w110b w110btc maximum power 106 kw hp MAX Operating weight kg kg Bucket capacity m m 3
|
|
- Nicholas Lambert
- 6 years ago
- Views:
Transcription
1 w110b w110btc maximum power 106 kw hp MAX Operating weight Bucket capacity m m 3
2 110B THE NEW NEW CNH TIER 3A ENGINE The new turbo, after cooled, electronically controlled CNH engine mounted on the W110B is a jewel of technology which utilises the direct injection Coon Rail and EGR systems to drastically reduce fuel consumption, noise and pollution. It features 4 valves per cylinder, higher maximum power 106 kw at lower r.p.m., an increased maximum torque in respect of the previous model and an electronically controlled Multiple Work Mode. HYDRAULIC SYSTEM The Load Sensing, Closed Centre hydraulic system, delivers its power when and where it is needed. It also allows simultaneous movements independently from power required and engine r.p.m. Steering effectiveness and safety are assured by a demand valve which prioritises the diversion of the required flow from the pump to the emergency steering gear pump, which is independent and automatic. A highly efficient system that contributes towards improved fuel economy, reduced heat generation and which optimizes cycles and production. AXLES Front and rear axles feature: - Standard Limited Slip differential - HD outboard planetary reduction final drives - Maintenance-free outboard wet disc brakes - Rear axle oscillation up to 24 All that means improved traction on slippery ground conditions, extended tyre life thanks to reduced spin, reduced stress on the axle shafts by developing torque at the wheels and enhanced confidence when working on rough and uneven ground for higher safety, durability and reduced operating costs. 2
3 LOOK OF PERFORMANCE EXCLUSIVE COOLING SYSTEM The New Holland advanced and exclusive Cooling Module, is a cube positioned in the centre of the machine with all radiators mounted around three of its sides and the hydraulic tank positioned in the centre, to optimise both space and cooling effect. A hydraulically driven fan, automatically activated by a thermostatic sensor, draws fresh clean air from outside through the radiators and the tank and blows it over the engine to the rear of the machine. The fan is reversible to easily clean the radiators.the tank position, high on the pump, eliminates risk of damage. An exclusive feature that enhances component efficiency and durability. NEW SPACE LAB CAB A modern, safe and comfortable cab featuring: - Bucket corners, wheels and 360 outstanding visibility - Easy entrance thanks to a 580 wide door and steps with larger anti-slip treads - Internal volume increased by 13% - integrated ROPS and FOPS structure and tinted safety glass - Standard pressurization and optional climatisation - Fingertip loader control A cab designed to grant maximum operator comfort and safety for increased production and profitability. 3
4 110B THE NEW TIER 3A COMMON RAIL ENGINE POWER This new CNH Coon Rail engine is a jewel of technology, designed to reduce fuel consumption and pollution. It features higher maximum power 106 kw at lower crankshaft revolution 1800 r.p.m. (versus 2000 r.p.m of the previous model)., increased maximum torque of 61 danm and electronically controlled Multiple Work Modes. The Coon Rail system assures the injection of fuel in the cylinders at very high pressure, optimising nebulisation and mix with an increased quantity of turbocharged and after-cooled air, thus delivering a perfect and total fuel combustion. In addition, the EEMS (Engine Electronic Management System) controls the right moment to introduce the right quantity of fuel in the cylinders. These features provide higher engine efficiency and lower fuel consumption and, thanks to the EGR (Exhaust Gas Recirculation), part of the exhaust gas is reintroduced in the cylinders, reducing the combustion temperature and contributing to reduced emissions of Particulate and of NOx, the production of which is proportional to the combustion temperature. This electronically controlled CNH engine features Multiple Work Modes. The operator can select one of the following electronically pre-set power modes, depending on the type of job in hand: Maximum power: 106 kw/142 hp, for very tough conditions Standard power: 96 kw/129 hp, for normal loading conditions Economy power: 82 kw/110 hp, for light load and carry applications. An Automatic power mode can be also selected to automatically match the engine power curve, between maximum power and standard power, to the machine application. A new, durable, efficient, comfortable and economic engine which contributes to reduced operating costs and increased profits. 4
5 OF DURABILITY & EFFICIENCY INTEGRATED HYDRAULIC AND STEERING SYSTEM The W110B hydraulic system consists of a new variable displacement, axial pistons pump Load Sensing regulated. The pump delivers 134 l/min at a maximum pressure of 250 bars. Steering is soft, prompt and easy thanks to a demand valve which prioritises the diversion of the necessary flow to the steering cilinders. If steering is not required all the hydraulic oil is available for the front loader to deliver fast, efficient and productive cycles. A small gear pump driven by an electric motor, which automatically switches on in case of engine shutoff, provides emergency steering, for operator safety and comfort. The closed centre piloted control valve allows simultaneous movement under every load and engine speed condition. In addition, controls are power assisted, with electromagnetic detent and the loader section of the control valve includes floating function. Hydraulic and Steering: an integrated system which features operator comfort as well as top class safety, controllability and efficiency. 5
6 110B THE POWER THE EXCLUSIVE NEW HOLLAND COOLING MODULE AIR FLOW Air-Air AIR FLOW A.C. condenser Radiator FRONT OF MACHINE Hydraulic oil AIR FLOW TOWARDS ENGINE AIR FLOW Transmission oil A.C.S. (Advanced Cooling System) The exclusive New Holland Cooling Module This exclusive Cooling Module looks like a cube positioned in the centre of the machine. All radiators are located around three sides of the cube to optimise both space and cooling effect. The coolant radiator is on the left-hand side while the hydraulic oil and transmission oil radiators are positioned in parallel on the opposite side. The engine after-cooler radiator and the air conditioner condenser are on top of the cube, also fitted in parallel. To optimise the cooling effect of a fresh and clean air flow, the hydraulic oil tank is located inside the cube and can be easily reached thanks to the hinged liftable condenser of the airconditioning system. The position of the hydraulic tank, high above the pumps, avoids the risk of damage, increasing the pump s durability. A variable speed hydrostatic fan, automatically activated by a thermostatic sensor, with eight plastic blades, draws fresh and clean air from outside through the radiators and the hydraulic oil tank. A switch in the cab allows the operator to reverse the fan for easy and automatic radiator cleaning. A real comfortable, durable, and efficient improvement offered by New Holland. 6
7 OF novelty BETTER BALANCE AND STABILITY The use of the compact and centrally mounted Cooling Module results in a wider free space in the back of the rear frame. This innovative solution has allowed the New Holland engineers to reposition the engine and its components all the way back on the rear frame. Consequently, the centre of gravity is also moved backwards in a more convenient position to better counterbalance the loading effect. Furthermore the machine gauge has been enlarged thus improving dynamic stability. Stability, which can be improved by mounting, on request, larger tyres and L.T.S. (Load Travel Stabiliser) device. A modern engine hood, which enhances rear visibility, has also been added. Optimum stability and better rear visibility means greater operator safety and confidence, shorter cycle time, higher productivity: all which adds up to higher profitability. 7
8 110B THE POWER SPACE LAB CAB The New Holland W110B is now equipped with a completely new designed and advanced cab featuring outstanding internal and external improvements. Space means that: Access to the cab has been improved thanks to the 580 wide door (80 wider), which can be locked back at 180 deg., and to the new wider steps with larger anti-slip treads. Internal volume has been increased by 13% and the glass area enhanced to provide perfect bucket and 360 deg. visibility. The steering column is tiltable and includes a high-tech dashboard, enabling easy functional checks from every position. The new contoured and suspended seat, adjustable in all directions, incorporates a retractable seat belt and adjustable armrests. It can be supplied with optional head rest to let the operator work with maximum comfort in an extremely low noise atmosphere. 8
9 OF SAFEty & COMFORT Lab means an advanced laboratory where Vital information on the main components is provided by the new on-board computer and displayed on the new multi-language, high-tech digital LCD screen located on the dashboard just in front of the operator for easy reading; The "car standard" cab features an integrated ROPS and FOPS structure with tinted safety glass. Standard pressurisation, optional climatisation and FM radio, low noise level and modern and elegant interiors provides the operator with pleasant and comfortable working conditions, regardless of the external weather conditions. A machine cab several steps ahead of the rest in terms of state-of-the-art technology. A cab designed to provide maximum operator comfort and safety, allowing him to fully concentrate on the job in hand for better performance and higher productivity. 9
10 110B THE MAINTENANCE AND SERVICE POWER The W110B is designed for simple and easy maintenance and service procedures thanks to its excellent ground level access to all the most important components and to the new high-tech digital display located on the dashboard, which keeps the operator fully aware of all machine s main functions, such as engine and transmission diagnostics, error reporting and warning prompts. Wide side panels, that open and close with a seagull wing movement, are light to lift and automatically self-locking in a safety position thanks to compressed air cylinders. 10
11 OF ECONOMY They give iediate access to most of the engine components, including the high pressure injection pump, alternator, fuel/water separator, engine oil filter, fuel filter, air filter and the engine electronic control panel. Access to the hydraulic tank is provided by a third liftable panel, which is located on the top of the engine hood, behind the cab. Grouped together in a protected and easilyaccessible remote position on the rear left side of the machine are the hydraulic oil and the engine oil and coolant plugs, allowing easy and ecological discharge of fluids. All this adds up to maximum comfort, safety, efficiency and economy in the dayto-day use of the New Holland W110B. 11
12 110B Specifications ENGINE TIER 3A Maximum power at 1800 rpm (ECE R 120) kw/142 hp Net flywheel power (SAE J1349)...92 kw/123 hp Rated engine speed rpm Make and model...cnh 445TA/EGE Type...Diesel, Coon rail, turbo, aftercooler, electronic injection Total displacement l N of cylinders...4 Bore x stroke x 132 Maximum torque at 1600 rpm...61 danm Lubrication with gear pump The engine comforms to European requirements for low exhaust emission in accordance with directive 97/68/EC TIER 3A. ENGINE MULTIPLE WORK MODES The latest generation CNH TIER 3A coon rail engine, electronically controlled, features multiple work modes. According to the type of application, the operator can select the following engine power modes: - Maximum power kw/142 hp, for very tough conditions - Standard power...96 kw/129 hp,for normal loading conditions - Economy power...82 kw/110 hp, for light load & carry applications - Automatic power mode:to automatically match the power curve to the application. Perfect eletronic control to get the best performances in every type of job while contributing to reduced fuel consumption. ELECTRICAL SYSTEM Voltage...24 V Batteries, in series Capacity Ah - Type...maintenance-free Starter motor...4 kw Alternator capacity...70 A with tyres Safety device prevents engine starting in gear Electronic Transmission System (ETS): allows the operator to dedicate attention to the work cycle. The on-board computer automatically finds the right gear in relation to the type of work. HOLD function to maintain selected speed with the machine operating on a slope. KICK-DOWN function to shift from 2nd to 1st gear when high pushability is required. DOWNSHIFT function to select the most suitable speed with the machine on a slope. Low gears favour the use of the engine brake function and consequently reduce brake use. Forward and reverse control switch. AXLES Rigid front axle, oscillating rear axle designed for heavy duty applications Rear axle oscillation...24 Rear wheel vertical travel Limited slip differentials supplied standard. Hermetically sealed final drives and wet disc brakes BRAKES Service brakes...self-adjusting Type...wet disc brakes on all four wheels Servo-assisted hydraulic brake circuit. Independent circuit for each axle. Control pedal located to left of steering column. Electrical transmission disengagement switch. The brake circuit complies with the following international standards: ISO 3450, CEE 71/320, SAE J1473 Parking brake: spring applied hydraulically released caliper disc brake on trasmission output shaft. Electrical control by means of switch in cab. TORQUE CONVERTER Type...single stage / single phase Torque multiplication ratio : 1 TRANSMISSION Type: PowerShift countershaft design with four forward and three reverse speeds Control: single lever electric fingertip type. Forward speeds...km/h Reverse speeds TYRES Type...tubeless Radial GP-2B XHA XTLA * *Require to limit rear axle oscillation to 16 HYDRAULIC SYSTEM Type...load sensing circuit, closed centre Pump...variable displacement -axial pistons feeding the integrated implement and steering system Max. flow delivery l/min Max. working pressure bar Control valve...2 spool 3 spool
13 Control...piloted dual lever piloted, single lever Double-acting hydraulic cylinders Booms...2 Bore x stroke x 783 Bucket...1 Bore x stroke x 529 Operating time Lift s Lower empty s Dump s Hydraulic lines and connecting flanges are equipped with O-ring seals. L.T.S. device Load Travel Stabiliser. Invaluable for loading and transport on uneven terrain. STEERING Type...Orbitrol, hydraulically actuated with priority valve Pump...utilises the hydraulic system pump Max. flow rate...80 l/min Max. working pressure bar Cylinders...2, double acting Bore x stroke...64 x 463 Emergency steering circuit with electric motor activated by the onboard computer. CAB ROPS/FOPS modular cab. Excellent, all-round, visibility. The ROPS/FOPS cab complies with the following standards: ROPS - EN FOPS - EN ISO 3449 CAPACITIES Litres Lube oil Coolant Fuel tank Transmission oil Hydraulic system Axles F/R BUCKET SELECTIONS MATERIAL DENSITY (/m 3 ) % 100% 95% BUCKET FILL FACTOR BUCKET CAPACITY (m 3 )
14 110B DIMENSIONS X 43 Y 3280 R PerformanceS BUCKET TYPE Bucket capacity m 3 Bucket weight Bucket width Max height with boom raised Dump height at 45 X Reach at 45 Y Overall length (bucket on ground) Turning radius R (bucket at carry position) m Breakout force dan Static tipping load 0 40 Max operating weight GENERAL PURPOSE WITH TEETH WITH CUTTING WITH TEETH WITH Q.C.** AND SEGMENTS EDGE EXTENSION TEETH CUTTING EDGE X,Y At bucket cutting edge ** With Quick Coupler Note: All performance data and specifications based on a unit with 17,5x25 XTLA Radial tyres and ROPS cab. All data is obtained in compliance with the latest applicable SAE Recoended Practices including J732c, J742b and ISO 6746/1, ISO 6746/2 and ISO
15 W110BTC with BUCKET - DIMENSIONS With quick coupler Y X PerformanceS Bucket capacity m 3 Bucket weight (including Quick Coupler) Bucket width Dump height at 45 X Reach at 45 Y Overall length (bucket on ground) Turning radius (bucket at carry position) Breakout force BUCKET TYPE GENERAL PURPOSE m dan Static tipping load: 0 40 Max operating weight WITHOUT TEETH WITH TEETH WITH CUTTING EDGE WITH TEETH AND SEGMENTS X,Y At bucket cutting edge 965 PerformanceS PALLET FORK Fork length Fork weight (including Quick Coupler) Ground to top of tine clearence Reach with arms horizontal Overall length (tines on ground) Operating load - rough terrain - firm and level ground Static tipping load (level arms, level fork, 600 load center): Note: All performance data and specifications based on a unit with XTLA Radial tyres and ROPS cab. All data is obtained in compliance with the latest applicable SAE Recoended Practices including J732c, J742b and ISO 6746/1, ISO 6746/2 and ISO Operating weight
16 standard EQUIPMENT 70 A alternator voltage regulator A.C.S., Advanced Cooling Module centrally mounted with integrated hydraulic oil tank for: - transmission oil - engine coolant - hydraulic oil - air to air aftercooler - air conditioner condenser (if equipped) Antifreeze Automatic return-to-dig Bucket and lift levers with hydraulic power assist and electromagnetic detent Bucket position indicator Centrally located fuse box Electrical disconnect Emergency steering Four-wheel drive Front and rear halogen flood lights Full flow hydraulic system with 10 micron filter Horn Hydraulic driven fan Hydraulic wet disc brakes Instrumental Cluster: Analog Gauges: - Transmission Temperature - Engine Coolant Temperature - Hydraulic Oil Temperature - Fuel Level Audible and Visual alarms: - Cautionary and critical Levels - Directional/Brights Indication - Low Fuel - Directional Signals - Low Oil Pressure LCD Screen: - Hour Meter - Time - F/N/R Indication - Trip computer - Metric/English - Warning Prompts - Engine Speed - Automatic Trans Indication - DeClutch Indication - Fuel Consumption - Engine Diagnostic - Error Reporting - Travel Speed - Current Gear Selection - Engine Mode Indication - Multiple Languages - Transmission Diagnostics Limited slip differentials axles Planetary axles Power steering Remote drain points Retractable seat belt ROPS/FOPS Cab Single lever electrically actuated proportional Powershift transmission Side covers Spring applied hydraulic releases disc parking brake Suspended and adjustable cloth seat Tail lights and stop lights combined Tilt steering column Tubeless tires Two-element dry-type air cleaner Two batteries of 110 Ah each OPTIONS 2 spool valve with joystick 3 spool valve with 3 levers 3 spool valve with joystick and 1 lever Air suspended and fully adjustable cloth seat Automatic Airconditioner Buckets selection with teeth and cutting edge Cold weather package Fire extinguisher Head rest Italian homologation LTS Load Travel Stabiliser Quick Coupler Radio Rotating beacon Transmission guard Transfer fuel pump kit Tool box TUV homologation Wide choice of tyres Wide fenders with LH and RH steps Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific details. AT YOUR OWN DEALERSHIP The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. company may at any time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of the product described in this brochure. Illustrations do not necessarily show products in standard conditions. The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and are subject to variations within normal manufacturing techniques. Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. Printed in Italy - LEADER Firenze - Cod GB - Printed 07/08 Printed on recycled paper CoC-FSC CQ Mixed sources
w130b w130btc maximum power 128 kw hp MAX Operating weight kg kg Bucket capacity m m 3
w130b w130btc maximum power 128 kw - 172 hp MAX Operating weight 12 940 13 055 Bucket capacity 2.0-2.4 m 3 2.0-2.1 m 3 130B Specifications ENGINE TIER 3A Maximum power at 1800 rpm (ISO 14396/ECE R 120-SAE
More informationw170b w170btc MAXIMUM power 145 kw hp MAX Operating weight kg kg Bucket capacity m m 3
w170b w170btc MAXIMUM power 145 kw - 194 hp MAX Operating weight 14 840 14 670 Bucket capacity 2.4-2.8 m 3 2.4-2.5 m 3 W170B Specifications 8 ENGINE TIER 3A Maximum power (ISO 14396/ECE R 120-SAE J 1995)...145
More informationw130b w130btc maximum power 128 kw hp MAX Operating weight kg kg Bucket capacity m m 3
w130b w130btc maximum power 128 kw - 172 hp MAX Operating weight 12 940 13 055 Bucket capacity 2.0-2.4 m 3 2.0-2.1 m 3 130B THE NEW NEW CNH TIER 3A ENGINE The new turbo, aftercooled, electronically controlled
More informationnet flywheel power 74 kw - 99 hp max operating weight kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150B BLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
More informationTIER 3. W130C 4.4 ton m t/h 12.5 ton 172 hp
TIER 3 STANDARD BUCKET PAYLOAD BUCKET VOLUME PRODUCTIVITY (50 m DISTANCE) OPERATING WEIGHT MAX GROSS POWER W130C 4.4 ton 2.1-5 m 3 227 t/h 12.5 ton 172 hp THE MAIN COMPONENTS OF OUR W 3 1 2 2 1 MULTIPLE
More informationE16B E18B Net flywheel power kw - 15 hp Operating weight (max.) kg kg Rear end swing radius mm Bucket capacity
E16B E18B Net flywheel power 11.2 kw - 15 hp Operating weight (max.) 1 700 kg 1 780 kg Rear end swing radius 1 065 Bucket capacity 0.028-0.069 m 3 OUTSTANDING PERFORMANCE, HIGH productivity Engine complies
More informationnet flywheel power 70 kw - 94 hp max operating weight kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 70 kw - 94 hp max operating weight 16 200 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150 BLADE SHORT RADIUS & EXCAVATOR DOZER POWER ANGLE TILT (PAT) DOZER BLADE 6 way - up/down - angle - both
More informationHITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3
HITACHI LX290E engine rated power 228 kw / 306 HP operating weight 21 455-23 075 kg bucket capacity 4.0-4.5 m 3 EQUIPMENT Engine Steering Make............................................. Isuzu Model........................................
More informationWHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version
ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket
More informationNEW COMMON RAIL TIER 3A ENGINE MECHANICAL OR pilot COMMAND CONTROLS High front loader performance
NEW COMMON RAIL TIER 3A ENGINE MECHANICAL OR pilot COMMAND CONTROLS High front loader performance NEW CNH COMMON RAIL TIER 3 A ENGINE Increased torque Increased performance Increased productivity with
More informationMH5.6. Net flywheel power 118 kw hp Maximum operating weight kg Bucket capacity (SAE) m 3 PROVEN PERFORMANCE
MH5.6 Net flywheel power 118 kw - 160 hp Maximum operating weight 20 430 kg Bucket capacity (SAE) 0.52-1.10 m 3 PROVEN PERFORMANCE MH5.6WHEELED Latest technology Highest comfort Easy handling Outstanding
More informationWA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.
WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL
More informationE20.2SR. net flywheel power. operating weight (MAX) REAR END SWING RADIUS. bucket capacity. 17 kw - 23 hp. 17 kw - 23 hp 17 kw - 23 hp
net flywheel power E20.2SR 17 kw - 23 hp E22.2SR E27.2SR 17 kw - 23 hp 17 kw - 23 hp operating weight (MAX) REAR END SWING RADIUS 2 230 kg 2 550 kg 2 760 kg 700 740 750 bucket capacity 0.035-0.088 m 3
More informationL45B VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER L45B Gross Power: SAE J1995 81/110 kw/hp Net Power: SAE J1349 73/99 kw/hp Operating Weight: 8,2-8,4 t Capacities: 1,3-2,5 m 3 High-performance, low environmental impact diesel
More informationEngine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications
Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249
More information521F/XT/XR ARTICULATED
521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104
More informationMaximum operating weight. E485BEH kg. E485LCH kg. Bucket capacity
Net flywheel power 0 kw - 0 hp Maximum operating weight Bucket capacity ELCH 0 0 kg EBEH 00 kg ELCH EBEH.-. m.-.0 m in technology in productivity and consumption in comfort and safety in accessibility
More informationCOMMON RAIL TIER 3A ENGINE MECHANICAL OR pilot COMMAND CONTROLS High front loader performance
COMMON RAIL TIER 3A ENGINE MECHANICAL OR pilot COMMAND CONTROLS High front loader performance 100B CNH COMMON RAIL TIER 3 A ENGINE Increased torque Increased performance Increased productivity with lower
More informationDoosan Infracore DL220 TECHNICAL DATA
Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)
More informationSTD OFFSET Net flywheel power. 42 kw - 56 hp Max operating weight kg kg bucket capacity m 3
STD OFFSET Net flywheel power 42 kw - 56 hp Max operating weight 7 835 kg 8 65 kg bucket capacity.23 -.35 m 3 7BSR* TOP PERFORMANCE PACKED INto A VERY COMPACT MACHINE Productivity (m 3 /l): + 22% vs. E7SR
More informationE200SR/E235SR. E200SR 92 kw hp. E235SR 116 kw hp kg kg m m 3. net flywheel power
E200SR/E235SR net flywheel power E200SR 92 kw - 123 hp E235SR 116 kw - 156 hp operating weight (MAX) 21 000 kg 24 900 kg bucket capacity 0.51-0.80 m 3 0.51-0.93 m 3 www.newholland.com E200SR/E2 THE SR
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More informationEngine Gross Power Operating Weight Bucket Capacity 835H
Engine Perkins 1204F Tier 4 Final Gross Power 131 hp (98 kw) Operating Weight 23,760-24,640 lbs (10,800-11,200 kg) Bucket Capacity 2.5 yd 3 (1.9 m 3 ) 835H 2 3 4 MORE POWER LESS CONSUMPTION The new 835H
More information534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
More information721F/XT/XR WHEEL LOADERS
721F/XT/XR WHEEL LOADERS ENGINE Make FPT Model F4HFE613Y Tier 2 certified Type 4-stroke, turbocharged and air-to-air-cooled Cylinders 6-cylinder in-line Bore/Stroke 4.09 in x 5.20 in (104 X 132 mm) Displacement
More informationDL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationB115B - B110B/BTC B90B. up to 1,2 m3 bucket
B115B - B110B/BTC B90B bucket capacity Engine POWER up to 1,2 m3 bucket 110 hp 1,0 m3 bucket 100 hp B115B/B110B/B110BTC/ ENVIRONMENTAL EFFICIENCY 10% reduction in fuel consumption and emissions BEST IN
More informationDL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationigh-performance, low environmental impact diesel engine: quiet, low emissions, economical fuel consumption.
VOLVO WHEEL LOADER L50F ross Power : G SAE J19 = 87 kw/ 117 hp N et Power : SAE J1349 = 85 kw/ 115 hp O perating Weight : 9.4 9.9 t B ucket Capacities : 1.4 2.5 m3 igh-performance, low environmental impact
More informationE175. Net flywheel power Maximum operating weight. 82 kw hp kg Bucket capacity m 3 PROVEN PERFORMANCE
E175 Net flywheel power Maximum operating weight 82 kw - 112 hp 18 700 kg Bucket capacity 0.25-0.93 m 3 PROVEN PERFORMANCE 175 * Evolution in comfort and safety Evolution in productivity and low fuel consumption
More informationMH2.6/3.6. NET FLYWHEEL POWER 74 kw - 99 hp 87 kw hp. OPERATING WEIGHT kg kg. BUCKET CAPACITY m
MH2.6/3.6 MH2.6 MH3.6 NET FLYWHEEL POWER 74 kw - 99 hp 87 kw - 117 hp OPERATING WEIGHT 10 000 kg 12 600 kg BUCKET CAPACITY 0.01-0.28 m 3 0.23-0.57 m 3 PROVEN PERFORMANCE H2.6/3.6 MAiN FEATURES AND PERFORMANCES
More informationMH6.6. Net flywheel power 129 kw hp Maximum operating weight kg Bucket capacity (SAE) m 3 PROVEN PERFORMANCE
MH6.6 Net flywheel power 129 kw - 173 hp Maximum operating weight 21 500 kg Bucket capacity (SAE) 0.46-1.35 m 3 PROVEN PERFORMANCE MH6.6WHEELED Latest technology Highest comfort Easy handling Outstanding
More informationNet flywheel power Max operating weight. 42 kw - 56 hp kg bucket capacity m 3
Net flywheel power Max operating weight 42 kw - 56 hp 8 595 kg bucket capacity 0.23-0.35 m 3 80BMSR* TOP PERFORMANCE AND FLEXIBILITY PACKED INto A NEW NEW NEW NEW NEW NEW VERY COMPACT MACHINE Productivity
More informationE245. Net flywheel power operating weight (MAx) 118 kw hp kg BUCKET CAPACITY m 3 PROVEN PERFORMANCE
E245 Net flywheel power operating weight (MAx) 118 kw - 160 hp 24 420 kg BUCKET CAPACITY 0.52-1.31 m 3 PROVEN PERFORMANCE 245 * Evolution in technology Evolution in productivity and consumption Evolution
More informationDL350 TECHNICAL DATA
DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED
More informationE805. Net flywheel power Operating weight (max.) 340 kw hp kg Bucket capacity m 3 PROVEN PERFORMANCE
E Net flywheel power Operating weight (max.) kw - hp kg Bucket capacity. -. m PROVEN PERFORMANCE Specifications TIER EMISSIONED ENGINE Net flywheel power (ISO )... kw/ hp Rated rpm... Make and model...isuzu
More informationWA95-3 WA95-3 WHEEL LOADER. NET HORSEPOWER 55 kw 75 PS OPERATING WEIGHT kg BUCKET CAPACITY 0,9-1,6 m³
WA 95 WHEEL LOADER NET HORSEPOWER 55 kw 75 PS OPERATING WEIGHT 6.020 kg BUCKET CAPACITY 0,9-1,6 m³ Wheel loader AT A GLANCE The new, compact wheel loader : is more comfortable, easier to maintain and more
More informationWHEEL LOADERS LW170.B. Specifications.
WHEEL LOADERS Specifications LW170.B www.newhollandconstruction.com LW170.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...132.8 (3374 mm) B. Height to top of exhaust...114.8
More information534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)
534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity
More information9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")
9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator
More information1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation
1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177
More informationCat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.
Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator
More information821F/XR WHEEL LOADERS
821F/XR WHEEL LOADERS ENGINE Make Model Type Cylinders Bore/Stroke FPT F4HFE613X Tier 2 certified 4-stroke, turbocharged 6-cylinder in-line 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7 L)
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More information621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
621E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EDB, Tier III certified 4-stroke, turbocharged and air to air cooled Cylinders 6 Bore/Stroke 4.11 in x 5.20
More informationENGINE HYDRAULIC SYSTEM. TRANSMISSION 5 speed T/M 4 speed T/M Travel speed STEERING SYSTEM AXLES SERVICE REFILL CAPACITIES OVERVIEW CAB TIRES SOUND
ENGINE Engine / Model Cummins / QSB6.7 Maximum Gross Power (2,200 rpm) SAE J1995 168 kw 225 hp Maximum Net Power (2,200 rpm) SAE J1349 166 kw 222 hp Peak Gross Torque (1,500 rpm) SAE J1995 1044 N m 770
More informationwheel Loaders w110b w110b tc W110b lr w130b w130b tc W130b lr
w110b w110b tc W110b lr w130b w130b tc W130b lr wheel Loaders New Tier III Certified Engines with Four Work Modes Advanced Cooling System for Better Cooling & Balance Three Configurations Z-Bar, Tool Carrier,
More informationWheel Loader. Cummins Tier 2 engine: 271 hp (202 kw) buckets from 3.60 m 3 to 4.30 m 3 Breakout force: dan. Courtesy of Machine.
Wheel Loader Cummins Tier 2 engine: 271 hp (202 kw) buckets from 3.60 m 3 to 4.30 m 3 Breakout force: 21 920 dan C O M M I T T E D T O Y O U R N E E D S Engine Make...Cummins Type...QSM11 Standard mode
More informationERGONOMIC ENVIRONMENT
WHEEL LOADER 521E-E XT 521E 521E XT Engine Horsepower 106 kw/142 hp 106 kw/142 hp Operating weight (max.) 10 464 11 906 Bucket capacity 1.7-1.9 m 3 1.6-1.8 m 3 ERGONOMIC ENVIRONMENT The Case E series cab
More informationPressure system with spin-on filter & cooler Dual-stage dry type with safety element and evacuator valve
Engine Manufacture and Model Non-Road Emission Standards Displacement Net Peak Power (ISO 9249) Net Peak Torque (ISO 9249) John Deere PowerTechTM4045T turbocharged, standard EPA Tier 2 / EU Stage II emissions
More information621F/XT/XR ENGINE (CONTD.)
621F//XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model Type Cylinders Bore / Stroke Case / FPT F4HFE613Z Tier 4 Interim certified 4-stroke, turbocharged and air-to-air-cooled 6-cylinder in-line
More informationSPEC SHEET ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E245C 129 kw hp Kg 0.52 m m 3
SPEC SHEET ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY E24C 129 kw - 13 hp 2418 Kg 0.2 m 3-1.31 m 3 E24C SPECIFICATIONS ENGINE TIER 4 INTERIM Make and model... FPT F4HFE13S-A0002 Engine Power (ISO
More information1021F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1021F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614C Emissions Certification Tier 4 Interim Type 4-stroke, turbocharged and air-to-air cooled Cylinders 6-cylinder in-line Bore/Stroke
More informationWH 716. Telescopic Handler WH716. LIFTING HEIGHT mm LIFTING CAPACITY kg OPERATING WEIGHT kg
WH 716 Telescopic Handler WH716 LIFTING HEIGHT 16.100 mm LIFTING CAPACITY 4.000 kg OPERATING WEIGHT 11.590 kg Walk-Around The WH716 belongs to the series of Komatsu telescopic handlers, which offers: -
More informationNET POWER 60 kw / rpm OPERATING WEIGHT kg WB91R-5 91R-5. Rigid Backhoe Loader WB91R-5
NET POWER 60 kw / 80 HP @ 2.200 rpm OPERATING WEIGHT 6.750 kg WB 91R-5 Rigid Backhoe Loader B ACKHOE LOADER WALK-AROUND Tradition and innovation The belongs to the latest generation of Komatsu backhoe
More informationWA 90. Wheel Loader WA90-6. ENGINE POWER 59,0 kw / 79, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,9-1,6 m³
WA 90 Wheel Loader WA90-6 ENGINE POWER 59,0 kw / 79,1 HP @ 2.350 rpm OPERATING WEIGHT 6.475-6.740 kg BUCKET CAPACITY 0,9-1,6 m³ Walk-Around Small but powerful! Our new Dash 6 compact wheel loaders further
More informationwheel Loaders w170b w170b tc W170b lr w190b W190b lr
w170b w170b tc W170b lr w190b W190b lr wheel Loaders New Tier III Certified Engine with Four Work Modes Advanced Cooling System for Better Cooling & Balance Three Configurations Z-Bar, Tool Carrier, &
More informationWA 65. Wheel Loader WA65-6. ENGINE POWER 41,0 kw / 55, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,55-1,0 m³
WA 65 Wheel Loader WA65-6 ENGINE POWER 41,0 kw / 55,0 HP @ 2.350 rpm OPERATING WEIGHT 4.640-4.890 kg BUCKET CAPACITY 0,55-1,0 m³ Walk-Around Small but powerful! Our new Dash 6 compact wheel loaders further
More informationF-SERIES WHEEL LOADERS 721F I 821F FASTER, FUEL EFFICIENT TIER 3 EU STAGE IIIA. EXPERTS FOR THE REAL WORLD SINCE 1842
F-SERIES WHEEL LOADERS 721F I 821F TIER 3 EU STAGE IIIA FASTER, FUEL EFFICIENT www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 FAST, PRODUCTIVE, FUEL EFFICIENT BE READY FOR THE BEST: Advanced Engine
More informationWA 70. Wheel Loader WA70-7. ENGINE POWER 36,9 kw / 49, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,75-1,25 m³
WA 70 Wheel Loader WA70-7 ENGINE POWER 36,9 kw / 49,5 HP @ 2.350 rpm OPERATING WEIGHT 5.035-5.380 BUCKET CAPACITY 0,75-1,25 m³ Walk-Around The Komatsu WA70-7 is a powerful all-rounder with an enhanced
More informationCK20-1 CK30-1. Skid Steer Loader CK 20/30
CK 20/30 Skid Steer Loader CK20-1 CK30-1 ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @ 2.500 rpm OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY
More informationNET HORSEPOWER 40.3 kw rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SKID STEER LOADER. Photos may include optional equipment.
NET HORSEPOWER 40.3 kw 54 HP @ 2800 rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SK 820 SKID STEER LOADER Photos may include optional equipment. SK820-5 S KID S TEER L O ADER WALK-AROUND Maximum Performance
More informationWHEEL LOADER 938H WHEEL LOADER 938H. Power Generation - Bulk Materials Standards I. GENERAL: DESCRIPTIONS FOR CATERPILLAR MODEL 938H WHEEL LOADER:
Power Generation - Bulk Materials Standards I. GENERAL: This standard is intended to provide specifications for the procurement of Caterpillar Model 938H Wheel Loaders that meet specific area operational
More information530R WHEEL LOADER. Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Net Horsepower 155 kw (208 hp) Operating Weight kg (41,535 lb)
530R WHEEL LOADER Net Horsepower 155 kw (208 hp) Bucket Capacity 2.8 m 3 to 4.5 m 3 (3.7 yd 3 to 5.9 yd 3 ) Operating Weight 18840 kg (41,535 lb) WHEEL LOADER An innovative machine with state-of-the art
More information115SR 135SRL 135SRLC NEW HOLLAND KOBELCO E135SRL. 63 kw 85 hp m3
r'-vu 3 I 115SR 135SRL 135SRLC NEW HOLLAND KOBELCO rt_.415-in 1..1-.. f E115SR E135SRL E135SRLC NET FLYWHEEL POWER 60 kw - 81 hp 63 kw 85 hp OPERATING WEIGHT (MAX) BUCKET CAPACITY 12 800 kg 0.42-0.54 m3
More informationT SERIES BACKHOE LOADER 570T
T SERIES BACKHOE LOADER T SERIES BACKHOE LOADER The family gets wider: The makes available all the well known CASE exclusive features and high performaces to a wider range of customers. With the the return
More information121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3
More informationNET HORSEPOWER 62.6 kw rpm OPERATING WEIGHT 4330 kg 9,546 lb CK30-1 COMPACT TRACK LOADER. Photos may include optional equipment.
NET HORSEPOWER 62.6 kw 84 HP @ 2500 rpm OPERATING WEIGHT 4330 kg 9,546 lb CK30-1 CK 30 COMPACT TRACK LOADER Photos may include optional equipment. CK30-1 C OMPACT T RACK L OADER WALK-AROUND Easy to use
More informationVolvo l60g, L70G, L90G IN DETAIL.
Volvo lg,, IN DETAIL. Engine 6-cylinder, 6 liters inline turbocharged diesel engine with an advanced fuel injection system with the common rail. Fuel is distributed under high pressure from a high-pressure
More information21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED
21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4
More informationSpecifications WHEEL LOADERS LW130.B LONG REACH.
WHEEL LOADERS Specifications LW130.B LONG REACH www.newhollandconstruction.com LW130.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...133.9 (3400 mm) B. Height to top of exhaust...114.8
More information1121F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
1121F XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make FPT Model F2CFE614B Emissions Certification Tier 4 interim Type 4-stroke, turbocharged and air-to-air cooler Cylinders 6-cylinder in-line Bore/Stroke
More informationBACKHOE LOADERS. Turbocharged Perkins Engine Power 100 hp / 74,5 kw Operating Weight 8,1-8,2 tons Bucket Capacity 1,1 m 3
BACKHOE LOADERS Turbocharged Perkins Engine Power 100 hp / 74,5 kw Operating Weight 8,1-8,2 tons Bucket Capacity 1,1 m 3 SPECIAL FEATURES Improved Performance The new generation CUKUROVA 883-885 model
More informationCOMPACT WHEEL LOADER WA65-5. NET HORSEPOWER 40 kw rpm OPERATING WEIGHT kg 10,274-10,780 lb
NET HORSEPOWER 40 kw 54 HP @ 2350 rpm OPERATING WEIGHT 4660-4890 kg 10,274-10,780 lb WA65-5 BUCKET CAPACITY 0.7-1.0 m 3 0.92-1.3 yd 3 WA 65 COMPACT WHEEL LOADER Photos may include optional equipment. WA65-5
More information385B SKID STEER LOADER
Engine Yanmar 4TNV98CT Tier 4 Final Gross Power 72 hp (53.7 kw) Operating Weight 8,250 lbs (3,750 kg) Bucket Capacity 0.66 yd 3 (0.5 m 3 ) 385B SKID STEER LOADER 385B SKID STEER LOADER YANMAR ENGINE Unmatched
More informationSYSTEM 180 AS 90. > The loader specialist. > Swing Shovel Loader m 3
> The loader specialist > Swing Shovel Loader 0.9 1.4 m 3 Let s have a look Tipping loads with standard bucket Working area with 4-in-1 bucket 53.5 kw / 73 hp at 2500 min -1 3.240 kg 100% 80 100% max.
More information521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE413NB Tier 4 Final SCR/DOC 4-stroke, turbocharged
More informationWA 80. Wheel Loader WA80-6. ENGINE POWER 50,0 kw / 67, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,80-1,25 m³
WA 80 Wheel Loader WA80-6 ENGINE POWER 50,0 kw / 67,1 HP @ 2.270 rpm OPERATING WEIGHT 5.520-5.835 kg BUCKET CAPACITY 0,80-1,25 m³ Walk-Around Small but powerful! Our new Dash 6 compact wheel loaders further
More informationF-SERIES WHEEL LOADERS 521F 621F - SPEC SHEET
F-SERIES WHEEL LOADERS 521F 621F - SPEC SHEET FASTER, FUEL EFFICIENT A SAFE INVESTMENT FOR THE TOUGHEST JOBS For the toughest jobs, reliability comes with a perfect control of the oil temperature in the
More informationTD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.
CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199
More informationZL302C VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER ZL302C Gross Power: SAE J1995 22,5/31 kw/hp Net Power: SAE J1349 22/30 kw/hp Operating Weight: 2,1 t Bucket Capacities: 0,3-0,5 m 3 High-performance, low environmental impact
More information921F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
921F Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Type Cylinders Bore/Stroke FPT F4HFE613 Tier 4 Final 4-stroke, turbocharged and air-to-air cooled 6-cylinder
More informationS P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
More information40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment
40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value
More informationSK 820. Skid Steer Loader SK ENGINE POWER 39,9 kw / 53, rpm OPERATING WEIGHT kg OPERATING CAPACITY 900 kg
SK 820 Skid Steer Loader SK820-5 ENGINE POWER 39,9 kw / 53,5 HP @ 2.800 rpm OPERATING WEIGHT 2.940 kg OPERATING CAPACITY 900 kg Walk-Around Highly versatile and compact, the SK820-5 skid steer loader is
More information921F/XT/XR WHEEL LOADERS
921F/XT/XR WHEEL LOADERS ENGINE Make FPT Model F4HFE6131 Tier 2 certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore/Stroke 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7
More informationCOMPACT WHEEL LOADER WA80-5. NET HORSEPOWER 45 kw rpm OPERATING WEIGHT kg 12,434-13,062 lb
NET HORSEPOWER 45 kw 60 HP @ 2350 rpm OPERATING WEIGHT 5640-5925 kg 12,434-13,062 lb BUCKET CAPACITY 0.9-1.25 m 3 1.1-1.6 yd 3 WA 80 COMPACT WHEEL LOADER Photos may include optional equipment. C OMPACT
More information902 Compact Wheel Loader Performance and Versatility Ease of Operation Serviceability pg. 4 pg. 4, 5 pg. 5 Built for tough work
902 Compact Wheel Loader Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 34 kw 45 hp Operating Weight 4360 kg 9600 lb Bucket Capacity 0.6 m 3 0.8 yd 3 Fork Capacity (DIN 24094) 1625 kg 3600 lb
More informationL35B VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER L35B Gross Power: SAE J1995 57/77 kw/hp Net Power: SAE J1349 55/75 kw/hp Operating Weight: 5,9-6,0 t - Z-bar linkage 6,1-6,3 t - TP-linkage Bucket Capacities: 1,05-1,6 m 3 -
More information821E/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
821E/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EBD Tier III Certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20 in
More informationNET HORSEPOWER 66 kw rpm OPERATING WEIGHT 7300 kg 16,090 lb WB146-5 WB146PS-5 BACKHOE LOADER. Photos may include optional equipment
NET HORSEPOWER kw HP @ 00 rpm OPERATING WEIGHT 7300 kg 1,090 lb WB1-5 WB1PS-5 WB 1 BACKHOE LOADER Photos may include optional equipment WB1-5/WB1PS-5 WALK-AROUND B ACKHOE L OADER The Dash 5 Komatsu Backhoe
More informationKUBOTA WHEEL LOADER R065
R KUBOTA WHEEL LOADER R065 Efficiency and comfort are the stand-out features of Kubota s all-new R065 wheel loader, with a powerful engine, superior maneuverability, and a spacious cab. * This information
More informationW50B TC W80B TC COMPACT WHEEL LOADERS
W50B TC W80B TC COMPACT WHEEL LOADERS Certified Tier III Engine with Low Emissions Standard Hydraulic Quick Coupler Compatible with all Skid Steer Loader attachments Boom design provides outstanding visibility
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More information906H. Compact Wheel Loaders
906H Compact Wheel Loaders Cat Cat C3.4 Engine Net Power (SAE J1349) 52 kw 70 hp Weights Operating Weight 5630 kg 12,412 lb Buckets Bucket Capacities 0.75 1.2 m 3 1.0 1.6 yd 3 906H Features Loader Linkage
More informationCOMPACT WHEEL LOADER WA70-5. NET HORSEPOWER 45 kw rpm OPERATING WEIGHT kg 11,155-11,816 lb
NET HORSEPOWER 45 kw 60 HP @ 2350 rpm OPERATING WEIGHT 5060-5360 kg 11,155-11,816 lb WA70-5 BUCKET CAPACITY 0.85-1.25 m 3 1.1-1.6 yd 3 WA 70 COMPACT WHEEL LOADER Photos may include optional equipment.
More informationEC55D. Volvo Compact Excavators t 36.5 kw
EC55D Volvo Compact Excavators 5.4-5.63 t 36.5 kw A machine you can rely on Volvo s EC55D high quality compact excavator is designed to work harder for longer. Using high quality components and Volvo design,
More information950 GC Engine Buckets Weights
950 GC Wheel Loader Engine Buckets Engine Model Cat C7.1 Bucket Capacities 2.5 m 3 to 4.4 m 3 Rated Net Power @ 2,200 rpm ISO 9249 151 kw (202 hp) Weights Rated Gross Power @ 2,200 rpm ISO 14396 168 kw
More information721E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
721E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV 667TA/EED, Tier III certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20
More information1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED
1121G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F2CFE614F Tier 4 Final SCR/DOC 4-stroke, turbocharged and
More information