PARTS MANUAL 3511B BACKHOE 3-POINT HITCH / CATEGORY II

Size: px
Start display at page:

Download "PARTS MANUAL 3511B BACKHOE 3-POINT HITCH / CATEGORY II"

Transcription

1 PARTS MANUAL 5B BACKHOE -POINT HITCH / CATEGORY II SERIAL NUMBER: Manual Number: PM87 Part Number: 7577 MODEL NUMBER: Rev I 50 Gay Street, Delhi, IA 5, United States of America Copyright

2

3 Limited Warranty Except for the Excluded Products as described below, all new products are warranted to be free from defects in material and/or workmanship during the Warranty Period, in accordance with and subject to the terms and conditions of this Limited Warranty.. Excluded Products. The following products are excluded from this Limited Warranty: (a) Any cable, part that engages with the ground (i.e. sprockets), digging chain, bearing, teeth, tamping and/or demolition head, blade cutting edge, pilot bit, auger teeth and broom brush that either constitutes or is part of a product. (b) Any product, merchandise or component that, in the opinion of Paladin Light Construction, has been (i) misused; (ii) modified in any unauthorized manner; (iii) altered; (iv) damaged; (v) involved in an accident; or (vi) repaired using parts not obtained through Paladin Light Construction.. Warranty Period. The Limited Warranty is provided only to those defects that occur during the Warranty Period, which is the period that begins on the first to occur of: (i) the date of initial purchase by an end-user, (ii) the date the product is first leased or rented, or (iii) the date that is six (6) months after the date of shipment by Paladin Light Construction as evidenced by the invoiced shipment date (the Commencement Date ) and ends on the date that is twenty-four () months after the Commencement Date.. Terms and Conditions of Limited Warranty. The following terms and conditions apply to the Limited Warranty hereby provided: (a) the product. Option to Repair or Replace. Paladin Light Construction shall have the option to repair or replace (b) Timely Repair and Notice. In order to obtain the Limited Warranty, (i) the product must be repaired within thirty (0) days from the date of failure, and (ii) a claim under the warranty must be submitted to Paladin Light Construction in writing within thirty (0) days from the date of repair. (c) Return of Defective Part or Product. If requested by Paladin Light Construction, the alleged defective part or product shall be shipped to Paladin Light Construction at its manufacturing facility or other location specified by Paladin Light Construction, with freight PRE-PAID by the claimant, to allow Paladin Light Construction to inspect the part or product. Claims that fail to comply with any of the above terms and conditions shall be denied. LIMITATIONS AND EXCLUSIONS. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY BASED ON A COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL PALADIN LIGHT CONSTRUCTION BE LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL PALADIN LIGHT CONSTRUCTION BE LIABLE FOR ANY LOSS OR CLAIM IN AN AMOUNT IN EXCESS OF THE PURCHASE PRICE, OR, AT THE OPTION OF PALADIN LIGHT CONSTRUCTION, THE REPAIR OR REPLACEMENT, OF THE PARTICULAR PRODUCT ON WHICH ANY CLAIM OF LOSS OR DAMAGE IS BASED. THIS LIMITATION OF LIABILITY APPLIES IRRESPECTIVE OF WHETHER THE CLAIM IS BASED ON BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHER CAUSE AND WHETHER THE ALLEGED DEFECT IS DISCOVERABLE OR LATENT. Attachment Technologies Inc., a subsidiary of Paladin Brands Holding, Inc. (PBHI) is referred to herein as Paladin Light Construction. February 0,

4 THIS PAGE IS INTENTIONALLY BLANK 7577

5 TABLE OF CONTENTS 5B BACKHOE SERVICE PARTS MAINFRAME ASSEMBLY #8809 Mainframe...-5 Swing Post Swing Cylinder Stabilizers...0- Hose Bundle Clamps...- -POINT HITCH ADAPTER KIT # BOOM & DIPPER ASSEMBLY # CONSOLE ASSEMBLY # VALVE ASSEMBLY # SERVICE PARTS CYLINDERS SWING CYLINDER # STABILIZER CYLINDER # BOOM CYLINDER # DIPPER CYLINDER # BUCKET CYLINDER # HOSE SETS MAINFRAME HOSE SET # BOOM & DIPPER HOSE SET # STABILIZER PAD OPTIONS FLAT STABILIZER PAD ASSEMBLY # GROUSER STABILIZER PAD ASSEMBLY # RUBBER STABILIZER PAD ASSEMBLY # FLIP OVER STABILIZER PAD ASSEMBLY # STABILIZER CYLINDER GUARDS # BUCKET OPTIONS FIRST LINE REPAIR KIT # DECALS

6 MAINFRAME ASSEMBLY ASSEMBLY #8809 MAINFRAME

7 MAINFRAME ASSEMBLY ASSEMBLY #8809 MAINFRAME ITEM REQ D PART NO. DESCRIPTION 8 Hose.50 X 8FJX - 8FJX Straight Bulkhead Connector 8MJ-8MJ (Includes Nut) 0587 Hose Mounting Bracket 00.5 UNC X.5 Hex Capscrew Flat Washer Lock Washer 7.5 UNC Hex Nut 8 8 Hose.50 X 8 8FJX-8FJX Elbow 8MJ-8FJX 0 7 Coupling 8FP-8FJX Close Nipple.50 NPT (Inline Filter) 09 Heavy Close Nipple.50 NPT x.00 (Check Valve) 5 Inline Filter (Round) 569 Check Valve (Hex) 8 90 Bulkhead Elbow (Includes Nut) UNC X.00 Hex Capscrew Flat Washer Spacer Tube Pin 666 Grease Zerk Thrust Washer.8 X Snap Ring 665 Bearing 889 Mainframe (Includes () 885 Bushings - Installed with Locktite 680) 8090 Swing Lock Pin As Req d 8975 Thrust Washer.8 X.0 As Req d 8976 Thrust Washer.8 X.09 As Req d 8977 Thrust Washer.8 X Lock Washer Hose Clamp Spacer Tube UNC X.5 Hex Capscrew Bushing 0 As Req d 58.6 SAE Flat Washer 6 Cotter Pin 8796 Linkage 98 Shoulder Screw 650 Snap Ring

8 MAINFRAME ASSEMBLY ASSEMBLY #8809 SWING POST

9 MAINFRAME ASSEMBLY ASSEMBLY #8809 SWING POST ITEM REQ D PART NO. DESCRIPTION 0.8" UNC X.00" Hex Capscrew 50.8" Lock Washer 5.8" Flat Washer 8807 Spacer Tube Pin Swing Post (Includes () 80 Bushings - Installed with Locktite Grade 680) Snap Ring 8 As Req'd 8975 Thrust Washer.8" X As Req'd 8976 Thrust Washer.8" X As Req'd 8977 Thrust Washer.8" X () Pivot Pin Grease Zerk 65 Snap Ring 66 Thrust Washer - 80 Bushing (Included in Swing Post Assembly) (Installed with Locktite Grade 680) 867 Pivot Pin Spacer Tube " Flat Washer " UNC X.00" Capscrew (Installed with Locktite Grade 680) NOTE: () Pivot Pin #860 is sold only in Pin Kit #867. Kit includes one pin #860, two thrust washers #66 and two snap rings #

10 MAINFRAME ASSEMBLY ASSEMBLY #8809 SWING CYLINDER MAINFRAME SWING POST

11 MAINFRAME ASSEMBLY ASSEMBLY #8809 SWING CYLINDER ITEM REQ D PART NO. DESCRIPTION As Req'd 5769 Thrust Washer.5" X.078" As Req'd 677 Thrust Washer.5" X.5" As Req'd 678 Thrust Washer.5" X.0" - 65 Self-Aligning Bushing (Included in Swing Cylinder Assembly) 887 Spacer Thrust Washer 5-8 Needle Bearing (Included in Swing Cylinder Assembly) Swing Cylinder Assembly (Includes () 8 Needle Bearings and () 65 Bushings) 666 Grease Zerk 06 Tee - Special Lateral Tee Grease Zerk 8 80 Pin " UNC X.00" Hex Capscrew 0 5.8" Flat Washer 8595 Spacer Tube 87.8" UNC Deformed Lock Nut Bushing (Included in Mainframe - Installed with Locktite Grade 680)

12 MAINFRAME ASSEMBLY ASSEMBLY #8809 STABILIZERS

13 MAINFRAME ASSEMBLY ASSEMBLY #8809 STABILIZERS ITEM REQ D PART NO. DESCRIPTION 8 65 Snap Ring As Req d 5769 Thrust Washer.5 X.078 As Req d 677 Thrust Washer.5 X.5 As Req d 678 Thrust Washer.5 X.0 () 886 Pin () Stabilizer Cylinder Assembly (.50 Rod) 666 Grease Zerk 5 89 Stabilzer Arm Pin 7 6 Cotter Pin NOTE: () Pivot Pin #886 is sold only in Pin Kit #86. Kit includes one pin #886, two thrust washers #677 and two snap rings #65. () Stabilizer Cylinder Assembly #86605 (.50" Rod Dia.) replaces Stabilizer Cylinder Assembly #897 (.5" Rod Dia.). If ordering replacement parts see Assembly Diagram and Parts list for your existing cylinder. If replacing a complete Stabilizer Cylinder, order Assembly #

14 HOSE BUNDLE CLAMPS

15 HOSE BUNDLE CLAMPS NO REQ'D PART NO. DESCRIPTION 0.8" UNC X.00" Hex Capscrew 878 Right Hose Bundle Clamp 87.8" UNC Deformed Lock Nut 878 Left Hose Bundle Clamp

16 MOUNTING INSTRUCTIONS -POINT HITCH ADAPTER KIT #

17 MOUNTING INSTRUCTIONS -POINT HITCH ADAPTER KIT #886 ITEM REQ D PART NO. DESCRIPTION 877 Center Double Link 5.75 UNC X.50 Hex Capscrew Hard Flat Washer 5.75 UNC Hex Locknut Center Single Link Hitch Lock Out Arm UNC X 5.00 Hex Capscrew Snap Ring Thrust Washer Pin.75 UNC X.75 Hex Capscrew 666 Klik Pin 887 Pin NOTE: USE HIGH STRENGTH PIN SUPPLIED BY YOUR TRACTOR MANUFACTURER TO ATTACH CENTER LINK TO TRACTOR

18 5B BOOM & DIPPER ASSEMBLY ASSEMBLY #

19 5B BOOM & DIPPER ASSEMBLY ASSEMBLY #9069 ITEM REQ D PART NO. DESCRIPTION Self Aligning Bushing (Included in Cylinder Assemblies) 8777 Dipper Cylinder Assembly 666 Grease Zerk As Req'd 66 Thrust Washer.8" x.0 As Req'd 67 Thrust Washer.8" x.090 As Req'd 675 Thrust Washer.8" x Boom Cylinder Assembly 666 Grease Zerk 5 0 Hose Sock Hose Clamp (Included in Console Assembly) 7 0.8" UNC X.00" Hex Capscrew " Lock Washer 9 5.8" Flat Washer 0 86 Hose Clamp Plate 86 Rubber Spacer Bushing (Included in Boom Assembly) (Installed with Locktite Grade 680) 97 Spring Pin 8666 Boom Lock Snap Ring 6 86 Pivot Pin " UNC Jam Nut Spring Washer 9 87 Guide Plate " UNC X.50" Hex FlangeHead Capscrew 860 Handle 8656 Handle Grip Boom Assembly (Includes () 8667 Bushings) (Installed with Locktite Grade 680) 666 Grease Zerk 5 86 Pivot Pin Flat Washer 87.8" UNC Deformed Lock Nut Double Hose Clamp NOTE: () Pivot Pin #86 is sold only in Pin Kit #865. Kit includes one pin #86, two thrust washers #66 and two snap rings #650. () Pivot Pin #86 is sold only in Pin Kit #869. Kit includes one pin #86, two thrust washers #66, two snap rings #650 and one grease zerk #

20 5B BOOM & DIPPER ASSEMBLY ASSEMBLY #

21 5B BOOM & DIPPER ASSEMBLY ASSEMBLY #9069 ITEM REQ D PART NO. DESCRIPTION Self-Aligning Bushing (Included in Cylinder Assembly) 985 () Bucket Cylinder Assembly (SN #797 & UP) 666 Grease Zerk Snap Ring As Req d 66 Thrust Washer.8 X.0 As Req d 67 Thrust Washer.8 X.090 As Req d 675 Thrust Washer.8 X () Pivot Pin () Pivot Pin Grease Zerk 8 65 Snap Ring 9 As Req d 66 Thrust Washer.75 X Bushing (Included in Dipper Assembly) (Install with Locktite Grade 680) 867 Pivot Pin 869 Spacer Tube Flat Washer UNC X.50 Hex Capscrew Dipper Assembly (Includes () 80 and () 860 Bushings) (Installed with Locktite Grade 680) 6 89 Dipper Link Plate Bushing (Included in Dipper Assembly) (Install with Locktite Grade 680) Dipper Link Bucket Link Pivot Pin 09 Pivot Pin NOTE: () Pivot Pin #866 is sold only in Pin Kit #868. Kit Includes one pin #866, two thrust washers #66 and two snap rings #650. () Pivot Pin #865 is sold only in Pin Kit #866. Kit Includes one pin #866, two thrust washers #66 and two snap rings #650. () When replacing the bucket cylinder on units UP TO SN #796, two #8766 extension hoses must also be ordered

22 CONSOLE ASSEMBLY ASSEMBLY #

23 CONSOLE ASSEMBLY ASSEMBLY #06 ITEM REQ D PART NO. DESCRIPTION 8588 Ball Handle 8795 Right Control Handle 8795 Left Control Handle 85 Rubber Boot M0 Hex Nut Boot Support UNC X.50 Hex Capscrew Lock Washer UNC X.75 Hex Capscrew Console Cover with Decals 806 Ball Handle - RED 87 Rod 8795 Spring 06. UNC X.00 Hex Capscrew Lock Washer 6 97 Spacer Tube Valve Mounting Plate UNC X.5 Hex Capscrew Console UNF Jam Nut 555 Balljoint 59.8 UNF Lock Nut 6980 Seat 87 Seat Mounting 5 5. Flat Washer 6 0. UNC X.75 Hex Capscrew UNC Nylock Nut Flat Washer UNC X.5 Hex Capscrew UNC X.75 Hex Capscrew 50.8 Lock Washer 5.8 Flat Washer 877 Cover Plate UNC X.75 Hex Capscrew

24 VALVE ASSEMBLY ASSEMBLY #

25 VALVE ASSEMBLY ASSEMBLY #6 ITEM REQ D PART NO. DESCRIPTION 69 Straight Connector 8MBo-6MJ Elbow - Long 6MJ-6FJX 5 57 Straight Connector 6MBo-6MJ 08 Straight Connector 6MBo-6MJ with.09 Restrictor Straight Connector FP-6FJX 6 85 Needle Valve (Swing Speed Control) 7 7 Straight Connector MP-6MJ Elbow 8MBo-8MJ Elbow 6MJ-6FJX Spool Monoblock Valve (Valve includes () 8587 stabilizer control levers and () 868 control knobs)

26 THIS PAGE IS INTENTIONALLY BLANK 7577

27 VALVE ASSEMBLY ASSEMBLY #056 STABILIZER CONTROL KNOB #868 STABILIZER CONTROL HANDLE #8587 LEFT JOYSTICK LEVER ASSEMBLY #59 STABILIZER CONTROL HANDLE #8587 RIGHT JOYSTICK LEVER ASSEMBLY #59 BOOM SWING BUCKET DIPPER LEFT STABILIZER RIGHT STABILIZER

28 VALVE ASSEMBLY VALVE ASSEMBLY #056 SERVICE PARTS VALVE BLOCK (NOT SOLD SEPARATELY)

29 VALVE ASSEMBLY ITEM REQ D PART NO. DESCRIPTION - 59 Joystick Lever Assembly (Left) - 59 Screw - 59 Support Pin Nut Ball Joint Support 8-59 Seal 9-59 Spacer Ball Joint VALVE ASSEMBLY #056 SERVICE PARTS Screw - 59 Joystick Lever Assembly (Right) - 59 Support Screw 5-59 Lever Cap Main Relief (600 PSI) Spacer 8-59 O Ring Circuit Relief Valve (600 PSI) 0-57 Anti-Cav. Circuit Relief Valve (600 PSI) - 59 Check Valve - 59 O Ring Plug O Ring Spacer Spool (Float) Float Assembly Positioner Assembly Valve Spool Spacer Circuit Relief Plug Circuit Relief Valve (900 PSI) Anti-Cav. Circuit Relief Valve (600 PSI) - 57 Anti-Cav. Circuit Relief Valve (900 PSI) NOT SHOWN - OPTIONAL CLOSED CENTER OR POWER BEYOND 598 # BSPP Plug (Functions as Closed Center Conversion or Power Beyond. See Maintenance and Service instructions in the Operator s manual for installation.)

30 CYLINDER ASSEMBLY SWING CYLINDER ASSEMBLY #

31 CYLINDER ASSEMBLY SWING CYLINDER ASSEMBLY #887 ITEM REQ D PART NO. DESCRIPTION 80 Cylinder Rod 7758 Cylinder Gland 8 Needle Bearing 8960 Cylinder Tube Piston 6 8 Hex Nut 7 65 Self Aligning Bushing 8 589* Rod Wiper 9 550* O'Ring 0 59* Poly Pak Seal 50* Back-Up Ring 509* O'Ring 5 Washer 6* O'Ring 5 6* Piston Ring 6 65* O'Ring NOTE: Seal Kit #567 Includes all parts marked with an asterisk (*). Parts are not sold separately

32 CYLINDER ASSEMBLY STABILIZER CYLINDER ASSEMBLY #86605 (.50 DIAMETER CYLINDER ROD)

33 CYLINDER ASSEMBLY STABILIZER CYLINDER ASSEMBLY #86605 (.50 DIAMETER CYLINDER ROD) ITEM REQ D PART NO. DESCRIPTION 8 Hex Nut 6* Teflon Piston Ring 65* O'Ring 6* O'Ring Cylinder Tube 6 509* O'Ring 7 50* Back-Up Ring 8 550* O'Ring 9 57* Rod Wiper Cylinder Rod 505 Piston 55* Poly-Pak Seal Cylinder Gland NOTE: Seal Kit #578 includes all parts marked with an asterisk (*). Parts are not sold separately

34 CYLINDER ASSEMBLY BOOM CYLINDER ASSEMBLY #

35 CYLINDER ASSEMBLY BOOM CYLINDER ASSEMBLY #8776 ITEM REQ D PART NO. DESCRIPTION Cylinder Tube 8 Hex Nut 879 Piston 608 Cylinder Gland Cylinder Rod Bushing 7 570* O-Ring 8 569* Teflon Piston Ring 9 6* O-Ring * O-Ring 6* Back-Up Washer 766* Gland Retainer Rod 55* Poly-Pak Seal 9* Rod Wiper NOTE: Seal Kit #559 includes all parts marked with an asterisk (*). Parts are not sold separately

36 CYLINDER ASSEMBLY DIPPER CYLINDER ASSEMBLY #

37 CYLINDER ASSEMBLY DIPPER CYLINDER ASSEMBLY #8777 ITEM REQ D PART NO. DESCRIPTION 8776 Cylinder Tube 8 Hex Nut 86 Piston 559 Cylinder Gland Cylinder Rod Bushing 7 570* O-Ring 8 569* Teflon Piston Ring 9 865* O-Ring * O-Ring 6* Back-Up Washer 766* Gland Retainer Rod 59* Poly-Pak Seal 58* Rod Wiper NOTE: Seal Kit #55 includes all parts marked with an asterisk (*). Parts are not sold separately

38 CYLINDER ASSEMBLY BUCKET CYLINDER ASSEMBLY #

39 CYLINDER ASSEMBLY BUCKET CYLINDER ASSEMBLY #985 ITEM REQ D PART NO. DESCRIPTION 9855 Cylinder Tube 8 Hex Nut 5590 Piston 559 Cylinder Gland Cylinder Rod Bushing 7 570* O-Ring 8 569* Teflon Piston Ring 9 865* O-Ring * O-Ring 6* Back-Up Washer 766* Gland Retainer Rod 57* Poly-Pak Seal 505* Rod Wiper NOTE: Seal Kit #55 includes all parts marked with an asterisk (*). Parts are not sold separately

40 MAINFRAME HOSE SET BUCHER MONOBLOCK VALVE HOSE KIT #08 B C D HYDRAULIC CONTROL VALVE A E F G K L H I J -J MAINFRAME D J B H C I -H -D SWING CYLIN- DERS RIGHT STABILIZER CYLINDER -B #06 TEE (LOCATED IN THE MAINFRAME ASSEMBLY) -I -C LEFT STABILIZER CYLINDER

41 MAINFRAME HOSE SET BUCHER MONOBLOCK VALVE HOSE KIT #08 ITEM REQ D PART NO. DESCRIPTION 589 Hose Assembly.5 X 60 6FJX - 6FJX 7700 Hose Assembly.5 X.50 6FJX - 6FJX 90 Gooseneck 755 Hose Assembly.5 X.50 6FJX - 6FJX 7699 Hose Assembly.5 X 7 6FJX - 6FJX NOTE: Refer to the mainframe assembly for the priority valve hoses which are included in this assembly but have been shown in the mainframe assembly for clarity. NOTE: Letters on the hose set diagram show the hydraulic hose routing between the backhoe control valve and the various hydraulic cylinders. Simply match the letter on the control valve port to the same letter on the hydraulic hose ends. Example: Hose Assembly labeled "C" runs from the upper Left Stabilizer port on the hydraulic control valve - through the mainframe and to the barrel end fitting on the left stabilizer cylinder. NOTE: The fittings on the hydraulic cylinders have been altered for clarity purposes. this will assist you in distinguishing between the rod end and the barrel end of the various hydraulic cylinders

42 5B BOOM & DIPPER HOSE SET ASSEMBLY #8698 HYDRAULIC CONTROL VALVE A E F B C D H I J G K L DIPPER CYLINDER -F A G E K F L -L -E -A -G -K BOOM CYLINDER DIPPER BOOM (CUTAWAY VIEW) MAINFRAME SWING POST BUCKET CYLINDER

43 5B BOOM & DIPPER HOSE SET ASSEMBLY #8698 ITEM REQ D PART NO. DESCRIPTION 767 Hose Assembly.8" X 9" 6FJX - 6FJX 770 Hose Assembly.8" X 57.50" 6FJX - 6FJX 876 Hose Assembly.8 X FJX - 8FJX NOTE: Letters on the hose set diagram show the hydraulic hose routing between the backhoe control valve and the various hydraulic cylinders. Simply match the letter on the control valve port to the same letter on the hydraulic hose ends. EXAMPLE: Hose Assemby labeled "G" runs from the lower Boom port of the hydraulic control valve - through the mainframe and swing post and to the barrel end of the boom cylinder. NOTE: The fittings on the hydraulic cylinders have been altered for clarity purposes. This will assist you in distinguishing between the rod end and the barrel end of the various hydraulic cylinders

44 STABILIZER PADS

45 STABILIZER PADS ITEM REQ D PART NO. DESCRIPTION FLAT STABILIZER PAD ASSEMBLY - # Flat Stabilizer Pad GROUSER STABILIZER PAD ASSEMBLY - # Grouser Stabilizer Pad RUBBER STABILIZER PAD ASSEMBLY - # Rubber Stabilizer Pad Assembly (Includes Items through 0) 89 Stabilizer Pad 5 6.8" UNC Hex Nut " Lock Washer 7 5.8" Flat Washer Slide Plate 9 6 Rubber Strip Bundle " UNC X.50" Readi Bolt

46 STABILIZER PADS FLIP-OVER STABILIZER PAD ASSEMBLY #809 (COMPLETE SET OF () FLIP-OVER PADS - ASSEMBLY #8058)

47 STABILIZER PADS FLIP-OVER STABILIZER PAD ASSEMBLY #809 (COMPLETE SET OF () FLIP-OVER PADS - ASSEMBLY #8058) ITEM REQ D PART NO. DESCRIPTION 896 Flip-Over Pad 895 Spacer 65.5" Snap Ring VARIES 5769 Thrust Washer.5" X.078" VARIES 677 Thrust Washer.5" X.5" Pin " UNC Hex Deformed Lock Nut " Flat Washer Slide Plate 9 6 Rubber Strip Bundle " UNC X.50" Hex Capscrew 057.8" UNC X 5.00" Hex Capscrew

48 OPTIONAL STABILIZER CYLINDER COVER ASSEMBLY #

49 OPTIONAL STABILIZER CYLINDER COVER ASSEMBLY #86706 ITEM REQ D PART NO. DESCRIPTION 895 Stabilizer Cylinder Cover with Decal 67 No Step Decal " Clamp Assembly 89 Guide Ring " UNC X.50" Set Screw

50 BUCKET ASSEMBLIES

51 BUCKET ASSEMBLIES ITEM REQ D PART NO. DESCRIPTION - 00 Bucket (Includes Teeth and Bushings) Bucket (Includes Teeth and Bushings) Bucket (Includes Teeth and Bushings) Bucket (Includes Teeth and Bushings) 00 Bucket (Includes Teeth and Bushings) 00 Bucket (Includes Teeth and Bushings) Bucket (Includes Teeth and Bushings) Bucket (Includes Teeth and Bushings) Replacement Bushing Varies 78* Replacement Tooth Shank (Weld On) Varies 77* Replacement Spiral Roll Pin 5 Varies 886* Replacement Tooth (Bolt On) BUCKET SPECIFICATIONS BUCKET SIZE TOOTH QTY WEIGHT STRUCK CAPACITY RATED CAPACITY 5 LBS..5 CU. FT..5 CU. FT. 6 8 LBS..7 CU. FT..0 CU. FT LBS..95 CU. FT..5 CU. FT LBS..6 CU. FT..8 CU. FT. 80 LBS..65 CU. FT..57 CU. FT. 7 8 LBS..8 CU. FT. 5. CU. FT LBS..05 CU. FT CU. FT LBS..8 CU. FT CU. FT. NOTE: Tooth and Shank Assembly #8500 includes one each of all parts marked with an asterisk (*)

52 FIRST LINE REPAIR KIT ASSEMBLY #

53 FIRST LINE REPAIR KIT ASSEMBLY #8867 ITEM REQ D PART NO. DESCRIPTION 559 Seal Kit (Boom Cylinder) 55 Seal Kit (Bucket Cylinder) 55 Seal Kit (Dipper Cylinder) 578 Seal Kit (Stabilizer Cylinders) 567 Seal Kit (Swing Cylinder) 655 Bushing 666 Grease Zerk 886 Bucket Tooth Point Snap Ring.8 65 Snap Ring Thrust Washer.8 X Thrust Washer.5 X Cylinder Seal Install Tool 8 6 Cotter Pin

54 DECALS DECAL PLACEMENT GENERAL INFORMATION The diagrams on this page shows the location of all the decals used on the backhoes. The decals are identified by their part numbers, with reductions of the actual decals located on the following pages. Use this information to order replacements for lost or damaged decals. Be sure to read all decals before operating the backhoe. They contain information you need to know for both safety and backhoe longevity SERIAL NUMBER TAG (LOCATED ON BACK OF CONSOLE) 09 (LOCATED ON RIGHT SIDE OF BOOM) 0 MODEL NUMBER 08 LOGO 8 09 IMPORTANT: Keep all safety decals clean and legible. Replace all missing, illegible or damaged safety decals. When replacing parts with safety decals attached, the safety decals must also be replaced. REPLACING SAFETY DECALS: Clean the area of application with a nonflammable solvent, then wash the same area with soap and water. Allow the surface to dry. Remove the backing from the safety decal, exposing the adhesive surface. Apply the safety decal to the position shown in the diagram, and smooth out any bubbles

55 DECALS WARNING PART #05 HIGH PRESSURE FLUID DECAL PART #69 DANGER! BACKHOE SECURE IMPORTANT TO PREVENT BACKHOE DAMAGE: TO PREVENT SERIOUS INJURY OR DEATH: Do not operate or work on this machine without reading and understanding Operator's Manual. Avoid unsafe operation or maintenance. Do not operate machine with guards and covers removed. This machine was designed to be operated by one operator. Do not carry passengers on unit. Before installing backhoe on your unit extend boom and dipperstick and lower bucket to ground. Never use backhoe as manlift. Operate backhoe control levers from operator's seat only. Lower stabilizers and bucket to ground before leaving operator's seat. Engage boom lock and swing lock before transporting backhoe. PART #055 OPERATIONAL WARNING DECAL #055 DO NOT ATTACH TOW CHAIN TO DIPPER OR BUCKET. DO NOT REPEATEDLY SLAM SWING POST INTO SWING STOPS. PREPARATION FOR STORAGE LUBRICATE ALL GREASE POINTS. LEAVE AS MANY CYLINDERS IN CLOSED POSITION AS POSSIBLE. COVER ALL EXPOSED CYLINDER RODS WITH A LIGHT COAT OF GREASE. #057 PART #057 IMPORTANT! DECAL PART #09 DANGER! PINCH POINTS

56 DECALS PART #68 OPERATING CONTROLS DECAL PART #009 FLOAT DECAL PART #7 SWING SPEED CONTROL DECAL PART #09 BOOM LOCK DECAL PART #09 SWING LOCK DECAL

57 DECALS PART #06 CAUTION! BACKHOE LIMITATIONS PART #7 INLINE FILTER DECAL IMPORTANT NOTICE REGARDING -POINT HITCH BACKHOES. BRADCO MAKES NO CLAIMS OR WARRANTY, IM- PLIED OR OTHERWISE, as to the compatibility or structural integrity of any tractors -point hitch assembly or components when used with any BRADCO -point hitch type backhoe. Since many models of tractors have standard category hitches and backhoes have standard category attaching points, it is possible to mount tractor or backhoe combinations that are not compatible. DEALERS AND/OR OWNERS MUST DETERMINE THAT COMPATIBILITY BETWEEN THE TRACTOR AND BACK- HOE EXISTS. Compatibility includes, but is not limited to items such as operator clearance, hitch component strength, tractor case strength and hydraulics. Suggestions given as to hitch categories and horsepower ranges used with various models of backhoes are suggestions only and not recommendations as to suitability of any combination of tractors and backhoes. PART #07 WARNING! BRADCO also manufactures solid -point mounting kits for many models of tractors. These kits do NOT mount to the -Point hitch. If in doubt about your hitch compatibility, solid -point mounting type kit and backhoe should be used. #00 PART #00 IMPORTANT NOTICE NOTE: CONTACT PALADIN OR YOUR LOCAL DEALER FOR MODEL NUMBER AND LOGO DECALS

58 DECALS PART #0 BUCKET CONTACT WARNING DECAL PART #00 CALL BEFORE YOU DIG PART #8 MADE IN U.S.A. DECAL PART #08 GREASE 8 HOURS

59

485 BACKHOE PARTS MANUAL

485 BACKHOE PARTS MANUAL 85 BACKHOE PARTS MANUAL SERIAL NUMBER: Manual Number: PM08 Part Number: 5608 MODEL NUMBER: Rev. 800-56-00 I www.paladinlcg.com 50 Gay Street, Delhi, IA 5, United States of America 06 --0- Limited Warranty

More information

PARTS MANUAL 509 & 511 POWER BACKHOES. Part Number: MODEL NUMBER: Rev. 5

PARTS MANUAL 509 & 511 POWER BACKHOES. Part Number: MODEL NUMBER: Rev. 5 509 & 5 POWER BACKHOES PARTS MANUAL SERIAL NUMBER: Manual Number: OM576 Part Number: 7576 MODEL NUMBER: Rev. 5 800-56-700 I www.paladinlcg.com 50 Gay Street, Delhi, IA 5, United States of America 78 7--0-6

More information

3509 & 3511 BACKHOE 3-POINT HITCH / CATEGORY II PARTS MANUAL. Part Number: MODEL NUMBER: Rev. 4

3509 & 3511 BACKHOE 3-POINT HITCH / CATEGORY II PARTS MANUAL. Part Number: MODEL NUMBER: Rev. 4 509 & 5 BACKHOE -POINT HITCH / CATEGORY II PARTS MANUAL SERIAL NUMBER: Manual Number: PM609 Part Number: 5509 MODEL NUMBER: Rev. 800-56-00 I www.paladinlcg.com 50 Gay Street, Delhi, IA 5, United States

More information

Part Number: MODEL NUMBER: Rev. 7

Part Number: MODEL NUMBER: Rev. 7 609 & 6 POWER BACKHOES PARTS MANUAL SERIAL NUMBER: Manual Number: PM557 Part Number: 75457 MODEL NUMBER: Rev. 7 800-922-298 I www.paladinbrands.com P.O. Box 266, Delhi, IA 5222-0266, United States of America

More information

OPERATOR S AND PARTS MANUAL PALLET FORKS. Part Number: MODEL NUMBER: Rev. 4

OPERATOR S AND PARTS MANUAL PALLET FORKS. Part Number: MODEL NUMBER: Rev. 4 OPERATOR S AND PARTS MANUAL PALLET FORKS SERIAL NUMBER: Manual Number: OM642 Part Number: 75542 MODEL NUMBER: Rev. 4 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States of

More information

OPERATOR S AND PARTS MANUAL BALE HUGGER. Part Number: LAF1960 MODEL NUMBER: Rev. 2

OPERATOR S AND PARTS MANUAL BALE HUGGER. Part Number: LAF1960 MODEL NUMBER: Rev. 2 OPERATOR S AND PARTS MANUAL BALE HUGGER SERIAL NUMBER: Manual Number: MR25616 Part Number: LAF1960 MODEL NUMBER: Rev. 2 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States

More information

SERIAL NUMBER: Manual Number: Part Number: MODEL NUMBER: Rev. 2: January 27, 2010

SERIAL NUMBER: Manual Number: Part Number: MODEL NUMBER: Rev. 2: January 27, 2010 OPERATOR S & PARTS MANUAL 48-66 SIDE TILT FORK CARRIAGE SERIAL NUMBER: Manual Number: 76827 Part Number: 76827 MODEL NUMBER: Rev. 2: January 27, 2010 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi,

More information

OPERATOR S AND PARTS MANUAL BALE PUSH. Part Number: LAF1901 & 1959 MODEL NUMBER: Rev. 2

OPERATOR S AND PARTS MANUAL BALE PUSH. Part Number: LAF1901 & 1959 MODEL NUMBER: Rev. 2 OPERATOR S AND PARTS MANUAL BALE PUSH SERIAL NUMBER: Manual Number: MR15614 Part Number: LAF1901 & 1959 MODEL NUMBER: Rev. 2 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States

More information

OPERATOR S AND PARTS MANUAL ROOT RAKE

OPERATOR S AND PARTS MANUAL ROOT RAKE OPERATOR S AND PARTS MANUAL ROOT RAKE SERIAL NUMBER: MODEL NUMBER: Manual Number: OM711 Part Number: 75611 Rev. 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States of America

More information

SERIAL NUMBER: Manual Number: Part Number: & Rev. 3 MODEL NUMBER: Joppa, MD /9/14

SERIAL NUMBER: Manual Number: Part Number: & Rev. 3 MODEL NUMBER: Joppa, MD /9/14 SERIAL NUMBER: MODEL NUMBER: Manual Number: 51-10038 Part Number: 10714 & 10715 Rev. 3 1.888.888.1085 www.spartanequipment.com Joppa, MD 21085 1/9/14 Notes TABLE OF CONTENTS INTRODUCTION...2 GENERAL INFORMATION...

More information

OPERATOR S & PARTS MANUAL

OPERATOR S & PARTS MANUAL OPERATOR S & PARTS MANUAL X900 High Speed Auger Drive X1500 High Torque Auger Drive SERIAL NUMBER: Manual Number: 24772 MODEL NUMBER: Date: May, 2005 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi,

More information

Model 35 PARTS MANUAL

Model 35 PARTS MANUAL Model 35 PARTS MANUAL Version 3-2007 Ashland Industries Inc. 1115 Rail Drive P.O. Box 717 Ashland, WI. 54806 Ph: 877-634-4622 Toll Free Ph: 715-682-4622 Fx: 715-682-9717 www.ashlandind.com Model 35 Scraper

More information

INDEX BACKHOE WOODS BH750WD PARTS CATALOG HOME TRACTORS ATTACHMENTS. Backhoe Nomenclature

INDEX BACKHOE WOODS BH750WD PARTS CATALOG HOME TRACTORS ATTACHMENTS. Backhoe Nomenclature R Ingersoll BACKHOE WOODS BH750WD PARTS CATALOG 8-3060 HOME TRACTORS ATTACHMENTS BUCKETS... 7 CONTROLS...9 CYLINDERS Swing and Bucket...13 CYLINDERS Boom, Dipperstick and Stabilizer...15 DECALS...17 DIPPERSTICK...7

More information

OPERATOR S AND PARTS MANUAL POWER SIDE DISCHARGE (PSD) BUCKETS SAND & SAWDUST

OPERATOR S AND PARTS MANUAL POWER SIDE DISCHARGE (PSD) BUCKETS SAND & SAWDUST OPERATOR S AND PARTS MANUAL POWER SIDE DISCHARGE (PSD) BUCKETS SAND & SAWDUST 10714 SERIAL NUMBER: Manual Number: 51-10038 Part Number: 10714 & 10715 MODEL NUMBER: Rev. 3 800-456-7100 I www.paladinattachments.com

More information

Talet Equipment International Ltd. Sand Kicker

Talet Equipment International Ltd. Sand Kicker Talet Equipment International Ltd. Sand Kicker Parts & Operators Manual P.O. Box 35 Strathmore AB Canada TP K3 www.taletattachments.com sales@taletattachments.com Toll Free -888-37-5878 Fax -403-934-304

More information

OPERATOR S AND PARTS MANUAL HOLD DOWN LOGGING CARRIAGE

OPERATOR S AND PARTS MANUAL HOLD DOWN LOGGING CARRIAGE OPERATOR S AND PARTS MANUAL HOLD DOWN LOGGING CARRIAGE SERIAL NUMBER: Manual Number: 76830 Part Number: 76830 MODEL NUMBER: Rev.: March 27, 2013 800-456-7100 I www.paladinattachments.com 503 Gay Street,

More information

Parts Manual Vermeer/ McLaughlin V750 Vacuum Machine (Serial #7G G )

Parts Manual Vermeer/ McLaughlin V750 Vacuum Machine (Serial #7G G ) 2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/

More information

BACKHOES. Universal quick attach/mainframe mount

BACKHOES. Universal quick attach/mainframe mount BACKHOES For Skid Steer Loaders, Compact Tool Carriers, Compact Tractors and Compact Tractor Loaders Bradco Backhoes, by Paladin, are designed to fit compact tractors, compact tractor loaders, compact

More information

Operation and Parts Manual

Operation and Parts Manual Operation and Parts Manual 3-Point PTO and Hydraulic Stump Grinders Models: SC-25 and SC-25H SC-50 and SC-50H Safety Operation Maintenance Repair Troubleshooting Parts Parts SC-50 and SC-50-H Stumpbuster

More information

SNOWBLADE OPERATOR S AND PARTS MANUAL SERIAL NUMBER: MODEL NUMBER:

SNOWBLADE OPERATOR S AND PARTS MANUAL SERIAL NUMBER: MODEL NUMBER: OPERATOR S AND PARTS MANUAL SNOWBLADE SERIAL NUMBER: MODEL NUMBER: Manual Number: MR35537 Models: 11460, 11472, 11484, and 11496; 11584, 11596, 11508, 11520, 11532 and 11544; LAF5784, LAF5796, LAF5708,

More information

OPERATOR S AND PARTS MANUAL BB42 BUCKET SWEEPER

OPERATOR S AND PARTS MANUAL BB42 BUCKET SWEEPER OPERATOR S AND PARTS MANUAL BB42 BUCKET SWEEPER SERIAL NUMBER: MODEL NUMBER: Manual Number: OM686 Part Number: 75586 Rev. 800-456-7100 I www.paladinattachments.com 503 Gay Street, Delhi, IA 52223, United

More information

I-110 PARTS MANUAL Updated 3/21/01

I-110 PARTS MANUAL Updated 3/21/01 I-110 PARTS MANUAL Updated 3/21/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-100,

More information

THE TRACTOR AND/OR LOADER (IF EQUIPPED)

THE TRACTOR AND/OR LOADER (IF EQUIPPED) THE TRACTOR AND/OR LOADER (IF EQUIPPED) Read the tractor and/or loader operator s manual to learn how to operate your tractor and/or loader safely. Failure to do so could result in serious injury or death

More information

I-175 PARTS MANUAL Version 4-04

I-175 PARTS MANUAL Version 4-04 I-175 PARTS MANUAL Version 4-04 Ashland Industries Inc. 1115 Rail Drive P.O. Box 717 Ashland, WI. 54806 Ph: 877-634-4622 Toll Free Ph: 715-682-4622 Fx: 715-682-9717 www.ashlandind.com Model I-175 Scraper

More information

INSTALLATION INSTRUCTIONS FOR HD TILT ATTACH ASSEMBLY

INSTALLATION INSTRUCTIONS FOR HD TILT ATTACH ASSEMBLY INSTALLATION INSTRUCTIONS FOR HD TILT ATTACH ASSEMBLY PM-000034-A OCTOBER 2017 THIS PAGE IS INTENTIONALLY BLANK PM-000034-A OCTOBER 2017 TABLE OF CONTENTS PREFACE... 2 SAFETY PRECAUTIONS SAFETY STATEMENTS...

More information

MODEL I-900 SCRAPER INDEX

MODEL I-900 SCRAPER INDEX I-900 PARTS MANUAL Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-900 SCRAPER HOW TO

More information

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Revision Date: July 2017 Skid Pro PO Box 982 Alexandria, MN 56308 Toll Free: 877-378-4642 www.skidpro.com TABLE OF CONTENTS

More information

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include

More information

Part Number: MODEL NUMBER: Rev. 4

Part Number: MODEL NUMBER: Rev. 4 SERIAL NUMBER: Manual Number: OM695 Part Number: 75595 MODEL NUMBER: Rev. 4 6 10380 7-22-13- TABLE OF CONTENTS PREFACE... 3 SAFETY PRECAUTIONS SAFETY STATEMENTS... 5 GENERAL SAFETY PRECAUTIONS... 5-7

More information

1 TO THE PURCHASER TABLE OF CONTENTS SERVICE & PREPARATION... 5

1 TO THE PURCHASER TABLE OF CONTENTS SERVICE & PREPARATION... 5 SAFETY ALERT SYMBOL This is the Safety Alert Symbol used by this industry. This symbol is used to warn of possible injury. Be sure to read all warnings carefully. They are included for your safety and

More information

OPERATOR S AND PARTS MANUAL VP10 VIBRATORY PLOW. Part Number: MODEL NUMBER: Rev. 2

OPERATOR S AND PARTS MANUAL VP10 VIBRATORY PLOW. Part Number: MODEL NUMBER: Rev. 2 OPERATOR S AND PARTS MANUAL VP10 VIBRATORY PLOW SERIAL NUMBER: Manual Number: OM654 Part Number: 75554 MODEL NUMBER: Rev. 2 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States

More information

Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual

Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual The operator is responsible for the safe operation and maintenance of the machine. It is important that anyone who uses the machine is

More information

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual

Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Revision Date: May 12, 2017 Skid Pro PO Box 982 Alexandria, MN 56308 Toll Free: 877-378-4642 www.skidpro.com TABLE OF

More information

DISCLAIMER. COPYRIGHT 2010 by ATI Corporation 250 Earland Drive New Holland, PA U.S.A.

DISCLAIMER. COPYRIGHT 2010 by ATI Corporation 250 Earland Drive New Holland, PA U.S.A. COPYRIGHT 2010 by 250 Earland Drive U.S.A. DISCLAIMER THE INFORMATION IN THIS MANUAL IS PROVIDED TO PROMOTE THE SAFE USE OF, AND ASSIST THE OPERATOR IN ACHIEVING THE BEST PERFORMANCE FROM, PARA-LEVEL GRADING

More information

MODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS

MODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS OWNER'S MANUAL MODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors

More information

RVT SERIES HEAVY DUTY TRIPPING SNOW PLOW

RVT SERIES HEAVY DUTY TRIPPING SNOW PLOW RVT SERIES HEAVY DUTY TRIPPING SNOW PLOW Model: Serial Number: Rev. 10/13 Rylind Manufacturing, Inc. 2801 Youngfield St Suite 250 Golden, CO 80401 Main Offices: 303-979-3548 Manufacturing Plant: 970-522-2859

More information

MODEL 5500 Tire Repair Station

MODEL 5500 Tire Repair Station MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 P/N: 81-0047C TABLE OF CONTENTS SAFETY

More information

485 BACKHOE OPERATOR S MANUAL

485 BACKHOE OPERATOR S MANUAL 485 BACKHOE OPERATOR S MANUAL SERIAL NUMBER: Manual Number: OM707 Part Number: 75607 MODEL NUMBER: Rev. 2 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States of America 10718

More information

I-130 XL PARTS MANUAL Introduced 4/01/01

I-130 XL PARTS MANUAL Introduced 4/01/01 I-130 XL PARTS MANUAL Introduced 4/01/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL

More information

Vacuum Attachment Patented Sweepster Serial Number Manual Number: Release Date: February 2013 Rev. 3

Vacuum Attachment Patented Sweepster Serial Number Manual Number: Release Date: February 2013 Rev. 3 Vacuum Attachment Patented Sweepster Serial Number Manual Number: 51-4022 Release Date: February 201 Rev. 800-456-100 www.paladinlcg.com Sweepster 2800 N. Zeeb Rd., Dexter, MI. 4810 United States of America

More information

MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES PARTS MANUAL SECTION 19

MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES PARTS MANUAL SECTION 19 EWR MODELS EWR820, EWR1023, EWR1227 PULL TYPE HAY RAKES Published 04/11 PARTS MANUAL SECTION 19 MATERIAL HANDLING PARTS MANUAL PARTS ORDERING GUIDE The following instructions are offered to help eliminate

More information

MODEL EF Full Circle Tire Spreader

MODEL EF Full Circle Tire Spreader MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION

More information

OPERATOR'S & PARTS MANUAL

OPERATOR'S & PARTS MANUAL 1. OPERATOR'S & PARTS MANUAL FOR MINI TILT ATTACH PLATE INSTRUCTIONS NUMBER: 76214 1.888.888.1085 I www.spartanequipment.com Joppa, MD 21085 United States of America 2. TILT ATTACH ASSEMBLY 10522 3-7 -06

More information

GX920XT Ranchho Backhoe S/N 3920XT13 TO S/N 3920XT20

GX920XT Ranchho Backhoe S/N 3920XT13 TO S/N 3920XT20 GX90XT Ranchho Backhoe S/N 90XT TO S/N 90XT0 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing old,

More information

HF4145 FOLDING MULTI-POSITION WORKOUT BENCH

HF4145 FOLDING MULTI-POSITION WORKOUT BENCH HF4145 FOLDING MULTI-POSITION WORKOUT BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0406-001 Customer Service (800) 548-5438

More information

HYDROBURST HB3038, HB5058, HB80, HB125

HYDROBURST HB3038, HB5058, HB80, HB125 TM HYDROBURST HB3038, HB5058, HB80, HB125 Parts Manual HYDROBURST HB3038, HB5058, HB80 & HB125 s/n Part No. PM1251 INTRODUCTION HOW TO USE THE MANUAL This manual contains illustrations and parts list of

More information

LX115 Timber Talon Grapple Parts Manual

LX115 Timber Talon Grapple Parts Manual EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.embmfg.com LX115 Timber Talon Grapple Parts Manual Starting with S/N 115X1 to 115X50 Models

More information

Sweepster Serial Number Manual Number: Release Date: February 2008 Serial Number and up

Sweepster Serial Number Manual Number: Release Date: February 2008 Serial Number and up WSP24 Walk Behind Sweeper Sweepster Serial Number Manual Number: Release Date: February 2008 Serial Number 0807001 and up 800-456-7100 www.paladinlcg.com Sweepster 2800 N. Zeeb Rd., Dexter, MI. 48130 United

More information

KMW Parts List

KMW Parts List 08/ PART NUMBER DESCRIPTION LIST PRICE 0595-3084 Decal Warning $5.28 0595-3001 Decal Warning $1.92 0595-3002 Decal Danger $2.28 0595-3003 Decal Warning $2.16 0595-3004 Decal Warning $2.04 0595-3178 Decal

More information

RPD SERIES HEAVY AND SEVERE DUTY SNOW PLOW

RPD SERIES HEAVY AND SEVERE DUTY SNOW PLOW RPD SERIES HEAVY AND SEVERE DUTY SNOW PLOW Model: Serial Number: Rev. 01/14 Rylind Manufacturing, Inc. 2801 Youngfield St Suite 250 Golden, CO 80401 Main Offices: 303-979-3548 Manufacturing Plant: 970-522-2859

More information

Backhoe Dingo. Compact Utility Loader. Parts Catalog. Form Number Rev A. Model No and up.

Backhoe Dingo. Compact Utility Loader. Parts Catalog. Form Number Rev A. Model No and up. Form Number 3353-321 Rev A Backhoe Dingo Compact Utility Loader Model No. 23163-250000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the

More information

Pick Up Broom OWNERS/OPERATORS MANUAL. Model Number. Serial Number. Date of Manufacture. To Serial # Phone:

Pick Up Broom OWNERS/OPERATORS MANUAL. Model Number. Serial Number. Date of Manufacture. To Serial # Phone: Pick Up Broom OWNERS/OPERATORS MANUAL Model Number. Serial Number. Date of Manufacture. To Serial #039 Phone: 77-37-6 //0 Warranty Skid Pro products are warranted to be free from defects, in workmanship,

More information

INSTALLATION, OPERATION, MAINTENANCE & PARTS

INSTALLATION, OPERATION, MAINTENANCE & PARTS OWNER'S MANUAL EXTREME ANGLE CARRIER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors

More information

ELECTRICAL KIT - TC PM

ELECTRICAL KIT - TC PM ELECTRICAL KIT - TC-000013 PM-000080 1 TO THE PURCHASER Congratulations on the purchase of your new DIGGA Electrical Kit! This product was carefully designed and manufactured to give you years of dependable

More information

SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS

SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS OWNER'S MANUAL SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not

More information

SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK

SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK SHEYENNE TELE-BOOM OWNERS MANUAL OPERATOR INSTRUCTIONS PARTS BOOK 701 Lenham Ave. SW PO Box 647 Cooperstown ND 58425 1-800-797-1883 701-797-2700 * 701-797-2584 Fax www.sheyennemfg.com TABLE OF CONTENTS

More information

LIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

LIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Published 08/15 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material

More information

MODEL HD-BTC. Installation, Operation & Repair Parts Information REV041416

MODEL HD-BTC. Installation, Operation & Repair Parts Information REV041416 MODEL HD-BTC Installation, Operation & Repair Parts Information REV041416 TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 DEFINITIONS 1 SPECIFICATIONS 2 INSTALLATION INSTRUCTIONS 2 OPERATING INSTRUCTIONS 2 MAINTENANCE

More information

MG12K24T60V4 Mechanical Grapple

MG12K24T60V4 Mechanical Grapple 170 State Route 271 Attachment Solutions MG12K24T60V4 Mechanical Grapple Operators Manual KENCO Mechanical Grapple Operation Manual 1 TABLE OF CONTENTS 170 State Route 271 Section I. General Information....

More information

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No. Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol

More information

MODEL EB-3 (SO1 & SO3)

MODEL EB-3 (SO1 & SO3) OWNER'S MANUAL MODEL EB-3 (SO1 & SO3) INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural

More information

OPERATOR S AND PARTS MANUAL STANDARD FLOW COLD PLANER

OPERATOR S AND PARTS MANUAL STANDARD FLOW COLD PLANER OPERATOR S AND PARTS MANUAL STANDARD FLOW COLD PLANER Serial Number: Model Number: Manual Number: MR05660 Part Number: LAF5412 & LAF5413 Date: September 2013 Rev. 2 800-456-7100 I www.paladinattachments.com

More information

MDP Multi-Directional Folding-V Snow Plow

MDP Multi-Directional Folding-V Snow Plow MDP Multi-Directional Folding-V Snow Plow Model Number: Serial Number: Rev. 10/13 Rylind Manufacturing, Inc. 2801 Youngfield St Suite 250 Golden, CO 80401-2263 Business/Sales Offices: 303-979-3548 Manufacturing

More information

MODEL L/R/EF Sectional Tire Spreader

MODEL L/R/EF Sectional Tire Spreader MODEL L/R/EF Sectional Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV08032016 P/N: 81-0195E TABLE

More information

OPERATOR S & PARTS MANUAL X-SERIES EARTH AUGER

OPERATOR S & PARTS MANUAL X-SERIES EARTH AUGER OPERATOR S & PARTS MANUAL X-SERIES EARTH AUGER X950, X1450, X1950, X2450, X1455 X1955 X1200, X1600, X2200, X3450, & X4450 X975, X1475, X1975, X2475, X3575 SERIAL NUMBER: Manual Number: 22681 MODEL NUMBER:

More information

4750 Drill. Repair Parts

4750 Drill. Repair Parts 4750 Drill Repair Parts #615997-2016 Identification Your CrustBuster drill is identified by a Serial Number and Model Number. Record these numbers in the spaces provided in this manual and refer to them

More information

PART'S MANUAL 3-POINT POSTHOLE DIGGER 130P, 240P, 340P, & 440P

PART'S MANUAL 3-POINT POSTHOLE DIGGER 130P, 240P, 340P, & 440P 3-POINT POSTHOLE DIGGER 130P, 240P, 340P, & 440P Rev 05-07 PART'S MANUAL Part No. 01430870P An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral

More information

RMH1000M-HD ROUND MODULE HANDLER

RMH1000M-HD ROUND MODULE HANDLER RMH000M-HD ROUND MODULE HANDLER CAT90 9th EDITION Beginning Serial No: 0000 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS CAT90 9th Edition January, 08 RMH000M-HD

More information

Illustrated Parts Breakdown Manual EZ LOADER. Model EZ12 (Pre-01/08)

Illustrated Parts Breakdown Manual EZ LOADER. Model EZ12 (Pre-01/08) Illustrated Parts Breakdown Manual EZ LOADER Model EZ12 (Pre-01/08) Xtreme Manufacturing 1415 West Bonanza Road Las Vegas, NV 89106 (702) 858-2404 www.xtrememanufacturing.com Copyright 2008 By Xtreme Manufacturing

More information

OPERATOR S AND PARTS MANUAL X6075 / X8075 / 8K2 HIGH TORQUE & TWO SPEED AUGER DRIVES

OPERATOR S AND PARTS MANUAL X6075 / X8075 / 8K2 HIGH TORQUE & TWO SPEED AUGER DRIVES OPERATOR S AND PARTS MANUAL X6075 / X8075 / 8K2 HIGH TORQUE & TWO SPEED AUGER DRIVES SERIAL NUMBER: MODEL NUMBER: Manual Number: OM723 Part Number: 75623 Rev. 800-456-7100 I www.paladinlcg.com 503 Gay

More information

B-BP-4 BALLPARK 4 GROOMER

B-BP-4 BALLPARK 4 GROOMER B-BP-4 BALLPARK 4 GROOMER TABLE OF CONTENTS 01 Ballpark 4 Cover Page 02 Table of Contents 03 Warranty 04 General Information & Tool Functions 05 Tool Adjustments & Basic Maintenance 06 How to Use the Ballpark

More information

365 BACKHOE OPERATOR S MANUAL

365 BACKHOE OPERATOR S MANUAL 365 BACKHOE OPERATOR S MANUAL SERIAL NUMBER: Manual Number: OM702 Part Number: 75602 MODEL NUMBER: Rev. 3 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States of America 10655

More information

BB60, BB72, & BB84 BUCKET BROOMS

BB60, BB72, & BB84 BUCKET BROOMS BB60, BB72, & BB84 BUCKET BROOMS OM611 8590 10-18-04-3 REV. 3 With Volumizer OPERATOR'S & PARTS MANUAL 75511 BRADCO P.O. Box 266 Delhi, Iowa 52223 USA (563) 922-2981 (800) 922-2981 Fax 563-922-2130 TABLE

More information

ALUMINUM & STEEL CAR CARRIERS

ALUMINUM & STEEL CAR CARRIERS OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions... TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower

More information

MODEL 5120 Tire Repair Station

MODEL 5120 Tire Repair Station MODEL 5120 Tire Repair Station 00-0049 Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV01182017 P/N: 81-0058G CAUTION

More information

OPERATOR S MANUAL 611B BACKHOE

OPERATOR S MANUAL 611B BACKHOE OPERATOR S MANUAL 611B BACKHOE SERIAL NUMBER: MODEL NUMBER: Manual Number: OM854 Part Number: 75754 Rev. 800-456-7100 I www.paladinattachments.com 503 Gay Street, Delhi, IA 52223, United States of America

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS EMB Manufacturing Inc. 4144 Boomer Line St. Clements, Ontario N0B 2M0 Canada www.wallensteinequipment.com INSTALLATION INSTRUCTIONS Contents 1. Safety...2 2. Warranty...3 3. Parts Breakdown...4 4. Procedure...5

More information

JOHN DEERE 9970 COTTON PICKERS

JOHN DEERE 9970 COTTON PICKERS PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West

More information

Boxer 120 Parts Manual

Boxer 120 Parts Manual BIG POWER IN ALL PLACES Boxer Parts Manual Serial No.s 4 & Higher Part No. 45- Phone: Sales - 00--004, Parts and Service - 00-55-9 www.boxerequipment.com Morbark, Inc. 50 S. Winn Rd., P.O. Box 00, Winn,

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )

Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G ) 2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum

More information

BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO

BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this

More information

SERIAL NUMBER: Manual Number: Part Number: MODEL NUMBER: Date:

SERIAL NUMBER: Manual Number: Part Number: MODEL NUMBER: Date: OPERATOR S & PARTS MANUAL SCRAP & BRUSH GRAPPLES SERIAL NUMBER: Manual Number: 0 Part Number: 0 MODEL NUMBER: Date: 9-29-0 00-4-0 I www.paladinlcg.com 0 Gay Street, Delhi, IA 222, United States of America

More information

WARRANTY REGISTRATION AND POLICY

WARRANTY REGISTRATION AND POLICY WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material

More information

OWNERS MANUAL HF4261

OWNERS MANUAL HF4261 OWNERS MANUAL HF4261 ADJUSTABLE AB BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0905-000 Customer Service (800) 548-5438 (858)

More information

FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC

FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200, TA1600 & TA2400 SPRAYERS Serial Number B26720100 & Higher Part No. 407525 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol identifies

More information

40 & 48 TILLERS OPERATOR S AND PARTS MANUAL. Part Number: MODEL NUMBER: Rev. 4

40 & 48 TILLERS OPERATOR S AND PARTS MANUAL. Part Number: MODEL NUMBER: Rev. 4 40 & 48 TILLERS OPERATOR S AND PARTS MANUAL SERIAL NUMBER: Manual Number: OM637 Part Number: 75537 MODEL NUMBER: Rev. 4 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA 52223, United States

More information

Mulching and Finishing Mowers MP and FP

Mulching and Finishing Mowers MP and FP Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)

More information

PARTS LIST. Guardian VR-Series. Material Pumps

PARTS LIST. Guardian VR-Series. Material Pumps PARTS LIST Guardian VR-Series Material Pumps Table Of Contents Section 1 General Information 1:0 Technical Information... 1 1:1 Assembly Drawings... 5 1:2 Sub Assembly Drawings... 16 1:3 Maintenance...

More information

B-DM-6 Diamond Master Operation & Parts Manual Model no.: B-DM-6

B-DM-6 Diamond Master Operation & Parts Manual Model no.: B-DM-6 B-DM-6 Diamond Master Operation & Parts Manual Model no.: B-DM-6 TABLE OF CONTENTS 01 Cover Page 02 Table of Contents 03 Warranty 04 Diamond Master Information & Basic Maintenance 05 Adjustment of Tools

More information

211 / 212 INSTALLATION, OPERATION, MAINTENANCE & PARTS

211 / 212 INSTALLATION, OPERATION, MAINTENANCE & PARTS CENTURY L E G E N D A R Y L E A D E R S H I P OWNER'S MANUAL 211 / 212 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified

More information

PARTS CATALOG FOR. Mud Hog Rear Wheel Drive FOR. MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES

PARTS CATALOG FOR. Mud Hog Rear Wheel Drive FOR. MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES PARTS CATALOG FOR Mud Hog Rear Wheel Drive FOR MF 9540/9550/9560, CAT 540C/550C/560C, Gleaner A540/A560, Fendt 6450R/9480R COMBINES Mud Hog Model Number: AG9896 A Product of Tuthill Drive Systems P.O.

More information

3K2 EARTH AUGER OPERATOR S & PARTS MANUAL

3K2 EARTH AUGER OPERATOR S & PARTS MANUAL 3K2 EARTH AUGER OPERATOR S & PARTS MANUAL SERIAL NUMBER: Manual Number: 24523 MODEL NUMBER: Date: May 16, 2005 800-922-2981 www.paladinbrands.com P.O. Box 266, Delhi, IA 52223-0266, United States of America

More information

ASSEMBLY MANUAL SMC 2491 LOADER VALVE AND PLUMBING KIT INSTRUCTIONS KUBOTA TRACTORS

ASSEMBLY MANUAL SMC 2491 LOADER VALVE AND PLUMBING KIT INSTRUCTIONS KUBOTA TRACTORS ASSEMBLY MANUAL Keep With Loader Operator's Manual SMC 2491 LOADER VALVE AND PLUMBING KIT INSTRUCTIONS KUBOTA TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB L5450 X X Valve and plumbing kit can be installed

More information

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)

More information

GERINGHOFF. Corn Header Manual f HEADSIGHT.COM

GERINGHOFF. Corn Header Manual f HEADSIGHT.COM GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com

More information

3509 & 3511 BACKHOE 3-POINT HITCH / CATEGORY II OPERATOR S MANUAL. Part Number: MODEL NUMBER: Rev. 4

3509 & 3511 BACKHOE 3-POINT HITCH / CATEGORY II OPERATOR S MANUAL. Part Number: MODEL NUMBER: Rev. 4 3509 & 3511 BACKHOE 3-POINT HITCH / CATEGORY II OPERATOR S MANUAL SERIAL NUMBER: Manual Number: OM608 Part Number: 75508 MODEL NUMBER: Rev. 4 800-456-7100 I www.paladinlcg.com 503 Gay Street, Delhi, IA

More information

V-90 / V-100 INSTALLATION, OPERATION, MAINTENANCE & PARTS

V-90 / V-100 INSTALLATION, OPERATION, MAINTENANCE & PARTS OWNER'S MANUAL V-90 / V-100 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only,

More information

REPAIR PARTS MANUAL MODEL NUMBER PM85 (MFG. ID. NO ) Snow Thrower Rev SR Printed in U.S.A.

REPAIR PARTS MANUAL MODEL NUMBER PM85 (MFG. ID. NO ) Snow Thrower Rev SR Printed in U.S.A. MANUAL MODEL NUMBER PM8 (MFG. ID. NO. 990000) Snow Thrower 3 0 8-3 Rev. 0.08.09 SR Printed in U.S.A. AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. PM8 (990000), PRODUCT NO. 9 9 00-0 3 0 9

More information