CTE9000 / CTU9000 Series OEM pressure transmitters for industrial media
|
|
- Justina Sutton
- 6 years ago
- Views:
Transcription
1 FEATURES mbar to 35 bar, 15 to 500 psi gage 1 or absolute 10 pressure 05, 010, 0545, 16 or 420 ma output Field interchangeable All welded stainless steel diaphragm construction EMC according to EN MEDIA COMPATIBILITY Wetted materials: Stainless steel (316L) 9 Housing: Stainless steel (316L), protection class IP 6 (according to DIN EN 60529, NEMA 6) 1 SPECIFICATIONS 11,12 ELECTRICAL CONNECTION Maximum ratings Supply voltage (reverse polarity protection) CTE(M)/CTU CTE(M)/CTU CTE(M)/CTU96, 832 CTE(M)/CTU Maximum load current (source) CTE(M)/CTU90, 1, 6, 1 ma Proof pressure 3 2 x rated pressure Environmental Temperature limits Storage C Operating (media) C Electronic (ambient) C Compensated 050 C ibration (5 to 2000 Hz) g RMS oltage output device 1 / brown out sensor 2 / green 4 / yellow case 3 / white/shield output device 1 / brown N/C sensor 2 / green R L out Mechanical shock g (11 ms) 4 / yellow case 3 / white/shield 1/6 wwwfirst-sensorcom
2 COMMON PERFORMANCE CHARACTERISTICS ( S =15 ±01, T A = C, RH=50 %) Thermal effects 4 ( 050 C) Thermal effects -200 C, 500 C) ( 4 M in T yp Max Offset Span Offset Span mbar/15 psi devices ± 004 ±008 ± 002 ±005 mbar/15 psi devices ± 004 ±008 ± 002 ±005 mbar/15 psi devices ±004 ±002 mbar/15 psi devices ±004 ±002 5 N on-linearity ( BSL) and hysteresi s ± 0 1 ±0 3 Repeatability ±0 1 6 Long term stability ±0 1 noise (0 < f < 1 khz) ±0 1 %FSO/ C %FSO Response time (10 to 90 %) 5 ms D/A resolution 11 bit Power supply rejection Offset ±001 Span ±002 %FSO/ INDIIDUAL PERFORMANCE CHARACTERISTICS ( S =15 ±01, T A = C, RH=50 %) 010 output (R L M in T yp Max CT9N CT9N output (R L M in T yp Max CT9N CT9N /6 wwwfirst-sensorcom
3 INDIIDUAL PERFORMANCE CHARACTERISTICS (cont) ( S =15 ±01, T A = C, RH=50 %) 05 output (R L M in T yp Max CT9N CT9N output (R L M in T yp Max CT9N CT9N ma output (R L = ) M in T yp Max CT9N ma CT9N Power consumption (I = 20 ma) 0 mw L LOAD LIMITATION 420 ma output version 1400 Ohm operating range supply voltage 3/6 wwwfirst-sensorcom
4 OUTLINE DRAWING Connector version NOM 850 (335) 65 (026) 650 (6) 4 vent hole¹ 218 (086) diam G 1/8" (BSP) 1 3 Cable version 65 (026) Detail A 650 (6) NOM 150 (059) M12 x m (84) other lenghts available Pin oltage 1 + s 2 out N/ C 3 Case Case (086) diam G 1/8" (BSP) Shield ent tube Detail A Flying lead end Brown Green White and shield Yellow oltage + s out N/ C Case Case Detail A 148 (058) 92 (036) 40 (016) diam O-ring grove 14 (0055) mass: approx 82 g Note: O-ring included in delivery dimensions in mm (inches) 4/6 wwwfirst-sensorcom
5 RECOMMENDED ACCESSORY (not included in delivery) ZP B: Mating Connector (without cable) ZK x: Connector/cable assembly (x=cable lenghts in m, max 10 m) 365 x = length in m (max 10 m) NOM 60 Shield ent tube Pin PIN CONNECTION Flying lead end 1 Brown 2 Green 3 White and shield 4 Yello w M12x1 Ø 20 Note: For proper function of gage devices the vent tube must have access to the ambient atmosphere dimensions in mm OPTIONAL PRESSURE FITTINGS (brass, nickel plated) Male fittings B C Female fittings G F A D E H Dimensions in mm (inches) A B C D (Hex) 1 /8" BSPT 8 (0315) 13 (0512) 14 (9/16") 1 /4" BSPT 12 (042) 5 5 (021) 14 (9/18") 3 /8" BSPT 115 (0453) 5 (019) 1 (11/16") 1 /2" BSPT 16 (0630) (026) 22 (/8") 1 /8" BSP 1 (0492) 11 (0433) 14 (9/16") 1 /4" BSP 8 5 (0335) 5 (019) 19 (3/4") 3 /8" BSP 1 (0492) (026) 22 (/8") 1 /8" NPT 10 (0394) 13 (0512) 1 (11/16") 1 /4" NPT 14 (0551) 6 (0236) 22 (/8") Dimensions in mm (inches) E F G H (Hex) 1 /8" BSP 5 (019) 15 (0591) 14 (9/16") 1 /4" BSP (026) 20 (08) 1 (11/16") 3 /8" BSP 6 (0236) 20 (08) 22 (/8") 1 /2" BSP 18 (00) 23 (0906) 24 (15/16") 5/6 wwwfirst-sensorcom
6 Specification notes: 1 IP 64 protection is given when the connector is locked For proper function the gage port is vented to the atmosphere through the connector/cable assembly Thus the cable end must have access to the ambient pressure 2 The minimum supply voltage is directly proportional to the load resistance seen by the transmitter For more details see the load limitation diagram 3 Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element 4 Thermal effects are relative to C Signal is clamped at 0 5 Non-linearity refers to Best Straight Line fit Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure 6 Long term stability over 1 year Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure 8 Surge immunity according to EN on request for current output devices 9 When using devices with optional nickel plated fittings, consider the media compatibility of the fittings also 10 Available for pressure ranges from 1 bar (15 psi) absolute upwards only 11 CE-labelling is in accordance with 2004/108/EC 12 The pressure transmitters must not be used as safety accessories according to article 1, 213 of the directive 9/23/EC 13 According to IEC According to IEC ORDERING INFORMATION Calibration E: bar calibration U: psi calibration For mbar ranges only Pressure range CTE9000 series CTU9000 series : 0 mbar 1x5: 015 psi 200: 0200 mbar 003: 03 psi 350: 0350 mbar 005: 05 psi 001: 01 bar 015: 015 psi N01: -1+1 bar N15: psi P01: 0-1 bar P15: 0-15 psi 002: 02 bar 030: 030 psi 003: 03 bar 050: 050 psi 005: 05 bar : 0 psi 010: 010 bar 300: 0300 psi 016: 016 bar 500: 0500 psi 020: 020 bar 035: 035 bar Pressure mode G: gage pressure 1 A: absolute pressure (from 1 bar/15 psi only) CTx (M) 9xxx x x x (C x) Other pressure ranges and options are widely available Please contact First Sensor Cable lenght in m Cable version (optional) signal 0: 010 1: 16 4: 420 ma 6: 0545 : 05 Pressure connection Standard thread Y: G 1/8" (BSP) male, SS (316L) Optional pressure fittings D: 1/8" BSPT male, brass, nickel plated E: 1/4" BSPT male, brass, nickel plated F: 3/8" BSPT male, brass, nickel plated G: 1/2" BSPT male, brass, nickel plated K: 1/8" NPT male, brass L: 1/4" NPT male, brass M: 1/8" NPT male, SS (316L) N: 1/4" NPT male, SS (316L) P: G 1/8" (BSP) male, brass, nickel plated Q: G 1/4" (BSP) male, brass, nickel plated R: G 3/8" (BSP) male, brass, nickel plated S: G 1/2" (BSP) male, brass, nickel plated U: G 1/8" (BSP) female, brass, nickel plated : G 1/4" (BSP) female, brass, nickel plated W: G 3/8" (BSP) female, brass, nickel plated X: G 1/2" (BSP) female, brass, nickel plated First Sensor reserves the right to make changes to any products herein First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of 6/6 wwwfirst-sensorcom
CTE7000 / CTU7000 Series Miniature pressure transmitters
FEATURES 10 mbar to bar, 0.1 to 7 psi gage 1 pressure 0..., 0...10, 0...4., 1...6 or 4...20 ma output Field interchangeable Rugged stainless steel housing EMC according to EN 61326-1 9 MEDIA COMPATIBILITY
More informationCTE8000 / CTU8000 Series
CTE8000 / CTU8000 Series FEATURES 250 mbar to 100 bar, 5 to 1500 psi gage1 or absolute10 pressure 0...5 V, 0...10 V or 4...20 ma output Field interchangeable For many industrial gases and liquids EMC according
More informationBTE2000 / PTE2000 Series Precision stainless steel pressure transmitters
FEATURES...5 to...5 bar,...5 to...5 psi gage 1 For corrosive media in harsh environments 1...6 or... ma output Field interchangeable All welded stainless steel diaphragm construction MEDIA COMPATIBILITY
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
More informationDMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
More informationDCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor
DCT 5 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standart: ± 0.5 % FSO sption: ± 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0...
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationPressure transmitters for industrial applications Type MBS 4510
Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel
More informationDMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma
More informationPressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
More informationPressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
More informationPressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationJUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
More informationIndustrial Pressure Transmitters
Industrial Pressure Transmitters Type S-10, S-11 Applications Hydraulics and pneumatics Test equipment Pump and compressor control Liquid level measurement Special Features Standard ranges available from
More informationSolid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
More informationType A-10 General Purpose Pressure Transmitters
Type A-10 General Purpose Pressure Transmitters Applications Mechanical engineering Machine tools Process control and automation Hydraulics and pneumatics Pumps and compressors Special Features Pressure
More informationPressure Transmitter. Pressure transmitter with compact design Model EDC-K. Electronic. Applications. Special Features.
Pressure transmitter with compact design Electronic Pressure Transmitter Applications Mechanical engineering Machine tools Control and feedback control systems Hydraulics / Pneumatics Pumps/ Compressors
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More informationPressure transmitter for marine applications MBS 33M
Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationHigh temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250
Data sheet High temperature pressure transmitters for heavy-duty applications MBS 2200 and MBS 2250 The compact heavy duty pressure transmitter type MBS 2200 and MBS 2250 are designed for use in severe
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure DRUCK & TEMPERATUR LEITENBERGER GMBH. Stainless Steel Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationFigure 1: WPR2 Dimensions and Hardware
Installation and Operation Instructions WPR2 Series (Max. Line Pressure < 300 PSI) Wet to Wet Differential Pressure Ø0.200" 2.60" 4.47" 5.47" 5.28" 3.00" Precautions Figure 1: WPR2 Dimensions and Hardware
More informationType A-10 General Purpose Pressure Transmitter
General Purpose TRONIC > General Purpose > A-10 Type A-10 General Purpose Pressure Transmitter Standard Features Signal output: 4-20 ma 2-wire or 0-10 V 3-wire Supply voltage: 8-30 DC (14-30 VDC) Process
More informationThermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
More informationPressure transmitter for marine applications MBS 3100 and MBS 3150
Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.
More informationPressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationMid-West Instrument. Series 700 "Wet/Wet" Installation and Operating Instructions. Differential Pressure Transmitter
Mid-West Instrument IM_700/A Series 700 "Wet/Wet" Installation and Operating Instructions Differential Pressure Transmitter 6500 Dobry Dr. Sterling Heights, MI USA Toll Free: 800-648-5778 Ph 586-254-6500
More informationEB100 High Accuracy Miniature Pressure Transducer
Miniature design (body ø11 mm) High Accuracy EMI Protected per CE Compliance Wide Temperature Range Absolute DESCRIPTION The EB100 pressure transducer is the smallest design proposed by MEAS from the UltraStable
More informationType E-10, E-11 Hazardous Area Explosion-proof Transmitters
Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The pressure
More informationMicro-Machined Silicon Transducers
Micro-Machined Silicon Transducers wet/wet differential Pressure Models mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U Precision
More informationPX409 Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to psid
Micro-Machined Silicon Transducers wet/dry differential mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-10 inh2o to 0-1000 psid PX409 Series Standard U 5-Point NIST Traceable
More informationDMP 333. Industrial Pressure Transmitter For High Pressure DRUCK & TEMPERATUR LEITENBERGER GMBH. Stainless Steel Sensor
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationPressure Transmitter JUMO dtrans p30 Type
Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The
More informationMountable with O-ring seal Urea level ±0.5% Accuracy Urea pressure ±2.0 Total Error Band Air Brakes Corrosive fluid measurement for E&V applications
Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output DESCRIPTION The U86B is a small profile, media compatible, piezoresistive
More informationSSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
More informationPressure Transmitters for Sanitary Applications Model SA-11
Electronic Pressure Measurement Pressure Transmitters for Sanitary Applications Model SA-11 WIKA Data Sheet PE 81.80 Applications Food and beverage industry Pharmaceutical industry Biotechnology industry
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up
More informationPressure transmitters for heavy duty applications Type MBS 3250
Pressure transmitters for heavy duty applications Type MBS 3250 Features Designed for use in harsh industrial environments For medium and ambient temperatures up to 125 C With integrated pulse-snubber.
More informationFeatures. Pressure & temperature combined. Sub miniature and light sensor. Temperature output. Built-in electronic Vdc
Sub-Miniature Pressure and Temperature Transducer Features Pressure & temperature combined Sub miniature and light sensor Temperature output Built-in electronic 0.5-4.5Vdc Applications Automotive - on
More informationPressure transmitter for general applications Model S-10, standard version Model S-11, flush diaphragm
Electronic Pressure Measurement Pressure transmitter for general applications Model, standard version Model S-11, flush diaphragm WIKA Data Sheet PE 81.01 Applications n Mechanical engineering n Hydraulics
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type MH-2 Applications Mobile hydraulic systems Automotive industry Compressor systems Special Features Pressure ranges from 1000 psi to 8000 psi 4-20 ma, 1-5V, 0-10V, 0.5-4.5V
More informationElectronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E.6 2 switching outputs Electronic pressure switches, High-Performance series with two switching outputs Outstanding overpressure protection
More informationOEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationPressure transmitter for marine applications Type MBS 5100 and MBS 5150
Data sheet Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 The ship approved high accuracy block pressure transmitter is designed for use in almost all marine applications. MBS
More informationABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet
Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive
More informationPressure transducer DMU 01K Compact version
Pressure transducer DMU 01K Compact version Dimensions (in mm) Wiring diagram 8 Application Special OEM unit. For electronic pressure measurement in industrial or HVAC applications (such as hydraulic,
More informationSSI Technologies MediaSensor
SSI Technologies MediaSensor P51 Pressure Transducers Product Description SSI s line of bulk micro-machined, absolute and gage pressure transducers and transmitters for both harsh and benign media with
More informationP255 Stainless Steel Pressure Transducer
P255 Stainless Steel Pressure Transducer Description The model P255 is based on Kavlico s fieldproven ceramic capacitive technology with the latest state-of-the-art ASIC. Featuring a 316SS housing, the
More informationLMK 387. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO
LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... mho up to 0... 00 mho Output signal -wire: 4... 0 ma Special
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationAST44LP Intrinsically Safe Low Pressure Transducers / Transmitters
AST44LP Intrinsically Safe Low Transducers / Transmitters Class I Division 1 Groups C, D IS with Approved Barrier OVERVIEW The AST44LP is a stainless steel pressure transducer with a wide variety of options.
More informationDL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless
More informationFeatures. Available with 0,5-4,5Vdc output. Operating from -40 to +140 C. Designed for harsh environment. Large Bandwidth
Miniature Pressure Sensor for Harsh Environment Features Available with 0,5-4,5Vdc output Operating from -40 to +40 C Designed for harsh environment Large Bandwidth Applications Automotive - on vehicule
More informationSpecial Purpose Transmitters
Special Purpose Transmitters Type UT-10/UT-11 UNITRANS Universal Pressure Transmitter User Adjustable Turndown of up to 1:20 Large, Easy-to-Read LCD includes Bar Graph and Trend Display The UniTrans pressure
More informationMBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationPRESSURE TRANSDUCERS. Specifications. Individual Specifications
00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need
More informationPRESSURE BENCH OPERATING INSTRUCTIONS
PRESSURE BENCH OPERATING INSTRUCTIONS Overview: The pressure bench system allows the user to apply a variety of calibrated pressures to a variety of high and low pressure transducers. In addition the system
More informationSATRON VTe pressure transmitter
SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationSSI Technologies Application Note PS-AN7 MediaGauge (Model MG-MD) Digital Pressure Gauge Product Overview
Product Description The MediaGauge MG-MD is a multi-functional digital pressure gauge consisting of a media isolated piezoresistive pressure sensing element, signal conditioning circuitry for temperature
More informationUNIK Pressure Sensing Platform. GE Sensing & Inspection Technologies. Features
GE Sensing & Inspection Technologies UNIK 5000 Pressure Sensing Platform The UNIK 5000 is a high performance configurable solution to pressure measurement. The use of Druck silicon technology and analogue
More informationMarine Pressure ECTN Applications. Features
Marine Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic transmitter is based
More informationSwitch to. Generation NEW Electronic Level. One Series for. Pressure Temperature Level
Switch to Generation 000 NEW Electronic Level One Series for Temperature Level Quality by design Generation 000 BPS000 / BTS000 / BLS000 Wide range of performance Simple configuration allows customers
More informationUltra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26
Electronic Pressure Measurement Ultra High Purity Transducer, Ex na nl Models WU-20, WU-25 and WU-26 WIKA Datasheet WU-2X Applications Gas panels for OEM tools Semiconductor, flat panel display and photovoltaic
More informationPRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER
PRESSURE PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE The PYRP-28 pressure transmitter is suitable for the measurement of pressure, vacuum and absolute pressure of gases, vapours and liquids for industrial
More informationPRESSURE TRANSDUCERS. Specifications. Individual Specifications
GEMS COMPLIANT 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 00 psi to 0-0,000 psi ranges (0- bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For
More informationSelectable ranges and an LCD are a technician s best friend, that s why we make them standard on every dry media differential pressure sensor!
PRESSURE SENSORS PRESSURE PDP3 Series 0-2 32 PDP3 Series 0-10, 0-25 34 PG Gauge Series 36 PW Wet-Wet Series (Cable Version) 38 PW Wet-Wet Series (Conduit Version) 40 PW Series Ordering Guidance 42 Selectable
More informationElectropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN
Electropneumatic Converters i/p Converters Type 6111 Fig. 1 Type 6111 in standard version Fig. Type 6111 mounted on a supply air manifold Fig. 3 Type 6111 in field enclosure Mounting and Operating Instructions
More informationOEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
More informationIndustrial Pressure Transmitter
ECT 0. % (0. %,.0 %) 87 Industrial Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic
More informationInstallation and Operation Instructions DLP Series
Installation and Operation Instructions DLP Series PRECAUTIONS Figure 1: DLP Dimensions and Hardware REMOVE POWER BEFORE WIRING. NEVER CONNECT OR DISCONNECT WIRING WITH THE POWER APPLIED. DO NOT ALLOW
More informationData Sheet P4055 Pressure Transducer
Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series
More informationMillivolt Output Pressure Sensors
Millivolt Output Pressure Sensors Prime Grade Pressure Sensors Features 0 to 0.3 PSI to 0 to 150 PSI Pressure Ranges Highest accuracy version Temperature Compensated Calibrated Zero and Span Applications
More informationJUMO MIDAS S06. OEM-Pressure Transmitter Low Pressure. Applications. Brief description. Customer benefits. Special features
Delivery address: Mackenrodtstraße 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +9 66 600-0 Fax: +9 66 600-607 Harlow, Essex CM 0 DY, UK Phone: + 79 6 55 Fax: + 79 6 50 9 67 Myers Road
More informationRelative and absolute pressure transmitter type 691
Relative and absolute pressure transmitter type 691 Pressure range -1... 0 600 bar Type 691 pressure transmitters have a unique and well proven ceramic technology. Beside a wide range of pressure and electrical
More informationPFT - the Flexible Pressure Transmitter
DaTa S h e e t PFT - the Flexible Pressure Transmitter The PFT is distinguished by its high-quality measurement technology. The device is well suited to solve demanding measurement tasks in industrial
More informationDifferential Pressure Sensors
1 920 1920P01 Differential Pressure Sensors for neutral and mildly corrosive liquids and gases QBE63-DP Differential pressure sensor, suitable for gases and liquids, for the measurement of positive and
More informationSATRON VT Pressure Transmitter
SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More informationJUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.
Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and
More informationMS52XX SMD Pressure Sensor
1, and 12 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Surface mount 7.6 x 7.6 mm Low-noise, high-sensitivity, high-linearity DESCRIPTION The MS52XX SMD pressure
More informationPressure Transmitter for wind turbine applications MBS 8200 and MBS 8250
Data sheet Pressure Transmitter for wind turbine applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationPressure measurement PP20H Fully welded hygienic pressure sensor with flush membrane
Product highlights All market typical hygienic connections available EHEDG & 3-A certified versions available Condensate-proof measuring cell IO-Link available Space-saving installations from DN 25 on
More informationUNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard.
GE Measurement & Control UNIK 5800/5900 Flameproof/Explosion-Proof Pressure Sensing Platform The 5800 and 5900 are compact and rugged versions of the high performance UNIK 5000 pressure sensing platform
More informationEPI Applications. Features
EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
More informationFPT Applications. Features
FPT 85 Flush Membrane Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The Flush Membrane Transmitter
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More information