Privacy - Latchbolt by grip either side, except when outside is locked by thumbturn inside. - Operating inside grip or closing door unlocks outside grip. - Key outside retracts latch at all times, even if thumbturn is held in locked position. - Auxiliary latch deadlocks latchbolt. VR ML2072 VR Classroom Security - Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt. - Deadbolt thrown by key from either side. - Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked. - Retracting latchbolt by key unlocks outside lever. - Auxiliary latch deadlocks latchbolt. ML2075 VR Classroom Security - Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt. - Deadbolt thrown by outside key or inside thumbturn. - Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked. - Retracting latchbolt by thumbturn unlocks outside lever. - Auxiliary latch deadlocks latchbolt. - Grip acts as pull only; no operation. ML2050 Half Dummy Trim - Grips act as pulls only; no operation. ML2070 Full Dummy Trim HS VR Indicates function availability in ML2000HS. Indicates function available in Vandal Resistant trim (ML2000VR). * When lever handles are furnished, both outside and inside are locked when deadbolt is projected. ** When so specified, change key will be furnished to operate inside cylinder. Indicates rigid grip. Corbin Russwin Product Guide.9

10 Lockset Functions ML2000 Series Series/ ANSI No. Outside Inside Function Type Series 1000 Function Description ML2065 HS Dormitory or Entrance F13 - Latchbolt by grip either side. - Deadbolt by key outside or by thumbturn lever inside. - Inside grip simultaneously retracts latchbolt and deadbolt. VR ML2067 HS Apartment or Dormitory F20 - Latchbolt by grip either side, unless outside grip is locked by toggle-action stop or by projection of deadbolt. - Deadbolt by key outside or by thumbturn lever inside. - Inside grip simultaneously retracts latchbolt and deadbolt; outside grip remains locked. - Auxiliary latch deadlocks latchbolt. VR ML2069 HS Institutional Privacy - Latchbolt by grip either side, except when outside is locked by thumbturn inside. - Operating inside grip or closing door unlocks outside grip. - Key outside retracts latch at all times, even if thumbturn is held in locked position. - Auxiliary latch deadlocks latchbolt. VR ML2072 VR Classroom Security - Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt. - Deadbolt thrown by key from either side. - Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked. - Retracting latchbolt by key unlocks outside lever. - Auxiliary latch deadlocks latchbolt. ML2075 VR Classroom Security - Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt. - Deadbolt thrown by outside key or inside thumbturn. - Inside lever simultaneously retracts latchbolt and deadbolt; outside lever remains locked. - Retracting latchbolt by key unlocks outside lever. - Auxiliary latch deadlocks latchbolt. - Grip acts as pull only; no operation. ML2050 Half Dummy Trim - Grips act as pulls only; no operation. ML2070 Full Dummy Trim HS Indicates function availability in ML2000HS. Corbin Russwin Product Guide.10 VR Indicates function available in Vandal Resistant trim (ML2000VR). Indicates rigid grip. * When lever handles are furnished, both outside and inside are locked when deadbolt is projected. ** When so specified, change key will be furnished to operate inside cylinder.

11 ML2000 Series Lustra Complies with codes requiring 1/2 " (13mm) lever return Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) LWA LWB LWF Lever: Wrought Rose: Wrought Lever: Wrought Rose: Cast Lever: Wrought Rose: Cast LSA LSB LSf 2-1/4 2-1/2 (64) 5-1/8 (130) Rose: Wrought Rose: Cast Rose: Cast Regis Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) RWA RWB RWF Lever: Wrought Rose: Wrought Lever: Wrought Rose: Cast Lever: Wrought Rose: Cast RSA RSB RSF 2-1/4 2-1/2 (64) 5-1/8 (130) Rose: Wrought Rose: Cast Rose: Cast Citation Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) CSA CSB CSF Rose: Wrought Rose: Cast Rose: Cast All F roses = 2-7/8" (73mm) diameter cast All F roses = 2-7/8" (73mm) diameter cast All F roses = 2-7/8" (73mm) diameter cast 2-1/4 2-5/8 (67) 4-3/8 (111) 2-1/4 2-1/4 2-1/4 7-1/2 (190) 5-1/8 (130) 7-1/2 (190) 5-1/8 (130) 7-1/2 (190) 4-3/8 (111) LWM LSM Lever: Wrought 2-1/2 (64) RWM RSM Lever: Wrought 2-1/2 (64) CSM 2-5/8 (67) 2-1/4 2-1/4 2-1/4 7-1/2 (190) 5-1/8 (130) 7-1/2 (190) 5-1/8 (130) 7-1/2 (190) 4-3/8 (111) LWN LSN Lever: Wrought 2-1/2 (64) RWN RSN Lever: Wrought 2-1/2 (64) CSN 2-5/8 (67) 1-5/8 (41) 7 (178) 4-3/8 (111) LWP LSP Lever: Wrought RWP RSP Lever: Wrought CSP 2-5/8 (67) 1-3/4 (44) LSR Escutcheon: Cast RSR Escutcheon: Cast CSR 8-1/2 (216) Escutcheon: Cast 2-5/8 (67) 4-3/8 (111) Corbin Russwin Product Guide.11

12 ML2000 Series Newport Complies with codes requiring 1/2 " (13mm) lever return Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) Armstrong Complies with codes requiring 1/2 " (13mm) lever return Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) Dirke Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) 2-1/4 2-1/4 2-1/4 NSA NSB NSF Rose: Wrought Rose: Cast Rose: Cast 2-5/8 (67) 4-13/16 (122) ASA ASB ASF Rose: Wrought Rose: Cast Rose: Cast 2-5/8 (67) 4-1/2 (114) DSA DSB DSF Rose: Wrought Rose: Cast Rose: Cast All F roses = 2-7/8" (73mm) diameter cast All F roses = 2-7/8" (73mm) diameter cast All F roses = 2-7/8" (73mm) diameter cast 2-11/16 (68) 4-1/2 (114) 2-1/4 2-1/4 2-1/4 NSM 7-1/2 (190) 2-5/8 (67) 4-13/16 (122) ASM 7-1/2 (190) 2-5/8 (67) 4-1/2 (114) DSM 7-1/2 (190) 2-11/16 (68) 4-1/2 (114) 2-1/4 2-1/4 2-1/4 7-1/2 (190) 4-13/16 (122) 7-1/2 (190) 4-1/2 (114) 7-1/2 (190) 4-1/2 (114) NSN 2-5/8 (67) ASN 2-5/8 (67) DSN 2-11/16 (68) 1-5/8 (41) 1-5/8 (41) 1-5/8 (41) 7 (178) 4-13/16 (122) 7 (178) 4-1/2 (114) 7 (178) 4-1/2 (114) 2-5/8 (67) 2-5/8 (67) 2-11/16 (68) NSP ASP DSP 1-3/4 (44) 1-3/4 (44) 1-3/4 (44) 8-1/2 (216) 4-13/16 (122) 8-1/2 (216) 4-1/2 (114) 8-1/2 (216) 4-1/2 (114) NSR Escutcheon: Cast 2-5/8 (67) ASR Escutcheon: Cast 2-5/8 (67) DSR Escutcheon: Cast 2-5/8 (67) Corbin Russwin Product Guide.12

13 ML2000 Series Essex Complies with codes requiring 1/2 " (13mm) lever return Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) ESA ESB ESF Rose: Wrought Rose: Cast Rose: Cast 2-1/4 2-7/16 (62) 4-5/8 (117) All F roses = 2-7/8" (73mm) diameter cast 2-1/4 Princeton Complies with codes requiring 1/2 " (13mm) lever return Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) PSA PSB PSF Rose: Wrought Rose: Cast Rose: Cast 2-1/4 2-1/2 (64) 5-1/4 (133) All F roses = 2-7/8" (73mm) diameter cast 2-1/4 Global Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) GSA GRC GWC Knob: Cast Escutcheon: Wrought Knob: 2-7/8" Wrought reinforced Rose: Wrought reinforced Knob: 2-7/8" Wrought Rose: Wrought reinforced GRD GWD GSF 2-7/8 (73) 2-1/4 3 (76) Knob: 3-1/2" Wrought reinforced Rose: Wrought reinforced Knob: 3-1/2" Wrought Rose: Wrought reinforced Knob: 3-1/2" Wrought Rose: Wrought reinforced ESM 7-1/2 (190) 2-3/8 (60) 4-5/8 (117) PSM 7-1/2 (190) 5-1/4 (133) 2-1/2 (64) GRE GWE 2-7/8 (73) Knob: Wrought reinforced Square Rose: Wrought reinforced Knob: Wrought Square Rose: Wrought reinforced 3 (76) 2-1/8 (54) 2-1/4 2-1/4 2-1/4 7-1/2 (190) 4-5/8 (117) 7-1/2 (190) 5-1/4 (133) 7-1/2 (190) 2-1/4 ESN 2-3/8 (60) PSN 2-1/2 (64) GRM GWM Knob: Wrought reinforced Knob: Wrought 3 (76) 1-5/8 (41) 1-5/8 (41) 1-5/8 (41) 7 (178) 4-5/8 (117) 7 (178) 5-1/4 (133) 8-1/2 (216) 2 (51) ESP 2-3/8 (60) PSP 2-1/2 (64) GRP GWP Knob: Wrought reinforced Knob: Wrought 2-3/4 (70) 1-3/4 (44) 1-3/4 (44) 1-5/8 (41) 8-1/2 (216) 4-5/8 (117) 8-1/2 (216) 5-1/4 (133) 8-1/2 (216) 2 (51) ESR Escutcheon: Cast 2-7/16 (62) PSR Escutcheon: Cast 2-1/2 (64) GSR Knob: Cast Escutcheon: Cast 2-3/4 (70) Corbin Russwin Product Guide.13

14 ML2000 Series ML2000HS Series Belmont Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) BRC BWC BRE BWE Knob: Wrought reinforced Rose: Wrought reinforced Knob: Wrought Rose: Wrought reinforced BRD BWD Knob: Wrought reinforced Rose: Wrought reinforced Knob: Wrought Rose: Wrought reinforced 2-3/16 (55) 2-7/8 (73) 2-3/16 (55) Knob: Wrought reinforced Rose: Wrought reinforced Knob: Cast Rose: Wrought 2-3/16 (55) 3 (76) 2-3/16 (55) Yankee Brass, bronze, stainless steel Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) YWA YWF Knob: Wrought Rose: Wrought Knob: Wrought Rose: 2-7/8" diameter cast Knob: Wrought YWM Surety Brass or bronze Door Thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) SST 8-1/2 (216) 1-3/4 (44) 2-1/8 (54) Knob: Cast Stainless Steel Escutcheon: Cast Stainless Steel ML2000 Vandal Resistant Series Newport Door Thickness: Spindles self-adjusting, 1-3/4" (44mm) to 2-1/4" (57mm) 2-3/16 (55) 2-1/4 7-1/2 (190) 2-3/16 (55) YWN Knob: Wrought NSV Stainless Steel Escutcheon: Cast stainless steel BRM BWM Knob: Wrought reinforced Knob: Wrought 2-7/8 (73) Citation Door Thickness: Spindles self-adjusting, 1-3/4" (44mm) to 2-1/4" (57mm) 1-5/8 (41) YWP Knob: Wrought BRP BWP Knob: Wrought reinforced Knob: Wrought 7 (178) 2-7/8 (73) 2-3/16 (55) Knob: Wrought YWR CSV Stainless Steel Escutcheon: Cast stainless steel Corbin Russwin Product Guide.14

15 Vineyard Collection Merlot Frascati MSG Rose: Cast FSG Rose: Cast MSL Escutcheon: Cast FSL Escutcheon: Cast Zinfandel Tuscany Complies with codes requiring lever to return to within 1/2" (13mm) of door face. ZSG Rose: Cast Specify Hand TSG Rose: Cast Specify Hand ZSL Escutcheon: Cast Specify Hand TSL Escutcheon: Cast Specify Hand Corbin Russwin Product Guide.15

16 CL3200 Series A heavy-duty, high-use lockset that combines the convenience of a barrier-free lever lockset with the security of a 1" (25mm) deadbolt in a single door prep. Advantages Enhanced access - 20 turn of lever retracts deadbolt. Combines 1/2" (13mm) throw latch and 1" (25mm) throw deadbolt. Cost-effective - requires less installation time than separate lockset and deadbolt. Exceeds ANSI Grade 1 requirements. Utilizes standard door prep. Innovative rackand-pinion design allows latchbolt to retract with 20 turn of lever Through-bolts ensure proper alignment, smooth operation and security Hardened steel spindle for security and long life 1/2 (13mm) throw latchbolt projects to 1 (25mm) throw deadbolt, combining convenience and security in one Lever standard door prep attached to rose for vandal resistance Handing Specify hand. Door Thickness 1-3/8" (35mm)- 1-3/4" (44mm) standard. Backset 2-3/4" (70mm) only. Lock Chassis Hardened steel, zinc and dichromate plated for corrosion resistance. Front Brass, bronze or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt Brass 1/2" (13mm) throw latch projects to 1" (25mm) throw deadbolt. Hardened steel insert, nylon anti-friction insert. Strike Wrought brass or bronze, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Cylinder Brass, 6-pin interchangeable core (IC), L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Security IC Pyramid IC Keys Two nickel-silver standard. Warranty Two-year limited. Certification/Compliance ANSI Meets A117.1 Accessibility Code of the ADA. Federal Meets FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL/ULC All locks listed for A label and lesser class single doors, 4' x 10'. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629, 630. Corbin Russwin Product Guide.16

17 CL3300 Series Ideal for high-use commercial, industrial and institutional applications such as schools, universities, hotels, offices and apartments. Advantages Patented lever release design for vandal resistance. Solid cast levers. Independent return springs prevent lever sag. Anti-rotation throughbolts. Exceeds ANSI Grade 1 requirements. UL 3-hour fire rating for 4' x 10' door. Anti-rotational throughbolts at 6 and 12 o clock positions 1/2" (13mm) throw latchbolt 3 solid, cast lever options, non-handed with LEVER RELEASE design Expanded keying options CL3352 Classroom Intruder Function The CL3352 classroom intruder lock improves upon standard classroom function locks by providing double cylinder control, allowing the teacher to secure the door from the inside. The "anti-panic" feature always allows egress while leaving the outside lever locked. Thus classroom security is ensured while allowing safe and easy egress. Handing Non-handed. Door Thickness 1-3/4" (44mm) to 2" (51mm) standard. 2" (51mm) to 2-1/4" (57mm) Optional. Backset 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5" (127mm). Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Wrought brass or bronze. 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Optional; rounded corners. Latchbolt Brass, chrome plated with 1/2" (13mm) throw. Optional: 3/4" (19mm) throw deadlocking fire latch for pair of doors. Auxiliary Latchbolt Deadlocking latchbolt prevents manipu-lation when door is closed. Strike Wrought brass or bronze, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Optional strikes, lip lengths and ANSI wrought strike box available. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Interchangeable core (IC) Pyramid Pyramid IC Security Security IC (not available with CL3329) Keys Two nickel silver standard. Warranty Five-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 1. Meets A117.1 Accessibility Code of the ADA. Federal Meets FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL / ULC All locks listed for A label and lesser class single doors, 4' x 10'. Finishes BHMA 605, 606, 611, 612, 613, 625, 626. Zinc levers are plated to match BHMA finish. Corbin Russwin Product Guide.17

18 CL3600 Series A mid-priced, heavy duty Grade 1 lever lockset, ideal for commercial, institutional and multi-family applications. Advantages Handed Solid cast levers No plastic inserts Independent return springs prevent lever sag Through-bolted cylindrical chassis Trim and keying compatible with other Corbin Russwin locksets 2-3/4" (70mm), 2-3/8" (60mm), 3-3/4" (95mm), and 5" (127mm) backsets available. 1/2" throw latchbolt accommodates 7/8" (22mm) and 1" (25mm) edge bore preps Through-bolts prevent chassis rotation; ensure proper alignment, smooth operation and long life Lever designs compatible with Corbin Russwin Mortise locks, Exit Devices and other Lever Locksets Handing Non-handed (except for CL3629, CL3680, CL3681, CL3690, CL3691; specify hand). Door Thickness 1-3/8" (35mm) to 2" (51mm) standard. Backset 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm), 3-3/4" (95mm), and 5" (127mm). Lock Chassis Stainless steel and steel, zinc dichromated for corrosion resistance. Front Wrought brass or bronze. 2-1/4" (57mm) x 1-1/8" (29mm) for 2-3/4" (70mm) backset; 2-1/4" (57mm) x 1" (25mm) for 2-3/8" (60mm) backset. Accommodates flat doors and doors beveled 1/8" (3mm) in 2"(51mm). Latchbolt Brass, chrome plated with 1/2" (13mm) throw. Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike Wrought brass or bronze ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Interchangeable core (IC) Pyramid Pyramid IC Security Security IC Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 1. Meets A117.1 Accessibility Code of the ADA. Federal Meets FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL / ULC All locks listed for A label and lesser class single doors, 4' x 10'. Finishes BHMA 605, 606, 611, 612, 613, 625, 626. Zinc levers are plated to match BHMA finish. Corbin Russwin Product Guide.18

19 CL3900 Series An economical, Grade 2 standard duty lever lockset, ideal for light commercial applications. Anti-rotation through- bolting ensures proper alignment and trouble free operation Advantages Solid cast levers. ANSI Grade 2 certification. UL 3-hour fire rating. Independent lever return springs. Through-bolts on door for solid attachment. Cover ANSI/DHI Door Prep A Spider Cut Out. Patented Lever Release for vandal resistance. 1/2" throw stainless steel latchbolt Multiple keying options Corbin Russwin 6-pin standard and removable core Handing Non-handed. Door Thickness 1-3/8" (35mm) to 1-3/4" (44mm) standard. Optional: 2" (51mm) to 2-1/4" (57mm) Backset 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm). Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Standard: 2-1/4" (57mm) x 1-1/8" (29mm), square corner, beveled, for 2-3/4" (70mm) backset or 2-1/4" (57mm) x 1" (25mm) square corner, beveled, for 2-3/8" (60mm) backset. Latchbolt 1/2" (13mm) throw. Auxiliary Latchbolt Deadlocking latchbolt prevents manipu-lation when door is closed. Strike ANSI curved lip strike standard. 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Interchangeable core (IC) Pyramid Pyramid IC Security Security IC Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 2. Meets A117.1 Accessibility Code of the ADA. Federal FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL / ULC All locks listed for B label Single doors. UL symbol on latch front indicates listing. Finishes BHMA 605, 606, 611, 612, 613, 625 & 626. Zinc levers are plated to match BHMA finish. Corbin Russwin Product Guide.19

20 CL3700 Series An economical, Grade 2 light/medium duty lever lockset, ideal for light commercial and heavy-duty residential applications. 1/2" throw stainless steel latchbolt Advantages Patented Lever Release design for vandal resistance ANSI Grade 2 certification. UL 1-1/2 hour fire rating. Interlocking tubular chassis and latchbolt. Designed and manufactured in an ISO 9001 facility. Multiple keying options Corbin Russwin 6-pin standard and removable core Handing Right or left hand must be specified for Frascati CL3750, 3755, 3759 and Door Thickness 1-3/8" (35mm) to 1-3/4" (44mm) standard. Backset 2-3/4" (70mm) standard. Optional: 2-3/8"(60mm). Lock Chassis Die cast zinc for corrosion resistance. Front Wrought brass or bronze. 2-1/4" (57mm) x 1-1/8" (29mm) for 2-3/4" (70mm) backset; 2-1/4" (57mm) x 1" (25mm) for 2-3/8" (60mm) backset. Accommodates flat doors and doors beveled 1/8" (3mm) in 2"(51mm). Latchbolt 1/2" (13mm) throw. Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike T-Strike is standard. Optional strikes, lip lengths and ANSI wrought strike box available. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Pyramid Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 2. Meets A117.1 Accessibility Code of the ADA. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL / ULC All locks listed for B label Single doors. UL symbol on latch front indicates listing. Finishes BHMA 605, 606, 612*, 613*, 625 & 626*. Zinc levers are plated to match BHMA finish. *Simulated painted finish meeting ANSI standards for wear and durability. Corbin Russwin Product Guide.20

21 CL3200, 3300, 3600, 3700 & 3900 Series Type ANSI CL3200 CL3300 CL3600 CL3700 CL3900 Function Description Passage or Closet Privacy Bedroom or Bathroom Deadlock F75 CL3210 CL3310 CL3610 CL3710 CL3910 F76 CL3220 CL3230 CL3320 CL3620 Hotel or Motel F93 CL3329 CL3629 Institution or Utility Patio or Privacy F87 CL3332 F77 CL3340 Communicating F80 CL3362 CL3962 Entrance or Office Entrance or Office F109 CL3251 CL3351 CL3651 CL3751 CL3951 F82 CL3261 CL3361 CL3661 Classroom F84 CL3255 CL3355 CL3655 CL3755 CL3955 Storeroom or Closet Barrier-Free Storeroom or Closet F86 CL3257 CL3357 CL3657 CL3957 F86 CL3257 CL3659 CL Latchbolt by lever either side. - Both levers always free. - Latchbolt by lever either side. - Outside lever locked by push or turn button. - Outside lever unlocked by emergency release tool outside, by rotating inside lever or by closing door. (CL3320, CL3620, CL3920 only) - Inside lever always free. - Throw-off latchbolt by lever inside or by key outside. - Push button shuts out all keys except emergency key and projects occupancy indicator in face of cylinder. - Push button released by turning inside lever or by closing door. - Outside lever always locked. - Inside lever always free. - When ordering, specify hand. - Deadlocking latchbolt by key either side. - Lever handle is freewheeling in locked position. - Throw-off latchbolt by lever either side. - Outside lever locked by push button. Lever handle is freewheeling in locked position. - Outside lever unlocked by rotating inside lever or by closing door. - Inside lever always free. - Should not be used in rooms that have no other entrance. - Deadlocking latchbolt by lever either side, except when key in either lever locks and unlocks the lever independently of the other. (Lever handle is freewheeling in locked position.) - Keyed alike unless otherwise specified. - Should be used only in office or room with multiple entries. - Latchbolt by lever either side, except when turn button locks outside lever. - Pushing in and turning button locks outside lever, requiring key at all times. Turning inside lever does not unlock outside lever until button is manually turned to unlocked position. (CL3351, CL3651, CL3951). - Key outside retracts latchbolt. - Inside lever/knob always free. - Deadlocking latchbolt by lever either side, except when turn button locks outside lever. - Push button released by turning inside lever or by key in outside lever. - Closing door does not release push button. - Inside lever/knob always free. - Latchbolt by key in outside lever or by rotating inside lever. - Outside lever always rigid, unless freewheeling - CL3355, CL Inside lever always free. - Deadlocking latchbolt by lever either side, except when key outside locks outside lever. - Outside lever unlocked by key outside. - Inside lever always free. - Deadlocking latchbolt by lever inside. - Key outside unlocks outside lever to retract latchbolt. - Key is retained in the unlocked mode. - When key is removed, outside lever is locked. - Inside lever is always free. Corbin Russwin Product Guide.21

22 CL3200, 3300, 3600, 3700 & 3900 Series Type ANSI CL3200 CL3300 CL3600 CL3700 CL3900 Function Description Apartment, Exit or Public Toilet F88 CL3372 CL Deadlocking latchbolt by lever either side, except when key locks outside lever. - Key outside retracts latchbolt. - Key inside unlocks outside lever. - Inisde lever always free. - Keyed alike unless otherwise specified. Dormitory F90 CL3975 Passage Lever x Blank Plate CL3380 CL3680 CL Deadlocking latchbolt by lever either side, except when pushbutton or key locks outside lever. - Pushbutton released by turning inside lever, by closing door, by 1/4 counter clockwise turn of key in outside lever, or by key in outside lever. If pushbutton is held in, outside lever will retract latchbolt. - Inside lever always free. - Deadlocking latchbolt by lever. - Lever on one side; blank plate on other side. - Lever always free. - When ordering, specify hand from lever side. - For single or double communicating doors. Keyed Lever x Blank Plate CL3381 CL3681 CL Deadlocking latchbolt by lever, except when lever is locked by key. - Lever on one side; blank plate on other side. - When ordering, specify hand from lever side. Store Door F91 CL Deadlocking latchbolt by lever either side, except when key either side locks both levers. - Keyed alike unless otherwise specified. Passage lever x Turnpiece Keyed Lever x Turnpiece CL3390 CL3690 CL3391 CL Latchbolt by lever or by turnpiece. - Lever on one side; turnpiece on other side. - Lever and turnpiece always free. - When ordering, specify hand from lever side. - Deadlocking latchbolt by lever or turnpiece, except when lever is locked by key. - When lever is locked, latchbolt is operated by key in lever or by turnpiece. - Lever on outside; turnpiece on inside. - Turnpiece always free. - When ordering, specify hand from lever side. Service Station F92 CL Throw-off latchbolt by lever either side. - Outside lever locked by slotted push button. - Outside lever unlocked by rotating inside lever or by closing door. - When slotted push button is pushed in and turned, outside lever becomes rigid and deadlocking latch is activated. - Outside lever is unlocked by using key or by rotating inside lever. - Inside lever always free. Half Dummy Trim Full Dummy Trim CL3250 CL3350 CL3650 CL3750 CL Lever acts as pull only; no operation. CL3270 CL3370 CL Levers act as pull only; no operation. Classroom Intruder F110 CL Deadlocking latchbolt by lever either side, except when key inside or outside locks outside lever. - Outside lever is free wheeling in locked position. - Inside lever always free. Corbin Russwin Product Guide.22

23 CL3200, 3300, 3600, 3700 & 3900 Series CL3200 Series CL3300 Series Armstrong Newport Armstrong Newport Princeton 3-1/2 (89) 3-1/2 (89) 3-1/2 (89) 3-1/2 (89) 3-1/2 (89) ASD 2-11/16 (68) 4-11/16 (119) Lever: Forged brass or cast stainless steel Rose: Forged brass or cast stainless steel NSD CL3600 Series Armstrong Newport 2-11/16 (68) 5 (127) Lever: Forged brass or cast stainless steel Rose: Forged brass or cast stainless steel AZD 2-13/16 (71) 4-5/8 (117) Lever: Die cast zinc Rose: Wrought NZD CL3900 Series Armstrong 2-13/16 (71) Lever: Die cast zinc Rose: Wrought Newport 5 (127) PZD 2-13/16 (71) 4-5/8 (117) Lever: Die cast zinc Rose: Wrought Princeton 3-1/2 (89) 3-1/2 (89) 3-1/2 (89) 3-1/4 (83) 3-1/2 (89) 2-13/16 (71) 4-1/2 (114) 2-13/16 (71) 4-1/2 (114) 2-13/16 (71) 4-1/2 (114) 2-13/16 (71) 4-1/2 (114) 3-1/2 (89) 5-1/2 (138) AZD Lever: Die cast zinc Rose: Wrought brass or bronze CL3700 Series Newport Lever: Die cast zinc NZD Rose: Wrought brass or bronze Princeton AZD Lever: Die cast zinc Rose: Wrought brass or bronze NZD Lever: Die cast zinc Rose: Wrought brass or bronze Frascati PZD Lever: Die cast zinc Rose: Wrought brass or bronze 2-9/16 (65) 2" 2" NZD Lever: Die cast zinc Rose: Brass 2-7/16 (62) 4-3/4 (121) PZD Lever: Die cast zinc Rose: Brass 2" 4" (108) FZD Lever: Die cast zinc Rose: Brass 2" 4" (108) Corbin Russwin Product Guide.23

24 CK4200 Series Ideal for demanding, high-use commercial, industrial and institutional applications. Advantages Patented Lock-on rose liners and thimble increase security and prevent lock from loosening. 1-3/4" (44mm) knob shank minimizes wear. 5/8" (16mm) latch and concealed knob catch enhance strength and security. Internal parts are zinc dichromate plated for rust resistance 5/8" (16mm) throw latchbolt 1-3/4" (44mm) knob shanks enhance stability and minimize wear Heavy wrought knobs with steel liner for impact resistance Handing Field reversible. Door Thickness 1-3/8" (35mm)- 1-3/4" (44m) standard. Backset 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5" (127mm) and 7" (178mm). Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Wrought brass, bronze or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt Brass, chrome plated 5/8" (16mm) throw, with nylon insert. Strike Wrought brass or bronze, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Cylinder Brass, 6-pin interchangeable core (IC), L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Security Interchangeable core (IC) Pyramid Pyramid IC Security IC Master ring Keys Two nickel-silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 1. Federal Meets FF-H-106C. UL/ULC All locks listed for A label and lesser class single doors, 4' x 8'. Letter F and UL symbol on latch front indicate listing. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629, 630. Corbin Russwin Product Guide.24

25 CK4400 Series An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings. Advantages Wide array of functions. Precision manufactured mechanisms, zinc dichromated for corrosion resistance. Stainless steel latchbolt for long life. Adjustable latchbolt accommodates flat and beveled doors. Stainless steel trim available. Inside rose liner throughbolted to lock chassis to ensure proper alignment and smooth operation Knob designs compatible with Corbin Russwin Pre-Assembled Unit Locks, Mortise Locksets, Exit Devices and other Cylindrical Locks 2-3/8" (60mm), 2-3/4" (70mm), 3-3/4" (95mm), & 5" (127mm) backsets available Handing Field reversible. Door Thickness 1-3/8" (35mm) to 1-3/4" (44mm) standard. Backset 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5" (127mm). Lock Chassis Steel, zinc dichromated for corrosion resistance. Front Wrought brass, bronze or stainless steel. 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt Brass, chrome plated with 1/2" (13mm) throw. Strike Wrought brass, bronze or stainless steel, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 2. Federal Meets FF-H-106C. UL/ULC All locks listed for A label and lesser class single doors, 4' x 8'. Letter F and UL symbol on latch front indicate listing. Finishes BHMA 605, 612, 613, 629, 630. Corbin Russwin Product Guide.25

26 CK4700 Series An economical, Grade 2 light/medium-duty knob lockset, ideal for light commercial and heavy-duty residential applications. CK4200 Series Global Brass, bronze or stainless steel Belmont Brass, bronze or stainless steel Advantages ANSI Grade 2 certification. UL 1-1/2 hour fire rating. Interlocking tubular chassis and latchbolt. ISO 9001 designed and manufactured in a certified 9001 facility. GRC GRD GRE GRC Knob: Wrought reinforced Rose: Wrought reinforced Knob: Wrought reinforced Rose: Wrought reinforced 3 1 /2" (89mm) Dia. Knob: Wrought reinforced Rose: Wrought reinforced 3" (76mm) Sq. BRC BRD BRE BRC Knob: Wrought reinforced Rose: Wrought reinforced Knob: Wrought reinforced Rose: Wrought reinforced 3 1 /2" (89mm) Dia. Knob: Wrought reinforced Rose: Wrought reinforced 3" (76mm) Sq. 1/2" throw stainless steel latchbolt Handing Non-handed. Door Thickness 1-3/8" (35mm)- 1-3/4" (44mm) standard. Backset 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm). Lock Chassis Die cast zinc dichromated for corrosion resistance. Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike T-Strike standard. Optional strikes, lip lengths and ANSI wrought strike box available. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Multiple keying option including Corbin Russwin standard and interchangeable core cylinders and cylinders with Schlage C keyway. Keying Available Master keying Construction master keying Visual key control Concealed key control Pyramid Keys Two nickel-silver standard. Warranty One-year limited. Certification/Compliance ANSI (lever) Meets A156.2 Series 4000, Grade 2. Federal Meets FF-H-106C. UL/ULC All locks listed for B label single doors. UL symbol on latch front indicates listing. Finishes BHMA 605 and 626. CK4400 Series Global Brass, bronze or stainless steel GWC Knob: Wrought Rose: Wrought reinforced CK4700 Series Global Brass GWC Lever: Brass Rose: Brass Belmont Brass, bronze or stainless steel BWC Knob: Wrought Rose: Wrought reinforced Corbin Russwin Product Guide.26

27 CK4200, CK4400 & CK4700 Functions Type ANSI CK4200 CK4400 CK4700 Function Description Passage or Closet F75 CK4210 CK4410 CK Latchbolt by knob either side. - Both knobs always free. Privacy, Bedroom or Bathroom F76 CK CK Latchbolt by knob either side. - Outside knob locked by push button. - Emergency release in outside knob. - Outside knob unlocked by emergency release tool outside, by rotating inside knob or by closing door. - Inside knob always free. Hotel or Motel F93 CK4229 CK Deadlocking latchbolt by knob inside or by key outside. - Push button shuts out all keys except emergency key and projects occupancy indicator in face of cylinder. - Push button released by turning inside knob or by closing door.* - Outside knob always rigid. - Inside knob always free. Privacy, Bedroom or Bathroom F76 CK4230 CK Deadlocking latchbolt by knob either side. - Outside knob locked by pushbutton. - Outside knob unlocked by turning slotted button outside, by rotating inside knob, or by closing door. - Inside knob always free. Institutional or Utility F87 CK Deadlocking latchbolt key either side. - Both knobs always rigid. Patio or Privacy F CK Deadlocking latchbolt by key either side, except when turn or push button locks outside knob. - Push button released by turning inside knob or by closing door. - Inside knob always free. Entrance or Office F81/F82 CK4251 CK4261 CK4451 CK Deadlocking latchbolt by knob either side, except when turn or push button locks outside knob. - Pushing in and turning button locks outside knob, requiring key at all times. Turning inside knob does not unlock outside knob until button is manually turned to unlocked position. (CK4451 only) - Key outside retracts latchbolt. (CK4251) - Outside knob unlocked by turn button. (CK4251) - Turning inside knob unlocks outside knob. (CK4451 only) - Inside knob always free. Classroom F84 CK4255 CK4455 CK Deadlocking latchbolt by knob either side, except when key outside locks outside knob. - Outside knob unlocked by key outside. - Inside knob always free. Storeroom or Closet Barrier-Free Storeroom or Public Restroom Office or Privacy Apartment Exit Public Toilet Communicating or Exit Dormitory Store Door Half Dummy Trim Full Dummy Trim F86 F86 F82 F F CK CK4261 CK CK4275 CK4282 CK CK CK4482 CK4250 CK4450 CK CK Deadlocking latchbolt by key in outside knob or by rotating inside knob. - Outside knob always rigid. - Inside knob always free. - Deadlocking latchbolt by key in outside knob or by rotating inside knob. - Key outside unlocks outside knob to retract latchbolt. Key is retained in the unlocked mode when key is removed, outside knob is locked. - Inside knob always free. - Deadlocking latchbolt by knob either side, except when push button locks outside knob. - Push button released by turning inside knob or by key in outside knob. - Closing door does not release push button. - Inside knob always free. - Deadlocking latchbolt by knob either side, except when key inside locks outside knob. - Key outside retracts latchbolt. - Key inside unlocks outside knob. - Inside knob always free. - Key alike unless otherwise specified. - Deadlocking latchbolt by knob outside only. - Blank rose inside; no inside operation. *Unless push button has been fixed in locked position by spanner key (furnished). When push button is fixed by spanner key, lock is operable only by emergency key or by display key. - Deadlocking latchbolt by knob either side, except when push button or key locks outside knob. - Push button released by turning inside knob, by closing door, by 1/4" counter clockwise turn of key in outside knob, or by key in outside knob. If push button is held in locked position, key in outside knob will retract latchbolt. - Inside knob always free Deadlocking latchbolt by knob either side, except when key either side locks both knobs. (CK4282, CK4482) - Keyed alike unless otherwise specified. CK Knob acts as pull only; no operation Knobs act as pulls only; no operation. Corbin Russwin Product Guide.27

28 UT5200 Series Its pre-assembled, unitized construction is ideal for hightraffic commercial, institutional and industrial applications. Advantages Factory pre-assembled for quick, economical, onepiece installation; no job site assembly required. 3/4" (19mm) radius latchbolt, designed to wedge more tightly into the strike when tampered with, while meeting all ADA force-to-latch requirements. Precision-machined internal parts ensure smooth operation and long life Installation of pre-assembled lockset requires only tightening three throughbolts, significantly reducing costs and potential for error 3/4" (19mm) throw latchbolt provides security and meets all force-tolatch requirements Conventional, highsecurity, interchangeable core and master ring cylinder available for keying flexibility Handing Specify hand. Door Thickness 1-3/4" (44m) only. Backset 2-3/4" (70mm) only. Lock Chassis One-piece investment cast frame. Zinc dichromated. Auxiliary Latchbolt Deadlocking latchbolt prevents manipulation when door is closed. Strike T-Strike standard. Optional strikes, lip lengths and ANSI wrought strike box available. Front Beveled 1/8" (3mm) in 2" (51mm). Latchbolt Brass, chrome plated 3/4" (19mm) throw pivoted swinging type. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keying Available Master keying Construction master keying Visual key control Concealed key control Interchangeable core (IC) Security Pyramid Pyramid IC Security IC Master ring Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance ANSI Meets A156.2 Series Meets A117.1 Accessibility Code of the ADA (lever design only). Federal Meets FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL/ULC All locks listed for A label and lesser class single or pair, maximum door size 3'8" x 7'2". Finishes BHMA 612, 613, 625, 626. Corbin Russwin Product Guide.28

29 UT5200 Series Trim Designs Essex Brass Global Brass Belmont Brass 4-1/8 (105) 4-1/8 (105) ESE 3-1/8 (79) 2-7/16 (62) 5-5/16 (117) Knob: Wrought Rose: Wrought reinforced GRE 3-1/8 (79) 2-3/4 (70) 2-1/4 Knob: Wrought Rose: Wrought reinforced BRE Knob: Wrought Rose: Wrought reinforced UT5200 Functions Type Passage or Closet ANSI F36 UT5200 UT5210 Function Description - Latchbolt by grip either side. - Both grips always free. Privacy, Bedroom or Bathroom F37 UT Latchbolt by grip either side. - Outside grip locked by push button. - Outside grip unlocked by emergency release tool outside or by rotating inside grip or by closing door. - Inside grip always free. Entrance or Office (Levers Only) F41 UT Deadlocking latchbolt by lever either side, except when turn button locks outside lever. - Push button released by turning inside lever or by key in outside lever. - Closing door does not release push button. - Inside lever always free. Classroom F42 UT Deadlocking latchbolt by grip either side, except when key outside locks outside grip. - When outside grip is locked, latchbolt is operated by key outside or by rotating inside grip. - Inside grip always free. Storeroom or Closet F44 UT Deadlocking latchbolt by key in outside grip or by rotating inside grip. - Outside grip always rigid. - Inside grip always free. Entrance or Office F40 UT Deadlocking latchbolt by grip either side, except when turn button locks outside grip. - Key outside retracts latchbolt. - Outside grip unlocked by burn button. - Inside grip always free. Apartment, Exit or Public Toilet Store Door F45 F46 UT5272 UT Deadlocking latchbolt by grip either side, except when key inside locks outside grip. - Key outside retracts latchbolt. - Key inside unlocks outside grip. - Inside grip always free. - Keyed alike unless otherwise specified. - Deadlocking latchbolt by grip either side, except when key either side locks both grips. - Keyed alike unless otherwise specified. Corbin Russwin Product Guide.29

30 Padlocks, Deadlocks Padlocks PL5000 Series Case Extruded brass. Shackle Hardened steel or brass. Locking Conventional model: latching at toe. IC model: ball-bearing locking heel and toe. Cylinder Conventional model: nonremovable 6-pin, L4 keyway. IC model: Interchangeable core. Keying Available Master keying Construction master keying Interchangeable core (IC) 6-pin IC Pyramid IC Security IC Concealed key control Visual key control (not for HS) Non-assembled Keys Two nickel silver standard. Warranty One-year limited. Finish BHMA 606 Satin Brass. Cylindrical Deadbolt DL2100 Series Handing Non-handed. Door Thickness Standard: 1-3/4" (44mm)- 2" (51mm). Backset Standard: 2-3/4" (70mm). Can be ordered 2-3/8" (60mm). Cylindrical Deadbolt DL3100 Series Handing Non-handed. Door Thickness Standard: 1-3/4 " (44mm) - 2 (51mm). Backset Standard: 2-3/4" (70mm). Can be ordered 2-3/8" (60mm). Front Standard: wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (28mm). Front Standard: wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (28mm). Deadbolt Brass bolt with hardened steel 1" (25mm) throw. Strike Standard: wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (28mm). Deadbolt Stainless steel with hardened steel insert; 1" (25mm) throw. Strike Standard: wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (28mm). Cylinder Standard: brass, 6-pin, L4 keyway, O-bitted. Keying Available Master keying Construction master keying 7-pin conventional Pyramid IC Cylinder Standard: brass, 6-pin, L4 keyway, O-bitted. Keying Available Master keying Construction master keying Security Visual key control Concealed key control Keys Two nickel silver standard. Warranty One-year limited. Interchangeable core (IC) Security Security IC Visual key control Concealed key control Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance UL Ul10B Fire-Rated Auxiliary Lock for A label and lesser class doors when used with a correspondingly rated primary latching device. Corbin Russwin Product Guide.30

31 Deadlocks, Push-Pull Latches Cylindrical Deadlocks DL3000 Series Handing Non-handed, except DL3017, which is handed and field reversible. Door Thickness Standard: 1-3/4" (44mm). Optional door thicknesses available; see Quick Codes. Backset 2-3/4" (70mm) and 2-3/8 (60mm). Front Wrought brass or bronze, 2-1/4" (57mm) x 1-1/8" (28mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Deadbolt Zinc die cast with hardened steel insert; 1" throw. Strike Wrought brass or bronze, 2-3/4" (70mm) x 1-1/8" (28mm). Optional strikes and wrought boxes available. Cylinder 6-pin, L4 keyway, O-bitted. Keying Available Master keying Construction master keying 7-pin conventional Interchangeable core (IC) Security Security IC Pyramid Pyramid IC Visual key control Concealed key control Keys Two nickel silver standard. Warranty One-year limited. Mortise Deadlocks DL4000 Series Handing Non-handed. Door Thickness Standard: 1-3/4" (44mm). Backset 2-3/4" (70mm). Lockcase Wrought steel; gold lacquer finish. Push-Pull Latches HL10 Series Handing Non-handed. Door Thickness 1-3/4" (44mm). Backset 5" (127mm). Front Wrought brass or bronze standard. 2-1/4" (57mm) x 1-1/8" (28mm). Accommodates doors Front Wrought brass or bronze, 3-1/2" (89mm) x 1-1/8" (28mm). Cylinder 6-pin, L4 keyway, O-bitted. Keying Available Master keying Construction master keying 7-pin conventional Interchangeable core (IC) beveled 1/8" (3mm) in 2" (51mm). Latchbolt Brass, chrome plated, 5/8" (16mm) throw. Strike Wrought brass or bronze, curved lip box standard. 2-3/4" (70mm) x 1-1/8" (28mm) x 1-1/4" (32mm) lip to center. Security Security IC Pyramid Pyramid IC Visual key control Concealed key control Keys Two nickel silver standard. Warranty One-year limited. Certification/Compliance UL Listed for A label and lesser class single doors. Letter F and UL symbol on latch front indicate listing. Finishes BHMA 612, 625, 626 Corbin Russwin Product Guide.31

32 ED6000 Series Ideal for high-use situations. Advantages Meets ANSI Grade 1 requirements. Heavy-duty construction. Base metals (brass, bronze and stainless steel) for durability. Easy-to-use crossbar operation for quick egress and ADA compliance. Dogging standard on all panic-listed devices. Through-bolted trims for strength and security. Wide range of finishes, trims and styles to match other Corbin Russwin products. Devices available to satisfy panic and fire opening requirements. Trims Lever, knob, thumbpiece, pull and operator escutcheonal trims available. Consult ED6000 catalog for complete listing of designs and functions. Belmont B3 Lustra L3 Round Grip T4 D Grip Sectional T5 Bar Length Easily field cut to size. Standard 36" (914mm) bar fits doors up to 36" (914mm). Optional 48" bar fits 36-1/2" (927mm) - 48" (1219mm) door. Door Thickness Standard: 1-3/4" (44mm). Stile (Rim) Minimum width with 1/2" (13mm) stop and standard strike: 4" (102mm). With 5/8" (16mm) stop and standard strike: 4-1/8" (105mm). Projection 5-3/4" (146mm); 4-1/2" (114mm) depressed. Cases Heavy wrought, 7-1/4" (184mm) x 2-9/16" (65mm). Crossbar Standard: 13/16" (21mm) x 1-3/8" (35mm) oval seamless tubing. Warranty One-year limited. Electromechanical Available with ED6600 and ED6600A devices. Certification/Compliance ANSI Meets A156.3, Grade 1. Meets A117.1 Accessibility Code. UL / cul All exit devices listed for safety as panic hardware. 3-hour fire-rated devices listed as fire exit hardware for A label and lesser class hardware. California State Reference Code NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act. Finishes BHMA 605, 606, 611, 612, 613, 622, 625, 626, 629, 630. ED6800 Series Exit Devices - Concealed Vertical Rod, Panic & Fire Labeled (not pictured) ED6400 Series Exit Devices - Surface Vertical Rod, Panic and Fire Labeled ED6600 Series Mortise Lock Type Exit Devices - Panic and Fire Labeled ED6200 Series Rim Exit Devices - Panic & Fire Labeled Refer to appropriate Exit Device Catalog for a complete listing of each series applications. Corbin Russwin Product Guide.32

33 ED7000 Series - Narrow Stile Ideal for high-use situations on narrow and regular stile doors in new construction and renovations. Advantages Meets or exceeds ANSI Grade 1 requirements. Heavy-duty construction. Base metals (brass, bronze and stainless steel) for durability. Easy-to-use crossbar operation for quick egress and ADA compliance. Dogging standard on all panic listed devices. Through-bolted trims for strength and security. Wide range of finishes, trims and styles to match other Corbin Russwin products. Devices available to satisfy panic and fire opening requirements. Trims Lever, knob, thumbpiece, pull and operator escutcheonal trims available. Consult ED7000 catalog for complete listing of designs and functions. Bar Length Easily field cut to size. Standard 36" bar fits doors up to 36" (914mm). Optional 48" (1219mm) bar fits 36-1/2" (927mm) - 48" (1219mm) door. Door Thickness Standard: 1-3/4" (44mm). Stile (Rim) Minimum width 2-1/2" (64mm) with standard 1/2" (13mm) stop. Projection 4-7/8" (124mm); 3-1/8" (80mm) depressed. Cases Heavy cast, 7-1/4" (184mm) x 1-1/4" (32mm). Crossbar Standard: 13/16" (21mm) x 1-3/8" (35mm) oval seamless tubing. Warranty One-year limited. Certification/Compliance ANSI Meets A156.3, Grade 1. Meets A117.1 Accessibility Code. UL / cul All exit devices listed for safety as panic hardware. 3-hour fire rated devices listed as fire exit hardware for A label and lesser class hardware. California State Reference Code NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act. Finishes BHMA 605, 606, 611, 612, 613, 622, 625, 626, 629, 630. Dirke D4 D Grip Operator 03 Round Grip T12M ED7800 Series Exit Devices - Concealed Vertical Rod, Panic & Fire Labeled (not pictured) ED7400 Series Surface Vertical Rod Exit Devices - Panic Only ED7200 Series Rim Exit Device - Panic Only ED7600 Series Mortise Lock Type Exit Devices - Panic and Fire Labeled Refer to appropriate Exit Device Catalog for a complete listing of each series applications. Corbin Russwin Product Guide.33

34 ED8000 Series Ideal for high-use situations in new construction and renovations. Advantages Meets ANSI Grade 1 requirements. Heavy-duty steel construction. Easy-to-use pushbar operation for quick egress and ADA compliance. Low profile and projection for barrier-free code compliance. No projecting parts to inhibit egress. Through-bolted trims for strength and security. Variety of finishes, trims and styles to match other Corbin Russwin products. Trims Key-in-lever, key-in-knob and pull trims available in five functions. Consult ED8000 catalog for complete listing of designs and functions. Princeton PR6 Global G10 Wing Pull P8 Bar Length Easily field cut to size. Standard 36" bar fits doors 31" (787mm) - 36" (914mm). Door Thickness Standard: 1-3/4" (44mm). Backset 2-3/4" (70mm) for 5/8" (16mm) stop. Device and trim cover standard ANSI A115.2 (Type 161) cylindrical lock preparation. Stile Minimum width 5" (127mm). Projection 2-1/2" (64mm). Latchbolt (Rim) 3/4" (19mm) stainless steel pullman type with stainless steel deadlocking latch. Alarm Kit Optional on ED8200(B) devices; emits audible alarm, signaling emergency or unauthorized use of door. Available in kit form or factory installed. Dogging Standard on ED8200 and ED8400 devices. Fasteners Standard: machine screws. Cylinder Optional, when specified. Warranty One-year limited. Certification/Compliance ANSI Meets A156.3, Grade 1. Meets A117.1 Accessibility Code. UL / cul All exit devices listed for safety as panic hardware. 3 hour fire-rated devices listed as fire exit hardware for A label and lesser class. 1-1/2 hour fire-rated devices listed as fire exit hardware for B label and lesser class. WHI (Warnock Hersey International) - Rim Only 1-1/2 hour fire-rated devices listed for B label and lesser class 4' x 8' single or 8' x 8' double doors. Rear cover label indicates listing. California State Reference Code NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act. Finishes BHMA 689, 690, 691, 605, 606, 611, 612, 613, 622, 625, 626. Painted finishes on devices. Painted or plated finishes available on trims. ED8400 Series Exit Devices - Surface Vertical Rod, Panic & Fire Labeled. Refer to appropriate Exit Device Catalog for a complete listing of each series applications. ED8200 Series Exit Devices - Panic & Fire Labeled Corbin Russwin Product Guide.34

35 ED5000 Series Designed for applications in high use situations, ideal for new construction and renovations. Advantages Meets ANSI Grade 1 requirements Easy-to-use pushbar for quick egress and ADA compliance Heavy-duty construction Quiet operation Low projection for barrier-free code compliance Closed on all sides - no projection parts to inhibit egress Wide range of finishes, trims, and styles to match other Corbin Russwin products. Through-bolted trims for strength, security, durability, smooth operation and easy installation One-point dogging on panic devices Devices available to satisfy UL safety and fire label requirements ED5200 Series Rim and SecureBolt Exit Devices - Panic & Fire Labeled, Metal and Wood Doors. (Rim not pictured) ED5400 and ED5470 SVR Series Exit Devices - Surface Vertical Rod, Up to 10', Panic & Fire Labeled, Less Bottom Rod, Metal & Wood Doors Bar Length Easily field cut to size. Standard 36" (914mm) bar fits 30" (762mm) - 36" (914mm) door. Optional 48" (1219mm) bar fits 36" (914mm) - 48" (1219mm) door, 24" (610mm)bar fits 24" (610mm) - 30" (762mm) door. Door Thickness 1-3/4" (44mm) standard. Stile Minimum width 4-1/2" (114mm). Projection 3-1/4" (83mm) active, 2-3/4" (70mm) dogged. Warranty Five-year limited on devices and 9 series trim. One-year limited on 7 series trim and electronic components. Certification/Compliance ANSI Meets ANSI 156.3, Grade 1. Meets A117.1 Accessibility Code. UL/cUL All exit devices listed for safety as panic hardware. 3- hour fire rated devices listed as fire exit hardware for A label and lesser class. 1-1/2 hour fire rated devices listed as fire exit hardware for B label and lesser class. California State Reference Code This product has been approved by the California State Fire Marshal pursuant to section of the California Health & Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629, 630. ED5000 Up to 10' Fire Rated Exit Devices ED5800 and ED5860 CVR Series Exit Devices - Concealed Vertical Rod, Up to 10', Panic & Fire Labeled, Less Bottom Rod, Metal & Wood Doors (not pictured) Refer to appropriate Exit Device Catalog for a complete listing of each series applications. ED5600 Mortise Lock Type Exit Devices - Panic & Fire Labeled, Metal & Wood Doors The ED5000 Series meets the 1-1/2 Hour UL B Fire Rating standards for surface vertical rod, concealed vertical rod, and less bottom rod applications on doors up to 10'. Advantages Less bottom rod devices eliminate catch hazards and prevent damage to bottom rods Two-point latch surface and concealed vertical rod devices useful in higher security situations Less bottom rod devices provide code compliance without a floor strike UL listings for fire doors up to 4' x 10' (8' x 10' pairs) SVR less bottom rod devices are ADA compliant Corbin Russwin Product Guide.35

36 ED5000 Series Removable Mullions Used to install two rim exit devices in a double door opening. May be quickly and easily removed when a full double door opening is temporarily required. Key removable option (KM) and retrofit kits (KRM700A) are available. Prime coat grey painted BHMA 600. Available with mullion stabilizer kit. Mullion Stabilizer Kit Controls the movement of the mullion. Recommended for openings over 7' high, or whenever door movement must be minimized. Materials and Finish Tubular steel mullion, 1-1/2" (32mm) x 3" (76mm), with malleable iron top and bottom mounting plates; furnished with zinc plated fasteners for metal frames and concrete floors. May be cut, drilled and tapped in field for Rim Exit Devices. Prime coat gray painted BHMA 600. Maximum UL Listing Mullion Opening Height Part No. 3-Hour A 3-Hour A Panic Only Keyed Removable Mullion Angle Bracket (optional) Upper Mounting Bracket Steel Mullion Mullion Pad Lower Mounting Bracket ED5000 Series Trim 9 Series Heavy-Duty Trim Free-wheeling vandal resistant design Beveled edges Through-bolted to exit device Flush cylinder with 6-pin cylinder applications Available with Vineyard Collection levers Newport N9 Escutcheon F9 Frascati FR9 Merlot M9 Tuscany TS9 Zinfandel Z9 7 Series Trim Free-wheeling lever Through-bolts to exit device Welded posts Available with lever, knob, pull or thumbpiece designs Trim Functions Offset Pull P9 Dirke D7 Global G7 Type ANSI Function Passage - 10 Dummy F02 50 Classroom F08 55 Nightlatch F03 57 Storeroom F09 59 Refer to ED5000 catalog for a complete listing of trim designs and options. Corbin Russwin Product Guide.36

37 ED4000 Series - Narrow Stile Designed for narrow stile applications on full glass doors in high-use and high-abuse situations. Advantages Meets ANSI Grade 1 requirements Easy-to-use pushbar for quick egress and ADA compliance Heavy-duty construction Quiet operation Low projection for barrier-free code compliance. Closed on all sides - no projection parts to inhibit egress Wide range of designs and finishes to match other Corbin Russwin products Through-bolted trims for strength, security, durability, smooth operation and easy installation. One-point dogging on panic devices Trims Lever, knob, thumbpiece and operator trims available. Consult ED4000 catalog for a complete listing of designs and functions. Essex E8 Pull/Thumbpiece T14 ED4200 Series Rim and SecureBolt Exit Devices - Panic Only, (SecureBolt not pictured) ED4400 Series Exit Devices - Surface Vertical Rod, Panic Only ED4800 Series Exit Devices - Concealed Vertical Rod, Panic Only, Aluminum Store Front Door (not pictured) Plate x Thumbturn 08 Bar Length Easily field cut to size. Standard 36" (914mm) bar fits 30" (762mm)-36" (914mm) door. Optional 48" (1219mm) bar fits 36" (914mm) - 48" (1219mm) door, 24" (610mm) bar fits 24" (610mm)- 30" (762mm) door. Door Thickness 1-3/4" (44mm) standard. Stile Minimum width 2" (51mm) Projection 3-1/4" (83mm) active, 2-3/4" (70mm) dogged. Warranty Five-year limited on devices. One-year limited on trim. Removable Mullions Used to install two rim exit devices in a double door opening. May be quickly and easily removed when a full double door opening is temporarily required. Mullion stabilizer kit supplied standard. Aluminum mullion available in 628 and 695 finishes. Specify 808 x Finish. Certification/Compliance ANSI Meets ANSI 156.3, Grade 1. Meets A117.1 Accessibility Code. UL / cul All exit devices listed for safety as panic hardware. 3-hour fire-rated devices listed as fire exit hardware for A label and lesser class hardware. California State Reference Code This product has been approved by the California State Fire Marshal pursuant to section of the California Health & Safety Code. NFPA All exit devices comply with NFPA 101 Life Safety Code. ADA Exit devices, lever trims and pulls comply with Americans with Disabilities Act. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629, 630. Upper Mounting Bracket Extruded Aluminum Mullion Strikes (2) (Integral with Mullion) Mullion Stabilizers (2 Sets Standard) Lever Mounting Brackets Refer to appropriate Exit Device Catalog for a complete listing of each series applications. Corbin Russwin Product Guide.37

38 DC2000, DC3000 Series DC2000 Proven effective in high-use, high-abuse environments. Ensures reliable latching for access control and fire and barrier-free code compliance. Ideal for virtually all door openings and draft conditions in both new and retrofit construction. 10-year limited warranty. DC3000 The mid-priced, cost effective choice for high traffic situations. Ideal for both new construction and renovations while ensuring fire and barrier-free code compliance. 5-year limited warranty. Backcheck intensity valve with safety feature maintains safe internal pressure Tapered valves allow infinite adjustment for correct performance (latching speed, delayed action, backcheck intensity, closing speed) QUIK-INSTALL mounting bracket allows fast, accurate installation Multiple backcheck location valve permits choice of 70 o or 90 o backcheck setting on DC2000 only Optional delayed action valve offers adjustable timing for compliance with accessibility codes Closing speed valve Latching speed valve Spring DC2200 closers: multi-sized; fully adjustable 1 through 6. DC2400 closers: sizes 1 through 6; half-size adjustability. DC2600 closers: sizes 1 through 6: non-adjustable. DC3200 closers: multi-sized; fully adjustable 1 through 6. DC3600 closers: sizes 1 through 5; non-adjustable. Body Cast iron case with seamless onepiece forged steel spring tube. Arm Standard; heavy-duty forged steel. Spindle Triple heat treated steel. Piston Precision machined, heat treated steel. Springs Double heat treated steel, tempered. Backcheck Multiple backcheck location valve permits choice of 70 or 90 backcheck setting. DC2000 Series only. Valves Backcheck intensity valve with safety feature on DC2200, DC2400, DC2600, and DC3200 Series. Optional on DC3600 latching and closing speed standard all series, delayed action optional all series. Seals O-rings. Fluid High lubricity hydraulic fluid standard. Degree of Opening Up to full 180 opening standard for regular, top jamb and parallel arm mountings. Mounting Bracket QUIK-INSTALL mounting bracket standard. Warranty Five-year limited on DC3000. Ten-year limited on DC2000. Finishes BHMA 600, 689, 690, 691, 693, 696. Electromechanical Available with magnetic hold-open and smoke detector. Certifications/Compliance ANSI Meets A156.4, Grade 1. Meets A117.1 Accessibility Code. Federal Meets FF-H-121D, Type UL/ULC Listed for fire and cycle requirements. This includes conformance to UL10C and UBC Barrier-Free Code Compliance *Closers conform to the 5 lbf. maximum door opening force requirement for non-fire-rated interior hinged doors, according to: Americans with Disabilities Act (ADA) American National Standards Institute (ANSI) Corbin Russwin Product Guide.38

39 DC2000, DC3000 Series Advantages Meets or exceeds ANSI A156.4 Grade 1 requirements. Compliance with building and barrier-free codes. Up to full 180 door opening. Unique pressure-relief backcheck intensity valve includes safety feature to maintain correct internal pressure. One-piece seamless steel spring tube seals in hydraulic fluid. Cast iron body. QUIK-INSTALL mounting bracket speeds installation, reducing cost and errors. Ten-year limited warranty on DC2000 Series. Covers Full Cover Standard on all DC2000 and DC3000 Series Door Closers. Completely covers closer body. Reversible for regular and parallel arm mountings. For top jamb mounting, specify hand. 2-3/4" (70mm) x 11-9/16" (294mm) x 2-15/16" (75mm). Painted and plated finishes. Slim Cover Non-handed. Cap covers bottom of spindle. Optional for all DC2000 and DC3000 Series. 1-3/4" (44mm) x 2-3/4" (70mm) x 11-3/8" (289mm). Available in painted finishes. Full Metal Cover For use in high-abuse applications, such as schools and detention facilities. For all mountings, specify hand. 2-3/4" (70mm) x 11-7/16" (290mm) x 2-13/16" (71mm). Painted and plated finishes. Optional on DC2000 Series only. Corbin Russwin Product Guide.39

40 DC4600 Series Designed for light-duty applications, ideal for residences, offices and retail outlets. Advantages Universal mounting. Valve adjusts for closing and latching speeds. Allows full 180 door opening. Low projection - just 2-7/8" (73mm). 2-year limited warranty. Low projection Narrow width Universal mounting Single valve adjusts closing and latching speeds Spring Sizes 2, 3, 4 and 5 available, nonadjustable. Handing Universal, non-handed. Body Cast aluminum. Arm Standard: steel main arm and tubular steel turnbuckle frame. Spindle Precision machined steel. Piston Precision machined steel. Springs Tempered steel. Valve Standard: 2 closing speed valves adjust closing speed and latching speed. Backcheck intensity valve buffers door opening after 70. Seals O-rings. Fluid High lubricity hydraulic fluid standard. Degree of Opening Up to full 180 opening standard for regular, top jamb and parallel arm mountings, conditions permitting. Power Adjustment Arm Bracket 15% ± (7-1/2%) adjustment standard. Mountings Standard: regular and top jamb. Optional: paralled arm mounting. Fasteners Standard: machine screws and sheet metal screws are packed with all closers. Warranty Two-year limited. Certification/Compliance UL/ULC Listed for closers with non-hold open arms. This includes conformance to UL10C and UBC Finishes BHMA 600, 689, 690, 691, 693, 696. Corbin Russwin Product Guide.40

41 DC2000 Series Regular Arm DC2200-DC2400-DC2600 Used with regular arm mounting (pull side) and top jamb mounting (push side). Regular Arm with Hold Open* DC2200xA1-DC2400xA1-DC2600xA1 Permits door to remain in hold open position. Heavy-Duty Regular Arm DC2200xA10-DC2400xA10-DC2600xA10 Recommended for high-use, high-abuse environments. Parallel Arm DC2210-DC2410-DC2610 Regular arm plus parallel arm mounting bracket; mounted on push side. Parallel Arm with Hold Open* DC2210xA1-DC2410xA1-DC2610xA1 Permits door to remain in hold open position. Heavy-Duty Parallel Arm DC2210xA3-DC2410xA3-DC2610xA3 Recommended for high-use, high-abuse environments. * Not allowed by code on fire doors Corbin Russwin Product Guide.41

42 DC2000 Series Heavy-Duty Parallel Arm with Hold Open* DC2210xA2 - DC2410xA2 - DC2610xA2 Recommended for high-use, high-abuse environments. Heavy-Duty Reversible Backstop Parallel Arm DC2210xA4 - DC2410xA4 - DC2610xA4 Recommended for high-use, high-abuse environments. Heavy-Duty Reversible Backstop Parallel Arm with Hold-Open* DC2210xA5 - DC2410xA5 - DC2610xA5 Recommended for high-use, high-abuse environments. Heavy-Duty Spring Stop Parallel Arm DC2210xA11 - DC2410xA11 - DC2610xA11 Recommended for high-use, high-abuse environments. Heavy-Duty Spring Stop Parallel Arm with Hold Open* DC2210xA12 - DC2410xA12 - DC2610xA12 Same as spring stop above, with hold open. Pull Side Track Arm DC DC DC2630 Maximum 100 o opening. Pull Side Track Arm with Hold Open* DC2230xA1 - DC2430xA1 - DC2630xA1 Hold open can be set for 85, 90, 95, or 100. * Not allowed by code on fire doors Corbin Russwin Product Guide.42

43 DC2000 Series Push Side Track Arm DC DC DC2640 Provides a clean aesthetic look for doors opening a maximum of 100 and a minimum door width of 32" (813mm). Push Side Track Arm with Hold Open DC2240xA1 - DC2440xA1 - DC2640xA1 Same as Track Arm with the addition of hold open that may be positioned on door to allow hold open from 85 to 100. Top Jamb Deep Reveal Arm (3-3/8" - 7-1/4") DC2220xA6 - DC2420xA6 - DC2620xA6 Accommodates top jamb mounting for reveals up to 7-1/4" (184mm) depending on door and frame conditions; mounted on push side. Code A6 - Non-hold open Code A8 - Hold open Top Jamb Extra-Deep Reveal Arm (7-3/8" - 11") DC2220xA7 - DC2420xA7 - DC2620xA7 Permits top jamb mounting (push side) for reveals of 7-3/8" (187mm)- 11" (279mm) depending on door and frame conditions. Code A7 - Non-hold open Code A9 - Hold open QUIK-INSTALL TM Mounting Bracket Unique cost-saving feature, standard on all DC2000 and DC3000 closers. Part #: 188F03-8 x Finish Corbin Russwin Product Guide.43

44 ML2200 ECA Series Permits remote locking and unlocking of doors by means of a solenoid-operated actuator which is attached to the strike and mounted in a metal door frame. Ideal for high-security applications that must also meet life safety. Advantages Utilizes the proven ML2200 Series Mortise Lockset. Minimal power requirements lock is designed to lock or unlock as the situation demands. No special door or frame preparation required. Actuator fits ANSI strike preparation. Mechanical cylinder override available. Full range of voltages: 12 and 24 volt AC and DC, also 120VAC. Non-critical alignment. Mortar guard furnished standard. Solenoid-operated actuator fits standard ANSI strike prep Utilizes proven Corbin Russwin ML2200 Series Mortise Lockset Fits standard mortise lock door prep 6-pin solid brass cylinder standard; Corbin Russwin and competitive cylinder compatibility available All Corbin Russwin trim designs available Handing Handed, field reversible. Door Thickness 1-3/4" (44mm) only. Backset 2-3/4" (70mm) standard. Lock Chassis Heavy gauge chrome plated steel. 5-7/8" (149mm) Front Heavy gauge steel: 8" (203mm) x 1-1/4" (32mm), square corner, beveled, for 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt 2-piece mechanical, brass, with stainless steel anti-friction insert, 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw. Auxiliary Latchbolt 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking. Hub Knob: nickel steel, 3/8" (10mm) x 5/16" (8mm). Lever: steel 8mm. Spacing C. to c. knob/lever to cylinder: 3-5/8" (92mm). C. to c. knob/lever to thumbturn: 2-7/16" (62mm). Strike Wrought brass or bronze. ANSI straight lip standard 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8" (29mm) lip to center. The ML2200ECA is appropriate only for metal door and frame preparations, and is offered only with mortise locks and ANSI standard strike plates. Trim Available with all ML2200 Series trim designs. Cylinder Brass, 6-pin, L4 keyway, 0-bitted standard. Keys Two nickel silver std. Keying Available Master keying Construction master keying Visual key control Concealed key control Plug only to show (concealed shell) 7-pin cylinder Security cylinder Pyramid Interchangeable core (IC) Pyramid IC Security IC Blockout cylinder Flex head cylinder Warranty One-year limited. Operating Current 120VAC 0.15AMPS+/- 10V 24VAC 0.75AMPS+/- 2V 24VDC 0.75AMPS+/- 2V 12VAC 1.50AMPS+/- 1V 12VDC 1.50AMPS+/- 1V Six-inch pigtail supplied standard. Tenfoot connecting cable supplied standard on 120VAC units. Certification/Compliance ANSI Meets A Series 1000, Grade 1. Meets A117.1 Accessibility Code of the ADA. Federal FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL/ULC All locks listed for A label doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629 and 630. Corbin Russwin Product Guide.44

45 ML2200 ECA Functions The following functions are locked when power is on (Fail Safe). ML2200 ECA ML22906 ML22950 ML22907 ML22960 Function Description - Latchbolt by grip either side, unless outside grip is locked by energizing solenoid. - Latchbolt by key outside when solenoid is energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side, unless outside grip is locked by energizing solenoid. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side, unless both grips are locked by energizing solenoid. - Latchbolt by key outside when solenoid is energized. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side, unless both grips are locked by energizing solenoid. - Auxiliary latch deadlocks latchbolt. The following functions are unlocked when power is on (Fail Secure). ML2200 ECA ML22908 ML22970 ML22909 ML22980 Function Description - Latchbolt by grip either side only when the solenoid is energized. - Outside grip locked when solenoid is not energized. - Latchbolt by key outside when solenoid is not energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side only when solenoid is energized. - Outside grip locked when solenoid is not energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side only when solenoid is energized. - Both grips locked when solenoid is not energized. - Latchbolt by key outside when solenoid is not energized. - Auxiliary latch deadlocks latchbolt. - Latchbolt by grip either side only when solenoid is energized. - Both grips locked when solenoid is not energized. - Auxiliary latch deadlocks latchbolt. Corbin Russwin Product Guide.45

46 ML2200 ECL Series Ideal for door control where increased security is necessary at all times, the ML2200 ECL Series provides solenoid-operated remote locking and unlocking utilizing the proven ML2200 Series Mortise Lockset. Advantages Utilizes the proven ML2200 Series Mortise Lockset. Self-contained integral solenoid allows installation in standard mortise prep. Minimal power requirements - lock is designed to lock or unlock as the situation demands. Available in AC or DC, 12 or 24 volt systems. Mechanical cylinder override available. Available as Fail Safe or Fail Secure. One-piece, corrosionresistant, heavygauge steel front Heavy-gauge internal parts Heavy-duty antifriction latch standard 6-pin solid brass cylinder; Corbin Russwin and competitive cylinder compatibility available Available to match Corbin Russwin trim designs Handing Handed, field reversible. Door Thickness 1-3/4" (44mm) only. Backset 2-3/4" (70mm) standard. Lock Chassis Heavy gauge chrome plated steel. 5-7/8" (149mm) Front Heavy gauge steel: 8" (203mm) x 1-1/4" (32mm), square corner, beveled, for 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Latchbolt 2-piece mechanical, brass, with stainless steel anti-friction insert, 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw. Auxiliary Latchbolt 9/16" (14mm) effective throw and 3/8" (9.5mm) effective auxiliary latch deadlocking. Hub Knob: nickel steel, 3/8" (9.5mm) x 5/16" (8mm). Lever: steel 8mm. Spacing C. to c. knob/lever to cylinder: 3-5/8" (92mm). C. to c. knob/lever to thumbturn: 2-7/16" (62mm). Strike Wrought brass or bronze. ANSI straight lip standard 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8" (29mm) lip to center. Trim Available with all ML2200 Series trim designs. Cylinder Brass, 6-pin, L4 keyway, 0- bitted standard. Keys Two nickel silver std. Keying Available Master keying Construction master keying Visual key control Concealed key control Plug only to show (concealed shell) 7-Pin cylinder Security cylinder Interchangeable core Security IC Blockout cylinder Flex Head cylinder Pyramid Pyramid IC Warranty One-year limited. Operating Current 12VAC 0.8AMPS+/- 1V 12VDC 0.8AMPS+/- 1V 24VAC 0.4AMPS+/- 2V 24VDC 0.4AMPS+/- 2V Certification/Compliance ANSI Meets A Series 1000, Grade 1. Meets A117.1 Accessibility Code of the ADA. Federal FF-H-106C. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL/ULC All locks listed for A label doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Finishes BHMA 605, 606, 611, 612, 613, 625, 626, 629 and 630. The following functions are locked when power is on (Fail Safe). ML2200 ECL ML22910 Function Description - Latchbolt by grip either side, unless outside grip is locked by energizing solenoid. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. The following functions are unlocked when power is on (Fail Secure). ML2200 ECL ML22930 Function Description - Latchbolt by grip either side, only when solenoid is energized. - Outside grip locked when solenoid is not energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, unless both grips are locked by energizing solenoid. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, only when solenoid is energized. - Both grips locked when solenoid is not energized. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, unless both grips are locked by energizing solenoid. - Latchbolt by key outside when solenoid is energized. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, only when solenoid is energized. - Both grips locked when solenoid is not energized. - Latchbolt by key outside when solenoid is not energized. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, unless outside grip is locked by energizing solenoid. - Latchbolt by key outside when solenoid is energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. ML Latchbolt by grip either side, only when solenoid is energized. - Outside grip locked when solenoid is not energized. - Latchbolt by key outside when solenoid is not energized. - Inside grip always free. - Auxiliary latch deadlocks latchbolt. Corbin Russwin Product Guide.46

47 Electrified CL3300 Series Designed to provide solenoid-operated remote locking and unlocking, utilizing the proven CL3300 Series Cylindrical Lockset. Ideal for door control where increased security is necessary. Anti-rotational through-bolts at 6 and 12 o'clock positions 3 solid, cast lever options, non-handed with LEVER RELEASE design Advantages Meets or exceeds ANSI Grade 1 requirements. Self-contained integral solenoid allows installation in standard cylindrical prep. Minimal power requirements lock is designed to lock or unlock as the situation demands. Available in AC 12 or 24 volt systems. (Locks are universal for AC or DC.) Mechanical cylinder override. Available as Fail Safe or Fail Secure. Cylinder options same as CL3300. See page 17. Self-contained solenoid Heavy-duty lever return springs Electrical Requirements 12VAC/DC, 24VAC/DC (Locks are universal for AC or DC.) Door Thickness 1-3/4" (44mm) - 2" (51mm). Continuous Duty Solenoid Certification/Compliance ANSI Meets A156.2 Series 4000, Grade 1. Meets A117.1 Accessibility Code of the ADA. UL/ULC All locks listed for A label and lesser class single doors, 4' x 10'. Electrified CL3300 Functions CL3300 CL33903 Fail Safe CL33905 Fail Secure Function Description - Deadlocking latchbolt by lever either side, except when power on locks outside lever. - Power off/unlocks outside lever. - Inside lever always free. - Latchbolt retracted by key when locked electrically. - Deadlocking latchbolt by lever either side, except when power off locks outside lever. - Power on/unlocks outside lever. - Inside lever always free. - Latchbolt retracted by key when power is off. Corbin Russwin Product Guide.47

48 ED66900 Series Electrically Controlled Mortise Exit Device / Designed to utilize the safety features of the heavy-duty mortise crossbar exit device and the added security of an electrically controlled exit (ECE). Advantages Proven reliability and durability of the Corbin Russwin Mortise Lockset. Available as Fail Safe or Fail Secure. Key always retracts latchbolt. Integral solenoid. Low voltage AC or DC systems available. Accepts wide range of trims. Utilizes industry proven Corbin Russwin ML2200 Series Mortise Lockset Self-contained solenoid 6-pin solid brass cylinder standard; Corbin Russwin and competitive cylinder compatibility available Can accommodate knob, lever or thumbpiece trim Fits standard door prep Handing Field reversible device; specify hand. Mortise lock and strike not reversible. Bar Length Easily field cut to size. Standard 36" (914mm) bar fits doors up to 36" (914mm). Door Thickness Standard: 1-3/4" (44mm). Backset 2-3/4" (44mm). Stile Minimum width 5" (127mm). Projection 5-3/4" (146mm); 4-1/2" (114mm) depressed. Latchbolt Brass, 3/4" (19mm) throw. Auxiliary Latch Brass. Front 8"(203mm) x 1-1/4"(32mm) heavy gauge steel. Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Material Brass, bronze or stainless steel. Cases Heavy wrought, 7-1/2"(190mm)x 2-9/16"(65mm). Crossbar Standard: 13/16"(21mm) x 1-3/8"(35mm) oval seamless tubing. Dogging Dogging standard. Fasteners Standard: machine screws. Strike Standard: ANSI strike. Cylinder Optional when specified. Operating Current 12VAC 0.8 AMPS, 12VDC 0.8AMPS, 24VAC 0.4AMPS, 24VDC 0.4AMPS. Certification/Compliance ANSI Meets A156.3, Grade 1. UL/cUL All exit devices listed for safety as panic hardware; devices comply with UL 305 standards for panic hardware. UL symbol on active head indicates listing. NFPA All exit devices comply with NFPA 101 Life Safety Code. Finishes BHMA 605, 606, 611, 612, 613, 622, 625, 626, 629, 630. Corbin Russwin Product Guide.48

49 Electrified ED4000/ED5000 Series The ED4000 and ED5000 offer a complete range of electrical options while maintaining a continuum in appearance, security and functions. Ideal for use with monitoring security and alarm systems of most buildings. Electric Dogging Operation Electric dogging feature provides continuous latch retraction and touchbar dogging simultaneously. When power is applied to the exit device, depressing the pushbar will continuously hold the pushbar down and the latchbolt retracted in the unlocked position. Removal or interruption of power will release the pushbar and the latch will extend. Application SecureBolt Exit Device Rim Exit Devices Concealed Vertical Rod Exit Devices Surface Vertical Rod Exit Devices Mortise Exit Devices Listings UL listed for both Panic and Fire Exit Hardware. Electrical Specifications.35 24VDC-continuous duty (2) 36-volt holding magnets holding force (86Lbf. total). Requires a power transfer by others. Standard 24VDC power supply required. Ordering Specify Quick Code M97. Electric Latch Pullback Continuous-duty solenoid retracts the bolt(s) for momentary or maintained periods of time. Operation Latch Pullback provides a remote means of unlocking exit devices. Application SecureBolt Exit Device Rim Exit Devices Concealed Vertical Rod Exit Devices Surface Vertical Rod Exit Devices Mortise Exit Devices Listings UL listed for both Panic and Fire Exit Hardware. Electrical Specifications Requires 781N Controller (120VAC input, output sequencer for one or two devices). Requires a 4-wire electrical pivot or hinge by others. Solenoid 5.5 volt solenoid with 36 volt holding magnet (.172 Amp). 9 Amp in 28VDC..180 Amps holding continuous duty. Device bolts remain retracted for as long as the device is energized. Removal of power returns the device to the life safety, self-latching mechanical mode. Interface with central or local fire alarm system, automatic door operators, magnetic door locks, electric strikes, and access control systems. Ordering Specify Quick Code M94. Mortise Device Trim Control Operation Mortise Device trim control provides a remote means of locking or unlocking Mortise Exit Device Trim. This feature is provided by continuous-duty solenoids in the device mortise lock. Listings UL listed for both Panic and Fire Exit Hardware. Electrical Specifications 24VDC 330 milliamperes Fail -SAFE units maintain the door locked as long as the device is energized. Fail -SECURE units maintain the door unlocked as long as the device is energized. Standard 24VDC power supply required. Ordering Specify Quick Codes SAF for Safe or SEC for Secure. Corbin Russwin Product Guide.49

50 Electrified ED4000/ED5000 Series Monitors Operation Monitors are used to indicate the unauthorized use of an opening or to signal and control other opening hardware, such as magnetic locks. The monitoring devices are equipped with one internal single-pole doublethrow (SPDT) switch per monitor. Touchbar monitoring M92 provides indication of the touch bar being depressed. Also used as Request to Exit Switch(REX). Outside Trim monitoring M93 provides indication of the device being operated from the outside. Bolt Position monitoring M91 provides indication on the position of the latchbolt on rods. Application SecureBolt, Rim Exit Devices, Concealed Vertical Rod Exit Devices, Surface Vertical Rod Exit Devices, Mortise Exit Devices Listings UL listed for both Panic and Fire Exit Hardware. Electrical Specifications 28VDC SPDT contacts Ordering Touchbar monitor specify M92 Outside Trim monitor specify M93 Bolt Position monitor specify M Power Supply The 780 provides 2Amps of output current at 24VDC. The 780 can control a total of 5 electric Dogging Devices or 5 Safe / Secure Mortise Exit Devices. A separate switching device (key switch or push button) must be used to control the locking device. Specifications 120VAC Input Power 2Amp Output Fire Alarm Interface 781N Controller The 781N controller is designed to control one or two electric latch pullback devices. Operation can be set for sequential or individual control of doors. When using a momentary normally open contact switch, the latch pullback delay time feature can be adjusted from 1 to 20 seconds. An input to interface with automatic door operator controllers is provided. Fire alarm input is also provided. Listing Listed as an Exit Device Control Unit to UL 294 requirements. Specifications 120VAC 60HZ 9 Amp inrush for 100 milliseconds, Holding voltage 28 Amps Fire Alarm Interface MPS Power Supply Operation Power supplies are designed to provide reliable filtered and regulated power for long life to a variety of electrified hardware components. All modular power supplies are field-selectable for 12 & 24 VDC and are designed to meet UL 1481 Standards. Recommended for the SAF, SEC, M97, delayed egress exit devices and electric trim. Fire panel emergency release input PC Board mounted system LED indicator Field-selectable 12 or 24 VDC output Regulated and filtered with input and output protection Battery charging is provided from a separate output terminal Electrical Specifications Inputs: (230 VAC optional), 50Hz/60hZ Outputs: 12/24 1 AMP, 1.5 AMP or 4 AMP, Filtered and regulated output Listings UL & cul listed 1012 General Purpose Power Supply D Delayed Egress M97 Electric Dogging SAF Fail Safe mortise device trim control SEC Fail Secure mortise device trim control Ordering MPS10 and MPS15 power supplies are available through Corbin Russwin. To order, specify MPS10 or MPS15. Corbin Russwin Product Guide.50

51 Electrified ED4000/ED5000 Series Latch Pullback Electric Latch Pullback interfaced with an Automatic Door Operator Components ED5200- M94 Latch Retraction 781N Controller *Powermatic Door Controller *ADA Pushbuttons #661 Wire Transfer by Folger Adam PTH-4 Operation Exit device allows free egress at all times. Activating the interior or exterior push button retracts the latchbolt in the device and the door automatically opens. Door closes and relatches after hold open time has elapsed in the operator. ED5200 x M94 Electric Dogging Electric Dogging with Monitor Functions Components ED5200-M92 & M97 Electric Dogging Device with touchbar monitor MPS 10 Power Supply with fire alarm interface 9231 Keyswitch with a Red and a Green LED ASSW-105A DPS Door Position Switch and Wire Transfer Hinge by Folger Adam PTH-4 Wire Transfer Hinge by Folger Adam (4 conductor) Operation Exit device allows free egress at all times. Activating the 9231 maintained keyswitch applies power to the ED5200 M92 & M97 device. The first mechanical depression of the touchbar will retract the latchbolt and hold the touchbar down in a dogged position. Interruption of power or turning the keyswitch off will release the touchbar and the latch will extend. The red LED illuminates when power is on and the touchbar can be depressed and dogged. The green LED illuminates when power is off and the device can be latched for securing the door. Monitor Function Electric Latch Retraction with Monitor Functions Components ED M94 x M92 Exit Device with touchbar monitor 781N Controller 9411L2 Momentary Pushbutton with Red and Green LEDs DPS Door Position Switch by Folger Adam PT-2 18" Door Cord by Folger Adam Operation Exit device allows free egress at all times. Activating the 9411L2 push button retracts the latchbolt from a remote location. The green LED indicates that the door is closed and latched. The red LED illuminates when any of the following situations occur: - the touchbar is depressed - opening of door Corbin Russwin Product Guide.51

52 Electrified ED4000/ED5000 Series Accessories / Key Switches Audible / Visual Annunciators N L (1) SPDT Maintained (1) SPDT Momentary Options 1-3/4" Narrow face plate (suffix N ) L2 - two LEDs (red and green) Specifications Keyswitch for operation using a standard 1-1/4" mortise cylinder (cylinder not included). Contact Rating VAC. SPDT 3-position Sonalert 2ft VDC Mounted on one gang stainless steel plate L2 - Two LEDs mounted on one gang stainless steel plate. 12/24VDC (red and green) Push Button / (1) SPDT Momentary (1) SPDT Maintained (Alt. Action) (1) SPDT Momentary Option L2 - two LEDs (red and green) Specifications SPDT form Z contact Rated Rated 9500 Push button size - 1-9/16" (40mm) diameter Corbin Russwin Product Guide.52

53 ED4000/ED5000 Series Delayed Egress Exit Device / The delayed egress option provides additional security and safety in a strong line of panic hardware. The delayed egress exit device is an electromechanical device used to secure interior or exterior openings. The option is available for rim, SecureBolt, concealed vertical rod and mortise devices in all standard finishes. Operation The exit door is normally closed and latched. The Delayed Egress Exit Device D secures the door in the locked mode with the solid Red LED indicating locked mode status. Depressing the push pad for less than 3 seconds will sound the nuisance beep without initiating the alarm. Depressing the exit bar for 3 seconds or longer will initiate an irreversible local audible beeping tone and a visual amber indicator until the device releases. After the delay time of 15 or 30 seconds the device releases, the LED changes to Green, and the alarm changes to a steady tone which continues to alarm until manually reset by key. The remote monitoring contact outputs can be used to alert security personnel. The person depressing the exit bar is denied egress for 15 or 30 seconds and security personnel are alerted. Note: The 15-second time delay is standard. 30-second time delay is optional (may be accepted by local jurisdiction). For use on hollow metal, wood or composite interior or exterior doors. BOCA options available to comply with National Building Code requirements. BOCA option is not suitable for installations in accordance with NFPA /4" door thickness standard; 2 and 2-1/4" optional; specify D200 or D214 when ordering. Standard 36" device fits 36"doors only. Device cannot be cut less than 36". Option W048 fits doors 42"-48". Devices cannot be cut less than 42". Available for ED4000 and ED5000 Series SecureBolt, rim, mortise and concealed vertical rod exit devices. Standard Key Switch Operation: - Normal - Bypass - Reset/Delay Nuisance Delay Remote Control Inputs: - Remote Reset - Remote Bypass Options Bolt Position Monitor M91 Outside Trim Monitor M93 Mortise Electric Trim Control SAF/SEC 30 Second Delay M88 Required Accessories Power Supply: A regulated and filtered power supply with a Fire Alarm interface is required. 1 Amp 24VDC per device. Special options will require more amperage. Consult factory. Power Transfer: Allows the power to make the transition from frame to door without pinching or removal of insulation. Listing UL/cUL Listed Controlled Exit Panic Device (FUKD/FUKD7) Special Locking Arrangements (FWAX/FWAX7) BHMA (ANSI and ANSI ) Directory of Certified Exit Devices Specifications Input Voltage: 24VDC (+/- 10%) Regulated and filtered. Power Consumption Standard Device: 500 ma Device with Electric Trim Control: 1.5 Amp Mortise Device with Safe or Secure option: 1.5 Amp Cylinder Utilizes a 1-1/8 mortise cylinder. Not included unless specified. How to Order Suffix D to device: ED5200D. Corbin Russwin Product Guide.53

54 Alarm Kit for ED4000/ED5000 Ideal for high-use, high-abuse situations on narrow and regular stile doors in new construction and renovations. Advantages Meets or exceeds ANSI Grade 1 requirements. Heavy-duty steel construction. Easy-to-use crossbar operation for quick egress and ADA compliance. Low profile and projection for barrier-free code compliance. No projecting parts to inhibit egress. Through-bolted trims for strength and security. Wide range of trim styles and finishes to match other Corbin Russwin products. Activation Alarm is activated when the exit device touchbar is depressed. Factory preset for standard alarm mode which automatically resets after 5 minutes. Continuous Alarm Mode Alarm sounds continuously when the exit device touchbar is depressed. Alarm must be manually reset by keyswitch. (This feature is selected by a switch on the circuit board.) Low Battery Warning Audible chirp. Warning Decal EMERGENCY EXIT-ALARM WILL SOUND Nuisance Alarm Factory preset for instant alarm. Selectable feature for alarm to sound when exit device touchbar is depressed for more than 2 seconds. (This feature is selected by a switch on the circuit board.) Kit Available in kit form for field retrofit. Order ED40AK or ED50AK Kit. Arming Delay / Authorized Egress 10-second delay (after arming) permitting egress (by turning key clockwise). Alarm Shunt Ingress shunt alarm input for devices with signal & outside trim monitors (M91 & M93). Power Requirements One 9 volt battery (included). Decibels feet. Arm/Disarm Requires one 1--1/8" (28mm) straight cam mortise cylinder. Clockwise turn arms the alarm, counter-clockwise turn disarms or silences the alarm. Low audible chirp indicates alarm has been activated. (Cylinder not included unless specified.) Device Status A red LED indicator will illuminate every 30 seconds when the alarm is armed. Tamper Resistant Built-in safety monitor sounds alarm when tampering occurs. Quick Code M61 Exit Alarm Device ED4000 Series x M61 ED5000 Series x M61 See price book for cylinder options. Alarm Kit* ED 40AK ED 50AK See price book for door width and cylinder options. *Cannot retrofit to existing SVR devices. Corbin Russwin Product Guide.54

55 Electromechanical Closers DC26900, DC Series / Closer holder devices are used on fire doors that need to be held open but must close in case of fire. Corbin Russwin has two distinctly different models to achieve that goal. DC26900 This hold open device uses the DC2600 closer with an affixed electromagnet to release the door during an alarm. Free swing arm option also available. A wise choice for patient room applications. DC Using an aluminum body closer this two-piece (closer on door, holder on frame) offers detectored and non-detectored model. Perfect for cross-corridor installations. Voltage AMP Draw 24 VAC VDC VAC VDC VAC VDC.044 Voltage Master Unit AMP Draw Companion AMP Draw 24 VDC 30 ma 80 ma 24 VAC 47 ma 80mA 120 VAC 33 ma 17mA Corbin Russwin Product Guide.55