Universal Wireless Dashboard Y-Dash + Android App Y-Dash GT. User Manual Firmware version 1.6 Software version 2.28 Hardware version 1.

Size: px
Start display at page:

Download "Universal Wireless Dashboard Y-Dash + Android App Y-Dash GT. User Manual Firmware version 1.6 Software version 2.28 Hardware version 1."

Transcription

1 Universal Wireless Dashboard + Android App GT User Manual Firmware version 1.6 Software version 2.28 Hardware version 1.3

2 Page 2 is an electronic microprocessor based device that collects analog and digital signals, and turns them into a stream of data using Bluetooth. This allows the receiving device to display data without cables and with maximum electrical insulation. The electronics is made of high quality automotive grade components to provide high reliability in any situation. The application for Android (TM) GT receives the data stream from, and displays it on the screen in a "virtual dashboard". Warning: Product not intended to be used on public roads. For the correct operation of, it is mandatory to use 5kohm resistive spark plug caps. is not intended to be installed in parallel to the stock dashboard Main Features: High speed Bluetooth Streaming Rich set of settings to fit any need Customizable Bluetooth pin Bluetooth v2.0 class 2 connectivity designed for Android(TM) min. version SMT construction Streaming protocol designed for enhanced noise immunity hard reset function Chance of using GPS for speed display extremely compact design : 35mm x 58mm x 16mm

3 Page 3 Wiring The color of the wires identify their usage. Table 1 shows the wires colors and the matching channel. The links shown are specific for the use of the Android application Y- Dash GT. Other applications may exploit the channels for different uses. COLOR REF CHANNEL YELLOW Y +12v BLACK Bl GROUND RED R IGNITION COIL SIGNAL BLUE Blue SPEED SENSOR PURPLE Pu ENGINE TEMP WHITE W FUEL LEVEL PINK P HIGH BEAM LAMP BROWN B TURN SIGNAL LEFT GRAY G TURN SIGNAL RIGHT ORANGE O OIL PRESSURE SWITCH GREEN Gr NEUTRAL SWITCH Table 1 If the vehicle is originally equipped with a dashboard, most of the necessary cables will be available by disconnecting its connector. It' s advisable in this case to find a connector equal to the stock one to make the connections, so as to make the installation reversible. Before powering for the first time, ensure that the cables of the fuel level and engine temperature are not live. To do this test, turn the key to "ON" position and with a tester, measure the voltage of these cables to ground. The measure must be 0. If voltage is present, you must disconnect the power from the sensor, as shown in diagram 1. To connect to a thermistor type fuel level sensor, you must use the FTD module, available separately. If the vehicle is not equipped with a dashboard, or some cables are not present in the stock connector, proceed connection directly on the cables of the electrical system or sensors according to the scheme 1. The abbreviation color is indicated in Table 1, Table 2 shows the components of the system. For measuring speed and distance, you can choose from one of the two configurations shown in the diagram, or take advantage of the Android device's GPS. If you choose this last option, the odometer will be increased only when the device is connected. If you do not intend to use all sampling channels, leave the wires disconnected isolating them thoroughly. Not all of the stock speed sensors are compatible with. If the speed is not detected, use the dedicated sensor, available separately.

4 Page 4

5 Page 5 REFERENCE DESCRIPTION 1 HIGH BEAM LAMP 2 TURN SIGNAL LAMP RIGHT 3 TURN SIGNAL LAMP LEFT 4 KEY SWITCH 5 NEUTRAL SWITCH 6 OIL PRESSURE SWITCH 7 IGNITION COIL 8 FUEL LEVEL SENSOR 9 ENGINE TEMPERATURE SENSOR 10 HALL EFFECT SPEED SENSOR (OPTIONAL) 11 REED SPEED SENSOR (OPTIONAL) Table 2 Usage of Android app GT First connection When started, GT shows the "dashboard" screen. To connect to the unit, tap the connect icon. If this is the first connection, the application will open a dialog box with a list of in-range devices. Select and wait for it to open a second window in which you must enter the PIN. The default PIN is Once connected, you must access the "Settings" menu by touching the gear icon, and set the configuration parameters. Menu configuration The menu is divided into sections, each relating to an indicator. The settings are saved on the unit, so they will have no effect if you change them when the unit is disconnected. TACHOMETER Max Rpm select the desired rpm scale for the tachometer Filter if the tachometer reading is unstable, adjust this value to smooth ignition coil noise

6 Page 6 Sparks Per 2 Revolutions The number of sparks that the coil from which the signal is taken produces every 2 revolutions of the crankshaft. If you do not know this value refer to Table 3. If you do not fall into the category indicated in Table 3, proceed experimentally. CYLINDERS COUNT COILS COUNT VALUE Table or or or or 2 Shift light Set rpm of shift light SPEEDOMETER Units Select whether you want the units in miles or kilometers Source Select whether to use the Android device's GPS or the speed sensor to determine the speed and distances Millimeters per pulse This value represents the millimeters of circumference of the wheel that exist between 2 pulses of the speed sensor. In practice, if one magnet is mounted directly on the wheel the value will be equal to the circumference of the wheel. If 3 magnets are mounted, the value will be equal to the circumference / 3. If the sensor is mounted on the front sprocket, apply the formula: [wheel circumference / (rear sprocket teeth / front sprocket teeth) / pole wheel teeth]. This setting has no effect if you are using the GPS as the source. Filter This setting allows you to adapt to different types of sensor. Increase the value until the speed indication is stable. To reset the trip meter, long press the lcd display area. ENGINE TEMPERATURE GAUGE Load File Transfer the selected calibration file to the unit.(firmware >= 1.6) Save Sensor Save the current sensor to file.(firmware >= 1.6) Sensor Type Select NTC or PTC temperature sensor. Sensor Resistance For future compatibility choose 1000 ohm.

7 Page 7 Auto Calibration Mode (Firmware < 1.6) while this mode is active, the sensor is calibrated. The Android device must be connected. Each time this function is activated, the previous calibration is canceled. Activate it with cold engine and leave it on until the engine reaches operating temperature. During this period the indicator bar will blink, and the readings will not be accurate. Now clear the automatic calibration mode and run the engine until the cooling fan starts, then select Set Max Now. Step Calibration (Firmware >= 1.6) A calibration thermometer is required for this step. The sensor must be heated slowly up to 120 C, following the instructions on the display, set the temperature steps every 5 C. It is advisable, to remove the sensor from the vehicle and calibrate it on a test bench, for example heating oil surrounding the sensor and the thermometer. Do not use fluids that can boil at temperature lower than 120 C. FUEL LEVEL GAUGE Mode- It's possible to choose between three modes of use of the fuel gauge area: Time, in case the vehicle is not equipped with level sensor; Lamp + Time if the vehicle is equipped with reserve sensor; Bar graph, if the vehicle is equipped with a variable resistance level sensor. Invert- Reverses the sampling of the sensor. Select if the fuel level shown is reversed Auto Calibration Mode while this mode is active, the sensor is calibrated. The Android device must be connected. Each time this function is activated, the previous calibration is canceled. Enable it when the tank is empty, and turn it off after a full. During this period the indicator bar will blink, and the readings will not be accurate. Sensor Bias measure the sensor resistance to ground. Choose the closest value to your measurement from this menu. Disconnect the sensor while measuring. GEAR INDICATOR Show If selected, shows the gear indicator. Start Gears Calibration - When connected, it starts the gear indicator calibration procedure. It is necessary to calibrate all gears, starting with the first. Insert the gear shown on the gear indicator display. When on the move, start recording by touching the rightmost display and drive for a short distance, taking care not to use the clutch during this period. After recording the current gear, the gear indicator display will show the next gear to record. Engage the next gear, and continue the process until the last gear is reached. Once the highest gear is recorded, wait about 60 seconds. The recorded values will be saved automatically to, and the dashboard will return to normal mode. If you make mistakes during the procedure, wait until the normal mode appears, and repeat the procedure again. The previously saved values will be overwritten. This procedure must be done on a straight road. N.B. If you use the GPS as speed source, the indication may be inaccurate during hard acceleration, deceleration

8 Page 8 and when driving on bends due to the low refresh rate of the internal GPS module. BLUETOOTH SETTINGS Connect Mode some devices require different connection settings. If you experience difficulty or failure in connecting the device to, try a different mode. Link To Power Launcher set GT as app to be launched when Power Launcher is enabled. Connect Automatically selecting this option the connection will be estabilished automatically when the application is launched. This is the only option that is saved on your Android device. Auto Bluetooth Off selecting this option, Bluetooth will be disabled when the app is closed. Bluetooth Pin if you want, set a different pin from the default one to prevent unwanted connections. If the new pin is forgotten, the default pin can be restored using the hard reset function. the new PIN, will be asked on the next connection. Forget Paired Device Select this option to connect to another unit, different from the last connected. Rotate Screen this option rotates the app 180, to leave the battery charger socket on the opposite side. About opens a dialog window, showing software, hardware, and firmware versions. Hard reset function To hard reset the unit to the original settings, follow this procedure. Turn the key to "off" position. Connect the brown and the gray wires to power line (yellow wire). Turn the key ON and wait at least 15 seconds. Now turn OFF the key,and restore the standard connections of brown and gray wires. is now set as new.

9 Page 9 Troubleshooting On some Android devices were detected the following problems. If you are in one of the following conditions, proceed as follows: - During devices discovery, the list contains empty fields Solution: close the search dialog, and retry to connect - The pin is not asked on the first connection, connection cannot start Solution: pair I-Dash directly from the Android device's settings menu. - The connection cannot be estabilished, the connection indicator stay yellow flashing Solution: try a different connect mode under "bluetooth settings".if the list of paired devices contains an audio device (headphones or speakers), remove it. For any issue, please visit our website and contact us

Setup for using our speedometer with GPS sensor

Setup for using our speedometer with GPS sensor Setup for using our speedometer with GPS sensor Wiring: Speedometer red (1) power +12V Speedometer black (5) - ground Speedometer green (4) LED illumination (can be 12V) Speedometer blue (7) signal input,

More information

INSTALLATION GUIDE Multi-Gauge Set with sending units Part Number: M 9999

INSTALLATION GUIDE Multi-Gauge Set with sending units Part Number: M 9999 Made in America Lifetime Guarantee Thank you for purchasing this instrument set from Intellitronix. We value our customers! INSTALLATION GUIDE Multi-Gauge Set with sending units Part Number: M 9999 * Always

More information

Caution! Some procedures must be followed in order to avoid damages from occuring to the vehicle.

Caution! Some procedures must be followed in order to avoid damages from occuring to the vehicle. Thank you for purchasing KOSO's TNT-04 meter. Please read the instructions carefully and retain them for future reference. Notice To avoid a short circuit from occuring do not pull or modify the wires

More information

Overview of operation modes

Overview of operation modes Overview of operation modes There are three main operation modes available. Any of the modes can be selected at any time. The three main modes are: manual, automatic and mappable modes 1 to 4. The MapDCCD

More information

INSTALLATION GUIDE Ford Mustang Digital Dash Panel Part Number: DP7009 Year Series:

INSTALLATION GUIDE Ford Mustang Digital Dash Panel Part Number: DP7009 Year Series: Made in America Lifetime Guarantee Thank you for purchasing this gauge panel from Intellitronix. We value our customers! INSTALLATION GUIDE Ford Mustang Digital Dash Panel Part Number: DP7009 Year Series:

More information

Part Number DP6003 Chevy Truck Digital Dash YEARS 67-72

Part Number DP6003 Chevy Truck Digital Dash YEARS 67-72 Part Number DP6003 Chevy Truck Digital Dash YEARS 67-72 KIT COMPONENTS: One (1) Digital Circuit Board One (1) Smoked Acrylic See-Through Lens *Peel off protective covering from both sides of lens attached

More information

Full Sweep Minor Gauge Wiring:

Full Sweep Minor Gauge Wiring: Full Sweep Minor Gauge Wiring: Notes on Senders: Temp Hi match/vdo 150C: Normally used in Oil temp, 140 280F. Temp Low match/vdo120c: Normally used in water temp, 100 240F. To test the gauges work (oil,

More information

TOYOFAN SYSTEM REQUIREMENTS

TOYOFAN SYSTEM REQUIREMENTS TOYOFAN SYSTEM REQUIREMENTS 1- Electrical skills (understand this manual before starting, don't hesitate to send questions), a compatible car with electric radiator fan(s) 2 - An 2.3.3 and higher android

More information

INSTALLATION GUIDE Chevrolet Monte Carlo Dash Panel Part Number: DP9002 Year Series:

INSTALLATION GUIDE Chevrolet Monte Carlo Dash Panel Part Number: DP9002 Year Series: Made in America Lifetime Guarantee Thank you for purchasing this instrument from Intellitronix. We value our customers! INSTALLATION GUIDE Chevrolet Monte Carlo Dash Panel Part Number: DP9002 Year Series:

More information

Package Contents: Transferring Data to a PC

Package Contents: Transferring Data to a PC -------------------------------------------------------------------------------------------- P/N: 250-DS-UDXSR --------------------------------------------------------------------------------------------

More information

INSTALLATION GUIDE Chevrolet Impala/Caprice Digital Dash Panel Part Number: DP1208 Year Series: 1968

INSTALLATION GUIDE Chevrolet Impala/Caprice Digital Dash Panel Part Number: DP1208 Year Series: 1968 Made in America Lifetime Guarantee Thank you for purchasing this instrument from Intellitronix. We value our customers! INSTALLATION GUIDE Chevrolet Impala/Caprice Digital Dash Panel Part Number: DP1208

More information

DP10001 UNIVERSAL 5 GAUGE DIGITAL PANEL

DP10001 UNIVERSAL 5 GAUGE DIGITAL PANEL Nordskog Performance Products DP10001 UNIVERSAL 5 GAUGE DIGITAL PANEL **Before beginning the installation, read through these instructions thoroughly. Also, disconnect the positive battery cable to avoid

More information

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 Year Series:

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 Year Series: Made in America Lifetime Guarantee Thank you for purchasing this instrument panel from Intellitronix. We value our customers! INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 Year Series:

More information

Thank you for purchasing this instrument from Intellitronix. We value our customers!

Thank you for purchasing this instrument from Intellitronix. We value our customers! Made in America Lifetime Guarantee Thank you for purchasing this instrument from Intellitronix. We value our customers! INSTALLATION GUIDE Corvette Digital Dash Panel Part Number: DP2003 Year Series: 1984-1989

More information

MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER

MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER *To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating VSS, Tachometer,

More information

OMEGA KUSTOM INSTRUMENTS

OMEGA KUSTOM INSTRUMENTS 4O5O 6O 7O 8O 9O 1OO MPH 3O 1OO 2O Gauge Installation Manual 1O O OMEGA KUSTOM INSTRUMENTS 14O 12O 13O Operations Omega Kustom Gauges Speedometer: The speedometer can be set up to display MPH or KPH. There

More information

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 YEAR SERIES:

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 YEAR SERIES: Intelligent Electronics INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6002 YEAR SERIES: 1964-1966 * Disconnect the battery before attempting any electrical work on your vehicle. * KIT

More information

Attention! 1 Accessories. 2-1 Installation description ❹ ❺. Please proceed as follows

Attention! 1 Accessories. 2-1 Installation description ❹ ❺. Please proceed as follows Thank you for purchasing the TNT-B meter for Yamaha Bolt. Before installing, please read the instruction carefully and keep it for future reference. Attention! For installation, please follow the steps

More information

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6004 Year Series:

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6004 Year Series: INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6004 Year Series: 1973-1987 * Disconnect the battery before attempting any electrical work on your vehicle. * KIT COMPONENTS Three (3) Digital

More information

CONTROL BOX. Wiring the control box into the vehicle. +12V

CONTROL BOX. Wiring the control box into the vehicle. +12V CONTROL BOX Once the display panel is in place, mount the control box within the connecting cable's distance (approximately 3 feet) and secure to the underside of the dashboard. This case does not have

More information

INSTALLATION GUIDE Six Gauge Universal Digital Dash Panel Part Number: DP10002

INSTALLATION GUIDE Six Gauge Universal Digital Dash Panel Part Number: DP10002 Made in America Lifetime Guarantee Thank you for purchasing this digital dash panel from Intellitronix. We value our customers! INSTALLATION GUIDE Six Gauge Universal Digital Dash Panel Part Number: DP10002

More information

Switch select of sender types:

Switch select of sender types: Full sweep minor gauges wiring: B -------------------------------------------------- battery or +12V input. L -------------------------------------------------- LED illumination, for back lighting, dimmable.

More information

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6003 Year Series:

INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6003 Year Series: INSTALLATION GUIDE Chevrolet Digital Dash Panel Part Number: DP6003 Year Series: 1967-1972 * Disconnect the battery before attempting any electrical work on your vehicle. * KIT COMPONENTS One (1) Digital

More information

Classic Instruments Ford F100. Installation Manual

Classic Instruments Ford F100. Installation Manual Classic Instruments 1953 1955 Ford F100 Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mount New Gauge Cluster... 4 Instrument Cluster Wiring... 5 Speedometer

More information

Tach-Force Chevy Truck

Tach-Force Chevy Truck Classic Instruments Tach-Force 1955 1959 Chevy Truck Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mount New Gauge Cluster... 4 Instrument Cluster Wiring... 5

More information

AURORA SERIES GAUGES FUEL GAUGE SUGGESTED TOOLS AND MATERIALS. 3 3 /8 in (85.7 mm) PARTS LIST

AURORA SERIES GAUGES FUEL GAUGE SUGGESTED TOOLS AND MATERIALS. 3 3 /8 in (85.7 mm) PARTS LIST GAUGE INSTALLATION. Select mounting locations for the fuel gauge. 2. Cut a 2 /6 (52 mm) diameter hole for the gauge and test for proper fitmate. 3. Tighten the gauge with the enclosed Aurora Mounting Clamp

More information

MapDCCD Version 2 Installation and setup guide

MapDCCD Version 2 Installation and setup guide MapDCCD Version 2 Installation and setup guide Overview of operation modes There are three main operation modes available. Any of the modes can be selected at any time. The three main modes are: manual,

More information

LAMBDA SENSOR CONTROLLER

LAMBDA SENSOR CONTROLLER LAMBDA SENSOR CONTROLLER INSTALLATION & PROGRAMMING MANUAL version : V1.77 -V1.79 Manufacturer: AC Spółka Akcyjna. 15-182 Białystok, ul. 27 Lipca 64, Poland tel. +48 85 7438148, fax +48 85 653 8649 www.ac.com.pl,

More information

6 Gauge Box Set IS0333

6 Gauge Box Set IS0333 Caution 6 Gauge Box Set IS0 Rev. B ecr 882 9/202 Disconnect the battery during installation. Tighten nuts on the back clamp only slightly more than you can tighten with your fingers. Six inch-pounds of

More information

Series II ODYR/SLX-01-1-C PERFORMANCE SPEEDOMETER

Series II ODYR/SLX-01-1-C PERFORMANCE SPEEDOMETER Series II ODYR/SLX-01-1-C PERFORMANCE SPEEDOMETER MOUNTING: The gauge requires a round hole 3-3/8 in diameter. It should be inserted into the opening from the front and the U-clamp will be installed from

More information

Please check our application list to see if we have a specific Harness Kit available for your motorcycle.

Please check our application list to see if we have a specific Harness Kit available for your motorcycle. GIpro X-type Install Guide for GPX-WSS Harness Kit Compatibility: This universal harness kit includes a Wheel Speed Sensor and will fit all motorcycles and vehicles which have electronic ignition system.

More information

Installation & Calibration

Installation & Calibration Installation & Calibration ED2E Elite SkidWeigh System Lift Truck On-board Weighing Scale ED2-Elite V1.0 General Installation Guide This ED2-Elite SkidWeigh system installation & calibration guide describes

More information

Function description

Function description Function description The Display unit, which Drenth can supply, has the following options: Gearindication: The gear indicator displays the selected gear by measuring the position of the selector barrel

More information

Classic Instruments & 1956 Chevy. Installation Manual

Classic Instruments & 1956 Chevy. Installation Manual Classic Instruments 1955 & 1956 Chevy Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Disassemble Original Gauge... 4 Assemble New Gauge Cluster... 5 Speedo, Tach,

More information

MODEL HLY-2001 rev. B TANK MOUNT SPEEDOMETER/TACHOMETER INFORMATION SYSTEM

MODEL HLY-2001 rev. B TANK MOUNT SPEEDOMETER/TACHOMETER INFORMATION SYSTEM MODEL HLY-2001 rev. B TANK MOUNT SPEEDOMETER/TACHOMETER INFORMATION SYSTEM Please read this before beginning installation or wiring. POWER Connect the red wire from the main harness to accessory power

More information

Wallbox Commander. User Guide WBCM-UG-002-EN 1/11

Wallbox Commander. User Guide WBCM-UG-002-EN 1/11 Wallbox Commander User Guide 1/11 Welcome to Wallbox Congratulations on your purchase of the revolutionary electric vehicle charging system designed with cuttingedge technology to satisfy your daily needs.

More information

RR4T USA - RS4T USA

RR4T USA - RS4T USA RR4T - RS4T 400-450 - 525 RR4T - RS4T 400-450-525 The information described in this enclosure are updates to the Europe version Label location RR4T... 2 Label location RS4T... 3 Controls RR4T... 4 Controls

More information

6 Gauge Box Set with Programmable Speedometer. Made in the USA. Caution. Speedometer Parts. Tachometer Parts. Fuel Level Gauge Parts.

6 Gauge Box Set with Programmable Speedometer. Made in the USA. Caution. Speedometer Parts. Tachometer Parts. Fuel Level Gauge Parts. 6 Gauge Box Set with Programmable Speedometer Caution Disconnect the battery during installation. Tighten nuts on the backclamp only slightly more than you can tighten with your fingers. Six inch-pounds

More information

HLY-3016 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO (weather and vibration resistant for exposed environments)

HLY-3016 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO (weather and vibration resistant for exposed environments) HLY-3016 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO (weather and vibration resistant for exposed environments) *To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators

More information

MODEL MCV-7000 series SPEEDOMETER/TACHOMETER INFORMATION GAUGE Please read this before beginning installation or wiring.

MODEL MCV-7000 series SPEEDOMETER/TACHOMETER INFORMATION GAUGE Please read this before beginning installation or wiring. MODEL MCV-7000 series SPEEDOMETER/TACHOMETER INFORMATION GAUGE Please read this before beginning installation or wiring. IMPORTANT NOTE! This gauge has an odometer preset option that is only available

More information

MSD Programmable Shift Controller PN 75591

MSD Programmable Shift Controller PN 75591 MSD Programmable Shift Controller PN 75591 WARNING: During installation, disconnect the battery cables. When disconnecting, always remove the Negative cable first and install it last. Parts Included: 1

More information

Classic Instruments Chevy. Installation Manual

Classic Instruments Chevy. Installation Manual Classic Instruments 1951 1952 Chevy Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Included Mounting Hardware... 4 Mounting Gauges... 5 4 5/8 Speedometer Wiring

More information

System III Wiring Information 54-12

System III Wiring Information 54-12 System III Wiring Information 54-12 System Operation General Information Initial Power On Description of Revisions: This service bulletin is updated and replaces the version dated September 2002. This

More information

SPEED SHIFT/TWO-STEP MODULE INSTALLATION MANUAL

SPEED SHIFT/TWO-STEP MODULE INSTALLATION MANUAL SPEED SHIFT/TWO-STEP MODULE INSTALLATION MANUAL ALTHOUGH THIS PRODUCT HAS BEEN THOROUGHLY TESTED KPIERSON TECHNOLOGIES ASSUMES NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY RESULT BY THE INSTALLATION OF THIS

More information

ELD DRIVER GUIDE June 21, 2018

ELD DRIVER GUIDE June 21, 2018 ELD DRIVER GUIDE June 21, 2018 Contents Getting Started with PrePass ELD...4 Enroll in the PrePass ELD Program... 4 For a Carrier Enroll in the ELD Service... 4 For a Driver Get Driver Login Information...

More information

Installation & Calibration

Installation & Calibration Installation & Calibration ED2-AT Series SkidWeigh System Lift Truck On-board Check Weighing With Accumulative Load Weight Total ED2-AT Series SkidWeigh V.1.1 General Installation Guide This ED2-AT Series

More information

Classic Instruments Chevelle. Installation Manual

Classic Instruments Chevelle. Installation Manual Classic Instruments 1964 1965 Chevelle Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Included Mounting Hardware... 4 Mounting Gauges... 5 Wiring Diagram... 6

More information

COMBINATION SPEEDOMETER/TACHOMETER GAUGE KIT J

COMBINATION SPEEDOMETER/TACHOMETER GAUGE KIT J COMBINATION SPEEDOMETER/TACHOMETER GAUGE KIT J05306 2015-04-24 GENERAL Figure 1. Title 49, United States Code GENERAL (Continued) Table 1. Speedometer Features Available MODELS FEATURES GEAR INDICATOR

More information

RaceTCS holds no responsibility for damages caused by improper installation or use.

RaceTCS holds no responsibility for damages caused by improper installation or use. RaceTCS is designed for motorsport use only and cannot be used on public roads. Incorrect installation of RaceTCS might result in damage to RaceTCS or other car components. RaceTCS holds no responsibility

More information

INSTALLATION GUIDE Table of Contents

INSTALLATION GUIDE Table of Contents CT-3100 Automatic transmission remote engine starter systems. What s included..2 INSTALLATION GUIDE Table of Contents Door lock toggle mode..... 4 Notice...2 Installation points to remember. 2 Features..2

More information

Model: AEM14 Analog Engine Monitor

Model: AEM14 Analog Engine Monitor Model: AEM14 Analog Engine Monitor Installation and Setup Manual Version 1 Table of Contents Monitor Overview DMK Engine Monitor Kit Section 1: Initial Setup 1.1 Internal Settings Switches Figure 1. AEM14

More information

HLY-3015 MINI SPEED/TACH INFORMATION SYSTEM (weather and vibration resistant for exposed environments)

HLY-3015 MINI SPEED/TACH INFORMATION SYSTEM (weather and vibration resistant for exposed environments) HLY-3015 MINI SPEED/TACH INFORMATION SYSTEM (weather and vibration resistant for exposed environments) Neutral Left turn Low voltage Right turn High beam Engine Low oil *To avoid damage to motorcycle,

More information

Daymak Drive Application ios. User Guide

Daymak Drive Application ios. User Guide Daymak Drive Application ios User Guide Thank You Thank you for your purchase of our Daymak product. By choosing to utilize an electric vehicle, you are actively doing your part to reduce your carbon footprint.

More information

UTV-1000 Multi Gauge for Yamaha Rhino

UTV-1000 Multi Gauge for Yamaha Rhino IMPORTANT NOTE! This gauge has an hour meter and odometer preset option available only for the first 1.0 engine hour and 10 miles (16km). See ODO/HR PRESET for instructions. UTV-1000 Multi Gauge for 2004-2006

More information

Mustang. Installation Manual. Revision 11/16/10

Mustang. Installation Manual. Revision 11/16/10 1967-1968 Mustang Installation Manual Revision 11/16/10 I Table of Contents TABLE OF CONTENTS...II WELCOME TO THE TEAM OF CLASSIC INSTRUMENTS!... III REMOVE ORIGINAL INSTRUMENT PANEL...1 DETERMINE SPEEDOMETER

More information

Classic Instruments. Ultimate Speedometer & Speed-Tachular. Installation Manual

Classic Instruments. Ultimate Speedometer & Speed-Tachular. Installation Manual Classic Instruments Ultimate Speedometer & Speed-Tachular Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Gauge Wiring... 4 Ultimate Speedometer Wiring Diagram...

More information

MODEL MVX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER

MODEL MVX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER MODEL MVX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER Wiring Diagram The MVX-2011 gauges will work on 2011-up Softail models with 5 gauges or 2012-up Dyna models with 5 gauges. It is a direct plug in on these

More information

Speedo With Telltales and Display 85mm Tech Support Instruction Sheet # A2C Rev

Speedo With Telltales and Display 85mm Tech Support Instruction Sheet # A2C Rev Gauge Installation: 1. Select the desired mounting location of the instrument. 2. Depending on your mounting situation it might be necessary to configure the gauge before installation. See page 2 - Setting

More information

5 Gauge Box Set IS0342

5 Gauge Box Set IS0342 Caution 5 Gauge Box Set IS0342 Rev. B ecr 8832 9/202 Disconnect the battery during installation. Tighten nuts on the back clamp only slightly more than you can tighten with your fingers. Six inch-pounds

More information

WOT Box Installation Instructions VW / Audi

WOT Box Installation Instructions VW / Audi Connector Pinout Pin Color AWG Name WOT Box Installation Instructions VW / Audi Description 1 Yellow 18 RPM Connect to Fuel Injector Drive Signal or Ignition Control Signal (varies by car model) 2 Black

More information

Classic Instruments Cluster. Installation Manual

Classic Instruments Cluster. Installation Manual Classic Instruments 6400 Cluster Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mount New Gauge Cluster... 4 Instrument Cluster Wiring... 5 Speedometer & Tachometer

More information

The next generation car to smartphone technology is here. Kiwi 3 User Manual V1.0.6

The next generation car to smartphone technology is here. Kiwi 3 User Manual V1.0.6 The next generation car to smartphone technology is here. Kiwi 3 User Manual V1.0.6 Contents Setup... 2 1. Locate your car s OBDII port and plug in Kiwi 3...2 2. Launch your favorite app and enjoy...2

More information

Classic Instruments Camaro. Installation Manual. Revised: January 6, 2015 Page 1

Classic Instruments Camaro. Installation Manual. Revised: January 6, 2015 Page 1 Classic Instruments 1967 1968 Camaro Installation Manual Revised: January 6, 2015 Page 1 Contents Welcome from the Team at Classic Instruments!... 3 Remove Original Instrument Panel... 4 New Instrument

More information

TECHNOLOGY REFERENCE GUIDE

TECHNOLOGY REFERENCE GUIDE TECHNOLOGY REFERENCE GUIDE owners.honda.com 2014 Honda CR-V LX, EX, EX-L, and EX-L with RES 31T0AA20 Technology Reference Guide 00X31-T0A-A201 2013 American Honda Motor Co., Inc. All Rights Reserved Printed

More information

Defi Meter C Application User s Guide

Defi Meter C Application User s Guide Defi Meter C Application User s Guide BEFORE INSTALLATION 1 Download the App Search Defi Meter C Application through Google Play and download the App. 2 Pairing your mobile device with the SMART ADAPTER

More information

PHOENIX TACHOMETER WITH OLED DISPLAY

PHOENIX TACHOMETER WITH OLED DISPLAY PHOENIX TACHOMETER WITH OLED DISPLAY REV A0031418 PROGRAMMABLE TACHOMETER WIRING Standalone tachometers with AMP plugs are incandescent perimeter, backlit or LED backlit. Incandescent bulbs will be in

More information

Indian Speedometer and Body Control Module Service Tool Users Guide

Indian Speedometer and Body Control Module Service Tool Users Guide Indian Speedometer and Body Control Module Service Tool Users Guide Installing speedometer software to your computer 1. Go to the Indian Motorcycle Website: WWW. Indianmotorcycle.com 2. Log in to Service

More information

GENERAL ANDROID DEVICE RECOMMENDATIONS

GENERAL ANDROID DEVICE RECOMMENDATIONS GENERAL ANDROID DEVICE RECOMMENDATIONS The Edelbrock EFI E-Tuner app is compatible with most Android based Smartphones and tablets operating on Android 5.0 and later. However, due to slight variations

More information

Chevy Truck

Chevy Truck Classic Instruments 1947 1953 Chevy Truck Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mounting Gauges... 4 4 5/8 Speedometer Wiring [no included tachometer]...

More information

Automatic Sliding Door Retrofit Drive Assembly. Installation Manual DoorControlsUSA.com

Automatic Sliding Door Retrofit Drive Assembly. Installation Manual DoorControlsUSA.com Automatic Sliding Door Retrofit Drive Assembly Installation Manual 800-437-3667 DoorControlsUSA.com TABLE OF CONTENTS pg. 1. COMPONENTS 2 2. HEADER PREPARATION 2 3. DOOR PREPARATION 2 4. MOTOR AND CONTROLLER

More information

Gauge installation The MLX-2011 is designed to fit in the Fat Bob style five-inch diameter dash mount gauge openings.

Gauge installation The MLX-2011 is designed to fit in the Fat Bob style five-inch diameter dash mount gauge openings. MLX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER 2011-newer Harley Davidson Softail, 2012-newer Dyna and 2014-newer Road King models Included parts: MBM harness 2x 8-32 x ½ screw 2x #8 lock washer 2x L-bracket

More information

GENERAL MOTORS SERVICE PARTS OPERATION 6200 Grand Pointe Drive, Grand Blanc, MI 48439

GENERAL MOTORS SERVICE PARTS OPERATION 6200 Grand Pointe Drive, Grand Blanc, MI 48439 LS IGNITION CONTROLLER 19355418 Ignition Control for Carbureted LS Series Engines (24x Crankshaft Index/1x Camshaft Index, 58x Crankshaft Index/4x Camshaft Index) Parts Included Quantity Ignition Controller

More information

Lester Electrical ChargerConnect App User s Guide

Lester Electrical ChargerConnect App User s Guide Lester Electrical ChargerConnect App User s Guide Lester Electrical Summit Series II chargers features Bluetooth wireless communication, which can be accessed using an Apple or Android smart phone, tablet,

More information

Mustang. Installation Manual

Mustang. Installation Manual 1967-1968 Mustang Installation Manual I Table of Contents TABLE OF CONTENTS... II WELCOME TO THE TEAM OF CLASSIC INSTRUMENTS!... III REMOVE ORIGINAL INSTRUMENT PANEL... 1 DETERMINE SPEEDOMETER SIGNAL...

More information

MCL-30K-SPD IMPORTANT NOTE!

MCL-30K-SPD IMPORTANT NOTE! MCL-30K-SPD Thank you for purchasing the Dakota Digital MCL-30K-SPD gauge for your Harley Davidson Touring bike. This is designed to be a replacement for all touring models from 1996 2003. This is part

More information

NexSysLink. Operation Manual. NMEA 2000 SAE J1939 Indmar Engines. CAN Instruments Product Family

NexSysLink. Operation Manual. NMEA 2000 SAE J1939 Indmar Engines. CAN Instruments Product Family NexSysLink CAN Instruments Product Family Operation Manual NMEA 2000 SAE J1939 Indmar Engines Contact Beede Beede Electrical Instrument Company, Inc. 88 Village Street Penacook, NH 03303 (603) 753-6362

More information

Ford Mustang

Ford Mustang Classic Instruments 1965 1966 Ford Mustang Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mounting the Gauges... 4 3 3/8 Speedometer Wiring... 6 3 3/8 Speedometer

More information

MXL Strada / Pista Plug and Play kit for Kawasaki ZX-10 R

MXL Strada / Pista Plug and Play kit for Kawasaki ZX-10 R INSTALLATION DOCUMENTATION 1/03/2006 P&P KIT Installation procedure for MXL Strada / MXL Pista Kawasaki ZX6R-ZX6RR - 2003-2004-2005 kit Version 1.02 Kawasaki ZX10R 2003-2004-2005 MXL Strada / Pista Plug

More information

Rally computer 3 Rally computer 3.GPS *

Rally computer 3 Rally computer 3.GPS * Rally computer 3 Rally computer 3.GPS * User manual. Installation and configuration instructions. (with links to video instructions online at : www.rallycomputer.com ) * Content marked applies only to

More information

Phoenix Inverter

Phoenix Inverter Manual EN Handleiding NL Manuel FR Anleitung DE Manual ES Appendix Phoenix Inverter 12 250 12 375 12 500 12 800 24 250 24 375 24 500 24 800 48 250 48 375 48 500 48 800 1. Safety instructions WARNING: ELECTRIC

More information

Instruction of connection and programming of the VECTOR controller

Instruction of connection and programming of the VECTOR controller Instruction of connection and programming of the VECTOR controller 1. Connection of wiring 1.1.VECTOR Connection diagram Fig. 1 VECTOR Diagram of connection to the vehicle wiring. 1.2.Connection of wiring

More information

Classic Instruments Chevy. Installation Manual

Classic Instruments Chevy. Installation Manual Classic Instruments 1957 Chevy Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Mounting Gauges... 4 Speedo, Tach, Volt and Oil Pressure Gauge Wiring... 5 Speedo,

More information

User Manual WatchPower App

User Manual WatchPower App User Manual WatchPower App Management Software for Inverter Table of Contents 1. Introduction... 1 2. WatchPower App Install and Uninstall... 1 2.1. System Requirement... 1 2.2. Software Install... 1 2.3.

More information

MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER

MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER *To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating VSS, Tachometer,

More information

ION-01-6 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO

ION-01-6 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO ION-01-6 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO MOUNTING: It should be inserted into the opening from the front and the L-clamps will be installed from the back. Tighten the nuts on the L-clamps so that

More information

Contents Getting Started with PrePass ELD...4 Starting a Trip...7 During a Trip Co-Driver Features... 14

Contents Getting Started with PrePass ELD...4 Starting a Trip...7 During a Trip Co-Driver Features... 14 UPDATED February 2, 2018 Contents Getting Started with PrePass ELD...4 Enroll in the PrePass ELD Program... 4 For a Carrier Enroll in the ELD Service... 4 For a Driver Get Driver Login Information... 4

More information

123\SmartBMS. 123\SmartBMS manual V1.3. Albertronic BV The Netherlands

123\SmartBMS. 123\SmartBMS manual V1.3. Albertronic BV The Netherlands 123\SmartBMS 123\SmartBMS manual V1.3 Index Introduction... 2 Keep the batteries in perfect condition... 3 Package contents... 4 Specifications... 4 Placing the cell modules... 5 Mounting the IN Module...

More information

Ford Mustang. Installation Manual

Ford Mustang. Installation Manual 1965 1966 Ford Mustang Installation Manual TABLE OF CONTENTS Welcome from the Team at Classic Instruments! 3 Mounting Gauges in New Bezel 4 3 3/8 Speedometer Wiring 6 3 3/8 Speedometer Wiring Diagram 6

More information

WWW.MORETRACTION.COM TMS-5500-SL ELECTRONIC TRACTION CONTROL US PATENT 6,577,944 Other Patents Pending COPYRIGHT NOTICE Copyright 1999-2013 Davis Technologies, LLC. All rights reserved. Information in

More information

Introduction. Drenth Motorsport Gearboxes Fleuweweg AG Enter The Netherlands Phone: +31 (0) Fax: +31 (0)

Introduction. Drenth Motorsport Gearboxes Fleuweweg AG Enter The Netherlands Phone: +31 (0) Fax: +31 (0) 25.03.0023 Introduction The display unit comes with a software application. With the software application information shown on the display can be adjusted. There are different modes to adjust: the shape

More information

Installation Manual v1.6: Dodge 68RFE Automatic Transmission. Please read all instructions before the installation of the ATS Co-Pilot

Installation Manual v1.6: Dodge 68RFE Automatic Transmission. Please read all instructions before the installation of the ATS Co-Pilot Installation Manual v1.6: 2007.5-09 Dodge 68RFE Automatic Transmission Please read all instructions before the installation of the ATS Co-Pilot Thank you for purchasing the ATS Co-Pilot transmission management

More information

Lingenfelter NCC-002 Nitrous Control Center Quick Setup Guide

Lingenfelter NCC-002 Nitrous Control Center Quick Setup Guide Introduction: Lingenfelter NCC-002 Nitrous Control Center Quick Setup Guide The NCC-002 is capable of controlling two stages of progressive nitrous and fuel. If the NCC-002 is configured only for nitrous,

More information

Automotive Application ET01 Software Revision A 12/06

Automotive Application ET01 Software Revision A 12/06 Automotive Application ET01 Software Revision A 12/06 INTRODUCTION... 2 FUNCTIONAL DESCRIPTION... 3 INSTALLATION... 4 COMPONENT PLACEMENT... 4 PLUMBING AND WIRING... 5 MSBC OPERATION (ET-01)... 14 TIMED

More information

Features: Enhanced throttle response, excellent acceleration, linearity and driveability

Features: Enhanced throttle response, excellent acceleration, linearity and driveability 120A/150A ESC X-Car 120A/150A Series Sensored/Sensorless Brushless ESC for 1:8 scale Car or Truck Thank you for purchasing the X-Car Brushless Electronic Speed Controller (ESC). The X-Car 1:8 Scale 120A/150A

More information

EG DYNAMIC user manual

EG DYNAMIC user manual Timing Advance Processor EG DYNAMIC user manual ver. 1.1.0 dated 2012-10-01 This instruction can be also downloaded from: http://www.europegas.pl/en/technical-support/service-manuals Latest software version

More information

MXL Pista / MXL Strada KIT FOR SUZUKI GSX R

MXL Pista / MXL Strada KIT FOR SUZUKI GSX R INSTALLATION DOCUMENTATION 1/03/2006 Bike KIT Installation Manual: MXL kit for Suzuki GSX-R K5-K6 Version 1.02 Suzuki GSX R K5-K6 750cc 1000cc MXL Pista / MXL Strada KIT FOR SUZUKI GSX R 2005-2006 The

More information

OpenEVSE. Testing Basic and Advanced

OpenEVSE. Testing Basic and Advanced OpenEVSE Testing Basic and Advanced This guide provides both basic testing to ensure you OpenEVSE Charging Station is working correctly and an Advanced guide for Hardware and Software Developers to valicate

More information

Viewline Instrument Kit Installation Instructions. Rev E. Important Installation Notes:

Viewline Instrument Kit Installation Instructions. Rev E. Important Installation Notes: Read these instructions thoroughly before installation. Do not deviate from assembly or wiring diagram. Always disconnect battery ground before making any electrical connections. IMPORTANT: Mounting dimensions

More information

Commander IS0128 ISO128E ECR# /04. Tachometer/ Engine Hourmeter

Commander IS0128 ISO128E ECR# /04. Tachometer/ Engine Hourmeter Commander Tachometer/ Engine Hourmeter Analog Tachometer Digitally displays Hours Engine Has Been Run Fuel Level Other Features if Available: Fuel anagement Fuel Flow in GPH or LPH Total or Trip Fuel Used

More information

Mustang. Installation Manual

Mustang. Installation Manual 1967-1968 Mustang Installation Manual Table of Contents WELCOME FROM THE TEAM AT CLASSIC INSTRUMENTS!... 3 REMOVE THE ORIGINAL INSTRUMENT PANEL... 4 WIRING DIAGRAM... 6 WIRING THE NEW INSTRUMENT CLUSTER...

More information