Installation Instructions CAUTION
|
|
- MargaretMargaret Holmes
- 6 years ago
- Views:
Transcription
1 Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility of misapplication or misadjustment. 7500H eries Multi ize 1 thru 6 Door AA Closers ABO Models 7500H J7500H J7500H P7500H Note: The closing force for series 7500 door closer is adjustable from a size 1 to a size 6, as outlined in ANI tandard A156.. When this series of door closer is installed and adjusted to conform to ADA reduced opening force requirements (5 lbs max.) for interior doors, it may not have adequate closing force to reliably close and latch the door. Power adjustments charted on pages 3, and 5 are recoended where possible, to ensure proper door control. egular Arm Installation Closer mounts on hinge (pull) side of door. ee Page 3. Closer cover not shown eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H Top Jamb Installation Closer mounts on frame face on opposite to hinge (push) side of door. ee Page. Closer cover not shown ight Hand Door H eft Hand everse H Parallel Arm Installation Closer mounts on opposite to hinge (push) side of door. ee Page 5. Closer cover not shown eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H eft Hand Door H ight Hand everse H 1
2 Components: Figure 1 DA Option Closer (5 Valves) Arm shoe Nut Holder oop Forearm crew tandard Closer ( Valves) Closer Assembly Tube Main Arm Connecting od 2 Cover crews 2 Cover crews Power Adjustment Nut Plastic Cover (tandard) Metal Cover (Optional) crew Pack tandard Optional Fasteners elfdrilling crew Throughbolts and groetnuts Door or Frame Wood (see Note) 1/ 20 machine screw Metal leeve nuts and bolts Preparation for Fasteners Figure 2 Aluminum or Metal Hollow Metal Aluminum or Wood All Drillizes No drill required 3/16 (.30 ) Drill: #7 (0.201 dia.) Tap: 1/ 20 9/32 (7 ) through; 3/8 (9.5 ) door face opposite to closer 3/8 (9.5 ) through 9/32 (7 ); 3/8 (9.5 ) dia. x 3/8 (9.5 ) deep on door opposite to closer Note: Wood doors/frames. Pilot hole must be drilled when using elfdrilling crews. Always consult door/frame manufacturer for fastener compatibility with the material of their door/frame. 2
3 Installation Instructions egular Arm Template A 55/8 (13) 13/ (.5) C Hinge or Pivot 3/ (19) Installation equence 23/8 (60.3) (101.6) (171.5) 3/8 (111.1) 123/8 (31.3) elect angle of opening and use dimensions shown in template and chart to locate holes on door for closer body (or holes for optional 7786 backplate) and 2 holes on frame face for arm shoe. For applications that are different from above, a separate template will be supplied for door and frame preparation. Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7786 backplate to door, only if it is required for the door conditions. Install closer body with tube end away from hinge, with valves: Down for eft Hand door UP for ight Hand door. Fasten arm shoe (with Holder Assembly) Figure 1, Page 2 to frame face with hold open nut: UP for ight Hand door Down for eft Hand door 11/8 (29) 3/ (19) 11/2 (38) Arm Mark Do Not cale Drawing ight Hand Door hown Dimensions are in () Backplate Mounting Hole Only To to to to 180 Pinion Flat Dimension A 75/8 65/8 5/8 1/8 Install main arm onto closer pinion shaft, aligning arm mark with the one flat corner of the square shaft Pinion Flat, see illustration below. ecure with hex washerhead main arm screw Open door slightly to slide connecting rod into holder loop unit. Close door and rotate arm away from hinge until connecting rod and holder loop unit are perpendicular (at a 90 angle) to door. Tighten forearm screw. Nut UP ight Hand Door eft Hand Door Nut DOWN Make closer adjustments, if required, using information below and on Page 6, then install closer cover. Power Adjustment Chart Interior Exterior / () / () 32 / (813) 36 / (91) 52 / (1321) 60 / (152) 28 / (711) 3 / (86) 38 / (965) 8 / (1219) Turns from ero NOTE: of 161/2 turns (360 ) of Power Adjustment Nut. 5 81/ /2 161/2 with the proper preload spring is not preloaded. To increase power, use 11/16" "pring Power Adjustment Nut" + 3
4 Installation Instructions A 23/8 (60.3) (101.6) (171.5) 3/8 (111.1) Top Jamb Template 123/8 (31.3) 3/ (19) Do Not cale Drawing eft Hand Door hown Dimensions are in (). * 3/8 (10) C Hinge or Pivot Installation equence 55/8 (13) elect angle of opening and use dimensions shown in template and chart to locate holes on frame for closer body (or holes for optional 7786 backplate) and 2 holes on door for arm shoe. For applications that are different from above, a separate template will be supplied for door and frame preparation. Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7786 backplate to frame, only if it is required for the frame conditions. Install closer body with tube end away from hinge, with valves: Up for eft Hand door Down for ight Hand door. 13/ (.5) *15/8 (1) * 11/8 (29) * Always use frame or transom rabbet as reference plane, not bottom of stop. eft Hand Door Arm Mark 7786 Backplate Mounting Hole Only To to to to 180 Door wing Pinion Flat Dimension A 75/8 65/8 5/8 1/8 ight Hand Door Open door slightly to slide connecting rod into holder loop unit. Close door and rotate arm away from hinge until connecting rod and holder loop unit are perpendicular (at a 90 angle) to door. Tighten set screw. Door wing Fasten arm shoe (with holder loop) Figure 1, Page 2 to door face with hold open nut: Down for ight Hand door Up for eft Hand door Note that a longer connecting rod or different arm might be required for your frame conditions, see illustration with eveal ange chart to the right. Install main arm onto closer pinion shaft, aligning arm mark with the one flat corner of the square shaft, Pinion Flat, see illustration at right. ecure with hex washerhead main arm screw. Valves Up Valves Down eveal ange Under 3 Door swing (76) H Arm Preload 3 to 1/ Arm Preload 180 J7500H 77013A A 150 Nut UP 180 J7500H 77013B B Nut DOWN (76 to 108) 1/ TO 67/8 (108 TO 175 ) 1/ to 67/8 (108 to 175 ) Make closer adjustments, if required, using information below and on Page 6, then install closer cover. Model Complete Arm Adjusting od Power Adjustment Chart Interior Exterior / () / () 32 / (813) 36 / (91) 52 / (1321) 60 / (152) 28 / (711) 3 / (86) 38 / (965) 8 / (1219) Turns from ero NOTE: of 161/2 turns (360 ) of Power Adjustment Nut. 5 81/ /2 161/2 with the proper preload spring is not preloaded. To increase power, use 11/16" "pring Power Adjustment Nut" +
5 Installation Instructions Parallel Arm Template ½ (13) C Hinge or Pivot B 27/8 (73) 3/8 (10) (101.6) 1/ (6) 2 (50.8) 23/ (69.9) 123/ (323.9) 3/ (120.7) 5/16 (7.9) 11/2 (8) To to to to 180 Dimension A 83/ 71/ 61/ 51/ Do Not cale Drawing eft Hand Door hown Dimensions are in (). Dimension B 91/ 73/ 53/ /8 (60.3) 7788 Dropplate Mounting Hole Only A (171.5) Installation equence elect angle of opening and use dimensions shown in template and chart to locate holes on door for closer body (or holes for optional 7788 dropplate) and holes on underside of frame for soffit plate. For applications that are different from above, a separate template will be supplied for door and frame preparation. Prepare door and frame for fasteners using "Preparation for Fasteners" chart, Figure 2, Page 2. Fasten optional 7788 dropplate to door, only if it is required for the door conditions. Install closer body with tube end away from hinge, with valves: Down for eft Hand door UP for ight Hand door. Fasten soffit plate to frame. Install arm shoe (with holder loop)onto soffit plate with hold open nut: UP for ight Hand door Down for eft Hand door ecure with screw assembly from screw pack. Install main arm onto closer pinion shaft using information below and above right illustration. The one flat corner of the square shaft Pinion Flat, must be aligned with the corner mark on arm: Arm mark for ight Hand door Arm mark for eft Hand door This requires that the pinion shaft be rotated approximately 50 degrees to get correct alignment. ecure with hex washerhead main arm screw. eft Hand Valves Down eft Hand Door 2 Typ. Arm Preload Pinion Flat Arm Mark Open door slightly to slide connecting rod into holder loop unit. Close door and pull arm away from door face so elbow is 11/2 (38) off of door face. Tighten set screw in holder loop. Door wing 11/2 (38) ight Hand Door Valves Up Nut Nut DOWN UP Make closer adjustments, if required, using information below and on Page 6, then install closer cover. ight Hand Power Adjustment Chart Interior Exterior / () / () 30 / (762) 3 / (86) 38 / (965) 8 / (1219) 5 / (1372) 26 / (660) 30 / (762) 36 / (91) 8 / (1219) Turns from ero NOTE: of 161/2 turns (360 ) of Power Adjustment Nut /2 11/2 161/2 with the proper preload spring is not preloaded. To increase power, use 11/16" 5 "pring Power Adjustment Nut" +
6 Unit Adjustment Closing Power Control Figure 3 Closing peed Controls Figure atch 10 Closed w eep a tandard Closing Cycle Closing peed Controls n et closer to desired size. For recoended sizes, refer to the Power Adjustment Chart on pages 3,,& 5. with the proper preload spring is not preloaded. + To increase power, use 11/16" ge A DO NOT use a power drill or driver to turn adjustment nut. This will damage closer and void warranty. Delayed Action Closing Cycle Adjust Closing peed Time to between 3 to 7 seconds from 90. Use of the door by handicapped, elderly or small children may require greater closing time. atch 10 Closed weep 70 Delay ange B Figure 5 Door Control (Figure 6.) Backcheck ("B") valve controls the hydraulic resistance to door opening. NEVE close this valve completely it is not to provide a positive stop. Backcheck position ("P") valve controls the door angle where backcheck cushioning starts. Valve normally closed. Door Controls Figure 6 Backcheck Figure 7 Backcheck Position 1/8" Hex Key Open for backcheck later in dooropening cycle. Do not force valves counterclockwise out of closer body or a fluid leak will occur. Identify Door Closer Backcheck "P" (Normally Closed) tandard 7500 = valves (/D,, P&B) Delayed Action 7500DA = 5 valves (/D,,, P&B) Cycle Backcheck Cushion Increase "B" (NEVE Close Completely) 1/8" Hex Key Decrease tandard Closer Do not force valves counterclockwise out of closer body or a fluid leak will occur. "" (atch) "/D (weep) low 1/8" Hex Key Fast Delayed Action Closer All Valves "" (atch) "" (weep) "/D" (Delayed Action) 6 Older models may be stamped "16", 1 or 26. They can be replaced with the newer 16 model which has no stamp Highway 7 East Monroe, NC Tel: (877) Fax: (800)
Installation Instructions (07-08) CAUTION
Hinge Edge of Hinge Edge of 7500 eries Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should
More informationInstallation Instructions
eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H ight Hand Door H eft Hand everse H egular rm ee Page Top Jamb ee Page 5 Parallel rm ee Pages & Instructions CUTION n Incorrectly installed
More informationSeries 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications
Series 940 J940 ASSA JL940 ABLOY Installation Instructions Multi-Sized to 6 Non-Hold Open Regular Arm Applications Left Hand Regular Arm Application Contents Page Template Template with 984-8 Drop Plate
More information8000 Series Tri-Style Non Handed Door Closer
8000 eries Trityle Non Handed Do Closer eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H egular rm ee Page ee Page 5 Parallel rm ee Pages 3 & 4 Instructions
More informationSeries. Non Hold Open Door Closers Parallel Arm. * conditions permitting. Parts. Mark and Drill Holes. Installation Sequence.
Instructions CUTION n Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions should be followed to avoid the possibility of misapplication
More information3010 Series. 4 Latch. Hold Open Arm Door Closers Regular Arm. Installation Sequence. Mark and Drill Holes. Parts. Sweep. Set Hold Open.
000 eries Tri-Packed Non Handed Closer Instructions eft Hand - H ight Hand everse - H eft Hand - H ight Hand everse - H egular rm ee Page ee Page 5 eft Hand - H ight Hand everse - H Parallel rm ee Pages
More informationInstallation Instructions. Non Hold Open Models. Sized (Sizes 2,3,4,5) Weaker BC 9303BC 9304BC 9305BC. Stronger +
O Right Hand RH eft Hand Reverse HR eft Hand H Right Hand Reverse RHR eft Hand H Right Hand Reverse RHR Regular rm ee Page Top Jamb ee Page Parallel rm ee Pages 3 & UTION Instructions Non Hold Open Models
More informationSARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH FOLLOWING ARM SETS: JH, JHZ and JPH9 Strength Adjustment From Size 1 Through 6.
GENT 1331 DOO COE INTTION INTUCTION WITH FOOWING M ET: JH, JH and JPH9 trength djustment From ize 1 Through 6. CUTION: FIUE TO INT O DJUT POPEY MY EUT IN INJUY O DMGE FO ITNCE, C GENT T 1800775477 or www.argentlock.com
More informationTri-Style 1600 Series Non Handed Door Closer
CAUTION Trityle 100 eries Non Handed Do Closer CAUTION 809312502020 (1202) An Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions
More informationTri-Style 1600H Series Non Handed Door Closer
OY Non Handed loser egular rm ee Page eft Hand H ight Hand everse H eft Hand H ight Hand everse H eft Hand H ight Hand everse H ee Page 5 Parallel rm ee Pages & 4 UTION Instructions Trityle 100H eries
More informationDC3210 Series. Multi-Sized 1 thru 6 DEEP REVEAL APPLICATION WITH M103 OPTION(615F59 CLAMP KIT) Recommended Closer Size
DC310 Series Multi-Sized 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH DEEP REVEAL APPLICATION WITH M103
More informationASSA ABLOY Universal Door Closers
Installation Instructions For Non-Hold Open or A Hold Open Arm Options DC6200 Series DC6400 Series Multi-Sized thru 6 Half-Size thru 6 Regular Arm Parallel Arm Universal Door Closers Jamb Mount See pages
More informationInstallation Instructions Series 78-B/FHA Hold Open
Installation Instructions Series 78-B/FHA Hold Open Traditional Style Door Closers Read these instructions before proceeding with the installation. Make sure that the door opens the full angle desired
More informationASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms
DC610 Series Multi-Sized 1 thru 6 DC610 Series Half-Size 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH
More informationHinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430
Installation Instructions Universal Door Closers Slide Track Application (0 Maximum Door Swing) (standard)- N.H.O. Bumper Stop A - H.O. Bumper Stop Track - Pull Side See pages 2 & Hinge (Pull) Side Door
More informationASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device
Overhead Concealed Closer Holder Releasing Device with Rigid Slide Arm For wood or metal doors 1-3/4 to 2-1/4" (45-57mm) thick Hung in a hollow metal frame Standard butt hinges Typical Installation One
More informationRequirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING
CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions
More informationASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY
0 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) / Replacement Motor Key (00KEY) Rod
More informationThese door closers should NOT be installed on the exposed side (weather side) of exterior doors.
500 Series Non-Hold Open Door Closer Instructions vailable in Sizes,, and 5 Regular rm See Page n incorrectly installed or improperly adjusted door closer can cause property damage or personal injury.
More informationRequirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING
CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO
More informationASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual
Pull Side Applications with Slide Track (7210, 7250) (see page 7 for template) 7200 Series Multi-Point Hold Open Installation and Instruction Manual 3 1 Push Side Applications with Double Lever Arms (7220,
More informationMOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED
HINGE (PULL) SIDE MOUNT LCN 4010 SERIES The 4010 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Ten Million
More informationMulti-feature closers with compact design, ideal for application on interior doors DOOR CLOSER CATALOG
Multi-feature closers with compact design, ideal for application on interior doors 1700BC E R I E DOOR CLOER CATALOG 1700BC ERIE LIGHT COMMERCIAL DOOR CLOER INTRODUCTION Norton 1700BC eries Door Closers
More informationCloser with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG
Closer with traditional styling for low to moderate traffic openings 78-B/F S E R I E S DOOR CLOSER CATALOG Introduction The 78-B/F Series is a surface closer with traditional styling that offers multiple
More informationROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information
ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer
More informationPower drill Center punch Wire stripper
Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 7 for template) 7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 3 1 Push Side Applications with Double Lever
More information8000 SERIES Architectural Door Closer
Architectural Door Closer overview The 8000 eries Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve
More informationTS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)
TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer
More informationPULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T*
4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on
More information9000 Series Trinity The world's most intelligent door closer
9000 Series Trinity The world's most intelligent door closer INTRODUCTION Designed for doors that are subject to changing conditions, the Norton 9000 Series Trinity offers customers an intelligent door
More information5700 Series Power Operator Stop (Push) Side Mount Installation and Instruction
5700 Series Power Operator Stop (Push) Side Mount ASSAManual ABLOY Installation and Instruction 80-957-0005-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 5 6 0 8 7 9 -/8 () Item No. Description Back plate Door
More informationTS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH)
Surface applied door closer Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) TABLE OF CONTENTS Technical specifications Size selection chart 2 Closer setup
More informationHIGH SECURITY CLOSERS SERIES
HIGH SECURITY CLOSERS SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide
More information51 Series Door Closers. An ASSA ABLOY Group brand
51 Series Door Closers An ASSA ABLOY Group brand Introduction contents Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11
More informationHIGH SECURITY SERIES
HIGH SECURITY SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide is based
More information5300 Series 5300 SERIES
5300 Series Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control.
More information78-B/F Series. Traditional Door Closers
78-B/F Series Traditional Door Closers introduction The Norton Series 78-B/F Traditional Surface Closers represent a combination of traditional styling and modern closer features. All closer sizes are
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN 4040 SERIES The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged
More information*4110 HCUSH mount shown
*PARALLEL ARM (PUSH SIDE) MOUNT The 4110 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Standard 4110 series
More information51 Series Door Closers. An ASSA ABLOY Group brand
51 Series Door Closers An ASSA ABLOY Group brand Introduction CONTENTS Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFACE MOUNTED CLOSERS PRODUCT SELECTION GUIDE Surface mounted 1000 Series LCN closers feature a modern slim line design for easy installation on narrow head frames and top rails. This guide
More informationHigh Security Closers Series
High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can
More information9540 SERIES. Cast Iron Door Closer
Cast Iron Door Closer Introduction The Norton 9540 s provide an ideal retrofit solution for retail, office, government and other commercial facilities. Certified to ANSI/BHMA Grade 1 requirements for long
More informationDoor Controls DOOR CLOSERS
Door Controls Hager door closers offer architects, contractors, and building owners a superior product with proven reliability. In fact, our 5100, 5200, and 5300 Series Grade 1 models are the only closers
More informationConcealed overhead closer for high-end applications DOOR CLOSERS CATALOG
Concealed overhead closer for high-end applications 7900 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 7900 Series Overhead Concealed Closers offer extremely durable operation with the vandal resistance
More informationPUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM
4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on
More informationD-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.
D-1610/D-1611 SERIES: DOOR CLOSERS D-1610/D-1611 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 Standard Application...4 Parallel
More informationU1500. Surface Applied Door Closers
U1500 Surface Applied Door Closers U1500 SURFACE APPLIED DOOR CLOSERS U1500 SERIES SURFACE CLOSERS CONTENTS U1500 Surface Applied Door Closers Technical Details/Specifications 3 Features 3 Ordering Guide
More informationASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY
00 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) Track Assembly (0-) / Replacement
More informationTS93 EMF T/PT/TDE. Surface applied door closer
TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress
More information4040XP Series Door controls
4040XP Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XP Series is a non-handed
More informationHigh Security Closers Series
High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can
More information1600 SERIES ALUMINUM STOREFRONT DOOR CLOSERS
INTRODUCTION The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1 closers are designed for exterior
More informationDOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM
SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of the closer.
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PULL SIDE) STOP FACE (PUSH SIDE) The 4040T SMOOTHEE is LCN s most flexible heavy duty track closer designed specifically for interior doors in institutional and
More informationD O O R C L O S E R S
DOOR CLOSERS DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the finest ADVANTAGE surface mounting door closers certified by BHMA including: Multi-size door closer: 9000, 8000, 6000, 6000S
More information*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB**
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding
More information7570 SERIES Security Door Closer
7570 SERIES Security Door Closer INTRODUCTION Norton High Security Closers are designed for use in prisons, government buildings, schools, financial institutions, or any installation where vandalism, abuse,
More informationD o o r C l o s e r s
Door Closers DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the fi nest ADVANTAGE surface mounting door closers for your various application demands. There are Multi-size door closer: 9000,
More information4000 Series mounted closers
4000 mounted closers APPLICATIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Adapter plates and other installation accessories available
More information4840 with EDA arm and 459 Door Loop
PARALLEL ARM (PUSH SIDE) MOUNTING The 4840 AUTO EQUALIZER is LCN s pneumatically powered MULTI- DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the
More information5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY
5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 80-957-000-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 6 5 0 8 7 9 Item No. Description Back plate Door Closer
More informationFinishes/Colors/ Powder Coat
Features The 4030 is a cast iron, universal closer designed specifically for doors in moderate traffic conditions. This versatile closer compliments the rest of the heavy duty 4000 and offers the choice
More informationNorton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case
ABS-AMERICAN BUILDING SUPPLY, INC. 1601 Series Multi-Sized Closers - Packed 6 per case Features Two Power Ranges: Each series can be adjusted through a range of sizes: Series 1601 Normal Power Range Closers,sizes
More informationLCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE)
CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged high traffic
More informationCONCEALED CLOSER SERIES
CLOSER SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of
More information*HINGE (pull) side mount shown
CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional
More informationThe 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.
Features The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Certifications Body Construction Fluid Handing Grade 1
More informationLCN 4010T SERIES HINGE (PULL) SIDE
HINGE (PULL) SIDE MOUNT The 4010T SMOOTHEE is LCN s best performing heavy duty track closer designed specifically for interior doors in institutional and other rugged high traffic applications. FEATURES
More informationD-3550 / D-3551 SERIES: DOOR CLOSERS. D-3550 / D-3551 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.
D-3550 / D-3551 SERIES: DOOR CLOSERS D-3550 / D-3551 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 How To Order...3 Standard Application...4
More informationCONCEALED CLOSER SERIES
CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n
More information1461 Series Door controls
1461 Series Door controls Fire Rated: Tested on fire door assemblies in accordance with ustralian Standards, refer fire door manufacturer for specific approval details The LCN 1461 Series is a non-handed
More informationFully adjustable door closer for aluminum storefronts and other medium traffic applications DOOR CLOSERS CATALOG
Fully adjustable door closer for aluminum storefronts and other medium traffic applications 1600 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 1600 Series door closers offer proven quality, performance
More information7100SZ Series SafeZone Installation and Instruction Manual
7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 80-9371-0081-00 (10-10) Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 5 for template) 3 1 Push Side Applications
More informationAn ASSA ABLOY Group brand. 400/4400 Series. Institutional Door Closer
An ASSA ABLOY Group brand 400/4400 Series Institutional Door Closer the engineer s choice Yale s 400/4400 Series Institutional Door Closers offer customers the ideal combination of superior performance,
More informationDoor Closer Cycle. How to Select the Proper Closer. Things to Consider
Door Control Closer Spring Adjustment Not Shown in Door Closer Cycle Diagram Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount
More informationSince 1880 The American Original Architectural Series Door Closers
Since 1880 The American Original 8000 Architectural Series Door Closers 8000 Series Door Closers OVERVIEW Standard on all 8000 Series Closers ANSI A156.4, Grade 1 10-year warranty Non-handed UL10C Staked
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-334-5625 2 Table of Contents Pages 3-5...1000 Series-Surface Mounted Pages 6-7...2030 & 3130 Series - Concealed Pages 8-15...4000 Series - Heavy-Duty Surface Mounted
More information5200 Series
5200 Series 5200 Series Closers are engineered and designed to offer the ideal combination of appearance and reliability. The 5200 Series Closers are constructed of aluminum alloy to be installed on exterior
More information7500/7700 Series. Institutional Door Closers
7500/7700 Series Institutional Door Closers OVERVIEW Features Non-handed Rack-and-pinion design Cast aluminum body 2-3/16" (56mm) projection 1-1/2" (38mm) diameter piston 5/8" (16mm) diameter pinion journals
More informationMulti-sized cast iron closer for high use applications DOOR CLOSER CATALOG
Multi-sized cast iron closer for high use applications 9500 S E R I E S DOOR CLOSER CATALOG INTRODUCTION Ideal for high use openings, the Norton 9500 Series Cast Iron door closer offers the durability,
More informationLCN Super Smoothie Adjustable Closer Super Smoothie Adjustable Closer
4041 Super Smoothie Adjustable Closer Parallel Arm Mount Shown 4041 Super Smoothie Adjustable Closer The 4041 SUPER SMOOTHIE is a heavy duty, double lever arm closer for institutional and other high traffic
More informationGeneral Information 351 Series Powerglide
General Information Closer Spring Adjustment (not shown) Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount of force with which
More information5600 Series Power Operator Installation and Instruction Manual
5600 Series Power Operator Installation and Instruction Manual 80-956-000-00 (08-) 5 ASSA ABLOY 6 Item No. Description Motor (5600M) Cover (5600COV) Control Inverter (5600IN) Power Supply VDC (5600PS)
More information1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer
Medium duty cast aluminum door closer LCN quality and value, backed by a 25-year warranty. The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance
More informationProduct Catalog Phone: Fax:
Product Catalog Phone: 800-321-9602 Fax: 800-328-6070 LCN 2 Table of Contents and Finish Information Pages 3-5...1000 Series-Surface Mounted Pages 6-7...2030 & 3130 Series - Concealed Pages 8-14...4000
More information*24828* 1 Installation. Left Hand Shown, Right Hand Opposite. Customer Service
*24828* 4820 24828 Non-Handed/Non-Sized Auto-Equalizer Low Energy Door Operator, Installation and Adjustment of Door Operator Installation Instructions Long Cover Cover Insert Cover Left Hand Door Right
More information1000 Series surface mounted closers
1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.
More informationD-4550 / D-4551 SERIES STANLEY DOOR CLOSERS
D-4550 / D-4551 SERIES STANLEY CLOSERS GENERAL INFORMATION TABLE OF CONTENTS D-4550 / D-4551 Series Page General Information...2, 3 Standard Application...4 Parallel Arm Application...5 Top Jamb Application...6
More information5300 Series. Architectural Commercial Door Control
5300 Series Architectural Commercial Door Control 5300 SERIES Architectural Commercial Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection American Eagle 5300
More informationstanley door closers d-4550/d-4551 D-4550 / D-4551 SERIES DOOR CLOSERS
stanley door closers d-4550/d-4551 D-4550 / D-4551 SERIES DOOR CLOSERS 1 General InForMatIon table of contents Page General Information... 2 4 How To Order...4 Standard (Pull) Application...5 Parallel
More informationStandard closer offers 3 installation options. - Regular (Pull side) - Top Jamb (Push side) - Parallel Arm (Push side)
The LCN is a non-handed surface mounted closer designed for maximum versatility. wide choice of options, mounting accessories and ease of installation make this a fully universal closer. The LCN has been
More informationCopyright , 2018 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express
over he ad conce aled closer s o v e r h e a d c o n c e a l e d c l o s e r s i n t r o d u c t i o n i n t r o d u c t i o n Rixson Overhead Concealed closers offer an aesthetically appealing way to
More informationDC3000 Series. Door Closers
Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful
More information7500/7700 SERIES INSTITUTIONAL DOOR CLOSER
Page Revised Electronically 5/13 OVERVIEW Cutaway View Optional Delayed Action Valving Optional: DA Delayed Action Closing Sweep Speed Latch Speed S D S L Backcheck Cushioning Backcheck Positioning Sweep
More information4040XPT Series Door controls
4040XPT Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XPT Series is a non-handed,
More informationSurface Applied Door Closers
7300 Equia nestotatus enis 015 Surface Applied Door s Lecest Suntur Orem fuga Equia nestotatus Disciisi nisquissus Nequisi Voloreptatae Consecumque soloribus Iminveria volorum dormakaba 7300 surface applied
More information7500/7700 SERIES. Institutional Door Closer
Institutional Door Closer Page Revised Electronically 5/13, 10/13 7500/7700 SERIES overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality.
More informationD-3550 / D-3551 SERIES STANLEY DOOR CLOSERS
D-3550 / D-3551 SERIES STANLEY CLOSERS GENERAL INFORMATION TABLE OF CONTENTS D-3550 / D-3551 Series Page General Information...2, 3 How To Order...3 Standard Application...4 Parallel Arm Application...5
More information2300 OPERATING/APPLICATION/INSTALLATION INSTRUCTIONS
2300 OPERATING/APPLICATION/INSTALLATION INSTRUCTIONS GENERAL The POWER ACCESS Model 2300 is an automatic door opener designed for opening and closing side hinged residential doors - both exterior and interior.
More information