INDEX. Testers, Tools & Installation Equipment CABLE TESTERS AND TONE PROBES VISUAL FAULT LOCATOR MODULAR CRIMP TOOLS

Transcription

1 INDEX D1 D2 D3 D4 D5 D6 CABLE TESTERS AND TONE PROBES VISUAL FAULT LOCATOR MODULAR CRIMP TOOLS PUNCHDOWN IMPACT TOOLS AND BLADES CABLE STRIPPERS AND CUTTERS FIBER BLOWING MACHINE ALUMINUM SPLIT COUPLERS DITA ( DUCT INTEGRITY TEST APPARATUS)

2 Testers Cable Testers and Tone Probes Tester for Twisted Pair, Coaxial Cable, Telephone The device for testing of twisted pair, telephone, USB and coaxial cable It is used to test lines with RJ-45, RJ-11, USB, BNC modular plugs It consists of an active and a passive parts The device has an integrated BNC terminator 25/50 Ohm, direct/cross connection indicator, battery charge indicator The length of the cable tested is ' (90 m) max Set Tester NETX Leatherette hood 14TCT-240 Twisted pair and coax cable tester Tone Generator and Test Probe The device is used to trace the necessary pair in a cable bunch or in enclosed electrical wiring. Principle of operation: the impulse generator is connected to one end of the required cable. The receiver beeps when approaching the other end of the cable or the cable location in the wall. Set The tone generator with RJ-12(6P4C) modular plugs and alligator clips The tone generator with sound signal and indicator lamp to trace the cable with a signal Protective hood 14TCT-240 Twisted pair and coax cable tester Visual Fault locator Dimensions Ø 13.5x174 mm (0.53x6.85") Output Mode: CW and 3 Hz pulsed signal Range: visibility to 3 km (1.86 mi) Power source: 2xAAA 1.5 V Alkaline batteries Operation Temperature: 0-50 C ( F) Storage Temperature: 0-70 C ( F) Connector Style: all connectors with Ø 2.5 mm (0.1") ferrule 14VFL-9T Visual Fiber Optic Fault Locator, single/multi mode D-1

3 Tools Modular Crimp Tools RJ45/RJ12/RJ11 Ratchet Crimp Tool Full cycle ratchet action Crimps RJ11 6P4C, RJ12 6P6C and RJ45 plugs Integral cutter and stripper 14RJ-8C-6C-RCH RJ11/RJ12/RJ45 heavy duty ratchet strip/crimp Rj45 Crimp Tool 14RJ-8C Rj45 crimp tool Rj45 Crimp Tool The 14RG-330A is a heavy-duty ratchet action hex crimper for RG58 and RG59 cable. Can be used for most crimp style BNCs, F-type connectors, TNCs, and more. Heavy-duty ratchet style body Removable/replaceable die.068" /.213" /.256" (1.72 / 5.42 / 6.50 mm) die Bubble pack 14RG-330A Rj45 crimp tool D-2

4 Tools Punchdown Impact Tools and Blades Punch down Tool and Blades For seating wire into terminal block or cut of wire end after terminated. HT-3640R series is with impact & adjustable Hi-Lo pressure selector. A built-in combination hook/ spludger for tracing and removing wires. TPR soft-grip handle provides better comfort. Twist-lock style holder provides quick, easy blade changes and prevents pullout. An additional safe storage for one more spare blade. Interchangeable and reversible blades. Handle 14TP -3640R (twist-lock type) Blade 14TP -14T 14TP-14TA 14TP -14TB 14TP -14TBK 14TP-14TK 14TP -14TW 14TP -14TQ 14TP -14TPY For terminal block Use on 66type Use on 66 & 110/88 type Use on 110/88 type Use on Krone type Use on Krone type(w/scissor) Use on Bix type Use on Quante type Use on Pouyet type Punch down blades - type 110/66/88 Krone type Krone type, with cutter Other economy models are available. 110 type Multi-Pair Termination Tool For use on Lan and Telecom, seating 4 or 5 pairs UTP(24AWG)at a time. Suitable for both 110 type cable side and cross-connect side terminals blocks. The termination block heel w/blades are changeable and reversible. One end for seating and cutting off wires, and the other end for seating wires only. Frame 14TP -3150R Blade 14TP -15B 14TP 15BK 14TP -15C 14TP -15D For terminal block Use on 110 type(4 pairs) Use on Krone type(4 pairs) Use on modular jack(4 pairs) Use on 110 type (5 pairs) Termination heads 4 pairs 5 pairs D-3

5 Tools Cable Strippers and Cutters UTP/STP Cable Strippers and Cutters For stripping wire diameter Ø 5 - Ø6.2mm. Top end for 110/88 type insertion use. 14TSP-T1 14TSP-T1 UTP/STP cable stripper and cutter UTP/STP cable stripper and cutter Fiber optic strippers 14TFP-F1 Fiber Optic Stripper and Cutter, Ø 125/250 mm (4.9/9.8") Adjustable Coaxial Wire Strippers These rotary action coaxial wire strippers feature adjustable blade positions and blade depths to accommodate a variety of cable styles and connector types. Set up separate strippers for each type of cable and connector you use. can be used with crimp or compression connectors produces quick and consistent strips use for BNC, F-type, RCA, SMA, TNC, etc. 14TCP-C132 14TCP-C133 Adjustable coax cable stripper, 3 blade for RG58, RG59, RG62, RG6 Adjustable coax cable stripper, 2 blade for RG58, RG59, RG62, RG6 D-4

6 Installation Equipment FIBER BLOWING MACHINE Netx Presenting a wide series of High-Performance Optical Fiber Cable Blowing Equipment and accessories Such as OFC Blowing Machine, Optical Fiber Cable Blowing Machine, Fiber Optic Cable Blowing Machine, OFC Blowing, Cable Blowing, Cable U Seal, Pushfit couplers, Aluminum Split couplers, Y Couplers, PLB Ducts, END Caps and more. Features Machine weighs only 35 kgs, it is very easy to shift from one work point to other point easily Since operation of equipment controls only two levers, no dedicated operator required Semi skilled person can learn and operate the machine No cumbersome connections and power pack, fuel arrangements required. Predetermined cable rollers to fit cable diameter ensures no damage to the cable at an abnormal blowing conditions or sudden block of cable. Technical Information The Equipment is made up of all aluminium alloy metal. High torque high R P M pneumatic power drive system fitted to run the cable push rollers. Pneumatic power drive system consumes air 4 cfm at 7.5 Kg bar pressure. Equipment weighs 36 Kgs and physical die mentions : Length : 750 mm, Width : 400 mm and height : 400 mm. Separate FRLS attachment provided with stand to feed moist free, lubricated air to pneumatic power drive system. The equipment can blow O F Cable at an velocity 90 meters per minute at normal & good ducting conditions. Machine can blow O f Cable of size 10 mm dia to20 mm dia of any configuration armoured or unarmoured. TOP SIDE CABLE DRIVE UNIT AIR CHAMBER TOP CABLE DRIVE SLOT BOTTOM CABLE DRIVE UNIT AIR MOTOR AIR CHAMBER BOTTOM DUCT CLAMPING CLAW CABLE DRIVE CLAMPING STUDS ALLUMINIUM STAND AIR CHAMBER CLAMPING STUDS DUCT PRESSURE GUAGE D-5

7 Installation Equipment Main Air hose from compressor Outlet to air filter Air pressure adjusting knob Tune clock wise for 6kg bar pressure Air motor Cable blowing machine front view In let to air motor Fix 1/4 ball valve here with suitable adapter and QRC Moisture remover Air filter Aluminum split couplers The Aluminum Split Couplers used with Optical Fibre blowing operations to connect the underground laid OFC duct to couple with cable blowing machine at ground level or at convenient locations,or at when the regular coupling joints may burst during the course of blowing, These are made of high grade aluminum alloy and can withstand fungus attacks and corrosion free, its typical design. Very simple to fix and remove at trench depths or man holes and does not require any special tool. Comes in size 40 mm X 40 mm, 50mmX50mm, 32mmX32mm also 40mmX32mm, 40mmX50mm, 50mmX32mm. DITA ( Duct Integrity Test Apparatus) Duct Integrity Test apparatus can be conveniently used for testing of various parameters like duct alignment, air tightness test, shuttle test and also useful for cleaning before installations of O F C in Plb/ silicore ducts of various diameter 32mm,40mm and 50mm with safer environment. Can Blow rope inside the duct to enable manual pulling of OFC for shorter distance and emergencies. (Available On Demand) 14TL1426 OFC Blowing Machine (32mm, 40mm and 50mm) D-6