Installation Instructions (07-08) CAUTION
|
|
- Martin Underwood
- 6 years ago
- Views:
Transcription
1 Hinge Edge of Hinge Edge of 7500 eries Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility of misapplication or misadjustment. Multi ize 1 thru 6 Non Hold Open Closers Models 7500 J7500 J7500 P7500 Note: With or without suffix "DA (Delayed Action) closing. With or without suffix "M" with metal Cover. The closing force for series 7500 door closer is adjustable from a size 1 to a size 6, as outlined in ANI tandard A When this series of door closer is installed and adjusted to conform to ADA reduced opening force requirements (5 lbs max.) for interior doors. It may not have adequate closing force to reliably close and latch the door. Power adjustments charted on pages 3,4 and 5 are recoended where possible, to ensure proper door control. For pecial Applications a separate door and frame preparation template is packed with these instructions. Use this instruction sheet for installation sequence and closer adjustments only. egular Arm Installation Closer mounts on hinge (pull) side of door. ee Page 3. Closer cover not shown eft Hand H ight Hand everse H ight Hand H eft Hand everse H Top Jamb Installation Closer mounts on frame face on opposite to hinge (push) side of door. ee Page 4. Closer cover not shown ight Hand H eft Hand everse H Hinge Edge of Parallel Arm Installation Closer mounts on opposite to hinge (push) side of door. ee Page 5. Closer cover not shown eft Hand H ight Hand everse H ight Hand H eft Hand everse H Hinge Edge of eft Hand H ight Hand everse H
2 Components: Figure 1 DA Option Closer hoe hoe and Adjusting od D Forearm crew U X2 P B ITED 149A 666/785 DOO COE BOD tandard Closer Tube Main Arm and lide Unit Assembly Power Adjustment Nut Closer Assembly 2 Cover crews 2 Cover crews For Parallel Arm Only crew Pack No offit Plate Plastic Cover (tandard) Metal Cover (Optional) It is recoended that the door, on which the door closer will be installed, be hung on ball bearing hinges. must swing freely. A separate door stop, supplied by others, is recoended to prevent damage to the door closer, closer arm; or to the door, frame or adjacent walls. and Frame must be properly reinforced, or use of special fasteners employed, to prevent the mounting screws from pulling out. All dimensions are given in with corresponding metric dimensions (millimeters) in parentheses. closer should never be installed on the exterior of a building. Preparation for Fasteners figure 2 tandard Optional Fasteners elfdrilling crew Throughbolts and groetnuts or Frame Wood (see Note) 1/4 20 machine screw Metal leeve nuts and bolts Aluminum or Metal Hollow Metal Aluminum or Wood All Drillizes No drill required 3/16 (4.30 ) Drill: #7 (0.201 dia.) Tap: 1/4 20 9/32 (7 ) through; 3/8 (9.5 ) door face opposite to closer 3/8 (9.5 ) through 9/32 (7 ); 3/8 (9.5 ) dia. x 3/8 (9.5 ) deep on door opposite to closer Note: Wood doors/frames. Pilot hole must be drilled when using elfdrilling crews. Alway consult door/frame manufacture for fastener compatibility with the material of their door/frame. Page 2
3 Installation Instructions egular Arm Template A 55/8 (143) 13/4 (44.5) Do Not cale Drawing 3/4 (19) 11/8 (29) ight Hand hown Dimensions are in. C Hinge or Pivot 23/8 (60.3) 4 (101.6) (171.5) 43/8 (111.1) 123/8 (314.3) Installation equence elect angle of opening and use dimensions shown in template and chart to locate 4 holes on door for closer body ( or 4 holes for optional 7786 backplate) and 2 holes on frame face for arm shoe. For applications that are different from above, a separate template will be supplied for door and frame preparation. Valves Up 3/4 (19) 11/2 (38) ight Hand 7786 Backplate Mounting Hole Only To to to to wing eft Hand Dimension A 75/8 65/8 45/8 41/ Valves Down Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7786 backplate to door, only if it is required for the door conditions. et closing power NOW using Power Adjustment Chart to the right or set upon completion of installation. Install closer body with tube end away from hinge, with valves: Down for eft Hand door UP for ight Hand door. Fasten arm shoe (with adjusting rod) Figure 1, Page 2 to frame face. Install main arm onto closer pinion shaft, aligning arm mark with the one flat corner of the square shaft Pinion Flat, see illustration below. ecure with hex washerhead main arm screw. Page 3 Arm Mark Pinion Flat emove forearm screw from adjusting rod on frame and open door slightly to slide adjusting rod into slide unit. Close door and rotate arm away from hinge until adjusting rod and slide unit are perpendicular (at a 90 angle) to door. Install and tighten forearm screw. Make closer adjustments, if required, using information below and on Page 6, then install closer cover. Interior 32 (0.81) 36 (0.91) 52 (1.32) 60 (1.52) Power Adjustment Chart Exterior 28 (0.70) 34 (0.86) 38 (.96) Full Clockwise Turns of Closer Power Adjustment Nut (from 0 turns) NOTE: of 161/2 turns (360 ) of Power Adjustment Nut. Closer is shipped set at 8 turns from the factory. Decrease Power 5 81/ /2 161/2 ee Power Adjustment Chart. Power adjustments charted are recoended where possible, to ensure proper door control. Increase Power
4 Installation Instructions A * 3/8 (10) C Hinge or Pivot 23/8 (60.3) 4 (101.6) (171.5) 55/8 (143) 43/8 (111.1) Installation equence elect angle of opening and use dimensions shown in template and chart to locate 4 holes on frame for closer body ( or 4 holes for optional 7786 backplate) and 2 holes on door for arm shoe. For applications that are different from above, a separate template will be supplied for door and frame preparation. Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7786 backplate to frame, only if it is required for the frame conditions. et closing power NOW using Power Adjustment Chart to the right or set upon completion of installation. Install closer body with tube end away from hinge, with valves: Up for eft Hand door Down for ight Hand door. Fasten arm shoe (with adjusting rod) Figure 1, Page 2 to door face. Note that a longer adjusting rod or different arm might be required for your frame conditions, see illustration with eveal ange chart to the right. Install main arm onto closer pinion shaft, aligning arm mark with the one flat corner of the square shaft, Pinion Flat, see illustration below. ecure with hex washerhead main arm screw. Top Jamb Template 13/4 (44.5) 123/8 (314.3) *15/8 (41) * 3/4 (19) 11/8 (29) * Always use frame or transom rabbet as reference plane, not bottom of stop. wing eft Hand Valves Up Interior 32 (0.81) 36 (0.91) 52 (1.32) 60 (1.52) Do Not cale Drawing eft Hand hown Dimensions are in Backplate Mounting Hole Only To to to to 180 Power Adjustment Chart Exterior 28 (0.70) 34 (0.86) 38 (.96) wing eveal ange Under 3 (76) 3 to 41/4 (76 to 108) 41/4 to 67/8 (108 to 175 ) 41/4 TO 67/8 (108 TO 175 ) swing Dimension A 75/8 65/8 45/8 41/8 Make closer adjustments, if required, using information below and on Page 6, then install closer cover. Model 7500 J7500 Jl7500 Complete Arm A 77011B Adjusting od A B Full Clockwise Turns of Closer Power Adjustment Nut (from 0 turns) NOTE: of 161/2 turns (360 ) of Power Adjustment Nut. Closer is shipped set at 8 turns from the factory. 5 81/ /2 161/2 ight Hand Valves Down Pinion Flat Arm Mark emove forearm screw from adjusting rod on door and open door slightly to slide adjusting rod into slide unit. Close door and rotate arm away from hinge until adjusting rod and slide unit are perpendicular (at a 90 angle) to door. Install and tighten forearm screw. Page 4 Decrease Power ee Power Adjustment Chart. Power adjustments charted are recoended where possible, to ensure proper door control. Increase Power
5 Installation Instructions Parallel Arm Template ½ (13) Dimension A Dimension B C Hinge or Pivot B 3/8 (10) 2 (50.8) 23/4 (69.9) 123/4 (323.9) 7/16 (11.1) To to to to /4 71/4 61/4 51/ /4 73/4 53/ /2 (64) 4 (101.6) 1/4 (6) 43/4 (120.7) 5/16 (7.9) 11/8 (29) Do Not cale Drawing eft Hand hown Dimensions are in Dropplate Mounting Hole Only 23/8 (60.3) A (171.5) Installation equence elect angle of opening and use dimensions shown in template and chart to locate 4 holes on door for closer body ( or 4 holes for optional 7788 dropplate) and 4 holes on underside of frame for soffit plate. For applications that are different from above, a separate template will be supplied for door and frame preparation. Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7788 dropplate to door, only if it is required for the door conditions. et closing power NOW using Power Adjustment Chart to the right or set upon completion of installation. Install closer body with tube end away from hinge, with valves: Down for eft Hand door UP for ight Hand door. Fasten soffit plate to frame. Install adjusting rod onto soffit plate and secure with screw and washer assembly from screw pack. Install main arm onto closer pinion shaft using illustration below. The one flat corner of the square shaft Pinion Flat, must be aligned with the corner mark on arm: Arm mark for ight Hand door Arm mark for eft Hand door This requires that the pinion shaft be rotated approximately 50 degrees to get correct alignment. ecure with hex washerhead main arm screw. Pinion Flat Close door and pull arm away from door face so elbow is 11/2 (38) off of door face. einstall and tighten forearm screw in rod. 2 Typ. eft Hand Valves Down * wing 11/2 (38) Increase Power ight Hand Valves Up Make closer adjustments, if required, using information below and on Page 6, then install closer cover. Interior 30 (0.76) 34 (0.86) 38 (.96) 54 (1.37) Power Adjustment Chart Exterior 26 (0.66) 30 (0.76) 36 (.91) Full Clockwise Turns of Closer Power Adjustment Nut (from 0 turns) NOTE: of 161/2 turns (360 ) of Power Adjustment Nut. Closer is shipped set at 8 turns from the factory /2 141/2 161/2 ee Power Adjustment Chart. Power adjustments charted are recoended where possible, to ensure proper door control. Arm Mark emove forearm screw from adjusting rod on frame and open door slightly to slide adjusting rod into slide unit. Page 5 Decrease Power
6 Unit Adjustment Closing peed Controls (Figure 1A or 1B and 2.) Valve "/D" Controls weep ange on tandard closer ( or Delayed ange on Delayed Action closer). Valve "" Controls atch ange. Valve "" Controls weep only on Delayed Action closer. Closing peed Controls Control (Figure 4.) Backcheck ("B") valve controls the hydraulic resistance to door opening. NEVE close this valve completely it is not to provide a positive stop. Backcheck position ("P") valve controls the door angle where backcheck cushioning starts. Valve normally closed. Figure 1 Controls Figure 4 atch 10 Closed weep ange atch 10 Closed weep 70 Delay ange Backcheck tandard Closing Cycle 1A Closing peed Controls "" (atch) "/D (weep) Delayed Action Closing Cycle Adjust Closing peed Time to between 3 to 7 second from 90. Use of the door by handicapped, elderly or small childen may require greater closing time. 1B Figure 2 "" (atch) "" "/D" (Delayed Action) Backcheck Backcheck Position 1/8" Hex Key Cycle "P" (Normally Closed) "B" (NEVE Close Completely) Figure 5 Backcheck Cushion Increase 1/8" Hex Key tandard Closer Delayed Action Closer low Open for backcheck later in dooropening cycle. Decrease Do not force valves counterclockwise out of closer body or a fluid leak will occur. 1/8" Hex Key Fast All Valves Do not force valves counterclockwise out of closer body or a fluid leak will occur. Closing Power Control (Figure 3) Adjust as required (see Power Adjustment Charts on pages 3, 4, & 5). Identify Closer Closing Power Control Figure 3 tandard 7500 = 4 valves (/D,, P&B) Delayed Action 7500DA = 5 valves (/D,,, P&B) P B Increase Power /D ITED 149A DOO COE BOD Decrease Power Old models may be stamped 14 or 26. They can be replaced with the new 16 model eries Body = size 16 (tamped double digit) AA ABO Norton is a registered trademark of ale ecurity Inc., an AA ABO Group company. Copyright 2001, 2008 ale ecurity Inc., an AA ABO Group company. All rights reserved. eproduction in whole or in part without the express written permission of ale ecurity Inc. is prohibited Highway 74 East Monroe, NC Tel: (877) Fax: (800) Page 6
Installation Instructions CAUTION
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationInstallation Instructions
eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H ight Hand Door H eft Hand everse H egular rm ee Page Top Jamb ee Page 5 Parallel rm ee Pages & Instructions CUTION n Incorrectly installed
More informationInstallation Instructions. Non Hold Open Models. Sized (Sizes 2,3,4,5) Weaker BC 9303BC 9304BC 9305BC. Stronger +
O Right Hand RH eft Hand Reverse HR eft Hand H Right Hand Reverse RHR eft Hand H Right Hand Reverse RHR Regular rm ee Page Top Jamb ee Page Parallel rm ee Pages 3 & UTION Instructions Non Hold Open Models
More information3010 Series. 4 Latch. Hold Open Arm Door Closers Regular Arm. Installation Sequence. Mark and Drill Holes. Parts. Sweep. Set Hold Open.
000 eries Tri-Packed Non Handed Closer Instructions eft Hand - H ight Hand everse - H eft Hand - H ight Hand everse - H egular rm ee Page ee Page 5 eft Hand - H ight Hand everse - H Parallel rm ee Pages
More information8000 Series Tri-Style Non Handed Door Closer
8000 eries Trityle Non Handed Do Closer eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H egular rm ee Page ee Page 5 Parallel rm ee Pages 3 & 4 Instructions
More informationSeries 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications
Series 940 J940 ASSA JL940 ABLOY Installation Instructions Multi-Sized to 6 Non-Hold Open Regular Arm Applications Left Hand Regular Arm Application Contents Page Template Template with 984-8 Drop Plate
More informationSeries. Non Hold Open Door Closers Parallel Arm. * conditions permitting. Parts. Mark and Drill Holes. Installation Sequence.
Instructions CUTION n Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions should be followed to avoid the possibility of misapplication
More informationTri-Style 1600H Series Non Handed Door Closer
OY Non Handed loser egular rm ee Page eft Hand H ight Hand everse H eft Hand H ight Hand everse H eft Hand H ight Hand everse H ee Page 5 Parallel rm ee Pages & 4 UTION Instructions Trityle 100H eries
More informationTri-Style 1600 Series Non Handed Door Closer
CAUTION Trityle 100 eries Non Handed Do Closer CAUTION 809312502020 (1202) An Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions
More informationSARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH FOLLOWING ARM SETS: JH, JHZ and JPH9 Strength Adjustment From Size 1 Through 6.
GENT 1331 DOO COE INTTION INTUCTION WITH FOOWING M ET: JH, JH and JPH9 trength djustment From ize 1 Through 6. CUTION: FIUE TO INT O DJUT POPEY MY EUT IN INJUY O DMGE FO ITNCE, C GENT T 1800775477 or www.argentlock.com
More informationRequirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING
CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions
More informationASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms
DC610 Series Multi-Sized 1 thru 6 DC610 Series Half-Size 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH
More informationHinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430
Installation Instructions Universal Door Closers Slide Track Application (0 Maximum Door Swing) (standard)- N.H.O. Bumper Stop A - H.O. Bumper Stop Track - Pull Side See pages 2 & Hinge (Pull) Side Door
More informationASSA ABLOY Universal Door Closers
Installation Instructions For Non-Hold Open or A Hold Open Arm Options DC6200 Series DC6400 Series Multi-Sized thru 6 Half-Size thru 6 Regular Arm Parallel Arm Universal Door Closers Jamb Mount See pages
More informationASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device
Overhead Concealed Closer Holder Releasing Device with Rigid Slide Arm For wood or metal doors 1-3/4 to 2-1/4" (45-57mm) thick Hung in a hollow metal frame Standard butt hinges Typical Installation One
More informationRequirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING
CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO
More informationDC3210 Series. Multi-Sized 1 thru 6 DEEP REVEAL APPLICATION WITH M103 OPTION(615F59 CLAMP KIT) Recommended Closer Size
DC310 Series Multi-Sized 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH DEEP REVEAL APPLICATION WITH M103
More informationInstallation Instructions Series 78-B/FHA Hold Open
Installation Instructions Series 78-B/FHA Hold Open Traditional Style Door Closers Read these instructions before proceeding with the installation. Make sure that the door opens the full angle desired
More informationASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY
0 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) / Replacement Motor Key (00KEY) Rod
More informationThese door closers should NOT be installed on the exposed side (weather side) of exterior doors.
500 Series Non-Hold Open Door Closer Instructions vailable in Sizes,, and 5 Regular rm See Page n incorrectly installed or improperly adjusted door closer can cause property damage or personal injury.
More informationMulti-feature closers with compact design, ideal for application on interior doors DOOR CLOSER CATALOG
Multi-feature closers with compact design, ideal for application on interior doors 1700BC E R I E DOOR CLOER CATALOG 1700BC ERIE LIGHT COMMERCIAL DOOR CLOER INTRODUCTION Norton 1700BC eries Door Closers
More information9000 Series Trinity The world's most intelligent door closer
9000 Series Trinity The world's most intelligent door closer INTRODUCTION Designed for doors that are subject to changing conditions, the Norton 9000 Series Trinity offers customers an intelligent door
More informationConcealed overhead closer for high-end applications DOOR CLOSERS CATALOG
Concealed overhead closer for high-end applications 7900 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 7900 Series Overhead Concealed Closers offer extremely durable operation with the vandal resistance
More information9540 SERIES. Cast Iron Door Closer
Cast Iron Door Closer Introduction The Norton 9540 s provide an ideal retrofit solution for retail, office, government and other commercial facilities. Certified to ANSI/BHMA Grade 1 requirements for long
More information7100SZ Series SafeZone Installation and Instruction Manual
7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 80-9371-0081-00 (10-10) Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 5 for template) 3 1 Push Side Applications
More informationCloser with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG
Closer with traditional styling for low to moderate traffic openings 78-B/F S E R I E S DOOR CLOSER CATALOG Introduction The 78-B/F Series is a surface closer with traditional styling that offers multiple
More information51 Series Door Closers. An ASSA ABLOY Group brand
51 Series Door Closers An ASSA ABLOY Group brand Introduction contents Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11
More informationASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual
Pull Side Applications with Slide Track (7210, 7250) (see page 7 for template) 7200 Series Multi-Point Hold Open Installation and Instruction Manual 3 1 Push Side Applications with Double Lever Arms (7220,
More information51 Series Door Closers. An ASSA ABLOY Group brand
51 Series Door Closers An ASSA ABLOY Group brand Introduction CONTENTS Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11
More information5700 Series Power Operator Stop (Push) Side Mount Installation and Instruction
5700 Series Power Operator Stop (Push) Side Mount ASSAManual ABLOY Installation and Instruction 80-957-0005-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 5 6 0 8 7 9 -/8 () Item No. Description Back plate Door
More information78-B/F Series. Traditional Door Closers
78-B/F Series Traditional Door Closers introduction The Norton Series 78-B/F Traditional Surface Closers represent a combination of traditional styling and modern closer features. All closer sizes are
More informationROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information
ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer
More informationMOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED
HINGE (PULL) SIDE MOUNT LCN 4010 SERIES The 4010 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Ten Million
More information5600 Series Power Operator Installation and Instruction Manual
5600 Series Power Operator Installation and Instruction Manual 80-956-000-00 (08-) 5 ASSA ABLOY 6 Item No. Description Motor (5600M) Cover (5600COV) Control Inverter (5600IN) Power Supply VDC (5600PS)
More informationTS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)
TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer
More informationPower drill Center punch Wire stripper
Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 7 for template) 7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 3 1 Push Side Applications with Double Lever
More informationASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY
00 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) Track Assembly (0-) / Replacement
More informationPULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T*
4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on
More informationTS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH)
Surface applied door closer Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) TABLE OF CONTENTS Technical specifications Size selection chart 2 Closer setup
More information8000 SERIES Architectural Door Closer
Architectural Door Closer overview The 8000 eries Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve
More informationHIGH SECURITY CLOSERS SERIES
HIGH SECURITY CLOSERS SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFACE MOUNTED CLOSERS PRODUCT SELECTION GUIDE Surface mounted 1000 Series LCN closers feature a modern slim line design for easy installation on narrow head frames and top rails. This guide
More informationHIGH SECURITY SERIES
HIGH SECURITY SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide is based
More information*4110 HCUSH mount shown
*PARALLEL ARM (PUSH SIDE) MOUNT The 4110 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Standard 4110 series
More information7570 SERIES Security Door Closer
7570 SERIES Security Door Closer INTRODUCTION Norton High Security Closers are designed for use in prisons, government buildings, schools, financial institutions, or any installation where vandalism, abuse,
More informationHigh Security Closers Series
High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can
More informationDOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM
SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of the closer.
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN 4040 SERIES The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged
More informationD O O R C L O S E R S
DOOR CLOSERS DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the finest ADVANTAGE surface mounting door closers certified by BHMA including: Multi-size door closer: 9000, 8000, 6000, 6000S
More information5300 Series 5300 SERIES
5300 Series Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control.
More informationD o o r C l o s e r s
Door Closers DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the fi nest ADVANTAGE surface mounting door closers for your various application demands. There are Multi-size door closer: 9000,
More information5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY
5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 80-957-000-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 6 5 0 8 7 9 Item No. Description Back plate Door Closer
More informationPUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM
4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on
More informationDC5000 Series. Cam Action Door Closer
Series Cam Action Door Closer Introduction Table of Contents Introduction...2 Features... 3 Mountings... 4 Accessories... 5 How to Order... 6 Quick Codes... 6 Helpful Terms... 7 Specifications... 8 Applications
More informationCONCEALED CLOSER SERIES
CLOSER SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of
More informationMulti-sized cast iron closer for high use applications DOOR CLOSER CATALOG
Multi-sized cast iron closer for high use applications 9500 S E R I E S DOOR CLOSER CATALOG INTRODUCTION Ideal for high use openings, the Norton 9500 Series Cast Iron door closer offers the durability,
More informationFull-featured operator with slim profile for moderate to high traffic applications LOW ENERGY OPERATOR CATALOG
Full-featured operator with slim profile for moderate to high traffic applications 6300 S E R I E S LOW ENERGY OPERATOR CATALOG INTRODUCTION The Norton 6300 Series Low Energy Operator offers a broad set
More information1600 SERIES ALUMINUM STOREFRONT DOOR CLOSERS
INTRODUCTION The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1 closers are designed for exterior
More informationDoor Controls DOOR CLOSERS
Door Controls Hager door closers offer architects, contractors, and building owners a superior product with proven reliability. In fact, our 5100, 5200, and 5300 Series Grade 1 models are the only closers
More informationD-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.
D-1610/D-1611 SERIES: DOOR CLOSERS D-1610/D-1611 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 Standard Application...4 Parallel
More information4040XP Series Door controls
4040XP Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XP Series is a non-handed
More informationHigh Security Closers Series
High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can
More informationCopyright , 2018 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express
over he ad conce aled closer s o v e r h e a d c o n c e a l e d c l o s e r s i n t r o d u c t i o n i n t r o d u c t i o n Rixson Overhead Concealed closers offer an aesthetically appealing way to
More informationFully adjustable door closer for aluminum storefronts and other medium traffic applications DOOR CLOSERS CATALOG
Fully adjustable door closer for aluminum storefronts and other medium traffic applications 1600 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 1600 Series door closers offer proven quality, performance
More informationMulti-point closer/holder with motion sensor 7100SZ DOOR CLOSER CATALOG
Multi-point closer/holder with motion sensor 7100SZ S E R I E S DOOR CLOSER CATALOG INTRODUCTION The 7100 Series SafeZone door closer safeguards occupants throughout a variety of facilities with the detection
More information7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor
7100SZ Series SafeZone Multi-Point Closer/Holder with Motion Sensor Page Revised Electronically 8/11 7100SZ Series SafeZone INTRODUCTION Designed with safety in mind, SafeZone takes door closers to a higher
More informationDoor Closer Arms DC F95 (Non-Hold Open) Regular Arm Used with regular arm mounting (pull side) and top jamb mounting (push side)
Door Closer Arms Used with regular arm mounting (pull side) and top jamb mounting (push side) Non-Hold Open arm standard on the DC3200 (Hold-Open) 597F52 Heavy-Duty Mounted on pull side Optional on DC3200
More informationLCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE)
CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged high traffic
More informationAn ASSA ABLOY Group brand. 400/4400 Series. Institutional Door Closer
An ASSA ABLOY Group brand 400/4400 Series Institutional Door Closer the engineer s choice Yale s 400/4400 Series Institutional Door Closers offer customers the ideal combination of superior performance,
More informationTS93 EMF T/PT/TDE. Surface applied door closer
TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress
More information7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor
7100SZ Series SafeZone Multi-Point Closer/Holder with Motion Sensor INTRODUCTION Designed with safety in mind, SafeZone takes door closers to a higher level. SafeZone uses a multi-point, electromechanical
More information4000 Series mounted closers
4000 mounted closers APPLICATIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Adapter plates and other installation accessories available
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional
More informationLCN 4010T SERIES HINGE (PULL) SIDE
HINGE (PULL) SIDE MOUNT The 4010T SMOOTHEE is LCN s best performing heavy duty track closer designed specifically for interior doors in institutional and other rugged high traffic applications. FEATURES
More informationD-3550 / D-3551 SERIES: DOOR CLOSERS. D-3550 / D-3551 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.
D-3550 / D-3551 SERIES: DOOR CLOSERS D-3550 / D-3551 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 How To Order...3 Standard Application...4
More information*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB**
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding
More information7500/7700 SERIES INSTITUTIONAL DOOR CLOSER
Page Revised Electronically 5/13 OVERVIEW Cutaway View Optional Delayed Action Valving Optional: DA Delayed Action Closing Sweep Speed Latch Speed S D S L Backcheck Cushioning Backcheck Positioning Sweep
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PULL SIDE) STOP FACE (PUSH SIDE) The 4040T SMOOTHEE is LCN s most flexible heavy duty track closer designed specifically for interior doors in institutional and
More information1461 Series Door controls
1461 Series Door controls Fire Rated: Tested on fire door assemblies in accordance with ustralian Standards, refer fire door manufacturer for specific approval details The LCN 1461 Series is a non-handed
More informationCONCEALED CLOSER SERIES
CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n
More information1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer
Medium duty cast aluminum door closer LCN quality and value, backed by a 25-year warranty. The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance
More information7500/7700 SERIES. Institutional Door Closer
Institutional Door Closer Page Revised Electronically 5/13, 10/13 7500/7700 SERIES overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality.
More informationFinishes/Colors/ Powder Coat
Features The 4030 is a cast iron, universal closer designed specifically for doors in moderate traffic conditions. This versatile closer compliments the rest of the heavy duty 4000 and offers the choice
More informationDC3000 Series. Door Closers
Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful
More information7100SZ SERIES. Multi-Point Closer/Holder with Motion Sensor
safezone Multi-Point Closer/Holder with Motion Sensor introduction Designed with safety in mind, SafeZone takes door closers to a higher level. SafeZone uses a multi-point, electromechanical closer and
More informationThe 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.
Features The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Certifications Body Construction Fluid Handing Grade 1
More information7500/7700 Series. Institutional Door Closers
7500/7700 Series Institutional Door Closers OVERVIEW Features Non-handed Rack-and-pinion design Cast aluminum body 2-3/16" (56mm) projection 1-1/2" (38mm) diameter piston 5/8" (16mm) diameter pinion journals
More information5300 Series. Architectural Commercial Door Control
5300 Series Architectural Commercial Door Control 5300 SERIES Architectural Commercial Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection American Eagle 5300
More informationSince 1880 The American Original Architectural Series Door Closers
Since 1880 The American Original 8000 Architectural Series Door Closers 8000 Series Door Closers OVERVIEW Standard on all 8000 Series Closers ANSI A156.4, Grade 1 10-year warranty Non-handed UL10C Staked
More information*24828* 1 Installation. Left Hand Shown, Right Hand Opposite. Customer Service
*24828* 4820 24828 Non-Handed/Non-Sized Auto-Equalizer Low Energy Door Operator, Installation and Adjustment of Door Operator Installation Instructions Long Cover Cover Insert Cover Left Hand Door Right
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-334-5625 2 Table of Contents Pages 3-5...1000 Series-Surface Mounted Pages 6-7...2030 & 3130 Series - Concealed Pages 8-15...4000 Series - Heavy-Duty Surface Mounted
More informationDoor Closer Cycle. How to Select the Proper Closer. Things to Consider
Door Control Closer Spring Adjustment Not Shown in Door Closer Cycle Diagram Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount
More informationU1500. Surface Applied Door Closers
U1500 Surface Applied Door Closers U1500 SURFACE APPLIED DOOR CLOSERS U1500 SERIES SURFACE CLOSERS CONTENTS U1500 Surface Applied Door Closers Technical Details/Specifications 3 Features 3 Ordering Guide
More information4840 with EDA arm and 459 Door Loop
PARALLEL ARM (PUSH SIDE) MOUNTING The 4840 AUTO EQUALIZER is LCN s pneumatically powered MULTI- DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the
More informationKEANE MONROE a member of the record group
SERIES 3000 / 3100 MICROPROCESSOR CONTROL REGULAR ARM SLIDE ARM / SLIDE ARM W/PANIC BREAKAWAY SERIES 3000 / 3100 Page 1. INDEX and OPERATOR HANDING The KM Series 3000/3100 operators have been carefully
More information7500/7700 Series. Institutional Door Closers
7500/7700 Series Institutional Door Closers OVERVIEW Features Non-handed Rack-and-pinion design Cast aluminum body 2-1/8" (54mm) projection 1-1/2" (38mm) diameter piston 5/8" (16mm) diameter pinion journals
More information1000 Series surface mounted closers
1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.
More informationNorton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case
ABS-AMERICAN BUILDING SUPPLY, INC. 1601 Series Multi-Sized Closers - Packed 6 per case Features Two Power Ranges: Each series can be adjusted through a range of sizes: Series 1601 Normal Power Range Closers,sizes
More information7500 SERIES. Institutional Door Closer
Institutional Door Closer overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality. Ideal for interior or exterior doors in facilities that
More informationLCN Super Smoothie Adjustable Closer Super Smoothie Adjustable Closer
4041 Super Smoothie Adjustable Closer Parallel Arm Mount Shown 4041 Super Smoothie Adjustable Closer The 4041 SUPER SMOOTHIE is a heavy duty, double lever arm closer for institutional and other high traffic
More information